I have t-mobile HTC and i just updated the SPL 1.66 to HSPL 2.08 to install MAGLDR and i also installed it successfully, but then i have this pink circle and it wont boot up,
What can i do? Please help me
Im not very good in these things lol
When you installed MAGLDR, it wiped WM. Just flash partitions for the ROM you want and flash it in recovery!
Related
hi im very confused with tread how to make w7 working on hd2
becose i allready read many times how to but still confused
what is a problem i have stock rom with spl 3.0.3 and radio 2.15.50.14
what i do i flash hspl its automaticly choose hspl 3.0.3
ok its past good but what is the probleme when i wont flash magldr i need hspl 2.0.8 if i flash magldr with my version hspl 3.0.3 it cant boot
can someone tell me which steps i can do with my stock rom and spl 3.0.3 radio 2.15.50.14
thank you sory for my english
http://forum.xda-developers.com/showthread.php?t=611433
hspl and spl 3.03 is not compatible....uninstall hspl, then downgrade your wm 6.5 rom to an older stock rom with spl 2.10 or lower.... even spl 1.42 is ok..(get the rom specific for your region)..then flash hspl and magldr
i will explaine a litle
i have stock rom with spl 3.0.3 also i have stock rom with spl 1.66
when i flash stock rom with spl 1.66 and after when i try to flash hspl 2.08 i have problem after flash hspl my htchd2 random restart and not boot sometime boot but there is some problem i can see. if i flash stock rom with spl 3.0.3 then i can flash just hspl4 with this hspl i think i cant flash w7 rom
so question is with my stock rom spl 1.66 or 3.03 how to flash hspl 2.08 and magldr 1.13 to prepare my htchd2 for w7 rom. is it posible i flash stock rom with 1.66 and directly flash hspl 2.08 or should i upgrade firt spl to2.08 and then flash hspl2.08.
thank you very much
do not try to put hspl2.08 on spl3.03....it causes errors....do a task29first, then install the official rom with 1.66spl and then install hspl 2.08 and magldr
When trying to upgrade Magldr 1.12 to 1.13 I keep getting error 266. I want to install CWM and a new ROM, but having troubles upgrading Magldr. Can CWM be installed with Magldr 1.12? I have been doing a lot of reading and followed MSKIP's instructions, but keep getting the error. Any suggestions will be greatly appreciated.
why dont you start from scratch.
task29
flash radio 2.15.50.14
flash mgldr
flash proper nand partition (so get recovery)
That's right, I forgot about Task29! Thanks
first i must say that i have a little experience with installing win 6.5 and android nand roms. I have HSPL 2.08 version and radio 2.15.50.14 version.
lately i installed a miui clk rom and it worked o.k, after a while the phone stuck and i pooled out the battery and after that the rom and the clk was wiped out.
since then i made task29 and installed the radio 2.15.... again then the clk but could not install the cwm because from some reason the pc didnt recognize the phone Through the usb port, so i've installed the magldr 1.13 and then the cmw but now it won't start up (the cwm) and it give me an error, so i decided to try and install win 6.5 again but the phone won't start up.
is anybody know what is wrong or if my phone ended its life on this plant?
my suggestion would be to download hd2 toolkit. task 29 phone then start over. flash magldr then go to maglr option for usb flasher and repartition your phone for your rom of choice. install rom zip on sd card and install
blakphoenix said:
my suggestion would be to download hd2 toolkit. task 29 phone then start over. flash magldr then go to maglr option for usb flasher and repartition your phone for your rom of choice. install rom zip on sd card and install
Click to expand...
Click to collapse
done that with the toolkit and first it didn't flash the task29(usb erorr) after some Struggles i made it but than it didn't flash the magldr Through the dft (again usb erorr) so i flashed it with ruu and than the and the rest is written above.
the toolkit isn't working and on the dft i get alot of usb and connection erorrs, but with ruu flash i dont have this erorrs.
now is it hardware or software problem?
bump!!!!!!!!!!!!!
hello, i have a hd2 leo and had nand android on it with magldr(1.13)
i had to switch rom because i wass bored of the one i had. i changed in the ad recovery my rom to another rom. i just followed all steps correctly but when i start the rom it just hangs on the rom load screen... when i try another rom they stuck at the load screen and then reboot the phone.
when i try to go in the hspl to use task29 it hangs at 0% when i try task29
when i use the usb flasher in magldr to task29 it it doesnt see its connected.
i cant go back to my default rom womo 6.5
cant start the rom
cant change eveything
please help me, and if i have a new rom how could i clean my sd card from all the files that are on it?
please help me
You don't use the usb flasher in magldr to do a task 29. You must do task 29 from bootloader (Tri-color screen. turn the device on while holding the volume - button down)
It is possible that you don't need to do a task 29 anyways though.
If you still have magldr, then keep it and don't do a task 29.
You probably just have to re-flash CWR with a different partition layout.
What nand rom did you have before, and what rom do you wish to flash now?
i tried also the tri color screen but it stucks at 0%
how do i reflash cwr with a different partition layout?
and i used all kinda roms and they all say the same
but those i tried:
http://forum.xda-developers.com/showthread.php?t=733649
http://forum.xda-developers.com/showthread.php?t=1264828
http://forum.xda-developers.com/showthread.php?t=1298188
btw i have magldr v1.13
cwm 3.0.0.5
If you don't do a "wipe data / factory reset' in cwm, the next rom rarely boots.
enter cwm and do the reset, see if it helps. The comment above about partition size is the next most common reason.
as for "hangs at 0%",,, does it say "2.08.hspl" in bootloader?
hello, i always do wipe data factory reset and also cache
it says:
Code:
pb81100 HX-BC
spl-2.08.0000 8g XE
microP(led) 0x05
MicroP(touch) 0x30
EDIT; i tried to update the tri color screen to 2.08 HSPL and now i have 2.08.Hspl
but it still doesnt work
Edit2; now i did a task29
okay, so i changed my hspl to 2.08 it was 2.0800000
i did a task29
formated my sd to fat32
i reinstalled my magldr v1.13
i reinstalled my clockwordmod 3.0.0.5
and i tried to launch a rom and it stucks to the first screen (a girl with htc on it)
then i tried another rom ofcourse i wiped all my data/factory also stucked to the first screen (nrg z energiz)
what am i supposed to do now because it just dont wanna work.
change back to winmo 6.5? and then again flash to nand?
please someone help me i updated to hspl2.08
installend stock winmo 6.5
reinstalled magldr 1.13 and clockworkmod 3.0.0.5
tried to boot a rom and still doesnt work
please help me please
pleaseee help me i m still paying for my phone pleasee help mee
iefen said:
please someone help me i updated to hspl2.08
installend stock winmo 6.5
reinstalled magldr 1.13 and clockworkmod 3.0.0.5
<----------->
tried to boot a rom and still doesnt work
please help me please
Click to expand...
Click to collapse
what did you do <-------> ? because you dont mention flashing any rom, just skipped straight from reinstalling magldr and cwm to 'tried to boot'
What partition size did you flash? what rom did you flash?
lots more details please,.
samsamuel said:
what did you do <-------> ? because you dont mention flashing any rom, just skipped straight from reinstalling magldr and cwm to 'tried to boot'
What partition size did you flash? what rom did you flash?
lots more details please,.
Click to expand...
Click to collapse
I didn't flashed anything, In the video I saw the man didn't flashed after installing cwm
Partiton no one told me about partitions so I didn't made one
hi, i have a big problem! I try to install android on my htc hd2, after it come back from guaranty. So now it has radio 2.15.50.14 and spl 3.03.0000. First of all i installed a new HSPL, in particular cotulla 3.03HSPL, than i dont flashed a new radio because i allready have a the right one 2.15.50.14.Than i did a wipe, and installed the MAGDRL, but when the installation finished the phone is still white and i cant go on the MAGDRL menù!! Why does it do in this way?? i dont really know i need of help!! Now i come back to windows, but i want android thanks
peppe893 said:
hi, i have a big problem! I try to install android on my htc hd2, after it come back from guaranty. So now it has radio 2.15.50.14 and spl 3.03.0000. First of all i installed a new HSPL, in particular cotulla 3.03HSPL, than i dont flashed a new radio because i allready have a the right one 2.15.50.14.Than i did a wipe, and installed the MAGDRL, but when the installation finished the phone is still white and i cant go on the MAGDRL menù!! Why does it do in this way?? i dont really know i need of help!! Now i come back to windows, but i want android thanks
Click to expand...
Click to collapse
1. It's MAGLDR, not MAGDRL
2. You need HSPL2.08 for MAGLDR, not 3.03
This is the way of install NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL,
1. do task29
2. install radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6(or clk)
5. Format your sd, create ext3(or ext4) partition
6. do clear cache and dalvik cache.
7. Choose your android ROM .zip file and copy it to your sdcard, load into magldr recovery and enjoy...
and this is the tools that you will need.
powerofthink said:
1. Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
2. HD2 Toolkit 4.2.0.1;
HD2 Toolkit 4.2.0.1
Click to expand...
Click to collapse
powerofthink said:
This is the way of install NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL,
1. do task29
2. install radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6(or clk)
5. Format your sd, create ext3(or ext4) partition
6. do clear cache and dalvik cache.
7. Choose your android ROM .zip file and copy it to your sdcard, load into magldr recovery and enjoy...
and this is the tools that you will need.
Click to expand...
Click to collapse
Task29 isn't necessary (usually it does nothing to help), and there's no point installing MAGLDR then installing cLK right afterwards.
so, i have normally a spl 3.03 using hspl4 can I install 2.08 HSPL doesnt brick my phone?? thanks
yes you can. "HD2 toolkit" consists HSPL3 tool. And you can install 2.08.HSPL.
thanks!!! i allready have HSPL4 so i'll use it>!! thanks
peppe893 said:
so, i have normally a spl 3.03 using hspl4 can I install 2.08 HSPL doesnt brick my phone?? thanks
Click to expand...
Click to collapse
Yeah, use HSPL4.
just curious
whats the differince in hspl3 an hspl4 i flashed hspl 4 an magldr all worked until tried partition
kept getting error cant remember something like text files missing im stumped where did go wrong
rush420 said:
whats the differince in hspl3 an hspl4 i flashed hspl 4 an magldr all worked until tried partition
kept getting error cant remember something like text files missing im stumped where did go wrong
Click to expand...
Click to collapse
AFAIK, nothing different other than the fact that HSPL4 supports flashing from stock SPL 3.03 (i.e. Stock ROM 3.14) to a HSPL version (inc. HSPL 3.03)