hello, i have a hd2 leo and had nand android on it with magldr(1.13)
i had to switch rom because i wass bored of the one i had. i changed in the ad recovery my rom to another rom. i just followed all steps correctly but when i start the rom it just hangs on the rom load screen... when i try another rom they stuck at the load screen and then reboot the phone.
when i try to go in the hspl to use task29 it hangs at 0% when i try task29
when i use the usb flasher in magldr to task29 it it doesnt see its connected.
i cant go back to my default rom womo 6.5
cant start the rom
cant change eveything
please help me, and if i have a new rom how could i clean my sd card from all the files that are on it?
please help me
You don't use the usb flasher in magldr to do a task 29. You must do task 29 from bootloader (Tri-color screen. turn the device on while holding the volume - button down)
It is possible that you don't need to do a task 29 anyways though.
If you still have magldr, then keep it and don't do a task 29.
You probably just have to re-flash CWR with a different partition layout.
What nand rom did you have before, and what rom do you wish to flash now?
i tried also the tri color screen but it stucks at 0%
how do i reflash cwr with a different partition layout?
and i used all kinda roms and they all say the same
but those i tried:
http://forum.xda-developers.com/showthread.php?t=733649
http://forum.xda-developers.com/showthread.php?t=1264828
http://forum.xda-developers.com/showthread.php?t=1298188
btw i have magldr v1.13
cwm 3.0.0.5
If you don't do a "wipe data / factory reset' in cwm, the next rom rarely boots.
enter cwm and do the reset, see if it helps. The comment above about partition size is the next most common reason.
as for "hangs at 0%",,, does it say "2.08.hspl" in bootloader?
hello, i always do wipe data factory reset and also cache
it says:
Code:
pb81100 HX-BC
spl-2.08.0000 8g XE
microP(led) 0x05
MicroP(touch) 0x30
EDIT; i tried to update the tri color screen to 2.08 HSPL and now i have 2.08.Hspl
but it still doesnt work
Edit2; now i did a task29
okay, so i changed my hspl to 2.08 it was 2.0800000
i did a task29
formated my sd to fat32
i reinstalled my magldr v1.13
i reinstalled my clockwordmod 3.0.0.5
and i tried to launch a rom and it stucks to the first screen (a girl with htc on it)
then i tried another rom ofcourse i wiped all my data/factory also stucked to the first screen (nrg z energiz)
what am i supposed to do now because it just dont wanna work.
change back to winmo 6.5? and then again flash to nand?
please someone help me i updated to hspl2.08
installend stock winmo 6.5
reinstalled magldr 1.13 and clockworkmod 3.0.0.5
tried to boot a rom and still doesnt work
please help me please
pleaseee help me i m still paying for my phone pleasee help mee
iefen said:
please someone help me i updated to hspl2.08
installend stock winmo 6.5
reinstalled magldr 1.13 and clockworkmod 3.0.0.5
<----------->
tried to boot a rom and still doesnt work
please help me please
Click to expand...
Click to collapse
what did you do <-------> ? because you dont mention flashing any rom, just skipped straight from reinstalling magldr and cwm to 'tried to boot'
What partition size did you flash? what rom did you flash?
lots more details please,.
samsamuel said:
what did you do <-------> ? because you dont mention flashing any rom, just skipped straight from reinstalling magldr and cwm to 'tried to boot'
What partition size did you flash? what rom did you flash?
lots more details please,.
Click to expand...
Click to collapse
I didn't flashed anything, In the video I saw the man didn't flashed after installing cwm
Partiton no one told me about partitions so I didn't made one
Related
Hi guys
Im currently an SD user.
I want to install this via nand: http://forum.xda-developers.com/showthread.php?t=1250703
I used to use MGLDR etc, is there an easy way to install this? As i cannot find exact info. As there is stuff like CLK and clockwork recovery mod.
Can anynone provide me an easy installation method to do this?
I will really appreciated. I love Android, i dont think i want to boot via WM anymore, and im sure this will also increase the performance? Thanks!!
Have you even tried to look for everything yourself?
I mean, you should have looked for "what is cLK, MAGLDR and CWM?"After doing that little search you should have known that the easiest way to do it is through the NAND toolkit stickied in the NAND forum after (of course) choosing which bootloader you want to use
I would start here:
http://forum.xda-developers.com/showthread.php?t=1044830
If you get stuck on something, just ask and I'll see if I can help you out.
after install MGLDR 1.13, my HD2 Doesnt start
Hi,
After installing MGLDR 1.13 my HTC HD2 doesnt start, I have just the HTC screen(whit screnn with HTC in green), it's freeze no menu.... nothing at all, just the white HTC Screen
Can please some one help me
You need to install a rom... download a daf file rom for your hd2 on to your computer... unzip it... run the daf file... do all this your phone have to be plug in to your computer... in magldr... select USB flash... wait for it to say.... USB....USB. then run daf file that you just unzipped....
Or install clockwork mod recovery (install through USB flasher) with the right partition for the rom.... the rom have to be for magldr... the downloaded rom also have to be transfer to your SD... but into magldr... select ad recovery... then follow prompt... this is the best way to flash rom...
Sent from my LG-P999 using XDA App
neolan said:
Hi,
After installing MGLDR 1.13 my HTC HD2 doesnt start, I have just the HTC screen(whit screnn with HTC in green), it's freeze no menu.... nothing at all, just the white HTC Screen
Can please some one help me
Click to expand...
Click to collapse
Google or Search here how to flash HSLP to a version needed for this ROM. Be sure also having the right MAGDLR version installed after HSPL. (easier to change than SPL).
I recommend using CWM. (press long red button while booting - go 8. Recovery AD - mount USB - get .zip of ROM on SD and install from .zip)
I recommend you to make sure your SPL version and MAGLDR versions are right before continuing. Also a total wipe or SD formatting (just search here for the stickies) must be (optional) done.
The white screen comes from ? Just guess ? Did you install a ROM ?
If it were no rom flashed, it would stop at the magldr menu. If a phone goes straight to bootscreen after flashing magldr it means either the spl isn't 2.08.hspl or the radio isn't a 2.xx.50.
@neolan enter bootloader, set 2.08.hspl, re enter bootloader, flash radio 2.15.50, the phone will now start into magldr and you can proceed flashing cwm.
first i must say that i have a little experience with installing win 6.5 and android nand roms. I have HSPL 2.08 version and radio 2.15.50.14 version.
lately i installed a miui clk rom and it worked o.k, after a while the phone stuck and i pooled out the battery and after that the rom and the clk was wiped out.
since then i made task29 and installed the radio 2.15.... again then the clk but could not install the cwm because from some reason the pc didnt recognize the phone Through the usb port, so i've installed the magldr 1.13 and then the cmw but now it won't start up (the cwm) and it give me an error, so i decided to try and install win 6.5 again but the phone won't start up.
is anybody know what is wrong or if my phone ended its life on this plant?
my suggestion would be to download hd2 toolkit. task 29 phone then start over. flash magldr then go to maglr option for usb flasher and repartition your phone for your rom of choice. install rom zip on sd card and install
blakphoenix said:
my suggestion would be to download hd2 toolkit. task 29 phone then start over. flash magldr then go to maglr option for usb flasher and repartition your phone for your rom of choice. install rom zip on sd card and install
Click to expand...
Click to collapse
done that with the toolkit and first it didn't flash the task29(usb erorr) after some Struggles i made it but than it didn't flash the magldr Through the dft (again usb erorr) so i flashed it with ruu and than the and the rest is written above.
the toolkit isn't working and on the dft i get alot of usb and connection erorrs, but with ruu flash i dont have this erorrs.
now is it hardware or software problem?
bump!!!!!!!!!!!!!
Hello, I suddenly stopped booting Android from MAGLDR.
Here's a sample you have any advice on solving this problem?
http://youtu.be/Oprz1CtMmF8
Recovery and boot lasts long enough, I also tried TASK29 and other things to clean up the phone, but the result is the same, just hope it's not worn ROM
what if you try to boot recovery or the rom? have you got the "fatal hit" problem?
Windows Mobile ROM work only problem is MAGLDR
I tried all the flash and Recovery and MAGLDR not help it.
But WP7 it works so the problem must be somewhere in recovery because I was working on the phone ROM which I stopped working, so I tried it again flash but will not start, I also tried a different ROM (Sense of Eclipse), but the course is the same.
if a rom breaks and you install a different one, dont forget you need to clerar out the ext partition on teh sd card, and also teh .android folder on the fat32 partition. It could be that something is left there that is preventing the android roms from working.
go into cwm and choose wipe data/factory reset, then flash the rom, then do a wipe data/factory reset again, just to be safe.
tried everything but the boot splash it on my screen freezes and nothing will not boot.
radio? magldr needs a tmous radio, 2.15.50 for example
maybe the system partition is too small.........
I have the EU version and I have radio 2.15 flash
So I have finally boot but where the problem really do not know.
Hi,
I've got a problem.
I'm trying to install andriod on my hd2.
Everything goes well untill i start my phone for the first time.
The phone gets stuck on the boot logo of the andriod i installed.
I have tryed the foowing things:
Task29 + install magldr again + different andriod roms.
But notting is working.
I can geth in to the 3 color boot screen and in the magldr. But after i flash my phone it restarts and geth stuck on the andriod boot logo.
I have andriod on the nand. when i flash back to wm6.5 it's working again.
I hope someone have a solution because i realy want andriod on my phone.
Thanks,
Maarten
MasterMaarten said:
Hi,
I've got a problem.
I'm trying to install andriod on my hd2.
Everything goes well untill i start my phone for the first time.
The phone gets stuck on the boot logo of the andriod i installed.
I have tryed the foowing things:
Task29 + install magldr again + different andriod roms.
But notting is working.
I can geth in to the 3 color boot screen and in the magldr. But after i flash my phone it restarts and geth stuck on the andriod boot logo.
I have andriod on the nand. when i flash back to wm6.5 it's working again.
I hope someone have a solution because i realy want andriod on my phone.
Thanks,
Maarten
Click to expand...
Click to collapse
Hi,
Have you flashed ClockworkMod. If you have, is the partition size right?
Im not aware if i installed the ClockworkMod.
How do i find this out or do you have a manual?
When can if find the partition size?
If you mean the magldr partition size than this is 120 mb.
The size of my sd card is 4GB.
MasterMaarten said:
Im not aware if i installed the ClockworkMod.
How do i find this out or do you have a manual?
When can if find the partition size?
If you mean the magldr partition size than this is 120 mb.
The size of my sd card is 4GB.
Click to expand...
Click to collapse
In the MAGLDR menu, go to option 8. AD recovery. Tell me if it boots up. If it doesnt and shows an error, you donot have ClockworkMod. Check this now and we'll procede furthur
Yes i have the ClockworkMod installed.
The option "8. AD recovery" is working because this is the way how i installed the android.
- i used the option: ïnstall zip from sd card.
MasterMaarten said:
Yes i have the ClockworkMod installed.
The option "8. AD recovery" is working because this is the way how i installed the android.
- i used the option: ïnstall zip from sd card.
Click to expand...
Click to collapse
So the roms you have tried are not working. The cause maybe that you have flashed the wrong partition. Which Rom have you tried?
I have tryed the folowing roms:
Android GBLeoR6.1
Sense_2.1_Lite_1.1
Energy™ -.¸¸.·´¯ SensationXL
I found them in the folowing post:
http://forum.xda-developers.com/showthread.php?t=1336700
Don't know the diference or which one is the best.
Do you got any suggestions?
MasterMaarten said:
I have tryed the folowing roms:
Android GBLeoR6.1
Sense_2.1_Lite_1.1
Energy™ -.¸¸.·´¯ SensationXL
I found them in the folowing post:
http://forum.xda-developers.com/showthread.php?t=1336700
Don't know the diference or which one is the best.
Do you got any suggestions?
Click to expand...
Click to collapse
These roms are quite heavy. If they dont work then you probably have a 150mb partition with CWM. I suggest this rom
http://forum.xda-developers.com/showthread.php?t=769026
And before installation by "install zip from sd card" Folow these steps
1. Select "wipe date/factory rest". Wipe your phone. This will clear your internal memory NOT your sd card.
2. Select "wipe cache partition". Wipe it
3. Go to advanced > wipe dalvik cache > wipe it
4. Mount your phone using the mount feature in CWM
5. Copy the rom into the root of your sd card
6. Install it via "install zip from sd card"
7. Reboot. Allow 20 minutes MAX for boot
Tell me how it goes. Always here to help
---------- Post added at 06:30 PM ---------- Previous post was at 06:25 PM ----------
MasterMaarten said:
I have tryed the folowing roms:
Android GBLeoR6.1
Sense_2.1_Lite_1.1
Energy™ -.¸¸.·´¯ SensationXL
I found them in the folowing post:
http://forum.xda-developers.com/showthread.php?t=1336700
Don't know the diference or which one is the best.
Do you got any suggestions?
Click to expand...
Click to collapse
If you want to run these roms, U need a partition of 250 MB. You probably have less than this, thats why its not booting
Well, I did everything you sayed but after waiting a half hour it's still stuck on the andriod boot screen.
why
A wait: I will try a bigger partition.
Where can i change this? At the "HD2 Android NAND Toolkit" i asume.
MasterMaarten said:
Well, I did everything you sayed but after waiting a half hour it's still stuck on the andriod boot screen.
why
A wait: I will try a bigger partition.
Where can i change this? At the "HD2 Android NAND Toolkit" i asume.
Click to expand...
Click to collapse
Then i guesd that maybe your partition is messed up. Run task29 and do it over again. And yes partition the internal memory via NAND toolkit
Sent from my HD2 using XDA
MasterMaarten said:
Well, I did everything you sayed but after waiting a half hour it's still stuck on the andriod boot screen.
why
A wait: I will try a bigger partition.
Where can i change this? At the "HD2 Android NAND Toolkit" i asume.
Click to expand...
Click to collapse
Use whichever partition is stated in the OP of whichever ROM you're trying to use. Too small a partition means that the ROM won't boot. You can either change this via the HD2 NAND Toolkit or by downloading CWM, opening the file 'flash.cfg' with notepad, editing system ya to whatever value your ROM states it should be and flashing with DAF.exe.
Ok, I changed the partitions size to 445 MB at Magldr (in the "HD2 Android NAND Toolkit"). Flashed the Magldr again. Restart the phone so the android loads again but he is still not booting.
Flashed android again but stil no luck.
MasterMaarten said:
Ok, I changed the partitions size to 445 MB at Magldr (in the "HD2 Android NAND Toolkit"). Flashed the Magldr again. Restart the phone so the android loads again but he is still not booting.
Flashed android again but stil no luck.
Click to expand...
Click to collapse
This may seem weird but have you flashed the correct radio?
I flashed the radio a long time ago. So i don't know witch one i have installed.
If i go to the 3 color screen it shows me the folowing information:
PB81100 HX-BC
SPL-2.08.hspl 8G XE
CotullaHSPL 0x40
MasterMaarten said:
I flashed the radio a long time ago. So i don't know witch one i have installed.
If i go to the 3 color screen it shows me the folowing information:
PB81100 HX-BC
SPL-2.08.hspl 8G XE
CotullaHSPL 0x40
Click to expand...
Click to collapse
Install windows mobile 6.5. Go to settings and search for software or system information. Look for radio version. If its not booting, its probably likely you dont have the correct radio installed.
Rom version: 2.15.50.14
MasterMaarten said:
Rom version: 2.15.50.14
Click to expand...
Click to collapse
O DARN!, i thought i almost had it.....well give me time, i need to think...Dont worry someone will figure it out for you
(check 2.08.HSPL)+ Task29 + install radio rom + install magldr + install Recovery (5/200/5 etc.. it depends on your android ROM properties) + Android ROM
Radio ROM 2.15.50.14;
http://www.mediafire.com/?1th8o158r2t6dba
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
http://www.mediafire.com/?2qz0xa7xfxney47
And true Android ROM for your HTC HD2 (TMOUS or EU)
Well i already did that like 3 times. With the toolkit. The radio + task 29 + magldr + HSPL are already installed and working.
I will try the TMOUS or EU rom.
Sequence have to apply exactly that i said. and you already did it.
what is your ROM? Did you do recovery? Did you do proper partition in your sdcard like EXT3 or EXT4?
I have t-mobile HTC and i just updated the SPL 1.66 to HSPL 2.08 to install MAGLDR and i also installed it successfully, but then i have this pink circle and it wont boot up,
What can i do? Please help me
Im not very good in these things lol
When you installed MAGLDR, it wiped WM. Just flash partitions for the ROM you want and flash it in recovery!