i have problem with SGS i9000 i go to in recovery mode cwm i upgarde it without wipe it
with this rom (I9000_Alpha_HTC_Sense_v0.5)
now my sgs not go in 2e recovery with 3(volume up+home+power)it is not woring yet
main screen (galaxy GT-i9000) appear but it just restart when boot in 3 or 5 sec and usb plugin not long::: in 3sec only after that disconnet
now im not have in sgs software (rom) and 3button not working and not have 2e recovery and CWM all just only have boot screen (galaxy GT-i9000) 3secnd restart sgs
ithink it understand my problem
plz quickly solve my problem
Go to download mode (volume down+home+power) and flash any stock rom with repartition checked. your phone should be okey
Remove battery and try again.
Can you get into download mode ??
If so flash a stock rom with pit 512 and repartitioning checked via Odin .
The rom you installed is Alpha that means not ready for Beta full of bugs use only if you know what you are doing .
ROM does not work is what the post says where it says must read .
jje
i do all
i use odin
i remove battery
im not have (software now ,2e recovery and 3button v up+home+power not working to go in recovery mode)
but my sgs when i connect it with pc usb plugin 3sec and restart
If you have any other ROM zip on your SD card then just flash speedmod kernel with odin to get CWM recovery back (see my signature for link)
If you don't have any other rom zip to update with CWM recovery then you will need to flash a stock rom with odin.
i try with odin but useless
if you have program anther odin give me plz
may be try the reset button, which in the middle of the cam and speaker, search in forum for details
Sent from my GT-I9000 using XDA App
i'll be crazy with this SGSi9000
i want help
Which part of using odin you didnt understand? just go to download (vol DOWN+home+power) mode and flash with pit.
Sent from my GT-I9000 using Tapatalk
i'll be crazy with this SGSi9000
i want help
You may be better off paying a service centre to fix as you seem incapable of following instructions .
jje
I tried using the 3buttons (volume up+home+power)it is not responding
I can not inter to recovery mode or download moded
always my sgs restart in 5sec when i run sgs
recovery mode does not respond
I think it's somehow deleted of the device
warning, I didn't try #2 before, but may save you if you don't have JIG
1. JIG
2.
Originally Posted by Yovi
Wassup all...
Back story
I managed to brick my SGS within 24 hours of getting it:
My computer wouldn't (and still doesn't) recognise my phone (sometimes for a few minutes at a time) when I plugged it in.
I thought it would be a great idea to try flashing from to Froyo from Eclair anyway, and while it was going on, my pc disconnected the phone and bricked it COMPLETELY... I pulled the bat, tried all the 3 button combos (they worked before I flashed, I tested to make sure), and nothing worked...
I spent hours looking through the forums and the only advice I saw was to try a jig, before reading that for a 100% bricked phone it would not work...
What to do
- Take of the back case of your SGS, inbetween the camera and the speaker, you will see a little circular hole...
- Take a pin/pen and poke it...
- Hold the hole pressed in and press the 3 button combo for download/recovery mode
It should go into download mode and from there you can flash on a fresh firmware!
I saw NO mention of this hard reset's existence anywhere on the website at all, it worked perfectly for me!
kasserx said:
I tried using the 3buttons (volume up+home+power)it is not responding
I can not inter to recovery mode or download moded
always my sgs restart in 5sec when i run sgs
recovery mode does not respond
I think it's somehow deleted of the device
Click to expand...
Click to collapse
i tell you,,,
its not volume up+home+power
but volume down+home+power (download mode)
i hade this problem once,,,
i can,t go to recovery mode, but i still able to go to download mode..
xfakexbloodx said:
i tell you,,,
its not volume up+home+power
but volume down+home+power (download mode)
i hade this problem once,,,
i can,t go to recovery mode, but i still able to go to download mode..
Click to expand...
Click to collapse
unless you mess with your bootloader (in this case you didn't) you must be able to go into download mode and flash a fresh odin rom with pit 512 and repartition enabled
Related
I got an error screen after trying to update my kernel. My phone's 3 button recovery doesn't work so i cannot go back to download mode to get it working again. Also i cant get it to go to download mode through SDK manager either. The phone doesn't connect to the computer anymore. Every time i open it it comes up with that error screen and doesn't go. Ive tried everything, taken out the battery and leaving it out for a while putting it back in still nothing. Can someone please help i cant use my phone anymore. Thanks in advance. Azzy
First requirement is Download mode not Recovery mode Home + Vol Down + PWR
That fails you need the download mode recovery jig .
http://forum.xda-developers.com/showthread.php?t=819551
Followed by a flash of stock rom via Odin .
MUST READ
http://forum.xda-developers.com/showthread.php?t=723596
jje
i have been doing alot of rom upgrade via clockwork and this is the first time my phone brick.
i tried the vol up, vol down and power button at the same time and it just brings me to "vibrant samsung" screen.
i also tried removing battery, hold vol up, vol down and insert battery, it goes to a screen where it says downloading. but didnt move for hours.....
and if i switch on normally, it just keep restarting on vibrant screen.
how do i solve this problem?
You have to use odin to flash back to stock....
That's what the download screen is for.
From that downloading mode screen you can odin it back to stock.
http://forum.xda-developers.com/showthread.php?t=734475
lazylilsnoop said:
i have been doing alot of rom upgrade via clockwork and this is the first time my phone brick.
i tried the vol up, vol down and power button at the same time and it just brings me to "vibrant samsung" screen.
i also tried removing battery, hold vol up, vol down and insert battery, it goes to a screen where it says downloading. but didnt move for hours.....
and if i switch on normally, it just keep restarting on vibrant screen.
how do i solve this problem?
Click to expand...
Click to collapse
removing battery, hold vol up, vol down and insert battery, Have Odin up and running then plug in your cable. Then let go of the button
yea, i found that page too. but anyone can get the link working?
thanx!!!
lazylilsnoop said:
yea, i found that page too. but anyone can get the link working?
thanx!!!
Click to expand...
Click to collapse
can't see the page?
here i quoted the OP
justanothercrowd said:
T959 (US T-Mobile version of the Galaxy S) Firmware that can be flashed through Odin to restore all partitions to the way your phone was shipped to you.
WARNING!!! THIS WILL WIPE ANY DATA ON YOUR DEVICE, IT WILL REPLACE YOUR BASEBAND, KERNEL, RECOVERY AND OS.
JFD ODIN Images from Samsung (PDA)
www.justanotherdev.slackdev.com/T959UVJFD.tar
MD5:632730f6b637f53e5b10e5cbc8b966a7
512 PIT File (PIT Extract first!)
www.justanotherdev.slackdev.com/s1_odin_20100512.rar
MD5:b5628c8e183fdd8f4c703321ca40e33a
ODIN
www.justanotherdev.slackdev.com/Odin3.rar
ALL 3 Files plues the root update.zip
http://tinyurl.com/2bc5b6r
thx to KopyKatKiller
INSTRUCTIONS!
1.Your Device must be in DOWNLOAD mode to use ODIN.
2.Get your phone into Download mode by holding vol down and power.
3.THEN connect your phone to the USB. (some folks have had luck doing it in reverse..connecting the USB then Power and vol down)
4.Open Odin and load each file with it's corresponding field..PIT,PDA,CSC etc. (In this case we just use the PDA and PIT)
5.Don't check anything else, the other two boxes should be checked by default (Auto Reboot and Reset Time)
6.Hit "start"! be patient!
NOTE: COM3 worked fine for me. COM should not matter as long as you are using the correct drivers.
Finally we get some U.S love from samsung firmwares.
For those looking the Nandroid method it is in the post below but only recovers ,system, data, cache and datadata. Not your kernel/recovery or BASEBAND/RADIO (Modem.bin)
Thx to all helping work on the Vibrant. Especially Youneek, Scepterr, MS_Guru, Wes Garner, rhcp0112345, and anyone I may have forgot.
Twitter
Click to expand...
Click to collapse
sorry, what i meant was the link to download odin.
all link by "justanothercrowd" is not working
Get in download mode like you have before then..
Use the Vibrant Toolkit and then click Flash to Stock and then press "Reboot into Download + Start ODIN" (ignore the "Check that USB debugging mode is enabled" because you're already in download mode), it'll open up ODIN and then follow the instructions for using ODIN.
http://forum.xda-developers.com/showthread.php?t=954509
From bay_wolf's post, some information about setup of odin,
When you select the PIT and PDA files, it should default to the installed location and if not then browse to where you installed AIO Vibrant Toolbox as the files are in there.
Click to expand...
Click to collapse
Note: there are instructions on how to use odin on the Flash To Stock screen. All the files you'll need will be downloaded with the download for the vibrant toolkit.
I've had this problem and freaked when i couldn't find a download to Odin, so I used the vibrant toolkit and it worked.
Here's the download link from his thread (credit to bay_wolf): http://www.multiupload.com/G3LUINMUE0
THANX ALOT GUYS!!!!!!!
now gonna start to update it to http://forum.xda-developers.com/showthread.php?t=1021383
just another quick question, which rom are you guys using? i came from bionix rom to the simply galaxy v3.0, it doesnt seem to b fast and smooth. any other recommended rom?
Try some EDT roms...beast...Malice, Trigger, or Bi Winning.
Flash back to stock too.
I use simply Galaxy with Crysis Sensation theme (TWiz 4.0 + tweaks) & DamianGTO Gold v2.0 kernel (not available on XDA). Then use an app called Blade buddy to set up all Stagefright tweaks (under advanced settings) and debug.sw.hf then menu > apply > save. Quadrant scores 2200+.
Trigger is really good (2.2) and there's a cool new theme called Vibrant HD for it.
Haven't tried CM7 but it looks cool, lots of themes with it.
I found an update on kies so i looked around and saw that i had to unroot and un lagfix(oclf) so i did that and started the update, an error stopped the phone from backing up so i carried on without a backup because i dont have anything thats very important on my phone. The update file downloaded and i got to the point where you have to unplug the phone and then plug it back in. I did that and when it turned back on it reached the galaxy s screen then went black and now it just vibrates every couple of minutes.
i already tried taking out battery, sim card, sd card
any ideas?
Sounds like you need Odin.
whats odin?
How does it work?
Factory reset first .
# Also firmware Kies emergency firmware recover .
Or Samsung service centre .
Failure at boot is usually wrong firmware or lagfix on .
ODIN is an alternative unofficial method of installing firmware on your phone .
jje
how can i factorz reset without being able to boot up
how can i use odin to flash samsung firmware back onto my phone
try using the 3 button combo method entering recovery mode by switching your phone off, press up+home+power key for a couple of seconds then it will enter recovery mode, try making a factory reset there, then reboot your phone, try if it will work, if it still doesn't work, then go to the development section and read how to flash a new firmware via odin then.
ive tried the three button combo several times but it just keeps on trying to boot, i think its one of the galaxy s phones that has it disabled
any other way to enter recovery mode
Can you get into download mode ??
Power + Vol Down + Home .
If so read this POST 2 .
http://forum.xda-developers.com/showthread.php?t=723596
jje
cant get into download mode either, is their any way to get into download mode using a computer
camiloorozco said:
cant get into download mode either, is their any way to get into download mode using a computer
Click to expand...
Click to collapse
How to fix download/recovery 3 button combo- http://forum.xda-developers.com/showthread.php?t=821698
for that i have to be in download mode, wont work.
is there any way that i can get my phone into download mode using the computer and not the phone
Have you tried reading the link JJEgan gave you? (FAQ)
It had a lot of answers.
3-Button-Combo: Buttons must be pressed untill the screen lights up.
Then release all the buttons.
Sent from my GT-I9000
O-T said:
Have you tried reading the link JJEgan gave you? (FAQ)
It had a lot of answers.
Sent from my GT-I9000
Click to expand...
Click to collapse
it does have several answers but they all require download mode
3 button combo does not work for me
would need other way to get into download mode
camiloorozco said:
for that i have to be in download mode, wont work.
is there any way that i can get my phone into download mode using the computer and not the phone
Click to expand...
Click to collapse
The method in the thread I posted uses adb (via computer) to force your phone into download mode which you then flash a bootloader with working 3br which will then let you into download/recovery indefinitely, it worked for me.
Or you could make/buy a jig- http://forum.xda-developers.com/showthread.php?t=819551
Just to clear out this is not the problem to get into Recovery or Download Mode.
3-Button-Combo: Starting from a powered off phone, buttons must be pressed untill the screen lights up.
Then release all the buttons.
Sent from my GT-I9000
MrIwik said:
The method in the thread I posted uses adb (via computer) to force your phone into download mode which you then flash a bootloader with working 3br which will then let you into download/recovery indefinitely, it worked for me.
Or you could make/buy a jig- http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
am i supposed to use the adb when im turning the phone on or when its showing me the black screen
ive tried it at all times and it returns an error saying that it cant find the device
camiloorozco said:
am i supposed to use the adb when im turning the phone on or when its showing me the black screen
Click to expand...
Click to collapse
I just plugged the phone into the computer ran adb download.bat and phone was instantly put into download mode and recognised by odin.
If you are not confident or it's not working make/buy yourself a jig, this will put your phone into download mode and you can then flash whatever you wish through odin.
i live in switzerland and wouldnt know where to buy or how to make a download jig
i think im just gonna take it back to the store to get it replaced
learn how to flash with odin next time. i ditch kies a long time ago
used creeds rom and flash an another custom then stuck into samsung logo not booting and also not entering into download mode or recovery mode..any solution how to enter into download mode apart frm vol down+hme+power..any other method to enter into to download mode...pls help..
Try removing the battery wait for 2 min insert the battery again and try going to download mode
Sent from my GT-S5360 using xda app-developers app
try again this time
remove battery for 5 minutes (is it charged ?)
re insert
press home +vol down+power key
keep pressing .
you should most probably get in there
Or use a usb jig..
Fawkes...
i try this step but again same problem stuck at samsung logo
i dont know,how to use usb jig
naren2623 said:
i try this step but again same problem stuck at samsung logo
Click to expand...
Click to collapse
Stuck at Samsung logo :-o that means you are trying to get in to recovery not download mode remove battery and wait for 5min and press APPROPRIATE keys required to get into download mode
USING XDA APP ON SONY XPERIA U st25i
try to restore ure backup if u have done one in the past
Try to remove sd and simcard
Then try to enter download mode again
Sent from my GT-S5360 using xda app-developers app
naren2623 said:
used creeds rom and flash an another custom then stuck into samsung logo not booting and also not entering into download mode or recovery mode..any solution how to enter into download mode apart frm vol down+hme+power..any other method to enter into to download mode...pls help..
Click to expand...
Click to collapse
1. Plug the Charger for 5 minutes
2. After that, go to download mode (Volume Down + Home Button + Power Button, Make sure you do it Right.)
Insha allah, this is work. :angel:
naren2623 said:
used creeds rom and flash an another custom then stuck into samsung logo not booting and also not entering into download mode or recovery mode..any solution how to enter into download mode apart frm vol down+hme+power..any other method to enter into to download mode...pls help..
Click to expand...
Click to collapse
I am not sure if it works..
But remove battery, sim and sd card and then connect ur phone to ur pc and start odin.and then put battery in the cell and then go to download mode when connected to pc.
If it didnt help visit service centre.
Press thanx if i helped u.
DO THIS ONLY WHEN YOU PLUG IN YOUR PHONE AND NOTHING SHOWS UP ON THE SCREEN!!!
This method is basically same as the normal stock rom flashing tut, EXCEPT the way you get into Download Mode as your phone is HARD BROKEN.
1. Download all the files required in the "SOFT BRICKS" Prob, (Just Google that)
. 2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Now flash ur Stock rom via odin...
:good::good:
do thnk if u likd
npx123 said:
DO THIS ONLY WHEN YOU PLUG IN YOUR PHONE AND NOTHING SHOWS UP ON THE SCREEN!!!
This method is basically same as the normal stock rom flashing tut, EXCEPT the way you get into Download Mode as your phone is HARD BROKEN.
1. Download all the files required in the "SOFT BRICKS" Prob, (Just Google that)
. 2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Now flash ur Stock rom via odin...
:good::good:
do thnk if u likd
Click to expand...
Click to collapse
So this is a way to undo hardbrick....?
Huh?
Sent from my GT-S5360 using xda app-developers app
uhm
try to connect to pc with no battery inserted then after that put your battery up and then go to download mode. hope it will work
I had the exact same problem while flashing jellyblast v3 no recovery, download mode and stuck at boot logo. Here is the fix!!!
1. remove sd card and sim from your device
2. Switch on the device and Charge your device for 3-5 hours.
3. Now remove the charger and battery (It must be hot till now) wait for 5-10 seconds and re insert it again.
4. Now press (volume down + Power + Home buttons togather) now you should be in download mode.
5. Flash the stock rom via odin!!!!
I have tried this method I hope it will work :fingers-crossed::good::highfive:
Thanks
Manav harsana
Hi i currently own a Galaxy note 3 16gb Hong Kong version ( the copper gold one ) and cant go back to stock rom tried every possible thing but still no hope i always get the invalid ext4 img error when flashing with odin! any help please? i am currently running Sweet Rom v20 everything works fine i guess but the video camera apparently doesn't work!
Is it possible to bring my phone back to stock rom? or stuck with custom roms?
Which recovery are you on?
jace127 said:
Hi i currently own a Galaxy note 3 16gb Hong Kong version ( the copper gold one ) and cant go back to stock rom tried every possible thing but still no hope i always get the invalid ext4 img error when flashing with odin! any help please? i am currently running Sweet Rom v20 everything works fine i guess but the video camera apparently doesn't work!
Is it possible to bring my phone back to stock rom? or stuck with custom roms?
Click to expand...
Click to collapse
Did you wipe flash in Recovery Mode ?
You need to do that time you go from Stock to Custom or vice versa.
Colide said:
Did you wipe flash in Recovery Mode ?
You need to do that time you go from Stock to Custom or vice versa.
Click to expand...
Click to collapse
Yeah i did, but i'll try again with latest firmware and maybe see what happens!
Sergio Barbosa said:
Which recovery are you on?
Click to expand...
Click to collapse
CWM based recovery v6.0.4.7
Try this:
- Full wipe - factory reset
- Remove battery and wait a minute
- Power on with Vol Down+Home+Power to go directy into download mode with Vol Up
- Flash with Odin, but untick the "Auto Reboot" option
- Remove battery and wait a minute
- Power on with Vol Down+Home+Power to go directy into download mode with Vol Up
- Flash again with Odin, this time let it reboot
This should do it.
Sergio Barbosa said:
Try this:
- Full wipe - factory reset
- Remove battery and wait a minute
- Power on with Vol Down+Home+Power to go directy into download mode with Vol Up
- Flash with Odin, but untick the "Auto Reboot" option
- Remove battery and wait a minute
- Power on with Vol Down+Home+Power to go directy into download mode with Vol Up
- Flash again with Odin, this time let it reboot
This should do it.
Click to expand...
Click to collapse
Still no hope, followed the steps but still with the same invalid ext4 image error
PS- Fixed my phone downloaded latest HK firmware and flashed with Pit file! cheers guys
Results