First, Happy and Safe Holidays to all.
Next, find below the links to my most recent kang'd, lightened, and tweaked JB ROM with working sound, mic, video, and camera; albeit with the camera images rotated 90 degrees per usual (at least in the camera app I use). Please note that this ROM does not require the expanded system partition achievable with ACMEInstaller3; I still have ~60MB left after flashing this and the accompanying lightened GApps. I flash these with the latest TWRP and have the latest moboot installed. Hope these work as well for you as they do for me, but it goes without saying YMMV!
Finally, I've been focusing most of my ROM development efforts on the new Nexus 4, so updates to this, if any, may be far and few between, and only triggered by major problems or a major update to JB. Still, at this stage I feel our beloved TP's have aged extremely well thanks to the entire AOSP and CM communities and specifically to the likes of Green, Dalingrin, JC Sullins, Dorregaray, etc. who have and continue to make this all possible. So without further ado...
CM10.0
Happy St. Paddy's Day ROM: http://www.mediafire.com/?98p8x56gpw82yid
MD5: 97236e3e6b4b4b2c64343eac45d3bb08
GApps: http://www.mediafire.com/download.php?trv74s64iodi71c
MD5: 1cefddbe11033c7b2f3763097c96d5b6
O.a.T. said:
First, Happy and Safe Holidays to all.
Next, find below the links to my most recent kang'd, lightened, and tweaked JB ROM with working sound, mic, video, and camera; albeit with the camera images rotated 90 degrees per usual (at least in the camera app I use). Please note that this ROM does not require the expanded system partition achievable with ACMEInstaller3; I still have ~60MB left after flashing this and the accompanying lightened GApps. I flash these with the latest TWRP and have the latest moboot installed. Hope these work as well for you as they do for me, but it goes without saying YMMV!
Finally, I've been focusing most of my ROM development efforts on the new Nexus 4, so updates to this, if any, may be far and few between, and only triggered by major problems or a major update to JB. Still, at this stage I feel our beloved TP's have aged extremely well thanks to the entire AOSP and CM communities and specifically to the likes of Green, Dalingrin, JC Sullins, Dorregaray, etc. who have and continue to make this all possible. So without further ado...
ROM: http://www.mediafire.com/download.php?vntt5p8eccborhe
MD5: daaf58bcac7738df86965c317418fdb8
GApps: http://www.mediafire.com/download.php?trv74s64iodi71c
MD5: 1cefddbe11033c7b2f3763097c96d5b6
Click to expand...
Click to collapse
awesome, great to see you back, even if its only for this once. Thank you, Merry Christmas!
Thanks a million for all you have done.
Sent from my cm_tenderloin using XDA Premium HD app
thanks o.a.t i was wondering how long i'd have to keep your secret
O.a.T. said:
First, Happy and Safe Holidays to all.
Next, find below the links to my most recent kang'd, lightened, and tweaked JB ROM with working sound, mic, video, and camera; albeit with the camera images rotated 90 degrees per usual (at least in the camera app I use). Please note that this ROM does not require the expanded system partition achievable with ACMEInstaller3; I still have ~60MB left after flashing this and the accompanying lightened GApps. I flash these with the latest TWRP and have the latest moboot installed. Hope these work as well for you as they do for me, but it goes without saying YMMV!
Finally, I've been focusing most of my ROM development efforts on the new Nexus 4, so updates to this, if any, may be far and few between, and only triggered by major problems or a major update to JB. Still, at this stage I feel our beloved TP's have aged extremely well thanks to the entire AOSP and CM communities and specifically to the likes of Green, Dalingrin, JC Sullins, Dorregaray, etc. who have and continue to make this all possible. So without further ado...
ROM: http://www.mediafire.com/download.php?vntt5p8eccborhe
MD5: daaf58bcac7738df86965c317418fdb8
GApps: http://www.mediafire.com/download.php?trv74s64iodi71c
MD5: 1cefddbe11033c7b2f3763097c96d5b6
Click to expand...
Click to collapse
Happy Holidays OaT, so great to have you back!.....how's the battery life?? Lol...just kidding OaT.....
Haven't flashed anything on HP Touchpad since the first ICS release or so. Seems a lot has changed and I'm finding it hard to find the info needed. With these downloads waht exactly do I need to do? I have CWM recovery, but you mentioned TWRP I believe. Step by step instaling would be appreciated or if someone could point me to them. Haven't used the ACME installer in forever so I'd rather not brick it
Thanks in advance! And Merry Christmas and Happy Holidays!
Installed after installing TWRP and did a full wipe. It's been sitting at the android highlighting boot logo for 10 minutes easy. Any ideas?
Seanbest said:
Installed after installing TWRP and did a full wipe. It's been sitting at the android highlighting boot logo for 10 minutes easy. Any ideas?
Click to expand...
Click to collapse
What Rom were you running before hand ? Are see the same logo you used to see or is a new one?
New logo. I was on AOKP before. I rebooted it and tried restarting again. It sat at the logo again. I again tried to go back to recovery, now the unit wont even power on.
Seanbest said:
New logo. I was on AOKP before. I rebooted it and tried restarting again. It sat at the logo again. I again tried to go back to recovery, now the unit wont even power on.
Click to expand...
Click to collapse
Sorry I can't help , I was hoping that it had deleted the old ulimage and was trying to boot into that.
You could try sticking it on charge and then booting into recovery to install the backup I hope u made or webos to check what ulimages are in your boot folder in case that is to full.
Sent from my cm_tenderloin using Tapatalk 2
If i can get it to power on I could try that lol
that was nice surprise from oat. happy holidays
shah_vm said:
that was nice surprise from oat. happy holidays
Click to expand...
Click to collapse
Indeed. This finally gave me the motivation to try JB. Thanks so much!
asiliat said:
Indeed. This finally gave me the motivation to try JB. Thanks so much!
Click to expand...
Click to collapse
same here, thanks OATs
Got my Touchpad reset so gonna try again.
Seanbest said:
Got my Touchpad reset so gonna try again.
Click to expand...
Click to collapse
What did you do to reset it please ?
Noticed a camera app wasnt inluded, downloaded one and it opens but shows black screen like camera isnt connecting
Everthing else seems to be working smoothly
edit: nvm camera works, i just had to "take" a picture first to get rid of the initial black screen
In jb the camera is now merged into the gallery application.
Sent from my GT-N7000 using xda premium
eyeb said:
Noticed a camera app wasnt inluded, downloaded one and it opens but shows black screen like camera isnt connecting
Everthing else seems to be working smoothly
edit: nvm camera works, i just had to "take" a picture first to get rid of the initial black screen
Click to expand...
Click to collapse
What is or do you have a link for nvm camera .
Thanks
Did a clean install (webos doctor, format usb).
Keyboard stops with an error.
Unable to sync my boomarks with stock browser.
How can I fix it.
Related
Hi everybody,
I made a bloatware-free stock Froyo ROM based on B158 which includes overclocked kernel from hiapk-forums.
It's rooted. Nothing special at all but may be useful for ppl who just got their new phone delivered. This ROM will wipe your /cust_data + /data +/system. So use at your own risk and backup important data first (NANDROID).
Everything works as expected.
Credits: stockwell, Huawei, GoAPK, Koush, CM-Team and anyone else whom I forgot.
Download + detailed Instructions
Will probably buy the phone tomorrow just to fool around with it, really appreciated what you did there!
On a side question: the bootloader is not locked on this device or is it?
how much OC?
pb_1996 said:
how much OC?
Click to expand...
Click to collapse
the oc kernel from hiapk is at 1056MHz max..
i m gonna try this
so far working good , waiting for something like CM6 or 7
not so good sorry to say..
ibnefahim said:
so far working good , waiting for something like CM6 or 7
Click to expand...
Click to collapse
Me too, hopefully we will see CM7 in the near future..
OK so its in Chinese with no setup, and no Market, so this is a good start but not a complete rom at all. I will go back to the 135 build untill one that comes out that actually is complete and not just one page of apps. Very Very important for me to have Market etc etc..
M..
Works great after changing language and installing happened from cwm. Thanks
Sent from my u8800 using XDA App
mattbee said:
OK so its in Chinese with no setup, and no Market, so this is a good start but not a complete rom at all. I will go back to the 135 build untill one that comes out that actually is complete and not just one page of apps. Very Very important for me to have Market etc etc..
M..
Click to expand...
Click to collapse
I just flashed this rom, and tho it did start with chinese characters somehow it changed to english...dunno how that happened as another poster said he installed a language pack, but mine did so automatically.
as far as the market etc is concerned you need to download the gapps zip using the link the original poster provided. It is an older version of the market and i'm not too sure how to update it...being fairly new to the smartphone scene would anyone care to share???
thanks dibb
you will have to install GAPPS from CyanogenMod Wiki as stated in the original thread (see link on 1st post). Afterwards most GAPPS will update themselves once you are online or use market
getting force close android.process.acore
what i think i did
full wipe
flashed the b158
booted phone and turned off mobile data and set up wifi
booted back into recovery
mounted /system
installed gapps.zip
booted back into phone
signed into google
restored titanium backup
all was good for about 5 mins then constant force closes so bad it was a mission to power off. I full wiped again and reflashed but it happened again??? So for round 3 i am not gonna use titanium but manually download all my apps again and see what happens.
can anyone suggest where the problem may be??
Doubt
Hi everyone, i'm wonder if with this room my Huawei will be unlocked, because my phone it's unavailable for use it with other company, and i don't know how to unlock it. Your room seems pretty good, congrats!!
Hello people,
I was looking through the nightly builds on download.cyanogenmod.com
I saw a fresh build for TF101 dated for 2/27.
Check it out. I will flash it and see how it is.
Someone also needs to create an Official CM9 Nightly page in Dev section.
So who wants to be the Guinea pig? I'm already running that KANG that was posted up earlier this weekend. I may try it after I charge up.
yea...guinea pig here....goes through boot animation and then system ui and trebuchet (the launcher) fc...i would say stay away until some official announcement is made
Yeah. It doesn't even boot up probably. :-(... going back to stock
Sent from my Galaxy Nexus using XDA App
You have to start somewhere.
Now at least we have an official CM9 branch, which means someone is working on it
brzgw said:
Hello people,
I was looking through the nightly builds on download.cyanogenmod.com
I saw a fresh build for TF101 dated for 2/27.
Check it out. I will flash it and see how it is.
Someone also needs to create an Official CM9 Nightly page in Dev section.
Click to expand...
Click to collapse
ehm where from?
Edit: http://download.cyanogenmod.com/?device=tf101
Found IT ^_^
I got launcher force closes when i had an overclocked kernel with a stock rom. Gonna check this out a little later.
Sent from my Transformer TF101 using Tapatalk
I'm surprised that this news seems to be not generating much buzz here. Not knocking any of the other devs, because most of them do amazing work, but CM is the bee's knees. When those nightlies get semi-mature, I'll be running them and never look back. They've never done me wrong before. Any device I've ever had that was supported, was the best ROM available for my needs. YMMV, of course.
I think when its own thread is created youll see the buzz, cm rocks lol
Sent from my R800i using xda premium
I tried flashing it and got the same fc, the system ui and launcher. I tried it again but formatted system this time. Got the same results but was able to see the clock and tablet reboot options.
Guess it's not ready yet
shadrach47 said:
I tried flashing it and got the same fc, the system ui and launcher. I tried it again but formatted system this time. Got the same results but was able to see the clock and tablet reboot options.
Guess it's not ready yet
Click to expand...
Click to collapse
Yep, same here, even with wipe dalvik and fix permissions, FC´s :S
Let us wait for a new update....
Alas, I ran across this on get.cm also. Got excited and then had the FC issues like everyone else. At least it is a step in the right direction.
Don´t know if its related,
lost my wifi hability after trying this, anyone else?
it just won´t turn on :S
Was just about to try flashing it until I saw how many people were unsuccessful. Oh well, guess I'll wait until an official release.
ferreinf said:
Don´t know if its related,
lost my wifi hability after trying this, anyone else?
it just won´t turn on :S
Click to expand...
Click to collapse
Not sure if it's related or not but my wifi on a Kanged version of CM9 is acting weird, disconnecting and saying out of range.
I tried this one first but it could just be the ROM I'm on.
shadrach47 said:
Not sure if it's related or not but my wifi on a Kanged version of CM9 is acting weird, disconnecting and saying out of range.
I tried this one first but it could just be the ROM I'm on.
Click to expand...
Click to collapse
Ok got it to work again, had to use Super Wipe Lite from http://forum.xda-developers.com/showthread.php?t=1245892
after running the script flashed latest revolver and got wifi backup....
Same here, will try your suggestion below.
Edit: Had to run the wipe zip, reflash and boot into current rom and the restore a backup to get it working again. PITA But it works.
ferreinf said:
Don´t know if its related,
lost my wifi hability after trying this, anyone else?
it just won´t turn on :S
Click to expand...
Click to collapse
CM rocks
lollazzo said:
CM rocks
Click to expand...
Click to collapse
i would like to see MIUI V4 on tab, as it will be easier to port than 2.x was ^_^
New official CM9 nightly on get.cm. It boots!!! Gonna test it and report back in a bit.
EDIT1: Wifi works and was able to log into my Google account. Currently restoring my Titanium Backup and will test a bit more after that. Also, camera makes the tablet reboot on first launch, but works after that. Odd. More info to come.
EDIT2: Face unlock is there, but doesn't recognize my face, so I can't test it out. It couldn't recognize my face on my Nexus S 4G either. Maybe my face is just derped up. Anyway, there is nothing that I could tell that is broken. Even the MicroSD mounted with no issue. I don't have a keyboard dock to test it out, otherwise I would. Games and videos both work fine.
Here is a build of the ParanoidAndroid 1.6a for Tenderloin compiled with a working Preview 8 camera:
NOTE:See this thread for information on the ParanoidAndroid ROM: ParanoidAndroid 1.6a for Tenderloin before you ask questions already answered.
ROM Download: Google Docs Download
GAPPS fixed: gapps fixed direct link
See this thread for information on the CM9 camera build: Unofficial CM9 with working camera
CREDIT: All credit for the camera goes to Dorregaray, whose easy instructions allowed me to build this, and who is the only person in the world who had the perseverance, skill, and knowledge to get it to work.
Nice!
Sent from my SAMSUNG-SGH-T989 using xda premium
ref : [ROM][EXPERIMENTAL]Unofficial ParanoidAndroid with working camera
op's I see the info above..
Love to try it... What CM9 nightly is the build, too, also kernel info.
Please, include some scene shot! Art work
I never take the plunge without seeing the dress first! ha ha ha
bill-da-kid said:
ref : [ROM][EXPERIMENTAL]Unofficial ParanoidAndroid with working camera
op's I see the info above..
Love to try it... What CM9 nightly is the build, too, also kernel info.
Please, include some scene shot! Art work
I never take the plunge without seeing the dress first! ha ha ha
Click to expand...
Click to collapse
Read the OP for the referenced stable build. It's the same with a working camera, and buggy as an anthill.
Sent from my aokp_tenderloin using XDA Premium App
PA Working Camera Build Updated
Updated build available in OP. The anthill moved, but a few bugs remain.
shumash said:
Updated build available in OP. The anthill moved, but a few bugs remain.
Click to expand...
Click to collapse
Nice job getting the new preview 8 out so quickly.
Mike T
Non-Experimental PA with Preview 8 Camera
I've been using this ROM as my daily driver, and it appears stable enough to have the EXPERIMENTAL tag removed. It still has some bugs that relate to the camera itself, but the only BSOD that I have had has been on the initial flashing of the ROM. It has worked stably after that. The only bugs relate to specific camera apps from the Playstore. Some work, some don't. Some crash the camera, most don't. Wifi was initially a problem, but it's fixed with Preview 8 to the point that I haven't had any problems. I think that subject to the usual caveats about using any unofficial ROM, that you can be fairly confident in flashing and using this one.
Why does power just reset the from? That alone made this unusable...
buzz86us said:
Why does power just reset the from? That alone made this unusable...
Click to expand...
Click to collapse
Read the OP for the stable ParanoidAndroid ROM w/o the camera. It's actually a "feature" which is really useful when you make changes to scripts, add stuff into init.d, etc. and just want to reboot without going through lights out and moboot. Just download any of the suggested software power menu apps on Playstore, and the problem is solved.
This just killed my backup touchpad, hah. Was using the AOKP&CM9 Remix by SGA prior to this and was totally fine with it. Wanted to test this out and nope. At first it wouldn't boot into WebOS, then decided to boot into Android only for it to shut down during camera testing and never turn on again.
emeraldlight said:
This just killed my backup touchpad, hah. Was using the AOKP&CM9 Remix by SGA prior to this and was totally fine with it. Wanted to test this out and nope. At first it wouldn't boot into WebOS, then decided to boot into Android only for it to shut down during camera testing and never turn on again.
Click to expand...
Click to collapse
How is that even possible?! Have you tried all button combo's yet...
emeraldlight said:
This just killed my backup touchpad, hah. Was using the AOKP&CM9 Remix by SGA prior to this and was totally fine with it. Wanted to test this out and nope. At first it wouldn't boot into WebOS, then decided to boot into Android only for it to shut down during camera testing and never turn on again.
Click to expand...
Click to collapse
I would suggest putting your problem into its own thread, perhaps some of the great people at XDA would see it better that way. :good:
Soooo tempted. But I'm in love with cm10!
lotherius said:
Soooo tempted. But I'm in love with cm10!
Click to expand...
Click to collapse
Don't blame you, but I am still using this as my daily driver because: a) I can set up individual dpi for each of my apps, including the launcher, and b) the camera works almost perfectly, especially if you use UCAM in place of the standard camera app.
emeraldlight said:
This just killed my backup touchpad, hah. Was using the AOKP&CM9 Remix by SGA prior to this and was totally fine with it. Wanted to test this out and nope. At first it wouldn't boot into WebOS, then decided to boot into Android only for it to shut down during camera testing and never turn on again.
Click to expand...
Click to collapse
While the last thing you did before a crash is the most likely place to look, I doubt that this ROM "killed your backup touchpad". When you installed the PA ROM, did you select "CyanogenMod" at the moboot startup, or did you try to boot it through AOKP? Keep in mind that _SGA_ has a script that modifies /boot and the default moboot image during flash. PA doesn't. From your description of the problem, there's insufficient information to determine exactly what you did, the steps you took, and what caused the crash, but the fact that you were able to boot up to the point that you were testing the camera suggests that the ROM installed fine.
issue
I like this from, but I am missing left side buttons at lower bar. can you help?
Rom download link won't download.
It says the "The file exceeds the maximum size that we scan. Download anyway", but when I click on "Download Anyway" the page just cycles and it doesn't download.
I've seen that page before on Google Drive downloads, but it usually allows a download when I encounter it.
EDIT: Tried it again later, now it works.
How to Shut Down or Restart
Am I missing on how to shut the touchpad down?
When I press the power button it just goes into the starting "paranoid android" animation and comes back on...
EDIT: N/m on second thought... just nevermind.
jurajdrobec said:
I like this from, but I am missing left side buttons at lower bar. can you help?
Click to expand...
Click to collapse
lazypc said:
Am I missing on how to shut the touchpad down?
When I press the power button it just goes into the starting "paranoid android" animation and comes back on...
Click to expand...
Click to collapse
The answer to both questions is in the OP for the non-camera build here: ParanoidAndroid 1.6a for Tenderloin, User Notes/Bugs
New Thread
http://forum.xda-developers.com/showthread.php?t=2016114
mic2012 said:
Paranoid Android for SGH-I757M thanks to Socim
PA2.99 22NOV2012 for i757m
http://d-h.st/users/Space/?fld_id=7675#files
Needs wipe data before upgrading from cm10. Sorry guys, I don't own an i757m so haven't tested it.
Click to expand...
Click to collapse
Was this rom built using the paranoid android port guide?
......
Definitely a HUGE thanks to Socim!! The Paranoid rom is working really well on my phone. Only 1 reboot during initial setup with an up time of 45h. Very stable.
Thread needs to be retitled look at cm9 or Cm10 thread title for format. If not following proper thread title etiquette for custom roms we may get locked by mod.
Screenshots are a big + for rom thread, list of features.
List of working and non working elements of the rom with current release. Ensure this remains updated with each build.
Thanks
Sent from my SGH-I757M using Tapatalk 2
I have just transferred my data to new hard disk and it cost me two days.
Hopefully new build will be uploaded later today. With new kernel config it should be highly stable, many thanks to dr4stic. My phone haven't met any reboot for 52hrs.
Socim said:
I have just transferred my data to new hard disk and it cost me two days.
Hopefully new build will be uploaded later today. With new kernel config it should be highly stable, many thanks to dr4stic. My phone haven't met any reboot for 52hrs.
Click to expand...
Click to collapse
Looking forward to trying it.
Sent from my SGH-I757M using xda app-developers app
Thanks for the updated ROM Socim. Just downloading and flashing now.
Quick Q - has anyone tried the Gapps version 20121011? Goo Manager informed me an update was available and I have downloaded it, but haven't flashed it yet.
4runner10 said:
Thanks for the updated ROM Socim. Just downloading and flashing now.
Quick Q - has anyone tried the Gapps version 20121011? Goo Manager informed me an update was available and I have downloaded it, but haven't flashed it yet.
Click to expand...
Click to collapse
When I had PA installed, I did the gapps update with no issues.
Sent from my SGH-I757M using xda app-developers app
I am still having some random reboot when I try to light up the screen from idle. But otherwise everything work fine and fast. ROM look amazing
Everything was great for me too... No reboots for 2 days, but what I did experience is lockups and slowdowns. I tried modifying cpu thresholds to no avail. Also had camera probs.
Really cool rom, I hope it gets support in the future to make totally stable... For now, had to revert back to 0829 cm9...stable stable land! Haha
Cheers
unclephil said:
I am still having some random reboot when I try to light up the screen from idle. But otherwise everything work fine and fast. ROM look amazing
Click to expand...
Click to collapse
Weird, I've never encountered that issue. I assume you did a complete clean install of the Paranoid rom? Maybe get cat log running and log the event if it happens, I hear that helps devs track down the issue. Are any specific apps running when these reboots occur?
been running this ROM for around 24 hours noticed around 4 or 5 random resets and am still having the issue with instagram and youtube controls being put in the background. Otherwise the build is quite reliable and very snappy, Thanks for the effort!
The reboot for me only occurs during screen unlock. I have remove the patern unclock and since then did not see any reboot. Will let you know tomorrow the result
Update: I got another reboot this morning without any lock active. Will try another fresh install to see
For those that don't know what evervolv is, Evervolv is an AOSP (Android Open Source Project) rom. We're fully open sourced and encourage it with no restrictions. The work put into this rom is community driven and and Evervolv Project is made up of numerous members and contributors.
Right now the current source we are working on is KITKAT(Android 4.4.4).
Current version: 4.0.0p1
Current Items not working/Buggy
Updated 4-4-14
Bluetooth working --Still a WIP as some devices don't connect
Camera working --Still a WIP as the camcorder records in blue and a few minor issues
home key doesn't turn device on need to use power button--FIXED in the next nightly should be 4-5-2014
Battery draw around 50mA in sleep
Some experience SOD when hotword detect is active
Location service has stopped with Googles update looking into now
You tell me what you find.
4G Models are not currently supported
Click to expand...
Click to collapse
Evervolv Github: https://github.com/Evervolv
Evervolv Gerrit: http://review.evervolv.com/
Evervolv website: http://www.evervolv.com/
(New Site is up Check it out)
Evervolv Bug Tracker: http://bugs.evervolv.com/
(Please have discretion when reporting issues, and be descriptive / helpful. Also understand that we'll have some growing pains with this. So don't expect everything to be perfect.)
Twitter: https://www.twitter.com/wbellavance
IRC: #evervolv
Click to expand...
Click to collapse
[GPL Compliance]
Kernel Source
Click to expand...
Click to collapse
[Download]
If you already have evervolv installed you should see this build under testing if you refresh and can download that way.
No more nightlies Moved to 5.0 Lollipop
ev_tenderloin-1-23-15 Last and final for 4.0 -> Fix netflix
FLINTMAN-TWRP-touch-data_media-SELINUX-2.7.1.0-6-7-2014.zip
--This is a flashing TWRP recovery with data/media and SELINUX support. I have tested 100% of the features and everything is working great as far as i can tell. Soo
with that being said. Use at your own risk 8). Make sure you save a backup from your current recovery just in case. BACKUP BACKUP BACKUP
--Broke Vibration as i updated kernel.
Click to expand...
Click to collapse
NOTE: Recommend a clean install if moving from a previous version and or another ROM.
Flashing from cm or any other ROM will require a clean install, dirty flashes can cause random reboots and random errors
[Disclaimer]
I am not responsible for bricked devices, lost data, etc, etc. You all know the drill. BACKUP BACKUP BACKUP
Click to expand...
Click to collapse
[Special Thanks]
i would like to thank Flemmard, Jcsullins, Dorregaray, Invisiblek, Milaq, and anyone else that helped to make this happen. More great work to come.
Mitchbaria --for a 4g model to start in on this
Colchiro-- For a spare Touchpad WIFI to be able to test on one and develop at the same time
Click to expand...
Click to collapse
GAPPS
---These are the gapps i use. You should be able to use any that are KitKat compatible
http://forum.xda-developers.com/showthread.php?t=2397942
Grabbing logcats and dmesg along with last_klog.
These are helpful in figuring out what is going on
Install the sdk in you PC http://developer.android.com/sdk/index.html
Logcat
"adb shell logcat >logcat.txt"
This will run until unplugged or ctrl c and all the content will go into that file
dmesg
"adb shell cat proc/kmsg >dmesg.txt"
This will run until unplugged or ctrl c and all the content will go into that file
Last_klog
"adb shell cat proc/last_klog >lastklog.txt"
This is for if you have a reboot run this right after the device starts back up and it will get me the last dmesg from before it reboot and will help determine the cause of the reboot.
This will help me and everyone that uses this ROM as i can determine the cause of issues.
Thanks
Thank you for the continued HP Touchpad Development and support Flintman.
Cheers:highfive:
Touchpad Toolbox By Jcsullins
[ROM GUIDE]How to use the TouchPad Toolbox to install Android "The Super Easy Way"
[GAPPS][4.4.x/4.3.x] OFFICIAL 0-Day PA-GOOGLE APPS (Use Mini or Micro packages)
Thanks to both of you. For the roms and the video walk thru. I haven't tried art on the touchpad because it actually makes my Galaxy Nexus slower most of the time. And with some gapps it's even worse. Since it isn't listed as broken I am assuming you have tried it. If I may ask. What gapps did you use and what was performance like? It prevented my nexus from booting at times. Just wanna stick with what you have tried until I get use to the new data media and such. Thanks again.
Moody66 said:
Thanks to both of you. For the roms and the video walk thru. I haven't tried art on the touchpad because it actually makes my Galaxy Nexus slower most of the time. And with some gapps it's even worse. Since it isn't listed as broken I am assuming you have tried it. If I may ask. What gapps did you use and what was performance like? It prevented my nexus from booting at times. Just wanna stick with what you have tried until I get use to the new data media and such. Thanks again.
Click to expand...
Click to collapse
I haven't tested as its still a wip from Google. I do have it as broken in the op. But good to know that it boots 8)
Sent from my SCH-I545 using xda app-developers app
Added another build see OP for what was changed. I also adding in a touch recovery TWRP with data/media and SELINUX support. This will also allow you access to your webOS media folder which is know in the new build as external_sd. I have tested out all the features and everything is working great but please save a full backup from your previous recovery if you decide to use this recovery as it's still in an Alpha state.
Enjoy
flintman said:
Added another build see OP for what was changed. I also adding in a touch recovery TWRP with data/media and SELINUX support. This will also allow you access to your webOS media folder which is know in the new build as external_sd. I have tested out all the features and everything is working great but please save a full backup from your previous recovery if you decide to use this recovery as it's still in an Alpha state.
Enjoy
Click to expand...
Click to collapse
Thanks a lot for this amazing ROM and the recovery I had few bug with the reboot ... The recovery freezed and i have to manually reboot to unfreeze it ... A part from that great job Can't wait to see what you are going to bring next
And just one little request ... I love having the clock center on the status bar ... Do you think you can add it to the Evervolv project ? That's would be a great feature
Lyok0ne said:
Thanks a lot for this amazing ROM and the recovery I had few bug with the reboot ... The recovery freezed and i have to manually reboot to unfreeze it ... A part from that great job Can't wait to see what you are going to bring next
And just one little request ... I love having the clock center on the status bar ... Do you think you can add it to the Evervolv project ? That's would be a great feature
Click to expand...
Click to collapse
I have flashed with this recovery about 20 times now and only got the reboot to hang once. I'm looking into it.
Lyok0ne said:
Thanks a lot for this amazing ROM and the recovery I had few bug with the reboot ... The recovery freezed and i have to manually reboot to unfreeze it ... A part from that great job Can't wait to see what you are going to bring next
And just one little request ... I love having the clock center on the status bar ... Do you think you can add it to the Evervolv project ? That's would be a great feature
Click to expand...
Click to collapse
install xposed + gravitybox. it works like a charm and has this feature and many others.
Sent from my Nexus 4 using Tapatalk
Okay, I am doing something wrong. I have downloaded the recovery multiple times from multiple devices. I have tried installing via TWRP and manually extracting the image to /boot.
Each attempt, I get:
Checking uImage... Invalid Size
BOOT FAILED!
Please SELECT to continue
Any thoughts? I can still load my backup copy of TWRP without issue.
Update:
After purging the other copies of TWRP from /boot, the new version loads without issue. Thanks flintman!
Discovered that the TP 4G not compatible with the test 3.X Kernel yet
Hey Flintman just wanted to point out my findings after going crazy over the past couple weeks trying to figure what I was doing wrong when flashing the test Kit Kat ROMs w/3.X kernel.
Previously my TP 4G was working fine on shumash's SCHIZOID 4.2.2 ROM but I was extremely eager to try out the new 3.X kernels. I first tried out your non-data/media Evervolv 4.0.0p1 version and was unable to connect to WiFi despite repeated clean install methods and variations of cache wipes. I know that I had re-sized partitions with Tailor sufficiently for Kit Kat as warned so I then attempted to try out Invisblek's CM11 ROM. Not only was WiFi still not wanting to toggle on, but the rotation sensor was acting oppositely for landscape orientations and I was getting frequent crashing reboots just going through the UI. I then decided to try out JCSullins' updated CM10.1 ROM with his 3.0 kernel and then encountered the same behavior as Invisblek's CM11 ROM, but with even worse random touch driver issues that resulted in erratic automatic screen touches and ultimately soft-reboots.
Restoring a backup to SCHIZOID's 4.2.2 ROM worked fine to restore all functionality, but I couldn't help but think that I was still doing something wrong.
I got a hold of a normal TP (WiFi only model) and tried your latest 1-10-2014 Evervolv 4.0.0p1 ROM and was amazed to see that it was working great including WiFi (although 5GHz APs don't seem to scan as reliably as the past kernel) aside from the known issues. I tried the exact same install process on my TP 4G again just to see if anything changed, but unfortunately WiFi still wouldn't toggle and the orientation sensor behavior exhibited the same opposite landscape behavior as Invisiblek and JCSullins' ROMs.
I had thought that aside from the 3G HSPA modem in the TP 4G model chipset-wise it would be identical to the WiFi-only model so kernel 3.X developments would be complimentary across all TP devices. Unfortunately this doesn't appear to be the case and I hope with time you guys are able to work out any compatibility with the 4G model to benefit from the already terrific development that's going on with the 3.X kernel now.
I admire your guys' skills and look forward to all the improvements in store!
PS: I'd be more than happy to beta test anything you guys feel would address any compatibility issues on the TP 4G!
If we flash your twrp will it remove cwm or add another entry? I've never been able to have two recoveries working. I would much rather not have to use the power button and what not all the time in cwm but want to make sure I'm covered if something goes wrong. Thanks
Sent from my TouchPad using Tapatalk
Due to the limit of the boot directory it will remove all recoveries before installing this one.
Sent from my SCH-I545 using xda app-developers app
Sorry for the Nube question I've searched and I'm sure it's been answered already....
So I got my touchpad with ClockworkMod Recovery version 6.0.1.9 can I flash the TWRP SE data/media recovery from there? Trying with the acme installer 5ET has failed.
I do have the original 4.4 Evervolv up and running and my partitions have been updated.
Thanks
Steve
SteveoSupremo said:
Sorry for the Nube question I've searched and I'm sure it's been answered already....
So I got my touchpad with ClockworkMod Recovery version 6.0.1.9 can I flash the TWRP SE data/media recovery from there? Trying with the acme installer 5ET has failed.
I do have the original 4.4 Evervolv up and running and my partitions have been updated.
Thanks
Steve
Click to expand...
Click to collapse
So I replaced the ulimage in the boot directory and was able to install the 1/10/14 rom. So I guess I needed to search and just try a little more.
anyway -- I think it's a little slower than the first 4.4 version.... Maybe I need to reboot.... thoughts?
steve
Both using same cpu settings? Although with more things implemented it could seem slower.
---------- Post added at 01:11 AM ---------- Previous post was at 01:07 AM ----------
emph4tic said:
Hey Flintman just wanted to point out my findings after going crazy over the past couple weeks trying to figure what I was doing wrong when flashing the test Kit Kat ROMs w/3.X kernel.
Previously my TP 4G was working fine on shumash's SCHIZOID 4.2.2 ROM but I was extremely eager to try out the new 3.X kernels. I first tried out your non-data/media Evervolv 4.0.0p1 version and was unable to connect to WiFi despite repeated clean install methods and variations of cache wipes. I know that I had re-sized partitions with Tailor sufficiently for Kit Kat as warned so I then attempted to try out Invisblek's CM11 ROM. Not only was WiFi still not wanting to toggle on, but the rotation sensor was acting oppositely for landscape orientations and I was getting frequent crashing reboots just going through the UI. I then decided to try out JCSullins' updated CM10.1 ROM with his 3.0 kernel and then encountered the same behavior as Invisblek's CM11 ROM, but with even worse random touch driver issues that resulted in erratic automatic screen touches and ultimately soft-reboots.
Restoring a backup to SCHIZOID's 4.2.2 ROM worked fine to restore all functionality, but I couldn't help but think that I was still doing something wrong.
I got a hold of a normal TP (WiFi only model) and tried your latest 1-10-2014 Evervolv 4.0.0p1 ROM and was amazed to see that it was working great including WiFi (although 5GHz APs don't seem to scan as reliably as the past kernel) aside from the known issues. I tried the exact same install process on my TP 4G again just to see if anything changed, but unfortunately WiFi still wouldn't toggle and the orientation sensor behavior exhibited the same opposite landscape behavior as Invisiblek and JCSullins' ROMs.
I had thought that aside from the 3G HSPA modem in the TP 4G model chipset-wise it would be identical to the WiFi-only model so kernel 3.X developments would be complimentary across all TP devices. Unfortunately this doesn't appear to be the case and I hope with time you guys are able to work out any compatibility with the 4G model to benefit from the already terrific development that's going on with the 3.X kernel now.
I admire your guys' skills and look forward to all the improvements in store!
PS: I'd be more than happy to beta test anything you guys feel would address any compatibility issues on the TP 4G!
Click to expand...
Click to collapse
I am curious. Have you tried turning the 4g off. Like airplane mode then just turning wifi back on? Was thinking of getting one of these models to tinker with.
Moody66 said:
Both using same cpu settings? Although with more things implemented it could seem slower.
---------- Post added at 01:11 AM ---------- Previous post was at 01:07 AM ----------
Click to expand...
Click to collapse
I think it was because of sync.... it's running smooth now. after I loaded a different set of GAPPS.
Now I have to figure out the camera apk. it would help if I RTFM.... Thanks Flintman for the awesome update!
Which version of gapps is recommended for 01-10-14 version?
New Test build up which fixes vibration
emph4tic said:
Hey Flintman just wanted to point out my findings after going crazy over the past couple weeks trying to figure what I was doing wrong when flashing the test Kit Kat ROMs w/3.X kernel.
Previously my TP 4G was working fine on shumash's SCHIZOID 4.2.2 ROM but I was extremely eager to try out the new 3.X kernels. I first tried out your non-data/media Evervolv 4.0.0p1 version and was unable to connect to WiFi despite repeated clean install methods and variations of cache wipes. I know that I had re-sized partitions with Tailor sufficiently for Kit Kat as warned so I then attempted to try out Invisblek's CM11 ROM. Not only was WiFi still not wanting to toggle on, but the rotation sensor was acting oppositely for landscape orientations and I was getting frequent crashing reboots just going through the UI. I then decided to try out JCSullins' updated CM10.1 ROM with his 3.0 kernel and then encountered the same behavior as Invisblek's CM11 ROM, but with even worse random touch driver issues that resulted in erratic automatic screen touches and ultimately soft-reboots.
Restoring a backup to SCHIZOID's 4.2.2 ROM worked fine to restore all functionality, but I couldn't help but think that I was still doing something wrong.
I got a hold of a normal TP (WiFi only model) and tried your latest 1-10-2014 Evervolv 4.0.0p1 ROM and was amazed to see that it was working great including WiFi (although 5GHz APs don't seem to scan as reliably as the past kernel) aside from the known issues. I tried the exact same install process on my TP 4G again just to see if anything changed, but unfortunately WiFi still wouldn't toggle and the orientation sensor behavior exhibited the same opposite landscape behavior as Invisiblek and JCSullins' ROMs.
I had thought that aside from the 3G HSPA modem in the TP 4G model chipset-wise it would be identical to the WiFi-only model so kernel 3.X developments would be complimentary across all TP devices. Unfortunately this doesn't appear to be the case and I hope with time you guys are able to work out any compatibility with the 4G model to benefit from the already terrific development that's going on with the 3.X kernel now.
I admire your guys' skills and look forward to all the improvements in store!
PS: I'd be more than happy to beta test anything you guys feel would address any compatibility issues on the TP 4G!
Click to expand...
Click to collapse
Do you think you can get me some dmesg and logcats??