I have a mt3g I have ran cyan, some hero roms, and now have settled on dwang, but I have been on the verge of flashing eugene's eclair rom but he says in the instructions that "A. You must have the Danger SPL Installed 1.33.2005 or any Eng SPL above."
so ive been digging around, but am still a little blurry.
So correct me where im wrong.
1 a modded spl creates or uses less internal memory, depending on the rom?
2 it can be flashed just like a rom(through recovery)
3 you have to flash the spl, then flash a higher version of the rom that you are on right now.
so my questions are,
what are the advantages/disadvantaged?
should i flash a new spl? do i need to? will i need to?
which spl should i use?
so to flash a new spl; i am on dwang 1.13, with only a fat32 part, so if i format the card, put dwang 1.12, flash to dwang 1.12, boot into dwang, put a spl and dwang 1.13 on the card, reboot to recovery, flash the spl then flash dwang 1.13?
Thanks for the help
When trying to upgrade Magldr 1.12 to 1.13 I keep getting error 266. I want to install CWM and a new ROM, but having troubles upgrading Magldr. Can CWM be installed with Magldr 1.12? I have been doing a lot of reading and followed MSKIP's instructions, but keep getting the error. Any suggestions will be greatly appreciated.
why dont you start from scratch.
task29
flash radio 2.15.50.14
flash mgldr
flash proper nand partition (so get recovery)
That's right, I forgot about Task29! Thanks
hi, i have a big problem! I try to install android on my htc hd2, after it come back from guaranty. So now it has radio 2.15.50.14 and spl 3.03.0000. First of all i installed a new HSPL, in particular cotulla 3.03HSPL, than i dont flashed a new radio because i allready have a the right one 2.15.50.14.Than i did a wipe, and installed the MAGDRL, but when the installation finished the phone is still white and i cant go on the MAGDRL menù!! Why does it do in this way?? i dont really know i need of help!! Now i come back to windows, but i want android thanks
peppe893 said:
hi, i have a big problem! I try to install android on my htc hd2, after it come back from guaranty. So now it has radio 2.15.50.14 and spl 3.03.0000. First of all i installed a new HSPL, in particular cotulla 3.03HSPL, than i dont flashed a new radio because i allready have a the right one 2.15.50.14.Than i did a wipe, and installed the MAGDRL, but when the installation finished the phone is still white and i cant go on the MAGDRL menù!! Why does it do in this way?? i dont really know i need of help!! Now i come back to windows, but i want android thanks
Click to expand...
Click to collapse
1. It's MAGLDR, not MAGDRL
2. You need HSPL2.08 for MAGLDR, not 3.03
This is the way of install NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL,
1. do task29
2. install radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6(or clk)
5. Format your sd, create ext3(or ext4) partition
6. do clear cache and dalvik cache.
7. Choose your android ROM .zip file and copy it to your sdcard, load into magldr recovery and enjoy...
and this is the tools that you will need.
powerofthink said:
1. Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
2. HD2 Toolkit 4.2.0.1;
HD2 Toolkit 4.2.0.1
Click to expand...
Click to collapse
powerofthink said:
This is the way of install NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL,
1. do task29
2. install radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6(or clk)
5. Format your sd, create ext3(or ext4) partition
6. do clear cache and dalvik cache.
7. Choose your android ROM .zip file and copy it to your sdcard, load into magldr recovery and enjoy...
and this is the tools that you will need.
Click to expand...
Click to collapse
Task29 isn't necessary (usually it does nothing to help), and there's no point installing MAGLDR then installing cLK right afterwards.
so, i have normally a spl 3.03 using hspl4 can I install 2.08 HSPL doesnt brick my phone?? thanks
yes you can. "HD2 toolkit" consists HSPL3 tool. And you can install 2.08.HSPL.
thanks!!! i allready have HSPL4 so i'll use it>!! thanks
peppe893 said:
so, i have normally a spl 3.03 using hspl4 can I install 2.08 HSPL doesnt brick my phone?? thanks
Click to expand...
Click to collapse
Yeah, use HSPL4.
just curious
whats the differince in hspl3 an hspl4 i flashed hspl 4 an magldr all worked until tried partition
kept getting error cant remember something like text files missing im stumped where did go wrong
rush420 said:
whats the differince in hspl3 an hspl4 i flashed hspl 4 an magldr all worked until tried partition
kept getting error cant remember something like text files missing im stumped where did go wrong
Click to expand...
Click to collapse
AFAIK, nothing different other than the fact that HSPL4 supports flashing from stock SPL 3.03 (i.e. Stock ROM 3.14) to a HSPL version (inc. HSPL 3.03)
Hello to all
Nom I can flash the rom JellyBean-4.1.2-CM10 V1.3a [NativeSD] in nard on my hd2 italy
HSPL 2. spl 2.8
Radio 2.15 .50.14
magldir 1.13
* recovery from 400-5 sleepers 5.0.2.6
partition sd: fat32 ext4 14GB 2GB
When you flash the rom is always the starting of the engine logo
the rom will not boot. What should I do? Thank you.
Sorry for my English.
Giancarlo.Guarro said:
Hello to all
Nom I can flash the rom JellyBean-4.1.2-CM10 V1.3a [NativeSD] in nard on my hd2 italy
HSPL 2. spl 2.8
Radio 2.15 .50.14
magldir 1.13
* recovery from 400-5 sleepers 5.0.2.6
partition sd: fat32 ext4 14GB 2GB
When you flash the rom is always the starting of the engine logo
the rom will not boot. What should I do? Thank you.
Sorry for my English.
Click to expand...
Click to collapse
Have you set the correct boot directory? There should be a guide in the OP of the ROM's thread. Also, I don't quite understand if you have HSPL 2.08 or just SPL 2.08. Make sure you have HSPL and not just SPL.
Nigeldg said:
Have you set the correct boot directory? There should be a guide in the OP of the ROM's thread. Also, I don't quite understand if you have HSPL 2.08 or just SPL 2.08. Make sure you have HSPL and not just SPL.
Click to expand...
Click to collapse
Thank you for your response.Tu can help me find the guide, the link?
I have t-mobile HTC and i just updated the SPL 1.66 to HSPL 2.08 to install MAGLDR and i also installed it successfully, but then i have this pink circle and it wont boot up,
What can i do? Please help me
Im not very good in these things lol
When you installed MAGLDR, it wiped WM. Just flash partitions for the ROM you want and flash it in recovery!