Related
all i get is the telus boot screen and thats it. is there anyway to flash the rom onto it? or restart it some how?ive tried to take out the battery and restart it that way and still boot screen.
I think you can do a hard reset by holding the "power button", "end key", and pressing the reset "pinhole" at the same time.
foxatphoenixlabs said:
all i get is the telus boot screen and thats it. is there anyway to flash the rom onto it? or restart it some how?ive tried to take out the battery and restart it that way and still boot screen.
Click to expand...
Click to collapse
have you tried getting into bootloader by pressing power/camera/reset?
when did this start happening?
The same thing happened to me today... Im frozen at the htc smart mobility boot up screen and nothing works!
if your phone was older and you tried to flash a GPS rom without installing the GPS radio then you would freeze up a the bootscreen
the remedy for that would be to install the 3.42 radio ROM
raybond25 said:
if your phone was older and you tried to flash a GPS rom without installing the GPS radio then you would freeze up a the bootscreen
the remedy for that would be to install the 3.42 radio ROM
Click to expand...
Click to collapse
I think I have same problem.
Anyone have a link where I could find that & install instructions to make sure I don't screw up more?
This happened to me too. I ended up having to reflash it like everyone said.
My htc hd2 is stuck on the boot up screen,tried pressing the end key and the red reboot button at the same time but still no progress,still stuck.....what now? help please
Hannoe said:
My htc hd2 is stuck on the boot up screen,tried pressing the end key and the red reboot button at the same time but still no progress,still stuck.....what now? help please
Click to expand...
Click to collapse
You are in the wrong section altogether. Go to this part of the site http://forum.xda-developers.com/forumdisplay.php?f=631
@OP,
First things first, did you unlock the device before flashing? Also, are you sure that you have a Vogue and not an Elf/Elfin?
A quick way to get out of your issues would be to try to flash the phone back to stock. Put the device in bootloader mode and flash a stock rom for your device.
After freezing my device I tried to open but not opened then I tried to make soft reset again it didnt open then I tried hard reset but the normal menu didnt come instead the menu which is attached appear and telling something serial but not doing hard set now I dont know what I must do Please help
http://img594.imageshack.us/img594/2927/imga0024.jpg
http://img208.imageshack.us/img208/1889/imga0025n.jpg
Thats your bootloader.....
to do a hard reset its...
hold down volume up and volume down
tap and release power
keep holding both volume buttons down....
I think whats happening is that your only holding the volume down.
Try taking your battery cover off to get a better press and making sure that up and down are held, then tap the power button.........
hope that helps.....
help
Thanks for explanation but it is stilll not working and in addition today for solving this problem I tried to reinstall rom using cd card this case it is waiting at the (loading ) stage I dont know how can I solve this problem
Had any luck yet?...........
Ok, few more questions.......
What rom did you try to flash via sd card?
What rom were you using before it crashed?
Is it a tmous hd2 (green and red buttons?) or a "normal one"?
What happened to make it freeze crash?
Can you still get to bootloader? (the screen you posted above)
If you can then go to that screen and connect your phone via usb......
wait a few mins and let us know if the word "serial" at the bottom of the screen changes to "usb"........
If it does you should be able to flash a rom via your computer......
thanks for your help but Still I am not lucky
What rom did you try to flash via sd card?
WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship(2).exe
What rom were you using before it crashed?
HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
Is it a tmous hd2 (green and red buttons?) or a "normal one"?
Yes Normal one
What happened to make it freeze crash?
nothing only I have re install sprite and rim backups (whic I had before) it started normally and while working freezed I closed and not opened it is staying and wait at (HTC guietly brillant ) stage
Can you still get to bootloader? (the screen you posted above)
Yes I can
http://rapidshare.com/files/409788656/serial.JPG
http://rapidshare.com/files/409788686/usb.JPG
If you can then go to that screen and connect your phone via usb......
wait a few mins and let us know if the word "serial" at the bottom of the screen changes to "usb"........
as seen above links I can connect as you describe
If it does you should be able to flash a rom via your computer.....
Unfortunatelly I can not I tried everything flashing rom, radio ,and task 29 in every case it not started wait as seen picture (only hspl worked)
http://rapidshare.com/files/409788488/pc1.JPG
http://rapidshare.com/files/409788523/pc2.JPG
and give connection error
http://rapidshare.com/files/409788826/pcer.JPG
if I had tried flash rom from sd card then freezing at loading stage
http://rapidshare.com/files/409788629/sd_card.JPG
during this time I learned many things ) but still my knowledge not enough to solve this problem please help !!!
ok have a look at this thread and see how you get on
forum.xda-developers.com/showthread.php?t=298516
try uninstalling actvesync from your pc...... then reinstalling it
would you be able to try and flash on someone elses pc?
im not sure if this would help or not but im running out of ideas im afraid....
My friend, if the phone starts at all you definitely should be able to do HARD RESET.
You are probably not doing well the hard reset. You cannot destroy bootloader with backup programs.
You should :
-hold pressed volume up and volume down buttons
-tap and release power button
-keep holding both volume buttons down for several more seconds until three color screen appears and shortly after that a message will appear on lite blue screen. Then release both volume buttons. Then press volume up button, usually it is necessary to press it once again. System restoring bar will begin to raise up to 100%. After that pres again volume up and system will restart.
By the way your initial rom is 1.66 but on the pictures is 1.48. So you did pictures after you flashed it. Also noted that you have flashed HSPL.
Suggest to download your initial original rom and install it from the memory card. Not sure but may be downgrade of the rom is not possible from 1.66 to 1.44.
I solved my problem
Thanks to masters very much I reinstall active sync and then I flash rom and all my problems cancelled out )
nice one, glad you got it fixed.....
kuwait said:
My friend, if the phone starts at all you definitely should be able to do HARD RESET.
You are probably not doing well the hard reset. You cannot destroy bootloader with backup programs.
You should :
-hold pressed volume up and volume down buttons
-tap and release power button
-keep holding both volume buttons down for several more seconds until three color screen appears and shortly after that a message will appear on lite blue screen. Then release both volume buttons. Then press volume up button, usually it is necessary to press it once again. System restoring bar will begin to raise up to 100%. After that pres again volume up and system will restart.
Click to expand...
Click to collapse
After bricking my phone, then my underpants ^^... you sir are a lifesaver.
thank you very much.
Thanks to masters very much I reinstall active sync and then I flash rom and all my problems cancelled out
bootloader problem
conantroutman said:
Had any luck yet?...........
Ok, few more questions.......
What rom did you try to flash via sd card?
What rom were you using before it crashed?
Is it a tmous hd2 (green and red buttons?) or a "normal one"?
What happened to make it freeze crash?
Can you still get to bootloader? (the screen you posted above)
If you can then go to that screen and connect your phone via usb......
wait a few mins and let us know if the word "serial" at the bottom of the screen changes to "usb"........
If it does you should be able to flash a rom via your computer......
Click to expand...
Click to collapse
I can get the bootloader but it keeps showing "serial" even after connecting it to to the computer.
the "usb" does not come and i cannot update the rom
currently i'm using hyperdroid GBX v11 which is working fine (just one problem that it shows blank screen after a call ends and no display till another call comes) please help
mirchandani84 said:
I can get the bootloader but it keeps showing "serial" even after connecting it to to the computer.
the "usb" does not come and i cannot update the rom
currently i'm using hyperdroid GBX v11 which is working fine (just one problem that it shows blank screen after a call ends and no display till another call comes) please help
Click to expand...
Click to collapse
Hmmm......
Try, using another USB port or computer.
Reinstall activesync.
Have you tried flashing from SD card?
Sent from my fingers to your face...
same problem
kuwait said:
By the way your initial rom is 1.66 but on the pictures is 1.48. So you did pictures after you flashed it. Also noted that you have flashed HSPL.
Suggest to download your initial original rom and install it from the memory card. Not sure but may be downgrade of the rom is not possible from 1.66 to 1.44.
Click to expand...
Click to collapse
i have the same problem, and my information on the screen is
PB81120 SSB3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
any help? im hard rebooting cause idk the pasword and i cant get on the phone:crying::crying::crying:
To all of you having the "same problem"
If you are 100% sure your stock rom is correct. rename the .nbh file to LEOIMG.NBH, put it on the root of your SD card, and boot into bootloader, it will flash.
IF YOU ARE UNSURE IF YOUR STOCK IS CORRECT POST HERE FIRST OR YOU MAY BRICK YOUR PHONE,
better to look noob than to brick, there are too many versions of this phone to mess around here.
same problem and a bootloop
omranlibanon said:
same problem and a bootloop
Click to expand...
Click to collapse
Did you flash stock via SD?
yes i flashed via sd card its a nand rom TBD_Sensation_XL_Gen3_stock_V3.7
I flashed my phone and worked great, then flashed the phone to a different ROM Kumar premier and the phone was just shuting off by it self and now the phone is stuck on the page that has "core cell" design, with the red writing in the bottom left corner what do I do. Please help.
reflash
try to reflash the stock rom first to remove the core rom boot screen. after that do a task29 then flash the kumar rom again
OK so I am new at this where do i get a stock ROM and what is a task29?
Ok so Now I cant even connect to the activsync to try and flash it again.
Task29 basically wipes all traces of the ROM/OS (not the radio) off the device. Now it's easy to do, using this .exe by doloop.
(remember, afterwords you will not have an OS on the phone. Just the splash screen you're looking at now)
Here's the thread as well, might want to read that to understand it better.
jsfengine said:
Ok so Now I cant even connect to the activsync to try and flash it again.
Click to expand...
Click to collapse
no need for active sync connection, , from here on, till you fix it, do everything from bootloader. So long as it says 'usb' in bootloader, flashing will work.
OK so I just have never heard of bootloader or just never heard used like that please point in that direction. If you cant do it from activsync then how do you do it if cant connect to the computer.
hold the volume down button while turning on will get you to the bootloader
and the stock rom you're looking for is in the the sub forum list.
OK so I am ready to do this but man I still have no way to connect to my computer to do it. The phone and the computer are not talking without activsync, so I am not sure how to do it without this HELP ME PLEASE.
OK so i messed this up bad a taks29 this thing without a stock rom on it and no it stuck on that damn screen and will not connect to my computer to flash it please help me
can you go into the boot loader? the tricolors screen? when you plug the cable do you see USB at the bottom? if you do then you are connected and ready to flash
jsfengine said:
OK so i messed this up bad a taks29 this thing without a stock rom on it and no it stuck on that damn screen and will not connect to my computer to flash it please help me
Click to expand...
Click to collapse
Everything you are trying to do has been said in this thread..
Task29 will leave you with ONLY the splash screen (and radio) and if you don't go into bootloader when you restart (hold volume down) it will keep going to that screen and your PC won't be able to connect. So restart (power off then power on while holding volume down until tricolor screen)
All makin sense now?
Thank you so much I got it working thanks for all the help
Ok so I am having issues with the phone just shutting off and restarting while i am making phone calls. Do you think that this is the flash or just the phone itself? Do you think that it is the ROM? Thanks
try to reflash the rom
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Try the HR (hard reset)
turn the phone off
press and hold volume up & down together and power up the phone same time
That should hard reset your phone
Than press and hold volume down and power on the phone and that should bring u into the bootscreen mode
mariodna said:
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
Hi all
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Click to expand...
Click to collapse
rikardo1979 said:
Try the HR (hard reset)
turn the phone off
press and hold volume up & down together and power up the phone same time
That should hard reset your phone
Than press and hold volume up and power on the phone and that should bring u into the bootscreen mode
Click to expand...
Click to collapse
Nothing... only load the magldr....
but the buttons are ok because i can move on the magldr menu
so than try this-
switch off the phone
take off the battery cover and find the red like small button under it. press and hold it for few seconds than try the first step again
mariodna said:
Nothing... only load the magldr....
but the buttons are ok because i can move on the magldr menu
Click to expand...
Click to collapse
rikardo1979 said:
so than try this-
switch off the phone
take off the battery cover and find the red like small button under it. press and hold it for few seconds than try the first step again
Click to expand...
Click to collapse
:S Nothing....
not happened to anyone else?
my Hd2 is now a brick?
mariodna said:
not happened to anyone else?
my Hd2 is now a brick?
Click to expand...
Click to collapse
How about reinstalling android all over again? Maybe that can solve the problem.
If you are willing to do it, just go into bootloader screen, flash task 29, flash Magldr 1.13, flash CWM (dependent on the partition lay out required by the relevant rom), and flash the ROM (Nandroid).
Good luck
rikardo1979 said:
Than press and hold volume up and power on the phone and that should bring u into the bootscreen mode
Click to expand...
Click to collapse
as far as i remember it was the volume down button to get into booloader.
silverwind said:
How about reinstalling android all over again? Maybe that can solve the problem.
If you are willing to do it, just go into bootloader screen, flash task 29, flash Magldr 1.13, flash CWM (dependent on the partition lay out required by the relevant rom), and flash the ROM (Nandroid).
Good luck
Click to expand...
Click to collapse
I don´t understand all...do you say me taht install android again??¿ i tried...with recovery mode, DAF mode and data2ext4.... but nothing....
Are you sure you're just downloading ROM's and using the same Clockworl for all? All ROM's have different partition layout requirements for Clockwork. Check out the ROM thread and look for something about the Clockwork partition size. I usually just Ctrl Find then look for 'CWM'.
If that's not the case, you may be downloading ROM's which need an Ext3/4 partition on the SD card. Do you have an Ext partition?
Well you have the partition, so the only thong it could be, quite possibly is the wrong Clockwork size. As far as I know, I think there's an included file in the TyphooN thread that has a CWM inside it. Download it, flash it via the .daf file, then go back in to recovery and flash the TyphooN .zip again.
mariodna said:
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Click to expand...
Click to collapse
Reading other posts I see you have tried everything, so I suggest you go back to the start, i.e install a Win 6.5 rom from HTC using the SD card method which will erase everything on your phone(including HSPL) and revert your phone back to factory status..
and then try again, use a Android NAND rom which does not required any ext/data2sd/apps2sd partition by default and see where u get with it.
yeah, u right. its volume down my bad sorry
it was a long night for me
greg17477 said:
as far as i remember it was the volume down button to get into booloader.
Click to expand...
Click to collapse
Here's the CWM file you should be flashing if you're using TyphooN.
http://www.multiupload.com/5VH6M9XM8B
No need to restore to factory ROM etc. as even a Task 29 would be more useful and easier.
Thank you very much when i arrive to my home i try the options that you tell me.
Thank you again
No problem-o.
Don't forget, if I helped, don't forget the 'Thanks' button.
Curry curry curry
greg17477 said:
as far as i remember it was the volume down button to get into booloader.
Click to expand...
Click to collapse
You're from India aren't you
rikardo1979 said:
yeah, u right. its volume down my bad sorry
it was a long night for me
Click to expand...
Click to collapse
as long as it was a good night, you are excused
ALL_XDA_MODS_R_C*NTS said:
You're from India aren't you
Click to expand...
Click to collapse
wrong, try again
Sorry i was working this days...
I think that i made good the partitions... but any romload compleate.... Recovery don´t run, when i install a DAF Rom the load stop in te first screen.....
And i can´t do the tricolor screen... the buttons are well...but the tricolor screen no....
Sorry could you try explain in better English? Maybe use a translator.
Hi,
I was actually trying to put ICS on my device from GingerBread Nand.I connect device with USB and I was trying to Wipe using HD2 Nand Toolkit.As device reached 100%, it suppose to restart but in my case it hanged at 100% for 30 mins .Then I restart by removing the battery.Now when 3 color screen shows, it shows serial at the bottom but it change to usb when I connect to pc .The problem is now when I try to re-partition ,it says device is not connected.
So I thought I may be able to install windows by downloading actual rom from T-Mobile and place the file to sd card by renaming it to LEOIMG.nbh.I did it using a class 2 16Gb card.As I press both volume down key and power button, it goes right to the rainbow screen.Please help me!
Thanks for reading the issue.
Are you using cLK or magldr?
Thanks for your reply.Actually i wanted to use cLK but I actually could not able to go that far.Please read the problem which might give you some clue to help me.
Waht does it say at the top of the tri-colour screen?
have a look here
http://forum.xda-developers.com/showthread.php?t=1402975
and here
http://forum.xda-developers.com/showthread.php?t=1021837
let me know if your still having problems after reading.......
Personally, I'ld just go back to win6.5
http://forum.xda-developers.com/showthread.php?t=623283
and start over again.
Works for me most of the time.