Hey guys,upper part of My Defy Plus is not responding to touch from around 3 months, till now i was managing it somehow by changing the screen directions. But as my warranty period is coming to an end i want to give it to repair. But they(Motorola care) will take around 1 month to return it back . So is there any method where i can repair it by myself. What could be the problem????
I am from Bangalore, India. Help me out guys ..... Please.... :
)
I have attached the image of my defy and marked the part not responding to touch by black colour. Display is working good .
Related
after uprom my hermes become hot and the touchscreen can't use. after that it alway auto click in top right coner, then the touch screen can't use. i put out the bat after 5 minute and put in every thing OK , about 3 minute later it continues the problem.
how can i repair it? new touch screen?? thanks
It's a problem with the motherboard, not the screen. Been there; time for service.
thanks. now i'm not in my country i don't know where to repair it
buy a cheap fone and when i come backto VietNam i will repair it.
Now i'm living in taiwan and don't know chinese bc i leaning in english
If any body have a picture of main board pls send me .
No body know?
I bought Acer Iconia A500 32giga today 29/12/2011.
After pushing the button for locking the screen becomes black (it's ok till here) but then black lines appears on the screen and you can see them if you turn about 45degrees the screen.
Any ideas??
Is it ok?
Software or hardware problem??
What to do??
THNX a lotttttt
Could be either.. but i would do the fallowing .. if it does not work Take it back
go to settings FROM THE APP Drawer.. /
go to the privacy tab... At the bottom click factory Data reset..
because its BRAND NEW it should work without any effort on your part.. its a expensive device . take it back..
Good Luck
i see a plan on the glass screen when the light is up the screen. The plan consists lines and small cycles.
Excluding this problem it works perfect.
Has enyone the same " picture" on his/her tab????
That is the Digitizer grid .. if you look very close at it in the light you will see its a grid of triangles.. only seen with the light just right .
this covers the entire screen..
i can see them when i turn acer about 45 degrees face to light.
Anyway i 'll hold it. it has 2 years waranty so...
Thank you very much.
Tomorrow i'll see if gps works i didn't check it today.
thank you very much again.
My Defy's search pads light had stopped working due to which i gave it to the service center on the 6th of September and today it is the 26 th and still no signs of it ,i regularly call them but they say its an motherboard problem and they cant find the parts so it will take an other 2-3 days , i dont kn how an non functional touchpad light has caused the entire motherboard to be replaced they had to simply replace it or just jump the cable from an other line ,has any one experienced such service from Motorola here in Mumbai ?:crying:
Hello guys !!
My Nexus 4 started acting weird all of a sudden . I don't remember dropping it down . I tried searching for troubleshooting videos but i didnt figure any having the exact problem as mine. The problem is display - digitizer based , but wanted some help from the seniors .
1) Bottom half of the screen does not respond to touch . This way i am not able to unlock the pattern. Initially it was just the soft keys which wouldnt work . So i disabled the soft keys and installed a LMT launcher , since the bottom dead space didn't really hurt touch usage. Now the dead area has spread upwards .Now this makes me wonder , the screen hasn't broken . The dead area is spreading like a disease.
Attached an amateur clip for ur assistance.
watch?v=GE6cr1qjSPA
2) Lot of ghost touches if u can call it that. the screen keeps scrolling and touches and random spots automatically .
Clip attached watch?v=SGXFwzFNfuk
what do u guys think the problem is .
sadik sheik said:
Hello guys !!
My Nexus 4 started acting weird all of a sudden . I don't remember dropping it down . I tried searching for troubleshooting videos but i didnt figure any having the exact problem as mine. The problem is display - digitizer based , but wanted some help from the seniors .
1) Bottom half of the screen does not respond to touch . This way i am not able to unlock the pattern. Initially it was just the soft keys which wouldnt work . So i disabled the soft keys and installed a LMT launcher , since the bottom dead space didn't really hurt touch usage. Now the dead area has spread upwards .Now this makes me wonder , the screen hasn't broken . The dead area is spreading like a disease.
Attached an amateur clip for ur assistance.
watch?v=GE6cr1qjSPA
2) Lot of ghost touches if u can call it that. the screen keeps scrolling and touches and random spots automatically .
Clip attached watch?v=SGXFwzFNfuk
what do u guys think the problem is .
Click to expand...
Click to collapse
Seems like a hardware problem. I suggest you RMA it if you can.
some doubts for rma
I live in India . The phone is bought from USA !
Will i need the bill before i send it ?
The bootloader is unlocked !! will it be a problem ! It has to be in warranty right .
sadik sheik said:
some doubts for rma
I live in India . The phone is bought from USA !
Will i need the bill before i send it ?
The bootloader is unlocked !! will it be a problem ! It has to be in warranty right .
Click to expand...
Click to collapse
unroot, flash back stock rom and relock the bootloader.
If you paid cash. Not getting RMA without warranty papers and or depends on your protection plan if you even have one. Its safer to send back unrooted. But I do believe your mapping and touch sensors are fried via digitizer.
Sent from my Nexus 4 using xda premium
Hi Xperts,
Have Samsung A8 whose screen was replaced 6 months back. However, the screen was not fit properly (not at level with the metallic case) and I had complained to Samsung Service Centre guys multiple times. Finally fed up of visits, I used the phone for last 3 months as it was. Recently, it has developed a unique issue.
If the screen ( from top right corner) is firmly pushed in the case, it gives black screen or flickering screen with Horizontal colored lines. However, if the screen is not firmly set in the case, it works fine. Service centre guys told me that the screen needs to be replaced by paying Rs 8500 again. Thats ridiculous since they are not accepting that they did a shabby job fixing the screen earlier. Moreover, the screen works fine as long as it is not pushed in the case too hard. Can u suggest what could be the probable issue? Trying to see if I can get this repaired outside SAmsung service centre in Delhi. Any suggestions are welcome.
Thanks,
Sameer