Related
Hi, i´m new here and i have a problem with my defy, well my problem is that at the logo of dead space it shows the EA logo and then crashes, i have the ms2ginger and the gingerlegend 3.0 from other forum and with both roms crashes, in the original rom it works but doesn´t have textures it looks all white.
Please help me i want to play this game
RodrixX said:
Hi, i´m new here and i have a problem with my defy, well my problem is that some games crashes at the logo like dead space it shows the EA logo and then crashes, i have the ms2ginger and the gingerlegend 3.0 from other forum and with both roms crashes, in the original rom it works but doesn´t have textures it looks all white.
Please help me i want to play this game
Click to expand...
Click to collapse
Hi,
Well I am not very sure about a possible root cause but I have seen other people in this forum with similar problem. When I faced this problem it turned out my SD card had issue and I got it replaced. But, I also read somewhere where the phone of a user was detected with a broken GPU! So you may try troubleshooting by changing the SD and then running some benchmark apps
pranks1989 said:
Hi,
Well I am not very sure about a possible root cause but I have seen other people in this forum with similar problem. When I faced this problem it turned out my SD card had issue and I got it replaced. But, I also read somewhere where the phone of a user was detected with a broken GPU! So you may try troubleshooting by changing the SD and then running some benchmark apps
Click to expand...
Click to collapse
Mmm but with the original rom its runs fine except for the white textures that can be solved with chainfire, i want to play with these roms because i can record in 720p and are faster in the interface.
Okay.. Than can't say what the issue might be because as I mentioned I have played Asphalt6, Dead Space, Shadow Gun in CM7,CM9 and all runs great! In fact Shadowgun used to lag sometime in my stock ROM but runs good in CM7 and 9
pranks1989 said:
Okay.. Than can't say what the issue might be because as I mentioned I have played Asphalt6, Dead Space, Shadow Gun in CM7,CM9 and all runs great! In fact Shadowgun used to lag sometime in my stock ROM but runs good in CM7 and 9
Click to expand...
Click to collapse
Mmm maybe if installing cm7 can solve the problem but is there the file or files to record in 720p for cm7?
RodrixX said:
Mmm maybe if installing cm7 can solve the problem but is there the file or files to record in 720p for cm7?
Click to expand...
Click to collapse
CM7 latest nightlies do not have 720p I think(My phone went to service center before I can test it well!) But I am sure there are update.zip(mods) to enable it in CM7. May be someone else can throw more light to it
pranks1989 said:
CM7 latest nightlies do not have 720p I think(My phone went to service center before I can test it well!) But I am sure there are update.zip(mods) to enable it in CM7. May be someone else can throw more light to it
Click to expand...
Click to collapse
Okay with CM7 the games runs very well, but i want 720p record... in other forum they said that if i mod the build.prop it can solve the problem but i can`t modify it with root browser or ES file explorer :/ and if i modify the build.prop of system.ext3.tar and go to backup and restore in CM it says md5 mismatch.
RodrixX said:
Okay with CM7 the games runs very well, but i want 720p record... in other forum they said that if i mod the build.prop it can solve the problem but i can`t modify it with root browser or ES file explorer :/ and if i modify the build.prop of system.ext3.tar and go to backup and restore in CM it says md5 mismatch.
Click to expand...
Click to collapse
720p needs more than just modifying build.prop ! It says md5 mismatch because you changed the file from zip but the checksum remains same! Try searching the dev section again, you may get a solution for 720p in CM.. Or you may request a dev may be...
pranks1989 said:
Try searching the dev section again, you may get a solution for 720p in CM.. Or you may request a dev may be...
Click to expand...
Click to collapse
No. I'm sure 720p won't work in cm7... (if it would, the rom would be perfect!) I think there are many devs who tried it before ^^ perhaps u ask Walter79 (dev of MSGinger.) if he has a solution (or any other in the MSGinger thread). Or try the MSGinger 3
Greetz
pranks1989 said:
720p needs more than just modifying build.prop ! It says md5 mismatch because you changed the file from zip but the checksum remains same! Try searching the dev section again, you may get a solution for 720p in CM.. Or you may request a dev may be...
Click to expand...
Click to collapse
no, the member of the other forum said that if i modify the build.prop i can play dead space, because that in the model number it have MB526 of defy plus and not the MB525 of the normal defy, anyway i have modify it and the games shows the EA logo and after the message to use my headphones and later it crashes and then the games returns to the problem that shows the EA logo and crashes.
hboy1337 said:
No. I'm sure 720p won't work in cm7... (if it would, the rom would be perfect!) I think there are many devs who tried it before ^^ perhaps u ask Walter79 (dev of MSGinger.) if he has a solution (or any other in the MSGinger thread). Or try the MSGinger 3
Greetz
Click to expand...
Click to collapse
where i can download the MSGinger 3?
RodrixX said:
where i can download the MSGinger 3?
Click to expand...
Click to collapse
Here:
http://forum.xda-developers.com/showthread.php?t=1140839
hboy1337 said:
Here:
http://forum.xda-developers.com/showthread.php?t=1140839
Click to expand...
Click to collapse
Downloaded and the problem persists . Does the game have a crashreport to see what is the problem?
maybe i am a little late but... try Chainfire 3d....
Don't ask again what rom you need..you need to be on ANY ICS rom...(FrozenPika,ICS from bronxitas and Miuiv4) if you have GB rom you need to update to official ICS first!!!
author: the Akiba wind microblogging: http://weibo.com/hqiwu functions:
1 Tel SMS
3. Data Link Internet (part If the default APN Internet failure, please switch of APN)
4.wifi (default mac address, get mac address being debugged, since the 4.1.2 change mechanism, original failed to get the address method, but does not affect the use of)
5. Bluetooth seconds given
6.GPS (no pressure)
7 camera (comes with camera no problem, third-party compatibility may be a problem) . video (support 720P and 480P video switching)
9. panoramic camera (preview during shooting may have Huaping photographic results completely normal imaging) 0 E0 n. v _: s5 L8?
10 video player (ordinary video playback no problem being debugged 720P playback) & f: R6 b (Q / b8 ^; a) b
11.PC machine dual card mount PC can mount within set and external SD card, but suggest that you use the MTP mode, because the 4.0 after the the google default recommended the mtp and not add the USB the kind of mount way. Depth OS dial interface and address book, post a comprehensive revision to the depth of UI we are most concerned about the sound, not ordinary use, high requirements of sound can look forward to the next version of the update.
Download:CM-U8800PRO-121021-BY-IVAN-3.zip - 123.02 MB
Gapps: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Also for any bug pls report it here and explain exacly what the bug is so i can test it to see if its a bug and not something you think is a bug...and if its a bug i will report it to ivan to be fixed...
Known bugsn camera panorama shows some artifacts,microphone is a bit sensitive to you but not to the one who is listening to you those two the other is kernel optimise!
First!
Thank you Pika!!
good works pika
Sorry for the stupid question but how to download this ROM?!?!
dingila said:
Sorry for the stupid question but how to download this ROM?!?!
Click to expand...
Click to collapse
Like all others.but first i have to upload it!
pika to install this rom we have to format system?
mauronofrio said:
pika to install this rom we have to format system?
Click to expand...
Click to collapse
Full format is a diferent rom than ics!!
which dont work?
Which ROM has to be already installed on the device?
giorgoslouk said:
Which ROM has to be already installed on the device?
Click to expand...
Click to collapse
any ics...but you need to make full wipe data , system to be sure!!
pikachukaki said:
any ics...but you need to make full wipe data , system to be sure!!
Click to expand...
Click to collapse
Plz upload on googlecode . plz plz plz
Generation_Next-2000 said:
Plz upload on googlecode . plz plz plz
Click to expand...
Click to collapse
googlecode is readonly right now for maintance..im uploading to dev-host this time!!!
the file I downloaded is 88.4 mega, is that right? Why keep doing the reboot
baggino said:
the file I downloaded is 88.4 mega, is that right? Why keep doing the reboot
Click to expand...
Click to collapse
88.4 Mega is only the gapps... wait for the full rom!
ilciumbia said:
88.4 Mega is only the gapps... wait for the full rom!
Click to expand...
Click to collapse
full rom havent gapps inside...only my rom will have gapps....so download them!!
Upload Status
81%
~4 Minute(s) Remaining (~109 KB/s)
Also for any bug pls report it here and explain exacly what the bug is so i can test it to see if its a bug and not something you think is a bug...and if its a bug i will report it to ivan to be fixed...
Known bugsn camera panorama shows some artifacts,microphone is a bit sensitive to you but not to the one who is listening to you those two the other is kernel optimise!
CM-U8800PRO-121021-BY-IVAN-3.zip - 123.02 MB
pikachukaki said:
full rom havent gapps inside...only my rom will have gapps....so download them!!
Upload Status
81%
~4 Minute(s) Remaining (~109 KB/s)
Also for any bug pls report it here and explain exacly what the bug is so i can test it to see if its a bug and not something you think is a bug...and if its a bug i will report it to ivan to be fixed...
Known bugsn camera panorama shows some artifacts,microphone is a bit sensitive to you but not to the one who is listening to you those two the other is kernel optimise!
Click to expand...
Click to collapse
If something goes wrong, can i get back to ICS ?? And how to get back ???
Generation_Next-2000 said:
If something goes wrong, can i get back to ICS ?? And how to get back ???
Click to expand...
Click to collapse
You arent updating to full 4.1 rom...no baseband change...just flash another ics rom!!
I don't see the sim? cellular network not available
with other phone your network is ok
I fleshato co cwm 6.0.1.0???Maybe???
It must be flashed on oficial ics after pink screen unlock.
Sent from my ragelis
So finally our dev Tytung has brought us Jellybean 4.2.2 with almost all working features.
Finally camera, camcorder and panorama is here for 4.2.2.rom.
Facing any problems,feel free to post here and we will troubleshoot it for you?????
As you all know Tytung is not going to reply to any questions on Xda.
So you can post it here and get answers.
Long Live the Beast HD2 :laugh: :laugh:
Thanks to tytung for his hard work to keep our HD2 up to date.
Changelog:
V2.4 (Jul. 7, 2013)
Updated to CM-10.1.0 stable source code.
Fixed Bluetooth Tethering (Credits: marco.palumbi)
Added Privacy Guard support (Credits: CM)
Updated to Google Search 2.6.7.7219
Updated to Gmail 4.5.2-7141
Click to expand...
Click to collapse
V2.3 (Jun. 23, 2013)
Updated to CM-10.1.0-RC5 source code.
Updated to LowSoundFixer_v1.0.7.apk for fixing the low sound issue for CM-10.x. (Updated BT events. Not sure fix BT or not) (Credit: tytung)
Backported source code to fix native USB Tethering for CM-10.1 (frameworks_base) (Credit: tytung)
Added HWUI framework patch for CM-10.1 to support HWUI deny app HwaSettings.apk (Credits: royale1223 and tytung)
Allowed users to remove DSP Manager in the AROMA Installer. (Credit: tytung)
Fixed the black screen of incoming calls. (updated build.prop)
Updated the etc/init.d/99_lowmemorykiller tweak.
Updated to the latest hosts file (May-21-2013) for blocking ads.
Updated to Google Calendar 201305280
Updated to Google Maps 6.14.4
Updated to Google Play Store 4.1.6
Updated to Google Play services 3.1.36
Updated to Google Search 2.5.8.6757
Updated to Gmail 4.5-694836
Updated to YouTube 4.5.17
Click to expand...
Click to collapse
Changelog:
V2.2 (May 11, 2013)
Updated to CM-10.1.0-RC1 source code.
Included initrd.gz patch for NAND users. (Credit: marco.palumbi)
Included LowSoundFixer_v1.0.6.apk to fix the low sound issue for CM-10.x. (Credit: tytung)
Added WiFi Ad-Hoc Network support for CM-10.1 (wpa_supplicant v2.0 adhoc and Settings.apk) (Credit: tytung)
Backported source code to fix native WiFi Tethering for CM-10.1 (frameworks_base and netd) (Credit: tytung)
Updated to Google Play Store 4.0.27
Click to expand...
Click to collapse
I have a problem
Rahil S said:
So finally our dev has brought us Jellybean 4.2.2 with almost all working features,
including camera,wifi,bluetooth,gps. :good:
How many of you are using it?
Facing any problems?????
Long Live the Beast HD2 :laugh: :laugh:
Click to expand...
Click to collapse
I'm using sea_Jelly v2.0 Data On Ext but its not booting just stuck on evervolv logohttp://forum.xda-developers.com/images/icons/icon9.gif
CLK 1.4.0.1 320mb
cwm recovery v5.0.2.6
8gb class 4 micro sd (5.4 gb fat 32 default cluster/2gb ext4 default cluster)
help i cant post on the origanal tread because i dont have enough post to post in dev posthttp://forum.xda-developers.com/images/smilies/crying.gif
so please helphttp://forum.xda-developers.com/images/smilies/angel.gif
aazzam16661 said:
I'm using sea_Jelly v2.0 Data On Ext but its not booting just stuck on evervolv logohttp://forum.xda-developers.com/images/icons/icon9.gif
CLK 1.4.0.1 320mb
cwm recovery v5.0.2.6
8gb class 4 micro sd (5.4 gb fat 32 default cluster/2gb ext4 default cluster)
help i cant post on the origanal tread because i dont have enough post to post in dev posthttp://forum.xda-developers.com/images/smilies/crying.gif
so please helphttp://forum.xda-developers.com/images/smilies/angel.gif
Click to expand...
Click to collapse
Try to increase your system partition to 380mb and then try to reflash it.
Most problem are solved by it.
If not then u can PM me anytime. :good:
I am downloading Sea_JB v.2B and i can't wait to see how it works!
Aleks795 said:
I am downloading Sea_JB v.2B and i can't wait to see how it works!
Click to expand...
Click to collapse
The download link for Sea_JB v2B is not working, because there is too much load on site, but if you get to download then please let me know how it works after installation
It works like 4.1.1 but wifi running is lagging.
Aleks795 said:
It works like 4.1.1 but wifi running is lagging.
Click to expand...
Click to collapse
Is it so smooth????
Wifi is ok , i heard there are many problems with rom.
Can you share how you installed it, i mean tmous or eu, nand or native sd , sys partition.
It has problems with wake up, i don't know why.
I hd2 eu, nand+dataonExt, sys 300MB
Aleks795 said:
It has problems with wake up, i don't know why.
I hd2 eu, nand+dataonExt, sys 300MB
Click to expand...
Click to collapse
Increase your system partition size and then try it out
After few minutes it runs smoother, and there is no problem with wake up.
I think i have to change sdcard to faster and it will work perfectly. I didn't tested bt, camera etc yet.
Aleks795 said:
After few minutes it runs smoother, and there is no problem with wake up.
I think i have to change sdcard to faster and it will work perfectly. I didn't tested bt, camera etc yet.
Click to expand...
Click to collapse
Ok try it and let us know.
Even i want to try it but waiting for seaman2k to update link because other two link are not working.
Camera works good, but at second attempt (at first there was white stripes across screen)
Bluetooth works.
Aleks795 said:
Camera works good, but at second attempt (at first there was white stripes across screen)
Bluetooth works.
Click to expand...
Click to collapse
Thanks mate for updates, looks to be good rom.
Panorama and swype keyboard works?????
Have told seaman2k to upload a new link, will try as soon as new link is available.
Paranoid Android 2.99 data work - wifi not work
HellyBeanHD2 RC1 too data work - wifi not work
XYLON-EV V1 wifi work - data not work
Sea_JB V.2B wifi + data work
i tested 2 days latest 4.2.2 Roms. partition 400mb with class 10 sdcard (NAND dataonext4). My antutu score drop down to 2600~2800 1130 mghz. No big bugs in Roms but is not enough responsive and thinking time by start from apps it longer as 4.1.2 roms (Antutu 3400~3600) 1130 mghz. Launcher little bit buggy. All other stuff works. Anywhere have this to?
yakuzax1 said:
i tested 2 days latest 4.2.2 Roms. partition 400mb with class 10 sdcard (NAND dataonext4). My antutu score drop down to 2600~2800 1130 mghz. No big bugs in Roms but is not enough responsive and thinking time by start from apps it longer as 4.1.2 roms (Antutu 3400~3600) 1130 mghz. Launcher little bit buggy. All other stuff works. Anywhere have this to?
Click to expand...
Click to collapse
This are initial release so it is bit laggy, it will take a bit long to behave like 4.1.2.
Have you tried xylon rom, i think by far it is most smoothest 4.2.2 rom, with not much bug or lag.
if your looking for 4.2.2 then xylon rom is good with both data and wifi, try to increase you partition size.
If your happy with 4.1.2 then undoubtely tytung nexushd2 4.12 is best rom. smooth as butter and very responsive and consistent.
AW: Finally JB 4.2.2 with wifi.
You say it. Im on tytung Rom 4.1.2 1.4a at the Moment. For me its a best ROM for daily usage.
Gesendet von meinem NexusHD2 mit Tapatalk 2
yakuzax1 said:
You say it. Im on tytung Rom 4.1.2 1.4a at the Moment. For me its a best ROM for daily usage.
Gesendet von meinem NexusHD2 mit Tapatalk 2
Click to expand...
Click to collapse
You are right, its the best ROM.
Even i am sticking to same rom and will flash 4.2.2 when there will be release from tytung.:good:
I did flash the Seaman2k's 4.2.2 roms....i tried both of them, the PA and the normal version....alot of bugs and i would not recommend for daily use....not against it because i have been waiting for it for a very very long time...and i am using it because i like flashing different roms everyn week..
CAN ANYBODY PORT JELLY BEAN MIUI FOR MOTOROLA BRAVO??? DEFY already has miui JB,here is the link:http://forum.xda-developers.com/showthread.php?t=1161110
hiandro said:
CAN ANYBODY PORT JELLY BEAN MIUI FOR MOTOROLA BRAVO??? DEFY already has miui JB,here is the link:http://forum.xda-developers.com/showthread.php?t=1161110
Click to expand...
Click to collapse
I could, but it would be a couple of days at least before I could even try. I'm busy making stock roms for the Atrix HD from its fastboots and converting the Xperia Z XXHDPI icons to XHDPI for a rom I'm working on. Might have to test an Atrix HD Miui as well . Once I'm done with that crap I'll give it a shot.
To do it yourself, use a PC a zip manager, and text editor -- 7-Zip & Notepad ++ for Windows, File Roller & Gedit on Linux, Whatever's appropriate on a Mac~
The apps I recommend are the one that I use for doing this and know work properly for what we're doing. DO NOT USE STOCK NOTEPAD OR WORDPAD ON WINDOWS -- YOU'VE BEEN WARNED.
Use Latest Quarx CM10 for Bravo and Latest Defy MIUI
Open Defy Miui
Delete libbayercamera.so, liboemcamera.so, libsoccamera.so
Take any think that says libcamera from Bravo CM10 from /system/lib and put them in Defy Miui zip (libcamera_client.so, libcameraservices.so, libkobecamera.so)#
Go to /system/lib/hw in Defy Miui
Rename any file with jordan to kobe** (gps.jordan.so to gps.kobe.so, camera.jordan.so to camera.kobe.so -- same for the rest)
Open Miui build.prop
Search and Replace works good for this part (CTRL+H with Linux's Gedit)
Replace any jordan with kobe**
Replace any 525\526 with 520*
Replace any Defy with Bravo*
Go to the bottom, set camera to ClassA, 3m, & delete the 2 flash lines
Save build.prop
Go to /system/etc in Defy Miui
Replace mot_ise_imager_cfg.bin
Replace media_profiles.xml
Delete the Defy camera cal files
IF the Miui rom is custom kernel
Go to /system/bootmenu/ in Miui Defy and delete everything. Add in /system/bootmenu from Quarx Bravo CM10%$
Go to /system/lib/modules in Miui Defy and delete everything, replace with Bravo CM10.%
Click to expand...
Click to collapse
The only other thing that might need to be done is replacing Miui's /system/lib/libandroid_runtime.so. If it boots and runs you don't have to. If it loops, replace it.
* These can be skipped if you don't mind being branded as a Defy
** These two are mutually exclusive, whatever the value is in build.prop is what the gps.propvalue.so should be in /system/lib/hw -- you'll bootloop if they're different
# Can be skipped if you don't take pictures or would like to use the Defy's libsoccamera.so to take 16:9 848x480 widescreen videos. Its one or the other -- Defy driver with no photo camera but better\widescreen videos or Bravo driver with photo camera but only 4:3 aspect videos.
$ This is to use the Bravo's kernel and ramdisk, if Miui is stock kernel based, ignore this step
% Custom Kernel roms only
~ I've only ran a Mac for 30 minutes, OS 7 or 8, and all I did was make it cuss and say dumb things with the text to speech option. I couldn't wrap my head around a mouse with only 1 clicker :silly:
Funny, the above reads really similar to how you port basically any Defy rom to the Bravo ICS+ and I know I've posted that tutorial before. These same instructions work for GB roms as well, just slightly modify accordingly.
thanks man!!
skeevy420 said:
I could, but it would be a couple of days at least before I could even try. I'm busy making stock roms for the Atrix HD from its fastboots and converting the Xperia Z XXHDPI icons to XHDPI for a rom I'm working on. Might have to test an Atrix HD Miui as well . Once I'm done with that crap I'll give it a shot.
To do it yourself, use a PC a zip manager, and text editor -- 7-Zip & Notepad ++ for Windows, File Roller & Gedit on Linux, Whatever's appropriate on a Mac~
The apps I recommend are the one that I use for doing this and know work properly for what we're doing. DO NOT USE STOCK NOTEPAD OR WORDPAD ON WINDOWS -- YOU'VE BEEN WARNED.
Use Latest Quarx CM10 for Bravo and Latest Defy MIUI
The only other thing that might need to be done is replacing Miui's /system/lib/libandroid_runtime.so. If it boots and runs you don't have to. If it loops, replace it.
* These can be skipped if you don't mind being branded as a Defy
** These two are mutually exclusive, whatever the value is in build.prop is what the gps.propvalue.so should be in /system/lib/hw -- you'll bootloop if they're different
# Can be skipped if you don't take pictures or would like to use the Defy's libsoccamera.so to take 16:9 848x480 widescreen videos. Its one or the other -- Defy driver with no photo camera but better\widescreen videos or Bravo driver with photo camera but only 4:3 aspect videos.
$ This is to use the Bravo's kernel and ramdisk, if Miui is stock kernel based, ignore this step
% Custom Kernel roms only
~ I've only ran a Mac for 30 minutes, OS 7 or 8, and all I did was make it cuss and say dumb things with the text to speech option. I couldn't wrap my head around a mouse with only 1 clicker :silly:
Funny, the above reads really similar to how you port basically any Defy rom to the Bravo ICS+ and I know I've posted that tutorial before. These same instructions work for GB roms as well, just slightly modify accordingly.
Click to expand...
Click to collapse
I've been thinking to dive into developer's world ,you know.and i think this will be great stuff to start with..,THANKS A LOT skeevy420, i will certainly start working now.
I see, you are enjoying your new Atrix HD. good for you man and also i hope you will not leave bravo development(we need you)http://forum.xda-developers.com/ima...um.xda-developers.com/images/icons/icon10.gif
hiandro said:
I've been thinking to dive into developer's world ,you know.and i think this will be great stuff to start with..,THANKS A LOT skeevy420, i will certainly start working now.
I see, you are enjoying your new Atrix HD. good for you man and also i hope you will not leave bravo development(we need you)http://forum.xda-developers.com/ima...um.xda-developers.com/images/icons/icon10.gif
Click to expand...
Click to collapse
I'm not. I just have to play with my new toy for a bit.
Good luck with that. I'll help you test if you get it going.
I have my hands full trying to get any Atrix HD ICS rom to work with the AT&T JB kernel. Best I've done so far is getting the Canadian Bell ICS to finish gapps setup and get to the homescreen. Bootloops about a minute after that and I'll get maybe 30 seconds of screen time -- stressing maybe cause it only happened 3 out of 8 tries.. Can't get a logcat or even have the phone recognized over usb. Getting it to a partially working system, even if only for a minute, lets me know that it could possibly fully work.
Highly unstable
skeevy420 said:
I'm not. I just have to play with my new toy for a bit.
Good luck with that. I'll help you test if you get it going.
I have my hands full trying to get any Atrix HD ICS rom to work with the AT&T JB kernel. Best I've done so far is getting the Canadian Bell ICS to finish gapps setup and get to the homescreen. Bootloops about a minute after that and I'll get maybe 30 seconds of screen time -- stressing maybe cause it only happened 3 out of 8 tries.. Can't get a logcat or even have the phone recognized over usb. Getting it to a partially working system, even if only for a minute, lets me know that it could possibly fully work.
Click to expand...
Click to collapse
I did whatever you said and camera,WiFi worked well.But whenever I try to create Google account the device just reboots.It is highly unstable,only about 80 MB ram is free(slow),also music player also showed same problem as Google account did,
How can I make it stable,any idea???
If you can, upload what you're working on and I'll try it out. That'll be easier than asking for logcats and giving you ideas to try.
What gapps did you use? I always use the Defy Minimal gapps.
ok
skeevy420 said:
If you can, upload what you're working on and I'll try it out. That'll be easier than asking for logcats and giving you ideas to try.
What gapps did you use? I always use the Defy Minimal gapps.
Click to expand...
Click to collapse
i didnt use any gapps, i thought miui already had gapps by default.i just changed build.props and others that you told in earlier post.
where can i upload the zip so that you can download????
hiandro said:
i didnt use any gapps, i thought miui already had gapps by default.i just changed build.props and others that you told in earlier post.
where can i upload the zip so that you can download????
Click to expand...
Click to collapse
Gapps depends on the rom -- some come with them, some don't.
You can upload to anywhere -- Mediafire, Google Drive, Dropbox, whatever's convenient for you.
hiandro said:
CAN ANYBODY PORT JELLY BEAN MIUI FOR MOTOROLA BRAVO??? DEFY already has miui JB,here is the link:http://forum.xda-developers.com/showthread.php?t=1161110
Click to expand...
Click to collapse
a chinese guy is working on it , and he said its coming soon,
http://bbs.gfan.com/forum.php?mod=viewthread&tid=6022223&extra=page=1
this is the preview, sorry for my bad english
banyelaiwande said:
a chinese guy is working on it , and he said its coming soon,
http://bbs.gfan.com/forum.php?mod=viewthread&tid=6022223&extra=page=1
this is the preview, sorry for my bad english
Click to expand...
Click to collapse
looks nice and clean,
ok man ,you have to keep on eye on that and share the link when he's done.
is up
hiandro said:
looks nice and clean,
ok man ,you have to keep on eye on that and share the link when he's done.
Click to expand...
Click to collapse
The rom is alredy posted in the first post of the trhead in the link i am downloading right now but i dont think i will try it today i am hapy with the 4.2.2 http://forum.xda-developers.com/images/smilies/biggrin.gif
everal1810 said:
The rom is alredy posted in the first post of the trhead in the link i am downloading right now but i dont think i will try it today i am hapy with the 4.2.2 http://forum.xda-developers.com/images/smilies/biggrin.gif
Click to expand...
Click to collapse
Is 4.2.2 available for bravo?,give me the link please...
here
hiandro said:
Is 4.2.2 available for bravo?,give me the link please...
Click to expand...
Click to collapse
just search in the 4.1.1 thread in motorola bravo development some times for know when there are a new update
in the first page of the 4.1.1 thread you can search for the quarks build and in the server just search for 10.1 bavo sorry i cant post links xD
skeevydude said:
I could, but it would be a couple of days at least before I could even try. I'm busy making stock roms for the Atrix HD from its fastboots and converting the Xperia Z XXHDPI icons to XHDPI for a rom I'm working on. Might have to test an Atrix HD Miui as well . Once I'm done with that crap I'll give it a shot.
To do it yourself, use a PC a zip manager, and text editor -- 7-Zip & Notepad ++ for Windows, File Roller & Gedit on Linux, Whatever's appropriate on a Mac~
The apps I recommend are the one that I use for doing this and know work properly for what we're doing. DO NOT USE STOCK NOTEPAD OR WORDPAD ON WINDOWS -- YOU'VE BEEN WARNED.
Use Latest Quarx CM10 for Bravo and Latest Defy MIUI
The only other thing that might need to be done is replacing Miui's /system/lib/libandroid_runtime.so. If it boots and runs you don't have to. If it loops, replace it.
* These can be skipped if you don't mind being branded as a Defy
** These two are mutually exclusive, whatever the value is in build.prop is what the gps.propvalue.so should be in /system/lib/hw -- you'll bootloop if they're different
# Can be skipped if you don't take pictures or would like to use the Defy's libsoccamera.so to take 16:9 848x480 widescreen videos. Its one or the other -- Defy driver with no photo camera but better\widescreen videos or Bravo driver with photo camera but only 4:3 aspect videos.
$ This is to use the Bravo's kernel and ramdisk, if Miui is stock kernel based, ignore this step
% Custom Kernel roms only
~ I've only ran a Mac for 30 minutes, OS 7 or 8, and all I did was make it cuss and say dumb things with the text to speech option. I couldn't wrap my head around a mouse with only 1 clicker :silly:
Funny, the above reads really similar to how you port basically any Defy rom to the Bravo ICS+ and I know I've posted that tutorial before. These same instructions work for GB roms as well, just slightly modify accordingly.
Click to expand...
Click to collapse
I did!
WIUI Defy v4 + cm-10-20130507-NIGHTLY-mb520 from Quarx
i made MIUI Motorola Bravo port, thanks for your help.
here is file for test on your bravo:
https://www.dropbox.com/s/s84tvlh8dxqn7cx/WIUI_v4_JB_Bravo_3_1_21.zip
Hi.
I have a Motorola Defy with 2.3.6
(45.0.2310.mb526.Asiaretail.en.03)
Taking a look at the camera, lens are red.
I ask friends to look at the camera, and they all say it´s red, burgundy etc.
The software defycolorlens claims it´s green.
How can I be sure which camera do I have?
Thanks
If you install a Gingerbread rom and the cam isn't working you have a green lens defy......
Sent from my MB525 red , froyo 2.2.2 german blurless service.sbf, as stock rom
bone101 said:
If you install a Gingerbread rom and the cam isn't working you have a green lens defy......
Sent from my MB525 red , froyo 2.2.2 german blurless service.sbf, as stock rom
Click to expand...
Click to collapse
Cam works fine. Records in VGA 640x480.
Adding some info:
Installed Catlog.
Started Catlog, then camera.
Camera makes that funny noise and turns on.
Get back to Catlog
A lot of Camera entries. None of them seem to say anything about SOC or Bayer.
HELP PLEASE!!!!
search for "jordancamera" in catlog
Sent from my MB525 red , froyo 2.2.2 german blurless service.sbf, as stock rom
bone101 said:
search for "jordancamera" in catlog
Sent from my MB525 red , froyo 2.2.2 german blurless service.sbf, as stock rom
Click to expand...
Click to collapse
No log with the letters "jor".
After searching a while, also found a reccomendation to search for the word "cameracommon".
Also, no luck.
Help!.
PS: My phone is in spanish, so i guess some logs may be different. Anyway, it seems to be mostly in english but a few words (some colours in the log) and other spanish users claim to find the word jordancamera or cameracommon in catlog.
taringaheroe said:
How can I be sure which camera do I have?
Thanks
Click to expand...
Click to collapse
I don't understand why people find it so difficult to read the All-in-one Beginners Guide. If you're new here you shouldn't even be posting if you haven't searched first.
The are a few ways to check which Module your Defy has, the best one and more accurate one though, is installing Catlog, starting it up and then start the camera. After starting the camera, go back to Catlog app, pause the logging, and search for "camera". There should be a couple entries, one of them should say either SOC or Bayer.
Click to expand...
Click to collapse
It clearly says:
Code:
JordanCameraWrapper [I] Detected Bayer Device
Antiga Prime said:
I don't understand why people find it so difficult to read the All-in-one Beginners Guide. If you're new here you shouldn't even be posting if you haven't searched first.
It clearly says:
Code:
JordanCameraWrapper [I] Detected Bayer Device
Click to expand...
Click to collapse
Hi.
Thanks for your help.
If you read my second post, you will find out I did read that guide.
As I said, doesn´t work for me. That´s why I´m posting and asking for help.
Thanks for understanding.
I'm trying to upload a video, but the phone I'm using to record is #$%$. (Nokia Lumia)
After reading your post, I added searching "wrapp" in the catlog. A couple entries are named logwrapp.. but no luck with the camera data I need.