Database Users

screen of dead - white screen

hi
needs some help here.
when i ran superhd2, it just went 2 black screen, it was not first time i tried this, so i took out the battery and then put it in again, but now it won't boot up again. when i turn it on it only shows a white screen, have aslo tried this before, but then i just soft reset it a couple of times and then it worked again.
have tried to flash a new rom in bootlaoder, but could't falsh a stok rom, it failed. Also tried task29. but task 29 not working it stuck on 0%.
what can i more try to fix it

fischerben said:
hi
needs some help here.
when i ran superhd2, it just went 2 black screen, it was not first time i tried this, so i took out the battery and then put it in again, but now it won't boot up again. when i turn it on it only shows a white screen, have aslo tried this before, but then i just soft reset it a couple of times and then it worked again.
have tried to flash a new rom in bootlaoder, but could't falsh a stok rom, it failed. Also tried task29. but task 29 not working it stuck on 0%.
what can i more try to fix it
Click to expand...
Click to collapse
you haven't given any details about your phone whether its a eu or us version also what radio or hspl you are using.
id say 1st step, try to update hspl, select 2.08 then try task 29 again

sorry
eu version
Radio: 2.15.50.14
WinMo: OzDROID ROM 2.00
Android SuperHD2_v14
kernel 8.5
hspl3 2.08

tried to flash task29 from sd card and that worked, but didn't help. i can't still install a stock rom, but can install for example Ozdroid but that don't help much, it still white screen when i turn it on

I had something similar I ended up sending it for repair and got a new phone as they were unable to remedy the problem. Maybe you will need to do the same.

oki, but what about when it is HSPL and warranty.
it could be nice to flash it to stock rom first, before sending it in. but it says fail when it comes to Radio_v2 on installation from sd card

hd2 stuck magldr 1.13 help!

Was trying to install wp7 on my hd2, but now im stucked on magldr version 1.13. Forgot that the volume buttons doesnt work and i cant get the phone out of there. Try to load original rom or even task 29 but nothing becuase the pc doesnt recognize it. When the phone its booting it says something like cant boot from sd android kernel fail and then the menu and i can select only the first 1 boot wph.
Is there a way to get the phone out of there, or my only hope its to repair the volume button.
thanks

If you haven't been able to flash anything then as long as you just reboot your phone you'll just go back to whatever ROM you had previously

I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?

i remove the battery but when the hd2 start again it boots instantly to magldr, i need another way to flash it different to the three color screen (i cant get there becuase the volume down button its broke).

i have a problem like that

If your volume keys don't work, then there is seriously, no other way. You can't get into bootloader mode without the volume keys, and the you can't flash a different rom without the volume keys, so yeah, your device is pretty much bricked....

But IF the vol. down key works, I assume that it is something with MAGLDR or HSPL, or possibly an error in RAM. Are there anything that can be flashed via magldr that checks the state of underlying HSPL?

any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed

Maybe I'm tired or too old... but I don't understand your questions
You can imagine the different "softs" as layers:
1st: HSPL (or SPL) - it's the one you enter by pressing vol-down while booting.
this one give you the ability to flah a WM ROM (original or custom), a radio or MAGLDR
So if vol-down if dead... your phone also
nb: the first splash screen is at this level, so it will be still here after flash of MAGDR, CWM, NAND, WM7...
2nd: MAGLDR - it's the one you go in by pressing "end call" while booting.
It gives the ability to flash a NAND or WM7 via DFT
So if "end call" is dead... you're not But it's anoying I think...
3rd: CWM - it's the one you go in by selecting "AD recovery" in MAGLDR
It gives you the ability to flash a "CWM NAND" or an update... It also gives the ability to backup/restore a NAND.
So please clarify your question if you need help. More important do not post different problem by saying "same here". It's just confusing. Even if you can't boot your NAND it's not always the same problem
Let's try again dudes

osugsxr said:
any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed
Click to expand...
Click to collapse
HTC after sales... or few bucks

That is what I'm thinking, will try warranty to see if that works if not not ill see what they charge. For now back to the nexus s.
truc007 said:
HTC after sales... or few bucks
Click to expand...
Click to collapse
Sent from my Nexus S using XDA App

This is the answer to your problem if it does work find someone that is not a noob and have them fix your phone its really not that hard

Ok guys please help me I don't wanna start new thread
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash custom rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated

Stuck for me too
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.

hi, have u tryed with the small button under the volume down button? it works as the volume down button...
If u can go in bootloader (if ur volume down works) could be ur nand is corrupted (as mine ) so bye bye hd2... i m waiting for the htc sensation

DAF doesnt' work
ChitownWingMan said:
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I figured out the Android problem (I needed a different rootfs).
I have magldr 1.13 working!!!!
However, when I try to run DAF I get the same:
"An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)"
error that I have seen all over XDA-Dev.
However, none of the fixes I have seen on here have worked. I am running Windows 7 Professional.
I have tried:
Disabling Use USB in the Window Mobile Device Center
I have tried ANDR_INSTALL
I have rebooted
I have tried deleting all of the unattached USB device in the device manager.
I have tried using LeoAdvancedRUU
I have tried starting DAF first and then connecting the usb cable
I have tried connecting the USB cable first and then the starting DAF.
Help please!!! I was up until 8:30 AM trying to get this to work (I started at about 10:00 PM).

i also put the hd2 into the freezer for 10 minutes to solve heat problem and it doesn't start bootloaderi...
the nand corrupted..it start magdle but don't start android or cwm..there is nothing to do

tser04 said:
I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?
Click to expand...
Click to collapse
I have the same exact problem !! WP7 is the only OS that works and I want android
also the volume down key works...should I try to reflash HSPL ?? will that work ?? since HSPL 2.08 is already installed !??

Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (291)

Stuck on loading factory .nbh

To begin with I have searched and tried to flash several files, 1 worked to a point , but after the phone restarted and loaded everything, it went into a boot loop. I am not a noob to flashing, I am a noob to flashing HTC units. I tried loading from the USB and loading from the card, nothing will stick and work. any help would be great, Thanks Lenny

back to stock rom
razor1 said:
To begin with I have searched and tried to flash several files, 1 worked to a point , but after the phone restarted and loaded everything, it went into a boot loop. I am not a noob to flashing, I am a noob to flashing HTC units. I tried loading from the USB and loading from the card, nothing will stick and work. any help would be great, Thanks Lenny
Click to expand...
Click to collapse
When I got problems because of Magldr 1.13, I went first to SPL 2.08 using HSPL3 then to SPL 1.66 using HSPL2, then first flashing stock ROM 1.66 and then stock ROM 3.14. I have used USB flashing from volDown+start buton.
I hope it helps

i cant get it to stay on long enough to try SPL3 keeps booting.

Battery
razor1 said:
i cant get it to stay on long enough to try SPL3 keeps booting.
Click to expand...
Click to collapse
Battery out for 30 sec, battery in, press volDown (and keep it pressed till tricolor boot), short press start button; after U see tricolor and serial on the down screen, plug USB ---> serial will change in USB then flash....
And don't forget battery level 50% or more (usualy 80%) before flashing!!!
I say HSPL3 and HSPL2 and not SPL3!!!!

[Q] HD2 From Tmobile will not boot ?!

So my phone froze up , and i rebooted it and its stuck on the "tmobile Stick together logo " where it displays the Radio version and all , and its in that screen for a minute or two and then it goes to a black screen where it says that " You have turned off your phone incorrectly and basicaly the only option that it gives me is to hard reset my phone by pressing " volume up button" .... and i do ! and NOTHING ! HELP

is it from wrong installed ROM, or ?

Can you enter the bootloader?.Firstly, you should do a hard reset to see if that fixes the problem. And did you flash the correct radio or HSPL for your device. If you have not flashed a radio or HSPL, you should enter bootloader and flash HSPL and the radio. If the problem still persists, you should do a Task 29 after flashing HSPL. After doing that, flash the stock ROM again.Once, again, rmb to flash the correct HSPLs, Radios and ROMs for your TMOUS HD2.

Reflash Rom

A friend gave me his non-working HD2 to try fix. It would only boot to a white screen (no HTC logo). I was able to get to the multicoloured screen by pressing the vol down + power button. I tried flashing the latest RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship rom via USB but repeatedly it got as far as 1% then gave me an error 270 message. I then extracted the image, copied it an sd card and tried to install from the card. It seemed to go ok until it stopped at 4% then rebooted. I now get as far as a white screen plus HTC logo but no further. Any attempt to flash another rom from the sd card gives an error 00028002 'not allowed' then I get the multicoloured screen but the SPL has changed to 3.03.0000 from I think 2.08 but I can't be certain. Perhaps with hindsight I should have written down what the old screen said!
Any ideas to rescue the situation willingly accepted.
Thanks,
Geoff.

With SPL being stock, you don't have many options. You can try flashing HSPL and then stock winmo/other OS. Or you can try to flash original stock through SD.
By the way, if the device was originally broken because of an overheating issue, you might have to cool the device before attempting to flash anything.
Good luck.

rebgershon said:
A friend gave me his non-working HD2 to try fix. It would only boot to a white screen (no HTC logo). I was able to get to the multicoloured screen by pressing the vol down + power button. I tried flashing the latest RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship rom via USB but repeatedly it got as far as 1% then gave me an error 270 message. I then extracted the image, copied it an sd card and tried to install from the card. It seemed to go ok until it stopped at 4% then rebooted. I now get as far as a white screen plus HTC logo but no further. Any attempt to flash another rom from the sd card gives an error 00028002 'not allowed' then I get the multicoloured screen but the SPL has changed to 3.03.0000 from I think 2.08 but I can't be certain. Perhaps with hindsight I should have written down what the old screen said!
Any ideas to rescue the situation willingly accepted.
Thanks,
Geoff.
Click to expand...
Click to collapse
the first thing to happen when you sd card flash a stock rom, is that hspl gets removed, or if it isnt present, teh stock spl gets updated to teh one contained in teh new rom. Then the phone reboots into the new bootloader, and flashing starts.
What happened to you is it removed hspl, rebooted, and the fresh 3.03.0000 detected that the rom region/carrier doesnt match the phones region/carrier, and so failed.
That being said, teh fact that it wouldnt flash over usb is worrying, im leaning towards a faulty phone, but its early days yet.
Try setting hspl again, hspl4, set 3.03.hspl (not .0000) and try flash the rom you listed again, over usb, and report back.

samsamuel said:
the first thing to happen when you sd card flash a stock rom, is that hspl gets removed, or if it isnt present, teh stock spl gets updated to teh one contained in teh new rom. Then the phone reboots into the new bootloader, and flashing starts.
What happened to you is it removed hspl, rebooted, and the fresh 3.03.0000 detected that the rom region/carrier doesnt match the phones region/carrier, and so failed.
That being said, teh fact that it wouldnt flash over usb is worrying, im leaning towards a faulty phone, but its early days yet.
Try setting hspl again, hspl4, set 3.03.hspl (not .0000) and try flash the rom you listed again, over usb, and report back.
Click to expand...
Click to collapse
I've got a very similar problem to this. My phone only boots to a blank white screen. When I hold the volume down button when turning it on, I can get to the bootloader.
From there, sometimes I can set 3.03 hspl, but most of the time the phone freezes at 0%. If I try to flash a stock rom, it stays frozen at 0%. If any of these updates work, then it still only boots to the HTC logo on the white screen.
I'm trying to flash via USB, could this be a faulty phone? I wonder what could be faulty?

yeoldgreat1 said:
could this be a faulty phone? I wonder what could be faulty?
Click to expand...
Click to collapse
yea sounds like it, lots of reports of exactly this, some kind of hardware probably, though JTAG may help.