windows mobile - 8125, K-JAM, P4300, MDA Vario General

help me please and give me a windows mobile 6.1 for G4 Qtek 9100 device.i've searched the xda section for windows mobile 6.1 but i can't decide what is good and what is bad.

Visit This Link
Men visit this link
http://forum.xda-developers.com/showthread.php?t=427328
I can tell you that roms arent good or bad... in every device we have diferent issues believe me... and everyone can said this is good to me but somebody said its the worst one! why?... cause its their points of view... be sure you have everything to upgrade before do it ok?
good luck.

thanks for the link.i have downloaded from there but i only have an nk.nbf.how can i install this.i know i'm a complete n00b.

Dont said that men!
All of the people you can see as a Senior one day we were noobs hahaha
Search on the brushed metal by noonski ROM in post number 82 i have attached A RUU just copy your nk.nbf to the file unzipped and run the RUU xp if it doesnt works run the normal RUU. in this link:
http://forum.xda-developers.com/showthread.php?t=429327&page=9
good luck... are you sure you are hard SPL? apply it... or make a soft SPL

Thank you for your answer.I have choosen this rom http://forum.xda-developers.com/showthread.php?t=355591.
I have a Qtek 9100 and it is G4.I will run first hard spl, unlock it and then install the rom above.I think this is ok,or i miss something ?

Mmmmm
CocoSS said:
Thank you for your answer.I have choosen this rom http://forum.xda-developers.com/showthread.php?t=355591.
I have a Qtek 9100 and it is G4.I will run first hard spl, unlock it and then install the rom above.I think this is ok,or i miss something ?
Click to expand...
Click to collapse
Its an old rom but if it is of your likely... first read the way to upgrade in G4 section of wizard forum maybe you miss a step...
Good luck the new ERA of Roms are the included Manila 2D in it... so give it a try is most prettier.
Good luck men.

i've choosen this one because i red that it is very stabile and i pretty need this now.i wil try to read more, but more likely tomorrow i'll try to install it

i've tried to install a new rom on my wizard and i got this error: "This update utility cannot be used for your PDA Phone.Please get newer update Update Utility."my phone enters bootload before giving this error.

sorry.i found out alone what was all about.succefully installed wm6.1 on my wizard

Good work
CocoSS said:
sorry.i found out alone what was all about.succefully installed wm6.1 on my wizard
Click to expand...
Click to collapse
Enjoy it men!!!

it seems my rom upgrade haven't solved one of my major problems.The GPRS connection is not working.I'm connecting to the network (Vodafone) but if i want to browse the internet internet explorer says :"The page cannot be found.Check the name and try again".

Most of roms
Most of roms has this kind of prob, cause the ccokers said that is better to conect via WIFI or USB stills a problem... but you can try and try again
One more thing maybe your carrier Configuration have missing something... acharacter... a number a dot..... i dont know men!

what do you mean about "try and try again "...different rom or what ?

Of course!
Of course men! try a new one when you think it doesnt reach what you want.

Related

New Kitchen online....

Hello XDA-Users.
Now i´ve got my new internet connection and i think it´s time to share it with you. I set up a ROMkitchen for the good old XDA I.
It might me an alternative to the kitchen of Yorch.
In the moment i would say my kitchen is not perfect, but who is perfect?
The workspaces are limited, since i´m only using an good old PII with 266Mhz and 64MB RAM. Maybe in the future i will upgrade it.
Also there is a limitation in "Opening Hours". It will be available from Mo. - Fr, 8pm - 8am and all of the weekend. Timezone is Europe / Berlin.
If you´re out of time you will see it soon, with an different layout.....
If there are problems, hints, or wishes concernign the kitchen, please write me an PM.
The Link to the Kitchen is:
http://lumpistefan.dyndns.org/
Hope it will work allt he time....
Stefan
PS: Who wants me to add some software or maybe will donate me some better hardware can contact me via Email [email protected]
Thank you, but where can I find a french rom ?
THis is cool alternative to Yorch site
Which ROM is the original AT&T WM2003 (i.e. not BETA/ Test version)?
Are the software such as Omegaone BatteryPack , Spb softwares etc. etc. demo version or already registered?
thanks
is it just me or does this thing take along time to make a rom ive tried 2 times waited like 10 min but nothing still says making rom....
kitarolivier said:
Thank you, but where can I find a french rom ?
Click to expand...
Click to collapse
Don´t know where you find a french rom....
But i´m also interested to insert it into my kitchen....
andhy said:
THis is cool alternative to Yorch site
Which ROM is the original AT&T WM2003 (i.e. not BETA/ Test version)?
Are the software such as Omegaone BatteryPack , Spb softwares etc. etc. demo version or already registered?
thanks
Click to expand...
Click to collapse
The software are the demo-Version, so you need to registrate dem to use it unlimited....
gazzaman2k said:
is it just me or does this thing take along time to make a rom ive tried 2 times waited like 10 min but nothing still says making rom....
Click to expand...
Click to collapse
That´s what i meant with poor Hardware.
Just in teh moment i´ve got:
Load Averages 3.66 3.81 3.03
I think it will be better using an faster processor and more RAM.
If anyone have better hardware and a fine Internetconnection, I will help to transfer this Kitchen to him.
I preffer an Debian Linux to install it....
HTH
Stefan
no worries working now downloading as i speak lol crappy 56k modem i blame lol :roll:
wow how did u manage to fit Voice Command and Calligrapher in there,, not sure if they work as i an still cooking mine (as i type) but when i chech/uncheck the s/w it does not affect the rom usage???
tagenda !! excellent today plugin plz try to add it if possible is a freeware
http://www.freewareppc.com/utilities/tagenda.shtml
also total commander (excellent file browser) http://www.freewareppc.com/utilities/totalcommander.shtml
If those file sizes are correct they wont fit into the available space, I have chosen the voice command and the available space stays the same, it will be interesting to see what kind of it produces. Regarding the tomtom, how will the reg code work if its in rom, and also how will it be affected when updates from tomtom have to be applied.
built my rom and 100% totally happy with it cheers LumpiStefan for allowing me to make one
one program the kitchen could really do with....
Button plus v2.0 from yorchs site in thedownlaods section
i dont think voice commands or the vb files will fit into the rom
also no point in putting tomtom gps in as when you come to update it you wont be able to meaning a new rom will have to be cooked without this in
cant get connect 4 or snake to work even with the runtime file things they just dont load up
but great work man keep it up
If you want to add software that requires a key, you have to add the complete "group" firts. if you don`t select "add Software that needs to register" the sotware won´t be added, and because of this, the required space won´t change....
HTH
Stefan
Hi, can you describe which rom works with O2/europe T-mobile and which rom is for USA market?
thx
Hi,
I just cooked my own rom, and added GPRS-Monitor and Pocketplus. Pocketplus is installed correctly, including the today-plugin, GPRS-Monitor works, but without the today-plugin. Is there anybody out who can tell me how to get the plugin?
Bye, Dennis.
GSM tools said:
Hi, can you describe which rom works with O2/europe T-mobile and which rom is for USA market?
thx
Click to expand...
Click to collapse
All this ROMS are working with all the devices. Difference between Europe and USA are the radio stacks, that ar not included with the ROM...
HTH
Stefan
ok, so the latest rom A.30.09 ENG is safe flash to any device XDA1?
LumpiStefan said:
GSM tools said:
Hi, can you describe which rom works with O2/europe T-mobile and which rom is for USA market?
thx
Click to expand...
Click to collapse
All this ROMS are working with all the devices. Difference between Europe and USA are the radio stacks, that ar not included with the ROM...
HTH
Stefan
Click to expand...
Click to collapse
Will you be adding the official WM2003 upgrade from Siemens/ATT.
cruisin-thru said:
Will you be adding the official WM2003 upgrade from Siemens/ATT.
Click to expand...
Click to collapse
The A30.09 must be the official VErsion from Siemens/AT&T....
Stefan
My eyes are failing or something, I see it now, thanks.
Thanks. I've been looking for 4.01.00 in a Kitchen.
Please help as the d/l button never appears.
ebswift said:
Bah, I click the button to build the ROM, it goes through the making process... then nothing . I dunno about it being slow, but I left it overnight. It'd be faster to row a boat over there, copy it onto my USB disk and row back.
How can I get this kitchen to work?
Click to expand...
Click to collapse
why dont u freaking do it... get the boat out and set SAIL
this guy is trying to contribute for free... and spending his time/money for ur benifit and u still complaiin... ppl have managed to get ROMS, i have too so obviousely it seems to be USER ERROR!!!
plz get a life and be more polite, ask what us did wrong instead of blaming the kitchen
lets see u set one kitchen up for 2 hrs only... then u will know the pains it takes...
just get it to run then we will talk abt letting others get to it....

Radio Rom 2.67.90

I have been reading rumors about this Radio Rom. If it does exist, what rom is it from. If some one can tell me i'll extract and test it.
look in artemis forum, they got the 2.67.9 radio rom in the latest artemis rom. we shoul b able to use it no problem. im willing to try it out 1st if anyone able to extract it.
Radio ROM 02.67.90
rdboyce said:
I have been reading rumors about this Radio Rom. If it does exist, what rom is it from. If some one can tell me i'll extract and test it.
Click to expand...
Click to collapse
Well since I could not find it, I decided to cook it myself. Thanx to Pof and risidoro for your help and scripts. Good looking out Pof.
ftp://xda:[email protected]/RadioRom/Prophet_G4_RadioRom_v2.67.9.exe
Disclaimer: THIS IS A COOKED ROM AND THUS IT MAY CAUSE SEVERE DATA LOSS OR EVEN IRREMEDIABLY DAMAGE YOUR DEVICE!
THE AUTHOR, NOR EVERY OTHER PERSON INVOLVED (E.G. THE ROM TOOLS DEVELOPERS), SHALL NOT BE HELD RESPONSIBLE FOR ANY MALFUNCTIONS OR DAMAGES THIS PROCEDURE MAY CAUSE.
so did someone try it? i heard new versions were very bad for the battery life, hope this one is better.
i did.. but im using wizard. somehow not compatible. should be able to use. i dunno if rdboyce pulled it out from the artemis or not but it dun work. it didnt crashed the phone thou so no harm in trying. you can flash it back to 2.26 or 2.47 if dun work
rdboyce said:
Well since I could not find it, I decided to cook it myself. Thanx to Pof and risidoro for your help and scripts. Good looking out Pof.
ftp://xda:[email protected]/RadioRom/Prophet_G4_RadioRom_v2.67.9.exe
Disclaimer: THIS IS A COOKED ROM AND THUS IT MAY CAUSE SEVERE DATA LOSS OR EVEN IRREMEDIABLY DAMAGE YOUR DEVICE!
THE AUTHOR, NOR EVERY OTHER PERSON INVOLVED (E.G. THE ROM TOOLS DEVELOPERS), SHALL NOT BE HELD RESPONSIBLE FOR ANY MALFUNCTIONS OR DAMAGES THIS PROCEDURE MAY CAUSE.
Click to expand...
Click to collapse
Is there a G3 version?
Cutefox said:
i did.. but im using wizard. somehow not compatible. should be able to use. i dunno if rdboyce pulled it out from the artemis or not but it dun work. it didnt crashed the phone thou so no harm in trying. you can flash it back to 2.26 or 2.47 if dun work
Click to expand...
Click to collapse
I did pull it from the Artemis and I'm redoing it now. You're right it don't work but it doesn't brick. I looked at the size and the Hex Dump of both and they are similar. The Artemis ROM even had the G3 and G4 IPL and SPL when I decoded the ROM. I had so much hope but no go.
I was considering the Excalibur ROM as well but its bigger than the Prophet/Wizard radio ROMs. I'm more apt Prophet/Wizard Radios are usually around 2.5MB. The Excalibur ROM is 2.8MB. Not sure the the dedicated Radio space on the Prophet but the difference is just enough to brick.
I've already decoded it. If some one wants to try the Excalibur I'll post it.
i dun mind trying excalibur as well.. but redo the artemis 1st. i'll try again once u finish.. if u look at the post in artemis forum it says 2.67 got good battery life.. dat i want!! lol..
Confirming the radio rom does not work as well on my S200
I've created a G3 version for my S200 but it's not working, doesn't find the provider any longer, I'll play around some more, but a no go so far.
Jesterz said:
I've created a G3 version for my S200 but it's not working, doesn't find the provider any longer, I'll play around some more, but a no go so far.
Click to expand...
Click to collapse
I'm the same place after re-extracting it from the Artemis ROM. I'm going to wrap the Excalibur ROM. It'll be posted soon. Anyone wanting to try it, Have fun.
i've changed the header info a bit, but that doesnt seem to help either
Let's try the next ROM
Cutefox said:
i dun mind trying excalibur as well.. but redo the artemis 1st. i'll try again once u finish.. if u look at the post in artemis forum it says 2.67 got good battery life.. dat i want!! lol..
Click to expand...
Click to collapse
OK everyone, this one is built from the Excalibur ROM. For all the brave souls:
ftp://xda:[email protected]/Prophet_G4_RadioRom_v2.63.9 0_Test.exe
I do see that the other ROM was removed so...
If you post a G3 radio rom, I can try it on my Qtek S200...
rdboyce said:
OK everyone, this one is built from the Excalibur ROM. For all the brave souls:
ftp://xda:[email protected]/Prophet_G4_RadioRom_v2.63.9 0_Test.exe
Click to expand...
Click to collapse
Did anyone try the Excalibur build?
rdboyce said:
Did anyone try the Excalibur build?
Click to expand...
Click to collapse
I'll do a test soon, I'm playing with the new AKU 3.2 ROM and made a clean version.
Radio rom upgrade problem!
I upgraded my s200 RadioROM to 2.63.90. Now my Phone lost Radio Rom and lost the GSM signal. The phone become very slow and con't activesync to the pc. I have try but can't upgrade any other rom now! Can someone help me?
I had the same problem! After radio update, Prophet does not connect to the PC anymore. I,ve managed the problem with the following steps, take them exactly:
1. Download the linked file and extract it in a known place: ftp://xda:[email protected]/Uploads/Wizard/2_47_11_radio.rar
2. Disconnect Prophet from the USB cable;
3. Enter in the boot loader mode (press power button + camera button in the same time and hit reset);
4. Connect the cable and in the left down corner the USB name will apear;
5. Go to the directory that you extracted from the downloaded file and start ROMUpdateUtility_Wizard_NoID.exe (is in itallian, but there are the usual steps for upgrading ROM, so I think you'll manage).
After this, hopefully the upgrade Radio ROM process will start!
I'll repet myself, follow exactly this steps with attached file, this was my way and the only that worked for me!
P.S. Someone should delete the 2.63.90 Radio ROM file from th Prophet FTP, is dangerous and brakes your Prophet!
Thanks very much! My Phone has come back!
GOGULETE said:
I had the same problem! After radio update, Prophet does not connect to the PC anymore. I,ve managed the problem with the following steps, take them exactly:
1. Download the linked file and extract it in a known place: ftp://xda:[email protected]/Uploads/Wizard/2_47_11_radio.rar
2. Disconnect Prophet from the USB cable;
3. Enter in the boot loader mode (press power button + camera button in the same time and hit reset);
4. Connect the cable and in the left down corner the USB name will apear;
5. Go to the directory that you extracted from the downloaded file and start ROMUpdateUtility_Wizard_NoID.exe (is in itallian, but there are the usual steps for upgrading ROM, so I think you'll manage).
After this, hopefully the upgrade Radio ROM process will start!
I'll repet myself, follow exactly this steps with attached file, this was my way and the only that worked for me!
P.S. Someone should delete the 2.63.90 Radio ROM file from th Prophet FTP, is dangerous and brakes your Prophet!
Click to expand...
Click to collapse
Radio 2.63.90 removed.
The Radio 2.63.90 has been removed. It is incompatible the Prophet. I'm going to continue to research these Roms. Thanx for the input.

WM5 rom for Alpine!!!(testing,and looking for test)

here i found a rom claimed WM5 Rom of Alpine come from http://www.aRAY.cn, the guy say it is being testing, and looking for anyone
who can test it together!
http://www.aray.cn/download.php?file=http://www.aray.cn/res/sprom/699-WM5.part1.rar
http://www.aray.cn/download.php?file=http://www.aray.cn/res/sprom/699-WM5.part2.rar
http://www.aray.cn/download.php?file=http://www.aray.cn/res/sprom/699-WM5.part3.rar
http://www.aray.cn/download.php?file=http://www.aray.cn/res/sprom/699-WM5.part4.rar
that is all ,and paste the links into your download tools and get it!
i use a download tool named sogou,if you cannot get the rom ,
use it
It's asking for a rar password, any idea what it might be?
eillie said:
i use a download tool named sogou,if you cannot get the rom ,
use it
Click to expand...
Click to collapse
WARNING my anti virus software detects a Trojan in the software above
I will test it out, hope that it's working ...!
rar code:aRAY.CN
to 600bhp:
the sogou tool is safety enough,and i used it for a long time,and i used kapa6.0 virus sofeware didn t report any hurt,so i think u virus software could give a wrong report.
What a ****, that's no WM5!!! This is the normal Dopod WM2003SE Update!!!
thanks
dude...dis website is AWSOME...ders so many stuff 2 download...specially da games....thanks man...
bloody typical, so its not wm5 for the alpine, and its just nafo spam. typical ;[
..be Calm...
It's April, isn't...?
ya but that only counts for the first 12 hours on the 1st this was teh 4th so dont count.
still evil
Nice joke.
Dead Alpine...Need urgent help!!!
Please I tried upgrading my alpine but while upgrading after it had done the radio rom getting to extended rom upgrade an error 113 (extended rom update error), tried 3 different rom same error message.Please could anyone help me? Device is just showing serial and someone help with detailed step how to upgrade with sd card. Thanks
I'll trust WM5 for Alpine if that was from buzz....

xda o2 orbit upgrade

can someone provide me detailed information about xda o2 orbit rom upgradation from wm5 to wm6
thanks
What do you want to know about it?
You fill the details in on the website, download the rom and run it. It will wipe all the data on your phone as well
Kimbie
I think I'm either in the same boat as Chappad or at least on the sake river; I'd like to upgrade from WM5 to WM6 as I'd also like to flash Touch Flo 3.0. I've been banging around the WM site for a while now and can't locate the file to download WM6! Where is it or am I just not seeing what may obviously there?
The other thing I am really hoping for is for someone to bless the newbies with, oh, maybe a tutorial on how to flash a ROM like WM6 onto a device like, I don't know, like a Artemis/Orbit and then to install Touch Flo 3.0 on it.
That would be sweeeet.
Seriously.
Try this site for an "official" upgrade to WM6
http://www.my-xda.com/software_updates.jsp
or you can do a search on this website for other "cooked" ROM's
Simon
WM5 to WM6 (Info from HTC)
Try this official site from HTC, this woks flawlessly for WM5 to WM6.
http://www.asia.htc.com/asia/event/WM6/in/download.html
stevewrona said:
I think I'm either in the same boat as Chappad or at least on the sake river; I'd like to upgrade from WM5 to WM6 as I'd also like to flash Touch Flo 3.0. I've been banging around the WM site for a while now and can't locate the file to download WM6! Where is it or am I just not seeing what may obviously there?
The other thing I am really hoping for is for someone to bless the newbies with, oh, maybe a tutorial on how to flash a ROM like WM6 onto a device like, I don't know, like a Artemis/Orbit and then to install Touch Flo 3.0 on it.
That would be sweeeet.
Seriously.
Click to expand...
Click to collapse
bollyfan2005 said:
Try this official site from HTC, this woks flawlessly for WM5 to WM6.
http://www.asia.htc.com/asia/event/WM6/in/download.html
Click to expand...
Click to collapse
I just tried it and you need a password to log on, have you got one to use?
Otherwise you can use the link I gave previously which is an Official upgrade for o2 Orbit which is what he first poster in this thread wanted
Simon
chappad singh said:
can someone provide me detailed information about xda o2 orbit rom upgradation from wm5 to wm6
thanks
Click to expand...
Click to collapse
OK tell ya what, pick a ROM that u want to put on your Orbit n I'll tell ya what to do. How's that sound?
This. http://forum.xda-developers.com/showthread.php?t=371182
If this works out and, with your help and guidance it's stable; I will Paypal you a "Thank you". You have my word.
Why not do a "How to..." thread on the Artemis/Orbit forums here?!
Thanks,
Steve
www.clematisimages.com
So, Meschle...or any of the other Gurus around here; How about a "How to..." setting up a Artemis/Orbit to run WM6 and Meschle's Touch Flo? I just wish I had the know-how to do it myself!
Steve
Ok ya ready for it steve.... this is gonna blow your mind! (nah only messing, its so feckin easy ya'll shoot yerself).
1 - download the .zip file of your choice.
2 - extract the .zip file to a folder somewhere
3 - connect your Orbit to your PC and make sure it Activesyncs OK
4 - open up the folder you just extracted, run "STEP 1 - activesync then uspl cid unlocking.bat" - this will unlock the SPL and CID on our Orbit so you can flash a new ROM to it.
5 - Once thats done OK and your Orbit has reset, make sure to check that your SPL is now 1.11 (do this by resetting the Orbit and on the very first screen, in top left corner in red font it will display a few things, on being SPL)
6 - now reconnect your Orbit to the PC and activesync again
7 - and this time open the extracted folder and run "STEP 2 - activesync then flash artemis touch rom.bat" - this will bring up a screen asking to make sure battery is above 50% and things like that. Just follow the prompts and update the new ROM. Your Orbit screen will probably go white with a progress bar, thats fine.
8 - Once this is showing finished Ok, you should ow have a fancy new ROM.
BEAR IN MIND THIS WILL WIPE ALL OF YOUR PHONE DATA, MUCH LIKE FORMATTING A PC HARD DISK WITH A NEW OPERATING SYSTEM. SO MAKE SURE TO BACK-UP

Is really good -> PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap

Hi there.
I have a P3301 and have been reading a lot of posts os people that has used "PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap" in Artemis with locked CID.
Can this be possible?
Another question: is really nice to change the original ROM? I get some new features like more speed (without using overclock), and other apps?
Tank you.
tuscho said:
Hi there.
I have a P3301 and have been reading a lot of posts os people that has used "PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap" in Artemis with locked CID.
Can this be possible?
Another question: is really nice to change the original ROM? I get some new features like more speed (without using overclock), and other apps?
Tank you.
Click to expand...
Click to collapse
i don't know about the first q.
and for the second ... yes it can make your device much better (if not why ppl cook and other flash ROMs )..
like more RAM free and storage
y_bother said:
i don't know about the first q.
and for the second ... yes it can make your device much better (if not why ppl cook and other flash ROMs )..
like more RAM free and storage
Click to expand...
Click to collapse
Well...
I have a P3301... i´ve just buyed it. Wich ROM is more new and recommended for this device?
I was worried about the ROM wich i asked in first post, because the related posts about that, all were posted in 2007...
We are in final of 2008.... and i have a new device... So i wanted a more recent and complete ROM....
Tanks by the help....
well in my opinion and for WWE ROM try the following:
if you want a rom with manila i highly recomend FlyROM (the one in my segniture)
if you want a clean and best performance try the YuE v11.3 ExtraClean.
and there are other ROMs what i did not tried even they look good like gulloms and T.I.R
hope i was helpful
and remeber to CID UNLOCK your device first
CHEERS
Tanks a lot.
My first atempt wiil be the YuE v11.3 ExtraClean, because i wanna focus in performance. I am in middle of a .NET mobile development, and want to have a faster Smartphone to test my apps.
Tanks by reply... Other thing: CID locked devices really must bu unlocked first right? I tried unlocking by downloading a app that i get in this forum, but he doesn´t works in Windows Vista: doesn´t recognize my device during procedures... Windows Vista uses "Sync Center" and not "Active Sync"... does anyone had this problem using Vista?
Regards,
Tuschinski.
yes if you want to flash any ROM except your device original ROM you have to CID UNLOCK first...
and sorry i don't know how to do it in vista
maybe someone knows
In FlyROM, for example: does it updates just OS, or another features like radio, etc...?
no it doesn't the spl will remain .11 and the radio as it was before flashing
Can you explain to me waht the SPL initals mean?
IPL - Initial Program Loader, a bit like BIOS on a desktop.
SPL - Secondary Program Loader, the bootloader, which starts the OS.
and for the number as you know it's like a version and when it .111 it's unlocked as i know
sorry that is all i can tell cuz i'm not knowing alot about these
Tanks a lot...
tuscho said:
Tanks a lot.
My first atempt wiil be the YuE v11.3 ExtraClean, because i wanna focus in performance. I am in middle of a .NET mobile development, and want to have a faster Smartphone to test my apps.
Tanks by reply... Other thing: CID locked devices really must bu unlocked first right? I tried unlocking by downloading a app that i get in this forum, but he doesn´t works in Windows Vista: doesn´t recognize my device during procedures... Windows Vista uses "Sync Center" and not "Active Sync"... does anyone had this problem using Vista?
Regards,
Tuschinski.
Click to expand...
Click to collapse
Hey tuscho!
Were you able to flash the new rom in your p3301 with success?

Categories

Resources