I have been reading rumors about this Radio Rom. If it does exist, what rom is it from. If some one can tell me i'll extract and test it.
look in artemis forum, they got the 2.67.9 radio rom in the latest artemis rom. we shoul b able to use it no problem. im willing to try it out 1st if anyone able to extract it.
Radio ROM 02.67.90
rdboyce said:
I have been reading rumors about this Radio Rom. If it does exist, what rom is it from. If some one can tell me i'll extract and test it.
Click to expand...
Click to collapse
Well since I could not find it, I decided to cook it myself. Thanx to Pof and risidoro for your help and scripts. Good looking out Pof.
ftp://xda:[email protected]/RadioRom/Prophet_G4_RadioRom_v2.67.9.exe
Disclaimer: THIS IS A COOKED ROM AND THUS IT MAY CAUSE SEVERE DATA LOSS OR EVEN IRREMEDIABLY DAMAGE YOUR DEVICE!
THE AUTHOR, NOR EVERY OTHER PERSON INVOLVED (E.G. THE ROM TOOLS DEVELOPERS), SHALL NOT BE HELD RESPONSIBLE FOR ANY MALFUNCTIONS OR DAMAGES THIS PROCEDURE MAY CAUSE.
so did someone try it? i heard new versions were very bad for the battery life, hope this one is better.
i did.. but im using wizard. somehow not compatible. should be able to use. i dunno if rdboyce pulled it out from the artemis or not but it dun work. it didnt crashed the phone thou so no harm in trying. you can flash it back to 2.26 or 2.47 if dun work
rdboyce said:
Well since I could not find it, I decided to cook it myself. Thanx to Pof and risidoro for your help and scripts. Good looking out Pof.
ftp://xda:[email protected]/RadioRom/Prophet_G4_RadioRom_v2.67.9.exe
Disclaimer: THIS IS A COOKED ROM AND THUS IT MAY CAUSE SEVERE DATA LOSS OR EVEN IRREMEDIABLY DAMAGE YOUR DEVICE!
THE AUTHOR, NOR EVERY OTHER PERSON INVOLVED (E.G. THE ROM TOOLS DEVELOPERS), SHALL NOT BE HELD RESPONSIBLE FOR ANY MALFUNCTIONS OR DAMAGES THIS PROCEDURE MAY CAUSE.
Click to expand...
Click to collapse
Is there a G3 version?
Cutefox said:
i did.. but im using wizard. somehow not compatible. should be able to use. i dunno if rdboyce pulled it out from the artemis or not but it dun work. it didnt crashed the phone thou so no harm in trying. you can flash it back to 2.26 or 2.47 if dun work
Click to expand...
Click to collapse
I did pull it from the Artemis and I'm redoing it now. You're right it don't work but it doesn't brick. I looked at the size and the Hex Dump of both and they are similar. The Artemis ROM even had the G3 and G4 IPL and SPL when I decoded the ROM. I had so much hope but no go.
I was considering the Excalibur ROM as well but its bigger than the Prophet/Wizard radio ROMs. I'm more apt Prophet/Wizard Radios are usually around 2.5MB. The Excalibur ROM is 2.8MB. Not sure the the dedicated Radio space on the Prophet but the difference is just enough to brick.
I've already decoded it. If some one wants to try the Excalibur I'll post it.
i dun mind trying excalibur as well.. but redo the artemis 1st. i'll try again once u finish.. if u look at the post in artemis forum it says 2.67 got good battery life.. dat i want!! lol..
Confirming the radio rom does not work as well on my S200
I've created a G3 version for my S200 but it's not working, doesn't find the provider any longer, I'll play around some more, but a no go so far.
Jesterz said:
I've created a G3 version for my S200 but it's not working, doesn't find the provider any longer, I'll play around some more, but a no go so far.
Click to expand...
Click to collapse
I'm the same place after re-extracting it from the Artemis ROM. I'm going to wrap the Excalibur ROM. It'll be posted soon. Anyone wanting to try it, Have fun.
i've changed the header info a bit, but that doesnt seem to help either
Let's try the next ROM
Cutefox said:
i dun mind trying excalibur as well.. but redo the artemis 1st. i'll try again once u finish.. if u look at the post in artemis forum it says 2.67 got good battery life.. dat i want!! lol..
Click to expand...
Click to collapse
OK everyone, this one is built from the Excalibur ROM. For all the brave souls:
ftp://xda:[email protected]/Prophet_G4_RadioRom_v2.63.9 0_Test.exe
I do see that the other ROM was removed so...
If you post a G3 radio rom, I can try it on my Qtek S200...
rdboyce said:
OK everyone, this one is built from the Excalibur ROM. For all the brave souls:
ftp://xda:[email protected]/Prophet_G4_RadioRom_v2.63.9 0_Test.exe
Click to expand...
Click to collapse
Did anyone try the Excalibur build?
rdboyce said:
Did anyone try the Excalibur build?
Click to expand...
Click to collapse
I'll do a test soon, I'm playing with the new AKU 3.2 ROM and made a clean version.
Radio rom upgrade problem!
I upgraded my s200 RadioROM to 2.63.90. Now my Phone lost Radio Rom and lost the GSM signal. The phone become very slow and con't activesync to the pc. I have try but can't upgrade any other rom now! Can someone help me?
I had the same problem! After radio update, Prophet does not connect to the PC anymore. I,ve managed the problem with the following steps, take them exactly:
1. Download the linked file and extract it in a known place: ftp://xda:[email protected]/Uploads/Wizard/2_47_11_radio.rar
2. Disconnect Prophet from the USB cable;
3. Enter in the boot loader mode (press power button + camera button in the same time and hit reset);
4. Connect the cable and in the left down corner the USB name will apear;
5. Go to the directory that you extracted from the downloaded file and start ROMUpdateUtility_Wizard_NoID.exe (is in itallian, but there are the usual steps for upgrading ROM, so I think you'll manage).
After this, hopefully the upgrade Radio ROM process will start!
I'll repet myself, follow exactly this steps with attached file, this was my way and the only that worked for me!
P.S. Someone should delete the 2.63.90 Radio ROM file from th Prophet FTP, is dangerous and brakes your Prophet!
Thanks very much! My Phone has come back!
GOGULETE said:
I had the same problem! After radio update, Prophet does not connect to the PC anymore. I,ve managed the problem with the following steps, take them exactly:
1. Download the linked file and extract it in a known place: ftp://xda:[email protected]/Uploads/Wizard/2_47_11_radio.rar
2. Disconnect Prophet from the USB cable;
3. Enter in the boot loader mode (press power button + camera button in the same time and hit reset);
4. Connect the cable and in the left down corner the USB name will apear;
5. Go to the directory that you extracted from the downloaded file and start ROMUpdateUtility_Wizard_NoID.exe (is in itallian, but there are the usual steps for upgrading ROM, so I think you'll manage).
After this, hopefully the upgrade Radio ROM process will start!
I'll repet myself, follow exactly this steps with attached file, this was my way and the only that worked for me!
P.S. Someone should delete the 2.63.90 Radio ROM file from th Prophet FTP, is dangerous and brakes your Prophet!
Click to expand...
Click to collapse
Radio 2.63.90 removed.
The Radio 2.63.90 has been removed. It is incompatible the Prophet. I'm going to continue to research these Roms. Thanx for the input.
Related
I have problem with BT cannot switch on. I have try many Radio, many Rom but problem still remainning. Goodbye.
vuvan said:
I have problem with BT cannot switch on. I have try many Radio, many Rom but problem still remainning. Goodbye.
Click to expand...
Click to collapse
Hi,
I do not have such problems.
Maybe you would like to share what roms u using?
Some suggestions, you might want to flash back to the original rom to see if such problem persist.
I'm currently using UDK R7 with murata 1.58.25.14.
Hope that helps
Waht is your serialnr. of the device.
Because on a dutch forum we collect al the serialnr. to look at the most common problems with the serialnr. as a reverence.
Maybe with this information i can look a this forum for u so you can contact HTC.
there is a fix on the HTC site
there is a patch for the HTC polaris on the HTC site. Did you apply that?
Ajacied410 said:
Waht is your serialnr. of the device.
Because on a dutch forum we collect al the serialnr. to look at the most common problems with the serialnr. as a reverence.
Maybe with this information i can look a this forum for u so you can contact HTC.
Click to expand...
Click to collapse
Thx, but tell me where i can find serialnr, do i need to open the cover?
runningroach said:
there is a patch for the HTC polaris on the HTC site. Did you apply that?
Click to expand...
Click to collapse
This patch can not solve BT problem. The BT can't switch on to apply a patch (patch for mute and steady)
Decentboi said:
Hi,
I do not have such problems.
Maybe you would like to share what roms u using?
Some suggestions, you might want to flash back to the original rom to see if such problem persist.
I'm currently using UDK R7 with murata 1.58.25.14.
Hope that helps
Click to expand...
Click to collapse
Thank man,
I use Murata 1.58.21.23 and UDK R7
Note that: i have try many Radio, many Rom but same problem, even come back to original Rom.
Is it your hardware problem? Seems no ppl encounter the problem. I use it very happy. No hanging at all.
Do you try radio rom 1.64.08.21? the lastest one because no problem with this raido rom for me and other in this forum.
imfloflo said:
Do you try radio rom 1.64.08.21? the lastest one because no problem with this raido rom for me and other in this forum.
Click to expand...
Click to collapse
Yes, i have try 1.64.08.21.
This is not a hardware error because some time my BT was switch on, (on that time i dont know why it live)
Dunno! Too bad maybe hardware bug sometimes false connection or bluetooth processor partial out of service.
What is the differences between 1.58.25.14 and 1.64.08.21 version.I don't understand why some rom are 1.58.xxxx and other are 1.64.xxxx
are you using the comm manager or just turning it on from the bluetooth section of connections
Same Problem Here
Today my Polaris Began to do exactly the same, Bluetooth will not turn on no matter what. I did hard reset, applied the BT patches on HTC support page after the hard reset and my Bluetooth worked for some hours but when I walked in the car it could not connect to the BT Hands free and afterwards it restarted itself and no more BT. Did hard reset again applied the patches but now nothing seems to work. I have the original German 1.25.407.1 GER ROM and it had been working great for the past six months but not anymore today... any suggestions on how to fix this issue??
1.64 Radio ROMs are from Kaiser.
imfloflo said:
Dunno! Too bad maybe hardware bug sometimes false connection or bluetooth processor partial out of service.
What is the differences between 1.58.25.14 and 1.64.08.21 version.I don't understand why some rom are 1.58.xxxx and other are 1.64.xxxx
Click to expand...
Click to collapse
Bluetooth is weird, i never managed to setup activesync with my cruise with BT,
only USB
all other stuff works.
Good day all.
I have the same problems with my HTC TC. It is only 4 months old and it all started with the BT problem failing intermittently... now permanent. Then my mic volume is too soft to make proper conversation... and now my USB doesn't work.
My TC information as follows:
ROM: 1.26.457.1 WWE
Radio: 1.58.21.23
I like to flash the ROM with the latest from HTC but no USB connection... to PC.
Can someone advise how I can proceed?? I'm hoping this upgrade can fix all my problems.
o2user123 said:
Good day all.
I have the same problems with my HTC TC. It is only 4 months old and it all started with the BT problem failing intermittently... now permanent. Then my mic volume is too soft to make proper conversation... and now my USB doesn't work.
My TC information as follows:
ROM: 1.26.457.1 WWE
Radio: 1.58.21.23
I like to flash the ROM with the latest from HTC but no USB connection... to PC.
Can someone advise how I can proceed?? I'm hoping this upgrade can fix all my problems.
Click to expand...
Click to collapse
You can put your phone into bootloader mode by pressing camera + reset button, connect your phone into PC by USB cable, then flash a rom you want.
In my 3 month experience using Polaris, no any rom or radio at this moment can fix BT problem. Only one method will fix it: goodbye Polaris, buy another phone
So I like to try and recover the TC by trying everything b4 giving up totally. My PC-to-USB connection on the TC does not work and would like to see if I can load the new ROM on HTC site thru' other means via the microSD.
Anybody know how I can achieve this???
HELP!!!
o2user123 said:
So I like to try and recover the TC by trying everything b4 giving up totally. My PC-to-USB connection on the TC does not work and would like to see if I can load the new ROM on HTC site thru' other means via the microSD.
Anybody know how I can achieve this???
HELP!!!
Click to expand...
Click to collapse
rename the RUU_signed.nbh to POLAIMG.NBH copy to the root of your sd card then while pressing your camera button take youir stylist and stick it in the reset hole at the bottom of your phone to the left of your usb.
Good day bkeaver
Thanks for your response. Where can I get the RUU_signed.nbh file??
In the HTC site, I have downloaded an .exe file and the instructions require me to connect the TC to the PC using activesync thru' the USB port...
... very grateful if you can point me to the website??
I'm out of my depth and an need of some help to get my X7500 back into working order !
I upgraded my machine to AP4, carefully following the nicely documented instructions, and it worked a treat. The new interface looked great. However, for some reason my GPS application (i-GO Europe) wouldn't work at all. After searching the threads and not finding anything there, I thought it would be best to return to my old ROM version - the official HTC Advantage WM6 Upgrade. Naively I thought that this would be just as simple as running the Advantage_HTC_WWE_2.21.405.2_1.50.00.00_Ship executable - but I was wrong ! The update failed, and now I am left with a PPC with a pretty three colour screen...
ATHE100
IPL-v1.00
ATHE100 MFG
SPL-v3.50. OliNex
Is there any way that I can recover my device from this state ?
You have spl3.5
very easy to solve
just plug your athena to the PC and install a rom for SPL3.5 , there are several good ones, since AP4 didn't work for you and I cannot remember if AP4 can be installer from boot loader, the easy thing should be install the latest Michiprima rom (SPL3.5 not 1.20)
if you wish to install a original rom in the future remember to use spl downgrader to go back to SPL1.20
As always take memory cards from the device before playing and please read
Craigus said:
I'm out of my depth and an need of some help to get my X7500 back into working order !
I upgraded my machine to AP4, carefully following the nicely documented instructions, and it worked a treat. The new interface looked great. However, for some reason my GPS application (i-GO Europe) wouldn't work at all. After searching the threads and not finding anything there, I thought it would be best to return to my old ROM version - the official HTC Advantage WM6 Upgrade. Naively I thought that this would be just as simple as running the Advantage_HTC_WWE_2.21.405.2_1.50.00.00_Ship executable - but I was wrong ! The update failed, and now I am left with a PPC with a pretty three colour screen...
ATHE100
IPL-v1.00
ATHE100 MFG
SPL-v3.50. OliNex
Is there any way that I can recover my device from this state ?
Click to expand...
Click to collapse
Just reflash with a MICHY rom,any will do, but if you want to go back to SPL 1.2 then use THIS
However try Michy's latest r6.0 it is very good
Jay
PBL1 said:
You have spl3.5
very easy to solve
just plug your athena to the PC and install a rom for SPL3.5 , there are several good ones, since AP4 didn't work for you and I cannot remember if AP4 can be installer from boot loader, the easy thing should be install the latest Michiprima rom (SPL3.5 not 1.20)
Click to expand...
Click to collapse
Thanks very much for your advice !
I thought I had to have an ActiveSync connection to load a new ROM onto my device. But you were right - very easy to solve.
responderman said:
Just reflash with a MICHY rom,any will do, but if you want to go back to SPL 1.2 then use THIS
However try Michy's latest r6.0 it is very good
Jay
Click to expand...
Click to collapse
Tried the Michy R6.0 and it does look good. Still having problems with my GPS application though, so might have to go back to the original. Will play around with this one in the meantime.
Thanks for taking the time to make your suggestion.
Craigus said:
Tried the Michy R6.0 and it does look good. Still having problems with my GPS application though, so might have to go back to the original. Will play around with this one in the meantime.
Thanks for taking the time to make your suggestion.
Click to expand...
Click to collapse
In regard to the GPS have you upgraded your radio version above 1.5
Radio 1.57
or
Radio 1.58
lakeman said:
In regard to the GPS have you upgraded your radio version above 1.5
Radio 1.57
or
Radio 1.58
Click to expand...
Click to collapse
Very good point that may make all the difference
Jay
lakeman said:
In regard to the GPS have you upgraded your radio version above 1.5
Radio 1.57
or
Radio 1.58
Click to expand...
Click to collapse
Unfortunately not !
I ended up loading AP3, and my GPS application worked on that. Now I've gone back to the official WM6 ROM. When I have some time, I might reload the AP4 ROM and try the new versions of the radio - but I need a stable device at the moment.
Thanks again
i just remembered
i just remembered you have to disable htc home in AP4 for igo to work
Just load michys large htc home cab instead
god, got to love the community spirit
Up and Running
lakeman said:
i just remembered you have to disable htc home in AP4 for igo to work
Just load michys large htc home cab instead
Click to expand...
Click to collapse
> ROM Version: AP 4.0 Platinum
> ROM Date: 11/09/07
> Radio Version: 1.58.00.00
> Protocol Version: 32.91.70.20.20H
Just an update for those interested. I'm now running AP4 with i-GO happily running away. Not sure I needed to update the Radio version, but you were right - I had to turn off the HTC HOME in Today.
Thanks for the help from those more experienced. It was greatfully received and, although I haven't had time to really use the upgraded device in anger yet, I am currently very happy with it.
Just one last thing. Have you got a link for the said 'michys large htc home cab', as that would be the icing on the cake to have that lovely Home available.
Thanks very much !
Craigus
hi i was trying to flash my friends htc 8125 with the tutorial on this web and now i just have 3 color display or boot mode i think. im new this was my first time i flashet first with buton ... flash but not work error 302 but after i flash with alternative flash was in the tutorial and i get an error to so i dont know what to do how to repair
HTC CINGULAR 8125
IPL 1.05
SPL 1.05
I'm kinda of new too, but I believe you just have to pick the rom u want to flash up to. U r at the ideal ipl & spl. I just did that to mine about a week ago and then flashed it EXACTLY like forum said and then just update to 3.XXIPL & 3.XXSPl. After which I picked 1 of the TNT rOMs and wella! try to flash it up now
i dont know wheres to find the roms do you have a link or something
Have you CID unlocked yet?
Obviously not unlocked yet!
Cause he stucks on step 1 !
hahahaha upgrade an original rom... try the 2.26 tmobile not 3.08 please...
Hey Que
I will be getting T-Mobile any hour today...
I will be following all the instructions and try to use a Cingular card on it.
I'm trying to decide what to use for updating the rom on this 8125 the ipl reads 2.25 the spl reads 2.25. in the tutorial there isnt any mention of these that I can ascertain. the other numbers are os 2.25.11.1 gsm 02.25.11
Is this even a necessity. The unit shuts down and is very difficult to get restarted, seems to be a good unit, just looking to make it more reliable. Thanks in advance for the help.
hydafl said:
I'm trying to decide what to use for updating the rom on this 8125 the ipl reads 2.25 the spl reads 2.25. in the tutorial there isnt any mention of these that I can ascertain. the other numbers are os 2.25.11.1 gsm 02.25.11
Is this even a necessity. The unit shuts down and is very difficult to get restarted, seems to be a good unit, just looking to make it more reliable. Thanks in advance for the help.
Click to expand...
Click to collapse
Your phone is running the official cingular stock rom and has official IPL/SPL 2.25 (Bootloaders),its nothing to be worried about,now it depends if you prefer to reflash the official wm5 rom or wud like to upgrade to latest wm6.1 custom build roms.
If you want to keep official then download the official wm5 stock rom and simply flash it,but if you desire to upgrade to latest wm6.1 rom,as no official wm6 roms are provided,therefore,you'll have to flash a custom build wm6.1 rom,and for that you'll have to get your phone CID unlocked.
my phone is in boot mode i dont have the roms im new wheres can i find the rom that you say the tmobile my phone was with the original cingular rom or where can i find the original one
mmmmm ok!
I dont have the link but you an enter in wiki section for wizard... is a thread that said wizard goes wiki click there and then it tooks you to the wiki pages! there... you can found a link that takes you to the original roms... choose the one you see for cingular..... some links are broken so dont desperate maybe we can found other one... if you dont get it there you can choose the search tool just follow my steps on my signature says The XDA search culture...
Dont be afraid men you only need to use some more things to start unbricking your phone... (I hope so) many things tooks time cause we dont read enough now lets work men!!!
Well avoiding duplicatted posts this is gonna change many times
Here is my RUU without ID http://forum.xda-developers.com/showthread.php?t=429327&page=9
I didnt found the cingular but try to unzip the exe file with winrar... the nk.nbf can be cutted and pasted in the RUU folder to upgrade it without ID vendor permissions... we will on touch men!
Xplain more
Xplain more of your problem remember that unlock upgrade flashing dids most be done on XP and without SIM and MiniSD pluged... be sure your batt is full charged and your USB cable dont have troubles.
Can you privide more info abour exactly what you have done... please men we need all you got
OH remember not to use so much your phone on Bootloader screen cause we need the batt almost 70% to downgrade unlock and upgrade again it dont charge in RGB screen.
About getting official Wizard Cingular ROMs.
I called HTC and Cingular they say that HTC is not licensing the Wizard WM6 from Microsoft anymore, so they are not supplying the ROMs for the public.
No official support from Cingular/HTC on Wizard for WM6 or 5 for that matter.
I'm new to pdas I've only ever had cell phones so with that in mind its confusing as to where to start. I'm electronic savvy when it comes to car repair, however some of this is daunting at best. I'd like to take this semi-bricked wizard to the next level.
Everytime I find what I'm looking for the webpage is obsolete, what to do?
hydafl said:
I'm new to pdas I've only ever had cell phones so with that in mind its confusing as to where to start. I'm electronic savvy when it comes to car repair, however some of this is daunting at best. I'd like to take this semi-bricked wizard to the next level.
Everytime I find what I'm looking for the webpage is obsolete, what to do?
Click to expand...
Click to collapse
First,always post the DOC Chip version of the phone,what is the IPL/SPL of the phone.
Secondly,what exactly is the problem and what you want to do ?
the ipl/spl are at 2.25 and the specific problem is that wen in hibernate mode the only way to work with it is to remove the battery to restore functionality, then that resets the factory settings of time and date and also drops calls etc.
hydafl said:
the ipl/spl are at 2.25 and the specific problem is that wen in hibernate mode the only way to work with it is to remove the battery to restore functionality, then that resets the factory settings of time and date and also drops calls etc.
Click to expand...
Click to collapse
Its a G3 version,download the official stock wm5 rom from here and flash it:-
http://download.america.htc.com/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe
But,if you want to upgrade to latest wm6 then follow this link and do it correctly as the guide reads :-
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Good luck
Well I think its bricked no screen and no charge light, should I buy a new battery or just sell it for parts? I really tried to find the correct place to update and I goofed what can I say its my responsibility, is thereanymore I can do from this point?
hydafl said:
Well I think its bricked no screen and no charge light, should I buy a new battery or just sell it for parts? I really tried to find the correct place to update and I goofed what can I say its my responsibility, is thereanymore I can do from this point?
Click to expand...
Click to collapse
G3 devices don't get Bricked like this,by just flashing a rom,untill and unless you have flashed any G4 IPL/SPL on it,otherwise,G3 phones never get Bricked.So most probably its the battery,try to get the battery charged or get another battery from a friend and confirm it.
As an update and thank you very much. I purchased a new battery and the the store was good enough to pre charge it. We installed the above official wm5 file and its currently going throuh re updating itself. I did happen to notice that it now has an AKU2 file. Is this an update over and above what I had originally?
Once again thanks....
Are there any problems with 3G sim cards because when I installed the card the phone reacts as if there is no battery. No charge indicator or any activity.
Problem solved, it helps to have the sim card properly seated.......
Thanz!
You are most welcome,glade its working.
Yes,the above rom is AKU 2,its an upgrade to your previous official Rom,always try to keep the battery fully charged,as it creates many problems if it gets below the required retention charge of 30%.
Try out the Guide I posted above and see if you can get it CID unlocked and upgraded to latest wm6.1 rom,thats where the fun begins....!
Hello mates,
I updated my i-mate Jasjar to WM6.1 ROM by Ranju and a few others. The update is successful and everything works fine but my cellular connection just doesn't work. My sim card (smartchip) is not detected. Ranju's ROM doesn't let me open the communication manager. Another ROM stays forever on flight mode and I can't even change it.
I live in India just for the record if the Smartchips in India might make a difference. I'm totally clueless on what to do.
Couldn't find any post relevant to this.
Please help.
Thanks and regards,
Aditya More.
my bet would be a radio rom incompatibility, but im not sure.
what radio are you using? it seems that higher wm6 builds require certain radios or something.
no clue what a radio is..
Radio rom. It's part of uni software that is responsible for gsm module (and everything related). You can flash your radio rom the same way you flash any rom. Just use flashing software (ROMUpgradeUT). Though you will need radio_.nbf instead of nk.nbf when flashing radio.
Thanks a ton for that information. I'm pretty new with this.
So well, which radio should I use for my i-mate jasjar? Where can I download it?
Is there like a setup file for radio flashing? Using ROMUpgradeUT would be a little difficult for me. Do I have to flash this file in bootloader mode?
Thanks,
Aditya More.
Download radio here: ftp://ftp.xda-developers.com/Uploads/Universal/Radio/
Personally I would recommend 1.18.00. I'm using this one currently, and is working just fine. Though, you can just experiment a little with different radio roms, and find which one is working best with your device.
Actually ROMUpgradeUT IS something like a setup to flash your device, and there is no easier way to flash device. Only thing you need is to place ROMUpgradeUT somewhere along with radio_.nbf and run ROMUpgradeUT.
Anyway just read this: http://wiki.xda-developers.com/index.php?pagename=Uni_ROM_Upgrade ,and there should not be any problems for you (at least with flashing).
Also, make sure to spend some time reading universal wiki, if you are new for Windows Mobile and uni.
It's working guys.
@cheapusenet: if it weren't for you, I'd have been still stuck with the bootloader screen. Thanks a ton. I really really appreciate your help man. Really. Thanks for the radio info too.
@Kalgon5: The radio info was very useful. wiki Universal is my homepage. I go through it every single day. But just didn't any clue about radio and flashing. Pretty new. Anyway, thanks a lot. Really appreciate your help.
@Luca: the ROM rules. Very fast, awesome applications, good battery life. Thanks.
I used to use cooked rom, tried 6.1, 6.5 and 6.5.x.
Failed to search for phone signal today, confirmed not SIM card problem.
Will cooked rom damage hardware? Thanks!
I don't think so , Hard-reset your phone with your Sim-card inside it and it will work again
If the problem still persist, try to install radio from this link :
http://forum.xda-developers.com/showthread.php?t=440503
If that does not solve the problem, I think the only way is to install a shipped ROM that suits with your phone's specification (ELF or ELFIN, Model ID and etc).
But don't forget to return your SPL and IPL to origina ones when you will load a shipped ROM. You can find them on XDA Wiki.
Hope your Elf (Elfin?) will be Ok!
How can I know my original IPL? SPL?
if you didn't run the dsixda script before hand that grabs all your information, and have sinced changed your IPL/SPL then I'm not sure.
However, If you know your phone model number (T-MOB0005 etc.) You may be able to guesstimate to what they were based on that - Personally, I think that could be a bit risky, but it was worth the suggestion.
Do you remember if you have changed the IPL and SPL? You could always run the dsixda script now to see what you have. It should be in the ROM section
Sorry I can't be more help, but I can only make a suggestion as to how, as I have always took a note of them before starting anything.
At the same time - I also have an elf that is unable to connect to a network, I have tried radio upgrades etc and custom roms, so if you do fix it, I know that I would appreciate the outcome, as would many others who have posted the same issue - In the mean time I am continuing my hunt for a fix for it
Stu
captainstu72 said:
if you didn't run the dsixda script before hand that grabs all your information, and have sinced changed your IPL/SPL then I'm not sure.
However, If you know your phone model number (T-MOB0005 etc.) You may be able to guesstimate to what they were based on that - Personally, I think that could be a bit risky, but it was worth the suggestion.
Do you remember if you have changed the IPL and SPL? You could always run the dsixda script now to see what you have. It should be in the ROM section
Sorry I can't be more help, but I can only make a suggestion as to how, as I have always took a note of them before starting anything.
At the same time - I also have an elf that is unable to connect to a network, I have tried radio upgrades etc and custom roms, so if you do fix it, I know that I would appreciate the outcome, as would many others who have posted the same issue - In the mean time I am continuing my hunt for a fix for it
Stu
Click to expand...
Click to collapse
Is that means that I can only use cooked rom from now on if I don't know the original SPL IPL?
rexlun said:
Is that means that I can only use cooked rom from now on if I don't know the original SPL IPL?
Click to expand...
Click to collapse
If you haven't changed them, then you could well still be able to use your shipped rom.
but if you don't know what they were, and have changed them, then yes, custom roms is the only way for you, from what I understand.
captainstu72 said:
If you haven't changed them, then you could well still be able to use your shipped rom.
but if you don't know what they were, and have changed them, then yes, custom roms is the only way for you, from what I understand.
Click to expand...
Click to collapse
Thank you for your kindly help! Is so nice to be here!
I'll keep trying and report here if I've my 'touch' recover!
Really Thanks!
No probs, it's what this site is for