Database Users

[sgt]-[discussion room] CyanogenMOD 9.0 by te4m[MTD][4.0.4]

CyanogenMOD 9.0 by TE4M NOW MTD!!!!!![4.0.4]
dear all,
this thread is created to seperate non development post inside the cm9 development thread and to keep it clean.
WHAT CAN BE POSTED HERE?
-Related to cm9.0
-problems during installation
-Possibilities of bugs
-All the noob questions
WHAT should not be posted?
-thanks,thank you....
-please do not report SAME BUG
-Do not report if you are downloading new release (just download it and report bugs only)
CM9.0 THREAD
http://forum.xda-developers.com/showthread.php?t=1385153
HUMBEROS UPLOAD AREA
http://www.humberos.com.br/p/android-ics.html
GREAT NOW WE HAVE OFFICIAL NIGHTLIES
GSM- http://get.cm/?device=p1
CDMA- http://get.cm/?device=p1c
PEOPLE BE CAREFUL!!!!! NOW BUILDS ARE MTD (FOR MORE INFORMATION LOOK AT POST 2)
hit thanks if i helped you

Installation guide
PEOPLE NOW BUILDS ARE MTD!! FILE SYSTEM BE CAREFULL
FOR INSTALLING MTD BUILD IT IS [MUST] COMPULSORY TO RESTOCK[ FOLLOW TILL STEP 3]
DONOT!!!!!! RESTORE ANY OTHER BUILDS ON MTD BUILDS
IF WANT TO GO BACK TO GB RESTOCK IS AGAIN NEEDED!!!
1)RESTOCK to gingerbread by following overcome method
www.teamovercome.net
2)flash the overcome kernel 4.0 to convert the system to ext4 from the above website
3)DOWNLOAD ANY ANY BUILD [OFFICIAL NIGHTLY OR SOMEONE ELSE BUILD]
4)copy the zip to tab and then reboot into recovery
5)wipe data,cache and dalvik cache
6) a) if MTD build once u flash them mtd zip it boots into mtd recovery and U HAVE TO FLASH THE ZIP AGAIN
b) if NON MTD just flash the zip
7)reboot!!!!

What doesnt work (19-04-2012-build)mtd
tv out
minors
external sd as sd-ext
gps (unconfirmed)
ums

Any chance of p1000l owners can have the TV mobile apk working? I've been trying to restore it with titanium and I have not been able to restore it.
By the way, anyone having low battery time?

Hatori28 said:
Any chance of p1000l owners can have the TV mobile apk working? I've been trying to restore it with titanium and I have not been able to restore it.
By the way, anyone having low battery time?
Click to expand...
Click to collapse
titanium backup not working on the build

The new update seems to eliminate the software keys; is there a way to reenable them?

Don t agree just wipe everything and restore user app with Tb. Works fine however i think it s a bad idea do such about system/data.
Sent from my GT-P1000 using XDA App

ronak.super said:
titanium backup not working on the build
Click to expand...
Click to collapse
If you haven't already done that, update your TB, the last version works on ICS.

I've been really enjoying this build. Thanks alot for the whole team!
UI runs very smooth and basicly no log at all.
Almost everything works better compared to the orginal 2.3.3 stock rom I used before.
Few things I noticed, the battery life seems to be somewhat worse.
Also a question about the multitasking in ICS. I cant find a way to open the thumbnails? Long pressing home doesnt seem to work and since theres no software based keys (which I think is a good thing) I'm not sure what to do.
Tab P1000 and I'm using the latest kerned (30.1) with bt fix and rom.

Medikay said:
The new update seems to eliminate the software keys; is there a way to reenable them?
Click to expand...
Click to collapse
in build prop set
setprop persist.tablet.hidehome 0
setprop persist.tablet.hiderecent 0
setprop persist.tablet.hideback 0

Graven-eof said:
I've been really enjoying this build. Thanks alot for the whole team!
UI runs very smooth and basicly no log at all.
Almost everything works better compared to the orginal 2.3.3 stock rom I used before.
Few things I noticed, the battery life seems to be somewhat worse.
Also a question about the multitasking in ICS. I cant find a way to open the thumbnails? Long pressing home doesnt seem to work and since theres no software based keys (which I think is a good thing) I'm not sure what to do.
Tab P1000 and I'm using the latest kerned (30.1) with bt fix and rom.
Click to expand...
Click to collapse
dude undervolt your settings using voltage control for better battery im getting the same battery which i used to get in gingerbread

ronak.super said:
in build prop set
setprop persist.tablet.hidehome 0
setprop persist.tablet.hiderecent 0
setprop persist.tablet.hideback 0
Click to expand...
Click to collapse
Sorry for the noob question...but how do you access that?

build.prop file /system/buil.prop
Sent from my HTC Desire using XDA App

Medikay said:
Sorry for the noob question...but how do you access that?
Click to expand...
Click to collapse
use root explorer go to system and then hold the build.prop and open in text editor
hit thanks

Hi all, this thread is a good idea, it mostly works on the galaxy s 2 cm9 forum but their are still idiots posting in the development area. Codeworx (the developer on s2 cm9 thread) has really bought into it and tells people to post in the discussion thread if they post noob stuff in the dev thread. If the devs here (cdesai, humberOS etc) buy into this discussion thread then maybe more people will use it
Anyways, i tried changing lcd density to 120 to check out more tablet apps on the market but when I do the keyboard zooms and I can only see half of it, so I can't type properly... Any ideas?
Sent from my GT-I9100 using Tapatalk

biffroy said:
Hi all, this thread is a good idea, it mostly works on the galaxy s 2 cm9 forum but their are still idiots posting in the development area. Codeworx (the developer on s2 cm9 thread) has really bought into it and tells people to post in the discussion thread if they post noob stuff in the dev thread. If the devs here (cdesai, humberOS etc) buy into this discussion thread then maybe more people will use it
Anyways, i tried changing lcd density to 120 to check out more tablet apps on the market but when I do the keyboard zooms and I can only see half of it, so I can't type properly... Any ideas?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
set density to 160 it works fine becoz in 120 it becomes damn small and same the market page bcomes small when oriented horizontal

ronak.super said:
set density to 160 it works fine becoz in 120 it becomes damn small
Click to expand...
Click to collapse
I know that I used the honeycomb alpha at 120 and liked it that small. But my question isn't about the best density to have, it's about the keyboard at 120 and if anyone knows how to fix it or has any suggestions.
This is my GalaxyTab. There are many like it but this one is mine.
If, by some kind of freak occurrence I helped you, please hit THANKS!

my keyboard work fine on 120 check the attachment

It would be awsome if there is such way to force apps to start in tablet UI with 160 LCD density coz 120 is very small for 7" displays

CM9 on P1000
Hey guys, I tried to flash the latest ICS build for the P1000, but my tablet wont leave the start up screen...
I downloaded both files, replaced the kernel part of the zip with the one specific for the P1000, wiped cache, davik and reset user settings.
Then I flashed the zip file, but at reboot it won't leave the start up screen.
Any idea on what I may have done wrong?
Thanks!

[DISCONTINUED][ROM] [CM10/10.1] [OaTLnT] [Mar. 17/June 08, 2013]

First, Happy and Safe Holidays to all.
Next, find below the links to my most recent kang'd, lightened, and tweaked JB ROM with working sound, mic, video, and camera; albeit with the camera images rotated 90 degrees per usual (at least in the camera app I use). Please note that this ROM does not require the expanded system partition achievable with ACMEInstaller3; I still have ~60MB left after flashing this and the accompanying lightened GApps. I flash these with the latest TWRP and have the latest moboot installed. Hope these work as well for you as they do for me, but it goes without saying YMMV!
Finally, I've been focusing most of my ROM development efforts on the new Nexus 4, so updates to this, if any, may be far and few between, and only triggered by major problems or a major update to JB. Still, at this stage I feel our beloved TP's have aged extremely well thanks to the entire AOSP and CM communities and specifically to the likes of Green, Dalingrin, JC Sullins, Dorregaray, etc. who have and continue to make this all possible. So without further ado...
CM10.0
Happy St. Paddy's Day ROM: http://www.mediafire.com/?98p8x56gpw82yid
MD5: 97236e3e6b4b4b2c64343eac45d3bb08
GApps: http://www.mediafire.com/download.php?trv74s64iodi71c
MD5: 1cefddbe11033c7b2f3763097c96d5b6

O.a.T. said:
First, Happy and Safe Holidays to all.
Next, find below the links to my most recent kang'd, lightened, and tweaked JB ROM with working sound, mic, video, and camera; albeit with the camera images rotated 90 degrees per usual (at least in the camera app I use). Please note that this ROM does not require the expanded system partition achievable with ACMEInstaller3; I still have ~60MB left after flashing this and the accompanying lightened GApps. I flash these with the latest TWRP and have the latest moboot installed. Hope these work as well for you as they do for me, but it goes without saying YMMV!
Finally, I've been focusing most of my ROM development efforts on the new Nexus 4, so updates to this, if any, may be far and few between, and only triggered by major problems or a major update to JB. Still, at this stage I feel our beloved TP's have aged extremely well thanks to the entire AOSP and CM communities and specifically to the likes of Green, Dalingrin, JC Sullins, Dorregaray, etc. who have and continue to make this all possible. So without further ado...
ROM: http://www.mediafire.com/download.php?vntt5p8eccborhe
MD5: daaf58bcac7738df86965c317418fdb8
GApps: http://www.mediafire.com/download.php?trv74s64iodi71c
MD5: 1cefddbe11033c7b2f3763097c96d5b6
Click to expand...
Click to collapse
awesome, great to see you back, even if its only for this once. Thank you, Merry Christmas!

Thanks a million for all you have done.
Sent from my cm_tenderloin using XDA Premium HD app

thanks o.a.t i was wondering how long i'd have to keep your secret

O.a.T. said:
First, Happy and Safe Holidays to all.
Next, find below the links to my most recent kang'd, lightened, and tweaked JB ROM with working sound, mic, video, and camera; albeit with the camera images rotated 90 degrees per usual (at least in the camera app I use). Please note that this ROM does not require the expanded system partition achievable with ACMEInstaller3; I still have ~60MB left after flashing this and the accompanying lightened GApps. I flash these with the latest TWRP and have the latest moboot installed. Hope these work as well for you as they do for me, but it goes without saying YMMV!
Finally, I've been focusing most of my ROM development efforts on the new Nexus 4, so updates to this, if any, may be far and few between, and only triggered by major problems or a major update to JB. Still, at this stage I feel our beloved TP's have aged extremely well thanks to the entire AOSP and CM communities and specifically to the likes of Green, Dalingrin, JC Sullins, Dorregaray, etc. who have and continue to make this all possible. So without further ado...
ROM: http://www.mediafire.com/download.php?vntt5p8eccborhe
MD5: daaf58bcac7738df86965c317418fdb8
GApps: http://www.mediafire.com/download.php?trv74s64iodi71c
MD5: 1cefddbe11033c7b2f3763097c96d5b6
Click to expand...
Click to collapse
Happy Holidays OaT, so great to have you back!.....how's the battery life?? Lol...just kidding OaT.....

Haven't flashed anything on HP Touchpad since the first ICS release or so. Seems a lot has changed and I'm finding it hard to find the info needed. With these downloads waht exactly do I need to do? I have CWM recovery, but you mentioned TWRP I believe. Step by step instaling would be appreciated or if someone could point me to them. Haven't used the ACME installer in forever so I'd rather not brick it
Thanks in advance! And Merry Christmas and Happy Holidays!

Installed after installing TWRP and did a full wipe. It's been sitting at the android highlighting boot logo for 10 minutes easy. Any ideas?

Seanbest said:
Installed after installing TWRP and did a full wipe. It's been sitting at the android highlighting boot logo for 10 minutes easy. Any ideas?
Click to expand...
Click to collapse
What Rom were you running before hand ? Are see the same logo you used to see or is a new one?

New logo. I was on AOKP before. I rebooted it and tried restarting again. It sat at the logo again. I again tried to go back to recovery, now the unit wont even power on.

Seanbest said:
New logo. I was on AOKP before. I rebooted it and tried restarting again. It sat at the logo again. I again tried to go back to recovery, now the unit wont even power on.
Click to expand...
Click to collapse
Sorry I can't help , I was hoping that it had deleted the old ulimage and was trying to boot into that.
You could try sticking it on charge and then booting into recovery to install the backup I hope u made or webos to check what ulimages are in your boot folder in case that is to full.
Sent from my cm_tenderloin using Tapatalk 2

If i can get it to power on I could try that lol

that was nice surprise from oat. happy holidays

shah_vm said:
that was nice surprise from oat. happy holidays
Click to expand...
Click to collapse
Indeed. This finally gave me the motivation to try JB. Thanks so much!

asiliat said:
Indeed. This finally gave me the motivation to try JB. Thanks so much!
Click to expand...
Click to collapse
same here, thanks OATs

Got my Touchpad reset so gonna try again.

Seanbest said:
Got my Touchpad reset so gonna try again.
Click to expand...
Click to collapse
What did you do to reset it please ?

Noticed a camera app wasnt inluded, downloaded one and it opens but shows black screen like camera isnt connecting
Everthing else seems to be working smoothly
edit: nvm camera works, i just had to "take" a picture first to get rid of the initial black screen

In jb the camera is now merged into the gallery application.
Sent from my GT-N7000 using xda premium

eyeb said:
Noticed a camera app wasnt inluded, downloaded one and it opens but shows black screen like camera isnt connecting
Everthing else seems to be working smoothly
edit: nvm camera works, i just had to "take" a picture first to get rid of the initial black screen
Click to expand...
Click to collapse
What is or do you have a link for nvm camera .
Thanks

Did a clean install (webos doctor, format usb).
Keyboard stops with an error.
Unable to sync my boomarks with stock browser.
How can I fix it.

[PORT][WIP] Ubuntu Touch v0.1 Alpha - ONLY i9100 !!!

UBUNTU TOUCH v0.1 FOR i9100 ALPHA
KEEP IN MIND THAT THIS IS VERY VERY UNSTABLE AND MAY BRICK YOUR PHONE IF YOU'RE DOING SOMETHING WRONG!​
This one has been build by @ bluefa1con so all the champagne & beer bottles goes to him. Is the same build as mines! I decided to release my version when I have most of the bugs fixed. HERE IS STILL PRESENT THE CHOPPY TEXT BUG! We think is caused by hardware-composition, we don't know right now.
Let's get started. First of all, WIPE YOUR DEVICE & FORMAT /SYSTEM, /CACHE, /PRELOAD! Then:
1. Download this build of Ubuntu Touch: http://cdimage.ubuntu.com/ubuntu-to...c-demo/quantal-preinstalled-phablet-armhf.zip
2. The both files from here: http://goo.im/devs/bluefa1con/ubuntutouch
3. Copy them to your internal / external memory. Note that dual-boot is not yet supported!
4. Wipe everything you can.
5. Install CM10.1 zip - DON'T REBOOT!
6. Flash quantal(...).zip file - AGAIN, DON'T REBOOT!
7. Finally, flash hdpi_overlay.zip and then you can reboot safely.
8. Enjoy!
Report any bugs here!
So far it looks stable over the UI. Perfomances are not so great because both of us we can't manage to get working all the 2-cores. HW acceleration is disabled because is very buggy also the audio. Wifi works, cellular + 3G also. It is not very useful right now but as far as this will get more and more updates, it will be very cool .
Note: DO NOT FLASH IT INTO OTHER VARIANTS OF i9100!
Thanks, I'll keep you updated.

djmitza222 said:
UBUNTU TOUCH v0.1 FOR i9100 ALPHA
KEEP IN MIND THAT THIS IS VERY VERY UNSTABLE AND MAY BRICK YOUR PHONE IF YOU'RE DOING SOMETHING WRONG!​
Dear fellas,
Right now I'm doing a very beta test of my own build for Ubuntu Touch. So far it looks stable over the UI. Perfomances are not so great because I can't manage to get working all the 2-cores. HW acceleration is disabled because is very buggy also the audio. Wifi works, cellular + 3G also. It is not very useful right now but as far as this will get more and more updates, it will be very cool .
As soon as I finish with the final testing, I will upload the 3 ZIP files. Until that, prepare your phone and make a full BACKUP!
Note: I suggest to try it in dual-boot as I do and DO NOT FLASH IT INTO OTHER VARIANTS OF i9100!
Thanks, I'll keep you updated.
Click to expand...
Click to collapse
waiting for it will give it a try

Eagerly waiting

AW: [PORT][WIP] Ubuntu Touch v0.1 Alpha - ONLY i9100 !!!
I thought dual boot is not possible
Or is is with android and Ubuntu?
Gesendet von meinem GT-I9100 mit Tapatalk 2

reserved

Any news on developement?

Good luck and hope all goes well. Look forward to giving it a go.
Sent from my GT-I9100 using xda premium

Good game mate :good:

Just a general question will ubuntu for phone switch to the desktop mode automatically as soon as it is docked to a monitor or does this have to be enabled on a phone by phone basis?

There is released Ubuntu touch for i9100 http://forum.xda-developers.com/showthread.php?t=2079080&page=16
But he doesn't wrote whta's working and what's not

Will Try it when more stable ;P

Can I dualboot it as 2nd ROM along with Dorimanx and lastest RootBox?

Ramazor said:
Can I dualboot it as 2nd ROM along with Dorimanx and lastest RootBox?
Click to expand...
Click to collapse
latest rootbox is based on cm10.1??..if it is u can't dual boot it

No, Ubuntu requires specific kernel options. Until kernelbuilders are including these into their builds it won't work

Bubble-be said:
No, Ubuntu requires specific kernel options. Until kernelbuilders are including these into their builds it won't work
Click to expand...
Click to collapse
but the op recommanded to use it as a second rom

jeetBLswami said:
but the op recommanded to use it as a second rom
Click to expand...
Click to collapse
That's why I'm asking.

Ramazor said:
That's why I'm asking.
Click to expand...
Click to collapse
AFAIK...dual boot will not be functional ..
bubble-be is right the kernel for Ubuntu touch requires some special properties

FYI guys, I have tested it only as a second rom (like boot2gecko). I test it right now as a primary rom and I have problems with the text as well. I don't really know what is happening but the screen looks like there are some ''dead'' pixels. You cannot read the entire text. I tried different kernel entries but no success, also wiped cache / dalvik cache. Let me see how fast can I fix it.
PS: try bluefa1con's build. Mine is not so far from it.
@bluefa1con, let me know if I can post your build on the first post w/ full credits to you. It take some time to make another build right now but I'm uploading the current images on zippyshare.
EDIT: audio fixed but choppy sound!

djmitza222 said:
FYI guys, I have tested it only as a second rom (like boot2gecko). I test it right now as a primary rom and I have problems with the text as well. I don't really know what is happening but the screen looks like there are some ''dead'' pixels. You cannot read the entire text. I tried different kernel entries but no success, also wiped cache / dalvik cache. Let me see how fast can I fix it.
PS: try bluefa1con's build. Mine is not so far from it.
@bluefa1con, let me know if I can post your build on the first post w/ full credits to you. It take some time to make another build right now but I'm uploading the current images on zippyshare.
EDIT: audio fixed but choppy sound!
Click to expand...
Click to collapse
Sure link my builds
I don't mind just did it for fun
Graphic corruption is the radical I didn't release my builds I had it done since morning
Graphic corruption is due to our broken hwc I think plus ubuntu doesn't fully support our ril
Sent from my GT-I9100 using Tapatalk 2

reserved

FirefoxOS ported to Samsung Galaxy S2 (JellyBean 4.3)

I've finally opened the new official thread for this port:
http://forum.xda-developers.com/showthread.php?t=2612940
Thanks!
Hi,
I've been working on supporting GT-I9100 for FirefoxOS with JellyBean 4.3. This is going to be the near-future for next FirefoxOS releases so thanks to the previous work done by CyanogenMod on porting this device to JB4.3, I could ported it to FirefoxOS.
I don't have "privileges" to create a new thread on i9100 development forum and announce there all the work I've done, so in the meantime I thought that someone here could be interested in testing it and helping
Right now, the only way to have an image and installing it on you device is building it by yourself, just follow these instructions: plus.google.com/117885749590235128300/posts/cH2qU1hcLEC
I'm working on providing a precompiled image installable via CWM and hope to have those precompiled images for the weekend so stay tunned
Thanks!
Click to expand...
Click to collapse

Hello,
I've currently no time to try compiling (and i had to uninstall my linux recently...) But I will definitely keep an eye on this thread and be happy to test when you succeed to provide a precompiled image (or when I get a little time to compile it myself)
That might be a silly question but is there any chance that it works white other aosp based rom like Paranoid Android ?
Thanks for your work !

papemor said:
Hello,
I've currently no time to try compiling (and i had to uninstall my linux recently...) But I will definitely keep an eye on this thread and be happy to test when you succeed to provide a precompiled image (or when I get a little time to compile it myself)
That might be a silly question but is there any chance that it works white other aosp based rom like Paranoid Android ?
Thanks for your work !
Click to expand...
Click to collapse
Well, the dual boot can be extended to add other ROMs easily but it will take a lot of time to test them all so for now I'd stick with Cyanogenmod 10.2. Anyway, all my work is shared via github.com/atilag so any collaboration will be appreciated
I already provided a CWM installable .zip that you can find here: https : //mega.co.nz/#!0NUwEAxK!AQXMXzjmkQRiMvn6auQEEkN3sL8eOn0GFFXSRyXzdvE
Enjoy!!

ROM question
_AtilA_ said:
Well, the dual boot can be extended to add other ROMs easily but it will take a lot of time to test them all so for now I'd stick with Cyanogenmod 10.2. Anyway, all my work is shared via github.com/atilag so any collaboration will be appreciated
I already provided a CWM installable .zip that you can find here: https : //mega.co.nz/#!0NUwEAxK!AQXMXzjmkQRiMvn6auQEEkN3sL8eOn0GFFXSRyXzdvE
Enjoy!!
Click to expand...
Click to collapse
Can you tell us what are the steps for installing this rom? Flash it via CWM? Is this a dual boot rom will it have JB in it, or do you have to flash it on top of JB? What features are functioning in Firefox? Calls, sms, WIFI?

alien4friend said:
Can you tell us what are the steps for installing this rom? Flash it via CWM? Is this a dual boot rom will it have JB in it, or do you have to flash it on top of JB? What features are functioning in Firefox? Calls, sms, WIFI?
Click to expand...
Click to collapse
Yes, this is a CWM installable .zip.
It is dual-boot in case you have installed CM10.2 on it. If you don't, you won't be able to dual-boot.
I wanted to reach the necessary post count to create an official thread on developers forums fot this port, so I just used this one as a preview... this is the reason cause there's no much more information about the port in this thread
Anyway, visit the link to my G+ post and you will have further instructions, I cannot post links yet, so build it yoursefl: plus.google.com/117885749590235128300/posts/cH2qU1hcLEC
What doesn't work:
* Graphic issues (some laggy)
* No mobile-data (it connects to 3G/HSDP networks but don't transmit data)
* No Camera
* No Bluetooth
I'm working on building a new version these days, so a new release would be available soon.

Wifi works? Just making sure, great work!
Sent from my Nexus 5 using XDA Premium 4 mobile app

Not in i777 (i don't have the driver), but works fine in i9100
LeJolly said:
Wifi works? Just making sure, great work!
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse

Will this rom be ported to the i9100g?
Sent from my GT-I9100G using xda app-developers app

how to boot back into android
Hi Juan,
First of all thanks for the effort of porting Firefox to SGS2, I have successfully installed the zip file that you have posted and I have booted into Firefox. Like you mentioned no mobile data, no camera, no bluetooth. Voice call function ok. I have not managed to connect to a wireless yet. Can you tell me how to boot into android instead of firefox? I have installed the zip on top om CM 10.2 so dual boot should work.

alien4friend said:
Hi Juan,
First of all thanks for the effort of porting Firefox to SGS2, I have successfully installed the zip file that you have posted and I have booted into Firefox. Like you mentioned no mobile data, no camera, no bluetooth. Voice call function ok. I have not managed to connect to a wireless yet. Can you tell me how to boot into android instead of firefox? I have installed the zip on top om CM 10.2 so dual boot should work.
Click to expand...
Click to collapse
Hi, first of all, I opened a new ROM thread (and thus the official) for this port: http://forum.xda-developers.com/showthread.php?t=2612940
If you want to boot into CM10.2, you have to use adb this way:
adb shell cr.sh 1
This will reboot the phone in this very moment, and will boot into CM10.2.

skyrocket
I can't write on the official thread yet, you know how that is. Curious if anyone has tried the i727 skyrocket yet and what results. Thanks in advance.

thank
thank you

[ROM] Evervolv | 4.0.0p1 [AOSP 4.4.4] [3.4 kernel] [Nightlies] With /data/media

For those that don't know what evervolv is, Evervolv is an AOSP (Android Open Source Project) rom. We're fully open sourced and encourage it with no restrictions. The work put into this rom is community driven and and Evervolv Project is made up of numerous members and contributors.
Right now the current source we are working on is KITKAT(Android 4.4.4).
Current version: 4.0.0p1
Current Items not working/Buggy
Updated 4-4-14
Bluetooth working --Still a WIP as some devices don't connect
Camera working --Still a WIP as the camcorder records in blue and a few minor issues
home key doesn't turn device on need to use power button--FIXED in the next nightly should be 4-5-2014
Battery draw around 50mA in sleep
Some experience SOD when hotword detect is active
Location service has stopped with Googles update looking into now
You tell me what you find.
4G Models are not currently supported
Click to expand...
Click to collapse
Evervolv Github: https://github.com/Evervolv
Evervolv Gerrit: http://review.evervolv.com/
Evervolv website: http://www.evervolv.com/
(New Site is up Check it out)
Evervolv Bug Tracker: http://bugs.evervolv.com/
(Please have discretion when reporting issues, and be descriptive / helpful. Also understand that we'll have some growing pains with this. So don't expect everything to be perfect.)
Twitter: https://www.twitter.com/wbellavance
IRC: #evervolv
Click to expand...
Click to collapse
[GPL Compliance]
Kernel Source
Click to expand...
Click to collapse
[Download]
If you already have evervolv installed you should see this build under testing if you refresh and can download that way.
No more nightlies Moved to 5.0 Lollipop
ev_tenderloin-1-23-15 Last and final for 4.0 -> Fix netflix
FLINTMAN-TWRP-touch-data_media-SELINUX-2.7.1.0-6-7-2014.zip
--This is a flashing TWRP recovery with data/media and SELINUX support. I have tested 100% of the features and everything is working great as far as i can tell. Soo
with that being said. Use at your own risk 8). Make sure you save a backup from your current recovery just in case. BACKUP BACKUP BACKUP
--Broke Vibration as i updated kernel.
Click to expand...
Click to collapse
NOTE: Recommend a clean install if moving from a previous version and or another ROM.
Flashing from cm or any other ROM will require a clean install, dirty flashes can cause random reboots and random errors
[Disclaimer]
I am not responsible for bricked devices, lost data, etc, etc. You all know the drill. BACKUP BACKUP BACKUP
Click to expand...
Click to collapse
[Special Thanks]
i would like to thank Flemmard, Jcsullins, Dorregaray, Invisiblek, Milaq, and anyone else that helped to make this happen. More great work to come.
Mitchbaria --for a 4g model to start in on this
Colchiro-- For a spare Touchpad WIFI to be able to test on one and develop at the same time
Click to expand...
Click to collapse

GAPPS
---These are the gapps i use. You should be able to use any that are KitKat compatible
http://forum.xda-developers.com/showthread.php?t=2397942
Grabbing logcats and dmesg along with last_klog.
These are helpful in figuring out what is going on
Install the sdk in you PC http://developer.android.com/sdk/index.html
Logcat
"adb shell logcat >logcat.txt"
This will run until unplugged or ctrl c and all the content will go into that file
dmesg
"adb shell cat proc/kmsg >dmesg.txt"
This will run until unplugged or ctrl c and all the content will go into that file
Last_klog
"adb shell cat proc/last_klog >lastklog.txt"
This is for if you have a reboot run this right after the device starts back up and it will get me the last dmesg from before it reboot and will help determine the cause of the reboot.
This will help me and everyone that uses this ROM as i can determine the cause of issues.
Thanks

Thank you for the continued HP Touchpad Development and support Flintman.
Cheers:highfive:
Touchpad Toolbox By Jcsullins
[ROM GUIDE]How to use the TouchPad Toolbox to install Android "The Super Easy Way"
[GAPPS][4.4.x/4.3.x] OFFICIAL 0-Day PA-GOOGLE APPS (Use Mini or Micro packages)

Thanks to both of you. For the roms and the video walk thru. I haven't tried art on the touchpad because it actually makes my Galaxy Nexus slower most of the time. And with some gapps it's even worse. Since it isn't listed as broken I am assuming you have tried it. If I may ask. What gapps did you use and what was performance like? It prevented my nexus from booting at times. Just wanna stick with what you have tried until I get use to the new data media and such. Thanks again.

Moody66 said:
Thanks to both of you. For the roms and the video walk thru. I haven't tried art on the touchpad because it actually makes my Galaxy Nexus slower most of the time. And with some gapps it's even worse. Since it isn't listed as broken I am assuming you have tried it. If I may ask. What gapps did you use and what was performance like? It prevented my nexus from booting at times. Just wanna stick with what you have tried until I get use to the new data media and such. Thanks again.
Click to expand...
Click to collapse
I haven't tested as its still a wip from Google. I do have it as broken in the op. But good to know that it boots 8)
Sent from my SCH-I545 using xda app-developers app

Added another build see OP for what was changed. I also adding in a touch recovery TWRP with data/media and SELINUX support. This will also allow you access to your webOS media folder which is know in the new build as external_sd. I have tested out all the features and everything is working great but please save a full backup from your previous recovery if you decide to use this recovery as it's still in an Alpha state.
Enjoy

flintman said:
Added another build see OP for what was changed. I also adding in a touch recovery TWRP with data/media and SELINUX support. This will also allow you access to your webOS media folder which is know in the new build as external_sd. I have tested out all the features and everything is working great but please save a full backup from your previous recovery if you decide to use this recovery as it's still in an Alpha state.
Enjoy
Click to expand...
Click to collapse
Thanks a lot for this amazing ROM and the recovery I had few bug with the reboot ... The recovery freezed and i have to manually reboot to unfreeze it ... A part from that great job Can't wait to see what you are going to bring next
And just one little request ... I love having the clock center on the status bar ... Do you think you can add it to the Evervolv project ? That's would be a great feature

Lyok0ne said:
Thanks a lot for this amazing ROM and the recovery I had few bug with the reboot ... The recovery freezed and i have to manually reboot to unfreeze it ... A part from that great job Can't wait to see what you are going to bring next
And just one little request ... I love having the clock center on the status bar ... Do you think you can add it to the Evervolv project ? That's would be a great feature
Click to expand...
Click to collapse
I have flashed with this recovery about 20 times now and only got the reboot to hang once. I'm looking into it.

Lyok0ne said:
Thanks a lot for this amazing ROM and the recovery I had few bug with the reboot ... The recovery freezed and i have to manually reboot to unfreeze it ... A part from that great job Can't wait to see what you are going to bring next
And just one little request ... I love having the clock center on the status bar ... Do you think you can add it to the Evervolv project ? That's would be a great feature
Click to expand...
Click to collapse
install xposed + gravitybox. it works like a charm and has this feature and many others.
Sent from my Nexus 4 using Tapatalk

Okay, I am doing something wrong. I have downloaded the recovery multiple times from multiple devices. I have tried installing via TWRP and manually extracting the image to /boot.
Each attempt, I get:
Checking uImage... Invalid Size
BOOT FAILED!
Please SELECT to continue
Any thoughts? I can still load my backup copy of TWRP without issue.
Update:
After purging the other copies of TWRP from /boot, the new version loads without issue. Thanks flintman!

Discovered that the TP 4G not compatible with the test 3.X Kernel yet
Hey Flintman just wanted to point out my findings after going crazy over the past couple weeks trying to figure what I was doing wrong when flashing the test Kit Kat ROMs w/3.X kernel.
Previously my TP 4G was working fine on shumash's SCHIZOID 4.2.2 ROM but I was extremely eager to try out the new 3.X kernels. I first tried out your non-data/media Evervolv 4.0.0p1 version and was unable to connect to WiFi despite repeated clean install methods and variations of cache wipes. I know that I had re-sized partitions with Tailor sufficiently for Kit Kat as warned so I then attempted to try out Invisblek's CM11 ROM. Not only was WiFi still not wanting to toggle on, but the rotation sensor was acting oppositely for landscape orientations and I was getting frequent crashing reboots just going through the UI. I then decided to try out JCSullins' updated CM10.1 ROM with his 3.0 kernel and then encountered the same behavior as Invisblek's CM11 ROM, but with even worse random touch driver issues that resulted in erratic automatic screen touches and ultimately soft-reboots.
Restoring a backup to SCHIZOID's 4.2.2 ROM worked fine to restore all functionality, but I couldn't help but think that I was still doing something wrong.
I got a hold of a normal TP (WiFi only model) and tried your latest 1-10-2014 Evervolv 4.0.0p1 ROM and was amazed to see that it was working great including WiFi (although 5GHz APs don't seem to scan as reliably as the past kernel) aside from the known issues. I tried the exact same install process on my TP 4G again just to see if anything changed, but unfortunately WiFi still wouldn't toggle and the orientation sensor behavior exhibited the same opposite landscape behavior as Invisiblek and JCSullins' ROMs.
I had thought that aside from the 3G HSPA modem in the TP 4G model chipset-wise it would be identical to the WiFi-only model so kernel 3.X developments would be complimentary across all TP devices. Unfortunately this doesn't appear to be the case and I hope with time you guys are able to work out any compatibility with the 4G model to benefit from the already terrific development that's going on with the 3.X kernel now.
I admire your guys' skills and look forward to all the improvements in store!
PS: I'd be more than happy to beta test anything you guys feel would address any compatibility issues on the TP 4G!

If we flash your twrp will it remove cwm or add another entry? I've never been able to have two recoveries working. I would much rather not have to use the power button and what not all the time in cwm but want to make sure I'm covered if something goes wrong. Thanks
Sent from my TouchPad using Tapatalk

Due to the limit of the boot directory it will remove all recoveries before installing this one.
Sent from my SCH-I545 using xda app-developers app

Sorry for the Nube question I've searched and I'm sure it's been answered already....
So I got my touchpad with ClockworkMod Recovery version 6.0.1.9 can I flash the TWRP SE data/media recovery from there? Trying with the acme installer 5ET has failed.
I do have the original 4.4 Evervolv up and running and my partitions have been updated.
Thanks
Steve

SteveoSupremo said:
Sorry for the Nube question I've searched and I'm sure it's been answered already....
So I got my touchpad with ClockworkMod Recovery version 6.0.1.9 can I flash the TWRP SE data/media recovery from there? Trying with the acme installer 5ET has failed.
I do have the original 4.4 Evervolv up and running and my partitions have been updated.
Thanks
Steve
Click to expand...
Click to collapse
So I replaced the ulimage in the boot directory and was able to install the 1/10/14 rom. So I guess I needed to search and just try a little more.
anyway -- I think it's a little slower than the first 4.4 version.... Maybe I need to reboot.... thoughts?
steve

Both using same cpu settings? Although with more things implemented it could seem slower.
---------- Post added at 01:11 AM ---------- Previous post was at 01:07 AM ----------
emph4tic said:
Hey Flintman just wanted to point out my findings after going crazy over the past couple weeks trying to figure what I was doing wrong when flashing the test Kit Kat ROMs w/3.X kernel.
Previously my TP 4G was working fine on shumash's SCHIZOID 4.2.2 ROM but I was extremely eager to try out the new 3.X kernels. I first tried out your non-data/media Evervolv 4.0.0p1 version and was unable to connect to WiFi despite repeated clean install methods and variations of cache wipes. I know that I had re-sized partitions with Tailor sufficiently for Kit Kat as warned so I then attempted to try out Invisblek's CM11 ROM. Not only was WiFi still not wanting to toggle on, but the rotation sensor was acting oppositely for landscape orientations and I was getting frequent crashing reboots just going through the UI. I then decided to try out JCSullins' updated CM10.1 ROM with his 3.0 kernel and then encountered the same behavior as Invisblek's CM11 ROM, but with even worse random touch driver issues that resulted in erratic automatic screen touches and ultimately soft-reboots.
Restoring a backup to SCHIZOID's 4.2.2 ROM worked fine to restore all functionality, but I couldn't help but think that I was still doing something wrong.
I got a hold of a normal TP (WiFi only model) and tried your latest 1-10-2014 Evervolv 4.0.0p1 ROM and was amazed to see that it was working great including WiFi (although 5GHz APs don't seem to scan as reliably as the past kernel) aside from the known issues. I tried the exact same install process on my TP 4G again just to see if anything changed, but unfortunately WiFi still wouldn't toggle and the orientation sensor behavior exhibited the same opposite landscape behavior as Invisiblek and JCSullins' ROMs.
I had thought that aside from the 3G HSPA modem in the TP 4G model chipset-wise it would be identical to the WiFi-only model so kernel 3.X developments would be complimentary across all TP devices. Unfortunately this doesn't appear to be the case and I hope with time you guys are able to work out any compatibility with the 4G model to benefit from the already terrific development that's going on with the 3.X kernel now.
I admire your guys' skills and look forward to all the improvements in store!
PS: I'd be more than happy to beta test anything you guys feel would address any compatibility issues on the TP 4G!
Click to expand...
Click to collapse
I am curious. Have you tried turning the 4g off. Like airplane mode then just turning wifi back on? Was thinking of getting one of these models to tinker with.

Moody66 said:
Both using same cpu settings? Although with more things implemented it could seem slower.
---------- Post added at 01:11 AM ---------- Previous post was at 01:07 AM ----------
Click to expand...
Click to collapse
I think it was because of sync.... it's running smooth now. after I loaded a different set of GAPPS.
Now I have to figure out the camera apk. it would help if I RTFM.... Thanks Flintman for the awesome update!

Which version of gapps is recommended for 01-10-14 version?

New Test build up which fixes vibration

emph4tic said:
Hey Flintman just wanted to point out my findings after going crazy over the past couple weeks trying to figure what I was doing wrong when flashing the test Kit Kat ROMs w/3.X kernel.
Previously my TP 4G was working fine on shumash's SCHIZOID 4.2.2 ROM but I was extremely eager to try out the new 3.X kernels. I first tried out your non-data/media Evervolv 4.0.0p1 version and was unable to connect to WiFi despite repeated clean install methods and variations of cache wipes. I know that I had re-sized partitions with Tailor sufficiently for Kit Kat as warned so I then attempted to try out Invisblek's CM11 ROM. Not only was WiFi still not wanting to toggle on, but the rotation sensor was acting oppositely for landscape orientations and I was getting frequent crashing reboots just going through the UI. I then decided to try out JCSullins' updated CM10.1 ROM with his 3.0 kernel and then encountered the same behavior as Invisblek's CM11 ROM, but with even worse random touch driver issues that resulted in erratic automatic screen touches and ultimately soft-reboots.
Restoring a backup to SCHIZOID's 4.2.2 ROM worked fine to restore all functionality, but I couldn't help but think that I was still doing something wrong.
I got a hold of a normal TP (WiFi only model) and tried your latest 1-10-2014 Evervolv 4.0.0p1 ROM and was amazed to see that it was working great including WiFi (although 5GHz APs don't seem to scan as reliably as the past kernel) aside from the known issues. I tried the exact same install process on my TP 4G again just to see if anything changed, but unfortunately WiFi still wouldn't toggle and the orientation sensor behavior exhibited the same opposite landscape behavior as Invisiblek and JCSullins' ROMs.
I had thought that aside from the 3G HSPA modem in the TP 4G model chipset-wise it would be identical to the WiFi-only model so kernel 3.X developments would be complimentary across all TP devices. Unfortunately this doesn't appear to be the case and I hope with time you guys are able to work out any compatibility with the 4G model to benefit from the already terrific development that's going on with the 3.X kernel now.
I admire your guys' skills and look forward to all the improvements in store!
PS: I'd be more than happy to beta test anything you guys feel would address any compatibility issues on the TP 4G!
Click to expand...
Click to collapse
Do you think you can get me some dmesg and logcats??