Database Users

[Q] Can't install MAGLDR113 on my HTC HD2

Hi guys, Im a noob.
When i tried to install the ROMUpdateUtillity, it was smooth on the front part, but when it start installing, it always 0%, and after that, it pop up a error dialog... I followed every instruction in the ROMUpdateUtility. please help me.
I'm using Window 7
Window Mobile Centre 6.1
Thanks.

Go to Xda Hd2 Nand Development and at the top on the thread there will be a toolkit thread. You can search it in Google too. Toolkit is called HD2 Nand Toolkit by Ksubedi. Download the tool. And flash HSPL 2.08. Then flash Task29. Then flash MagLdr through that tool. You can set the size of the partition of MagLdr in center left.
Hit thnkx if this helped.
Sent from my HTC HD2 using XDA App

i guess u didnt change ur hspl ...change it first to 2.08 befor installing magldr

Thank guys, thank you so much

Omg guys, my HD2 can't load into the MAGLDR113 menu, it stuck at the HTC logo start up screen. it can't load into the phone too...

stucking at the htc screen means that theres a clean nand
did you task29? if yes, try to install magldr again..
follow these steps:
install hspl 4 (2.08 HSPL)
install radio 2.15.50.14 rom
Task29 (clean nand)
install magldr
install cwm
goto cwm (AD Recovery @ magldr menu)
flash rom (install zip from sd card - choose zip from sd card)
have fun
if you need to go manually into magldr menu, keep pressing phone end button while booting.
if this is just too much, just try to use a toolkit (like the nand toolkit or mine (click on banner in my signature )
hope it´ll help a bit.

I still can't figure out how to boot into the MGLDR113 menu, i tried reinstall it and try press the end call button many times when booting up. its not working... omg...
Thanks

Its works now, because i missed out the Radio installation part so it won't work.
I'm now using the EasyAndroid software, its really easy to use, it is design for idiot like me hahaha.
Thank you very much.

kenex91 said:
Its works now, because i missed out the Radio installation part so it won't work.
I'm now using the EasyAndroid software, its really easy to use, it is design for idiot like me hahaha.
Thank you very much.
Click to expand...
Click to collapse
well dont say idiot about urself ... no one was born knowing how to install android ... ignorant would be the perfect word ...just kidding

aaa... i installed the COREDRIOD into my phone and everything was fine. But when i restart my phone and boot it up, it stuck at the COREDROID logo. i waited for 15min and it still stuck there.
Do i have to wait longer? or i having a problem here?

have you made the necessary CWR partition for this rom?

nope.. how much should i partition them?

kenex91 said:
nope.. how much should i partition them?
Click to expand...
Click to collapse
Mostly it will say so in the ROM Thread, or a Readme file in the file you downloaded.

kenex91 said:
nope.. how much should i partition them?
Click to expand...
Click to collapse
in coredroid roms the necessary CWR partition comes within the downloaded rar. when you unpack it you'll see an exe file 'daf'.in your phone go to mgldr menu,with volume buttons come to 'usb flasher' you must see 'usb flasher....usb',right click on daf,choose run as administrator. now follow your screen to finish it. then in mgldr AD recovery-install zip from sdcard-choose zip from sdcard then in your sd find your coredroid........zip, choose it, after it finishes reboot and wait....

mutil said:
in coredroid roms the necessary CWR partition comes within the downloaded rar. when you unpack it you'll see an exe file 'daf'.in your phone go to mgldr menu,with volume buttons come to 'usb flasher' you must see 'usb flasher....usb',right click on daf,choose run as administrator. now follow your screen to finish it. then in mgldr AD recovery-install zip from sdcard-choose zip from sdcard then in your sd find your coredroid........zip, choose it, after it finishes reboot and wait....
Click to expand...
Click to collapse
i don't have DAF in the 300MB CoreDroid zip file, but i have it in the MAGLDR113. is that the same? or i have find CoreDroid DAF?, I read the forum of CoreDroid again and again. There is no DAF.exe file to download.
Please help me
Thank you.

is this the DAF? I don't understand them at all...
What is in the required NAND Partition (flash.cfg)
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 10M
system ya 390M
cache ya 5M
userdata ya|asize|hr allsize

in the first page of nand development there is hd2 nand toolkit by ksubedi. i use it. it has many tools. better download it. on left there is mgldr repartition choose 300 MB and at cache part write 5, then connect your phone to pc choose usb flasher....

or use this attached folder.

Its still not working. Still having the same problem.
This are the steps i have done.
-install hspl 4 (2.08 HSPL)
-install radio 2.15.50.14 rom
-Task29 (clean nand)
-install magldr113
-Go to USB FLASHER
-Repartition using Toolkit (300MB, 5mb Cache)
-flash rom (install CoreDroid from SDcard in zip format)
Stuck at the CoreDroid Logo Start up Screen.
Did i miss out anything to be done?
Please help me out.
Thank you.

if you use eu-hd2 this rom and many others need an ext partition in sd card. do you have an ext partition?

Nand kernel open failed

Hi,
I have researched all the forums and threads and none have worked for me.
I had a previous rom installed and tried to install a new one and got this error at start "Nand open Kernal failed"
Can anyone tell me please how to fix this and install a new or previous rom?

xda_apprentice said:
Hi,
I have researched all the forums and threads and none have worked for me.
I had a previous rom installed and tried to install a new one and got this error at start "Nand open Kernal failed"
Can anyone tell me please how to fix this and install a new or previous rom?
Click to expand...
Click to collapse
Are you using CLK or Magldr (CWM)?
What exact procedure did you follow to flash the new Rom (and what Rom is it)?
Have you tried flashing other Roms?
Mark.

mskip said:
Are you using CLK or Magldr (CWM)?
What exact procedure did you follow to flash the new Rom (and what Rom is it)?
Have you tried flashing other Roms?
Mark.
Click to expand...
Click to collapse
Thanks for your reply Mark. The rom in question is "Dorimanx-Rom-2.8.4-Nightly-209-HIGH-END-CLK"
The procedure I followed using Magldr was:
1) task 29
2) flashed Radio
3) flashed mgldr
4)in mgldr repartition I choose 150mb partition size, 5 cache size, clicked repartition
5)mgldr, ad recovery, advanced, partition sd card , 1024, 0
6)ad recovery-mounts and storage-mount usb storage-when pc sees phone, send rom to phone
7)mgldr menu-ad recovery-install zip from sd-choose zip from sd-find your rom and choose with call button-after installation is complete reboot phone.
I am back on stock Windows Mobile 6.5 as I need a working phone.

xda_apprentice said:
Thanks for your reply Mark. The rom in question is "Dorimanx-Rom-2.8.4-Nightly-209-HIGH-END-CLK"
The procedure I followed using Magldr was:
1) task 29
2) flashed Radio
3) flashed mgldr
4)in mgldr repartition I choose 150mb partition size, 5 cache size, clicked repartition
5)mgldr, ad recovery, advanced, partition sd card , 1024, 0
6)ad recovery-mounts and storage-mount usb storage-when pc sees phone, send rom to phone
7)mgldr menu-ad recovery-install zip from sd-choose zip from sd-find your rom and choose with call button-after installation is complete reboot phone.
I am back on stock Windows Mobile 6.5 as I need a working phone.
Click to expand...
Click to collapse
the reason it failed is because you are using a cLK build for Magldr. Magldr uses a boot folder which contains an initd.gz and a zImage. cLK uses a raw boot.img like native android phones. Hope this helps.

[email protected] said:
the reason it failed is because you are using a cLK build for Magldr. Magldr uses a boot folder which contains an initd.gz and a zImage. cLK uses a raw boot.img like native android phones. Hope this helps.
Click to expand...
Click to collapse
As the previous user stated you have tried to flash a CLK Rom via the CWM method.
You need to download the correct type (with Dorimanx it will be the Dorimanx-Rom-2.8.4-Nightly-209-HIGH-END-MAG.zip version) and flash it via CWM Recovery as you did before.
It should work fine if you do that as everything else you did was correct.
Mark.

[Q] sense 3.5 roms stuck at boot screen

hi guys i have used the Recommands partition for the roms 1GB ext4 partition on my sdcard and tried 2GB, flashed WIPE IT and wiped dalvik also tried task29 and started from scratch, any help would be much appreciated really want to try sense 3.5
thanks

Hi, a possible cause of problem - check your zip file (ROM), copy it to PC and try to unpack, may be it's broken. Sometimes you don't have error message when flashing, but when check on PC it shows errors.

thanks mate i will give that a try

i just extract the 2 roms i have been trying to get to work they seems ok

have you got the correct partition size for the rom ?

Which Sense ROM are you using, anyways?

Try a ext 3 partition on your sdcard then run clean install

thanks guys im sure that i have the correct partition size used HD2 tools and i have been trying to run SENSATION XL ROM EU Clk V 1.0, TBD_Runnymede_sensation_xl and not sure if i have a ext 3 partition i used cLk to partition the sd card thanks again

cozman85 said:
thanks guys im sure that i have the correct partition size used HD2 tools and i have been trying to run SENSATION XL ROM EU Clk V 1.0, TBD_Runnymede_sensation_xl and not sure if i have a ext 3 partition i used cLk to partition the sd card thanks again
Click to expand...
Click to collapse
Have a look at this it enables you to see your partition and convert or revert, might be of some interest to you..... Good Luck.
http://forum.xda-developers.com/showthread.php?t=1154221

can that be flashed on the hd2

cozman85 said:
can that be flashed on the hd2
Click to expand...
Click to collapse
yep... just install via cmw and it will reboot go into ad recovery and you'll see some new options.
Note:Once you reboot it will be gone, if you want it back repeat install.
Nice and handy - Check it out..
Edit: I'm using 4EXTRecovery v2.1.3 RC2 - No problems.

i have had a go at 4EXTRecovery created ext3 and tried ext4 1gb partitions
and copied the rom over through 4EXTRecovery but the rom always hangs at wipe sd-ext

same problem
good morning everbody,
i have same problem - for days i am trying to flash a newer rom and after installing my phone is always keeping to show the bootup logo of each rom i flashed.
i use the magloader 1.13, the recovery 3.0.0.5 and the radio 15.
i am able to install the stock rom of winmo 6.5 from htc (vodafone) an everthing is fine. but going back to a custom android rom is not working anymore.
even if i try to go the "right" way, means:
having the winmo rom --> flashing radio --> flashing magloader --> flashing recovery --> wiping data/reset, wiping cache, wiping that dia*** --> putting rom.zip on the sd card via pc --> installing the zip via recovery. that all works until the phone has to boot. i tried over 8 different roms.
befor i startet to update, i hab an coredroid rom v1.3 and it was booting.
perhaps anybody knows whats my problem with this nd lets me now what i have too look for?
great thanx, cause until now i can only go back to my stock winmo rom and thats boring to me... :-(

Nickman_83 said:
good morning everbody,
i have same problem - for days i am trying to flash a newer rom and after installing my phone is always keeping to show the bootup logo of each rom i flashed.
i use the magloader 1.13, the recovery 3.0.0.5 and the radio 15.
i am able to install the stock rom of winmo 6.5 from htc (vodafone) an everthing is fine. but going back to a custom android rom is not working anymore.
even if i try to go the "right" way, means:
having the winmo rom --> flashing radio --> flashing magloader --> flashing recovery --> wiping data/reset, wiping cache, wiping that dia*** --> putting rom.zip on the sd card via pc --> installing the zip via recovery. that all works until the phone has to boot. i tried over 8 different roms.
befor i startet to update, i hab an coredroid rom v1.3 and it was booting.
perhaps anybody knows whats my problem with this nd lets me now what i have too look for?
great thanx, cause until now i can only go back to my stock winmo rom and thats boring to me... :-(
Click to expand...
Click to collapse
cozman85 said:
i have had a go at 4EXTRecovery created ext3 and tried ext4 1gb partitions
and copied the rom over through 4EXTRecovery but the rom always hangs at wipe sd-ext
Click to expand...
Click to collapse
I'd try this: Back up sd if required.
1/ Remove sd from ph and place in a card reader on pc use "SDFormatter" change options format type to Full (Erase) this will erase the Ext Partition & format the card. Put the card back in the ph.
2/ Volume Down + Power Tri color connect usb. Using "HD2 Toolkit" do Task29 this will wipe the ph.
3/ Tri color Using "HD2 Toolkit" install Magldr (don't know about cLK)
4/ Boot ph go into Magldr navigate To "usb flasher" Using "HD2 Toolkit" select "Magldr repartition" Make sure that you are using the recommended partition size for your rom! Flash partition as directed. Ph will reboot go into "ad recovery" "advanced - partition sd card" select 1024m - 0M this will create 3EXT partition. (Some roms are not compatible with 4Ext) Reboot into "Recovery" select "mount sd" move your "Rom.zip" to sd. Close "mount sd" and select "Install zip from sd - Choose zip from sd" select the zip and install and reboot! .....

thanks everyone for your help after a week digging it was my sd card put a new one in and now running sense 3.5 . thanks again

@ a3r0n1 :
thansk for your advise. it took me some days cause i had no time but after i did exactly what you wrote, my newest coredroid rom is running.
Many Thanks !!!!

Phone doesnt work correctly

hello, i have a hd2 leo and had nand android on it with magldr(1.13)
i had to switch rom because i wass bored of the one i had. i changed in the ad recovery my rom to another rom. i just followed all steps correctly but when i start the rom it just hangs on the rom load screen... when i try another rom they stuck at the load screen and then reboot the phone.
when i try to go in the hspl to use task29 it hangs at 0% when i try task29
when i use the usb flasher in magldr to task29 it it doesnt see its connected.
i cant go back to my default rom womo 6.5
cant start the rom
cant change eveything
please help me, and if i have a new rom how could i clean my sd card from all the files that are on it?
please help me

You don't use the usb flasher in magldr to do a task 29. You must do task 29 from bootloader (Tri-color screen. turn the device on while holding the volume - button down)
It is possible that you don't need to do a task 29 anyways though.
If you still have magldr, then keep it and don't do a task 29.
You probably just have to re-flash CWR with a different partition layout.
What nand rom did you have before, and what rom do you wish to flash now?

i tried also the tri color screen but it stucks at 0%
how do i reflash cwr with a different partition layout?
and i used all kinda roms and they all say the same
but those i tried:
http://forum.xda-developers.com/showthread.php?t=733649
http://forum.xda-developers.com/showthread.php?t=1264828
http://forum.xda-developers.com/showthread.php?t=1298188
btw i have magldr v1.13
cwm 3.0.0.5

If you don't do a "wipe data / factory reset' in cwm, the next rom rarely boots.
enter cwm and do the reset, see if it helps. The comment above about partition size is the next most common reason.
as for "hangs at 0%",,, does it say "2.08.hspl" in bootloader?

hello, i always do wipe data factory reset and also cache
it says:
Code:
pb81100 HX-BC
spl-2.08.0000 8g XE
microP(led) 0x05
MicroP(touch) 0x30
EDIT; i tried to update the tri color screen to 2.08 HSPL and now i have 2.08.Hspl
but it still doesnt work
Edit2; now i did a task29

okay, so i changed my hspl to 2.08 it was 2.0800000
i did a task29
formated my sd to fat32
i reinstalled my magldr v1.13
i reinstalled my clockwordmod 3.0.0.5
and i tried to launch a rom and it stucks to the first screen (a girl with htc on it)
then i tried another rom ofcourse i wiped all my data/factory also stucked to the first screen (nrg z energiz)
what am i supposed to do now because it just dont wanna work.
change back to winmo 6.5? and then again flash to nand?

please someone help me i updated to hspl2.08
installend stock winmo 6.5
reinstalled magldr 1.13 and clockworkmod 3.0.0.5
tried to boot a rom and still doesnt work
please help me please

pleaseee help me i m still paying for my phone pleasee help mee

iefen said:
please someone help me i updated to hspl2.08
installend stock winmo 6.5
reinstalled magldr 1.13 and clockworkmod 3.0.0.5
<----------->
tried to boot a rom and still doesnt work
please help me please
Click to expand...
Click to collapse
what did you do <-------> ? because you dont mention flashing any rom, just skipped straight from reinstalling magldr and cwm to 'tried to boot'
What partition size did you flash? what rom did you flash?
lots more details please,.

samsamuel said:
what did you do <-------> ? because you dont mention flashing any rom, just skipped straight from reinstalling magldr and cwm to 'tried to boot'
What partition size did you flash? what rom did you flash?
lots more details please,.
Click to expand...
Click to collapse
I didn't flashed anything, In the video I saw the man didn't flashed after installing cwm
Partiton no one told me about partitions so I didn't made one

[Q] **** Solved **** Cannot install Nand Roms....

:victory:****** Solved *******
Hi, thank you for all of your help and assistance.
It was all down to selecting the correct partitions (and me getting over enthusiastic in flashing roms and not reading FULLY on how and what partitions are required)
I have used HD2 Nand toolkit, and partitioned MAGLDR, then partitioned SD card within Clockworkmod.
Thank you all again for pointing me in the right direction...
Good Evening All,
I am sorry if this has been covered. I have searched the forums but cannot find an answer.
I have read all the FAQ and How-to's.
I am not an exact newbie, I have owned a HD2 before (about 2 years ago) and could install all sorts of different roms (including NAND)
I have Installed my Radio 2.15.50.14
I have installed HARD SPL 2.08
I have Installed MAGdlr 1.13
I ahve installed clockwork mod recovery 1.3 with 400M
Copied rom to root of SD Nexus HD2 jellybean v1.2 [dataonext]
and I have installed Nexus HD2 jellybean v1.2 [dataonext]
this installed fine,
I then decided to try another,
I downloaded QSEA_JB-MUSIC EDITION_V1 and placed on root of SD,
I booted into Magldr, then into clockwork mod
from here i wipe data, and factory reset,
wipe cache partition
and wiped delvic cache.
Then i install zip from sd card QSEA_JB-MUSIC EDITION_V1
when this is done,
It asks me to reboot,
Then it stays on the boot screen, and the rom does not load.....
I can restore the back up from the original rom install. but whatever rom I install (from Nand rom downloads) none of them install...
Please help...
Matt

matt_tee said:
Good Evening All,
I am sorry if this has been covered. I have searched the forums but cannot find an answer.
I have read all the FAQ and How-to's.
I am not an exact newbie, I have owned a HD2 before (about 2 years ago) and could install all sorts of different roms (including NAND)
I have Installed my Radio 2.15.50.14
I have installed HARD SPL 2.08
I have Installed MAGdlr 1.13
I ahve installed clockwork mod recovery 1.3 with 400M
Copied rom to root of SD Nexus HD2 jellybean v1.2 [dataonext]
and I have installed Nexus HD2 jellybean v1.2 [dataonext]
this installed fine,
I then decided to try another,
I downloaded QSEA_JB-MUSIC EDITION_V1 and placed on root of SD,
I booted into Magldr, then into clockwork mod
from here i wipe data, and factory reset,
wipe cache partition
and wiped delvic cache.
Then i install zip from sd card QSEA_JB-MUSIC EDITION_V1
when this is done,
It asks me to reboot,
Then it stays on the boot screen, and the rom does not load.....
I can restore the back up from the original rom install. but whatever rom I install (from Nand rom downloads) none of them install...
Please help...
Matt
Click to expand...
Click to collapse
1-Why? Use the HD2 NAND Toolkit to partition your system according to the developer.
2- Never reboot directly from the "reboot now" option of amarullz's installer. Instead, uncheck the "reboot now" option, click finish and reboot manually from CWM.
(The reboot option somehow makes your rom not boot, at least that happens to me every time)

Marvlesz said:
1-Why? Use the HD2 NAND Toolkit to partition your system according to the developer.
2- Never reboot directly from the "reboot now" option of amarullz's installer. Instead, uncheck the "reboot now" option, click finish and reboot manually from CWM.
(The reboot option somehow makes your rom not boot, at least that happens to me every time)
Click to expand...
Click to collapse
Thanks,
I will give it a go!
Have already downloaded toolkit, and just watching the video on how to use...
Matt:fingers-crossed:

So, do I just use Magldr to partition and don't install CWM?
I tried to re-partition with CWM, but lost magldr.....
What am I doing wrong?
Still cannot install NAND rom.
Going to do Task 29 again, where from there??
Thanks for your help and patience...

try the links below, it might help

matt_tee said:
So, do I just use Magldr to partition and don't install CWM?
I tried to re-partition with CWM, but lost magldr.....
What am I doing wrong?
Still cannot install NAND rom.
Going to do Task 29 again, where from there??
Thanks for your help and patience...
Click to expand...
Click to collapse
I don't use magldr, so I am not sure.
But I think you have to "MAGLDR recovery update" first, and then after it finishes you have to "magdlr repartition". Im not sure though.

How do I just install clockwork mod? Without using Magldr?
If I Task29 first,
What's my next step.....?

After Task29 (don't do task29 again) you have to do the following: http://forum.xda-developers.com/showthread.php?p=25781675#post25781675 until you see the "recovery" .. from there, dont continue to flashing wp7, just put your rom on your sd and flash it from recovery. (don't forget to thank the the one who made the thread/guide)
Don't forget to NOT use 300mb, but use the one written on your rom's thread.

matt_tee said:
How do I just install clockwork mod? Without using Magldr?
If I Task29 first,
What's my next step.....?
Click to expand...
Click to collapse
You can't have CWM without MAGLDR. If you've flashed CWM you shouldn't have lost MAGLDR at all, so I don't know what you did wrong. Task 29s are also almost always useless and unnecessary, if a guide says 'task 29' as the first step then usually you can just skip that part. I find that the best guide is the one in my sig, try it out.