Database Users

Invalid Vendor Id and upgrade to wm6

i have the c800 with rom 1.7 , i would like to upgrade to newer version at 1.8 but at 2 % was stoping with note : INVALID VENDOR ID
Can somebody help me to this problem, i would like to upgrade to wm 6 and need the radio version more than 2.71 instead the original asia at 2.69
This lowest version make the signal always keep searching on gsm..with wm 6 os , really sad for this problems..hoping somebody can help this problem

Invalid Vedor ID means that your device is CID-locked, so you can only flash official ROM's to your phone. You can however unlock your phone at imei-check.co.uk.. BUT a person has already bricked his device with this, because it did not work properly! At this tim of speaking there is no alternative for CID-unlocking.

CID unlock...
...i have an Herald to. The OS was in finish(i think)...the only way i found to write an WWE OS...wrote to IM CHECK.CO.UK...in same day send me the application for my IMEI to unlock. I made the unlock under Vista Home Premium...now i have a brand new WWE OS in my HERALD.
Try it...it realy work.

CID unlock...
http://www.imei-check.co.uk/

But the CID unlock for what is? It's for a phone which is blocked to a company?

benmuliono888 said:
HELP PLEASE
Click to expand...
Click to collapse
Why are you posting like you have the solution and instead you are looking for help?
If you do so, only people with same problem like you will read your post!!!!
Christian

schumy said:
But the CID unlock for what is? It's for a phone which is blocked to a company?
Click to expand...
Click to collapse
For the lock that is set by the company indeed

benmuliono888 said:
HELP PLEASE
Click to expand...
Click to collapse
The title of your thread is a little bit too optimistic don't you think? If you have the solution, kudos! But if not, please watch your title.. I almost jumped a hole in the ozon layer, but too bad...

need help ( german to english)
hi
i have a german os herald need to convert it to english...have tried every thing cid unlock and all ..is shows invalid vendor id..please i m dying to use this phone i v bought it with my hard earned money..... somebody please help me ...

kunalg7 said:
hi
i have a german os herald need to convert it to english...have tried every thing cid unlock and all ..is shows invalid vendor id..please i m dying to use this phone i v bought it with my hard earned money..... somebody please help me ...
Click to expand...
Click to collapse
While the phone is on, press the soft reset button with the stylus while holding the camera button. You should then see a tri-colored screen(this is the bootloader mode, to exit simply soft reset again). What version does it say next to IPL? If it is 4.0 or higher, you need to flash HardSPL, found here. Don't do it anyway if your IPL is lower than that, it will turn your phone into an expensive doorstop. If you do have the right IPL, then proceed to flash the HardSPL, then choose your ROM and install it. However keep in mind, you won't be able to install any official ROMs while HardSPL'd. But official ROMs suck anyway.

necessary stuffs ...

Well, necessary stuff is USPL.
A stock ROM will also be nice.

dont have one (well have one on my phone)... wouldnt know how to get it off the phone either...so ill leave that for someone else
maybe you can post it suracha?

What do we need?
We need help from an XDA-Developer to create USPL for unlock our device so we can flash unOfficial ROM, I have never worked on this.
So far, I can read the ROM from device and play with it. I believe this is at the same progress as GUIGOU's work. BTW, he also hosts his works on the internet. You may review following threads ...
HTC 3470 (Pharos) Orange French Dump
HTC P3470 Pharos : Searching an Backup Rom
In order to play with customized ROM, I also need Official ROM to re-flash my device ... just in case, you know.
I asked htc Asia last week about an Official ROM, they said the device is new, they may release Official ROM in the future but not now.
I think we should talk to an XDA-Developer who ever made USPL for some device. We do need it !!!

Pharos ROM to Create
I've come across this http://forum.xda-developers.com/showthread.php?t=334667

Pharos ROM to Create
I've come across this http://forum.xda-developers.com/showthread.php?t=334667
It is a technique called JumpSPL. Sound good to me for start fooling with my Pharos. (Thank Pof)
quote from the original post says
Notes on patching & testing custom SPLs:
* Disassemble the SPL using radare (free) or IDA Pro (commercial).
* You need to press the bootloader buttons after loading your custom SPL with JumpSPL, otherwise device will reboot. You can also patch the SPL to enter bootloader mode automatically, so you don't have to press the buttons.
* Some devices require that you unplug and re-plug the USB cable after the SPL has been loaded.
* On some devices (TI OMAP) you'll see a white screen instead of the usual tri-color screen, don't worry about that, you're in bootloader mode.
* Use patched SPLs with caution, try to flash splash screens to do the initial tests and avoid bricking your device.
* To know the jump address you can use itsutils 'pmemdump -p' and try to find a copy of the SPL in memory. You can find the virtual address with dumpromx.exe.
I try both bkondisk = http://forum.xda-developers.com/archive/index.php/t-285003.html and pdocread => http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom in order to get my SPL.
Now I am unsuccessfully locating Pharos' SPL...... Worse, I have known of neither Radar or IDA Pro. so That would take a long while until I can convince myself to try the JumpSPL.
Post back if I get any progess.
PS.. to Suracha.. if DopodAsia don't release one soon, don't U think some technical guy at SIS Distribution (Thailand) will have one? if U know some one inside....worth try asking for luck.

bita said:
PS.. to Suracha.. if DopodAsia don't release one soon, don't U think some technical guy at SIS Distribution (Thailand) will have one? if U know some one inside....worth try asking for luck.
Click to expand...
Click to collapse
Yep, I am thinking about that.
Hopefully, they should have one.

good progress!
I personally am new to the pda thing, but with proper how to's Id like to tinker with the Pharos.
I saw a thread where an older htc was said to have gps built in but not activated... you can do a search but also check this thread http://forum.xda-developers.com/archive/index.php/t-293182.html
so it might be the case that we have wifi and 3g but simply disabled.. just like in the touch (elf)
would be cool if this was the case huh?

Got it
bita said:
PS.. to Suracha.. if DopodAsia don't release one soon, don't U think some technical guy at SIS Distribution (Thailand) will have one? if U know some one inside....worth try asking for luck.
Click to expand...
Click to collapse
bita, follow the link to thread ... Official ROM 1.11.707.1

Thank Suracha
U are excellent.
I'll be keep fooling my ROM....

[Error 300] INVALID UPDATE TOOL!!! Is there any fix

Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?

nauman said:
Mods, Developers, Seniors...
Anyone know how to get around with the Error 300 Invalid update Tool, problem?????
I think we can donate(maybe pay will be appropriate in this case ) to the developers who bring out a fix for it.
My Device gets only into the bootloader mode. When flashing the original ROM from DOPOD SEA WM6 WWE SHIP, it gets to the progress screen and @ 0% the RUU gives the Error 300.
Tried the SD Card flash method also, no luck!
I beleive the CID area is corrupt!!!
I had downloaded a tool to change the splash screen image, didn't used it, but by mistake the EnterBootLoader.exe (SPLJump) got executed and screwed the device
Been through the forum, but no help at all
Any takers?
Click to expand...
Click to collapse
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned

farukb said:
it may be original rom,but does it have correct cid
1.you can get right rom by registration at manufacturers site
2.you can download one from wiki or forum,but in this case you will have to cid unlock your device,you have to download artemis uspl from artemis upgrading thread and than flash any rom you want,just be carefull to flash a rom that is for artemis,because flashing any other rom will brick your device
3.uspl the device and flash the rom you mentioned
Click to expand...
Click to collapse
I have the original ship ROM "P800w_SEA_ENG_WM6_Upgrade_20070713", even that fails with the same error message.
My device is already unlocked using the artemis uspl and I have used several ROMs earlier!!!!

anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.

corepda said:
anyone with this fix? I am getting the same error on my friends artemis. No help hitherto solved the problem. I wish if someone could really get on to it & get me the solution.
Click to expand...
Click to collapse
I sent my device to HTC service center and go it resolved. That is the only thing which worked for me after a couple of weeks searching in the forums and no solution. But the HTC SC buggers replaced my device entirely and gave me back an old **** device . So also keep this in mind. you won't be sure, if you get your original device back after the so called repair. HTC SC in India is super *****y, had a bitter experience!
Now I have moved to TD2, know that I was at loss, but am happy to have a shiny new TD2

Service Centre at Mumbai Sucks Big Tym....
HTC service centre at mumbai sucks big time....
they said they can't replair my cell n it has a HARDWARE ISSUE!!!
stupid lasses....
What can we do here getting the same error....
Tried MMC method, nothing!
HOW CAN THERE BE NO SOLUTION TO THIS PROBLEM??????????

no have solution this problem ???
stupid ! CID area !!! STUPID HTC ---

windows mobile

help me please and give me a windows mobile 6.1 for G4 Qtek 9100 device.i've searched the xda section for windows mobile 6.1 but i can't decide what is good and what is bad.

Visit This Link
Men visit this link
http://forum.xda-developers.com/showthread.php?t=427328
I can tell you that roms arent good or bad... in every device we have diferent issues believe me... and everyone can said this is good to me but somebody said its the worst one! why?... cause its their points of view... be sure you have everything to upgrade before do it ok?
good luck.

thanks for the link.i have downloaded from there but i only have an nk.nbf.how can i install this.i know i'm a complete n00b.

Dont said that men!
All of the people you can see as a Senior one day we were noobs hahaha
Search on the brushed metal by noonski ROM in post number 82 i have attached A RUU just copy your nk.nbf to the file unzipped and run the RUU xp if it doesnt works run the normal RUU. in this link:
http://forum.xda-developers.com/showthread.php?t=429327&page=9
good luck... are you sure you are hard SPL? apply it... or make a soft SPL

Thank you for your answer.I have choosen this rom http://forum.xda-developers.com/showthread.php?t=355591.
I have a Qtek 9100 and it is G4.I will run first hard spl, unlock it and then install the rom above.I think this is ok,or i miss something ?

Mmmmm
CocoSS said:
Thank you for your answer.I have choosen this rom http://forum.xda-developers.com/showthread.php?t=355591.
I have a Qtek 9100 and it is G4.I will run first hard spl, unlock it and then install the rom above.I think this is ok,or i miss something ?
Click to expand...
Click to collapse
Its an old rom but if it is of your likely... first read the way to upgrade in G4 section of wizard forum maybe you miss a step...
Good luck the new ERA of Roms are the included Manila 2D in it... so give it a try is most prettier.
Good luck men.

i've choosen this one because i red that it is very stabile and i pretty need this now.i wil try to read more, but more likely tomorrow i'll try to install it

i've tried to install a new rom on my wizard and i got this error: "This update utility cannot be used for your PDA Phone.Please get newer update Update Utility."my phone enters bootload before giving this error.

sorry.i found out alone what was all about.succefully installed wm6.1 on my wizard

Good work
CocoSS said:
sorry.i found out alone what was all about.succefully installed wm6.1 on my wizard
Click to expand...
Click to collapse
Enjoy it men!!!

it seems my rom upgrade haven't solved one of my major problems.The GPRS connection is not working.I'm connecting to the network (Vodafone) but if i want to browse the internet internet explorer says :"The page cannot be found.Check the name and try again".

Most of roms
Most of roms has this kind of prob, cause the ccokers said that is better to conect via WIFI or USB stills a problem... but you can try and try again
One more thing maybe your carrier Configuration have missing something... acharacter... a number a dot..... i dont know men!

what do you mean about "try and try again "...different rom or what ?

Of course!
Of course men! try a new one when you think it doesnt reach what you want.

Problems with phone

I haven't used my Touch HD in a very long time and when I turn it on now (dont remember what happened) it says upgrade ROM code error please try again. Does HTC have an upgrade for it? I live in the US and their site doesn't show anything about the phone, used europe site but gave me a no updates for that serial number. I am guessing that a stock ROM from HTC would fix this problem as the phone is not unlocked.

Shipped roms can be found here. Hope this helps.

If you receive "Upgrade ROM code error" then you will need to flash original stock rom which was on your device, i.e. not any stock rom but the original one. Your original stock rom should flash whether it says 'usb' or 'serial' at bottom of bootloader.
Link to stock roms has been provided in post above

Thanks
Thanks a lot, I haven't used that phone for probably a year so I hope that fixes it. I cannot wait to use that phone again, since I paid good money for it.

Hallo.
I flashed the Energy.BLACKSTONE.29020.Sense2.5.GER.Cookie.2.0.Touch.Of.Glass.Jun.02.
Now the phone find no connect.
I use an HTC BLACKSTONE.
I hope you can help me.
Sorry for my bad english.
Best regards
Matthias

make007 said:
Hallo.
I flashed the Energy.BLACKSTONE.29020.Sense2.5.GER.Cookie.2.0.Touch.Of.Glass.Jun.02.
Now the phone find no connect.
I use an HTC BLACKSTONE.
I hope you can help me.
Sorry for my bad english.
Best regards
Matthias
Click to expand...
Click to collapse
Did you follow this guide and put either USPL or HSPL on your device first?
Before flashing anything, its always best to read the stickies (thread stuck at top of each forum which provide guides, references etc). My advice would be to read this