Hello guys,
I was trying to install new rom for my hd2 and now i can't enter green, red ,blue screen and i wont boot to magdlr can anyone help?
Wandalas said:
Hello guys,
I was trying to install new rom for my hd2 and now i can't enter green, red ,blue screen and i wont boot to magdlr can anyone help?
Click to expand...
Click to collapse
hi, you can repaire bootload for your phone, I think, it's die bootload. good luck!
Related
hi, i have a htc magic/sapphire phone, after downloading and updating from sd card (update.zip) my phone cant turn on when i'm press the power on key. and i cant recognize it on my compuiter via usb, so my computer is't connet to my htc magic from usb.
all of i can know about short keys (home+end, back+end) not responding correctly
when i'm press trackball+end a have a BLUE LED(not green) on top of my phone
what can i do
please. tell me what can do for turning on my phone, thanks
i have a similar problem!!!! help me!!
Same problem me too... I tried splhard1_update_signed.zip
But when I restart... nothing!!! The magic doesn't start up... I have only a bad uggly black screen...
Tried : HOME+POWER, HOME+POWER+BACK; POWER+VOLDOWN
But nothing... ideas??
Hey anyone can help me?
Maybe unmodified Magic cannot run updates? Have a look at the "Sapphire android development" forum for the "daldroid" custom rom or others
Just a follow-up to my above post:
My reasoning comes from this post:
http://forum.xda-developers.com/showpost.php?p=3948652&postcount=220
From reading the procedure of successfully flashing another ROM, it looks like you need a recovery image first.
Hi to all ,
I have the msn account:[email protected] .Once again,just to make the resume of the whole story if I remember well:The trinity was with the initial sfr 300+ software(wm5);I installed the oli1.20 flashed it with some other ROM software,did not like it and returned to the original one.Then I tried to flash it with the ROM software where all went wrong...After 1 % the screen went blank and all I can do with the device is to put it into the boot-loader mode where it says:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
When I extracted the file,I discovered that it has 2 nbh-files.I think that is the reason of my defete.Afterwords I have tried all sorts of the first aid solutions : splxploit-windows cannot connect to the device;it says that there is no WCEUS-file and therefore it cannot continue.I have tried to re-flash it through the sd-card:I re-formatted the card on fat32,without any name,put the original ROM and tried to let it boot that way.No success,it marks:loading ... and after 3-4 secs it returns into the boot-loader mode with the same message mentioned above ...
Salutations frm Luxembourg , Goran Stevanovic.
Thx all of ya , problem solved.
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
gurnek said:
sir me too have same probelems, but ma 2 htc trinity dnt stuck at bootloaders, its to to operator logo and stuck there, i have 2 phones with this probelem.
please help me to solve this probelem sir.
Click to expand...
Click to collapse
1: Boot into BL (camera + power + reset hole)
2: Download the GPS enabled ROM from HTC Support, NOT from a rapidshare/megaupload/4shared etc.. mirror.
3. Flash the ROM, but use the hardspl flasher.(For some reason, it doesn't go error 270 if I use this flasher).
4. Hard Reset again.
Hello,
I have a HTC P3600 and after i make a hard reset the screen goes all black, i already try flash the phone but don't result.
If i try to make a hard reset again the screen shows "press ok to make hard reset" after that goes black again.and its completing %100 but when i want restart its still doesnt work just black screen. just working light =(
So i think not display problem.
Any solution? help me plss
Any chance of sharing the solution, guys, my SPV M700 has similar problems. I tried to flash it with the TRIN-SSPL rom, but it kept saying I need a newer version of the update software.
Now all I have is it gets stuck on the green Windows load up screen and when I reset (Camera-PWR Button-Reset) it goes onto the bootloader tri-color screen, similar to what Goranchen had on his. What do I do now, I would really like to use the phone on another network, and I have looked after it really well, I think, so would be a shame to throw it away. Please help!!
I just tried to flash a new ROM by putting it on SD CARD...
i pressed my volume up key and power button for 3 seconds and now my phone is stuck on the HTC logo screen...
it did even go in the HSPL screen
whatever i do it reboots and gets stuck to that screen...
pressing the red button at the back made no difference
what can i do ?
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
(1) Take out the battery / Unplug the phone
(2) Put the battery back in
(3) Turn it on and keep only Vol Down pressed
You should get a tri-color screen. Connect USB. Once it says USB at bottom, you are good to go with flashing.
hard reset
these solutions don't work. I had the same problem. Anyone has an idea?
any ideas about that? anyone found the solution?
enter boot loader n flash a new rom via sd card?
omnia1994 said:
enter boot loader n flash a new rom via sd card?
Click to expand...
Click to collapse
already done that... same problem... anything else?
reubenbubu said:
I just tried to flash a new ROM by putting it on SD CARD...
i pressed my volume up key and power button for 3 seconds and now my phone is stuck on the HTC logo screen...
it did even go in the HSPL screen
whatever i do it reboots and gets stuck to that screen...
pressing the red button at the back made no difference
what can i do ?
Click to expand...
Click to collapse
put phone into bootloader requires you to press volume DOWN while power resetting the phone. Make sure the ROM is named LEOIMG.nbh and is on the root of the sd card. Make sure the sd card is 8gb or smaller unless it is a class6.
www.golazo.ca said:
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
Click to expand...
Click to collapse
you need to put your phone back into bootloader, volume down while powering on the phone. then after you see the tricolored screen, connect it to the usb.
t45o5 said:
already done that... same problem... anything else?
Click to expand...
Click to collapse
what problem are you having exactly???? you haven't told us any details to help you.
same problem, after returning back to stock from android, it is stucked on first htc logo.
phone was freezing, so i decided to flash from android to stock, i used micro sd (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship)
now it is stucked. please help
firebroker said:
same problem, after returning back to stock from android, it is stucked on first htc logo.
phone was freezing, so i decided to flash from android to stock, i used micro sd (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship)
now it is stucked. please help
Click to expand...
Click to collapse
stuck where, on the splash screen?
do the same thing only this time use the HTC support page for the correct stock ROM.
thank you it helped, but i had to flash the oldest rom on htc.com.. i wonder why i couldn´t flash newer...
firebroker said:
thank you it helped, but i had to flash the oldest rom on htc.com.. i wonder why i couldn´t flash newer...
Click to expand...
Click to collapse
That's weird, maybe they didn't make a 3.14 ROM for your region.
Help BRicked ! htc incredible s....
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
Just downgrade again, I had same prob. Everything good now.
sent from my inspire 4g using xda app.
kaysen said:
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
Click to expand...
Click to collapse
woah, how the hell did you end up in this forum? lol.
can you get ADB going?
Post your problem in this forum so people who know your device better can help.
http://forum.xda-developers.com/forumdisplay.php?f=1026
HD2 TMOUS stuck after performing task29
www.golazo.ca said:
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
Click to expand...
Click to collapse
im having the same problem!i installed task29 (i had elegancia rom but i wanted to try another rom)and now im stuck on the htc logo screen that says 'stick together' in a red square.....i tried vol down+power button to go into bootloader but nothing happens, then i tried to hard reset but still nothing happens...i pushed the reset button and i did it all over again but still nothing...
my HD2 is a T-MOBILE usa with :
radio 2.08.50.08_2
2.08.HSPL
3.14.531.1 elegancia rom(http://forum.xda-developers.com/showthread.php?t=651729)
i love my hd2 and i want it back...PLEASE HELP!!!!!!!
hi guys
whene i was installing andoird
i forgot to put on boot loader
so now it's stuck in the loadup screen
whene i put out the battery
en press power the boot op screen wil come butt
it wil get stuck on it
so does anywhone fixe my problem here??????
yannick335 said:
hi guys
whene i was installing andoird
i forgot to put on boot loader
so now it's stuck in the loadup screen
whene i put out the battery
en press power the boot op screen wil come butt
it wil get stuck on it
so does anywhone fixe my problem here??????
Click to expand...
Click to collapse
Hi,
Download THIS TOOL.
Open HD2 installer and
Run task 29
Then other tools:install magldr.
i didnt work
i dit what it says
but stil got this problem
yannick335 said:
i didnt work
i dit what it says
but stil got this problem
Click to expand...
Click to collapse
Hi,
What phone do you have 512/1024?
What ROM are you trying to install?
If you are trying to run MAGLDR, did you just power on the device or did you KEEP HOLD of the power button?!?!
i dont exctuly now if it is 512 or 1024
i think it is 512
can i check this right now
is that a problem
i was trying to insstal android drom the dft
whit magldr
yannick335 said:
i dont exctuly now if it is 512 or 1024
i think it is 512
can i check this right now
is that a problem
i was trying to insstal android drom the dft
whit magldr
Click to expand...
Click to collapse
Hi,
Check in settings/about phone/hardware information/memory and it will tell you.
Also I need the NAME of the ROM you are trying to install.
thanks for your help
butt i find it out my self
i downloaded they stock rom form htc.com
one last question
where do i have to put bootloader on my phone
Hi guys!
I have a big problem flashing my HD2. I can't get into bootloader, and can't set the phone to flash mode in magldr. When I try to do it, it says SD kernel open failed, and it starts to blink and it's impossible to navigate. I made a short video:
http://www.youtube.com/watch?v=k50iRAw9gUU
Anybody know what to do?
bdani14 said:
Hi guys!
I have a big problem flashing my HD2. I can't get into bootloader, and can't set the phone to flash mode in magldr. When I try to do it, it says SD kernel open failed, and it starts to blink and it's impossible to navigate. I made a short video:
http://www.youtube.com/watch?v=k50iRAw9gUU
Anybody know what to do?
Click to expand...
Click to collapse
Enter the tri color screen by holding volume down + end key.
task29
reflash everything