i flashed cwm nd flashed 2 3 roms now unable to reach recovery help p[lease..........:crying::crying::crying::crying::crying::crying::crying::crying:
vishuhtc said:
i flashed cwm nd flashed 2 3 roms now unable to reach recovery help p[lease..........:crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
are you able to access download mode??? If yes then get a odin package for your device and flash it.
amit34521 said:
are you able to access download mode??? If yes then get a odin package for your device and flash it.
Click to expand...
Click to collapse
how to access download mode
maybe the battery is low..charge it full...then you can enter recovery
sasuke150 said:
maybe the battery is low..charge it full...then you can enter recovery
Click to expand...
Click to collapse
battery is more than 80 n% now when i am trying to charge also only samsung screen shows up
it's bootlop, you just flash stock rom via odin....
see the sticky post in development to do that !
vishuhtc said:
battery is more than 80 n% now when i am trying to charge also only samsung screen shows up
Click to expand...
Click to collapse
VillaVor said:
it's bootlop, you just flash stock rom via odin....
see the sticky post in development to do that !
Click to expand...
Click to collapse
i am unable to go to download mode or recovery mode even if i charge mobile also samsung logo screen is only showing up:crying:
vishuhtc said:
i am unable to go to download mode or recovery mode even if i charge mobile also samsung logo screen is only showing up:crying:
Click to expand...
Click to collapse
No need to cry,. Even i have faced that..
First find out a stock Rom using odin mode then
Switch off your mobile
Then press Menu+Vol Down+Power button.. Now odin mode ll start
Now connect ur mobile to pc thru usb cable
Now open odin Sw, the system ll automatially detects ur device(follow the software installation process)
Then use the downloaded stock Rom to flash ur mobile.
It may take only 5 to 10 minutes for installation..hope it ll works for u.
Sorry for my English if u feel hard to understand
Sent from my GT-S5360 using xda app-developers app
Dont use skin1980 or cwm bla bla
For flashing
Use CWM-Madteam-Galaxy-Y for better.
Sent from my GT-S5360 using xda premium
Unplug charger, press Home + Vol Down + Power Button together
Hit Thanks If I Helped You
vishuhtc said:
i am unable to go to download mode or recovery mode even if i charge mobile also samsung logo screen is only showing up:crying:
Click to expand...
Click to collapse
- download the required firmware bundle ( download ur needed firmware bundle in this link [Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages )
- install Kies, or Samsung driver pack
- unzip the package, You'll get 3 *.tar (or tar.md5) files
- download Odin3 1.84 or 1.85 (click here)
- stop Kies
- stop all active ADB sessions
- start odin
- do backup of your data and apps
- charge your SGY at least 75%
- remove SGY from USB or charger
- start the device in Download mode
*HERES HOW TO GO TO DOWNLOAD MODE*
-power off Your SGY
- wait 30 sec
- Press Vol Down, Home, and Power at the same time
- When (about 5 sec) Warning screen appears, release Volume Down and Power, then (a bit later) Home
- press Vol Up (You'll get Odin mode screen)
*NOW IN ODIN PC(
- Browse the 3 tar files to odin PDA=PDA_xxxx.tar, PHONE=MODEM_ or PHONE_xxxxx.tar, CSC=CSC_xxxxx.tar
- no PIT and/or BOOT files required - leave it empty!
- leave all other fields and checkboxes default!
- connect your phone, You must see yellow 0:[COMxx] in the first ID:COM and "Added" in the message box
- Start flashing by the START button.
- flashing will start immediately, see the progress in the message box, and progress bar on the phone
- Wait 1-3 minutes, until green PASS! in the upper left
- SGY will reboot, leave it as is for 2-5 minutes until startup finishes
SOURCE:[Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages
Download this stock Rom(2.3.6 DXKJ3)..and flash through Odin and go to download mode by pressing simultaneously Vol. down+power+home
Hit thanx if u like my work
74M3NUMB3RS said:
- download the required firmware bundle ( download ur needed firmware bundle in this link [Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages )
- install Kies, or Samsung driver pack
- unzip the package, You'll get 3 *.tar (or tar.md5) files
- download Odin3 1.84 or 1.85 (click here)
- stop Kies
- stop all active ADB sessions
- start odin
- do backup of your data and apps
- charge your SGY at least 75%
- remove SGY from USB or charger
- start the device in Download mode
*HERES HOW TO GO TO DOWNLOAD MODE*
-power off Your SGY
- wait 30 sec
- Press Vol Down, Home, and Power at the same time
- When (about 5 sec) Warning screen appears, release Volume Down and Power, then (a bit later) Home
- press Vol Up (You'll get Odin mode screen)
*NOW IN ODIN PC(
- Browse the 3 tar files to odin PDA=PDA_xxxx.tar, PHONE=MODEM_ or PHONE_xxxxx.tar, CSC=CSC_xxxxx.tar
- no PIT and/or BOOT files required - leave it empty!
- leave all other fields and checkboxes default!
- connect your phone, You must see yellow 0:[COMxx] in the first ID:COM and "Added" in the message box
- Start flashing by the START button.
- flashing will start immediately, see the progress in the message box, and progress bar on the phone
- Wait 1-3 minutes, until green PASS! in the upper left
- SGY will reboot, leave it as is for 2-5 minutes until startup finishes
SOURCE:[Stock][ROM][Odin] Galaxy Y S5360 flashable firmware packages
Click to expand...
Click to collapse
i tried odin mode but when my device is connected it says device cannot start error message
one of the devices connected is malfunctioned is the error message i am constantly getting
never mind i successfully installed stock firmware thankyou all for your help
vishuhtc said:
i tried odin mode but when my device is connected it says device cannot start error message
one of the devices connected is malfunctioned is the error message i am constantly getting
never mind i successfully installed stock firmware thankyou all for your help
Click to expand...
Click to collapse
please tell me how could you solve this problem and flash stock rom without using odin? i'm unable to access recovery mode and my device is not readable on pc even with drivers installed
If your device is not recognised try to install drivers again if its still their it might be hard brick
So you need jig cable or go to service center in india they will charge 170 rupee
i am so perfect at sleeping i can do it with my eyes closed
sent from -
xeonzlot.blogspot.com
I too faced the same.problem ...
where I was not able to go to recovery....
and my phone was also not detected in pc...It was fixed with these silly steps...
I did this:
Frst I uninstalled the Samsung drivers...
restarted the pc...
Installed the drifers...
then I used another USB cable and connected to the USB slot behind one of my pc...
then went to download mode and the phone was detected and also successfully flashed stock Rom.....
Hope this works for you too...
Related
i have problem with SGS i9000 i go to in recovery mode cwm i upgarde it without wipe it
with this rom (I9000_Alpha_HTC_Sense_v0.5)
now my sgs not go in 2e recovery with 3(volume up+home+power)it is not woring yet
main screen (galaxy GT-i9000) appear but it just restart when boot in 3 or 5 sec and usb plugin not long::: in 3sec only after that disconnet
now im not have in sgs software (rom) and 3button not working and not have 2e recovery and CWM all just only have boot screen (galaxy GT-i9000) 3secnd restart sgs
ithink it understand my problem
plz quickly solve my problem
Go to download mode (volume down+home+power) and flash any stock rom with repartition checked. your phone should be okey
Remove battery and try again.
Can you get into download mode ??
If so flash a stock rom with pit 512 and repartitioning checked via Odin .
The rom you installed is Alpha that means not ready for Beta full of bugs use only if you know what you are doing .
ROM does not work is what the post says where it says must read .
jje
i do all
i use odin
i remove battery
im not have (software now ,2e recovery and 3button v up+home+power not working to go in recovery mode)
but my sgs when i connect it with pc usb plugin 3sec and restart
If you have any other ROM zip on your SD card then just flash speedmod kernel with odin to get CWM recovery back (see my signature for link)
If you don't have any other rom zip to update with CWM recovery then you will need to flash a stock rom with odin.
i try with odin but useless
if you have program anther odin give me plz
may be try the reset button, which in the middle of the cam and speaker, search in forum for details
Sent from my GT-I9000 using XDA App
i'll be crazy with this SGSi9000
i want help
Which part of using odin you didnt understand? just go to download (vol DOWN+home+power) mode and flash with pit.
Sent from my GT-I9000 using Tapatalk
i'll be crazy with this SGSi9000
i want help
You may be better off paying a service centre to fix as you seem incapable of following instructions .
jje
I tried using the 3buttons (volume up+home+power)it is not responding
I can not inter to recovery mode or download moded
always my sgs restart in 5sec when i run sgs
recovery mode does not respond
I think it's somehow deleted of the device
warning, I didn't try #2 before, but may save you if you don't have JIG
1. JIG
2.
Originally Posted by Yovi
Wassup all...
Back story
I managed to brick my SGS within 24 hours of getting it:
My computer wouldn't (and still doesn't) recognise my phone (sometimes for a few minutes at a time) when I plugged it in.
I thought it would be a great idea to try flashing from to Froyo from Eclair anyway, and while it was going on, my pc disconnected the phone and bricked it COMPLETELY... I pulled the bat, tried all the 3 button combos (they worked before I flashed, I tested to make sure), and nothing worked...
I spent hours looking through the forums and the only advice I saw was to try a jig, before reading that for a 100% bricked phone it would not work...
What to do
- Take of the back case of your SGS, inbetween the camera and the speaker, you will see a little circular hole...
- Take a pin/pen and poke it...
- Hold the hole pressed in and press the 3 button combo for download/recovery mode
It should go into download mode and from there you can flash on a fresh firmware!
I saw NO mention of this hard reset's existence anywhere on the website at all, it worked perfectly for me!
kasserx said:
I tried using the 3buttons (volume up+home+power)it is not responding
I can not inter to recovery mode or download moded
always my sgs restart in 5sec when i run sgs
recovery mode does not respond
I think it's somehow deleted of the device
Click to expand...
Click to collapse
i tell you,,,
its not volume up+home+power
but volume down+home+power (download mode)
i hade this problem once,,,
i can,t go to recovery mode, but i still able to go to download mode..
xfakexbloodx said:
i tell you,,,
its not volume up+home+power
but volume down+home+power (download mode)
i hade this problem once,,,
i can,t go to recovery mode, but i still able to go to download mode..
Click to expand...
Click to collapse
unless you mess with your bootloader (in this case you didn't) you must be able to go into download mode and flash a fresh odin rom with pit 512 and repartition enabled
hello guys,
i rooted ma frds SGY, and i tried installing custom ROM USSR v5 in SGY by the given procedure on internet.
but i wiped the data and catch form recovery instead of CWM and
after rebooting the phone it stucked on SGY logo..
please help me out guys m noob..
shreenathSV said:
hello guys,
i rooted ma frds SGY, and i tried installing custom ROM USSR v5 in SGY by the given procedure on internet.
but i wiped the data and catch form recovery instead of CWM and
after rebooting the phone it stucked on SGY logo..
please help me out guys m noob..
Click to expand...
Click to collapse
REQUIREMENTS: ODIN 1.85 ( JUST DOWNLOAD 1.85 ) FIRMWARES (LATEST OR DUNNO) FIRMWARES CLICK HERE SAMSUNG DRIVERS and Samsung Kies...
(ONCE U DOWNLOAD UR FIRMWARE..UNPACK IT)
(ONCE U UNPACK U WILL HAVE 3 FILES PDA.BLAHBLAH.tar.md5,CSC.BLAHBLAH.tar.md5 AND MODEM.BLAHBLAH.tar.md5)
1. OPEN ODIN...
2. CLICK THE PDA BOX THEN CHOOSE THE PDA_S5360_XXXX.tar.md5 (THAT XXXX IS THE FIRMWARE VERSION)
3. CLICK THE PHONE BOX THEN CHOOSE THE MODEM_S5360_XXXX.tar.md5 (THAT XXXX IS THE FIRMWARE VERSION)
4. CLICK THE CSC BOX THEN CHOOSE THE CSC_S5360_XXXXX.tar.md5 (THAT XXXXX IS THE DUNNO)
5. NOW PUT YOUR PHONE TO DOWNLOAD MODE
(TO GO TO DOWNLOAD MODE.....PRESS AND HOLD VOLUME DOWN BUTTON,HOME BUTTON AND POWER BUTTON)
(ENOUGH PRESSING AND HOLDING THE VOLUME DOWN BUTTON,HOME BUTTON AND POWER BUTTON WHEN U SEE THE WARNING) ( LEAVE ALL TO DEFAULT EXCEPT THE PDA,PHONE AND CSC )
6 CONTINUE TO DOWNLOAD MODE BY PRESSING VOLUME UP BUTTON
7. UR NOW IN DOWNLOAD MODE...
8. GET YOUR USB CONNECTOR AND PLUG IT TO YOUR PHONE AND TO PC....
9. U WILL SEE 0:[COMXX] ( XX IS ANY NUMBER )
10. PRESS START....
11. YOUR NOW IN STOCK ROM...ENJOY
ITS MY FIRST TIME HELPING PLEASE GIVE ME A THANKS LOL
If u are allow to access the recovery, try to rewipe data & cache
Sent from my GT-S5360 using xda premium
not workin
Thanx for rly.
I did the same way u mentioned but when i press the start button it shows FAIL in upper left box.
And nothing happens. What should i do now?
i download S5360_DDLA3_ODDLA2_DDLA2 (revision 1) this version of firmware package.
hey I need help with my tablet it was working fine the the other day but now it went off and won't come back on the charging screen appears but there is no yellow loading bar showing its just a empty battery icon I have left it in over night with no luck it also won't turn on passed the charging screen so I cannot get onto download mode to flash stock ROM with Odin ? I have pulled the battery left it out for good few hours still no luck its still the same any help would be Appreciated. Thanks
I have 2 suggestions:
1. Try to switch off your tab and then try to flash an official ROM ( Hold POWER BUTTON for nearly 10 sec to Switch off your tab)
2. Are you able to go to Download mode?
>If yes, then Download an official firmware from Samsung, your tab drivers or simply install KIES and also Download ODIN v1.85
>Install ODIN
>Go to download mode ( Pressing POWER + VOLUME DOWN button simultaneously till you see the Samsung logo)
>Run Odin and then Connect your Tab to PC and flash the firmware by using ODIN
DONE :sly:
Hi
For the beginning i want to say thx to the people who will try help me.
Samsung Note 3 SM-9005
Rom: NB3 4.4.2 (kitkat)
I should post it as a reply to the chainfire's post on cf auto root but i can't cause i am a new on xda (and he didn't allow me )
So what is my problem ?
When i tried root with CF all is ok but when odin say 'PASS' there is no recovery boot (the install process, the red android logo)
What i have ? > After my flash my phone try to boot (with Se Enforcing + 2 other stuff blue red and yellow i guess) but my phone can't boot (yes even boot) he only reset and try re-booting.
chainfire's say
*NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process.*
Click to expand...
Click to collapse
So i tried it, i unchecked the auto-boot, flash my phone pull the battery and press the button (without the battery), and after my phone turn off.
When i turn on >> same issue boot loop all time
And to have access on the phone i must go on the downlaod mode and click restard phone...
Well if u could help me .... 90% of my app require root x) :laugh:
Is this the file you used? There's 2 files, one for 4.4 and the other for 4.3. Try flashing the file again.
Yes i used this file
i forgot to say that kingo root is so buged i mean i try also to root with him (on 1s)
He put my phone on download, install the recovery ect
Result: a fake root, in fact even if i have SuperSU (he installed) He said me that i have no binnary installed
I also checked on "Root Checked" no root here
BUT on download mode: custom os + custom binnary
And his chinese recovery work
1 hour ago i used my GN2 to see if maybe it's my computed who have issue with kingo root
Result: Root perfectly my phone
I also forgot to say that i used different odin (1.85,3.09 ect) on admin
And i tried the NA6's rom (maybe was the rom ^^' but nop still no root)
French's user said:
Hi
So i tried it, i unchecked the auto-boot, flash my phone pull the battery and press the button (without the battery), and after my phone turn off.
When i turn on >> same issue boot loop all time
And to have access on the phone i must go on the downlaod mode and click restard phone...
Well if u could help me .... 90% of my app require root x) :laugh:
Click to expand...
Click to collapse
I re-read your reply and I'm a little confused. Did you pressed all buttons after removing the battery? Also, there is no restart phone in download mode, you can only get out of download mode by pressing power button for a few seconds or remove the battery.
Lastly, maybe check you have the correct samsung usb drivers and reactivation lock is off.
hey_joe said:
I re-read your reply and I'm a little confused. Did you pressed all buttons after removing the battery? Also, there is no restart phone in download mode, you can only get out of download mode by pressing power button for a few seconds or remove the battery.
Lastly, maybe check you have the correct samsung usb drivers and reactivation lock is off.
Click to expand...
Click to collapse
Well i know but i didn't even really understand the process to manually boot the recovery (the chainfire's quote)
what i did ? i flash my phone when odin say "reset" i just pull the battery on the table and next press buttons (Volup+home+power)
My phone turn off i replace the battery and i get the booting loop
Maybe my way to process is wrong, i don't even know chainfire don't really explain in details the way to do it....
For the driver i deleted all and re-installed by kingo but in fact all time my device is detected (in all mode) and COM if alway here (also the flash is correct)
I think maybe my process is badly done (maybe i can't understand cause im french)
Here's how I would normally do it.
- download the file and extract to a folder/location of choice
- put phone in download mode by pressing power + vol down + home button all at the same time until something comes up on the screen then let go of the buttons then press vol up then connect to usb on pc
- go to where you extracted the downloaded file, open odin and put the tar.md5 file in the PDA slot and click start
Odin will flash file and automatically restart to apply root ( red android with red letters ) then restart again to android.
OMG dude that work thx to you :laugh::laugh::laugh::laugh::laugh::laugh:
Ok the last post i mean i didn't understand the process of the boot recovery manually (with autoboot unchecked)
But i least this time i used a different thing- what ?- A nokia usb cable
And this time that work and im sure before i did all u said to me.
I worked on 2 night x)x)
Anyway dude thx to help me
No problem.
Enjoy your phone :good:
Help ... I update my mobile lollipop, and time to reboot he called again in download mode, presenting the message in red "Could not the normal boot." I can not go into recovery mode, always turn on this screen .. . PC does not recognize when I conecto.como solve this?:crying:
Laelson said:
Help ... I update my mobile lollipop, and time to reboot he called again in download mode, presenting the message in red "Could not the normal boot." I can not go into recovery mode, always turn on this screen .. . PC does not recognize when I conecto.como solve this?:crying:
Click to expand...
Click to collapse
This problem happens to me when you boot your device it goes to download mode and PC can't detect PC am I right then you need to do pull the battery then press volume dow n ,+ home + power simultaneously then press volume up now this odin must be detect your phone odin can't detet your phone at normal boot bcoz all files are not loaded at the time but when you will boot download mode by pressing odin will detet:thumbup:
Sent from my SM-G530H using XDA Free mobile app
I tried this procedure, but to no avail .. not so Odin can recognize
https://www.youtube.com/watch?v=YO7TVY2UXEY
That's what he said is not it?
AndroidFire said:
This problem happens to me when you boot your device it goes to download mode and PC can't detect PC am I right then you need to do pull the battery then press volume dow n ,+ home + power simultaneously then press volume up now this odin must be detect your phone odin can't detet your phone at normal boot bcoz all files are not loaded at the time but when you will boot download mode by pressing odin will detet:thumbup:
Sent from my SM-G530H using XDA Free mobile app
Click to expand...
Click to collapse
I tried this procedure, but to no avail .. not so Odin can recognize
https://www.youtube.com/watch?v=YO7TVY2UXEY
That's what he said is not it?