hi guys
whene i was installing andoird
i forgot to put on boot loader
so now it's stuck in the loadup screen
whene i put out the battery
en press power the boot op screen wil come butt
it wil get stuck on it
so does anywhone fixe my problem here??????
yannick335 said:
hi guys
whene i was installing andoird
i forgot to put on boot loader
so now it's stuck in the loadup screen
whene i put out the battery
en press power the boot op screen wil come butt
it wil get stuck on it
so does anywhone fixe my problem here??????
Click to expand...
Click to collapse
Hi,
Download THIS TOOL.
Open HD2 installer and
Run task 29
Then other tools:install magldr.
i didnt work
i dit what it says
but stil got this problem
yannick335 said:
i didnt work
i dit what it says
but stil got this problem
Click to expand...
Click to collapse
Hi,
What phone do you have 512/1024?
What ROM are you trying to install?
If you are trying to run MAGLDR, did you just power on the device or did you KEEP HOLD of the power button?!?!
i dont exctuly now if it is 512 or 1024
i think it is 512
can i check this right now
is that a problem
i was trying to insstal android drom the dft
whit magldr
yannick335 said:
i dont exctuly now if it is 512 or 1024
i think it is 512
can i check this right now
is that a problem
i was trying to insstal android drom the dft
whit magldr
Click to expand...
Click to collapse
Hi,
Check in settings/about phone/hardware information/memory and it will tell you.
Also I need the NAME of the ROM you are trying to install.
thanks for your help
butt i find it out my self
i downloaded they stock rom form htc.com
one last question
where do i have to put bootloader on my phone
Related
i want to kno how do i flash to nand again? i followed dzo's steps to flash nand by putting the tar file in my sd card. i got it to boot up to the stock donut that was with it. but now that i try to flash jamezelle's sensehero it jus gets stuck at the htc boot screen. any ideas?
inphin1ty said:
i want to kno how do i flash to nand again? i followed dzo's steps to flash nand by putting the tar file in my sd card. i got it to boot up to the stock donut that was with it. but now that i try to flash jamezelle's sensehero it jus gets stuck at the htc boot screen. any ideas?
Click to expand...
Click to collapse
Read this first and tell me if you still need help...
http://forum.xda-developers.com/showthread.php?t=603508
yea.. thats the one i tried to follow but when i try to boot it up with the sencehero rom it just stays stuck at a loop of the htc/hero screen
check and see what the resolution need to be to run that version. i ran into the same problem when i tried doing it from the sd. im betting its the same issue
I have a feeling it was your kernel...make sure you have the right size too. Hero is 320 x 480
im thinking it is the kernel too.. but now i want to know how do i flash it with romupdate again if i already used romupdate? when i plug in my phone to usb and try to run romupdate it says it doesn't find my phone plugged in =/
inphin1ty said:
im thinking it is the kernel too.. but now i want to know how do i flash it with romupdate again if i already used romupdate? when i plug in my phone to usb and try to run romupdate it says it doesn't find my phone plugged in =/
Click to expand...
Click to collapse
did you put your phone in bootloader mode?
put it in bootloader mode. Hold camera, power, and hit the power reset in the pin hole on the bottom of the phone. Then try.
THank you thank you. it worked like a charm. finally got sensehero haha
I just tried to flash a new ROM by putting it on SD CARD...
i pressed my volume up key and power button for 3 seconds and now my phone is stuck on the HTC logo screen...
it did even go in the HSPL screen
whatever i do it reboots and gets stuck to that screen...
pressing the red button at the back made no difference
what can i do ?
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
(1) Take out the battery / Unplug the phone
(2) Put the battery back in
(3) Turn it on and keep only Vol Down pressed
You should get a tri-color screen. Connect USB. Once it says USB at bottom, you are good to go with flashing.
hard reset
these solutions don't work. I had the same problem. Anyone has an idea?
any ideas about that? anyone found the solution?
enter boot loader n flash a new rom via sd card?
omnia1994 said:
enter boot loader n flash a new rom via sd card?
Click to expand...
Click to collapse
already done that... same problem... anything else?
reubenbubu said:
I just tried to flash a new ROM by putting it on SD CARD...
i pressed my volume up key and power button for 3 seconds and now my phone is stuck on the HTC logo screen...
it did even go in the HSPL screen
whatever i do it reboots and gets stuck to that screen...
pressing the red button at the back made no difference
what can i do ?
Click to expand...
Click to collapse
put phone into bootloader requires you to press volume DOWN while power resetting the phone. Make sure the ROM is named LEOIMG.nbh and is on the root of the sd card. Make sure the sd card is 8gb or smaller unless it is a class6.
www.golazo.ca said:
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
Click to expand...
Click to collapse
you need to put your phone back into bootloader, volume down while powering on the phone. then after you see the tricolored screen, connect it to the usb.
t45o5 said:
already done that... same problem... anything else?
Click to expand...
Click to collapse
what problem are you having exactly???? you haven't told us any details to help you.
same problem, after returning back to stock from android, it is stucked on first htc logo.
phone was freezing, so i decided to flash from android to stock, i used micro sd (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship)
now it is stucked. please help
firebroker said:
same problem, after returning back to stock from android, it is stucked on first htc logo.
phone was freezing, so i decided to flash from android to stock, i used micro sd (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship)
now it is stucked. please help
Click to expand...
Click to collapse
stuck where, on the splash screen?
do the same thing only this time use the HTC support page for the correct stock ROM.
thank you it helped, but i had to flash the oldest rom on htc.com.. i wonder why i couldn´t flash newer...
firebroker said:
thank you it helped, but i had to flash the oldest rom on htc.com.. i wonder why i couldn´t flash newer...
Click to expand...
Click to collapse
That's weird, maybe they didn't make a 3.14 ROM for your region.
Help BRicked ! htc incredible s....
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
Just downgrade again, I had same prob. Everything good now.
sent from my inspire 4g using xda app.
kaysen said:
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
Click to expand...
Click to collapse
woah, how the hell did you end up in this forum? lol.
can you get ADB going?
Post your problem in this forum so people who know your device better can help.
http://forum.xda-developers.com/forumdisplay.php?f=1026
HD2 TMOUS stuck after performing task29
www.golazo.ca said:
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
Click to expand...
Click to collapse
im having the same problem!i installed task29 (i had elegancia rom but i wanted to try another rom)and now im stuck on the htc logo screen that says 'stick together' in a red square.....i tried vol down+power button to go into bootloader but nothing happens, then i tried to hard reset but still nothing happens...i pushed the reset button and i did it all over again but still nothing...
my HD2 is a T-MOBILE usa with :
radio 2.08.50.08_2
2.08.HSPL
3.14.531.1 elegancia rom(http://forum.xda-developers.com/showthread.php?t=651729)
i love my hd2 and i want it back...PLEASE HELP!!!!!!!
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Try the HR (hard reset)
turn the phone off
press and hold volume up & down together and power up the phone same time
That should hard reset your phone
Than press and hold volume down and power on the phone and that should bring u into the bootscreen mode
mariodna said:
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
Hi all
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Click to expand...
Click to collapse
rikardo1979 said:
Try the HR (hard reset)
turn the phone off
press and hold volume up & down together and power up the phone same time
That should hard reset your phone
Than press and hold volume up and power on the phone and that should bring u into the bootscreen mode
Click to expand...
Click to collapse
Nothing... only load the magldr....
but the buttons are ok because i can move on the magldr menu
so than try this-
switch off the phone
take off the battery cover and find the red like small button under it. press and hold it for few seconds than try the first step again
mariodna said:
Nothing... only load the magldr....
but the buttons are ok because i can move on the magldr menu
Click to expand...
Click to collapse
rikardo1979 said:
so than try this-
switch off the phone
take off the battery cover and find the red like small button under it. press and hold it for few seconds than try the first step again
Click to expand...
Click to collapse
:S Nothing....
not happened to anyone else?
my Hd2 is now a brick?
mariodna said:
not happened to anyone else?
my Hd2 is now a brick?
Click to expand...
Click to collapse
How about reinstalling android all over again? Maybe that can solve the problem.
If you are willing to do it, just go into bootloader screen, flash task 29, flash Magldr 1.13, flash CWM (dependent on the partition lay out required by the relevant rom), and flash the ROM (Nandroid).
Good luck
rikardo1979 said:
Than press and hold volume up and power on the phone and that should bring u into the bootscreen mode
Click to expand...
Click to collapse
as far as i remember it was the volume down button to get into booloader.
silverwind said:
How about reinstalling android all over again? Maybe that can solve the problem.
If you are willing to do it, just go into bootloader screen, flash task 29, flash Magldr 1.13, flash CWM (dependent on the partition lay out required by the relevant rom), and flash the ROM (Nandroid).
Good luck
Click to expand...
Click to collapse
I don´t understand all...do you say me taht install android again??¿ i tried...with recovery mode, DAF mode and data2ext4.... but nothing....
Are you sure you're just downloading ROM's and using the same Clockworl for all? All ROM's have different partition layout requirements for Clockwork. Check out the ROM thread and look for something about the Clockwork partition size. I usually just Ctrl Find then look for 'CWM'.
If that's not the case, you may be downloading ROM's which need an Ext3/4 partition on the SD card. Do you have an Ext partition?
Well you have the partition, so the only thong it could be, quite possibly is the wrong Clockwork size. As far as I know, I think there's an included file in the TyphooN thread that has a CWM inside it. Download it, flash it via the .daf file, then go back in to recovery and flash the TyphooN .zip again.
mariodna said:
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Click to expand...
Click to collapse
Reading other posts I see you have tried everything, so I suggest you go back to the start, i.e install a Win 6.5 rom from HTC using the SD card method which will erase everything on your phone(including HSPL) and revert your phone back to factory status..
and then try again, use a Android NAND rom which does not required any ext/data2sd/apps2sd partition by default and see where u get with it.
yeah, u right. its volume down my bad sorry
it was a long night for me
greg17477 said:
as far as i remember it was the volume down button to get into booloader.
Click to expand...
Click to collapse
Here's the CWM file you should be flashing if you're using TyphooN.
http://www.multiupload.com/5VH6M9XM8B
No need to restore to factory ROM etc. as even a Task 29 would be more useful and easier.
Thank you very much when i arrive to my home i try the options that you tell me.
Thank you again
No problem-o.
Don't forget, if I helped, don't forget the 'Thanks' button.
Curry curry curry
greg17477 said:
as far as i remember it was the volume down button to get into booloader.
Click to expand...
Click to collapse
You're from India aren't you
rikardo1979 said:
yeah, u right. its volume down my bad sorry
it was a long night for me
Click to expand...
Click to collapse
as long as it was a good night, you are excused
ALL_XDA_MODS_R_C*NTS said:
You're from India aren't you
Click to expand...
Click to collapse
wrong, try again
Sorry i was working this days...
I think that i made good the partitions... but any romload compleate.... Recovery don´t run, when i install a DAF Rom the load stop in te first screen.....
And i can´t do the tricolor screen... the buttons are well...but the tricolor screen no....
Sorry could you try explain in better English? Maybe use a translator.
Hey Guys I Recently tried to flash Clockwork mod so i could get this rom http://forum.xda-developers.com/showthread.php?t=1036948&page=4
Did everything right but now my phone is stuck on the magldr boot screen and my old android rom wont load:[ and now my phone wont turn on unless its connected to the usb:[ please help it wont let me boot ad sd It says SD Kernel Open Failed and whenever i go down to AD Recovery it loads up but my phone turns off after Load Done! 123456, How can i get this working please Help!
Stealthy_Stoner said:
Hey Guys I Recently tried to flash Clockwork mod so i could get this rom http://forum.xda-developers.com/showthread.php?t=1036948&page=4
Did everything right but now my phone is stuck on the magldr boot screen and my old android rom wont load:[ and now my phone wont turn on unless its connected to the usb:[ please help it wont let me boot ad sd It says SD Kernel Open Failed and whenever i go down to AD Recovery it loads up but my phone turns off after Load Done! 123456, How can i get this working please Help!
Click to expand...
Click to collapse
ok, 1. theres a quetions sub thread for you to post questions in, this is not it.
2. thers a magldr and clokwork thread you could post in, why dont you?
3. your battery doesnt have any juice, so you can either get a standalone battery charger to charge it, or do like i did and cut a usb cable, attach the +5 and negative terminals to teh battery for 5 minutes so it has juice.
and 4. it sounds like you didnt resize your partitions when you flashed the new rom, i cant believe how many newbes overlook that step. specifically it sounds like your boot partition is to small, but thats just a guess.
i can guarantee you this thread will get moved to the questions & answers thread, so dont be suprised when you dont see it here anymore.
Sorry Bro Im A Newb lol But Yeah i guess I skipped that step and i tried to reflash my old Nand Rom and it gets stuck on the DFT Screen And turns off :/ My Hd2 still wont turn on unless its connected to usb
Okay so i managed to get my old rom back up but all my apps and settings were erased:[ how can i get my clockwork mod back up to work?
Stealthy_Stoner said:
Okay so i managed to get my old rom back up but all my apps and settings were erased:[ how can i get my clockwork mod back up to work?
Click to expand...
Click to collapse
You have to boot into MAGLDR by holding the power button down while your HD2 powers on. Scroll down to option #8 AD Recovery and press send thos will boot CWM.
T-Macgnolia said:
You have to boot into MAGLDR by holding the power button down while your HD2 powers on. Scroll down to option #8 AD Recovery and press send thos will boot CWM.
Click to expand...
Click to collapse
How do I partition or whatever ? Im Still trying to get the rom from my original post? Please Help Me:/
Stealthy_Stoner said:
How do I partition or whatever ? Im Still trying to get the rom from my original post? Please Help Me:/
Click to expand...
Click to collapse
Oh and i just tried that but it said theres no boot sources? so im guessing when i flashed my old rom back on it ****ed it up? so do i have to reflash CWM? And if so how do i do the partition so i can get that rom up there? :3 thanks
I would like to piggy back on this problem. When I press option 8 my HD2 does not go into CWM. It hangs at "Load done1 E1 Fatal hit" Has anyone else come across this and knows the fix so I can get into CWM? Thanks
hello,
yesterday i was booting up my phone but it stucks at the green HTC logo and then i've performed a hard reset but it had no succes it still stucks at the HTC logo. I've searched on google for the problem but nothing of all the answers worked for me. last night i've let the battery out for 8 hours and when i put it back in it boots into de welcome screen of windows mobile 6.5 but there it freezes again so i pulled out the battery and when i rebooted the phone it stucks again at the HTC logo. I've tried to install the newest rom from the HTC site but it still stucks at the HTC screen
i don't have hspl so i cant try different roms
i hope someone can help me
sorry about my english it sucks
technobram said:
hello,
yesterday i was booting up my phone but it stucks at the green HTC logo and then i've performed a hard reset but it had no succes it still stucks at the HTC logo. I've searched on google for the problem but nothing of all the answers worked for me. last night i've let the battery out for 8 hours and when i put it back in it boots into de welcome screen of windows mobile 6.5 but there it freezes again so i pulled out the battery and when i rebooted the phone it stucks again at the HTC logo. I've tried to install the newest rom from the HTC site but it still stucks at the HTC screen
i don't have hspl so i cant try different roms
i hope someone can help me
sorry about my english it sucks
Click to expand...
Click to collapse
You should try to put in a freezer(in a plastic bag, without battery) for 15-20 minutes and then try to flash your wm ROM and see what happens...
ive installed android nand on it and it works until it suddenly freezes
so maybe it is an overheating problem??
technobram said:
ive installed android nand on it and it works until it suddenly freezes
so maybe it is an overheating problem??
Click to expand...
Click to collapse
It looks like that to me!
Have you tried not using the latest HTC ROM but the previous version. Could be a bug in the ROM or possibly bad blocks causing a problem. I would suggest a task 29 wipe before installing the ROM. Can be found easily in the forum. I had a similar problem that fixed it for me. On android now though.
Maybe increase the cache partition and the ROM partition to allow for possible bad blocks that can cause problems especially in nand. Usually allowing an extra 5mb on each partition should do it. If you dont know how find the hd2 toolkit as that will be the easiest way. All on the forum. Hope this helps
Sent from my HTC HD2 using xda app-developers app
bobby1503 said:
Have you tried not using the latest HTC ROM but the previous version. Could be a bug in the ROM or possibly bad blocks causing a problem. I would suggest a task 29 wipe before installing the ROM. Can be found easily in the forum. I had a similar problem that fixed it for me. On android now though.
Maybe increase the cache partition and the ROM partition to allow for possible bad blocks that can cause problems especially in nand. Usually allowing an extra 5mb on each partition should do it. If you dont know how find the hd2 toolkit as that will be the easiest way. All on the forum. Hope this helps
Sent from my HTC HD2 using xda app-developers app
Click to expand...
Click to collapse
oke ive installed hspl and if i install a different rom it still freezes at the htc logo so tommorow im going to try installing stock rom v1.66
but now i'm going to sleep
(i live in the netherlands so its a different time)
technobram said:
oke ive installed hspl and if i install a different rom it still freezes at the htc logo so tommorow im going to try installing stock rom v1.66
but now i'm going to sleep
(i live in the netherlands so its a different time)
Click to expand...
Click to collapse
Putting in the original romantic should fix this.. Just sounds like the partitions are not big enough or the ROMS could have issues. When installing the original rom it should clear the whole phone and boot up fine. Might take a while on first boot.
Sent from my HTC HD2 using xda app-developers app
oke this is weird if i wanna install any stock rom it says:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
RCUST -
BOOTLOADER -
SPLASH1 -
OS -
CONFIGDATA -
update terminate
UPDATE FAIL
what should i do??
technobram said:
oke this is weird if i wanna install any stock rom it says:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
RCUST -
BOOTLOADER -
SPLASH1 -
OS -
CONFIGDATA -
update terminate
UPDATE FAIL
what should i do??
Click to expand...
Click to collapse
This looks like a wrong radio flash
bib*oops said:
This looks like a wrong radio flash
Click to expand...
Click to collapse
oke thanks but what should i do now?
right now i can't flash any stock rom
technobram said:
oke thanks but what should i do now?
right now i can't flash any stock rom
Click to expand...
Click to collapse
Unfortunately I can't suggest you a solution, I'm looking for a way out of this too...
have u tried booting into bootloader?
?!
rprevis said:
have u tried booting into bootloader?
Click to expand...
Click to collapse
Have you read previous posts, at least?
sorry for the late response but ive tried all the solutions but they all did not worked
i have the exactly same problem...
and i dunno what todo now...
PS. Seems that i cant flash anything in the bootloader mode...
oke i've discovered that it is a vodafone branded phone.
so then i've tried to put the vodafone romm on it.
so first i performed a task 29.
and then i've replaced hardspl with the original spl (v 3.03.0000)
but after that it wont boot anymore the screen just stays black i can't even boot into the bootloader
it just makes a weird clicking noise and the scren stays black
does anyone knows a solution for this
technobram said:
oke i've discovered that it is a vodafone branded phone.
so then i've tried to put the vodafone romm on it.
so first i performed a task 29.
and then i've replaced hardspl with the original spl (v 3.03.0000)
but after that it wont boot anymore the screen just stays black i can't even boot into the bootloader
it just makes a weird clicking noise and the scren stays black
does anyone knows a solution for this
Click to expand...
Click to collapse
Are you sure it was a Vodafone HD2? Does it have a red end/power button and a green call button? If it does then that is a TMOUS that does not have the T-Mobile logo on it for some reason and you have radio bricked the device. The fact that you can not boot into bootloader means you are bricked period even if it is not a TMOUS HD2. Now the only fix for your device is to have it JTAGed or a new PCB board put in the device. Now if you can not find someone locally or in your region of the worl that can JTAG your device PM me and I can refer you to someone that can and is very good at it.
i live in the netherlands si it's very hard for me to find someone that can perform a jtag
Same problem for me
I have exactly the same problem.. :crying:
Try this just for grins.
Take out the battery and MAKE SURE all of the pins on the back of the device are hitting the battery where they are supposed to and not bent or anything.
I don't see how doing a task29 and changing the SPL would brick the phone if it DID brick,it should have done it after the ROM or Radio flash.
If you did things in this order ROM -> reboot -> task29 -> reboot -> SPL, then you should still be able to access bootloader.
Not sure why you'd flash a ROM then task29 though.
Anyways, if you flashed the wrong ROM from SD then yeah, you are bricked (if that was the last thing you did) but try the battery thing.