UBUNTU TOUCH v0.1 FOR i9100 ALPHA
KEEP IN MIND THAT THIS IS VERY VERY UNSTABLE AND MAY BRICK YOUR PHONE IF YOU'RE DOING SOMETHING WRONG!
This one has been build by @ bluefa1con so all the champagne & beer bottles goes to him. Is the same build as mines! I decided to release my version when I have most of the bugs fixed. HERE IS STILL PRESENT THE CHOPPY TEXT BUG! We think is caused by hardware-composition, we don't know right now.
Let's get started. First of all, WIPE YOUR DEVICE & FORMAT /SYSTEM, /CACHE, /PRELOAD! Then:
1. Download this build of Ubuntu Touch: http://cdimage.ubuntu.com/ubuntu-to...c-demo/quantal-preinstalled-phablet-armhf.zip
2. The both files from here: http://goo.im/devs/bluefa1con/ubuntutouch
3. Copy them to your internal / external memory. Note that dual-boot is not yet supported!
4. Wipe everything you can.
5. Install CM10.1 zip - DON'T REBOOT!
6. Flash quantal(...).zip file - AGAIN, DON'T REBOOT!
7. Finally, flash hdpi_overlay.zip and then you can reboot safely.
8. Enjoy!
Report any bugs here!
So far it looks stable over the UI. Perfomances are not so great because both of us we can't manage to get working all the 2-cores. HW acceleration is disabled because is very buggy also the audio. Wifi works, cellular + 3G also. It is not very useful right now but as far as this will get more and more updates, it will be very cool .
Note: DO NOT FLASH IT INTO OTHER VARIANTS OF i9100!
Thanks, I'll keep you updated.
djmitza222 said:
UBUNTU TOUCH v0.1 FOR i9100 ALPHA
KEEP IN MIND THAT THIS IS VERY VERY UNSTABLE AND MAY BRICK YOUR PHONE IF YOU'RE DOING SOMETHING WRONG!
Dear fellas,
Right now I'm doing a very beta test of my own build for Ubuntu Touch. So far it looks stable over the UI. Perfomances are not so great because I can't manage to get working all the 2-cores. HW acceleration is disabled because is very buggy also the audio. Wifi works, cellular + 3G also. It is not very useful right now but as far as this will get more and more updates, it will be very cool .
As soon as I finish with the final testing, I will upload the 3 ZIP files. Until that, prepare your phone and make a full BACKUP!
Note: I suggest to try it in dual-boot as I do and DO NOT FLASH IT INTO OTHER VARIANTS OF i9100!
Thanks, I'll keep you updated.
Click to expand...
Click to collapse
waiting for it will give it a try
Eagerly waiting
AW: [PORT][WIP] Ubuntu Touch v0.1 Alpha - ONLY i9100 !!!
I thought dual boot is not possible
Or is is with android and Ubuntu?
Gesendet von meinem GT-I9100 mit Tapatalk 2
reserved
Any news on developement?
Good luck and hope all goes well. Look forward to giving it a go.
Sent from my GT-I9100 using xda premium
Good game mate :good:
Just a general question will ubuntu for phone switch to the desktop mode automatically as soon as it is docked to a monitor or does this have to be enabled on a phone by phone basis?
There is released Ubuntu touch for i9100 http://forum.xda-developers.com/showthread.php?t=2079080&page=16
But he doesn't wrote whta's working and what's not
Will Try it when more stable ;P
Can I dualboot it as 2nd ROM along with Dorimanx and lastest RootBox?
Ramazor said:
Can I dualboot it as 2nd ROM along with Dorimanx and lastest RootBox?
Click to expand...
Click to collapse
latest rootbox is based on cm10.1??..if it is u can't dual boot it
No, Ubuntu requires specific kernel options. Until kernelbuilders are including these into their builds it won't work
Bubble-be said:
No, Ubuntu requires specific kernel options. Until kernelbuilders are including these into their builds it won't work
Click to expand...
Click to collapse
but the op recommanded to use it as a second rom
jeetBLswami said:
but the op recommanded to use it as a second rom
Click to expand...
Click to collapse
That's why I'm asking.
Ramazor said:
That's why I'm asking.
Click to expand...
Click to collapse
AFAIK...dual boot will not be functional ..
bubble-be is right the kernel for Ubuntu touch requires some special properties
FYI guys, I have tested it only as a second rom (like boot2gecko). I test it right now as a primary rom and I have problems with the text as well. I don't really know what is happening but the screen looks like there are some ''dead'' pixels. You cannot read the entire text. I tried different kernel entries but no success, also wiped cache / dalvik cache. Let me see how fast can I fix it.
PS: try bluefa1con's build. Mine is not so far from it.
@bluefa1con, let me know if I can post your build on the first post w/ full credits to you. It take some time to make another build right now but I'm uploading the current images on zippyshare.
EDIT: audio fixed but choppy sound!
djmitza222 said:
FYI guys, I have tested it only as a second rom (like boot2gecko). I test it right now as a primary rom and I have problems with the text as well. I don't really know what is happening but the screen looks like there are some ''dead'' pixels. You cannot read the entire text. I tried different kernel entries but no success, also wiped cache / dalvik cache. Let me see how fast can I fix it.
PS: try bluefa1con's build. Mine is not so far from it.
@bluefa1con, let me know if I can post your build on the first post w/ full credits to you. It take some time to make another build right now but I'm uploading the current images on zippyshare.
EDIT: audio fixed but choppy sound!
Click to expand...
Click to collapse
Sure link my builds
I don't mind just did it for fun
Graphic corruption is the radical I didn't release my builds I had it done since morning
Graphic corruption is due to our broken hwc I think plus ubuntu doesn't fully support our ril
Sent from my GT-I9100 using Tapatalk 2
reserved
Related
The CM team has been working around the clock getting CM9 running on devices. I'm currently responsible for the Nexus S. Everything seems to be running great so far, and this ROM can easily be a daily driver for most enthusiasts. This thread will be updated until the build bot starts popping out nightly builds again.
IF YOU HAVE ANY BUGS, PLEASE WIPE DATA, REINSTALL OFF OF ROM MANAGER, AND SEE IF IT STILL OCCURS. I WILL NOT RESPOND TO BUGS IF YOU DO NOT INSTALL OFF ROM MANAGER OR YOU HAVE NOT WIPED DATA AND TESTED.
FOR EVERY BUG REPORT, PLEASE PUT THE FOLLOWING AT THE BOTTOM, OR I WILL IGNORE IT:
"I wiped data and installed off of ROM Manager and retested before reporting this bug."
Has only been tested on i9020A
Android zip (Alpha 11):
http://developer.clockworkmod.com/downloads/579/1424/cm_crespo-ota-eng.koush.zip
Google Apps addon:
http://download.clockworkmod.com/test/gapps-ics-20111125-2.zip
What doesn't work:
Choppy video playback.
MMS is apparently flaky.
Sources:
Kernel:
https://github.com/CyanogenMod/samsung-kernel-crespo/tree/ics
Device:
https://github.com/CyanogenMod/android_device_samsung_crespo/tree/ics
Proprietaries local_manifest.xml (use the typical gingerbread ones, but the ics branch of imgtec):
https://gist.github.com/1382062
CHangelog
Alpha 11:
Fix missing dictionaries.
Fix duplicate keyboards.
Add Google Wallet.
Alpha 10:
Fix signal strength.
Fix mounting usb storage on computers.
Alpha 9:
Fixed usb tether.
Fixed live wallpapers.
Fixed data usage stats.
Fixed data limits.
Alpha 8:
Fixed Gapps.
Fixed i9023 HOME button.
Fixed calendar sync.
Alpha 6/7:
Fixed Camcorder
Alpha 5:
Fixed tethering.
Fixed various missing apks.
Fixed missing apns.
Pinch to zoom fixed.
Alpha 3/4:
Don't use these
Alpha 2:
Fixed boot flash fail.
Alpha 1:
initial release
Have fun!
it's good to see.
Ah finally. A Koush ROM. Thanks man
Awesome thanks!!!
Sent from my Nexus S using XDA App
Can this build work with GLaDOS kernel?
Wow this is great. Thanks!
Nice build koush!
great have been waiting for this a long time!!
is it usable with the kernels working on kwiboos rom? francos and/or mathkids?
Whats the problem with the camcorder?
Which kernel is used?
I'll be happy if you got some further info for us.
thanks!
Koush said:
As the title says, I have uploaded my ICS build to ROM Manager and my website.
Android zip:
http://developer.clockworkmod.com/downloads/579/1382/full_crespo-ota-eng.koush.zip
Google Apps addon:
http://download.clockworkmod.com/test/gapps-ics-20111115-with-gmail-unsigned.zip
What doesn't work:
Camcorder
Facebook account sync, missing apps from market. I am fairly sure this is a build fingerprint issue. Can probably be resolved by using the fingerprint of the Galaxy Nexus, etc. Will need to wipe between changing fingerprints.
What may not work:
GPS (it's really ****ing cold outside, and I don't wanna go find out if GPS works )
Sources:
Kernel:
Needs PVR 1.8 and new multitouch reporting format (different patch from what is floating around on other threads).
https://github.com/CyanogenMod/samsung-kernel-crespo/tree/ics
Device:
This contains a bunch of leaked libs in the leakedlibs directory to fix audio/video/etc.
https://github.com/CyanogenMod/android_device_samsung_crespo/tree/ics
Proprietaries local_manifest.xml (use the typical gingerbread ones, but the ics branch of imgtec):
https://gist.github.com/1382062
Have fun!
Click to expand...
Click to collapse
Ahhh nice! Been waiting for this.
Koush is a hero...and a meme, too, I guess.
Thanks dude!
Sent from my Nexus S using Tapatalk
Have it flashed and it's the fastest AOSP ICS I ever tried lol
LKNim said:
Have it flashed and it's the fastest AOSP ICS I ever tried lol
Click to expand...
Click to collapse
Haha... How many AOSP ICS's have you tried?
Thanks Koush , great job as usual
LKNim said:
Have it flashed and it's the fastest AOSP ICS I ever tried lol
Click to expand...
Click to collapse
Is it more complete and faster than kwiboo's?
Sent from my Nexus S using Tapatalk
now we just need it for Nexus S 4g
i got stuck at google screen when try to boot up.
koush i have one little question: would you recommend using the kernel that comes with the rom or a custom kernel like glados/franco/..?
MYPaT said:
i got stuck at google screen when try to boot up.
Click to expand...
Click to collapse
Same here
1PATRIK said:
Haha... How many AOSP ICS's have you tried?
Click to expand...
Click to collapse
2 out of 3
CyanogenMOD 9.0 by TE4M NOW MTD!!!!!![4.0.4]
dear all,
this thread is created to seperate non development post inside the cm9 development thread and to keep it clean.
WHAT CAN BE POSTED HERE?
-Related to cm9.0
-problems during installation
-Possibilities of bugs
-All the noob questions
WHAT should not be posted?
-thanks,thank you....
-please do not report SAME BUG
-Do not report if you are downloading new release (just download it and report bugs only)
CM9.0 THREAD
http://forum.xda-developers.com/showthread.php?t=1385153
HUMBEROS UPLOAD AREA
http://www.humberos.com.br/p/android-ics.html
GREAT NOW WE HAVE OFFICIAL NIGHTLIES
GSM- http://get.cm/?device=p1
CDMA- http://get.cm/?device=p1c
PEOPLE BE CAREFUL!!!!! NOW BUILDS ARE MTD (FOR MORE INFORMATION LOOK AT POST 2)
hit thanks if i helped you
Installation guide
PEOPLE NOW BUILDS ARE MTD!! FILE SYSTEM BE CAREFULL
FOR INSTALLING MTD BUILD IT IS [MUST] COMPULSORY TO RESTOCK[ FOLLOW TILL STEP 3]
DONOT!!!!!! RESTORE ANY OTHER BUILDS ON MTD BUILDS
IF WANT TO GO BACK TO GB RESTOCK IS AGAIN NEEDED!!!
1)RESTOCK to gingerbread by following overcome method
www.teamovercome.net
2)flash the overcome kernel 4.0 to convert the system to ext4 from the above website
3)DOWNLOAD ANY ANY BUILD [OFFICIAL NIGHTLY OR SOMEONE ELSE BUILD]
4)copy the zip to tab and then reboot into recovery
5)wipe data,cache and dalvik cache
6) a) if MTD build once u flash them mtd zip it boots into mtd recovery and U HAVE TO FLASH THE ZIP AGAIN
b) if NON MTD just flash the zip
7)reboot!!!!
What doesnt work (19-04-2012-build)mtd
tv out
minors
external sd as sd-ext
gps (unconfirmed)
ums
Any chance of p1000l owners can have the TV mobile apk working? I've been trying to restore it with titanium and I have not been able to restore it.
By the way, anyone having low battery time?
Hatori28 said:
Any chance of p1000l owners can have the TV mobile apk working? I've been trying to restore it with titanium and I have not been able to restore it.
By the way, anyone having low battery time?
Click to expand...
Click to collapse
titanium backup not working on the build
The new update seems to eliminate the software keys; is there a way to reenable them?
Don t agree just wipe everything and restore user app with Tb. Works fine however i think it s a bad idea do such about system/data.
Sent from my GT-P1000 using XDA App
ronak.super said:
titanium backup not working on the build
Click to expand...
Click to collapse
If you haven't already done that, update your TB, the last version works on ICS.
I've been really enjoying this build. Thanks alot for the whole team!
UI runs very smooth and basicly no log at all.
Almost everything works better compared to the orginal 2.3.3 stock rom I used before.
Few things I noticed, the battery life seems to be somewhat worse.
Also a question about the multitasking in ICS. I cant find a way to open the thumbnails? Long pressing home doesnt seem to work and since theres no software based keys (which I think is a good thing) I'm not sure what to do.
Tab P1000 and I'm using the latest kerned (30.1) with bt fix and rom.
Medikay said:
The new update seems to eliminate the software keys; is there a way to reenable them?
Click to expand...
Click to collapse
in build prop set
setprop persist.tablet.hidehome 0
setprop persist.tablet.hiderecent 0
setprop persist.tablet.hideback 0
Graven-eof said:
I've been really enjoying this build. Thanks alot for the whole team!
UI runs very smooth and basicly no log at all.
Almost everything works better compared to the orginal 2.3.3 stock rom I used before.
Few things I noticed, the battery life seems to be somewhat worse.
Also a question about the multitasking in ICS. I cant find a way to open the thumbnails? Long pressing home doesnt seem to work and since theres no software based keys (which I think is a good thing) I'm not sure what to do.
Tab P1000 and I'm using the latest kerned (30.1) with bt fix and rom.
Click to expand...
Click to collapse
dude undervolt your settings using voltage control for better battery im getting the same battery which i used to get in gingerbread
ronak.super said:
in build prop set
setprop persist.tablet.hidehome 0
setprop persist.tablet.hiderecent 0
setprop persist.tablet.hideback 0
Click to expand...
Click to collapse
Sorry for the noob question...but how do you access that?
build.prop file /system/buil.prop
Sent from my HTC Desire using XDA App
Medikay said:
Sorry for the noob question...but how do you access that?
Click to expand...
Click to collapse
use root explorer go to system and then hold the build.prop and open in text editor
hit thanks
Hi all, this thread is a good idea, it mostly works on the galaxy s 2 cm9 forum but their are still idiots posting in the development area. Codeworx (the developer on s2 cm9 thread) has really bought into it and tells people to post in the discussion thread if they post noob stuff in the dev thread. If the devs here (cdesai, humberOS etc) buy into this discussion thread then maybe more people will use it
Anyways, i tried changing lcd density to 120 to check out more tablet apps on the market but when I do the keyboard zooms and I can only see half of it, so I can't type properly... Any ideas?
Sent from my GT-I9100 using Tapatalk
biffroy said:
Hi all, this thread is a good idea, it mostly works on the galaxy s 2 cm9 forum but their are still idiots posting in the development area. Codeworx (the developer on s2 cm9 thread) has really bought into it and tells people to post in the discussion thread if they post noob stuff in the dev thread. If the devs here (cdesai, humberOS etc) buy into this discussion thread then maybe more people will use it
Anyways, i tried changing lcd density to 120 to check out more tablet apps on the market but when I do the keyboard zooms and I can only see half of it, so I can't type properly... Any ideas?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
set density to 160 it works fine becoz in 120 it becomes damn small and same the market page bcomes small when oriented horizontal
ronak.super said:
set density to 160 it works fine becoz in 120 it becomes damn small
Click to expand...
Click to collapse
I know that I used the honeycomb alpha at 120 and liked it that small. But my question isn't about the best density to have, it's about the keyboard at 120 and if anyone knows how to fix it or has any suggestions.
This is my GalaxyTab. There are many like it but this one is mine.
If, by some kind of freak occurrence I helped you, please hit THANKS!
my keyboard work fine on 120 check the attachment
It would be awsome if there is such way to force apps to start in tablet UI with 160 LCD density coz 120 is very small for 7" displays
CM9 on P1000
Hey guys, I tried to flash the latest ICS build for the P1000, but my tablet wont leave the start up screen...
I downloaded both files, replaced the kernel part of the zip with the one specific for the P1000, wiped cache, davik and reset user settings.
Then I flashed the zip file, but at reboot it won't leave the start up screen.
Any idea on what I may have done wrong?
Thanks!
Current status: CM10.1 in the works and this version will not be updated.
Got started with the project in January, I'm now ready to present you my first custom ROM (and kernel) - BLECM9!
First of all - BACKUP! This is not stable for everyday use just yet.
It also includes my own kernel, based on the latest CAF source code (ics_chocolate). The kernel gets frequent updates from CAF and me. Kernel version is 3.0.8. It's not as stable in the beginning but a better choice in the long term.
It won't include Google Apps, you need to manually install gapps package, as any other CM rom is by default.
Prequisites
U8800 upgraded to 2.3
ClockworkMod Recovery v5.5.0.4, not tested in v5.0.2.7
Instructions for Installing
Download the latest version of BLECM9 (Downloads below).
Copy the package to your internal/external SD card.
Reboot to recovery.
Flash the update package.
Optional: Install Gapps package (Downloads below).
Reboot and wait. The first boot takes around 2 minutes.
Downloads
My Google Code Page
Google Apps @ goo.im
Additional Notes
Report issues.
Changelog.
No, this won't work on U8800-51 or U8800Pro.
Atmel TS users, 0.02 will not work for you. I am establishing a new driver, to make the driver standard. Please standby as this is my top priority.
Everybody, send me logs if something does not work. This kernel is under heavy development. On computer with ADB set up: "adb shell dmesg > dmesg.log" and send the dmesg.log
Major Bugs
No Atmel TS support.
RIL issues (does not detect all SIMs)
NT35510 seems to have issues when turning on the screen (confirm?)
Unstable backlight on low values.
Wifi MAC address is 00:11:22:33:44:55
No Camera.
No Bluetooth.
No FM radio.
No audio (except ringtone/alarm)
Sometimes glitchy hardware acceleration.
No sensors.
More...
Credits: Huge thanks to dzo - without the proprietary blobs from him, this would've not been possible.
This is not just a work of mine, recently another developer joined the process and we are working together.
Collaborators: asm19
Feel free to contact me and also - contribute! Links for the source code is up on my GitHub (signature).
Follow my Twitter to see my development progress.
awesome. lets try
edit: when i try to write wifi password... see attachement. i can still write password, but i can't see what i am writing. everything works good in messeges
2nd edit: common cm problem... error while searching for network
Thanks for sharing.Looks good.
Been waiting for this. I will try it asap. I'm sure it will be get better day by day. Many thanks.
First of all Thank you!
First Impressions:
Touchscreen feels really responsive.
Rom feels very fast too.
Wifi is working good.
Bugs that I've found:
Screen flickering (unstable backlight)
Can't mount SDCard.
RIL isn't working on my u8800.
Overall it looks very promising!
Logs attached.
brdnacer said:
awesome. lets try
edit: when i try to write wifi password... see attachement. i can still write password, but i can't see what i am writing. everything works good in messeges
Click to expand...
Click to collapse
Yes, It's related to HW acceleration, causing some UI glitches.
Have been waiting for this for a long time, even if can't even use it because of Amtel TS.
Keep up with this awesome work
Thanks for this!
I'm using b518 and my phone is multibooting.My phone has recovery made by VICTOR TEAM (genokolar) .This ROM can be a problem for me in terms of Multiboot?Because you writed this in changelog;
New Partition Table.
Click to expand...
Click to collapse
Thank you in advance for the answer to my question!
Best regards...
Great! Been waiting for CM9 a long time ago too... Blefish, you should post some rules as to what we should and how to post in this thread, maybe instructions on how to post specific logs and what kind of info you need. The rest of the discussion should be posted in the general section. I would really hate for this thread to become a mess like Aurora's...
Sent from my U8800
I flashed 0.02, touchscreen didn't work. Then flashed Atmel-test2, touchscreen still doesn't work. Also phone reboots randomly.
I suggest to all of you interested helping Blefish, follow him on Twitter.
For those who tried Atmel-test-2-signed.zip
Blefish @ Twitter said:
Can you try doing in Terminal: "cat /devices/i2c-0/0-004a/input/input1" Do you get any output when touching?
Click to expand...
Click to collapse
forumber2 said:
Thanks for this!
I'm using b518 and my phone is multibooting.My phone has recovery made by VICTOR TEAM (genokolar) .This ROM can be a problem for me in terms of Multiboot?Because you writed this in changelog;
Thank you in advance for the answer to my question!
Best regards...
Click to expand...
Click to collapse
No changes done yet, it works like any other ROM right now.
Blefish said:
No changes done yet, it works like any other ROM right now.
Click to expand...
Click to collapse
Thanks for your answer.
I have one more question.Can i use your bootloader with multibooting?
I will test this after I have unbricked my galaxy tab (I don't want 2 problems same time)
Sent from my U8800 using Tapatalk 2
Is a good iniciative is a belfish source code?
Thanks for the feedback.
I am currently very busy in real life, exams are coming up too. I'll see if I can release another version sometime soon, to get the base working properly.
@Belfish don´t u have stoped de dev of cm9?
---------- Post added at 05:56 PM ---------- Previous post was at 05:53 PM ----------
Blefish said:
Thanks for the feedback.
I am currently very busy in real life, exams are coming up too. I'll see if I can release another version sometime soon, to get the base working properly.
Click to expand...
Click to collapse
Can u use libs from aurora?
anjo88 said:
@Belfish don´t u have stoped de dev of cm9?
Click to expand...
Click to collapse
Noo, I'm not going to stop, just saying I am bit busy so development might not be as fast in the coming 2-3 weeks.
Blefish said:
Noo, I'm not going to stop, just saying I am bit busy so development might not be as fast in the coming 2-3 weeks.
Click to expand...
Click to collapse
ok we wait bood luck for the exames is good if u have some help! Please put a donate button in thread so we can donate u a bear u diserv!
Another bug: it does not recognize my SIM card (TMN)
Also, LOTS of graphical bugs.
For those that don't know what evervolv is, Evervolv is an AOSP (Android Open Source Project) rom. We're fully open sourced and encourage it with no restrictions. The work put into this rom is community driven and and Evervolv Project is made up of numerous members and contributors.
Right now the current source we are working on is KITKAT(Android 4.4).
Current version: 4.0.0p1
Current Items not working/Buggy
Updated 4-4-14
No Bluetooth ** FIXED WIP but a majority of items work
Camera ** FIXED WIP camcorder recordes with a blue tint
Battery draw around 50mA in sleep
You tell me what you find.
Click to expand...
Click to collapse
Evervolv Github: https://github.com/Evervolv
Evervolv Gerrit: http://review.evervolv.com/
Evervolv website: http://www.evervolv.com/
(New Site is up Check it out)
Evervolv Bug Tracker: http://bugs.evervolv.com/
(Please have discretion when reporting issues, and be descriptive / helpful. Also understand that we'll have some growing pains with this. So don't expect everything to be perfect.)
Twitter: https://www.twitter.com/wbellavance
IRC: #evervolv
Click to expand...
Click to collapse
[GPL Compliance]
Kernel Source
Click to expand...
Click to collapse
[Download]
If you already have evervolv installed you should see this build under testing if you refresh and can download that way.
05-03-2014 Test Build
-- Updates that were in the data/media build since 4-24-204 plus a few more misc fixes.
04-21-2014 Test Build
--some audio fixes for the random SOD along with adding in OTG its not 100% but working well with USB stick, keyboard, and mouse. Activate OTG before plugging in device.
Netflix 1.8.1 -- Don't upgrade Netflix to the latest if you did download here and downgrade and uncheck auto update in the Play Store this is temp until I figure out what changed again.
GAPPS
---These are the gapps i use. You should be able to use any that are KitKat compatible
http://forum.xda-developers.com/showthread.php?t=2397942
Click to expand...
Click to collapse
NOTE: Recommend a clean install if moving from a previous version and or another ROM.
Flashing from cm or any other ROM will require a clean install, dirty flashes can cause random reboots and random errors
[Disclaimer]
I am not responsible for bricked devices, lost data, etc, etc. You all know the drill.
Click to expand...
Click to collapse
[Special Thanks]
i would like to thank Flemmard, Jcsullins, Dorregaray, Invisiblek, Milaq, and anyone else that helped to make this happen. More great work to come.
Click to expand...
Click to collapse
Reserved
Awesome thx flint man! Any changes from the Nov 10 test build?
Way to go Flintman, this is great!
Sent from my Touchpad using XDA Premium HD app
flintman said:
Reserved
Click to expand...
Click to collapse
Minor for now
Sent from my SCH-I545 using xda app-developers app
You might want to change the 2nd line down in the OP to KitKat 4.4 and not Jellybean.
theechap said:
You might want to change the 2nd line down in the OP to KitKat 4.4 and not Jellybean.
Click to expand...
Click to collapse
I am using Nexus 5 and was wondering if TP will get Kitkat or not...this is awesome....will flash tonight
Anyone that had lost data can you give me some information. Which acmeinstaller version did you use? Are you still on the smaller partition or did you upgrade? Im still on the i believe it's 400mb system part and haven't upgraded to the larger partition and still yet to loose data. It also could be the way kitkat mounts the partition now. After the inital loose of data did you experience it again? I'm trying to boil this down and having issues pinpoint it as i have yet to loose anything. The more information I can gather the quicker i can fix this issue. Thanks all for testing and helping me out getting this great device updated to the latest OS.
Thanks for this ROM - I have standard partition size and CWM and had no data loss, clean installed. Running well ☺
Sent from my Touchpad using Tapatalk
I tested it briefly and came from datamedia build of 10.2. I did system wipe and install using milaq's datamedia version of CWM. I had no major problems with the install and no lost media as far as I know. Looking forward to testing it again, when it gets a little more stable.
Is everyone just using the 4.3 gapps or is there a 4.4 gapps?
SDcard files
flintman said:
Anyone that had lost data can you give me some information. Which acmeinstaller version did you use? Are you still on the smaller partition or did you upgrade? Im still on the i believe it's 400mb system part and haven't upgraded to the larger partition and still yet to loose data. It also could be the way kitkat mounts the partition now. After the inital loose of data did you experience it again? I'm trying to boil this down and having issues pinpoint it as i have yet to loose anything. The more information I can gather the quicker i can fix this issue. Thanks all for testing and helping me out getting this great device updated to the latest OS.
Click to expand...
Click to collapse
Hey Flintman,
I only lost the data just once so far, if you want I could test out a reinstall. I installed Kitkat by wiping system data and cache and flashing the Rom and gapps through recovery. I already had a 600MB partition but was monitoring the free space left. I should also note that I used CWM to advance restore my data partition from my Evervolv 4.3.1 backup. This seems to be working fine.
Because I use my tablet to test mods and games I had a lot of extra folders that disappeared. These were all added by me like, Dos Games folders about a dozen, image files, Beta apks and the Rom and gapps, that were placed in the internal memory ect. All these files vanished, however files I added that were already in system folders stayed, like music, downloads and shows. It seems to just delete things that the user added into non system or app related folders.
Thanks for letting us take this fun test drive, I was all backed up before I started
DemonicHawk said:
Is everyone just using the 4.3 gapps or is there a 4.4 gapps?
Click to expand...
Click to collapse
Here ya go. You should add that to your OP Flintman
flintman said:
Interesting on the SD card i have yet to experience it. I have a new one that will be going up soon fixed wifi but browser is broken. Firefox works though. Oh BTW still able to keep the stock partition size even with install gapps. KK Gapps i'm using from HERE. Might want to start downloading as it takes a while 8)
Click to expand...
Click to collapse
This was the info I compiled about Flintmans fantastic Test Build. I had a few notes and warnings for users, I will need to update it with a link to this new thread.
Edit: I updated the video for the newer build
Download 4.4 Kitkat Gapps here:
Notes:Low to Medium battery drain(-4mA to -30mA) h/w video, Test Build Make a Backup!, Automated Updater, Audio plays with the screen off, Camera, No Bluetooth.
Note: Windows users may need to do the following in order to attach the Touchpad with the USB cable.
1. Go into the Device manager. You will see "MTP USB Device" under portable devices.
2. Right Click it and select update driver software
3. Select Browse my computer for driver software.
4. Select Let me pick from a list of device drivers on my computer
5. Select USB Mass Storage Device then click next.
and/or
6.To transfer files to PC, turn on USB mass Storage from the USB connection notification on the Android device.
Note(Important): (This might be fixed now) Backup and transfer all your SDcard files to PC. This is a testing build and could wipe files from your SDcard data.
[Note(Important): I would recommend increasing the size of your System Partition for this build. After my install I had 398/400MB free, so Flash the 512MB zip below or use Tailor to adjust the size.
Note(Important): This is an Android Open Source Project (AOSP) rom not a CyanogenMod (CM) rom. Dirty flashing an AOSP rom over a CM rom can causes errors and rebooting issues. Always do a clean install when moving from CM to AOSP and vise versa.
Flash through recovery to change the partition size to 512MB(Gradular&codycoyote)
Flintmans Posts about the new Pre-Beta Build here:
I did a clean install with the standard CWM recovery and had no loss of data or files that i can find. I also restored my apps with TiBU and everything came back good.
The Quadrant score came in a lot lower than the first test build, 1500 (first test build was 2350). The CPU portion is what suffered the most, the other portions seemed normal. It doesn't seem slower than normal though.
I haven't found any problems with any apps.
Great job, thanks!
Sent from my Touchpad using XDA Premium HD app
Sweet, glad to see this. I think we should wait for Android 4.4.1. Which the UI will be fixed for the Nexus 10.
Sent from my Galaxy Nexus using xda app-developers app
Hey Flintman,
Would you clear up some confusion about this build. I've seen a post over in the Evervolv 4.3 thread and also over in Rootzwiki. Is this build of 4.4 a traditional build like your 4.3 build or a data-media build that is going to require the data-media version of CWM and resizing partitions like the Milaq 4.3? Thanks
nevertells2 said:
Hey Flintman,
Would you clear up some confusion about this build. I've seen a post over in the Evervolv 4.3 thread and also over in Rootzwiki. Is this build of 4.4 a traditional build like your 4.3 build or a data-media build that is going to require the data-media version of CWM and resizing partitions like the Milaq 4.3? Thanks
Click to expand...
Click to collapse
I use the normal twrp recovery. This ROM doesn't require the data-media version of cwm. I hope that answers your question.
Sent from my SCH-I545 using xda app-developers app
I want to go back to CM10.1 but everytime I flash it back bootloader defaults to evervolv despite having an option for Cyanogenmod but the bootloader fails when I select cm10.1 after flashing... I only wanted to test it out a little too unstable for a daily driver but now it seems like I am stuck on this rom
Very cool looking forward to flashing this as soon as some of the major bugs are worked out
Sent from my Nexus 4 using Tapatalk
flintman said:
Anyone that had lost data can you give me some information. Which acmeinstaller version did you use? Are you still on the smaller partition or did you upgrade? Im still on the i believe it's 400mb system part and haven't upgraded to the larger partition and still yet to loose data. It also could be the way kitkat mounts the partition now. After the inital loose of data did you experience it again? I'm trying to boil this down and having issues pinpoint it as i have yet to loose anything. The more information I can gather the quicker i can fix this issue. Thanks all for testing and helping me out getting this great device updated to the latest OS.
Click to expand...
Click to collapse
Hi,
I experienced loss of data, much like as reported another member here, I only lost the folders that were added by me, it also removed the TWRP back up folder, however folders that are the usual like Music, Download remained as they were, however, the gallery app refused to load any images.
In between the reboots, I connected the TouchPad to PC and noticed something peculiar, after the very first boot, it showed about 9GB free, the same was on TWRP too, even though my folders were all gone, and after the next reboot on being connected to PC it showed me about 17GB free.
My install method was using TWRP, system wipe and flashing the zips,
I have extended the system and data partitions using the Tailor method to 512mb and 2.5gb respectively.
For now, I am back on 4.3 but would like to be able to help test out if there are any fixes that you are trying. Once again, thanks for the all the good work on these ROMs :good:
You know I think TWRP is the cause if data loss just reading peoples experiences in this thread. CWM FTW!
Sent from my Nexus 4 using Tapatalk
This ROM is updated When there are bugs and new features.
*****[ROM][5.1.1]MIUI 7 Lollipop 5.1.1 For iRULU Victory V3*****
Introducing Pure Miui 7 Based on Android Lollipop 5.1.1
I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself
(But I am 100% sure it will work if you use my given steps)
Instructions:-
-Boot into TWRP Recovery (First take backup &then flash rom)
-Wipe Cache, Dalvik Cache, Data and System
-Flash MIUI_V7 ZIP
-Reboot to system
-no need to flash gapps
Bugs:-
recalibrate battery to stop random softboot and stop battery draining. use a app called (battery calibrate)
when updates or available :-
Flash Instruction
Download zip...look in dowload
Reboot into any Custom Recovery....look for twrp in dowload
Wipe Cache & Dalvik/ART Cache....
Flash zip....
Wipe data (not necessary)....
Reboot and Enjoy !!!!
Downloads:-
(Changes :- 1)old navigation keys replaced by lolipop nav keys
2)increased smoothness and touch sensitivity
3)added hpsa/wifispeed tweak and many more
Screenshots
- http://imgur.com/ePVudnK
- http://imgur.com/e1oigqi
- http://imgur.com/BpCWtrG
XDA:DevDB Information
*****[ROM][5.1.1]MIUI 7 Lollipop 5.1.1 For iRULU V3*****, ROM for all devices (see above for details)
Contributors
andios help
Source Code: http://bit.do/downloadromhere
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: twrp recovery and backup of data
Based On: MIUI
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2016-07-02
Current Beta Version: v1
Beta Release Date: 2016-07-06
Created 2016-07-03
Last Updated 2016-07-09
please tell me bugs for fixing and thanks to me and Nitesh Prasad and others for this rom for the irulu victory v3 it is stable not alot of features but miui8 is coming and also cm12.1
Yes I know what I said on the other V3 thread.
Will try this tonight.
THANKS for your efforts
Like how this is working for the most part,
How do I get widgets to work?
Thanks
the rom is stable every thing works and it is the same as redmi 2
kdkinc said:
Like how this is working for the most part,
How do I get widgets to work?
Thanks
Click to expand...
Click to collapse
fine no over heating nothing it is stable and if your 3g data is buffering i will give you the build prop tweak. the 3g data is patched but now fixed wifi works but offline charging is the same as redmi2 bennifits of this rom is themes share it with friend and exspect updates.:laugh:
check out my youtube channel for help and roms
andios help said:
fine no over heating nothing it is stable and if your 3g data is buffering i will give you the build prop tweak. the 3g data is patched but now fixed wifi works but offline charging is the same as redmi2 bennifits of this rom is themes share it with friend and exspect updates.:laugh:
Click to expand...
Click to collapse
cm12 or miui 8 which one you want. cm12{ as camera issue but i hope i can fix it ) (miui 8 is in beta form and only for testing not for daily use and not yet release so it is expected for installing miui 8 beta do not turn on any form of internet connection as you setup or else you will be stuck at (virifying devices) i will upload it for testing use miui 7 stable to replace and fix issues.
kdkinc said:
Like how this is working for the most part,
How do I get widgets to work?
Thanks
Click to expand...
Click to collapse
i currently running miui 8 so wait for a while until i make a video showing it and also see if it is a bug but try pinch for widgets o n home screeen
I tried what you have recommended . Widgets aren't a deal breaker .
miui 8 wow sound great!
With miui it seems to me that the screen can be made brighter or dimmer than with the V3 rom. Nice treat.
Thanks for your efforts.
the kernal is stock so all the feature will not work.
kdkinc said:
I tried what you have recommended . Widgets aren't a deal breaker .
miui 8 wow sound great!
With miui it seems to me that the screen can be made brighter or dimmer than with the V3 rom. Nice treat.
Thanks for your efforts.
Click to expand...
Click to collapse
i am asking irulu for the source code and waiting for the upload link so i can make a mashmellow rom .
kdkinc said:
Yes I know what I said on the other V3 thread.
Will try this tonight.
THANKS for your efforts
Click to expand...
Click to collapse
widgets works pinch on home screen to set widgets
tell me if you find any bugs and enable layers for az or any laiers apps
andios help said:
widgets works pinch on home screen to set widgets
tell me if you find any bugs and enable layers for az or any laiers apps
Click to expand...
Click to collapse
I can't believe I screwed that up.
Thanks
kdkinc said:
I can't believe I screwed that up.
Thanks
Click to expand...
Click to collapse
how is the rom from stock for you ? (well for me whatsapp works and games play better but the kernal is not very good just like the stock rom but any way miui is not that fast and color os is fast and v3 one hand mode is supported but wifi
and camera not working on the rom so thats why i do not upload it yet.
For me all apps seem to work fine.
Camera works though I did not do video.
I had one random reboot but even stock did that occasionally.
I don't mess with games at all .
Is 7.5 a possibility ?
Thanks
kdkinc said:
For me all apps seem to work fine.
Camera works though I did not do video.
I had one random reboot but even stock did that occasionally.
I don't mess with games at all .
Is 7.5 a possibility ?
Thanks
Click to expand...
Click to collapse
some thing is wrong with your phone i never get reboot on stock or on this rom backup your data and install the new firmware and install the recovery i give you and if you like cm12.1 well i made it today it was hard to get it on stock kernal.
andios help said:
some thing is wrong with your phone i never get reboot on stock or on this rom backup your data and install the new firmware and install the recovery i give you and if you like cm12.1 well i made it today it was hard to get it on stock kernal.
Click to expand...
Click to collapse
it took two weak to made and i finished it today boot time is 18 second instant improvements 45 second was too long to wait
andios help said:
some thing is wrong with your phone i never get reboot on stock or on this rom backup your data and install the new firmware and install the recovery i give you and if you like cm12.1 well i made it today it was hard to get it on stock kernal.
Click to expand...
Click to collapse
Kind of happy the way things are now.
Thanks for the CM offer maybe later.
CM is OK but I feel that's it's kind of bland.imho.
I'll give the recovery a try tomorrow.
Thanks
kdkinc said:
Yes I know what I said on the other V3 thread.
Will try this tonight.
THANKS for your efforts
Click to expand...
Click to collapse
i have fix all the bugs in version 2 games work fine i am plaing minecraft story mode on 720p without freeze web browser will videos without freeze.
tell your devices info . my is the usa 16gb version.
@op
You used patchrom for this rom or you used normal way to port it?
i used patch rom and normal way to fix some bugs
3lambda said:
@op
You used patchrom for this rom or you used normal way to port it?
Click to expand...
Click to collapse
just fix cm12.1 bugs
MIUI rom
Can I Flash these Miui Rom On my Moto G 3Rd Generation