USB not detected by PC - Galaxy Y GT-S5360 and Duos 6102 Q&A, Help & Troubl

Dear friends,
Recently I damaged by USB port. So, I sent my phone for repairing at Samsung Servicing Centre where they replaced my USB port. After they replaced my USB port, my phone is not detected by PC anymore. Nothing happens at all if I connect my phone to a PC. There is no notification at all. My phone is only charging. I tried pulling up and down the tongue - like structure inside my USB port but it's of no use at all. I am at a delimma. Please help.

thadoukuki said:
Dear friends,
Recently I damaged by USB port. So, I sent my phone for repairing at Samsung Servicing Centre where they replaced my USB port. After they replaced my USB port, my phone is not detected by PC anymore. Nothing happens at all if I connect my phone to a PC. There is no notification at all. My phone is only charging. I tried pulling up and down the tongue - like structure inside my USB port but it's of no use at all. I am at a delimma. Please help.
Click to expand...
Click to collapse
repairs are usually covered by warranty upon the same issue incase they were unable to fix it.
take it back to them and demand to resolve the issue,
you paid good money for the repair and therefore should be entitled to it

maybe u haven't installed samsung usb drivers

the same problem with mine., i just changed my usb chord after that i cannot connect to usb mass storage anymore even i installed usb driver still can't access storage

rio. said:
the same problem with mine., i just changed my usb chord after that i cannot connect to usb mass storage anymore even i installed usb driver still can't access storage
Click to expand...
Click to collapse
here's what i do when that happens:
(1) re-install drivers
(2) reboot pc and also cp
(3) connect chord and wait till the pc auto installs the drivers
(4) press "ok" connect phone storage
ps: also try to straighten the chord and flex it a bit. hehe

Reynaldi said:
maybe u haven't installed samsung usb drivers
Click to expand...
Click to collapse
I have installed Samsung Galaxy Y USB Drivers on my PC.
Sent from my GT-S5360 using xda premium

sheen_bebe said:
here's what i do when that happens:
(1) re-install drivers
(2) reboot pc and also cp
(3) connect chord and wait till the pc auto installs the drivers
(4) press "ok" connect phone storage
ps: also try to straighten the chord and flex it a bit. hehe
Click to expand...
Click to collapse
Sorry bro, it's not working.
Sent from my GT-S5360 using xda premium

deathnotice01 said:
repairs are usually covered by warranty upon the same issue incase they were unable to fix it.
take it back to them and demand to resolve the issue,
you paid good money for the repair and therefore should be entitled to it
Click to expand...
Click to collapse
I didn't trust them anymore bro. They know little about software. They flatly told me that my USB was blocked.
Sent from my GT-S5360 using xda premium

Deleted

Deleted

The main problem is that it is not even detected by my PC as connected. There is no notification of the phone being connected at all both in PC and phone. Can this be due to the USB cable that I am using? Or is the new USB port incompatible with my phone? Will reflashing the Rom solve the problem? The Samsung Servicing Centre fellows have no solution at all. They simply said that it is a software problem because I am on a custom Rom and that my USB is blocked. I don't think USB port can get blocked because of flashing a custom Rom because it was working fine before the repair. Please please please help me.
Sent from my GT-S5360 using xda premium

thadoukuki said:
The main problem is that it is not even detected by my PC as connected. There is no notification of the phone being connected at all both in PC and phone. Can this be due to the USB cable that I am using? Or is the new USB port incompatible with my phone? Will reflashing the Rom solve the problem? The Samsung Servicing Centre fellows have no solution at all. They simply said that it is a software problem because I am on a custom Rom and that my USB is blocked. I don't think USB port can get blocked because of flashing a custom Rom because it was working fine before the repair. Please please please help me.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
this also happens to me sometimes and ive already given you my own solution to this
if your phone is charging when you connect to the pc..
it means the chord is maybe working..
try to tighten the usb chord connector to the usb socket of your pc..
are you sure you are using the right drivers?? kindly check or use the kies cd
be patient and wait for the phone drivers to be automatically installed by the pc when you connect the phone fr the 1st time..
try turning off you anti-virus.. (not related but....)

thadoukuki said:
The main problem is that it is not even detected by my PC as connected. There is no notification of the phone being connected at all both in PC and phone. Can this be due to the USB cable that I am using?
Click to expand...
Click to collapse
There are charge only cables that do not data connect. If it is trickle charging the phone that is the problem. But you say there is no indication of a connection; sorry I just kinda jumped in at random. Your post popped up in the new posts list.
Sent from my SubGenius™ LG P925 with XBSA 3D ICS ROM and downloadable Slack™

Are ur usb ports properly functioning ? ie pendrive or other are working properly ?
also is your usb cable working ? if possible you can try with your friends usb cable which can go in your phones port .
if nothing works flash stock rom again
Sent from my GT-S5670 using xda premium

sheen_bebe said:
this also happens to me sometimes and ive already given you my own solution to this
if your phone is charging when you connect to the pc..
it means the chord is maybe working..
try to tighten the usb chord connector to the usb socket of your pc..
are you sure you are using the right drivers?? kindly check or use the kies cd
be patient and wait for the phone drivers to be automatically installed by the pc when you connect the phone fr the 1st time..
try turning off you anti-virus.. (not related but....)
Click to expand...
Click to collapse
I am using the latest Samsung USB drivers for mobile phones. My phone is only charging. No notification nor sound of connection to PC.
Sent from my GT-S5360 using xda premium

soham jambhekar said:
Are ur usb ports properly functioning ? ie pendrive or other are working properly ?
also is your usb cable working ? if possible you can try with your friends usb cable which can go in your phones port .
if nothing works flash stock rom again
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Pen drives are working properly. I don't think its the cable because it is the original USB cable provided with the phone. I have tried with other USB cables but same result. Will flashing stock Rom really solve the problem? I can't flash stock Rom because I can't connect to Odin boy longer.
Sent from my GT-S5360 using xda premium

drastic00 said:
There are charge only cables that do not data connect. If it is trickle charging the phone that is the problem. But you say there is no indication of a connection; sorry I just kinda jumped in at random. Your post popped up in the new posts list.
Sent from my SubGenius™ LG P925 with XBSA 3D ICS ROM and downloadable Slack™
Click to expand...
Click to collapse
I am using the USB cable supplied with the phone. It was working flawlessly before.
Sent from my GT-S5360 using xda premium

if its charging and pendrive is working then we can eliminate hardware issues
now for software its either pc or mobile
try connecting with another pc . it it doesn't work then its not pc problem
all I can say is flash stock rom then
Sent from my GT-S5670 using xda premium

soham jambhekar said:
if its charging and pendrive is working then we can eliminate hardware issues
now for software its either pc or mobile
try connecting with another pc . it it doesn't work then its not pc problem
all I can say is flash stock rom then
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
How will I flash stock Rom when USB is not working? Or is there a flashable zip of Stock Rom available?
Sent from my GT-S5360 using xda premium

Related

uable to get usb connection working

since around a week ago my phone has not been able to connect to the usb ,
it does still charge via usb cable from the pc but the cable is not detected for mass storage ,kies or usb debug .
i know drivers are ok on pc as my wifes phone still connects fine .
is there any way to test that the usb socket is broken internally
i am haing same prob here after flashing a rom
just backing phone up with clockwork mod then going to do a factory restore to see if it cures the problem ,dont think it will but i can but try . device doesnt even go into mtp ? mode .
even in clockwork recovery when the usb is mounted as mass storage it isnt detected
well tried that no success , cant send phone back as cant factory restore it as i cant connect to odin. by the way what rom are you running and what version of galaxy have you got 8gb or 16gb
jona29 said:
just backing phone up with clockwork mod then going to do a factory restore to see if it cures the problem ,dont think it will but i can but try . device doesnt even go into mtp ? mode .
even in clockwork recovery when the usb is mounted as mass storage it isnt detected
well tried that no success , cant send phone back as cant factory restore it as i cant connect to odin. by the way what rom are you running and what version of galaxy have you got 8gb or 16gb
Click to expand...
Click to collapse
Have you tried the debugging mode?
EDIT : Try installing the usb drivers from my signature.
ive tried debugging mode no different , i can even select - deselect usb debugging whist the usb cable is connected .
the usb drivers from your sig are for windows x64
my wifes galaxy s is detected by the computer fine ,same usb cable and port
jona29 said:
ive tried debugging mode no different , i can even select - deselect usb debugging whist the usb cable is connected .
the usb drivers from your sig are for windows x64
my wifes galaxy s is detected by the computer fine ,same usb cable and port
Click to expand...
Click to collapse
What OS are you running?
windows 7 32 bit
galaxy s 16gb with darkys v8 gingerbread (previously darkys version 6)
Can't you get hold of a friend's usb cable?
hi i have multiple usb cables here 2 original samsung galaxy cables plus multiple other micro usb cables . non of which work with the phone . not to sound ignorant but dont you think i have tried the obvious things first ?
Try a wipe/reset
If that doesnt work, try an other rom .... Stock or non-darkyy
If that doesnt work, im afraid there is a hardware problem
Sent from my GT-I9000 using XDA App
Cypher_X said:
Try a wipe/reset
If that doesnt work, try an other rom .... Stock or non-darkyy
If that doesnt work, im afraid there is a hardware problem
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
You are funny, their phone is OK, the CABLE doesn't work. Right?
jona29 said:
hi i have multiple usb cables here 2 original samsung galaxy cables plus multiple other micro usb cables . non of which work with the phone . not to sound ignorant but dont you think i have tried the obvious things first ?
Click to expand...
Click to collapse
DID you try to put a RIGHT cable into a WRONG hole???
You are not alone, I have exactly the same problem, but wrote it off as a hardware problem, because it started after my son (9 months and teething) gnawed on the phone for some time...
Sent from my GT-I9000 using Tapatalk
ok tried different roms etc no luck must be hardware related going to open the phone tomorrow and check the usb socket . only really worried incase i need to use odin to recover after a bad flash , or incase the usb decides to die completely and i cant charge the phone
jona29 said:
since around a week ago my phone has not been able to connect to the usb ,
it does still charge via usb cable from the pc but the cable is not detected for mass storage ,kies or usb debug .
i know drivers are ok on pc as my wifes phone still connects fine .
is there any way to test that the usb socket is broken internally
Click to expand...
Click to collapse
Hey Jona29 i had the same problem some time ago i solved it by changing usb port (preferably one direct to motherboard) while pc is off then start it while in download mode and flash with odin.
Good luck bud, i know how frustrating it is
UPDATE ! fixed the phone ,yes it was hardware not software at fault . dissasembled the phone and removed the board with the usb connector on .
heated the board around the connector with a pyro pen to reflow the solder
let it cooled and then reassembled the phone .
powered up phone and connected usb lead ,computer recognised phone and phone recognised usb connection
probably took me 30 mins to complete the task.
better than say a 4 week wait from samsung
jona29 said:
heated the board around the connector with a pyro pen to reflow the solder
Click to expand...
Click to collapse
Slick. I have taken my phone apart for USB problems as well, but I would be scared to try to reflow something on the PBC. The connections are so small.
I have had the USB issue as well but it always seemed to be the cooked ROM iI was using.
Ian
I had the same problem, after using DXJPA ... every time i connected the phone (even in boot mode) i received "USB device not recognized" ... I don't know what worked in the end, but i tried a lot of things: I bought a new cable (same problem), I used another computer (same problem), I tried on W7 x64, W7 x32, XP SP3 (same problem), uninstalled and reinstalled Kies, I uninstalled and reinstalled an older version of Kies, changed the phone form a computer to another, played a lot with USB ports ...
After 2-3 hours of pain, Odin saw the phone ... flash it to JPY and no USB problem anymore ...
Maybe this will help someone
mik3y007 said:
I had the same problem, after using DXJPA ... every time i connected the phone (even in boot mode) i received "USB device not recognized" ... I don't know what worked in the end, but i tried a lot of things: I bought a new cable (same problem), I used another computer (same problem), I tried on W7 x64, W7 x32, XP SP3 (same problem), uninstalled and reinstalled Kies, I uninstalled and reinstalled an older version of Kies, changed the phone form a computer to another, played a lot with USB ports ...
After 2-3 hours of pain, Odin saw the phone ... flash it to JPY and no USB problem anymore ...
Maybe this will help someone
Click to expand...
Click to collapse
have the same problem..
tried everything.. i dont dare to reflow my phone..

USB problem with HTC Desire HD

Hey guys,
I currently recently installed a custom ROM from this website and for some reason now when I plug in my USB into my PC it comes up not being detected so when I put my phone as hard drive so I want to transfer music, it doesn't detect it. Can anybody help me if this is ROM problem or just my USB?
Hey,
Okay I disabled USB debugging didn't know it was on, still doesn't work says windows cannot find USB device not reconginzed when I connect the USB. For the Reinstalling usb driver I do not know how to this ~?
i have the same problem.. turn "fast boot" off and restart the phone.. this always works for me.. hope this helps
Hey, I turned fastboot off. Doesn't work. I ordered new usb cable.. hopefully this works and it was just a fault with the cable!
Sent from my Desire HD using XDA App
Usually this is a problem with the cable. Simple, cheap to fix. Keep your old cable around for charging though (nice to have a spare)
Is this problem with the USB still active?
If so try a different PC just in order to eliminate WinOS issues.
If not close.
Hi,
I have the same problem at some months ago. I tried the cable and pfone on another PC, and it works fine. So, I recommend to try it on another PC and reinstall your Windows.
brgs,
Herold
Had the same propblem! Turns out it was the usb cable, it charged fine with the cable but data transfer didnt work.
i also had the same problem since last week and still cant resolve till now...i try all the option that u gave(change cable/pc,turn off fastboot)....i even sent my phone to shop and they still cant detect.they said maybe the usb port is damage or some software that may block my usb port?is it true? anyone can help?????
necrs said:
i also had the same problem since last week and still cant resolve till now...i try all the option that u gave(change cable/pc,turn off fastboot)....i even sent my phone to shop and they still cant detect.they said maybe the usb port is damage or some software that may block my usb port?is it true? anyone can help?????
Click to expand...
Click to collapse
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Grant Barker said:
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Click to expand...
Click to collapse
before this is ok.just last week i remember that i pull the usb cable from the phone quite hard.but i don think that the usb too sensitive that will break by that.still can charging... but not detected in pc
I had similar problem and it was hardware, I sent it back to Vodafone and they sent me a replacement!
I am running CM7 now its awesome.
Andy
USB BRICK in my INSPIRE 4G ( DESIRE HD)
Hi, all
I got a new inspire 4g last week.( equivalent to desire hd ). It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not recognize the phone as device. I have tried all the suggestion on xda but no luck.
As fastboot is also not detected by PC I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
Grant Barker said:
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Click to expand...
Click to collapse
musarraf172 said:
Hi, all
I got a new inspire 4g last week.( equivalent to desire hd ). It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not recognize the phone as device. I have tried all the suggestion on xda but no luck.
As fastboot is also not detected by PC I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
Click to expand...
Click to collapse
First of all.. you have HTC Sync installed right?
Happened to me initially as well.. although for me changing the cable and/or changing the USB port on the PC solved the issue. Have you tried these?
Also sometimes killing all apps on the device before connecting helped.
You can try accessing your device through ADB to see if its being detected.
And I really dont think you'll need to change the main board..
USB brick on my Inspire 4G
Thanks for your reply. When I go the phone ADB and Fastboot were working
well. There was no driver issue. Now even PC also does not detect the phone or any new hardware when I connect it to pc. I had working fastboot on both win7 and Linux (ubuntu) pc. Now in both OS the phone is not detectable. Windows device manager does not see any new hardware when I connect my inspire . dmesg also does not show my hardware when I connect my inspire to linux pc.
Please help or suggest me to investigate further. I know how to install and work with adb and fastboot as well as Clockwork recovery ( also ext recovery). Some people suggested to flash a new radio. I can flash the new radio via sdcard. But how safe is it ? My phone is S-off and made unbranded. Will flashing a new radio make my phone locked AT&T again? ????
Thanks a lot
if4ct0r said:
First of all.. you have HTC Sync installed right?
Happened to me initially as well.. although for me changing the cable and/or changing the USB port on the PC solved the issue. Have you tried these?
Also sometimes killing all apps on the device before connecting helped.
You can try accessing your device through ADB to see if its being detected.
And I really dont think you'll need to change the main board..
Click to expand...
Click to collapse
As far as I know.. USB problem has no relation whatsoever to Radio. Radio is only concerned with the signal stuff. Flashing it isn't that risky if you follow the instructions... There's a thread in the development section about Radio's which explains it pretty nicely.
As for the USB problem, are you using a Custom ROM? Some ROMs like LeeDroid have USB detection problem which can be solved simply by flashing a different kernel like LordMod's.
What I meant by "Accessing through ADB" was if commands like "adb remount" or any adb command as such are working when your phone is connected to the PC? Or is it showing "error: device not found"?

Help Me Please Please

Hi
I Have Samsung Galaxy S.
I Have Installed Paranoid Custom ROM On My Device Now I Need To Flush The Original ROM
But I have Problem : When i connect my phone to pc the phone doesn't show any thing any connection massage and even if i enter the phone in downloading mode the pc and the phone doesn't show show any thing
Please I Need help i can't flash any stock rom please help:crying::crying::crying::crying:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
I forgot to post links
Here will you find Stock Firmwares
http://cur.lv/2j5o
Flash Guide
http://cur.lv/2j5p
Drivers
http://cur.lv/2j5q
Flashprograms
http://cur.lv/2j5r
Service Manuals
http://cur.lv/2j5s
diklooc said:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
Click to expand...
Click to collapse
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Kurre said:
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Syrian Eagle said:
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Click to expand...
Click to collapse
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Syrian Eagle said:
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Click to expand...
Click to collapse
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Lexrsk said:
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Click to expand...
Click to collapse
Ok How Can I Install the ICS/JB Drivers into my phone :crying::crying::crying::crying:
xsenman said:
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Click to expand...
Click to collapse
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Syrian Eagle said:
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Click to expand...
Click to collapse
Every possible reason and solutions that I am aware of, for them are mentioned on that link , you have to try and test each one out, including various Drivers, for you to test...
BUT you keep saying there was no Sign of connection, which means the PC does not say anything (like unknown USB Device) or make a sound and your USB icon does not appear on the phone...am I correct???
That simply means there is NO link, which means, its either your USB cable or USB Port is damaged
alexovy said:
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Sorry nothing get petter still the problem

[Q] galaxy y isnt showing usb connected.why??

I have a galaxy y model gt-s5360
till yesterday it was connecing to my pc
today i installed a app called mobiler to take control of it via pc
after that whenever i connect my phone to pc it just charges and doesnt show usb connected
i removed mobiler app then connected but then also it only charges and not show usb connected
i use a nokia data cable to connect. it worked perfectly with my device till yesterday.
i thought that may be the cable is not working but when i used it to connect my nokia device it worked perfectly
i dont want to flash any custom rom or any thing
please help
i will press thanks for sure for useful help
abhishekr700 said:
I have a galaxy y model gt-s5360
till yesterday it was connecing to my pc
today i installed a app called mobiler to take control of it via pc
after that whenever i connect my phone to pc it just charges and doesnt show usb connected
i removed mobiler app then connected but then also it only charges and not show usb connected
i use a nokia data cable to connect. it worked perfectly with my device till yesterday.
i thought that may be the cable is not working but when i used it to connect my nokia device it worked perfectly
i dont want to flash any custom rom or any thing
please help
i will press thanks for sure for useful help
Click to expand...
Click to collapse
Try changing ports..and that app must have been for both pc and phone..u removed both?
abhishekr700 said:
I have a galaxy y model gt-s5360
till yesterday it was connecing to my pc
today i installed a app called mobiler to take control of it via pc
after that whenever i connect my phone to pc it just charges and doesnt show usb connected
i removed mobiler app then connected but then also it only charges and not show usb connected
i use a nokia data cable to connect. it worked perfectly with my device till yesterday.
i thought that may be the cable is not working but when i used it to connect my nokia device it worked perfectly
i dont want to flash any custom rom or any thing
please help
i will press thanks for sure for useful help
Click to expand...
Click to collapse
uninstall the samsung usb driver n reinstall it again then try to connect it....r else reboot ur phone n then connect...i also faced tis prb...but after trying to reboot my phone n reinstalled the driver its wrks fine now.....
Sent from my GT-S5360 using Tapatalk 2
EatHeat said:
Try changing ports..and that app must have been for both pc and phone..u removed both?
Click to expand...
Click to collapse
yes i removed both
abhishekr700 said:
yes i removed both
Click to expand...
Click to collapse
Reboot ur SGY and try
solved!!
yippeee!!!!!!!!!
i reinstalled drivers,removes the software fom pc and phone,then rebooted my sgy
and it started showing usb connected
thanks!!!!!!!!!!
abhishekr700 said:
yippeee!!!!!!!!!
i reinstalled drivers,removes the software fom pc and phone,then rebooted my sgy
and it started showing usb connected
thanks!!!!!!!!!!
Click to expand...
Click to collapse
tat is wat i told first....cause i also faced tat issue.....
Sent from my GT-S5360 using Tapatalk 2

[Q] Unable to connect Galaxy Note3 N9005 to PC

I'm having trouble connecting my N9005 to my pc using Windows8. The problem is it does not recognize the phone's storage and is not able to mount it.
I've tried installing Samsung Universal USB Drivers to no avail.
My laptop only has USB2 ports and if I'm correct N9005 utilizes USB v3. Could it be the cause?
I also have the same problem in Ubuntu.
I also tried Samsung Kies and it doesn't work either.
Upon connecting, my PC recognizes that the phone's been connected but it's not able to mount the storage.
NoobSibot said:
I'm having trouble connecting my N9005 to my pc using Windows8. The problem is it does not recognize the phone's storage and is not able to mount it.
I've tried installing Samsung Universal USB Drivers to no avail.
My laptop only has USB2 ports and if I'm correct N9005 utilizes USB v3. Could it be the cause?
I also have the same problem in Ubuntu.
I also tried Samsung Kies and it doesn't work either.
Upon connecting, my PC recognizes that the phone's been connected but it's not able to mount the storage.
Click to expand...
Click to collapse
The Note 3 mounts as an MTP drive. Make sure you have it selected under the drive connection settings on your phone.
In some cases enabling USB Debugging in Developer Settings would allow for the USB to mount.
nicholaschum said:
The Note 3 mounts as an MTP drive. Make sure you have it selected under the drive connection settings on your phone.
In some cases enabling USB Debugging in Developer Settings would allow for the USB to mount.
Click to expand...
Click to collapse
No difference there my friend.
NoobSibot said:
No difference there my friend.
Click to expand...
Click to collapse
By any chance do you have any unknown devices listed in the Computer Management of your computer?
My Note 3 mounts normally
nicholaschum said:
By any chance do you have any unknown devices listed in the Computer Management of your computer?
My Note 3 mounts normally
Click to expand...
Click to collapse
I don't know what really happened but this last time I connected the device, it mounted normally!
But there's still an unknown Mass Storage Controller in my Device Manager.
unable to connect
Hi,
Perhaps W8 assigned the wrong driver...or a bad / damaged usb cable(?)
Try a system restore to an earlier date
I allways connect my mobile device thru wifi and it's fine
Cheers,
USB3 is backwards compatible with USB2, don't worry about that.
Did you try another cable? You can use any microUSB 2.0 cable, it fits into the right side of the USB port. (the small left bit is the USB3 part.)
Did you unlock the screen when you connect the phone? It can't mount the storage, if you use a lockscreen setting other than none or swipe, until you unlock the screen.
Send From My Samsung Galaxy Note 3 N9005 Using Tapatalk
Hello ShadowLea,
I'm having the same problem on my Samsung Note 3 SM-N9005: "USB device not recognized One of the usb devices connected to this computer has malfunctioned...." when I connect it to my USB3 on my laptop.
I tried the toothpick solution (lifting the tongue of the USB connector on my phone), I tried powering down the Laptop and waiting for 30 seconds to fullly discharge the capacitors, I tried changing 3 different USB cables. I tried different USB ports on Laptop (on USB3 I reiceve the error on the remaining 2 USB2 ports the error does not appear but the phone is not seen by Kies nor Odin.
BTW, FYI, the phone is also having battery charging issues: it only charges if pluggged into the laptop and won't charge if connected to the mains via wall charger (tried 3 different chargers, cables, mains sockets: all work with other devices).
I'm trying to flash a new ROM to try to fix the battery chargin problem but if Odin can't recognize the device...
Also, the dial pad code *#7284# which should give access to the Phone Utility (USB settings) is not working - all other dial pad codes work.
ascanio1 said:
Hello ShadowLea,
I'm having the same problem on my Samsung Note 3 SM-N9005: "USB device not recognized One of the usb devices connected to this computer has malfunctioned...." when I connect it to my USB3 on my laptop.
I tried the toothpick solution (lifting the tongue of the USB connector on my phone), I tried powering down the Laptop and waiting for 30 seconds to fullly discharge the capacitors, I tried changing 3 different USB cables. I tried different USB ports on Laptop (on USB3 I reiceve the error on the remaining 2 USB2 ports the error does not appear but the phone is not seen by Kies nor Odin.
BTW, FYI, the phone is also having battery charging issues: it only charges if pluggged into the laptop and won't charge if connected to the mains via wall charger (tried 3 different chargers, cables, mains sockets: all work with other devices).
I'm trying to flash a new ROM to try to fix the battery charging problem but if Odin can't recognize the device...
Also, the dial pad code *#7284# which should give access to the Phone Utility (USB settings) is not working - all other dial pad codes work.
Click to expand...
Click to collapse
im having the same problem..i try to connect my note 3 via USB cable and is not reading the phone... But for me it start happening after I install the X-NOTE build 18... any Idea how to fix this? Or a link?
xganonx said:
im having the same problem..i try to connect my note 3 via USB cable and is not reading the phone... But for me it start happening after I install the X-NOTE build 18... any Idea how to fix this? Or a link?
Click to expand...
Click to collapse
Hi, I have the same problem with X-Note 18. I tried already all stuff, Odin can see my phone but Kies and any other connection option doesnt help
any update?
any update on this? having the same problem, is it due to xnote?
cussyandrew said:
any update on this? having the same problem, is it due to xnote?
Click to expand...
Click to collapse
Nope, X-Note is fine and I'm using v16 right now without problems.
What I think fixed my problem was using a screwdriver on the usb port on the phone.
I tightened the screws a little bit and it was fine after that.
NoobSibot said:
Nope, X-Note is fine and I'm using v16 right now without problems.
What I think fixed my problem was using a screwdriver on the usb port on the phone.
I tightened the screws a little bit and it was fine after that.
Click to expand...
Click to collapse
well it was working fine on xnote 13, however its been giving me this problem since i updated to xnote 18!!
---------- Post added at 04:21 AM ---------- Previous post was at 04:21 AM ----------
NoobSibot said:
Nope, X-Note is fine and I'm using v16 right now without problems.
What I think fixed my problem was using a screwdriver on the usb port on the phone.
I tightened the screws a little bit and it was fine after that.
Click to expand...
Click to collapse
which screws are you talking about btw?
ive found countless times its a duff or cheap micro USB cable.
if you have been using the genuine Samsung one then it may be faulty. But try another cable.
does any other phone connect ok with the same cable?:good:
I had a similar issue with my note 2 a while back
Sent from my GT-N7100 using XDA Premium 4 mobile app
cussyandrew said:
well it was working fine on xnote 13, however its been giving me this problem since i updated to xnote 18!!
---------- Post added at 04:21 AM ---------- Previous post was at 04:21 AM ----------
which screws are you talking about btw?
Click to expand...
Click to collapse
The ones on the USB port when you remove the back cover.
aladinliverpool said:
ive found countless times its a duff or cheap micro USB cable.
if you have been using the genuine Samsung one then it may be faulty. But try another cable.
does any other phone connect ok with the same cable?:good:
Click to expand...
Click to collapse
No it doesn't connect with any other cable, it charges fine though :/
This problem has already been addressed and solved. Its a problem in the kernel. Download a custom kernel if your using X-note 18.
Wallah, Problem fixed
Dizy801 said:
This problem has already been addressed and solved. Its a problem in the kernel. Download a custom kernel if your using X-note 18.
Wallah, Problem fixed
Click to expand...
Click to collapse
can you please provide links to theses custom kernels?.. im not sure which ones to install
moh277 said:
can you please provide links to theses custom kernels?.. im not sure which ones to install
Click to expand...
Click to collapse
Go download x-note v20. they fixed the problem.
HTML:
http://www.nonsolosmartphone.it/x-note-build-18-0-n9005-nf4-t9278.html

Categories

Resources