Can anybody port jelly bean miui for motorola bravo??? - Bravo General

CAN ANYBODY PORT JELLY BEAN MIUI FOR MOTOROLA BRAVO??? DEFY already has miui JB,here is the link:http://forum.xda-developers.com/showthread.php?t=1161110

hiandro said:
CAN ANYBODY PORT JELLY BEAN MIUI FOR MOTOROLA BRAVO??? DEFY already has miui JB,here is the link:http://forum.xda-developers.com/showthread.php?t=1161110
Click to expand...
Click to collapse
I could, but it would be a couple of days at least before I could even try. I'm busy making stock roms for the Atrix HD from its fastboots and converting the Xperia Z XXHDPI icons to XHDPI for a rom I'm working on. Might have to test an Atrix HD Miui as well . Once I'm done with that crap I'll give it a shot.
To do it yourself, use a PC a zip manager, and text editor -- 7-Zip & Notepad ++ for Windows, File Roller & Gedit on Linux, Whatever's appropriate on a Mac~
The apps I recommend are the one that I use for doing this and know work properly for what we're doing. DO NOT USE STOCK NOTEPAD OR WORDPAD ON WINDOWS -- YOU'VE BEEN WARNED.
Use Latest Quarx CM10 for Bravo and Latest Defy MIUI
Open Defy Miui
Delete libbayercamera.so, liboemcamera.so, libsoccamera.so
Take any think that says libcamera from Bravo CM10 from /system/lib and put them in Defy Miui zip (libcamera_client.so, libcameraservices.so, libkobecamera.so)#
Go to /system/lib/hw in Defy Miui
Rename any file with jordan to kobe** (gps.jordan.so to gps.kobe.so, camera.jordan.so to camera.kobe.so -- same for the rest)
Open Miui build.prop
Search and Replace works good for this part (CTRL+H with Linux's Gedit)
Replace any jordan with kobe**
Replace any 525\526 with 520*
Replace any Defy with Bravo*
Go to the bottom, set camera to ClassA, 3m, & delete the 2 flash lines
Save build.prop
Go to /system/etc in Defy Miui
Replace mot_ise_imager_cfg.bin
Replace media_profiles.xml
Delete the Defy camera cal files
IF the Miui rom is custom kernel
Go to /system/bootmenu/ in Miui Defy and delete everything. Add in /system/bootmenu from Quarx Bravo CM10%$
Go to /system/lib/modules in Miui Defy and delete everything, replace with Bravo CM10.%
Click to expand...
Click to collapse
The only other thing that might need to be done is replacing Miui's /system/lib/libandroid_runtime.so. If it boots and runs you don't have to. If it loops, replace it.
* These can be skipped if you don't mind being branded as a Defy
** These two are mutually exclusive, whatever the value is in build.prop is what the gps.propvalue.so should be in /system/lib/hw -- you'll bootloop if they're different
# Can be skipped if you don't take pictures or would like to use the Defy's libsoccamera.so to take 16:9 848x480 widescreen videos. Its one or the other -- Defy driver with no photo camera but better\widescreen videos or Bravo driver with photo camera but only 4:3 aspect videos.
$ This is to use the Bravo's kernel and ramdisk, if Miui is stock kernel based, ignore this step
% Custom Kernel roms only
~ I've only ran a Mac for 30 minutes, OS 7 or 8, and all I did was make it cuss and say dumb things with the text to speech option. I couldn't wrap my head around a mouse with only 1 clicker :silly:
Funny, the above reads really similar to how you port basically any Defy rom to the Bravo ICS+ and I know I've posted that tutorial before. These same instructions work for GB roms as well, just slightly modify accordingly.

thanks man!!
skeevy420 said:
I could, but it would be a couple of days at least before I could even try. I'm busy making stock roms for the Atrix HD from its fastboots and converting the Xperia Z XXHDPI icons to XHDPI for a rom I'm working on. Might have to test an Atrix HD Miui as well . Once I'm done with that crap I'll give it a shot.
To do it yourself, use a PC a zip manager, and text editor -- 7-Zip & Notepad ++ for Windows, File Roller & Gedit on Linux, Whatever's appropriate on a Mac~
The apps I recommend are the one that I use for doing this and know work properly for what we're doing. DO NOT USE STOCK NOTEPAD OR WORDPAD ON WINDOWS -- YOU'VE BEEN WARNED.
Use Latest Quarx CM10 for Bravo and Latest Defy MIUI
The only other thing that might need to be done is replacing Miui's /system/lib/libandroid_runtime.so. If it boots and runs you don't have to. If it loops, replace it.
* These can be skipped if you don't mind being branded as a Defy
** These two are mutually exclusive, whatever the value is in build.prop is what the gps.propvalue.so should be in /system/lib/hw -- you'll bootloop if they're different
# Can be skipped if you don't take pictures or would like to use the Defy's libsoccamera.so to take 16:9 848x480 widescreen videos. Its one or the other -- Defy driver with no photo camera but better\widescreen videos or Bravo driver with photo camera but only 4:3 aspect videos.
$ This is to use the Bravo's kernel and ramdisk, if Miui is stock kernel based, ignore this step
% Custom Kernel roms only
~ I've only ran a Mac for 30 minutes, OS 7 or 8, and all I did was make it cuss and say dumb things with the text to speech option. I couldn't wrap my head around a mouse with only 1 clicker :silly:
Funny, the above reads really similar to how you port basically any Defy rom to the Bravo ICS+ and I know I've posted that tutorial before. These same instructions work for GB roms as well, just slightly modify accordingly.
Click to expand...
Click to collapse
I've been thinking to dive into developer's world ,you know.and i think this will be great stuff to start with..,THANKS A LOT skeevy420, i will certainly start working now.
I see, you are enjoying your new Atrix HD. good for you man and also i hope you will not leave bravo development(we need you)http://forum.xda-developers.com/ima...um.xda-developers.com/images/icons/icon10.gif

hiandro said:
I've been thinking to dive into developer's world ,you know.and i think this will be great stuff to start with..,THANKS A LOT skeevy420, i will certainly start working now.
I see, you are enjoying your new Atrix HD. good for you man and also i hope you will not leave bravo development(we need you)http://forum.xda-developers.com/ima...um.xda-developers.com/images/icons/icon10.gif
Click to expand...
Click to collapse
I'm not. I just have to play with my new toy for a bit.
Good luck with that. I'll help you test if you get it going.
I have my hands full trying to get any Atrix HD ICS rom to work with the AT&T JB kernel. Best I've done so far is getting the Canadian Bell ICS to finish gapps setup and get to the homescreen. Bootloops about a minute after that and I'll get maybe 30 seconds of screen time -- stressing maybe cause it only happened 3 out of 8 tries.. Can't get a logcat or even have the phone recognized over usb. Getting it to a partially working system, even if only for a minute, lets me know that it could possibly fully work.

Highly unstable
skeevy420 said:
I'm not. I just have to play with my new toy for a bit.
Good luck with that. I'll help you test if you get it going.
I have my hands full trying to get any Atrix HD ICS rom to work with the AT&T JB kernel. Best I've done so far is getting the Canadian Bell ICS to finish gapps setup and get to the homescreen. Bootloops about a minute after that and I'll get maybe 30 seconds of screen time -- stressing maybe cause it only happened 3 out of 8 tries.. Can't get a logcat or even have the phone recognized over usb. Getting it to a partially working system, even if only for a minute, lets me know that it could possibly fully work.
Click to expand...
Click to collapse
I did whatever you said and camera,WiFi worked well.But whenever I try to create Google account the device just reboots.It is highly unstable,only about 80 MB ram is free(slow),also music player also showed same problem as Google account did,
How can I make it stable,any idea???

If you can, upload what you're working on and I'll try it out. That'll be easier than asking for logcats and giving you ideas to try.
What gapps did you use? I always use the Defy Minimal gapps.

ok
skeevy420 said:
If you can, upload what you're working on and I'll try it out. That'll be easier than asking for logcats and giving you ideas to try.
What gapps did you use? I always use the Defy Minimal gapps.
Click to expand...
Click to collapse
i didnt use any gapps, i thought miui already had gapps by default.i just changed build.props and others that you told in earlier post.
where can i upload the zip so that you can download????

hiandro said:
i didnt use any gapps, i thought miui already had gapps by default.i just changed build.props and others that you told in earlier post.
where can i upload the zip so that you can download????
Click to expand...
Click to collapse
Gapps depends on the rom -- some come with them, some don't.
You can upload to anywhere -- Mediafire, Google Drive, Dropbox, whatever's convenient for you.

hiandro said:
CAN ANYBODY PORT JELLY BEAN MIUI FOR MOTOROLA BRAVO??? DEFY already has miui JB,here is the link:http://forum.xda-developers.com/showthread.php?t=1161110
Click to expand...
Click to collapse
a chinese guy is working on it , and he said its coming soon,
http://bbs.gfan.com/forum.php?mod=viewthread&tid=6022223&extra=page=1
this is the preview, sorry for my bad english

banyelaiwande said:
a chinese guy is working on it , and he said its coming soon,
http://bbs.gfan.com/forum.php?mod=viewthread&tid=6022223&extra=page=1
this is the preview, sorry for my bad english
Click to expand...
Click to collapse
looks nice and clean,
ok man ,you have to keep on eye on that and share the link when he's done.

is up
hiandro said:
looks nice and clean,
ok man ,you have to keep on eye on that and share the link when he's done.
Click to expand...
Click to collapse
The rom is alredy posted in the first post of the trhead in the link i am downloading right now but i dont think i will try it today i am hapy with the 4.2.2 http://forum.xda-developers.com/images/smilies/biggrin.gif

everal1810 said:
The rom is alredy posted in the first post of the trhead in the link i am downloading right now but i dont think i will try it today i am hapy with the 4.2.2 http://forum.xda-developers.com/images/smilies/biggrin.gif
Click to expand...
Click to collapse
Is 4.2.2 available for bravo?,give me the link please...

here
hiandro said:
Is 4.2.2 available for bravo?,give me the link please...
Click to expand...
Click to collapse
just search in the 4.1.1 thread in motorola bravo development some times for know when there are a new update
in the first page of the 4.1.1 thread you can search for the quarks build and in the server just search for 10.1 bavo sorry i cant post links xD

skeevydude said:
I could, but it would be a couple of days at least before I could even try. I'm busy making stock roms for the Atrix HD from its fastboots and converting the Xperia Z XXHDPI icons to XHDPI for a rom I'm working on. Might have to test an Atrix HD Miui as well . Once I'm done with that crap I'll give it a shot.
To do it yourself, use a PC a zip manager, and text editor -- 7-Zip & Notepad ++ for Windows, File Roller & Gedit on Linux, Whatever's appropriate on a Mac~
The apps I recommend are the one that I use for doing this and know work properly for what we're doing. DO NOT USE STOCK NOTEPAD OR WORDPAD ON WINDOWS -- YOU'VE BEEN WARNED.
Use Latest Quarx CM10 for Bravo and Latest Defy MIUI
The only other thing that might need to be done is replacing Miui's /system/lib/libandroid_runtime.so. If it boots and runs you don't have to. If it loops, replace it.
* These can be skipped if you don't mind being branded as a Defy
** These two are mutually exclusive, whatever the value is in build.prop is what the gps.propvalue.so should be in /system/lib/hw -- you'll bootloop if they're different
# Can be skipped if you don't take pictures or would like to use the Defy's libsoccamera.so to take 16:9 848x480 widescreen videos. Its one or the other -- Defy driver with no photo camera but better\widescreen videos or Bravo driver with photo camera but only 4:3 aspect videos.
$ This is to use the Bravo's kernel and ramdisk, if Miui is stock kernel based, ignore this step
% Custom Kernel roms only
~ I've only ran a Mac for 30 minutes, OS 7 or 8, and all I did was make it cuss and say dumb things with the text to speech option. I couldn't wrap my head around a mouse with only 1 clicker :silly:
Funny, the above reads really similar to how you port basically any Defy rom to the Bravo ICS+ and I know I've posted that tutorial before. These same instructions work for GB roms as well, just slightly modify accordingly.
Click to expand...
Click to collapse
I did!
WIUI Defy v4 + cm-10-20130507-NIGHTLY-mb520 from Quarx
i made MIUI Motorola Bravo port, thanks for your help.
here is file for test on your bravo:
https://www.dropbox.com/s/s84tvlh8dxqn7cx/WIUI_v4_JB_Bravo_3_1_21.zip

Related

Install CyanogemMod 7 in your Milestone 2

Old Thread:
Hi guys,
With this new kernel and a lot of new ideas, isnt better if we try a new port of cyanogen with no motoblur?? Particulary, i prefer that ROM...
I didnt know how to do, but i can test...
There are so many roms for droid 2, like fission, that i want to use in my milestone 2, but see that mike and others try to port but doesnt work. But now, we have new roms and new oportunites...
=)
Is that port possible now (with leaked CHINA rom)?
Click to expand...
Click to collapse
Rom UPDATED!! (02/09): Check on DEV Section using the link below
New Rom Release (28/08):
Hi Guys,
A new CM7 Rom was just released in DEV forum by Endless7 (thanks!)... If anyone (like me!) dont be able to post in DEV forums and need suport for this ROM... PLZ!! USE THIS TREAD....
I´m working now, but I will try this ROM at Night, finger crossed! THIS IS THE WAY
Bye..
jorgebaruchi said:
Hi guys,
With this new kernel and a lot of new ideas, isnt better if we try a new port of cyanogen with no motoblur?? Particulary, i prefer that ROM...
I didnt know how to do, but i can test...
There are so many roms for droid 2, like fission, that i want to use in my milestone 2, but see that mike and others try to port but doesnt work. But now, we have new roms and new oportunites...
=)
Is that port possible now (with leaked CHINA rom)?
Click to expand...
Click to collapse
Well, I'm still learning the basics of android building. As soon as I get my custom hijack for 2nd init working I will try to port CM to the Milestone2. Note that I'm not promising any dates. My free time is very short and I'll do my best, but I don't want to get under pressure because of this
I think a leaked unlocked bootloader would do the trick
Just jocking. As I see it, nothing has changed regarding custom roms, as the bootloaded stays the same.
But I am quite confident, that r2beta0 will have progress on 2nd-init soon.
cypressious said:
I think a leaked unlocked bootloader would do the trick
Just jocking. As I see it, nothing has changed regarding custom roms, as the bootloaded stays the same.
But I am quite confident, that r2beta0 will have progress on 2nd-init soon.
Click to expand...
Click to collapse
filgers crossed!! but i remender that there are some blocks on system booting with froyo rom... then, i thinked that new rom could change this issue... =/
well, thks everybody!
r2beta0 said:
Well, I'm still learning the basics of android building. As soon as I get my custom hijack for 2nd init working I will try to port CM to the Milestone2. Note that I'm not promising any dates. My free time is very short and I'll do my best, but I don't want to get under pressure because of this
Click to expand...
Click to collapse
I think we don't need the 2nd-init built specially for GB rom, since Defy's CM7 (and Droid 2/X's) still have the base SBF on froyo. Maybe if we exchange the boot.img and devtree.img from GB leak to the ones inside Defy's CM7 update.zip (don't forget to delete /system/etc/motorola/bp_nvm_default/pds_init too, or you'll get all that GSM problems again)?
Edit: Won't Apex 2.0 RC2 work on GB Mile2?
@Milestone 2 (Finnaly on Gingerbread!)
dangpzanco said:
I think we don't need the 2nd-init built specially for GB rom, since Defy's CM7 (and Droid 2/X's) still have the base SBF on froyo. Maybe if we exchange the boot.img and devtree.img from GB leak to the ones inside Defy's CM7 update.zip (don't forget to delete /system/etc/motorola/bp_nvm_default/pds_init too, or you'll get all that GSM problems again)?
Edit: Won't Apex 2.0 RC2 work on GB Mile2?
@Milestone 2 (Finnaly on Gingerbread!)
Click to expand...
Click to collapse
We need 2nd-init in order to change the boot sequence required by CM7. DroidX already have a customized 2nd-init for CM7, but I don't want to use it yet as it uses bootscripts inside a /system/etc/shadow-boot.zip. I prefer to have my files ready to edit and not inside a zip file. Also, trying to make my own hijack is giving me knowledge I will need when trying to port CM to M2.
r2beta0 said:
We need 2nd-init in order to change the boot sequence required by CM7. DroidX already have a customized 2nd-init for CM7, but I don't want to use it yet as it uses bootscripts inside a /system/etc/shadow-boot.zip. I prefer to have my files ready to edit and not inside a zip file. Also, trying to make my own hijack is giving me knowledge I will need when trying to port CM to M2.
Click to expand...
Click to collapse
Hm... Okay, nice! So we have a better coded 2nd-init.
PS: If you need to unpack a boot.img to get the scripts/zImage, I got it with dsixda's Kitchen
@Milestone 2 (Finnaly on Gingerbread!)
dangpzanco said:
Hm... Okay, nice! So we have a better coded 2nd-init.
PS: If you need to unpack a boot.img to get the scripts/zImage, I got it with dsixda's Kitchen
@Milestone 2 (Finnaly on Gingerbread!)
Click to expand...
Click to collapse
Yeps, I'm using that one too.
Hi guys,
Searching the web, i found a oficial port of MIUI for droid 2, than i think: "Can we port this version with the ch kernel and change the baseband?"
If its possible, i think that this way is more simple, however port a defy rom and fix the incompatible bugs...
=)
jorgebaruchi said:
Hi guys,
Searching the web, i found a oficial port of MIUI for droid 2, than i think: "Can we port this version with the ch kernel and change the baseband?"
If its possible, i think that this way is more simple, however port a defy rom and fix the incompatible bugs...
=)
Click to expand...
Click to collapse
We should check first if this ROM is compatible with the kernels we have available. If so, we can try to port from that. Some ppl into Development forum are already trying to do that.
r2beta0 said:
We should check first if this ROM is compatible with the kernels we have available. If so, we can try to port from that. Some ppl into Development forum are already trying to do that.
Click to expand...
Click to collapse
It is more difficult to port from a CDMA device. If you achieve Apex Rom to work with GSM network, then you can think about porting it.
@Milestone 2 (Finnaly on Gingerbread!)
Hey guys, a new ROM has just released on Dev Forum, click here and see by your self!!!!
One maybe stupid question:
Can I install this rom on froyo or should I first upgrade my MM2 to GB?
There´s what u have to do (didn´t test yeat, I will try at night. But u can always downgrade with a stock SBF):
** Make u sure of your phone is rooted before everything !! **
1. Download all-in-one.zip and put into /sdcard/
2. Download and Install Droid2bootstrapper (old CWM) from the internet/market
3. Update to Ported Defy CWM (there´s a thread in general forum explain how to install that)
4. Boot into CWM and apply the all-in-one.zip and after (without reboot) make a full-wipe (make u sure that u have maked a backup of everything before)
5. At this moment, reboot your phone and use the keys combination for enter in bootloader mode
6. Download the fixed_sbf from the original thread in DEV forum and apply with RSD lite.
7. Your phone will reboot and after some minutes, U Can Enjoy the new ROM!!!
I think I made ​​a big mistake!
I touch everything and I'm going to Defy baseband! I change the parameter.
Since the network can not be found.
Any idea?
i will take a look at this
ping0o said:
I think I made ​​a big mistake!
I touch everything and I'm going to Defy baseband! I change the parameter.
Since the network can not be found.
Any idea?
i will take a look at this
Click to expand...
Click to collapse
Strange..
Try that tread and if dont work, reapply the rom...
Good mod!
But does anybody know how can I get back low battery beep and camera sounds? I find them rather useful.
I got struck in "google" logo and the phone dont boot
how can i do factory reset in bootmenu from the CM7 ? i dont find this option there...
or even re-install all the stuff...
EDIT: i can't open CWM 4.0 from the BootMenu 1.0.2 , i try latest recovery or stable recovery but it says "error in /system/bootmenu/script/recovery.sh (result: no such file or directory)
Please help ! T__T
I can't post in thread on development's subforum, so I ask my question here:
where can I find a tool and howto to make my own custom *.zip file to use with CWM? I have found a tool called Android Kitchen, but readme inside archive says, that it is mainly created for HTC devices. Am I following a correct path , or I should search some other tools?
update:
I have successfully flashed my custom *.zip file based on information taken from www[dot]londatiga[dot]net/it/how-to-create-android-update-zip-package/
coming from miui, how should i update?

[Q] Honeycomb was ported to Armv6 blade. What about ICS?

Hi there,I'm trying to port the SDK dump to my LG P500,which has the same specs like ZTE Blade.
After applying normal methods for making other phones' roms boot and a special patch found here it doesn't even give logcat,so bootloops in recovery.
After doing some research,I discovered that libs are built for armv7,which we don't have. But also Honeycomb SDK libs were built from armv7,but we got it working on both LG P500 and ZTE Blade.
So,any ideas? Just asking
I think honeycomb and below was build from armeabi (To run on the old simulator that was armv6 vfp (but the vfp wasn't used by google).
whereas ics was built for armeabi-v7a
That is certainly implied by the AVD manager anyway.
unrandomsam said:
I think honeycomb and below was build from armeabi (To run on the old simulator that was armv6 vfp (but the vfp wasn't used by google).
whereas ics was built for armeabi-v7a
That is certainly implied by the AVD manager anyway.
Click to expand...
Click to collapse
Thank you for replying
usually only kernel have ARM text and other also init.rc have kernel text if editing them to ARMv6 kernel text then it needs to work in ARMv6 device..
If not, then some files needs editing...
Android 4.0 ICS needs new EGL and hw files which needs to be ARMv6= ZTE Blade/other phone! all phones have own files to work fine!
If someone can edit Android 4.0 libGLES*.so, libEGL.so files and then egl folder files needs editing.. and then hw folder files for Screen, sensors, GPS, Audio, etc.
then them need right files to get work the audio, camera, WiFi...
WiFi files can work if you add older Android OS WiFi files: libhardware-legacy.so or what it is and then right WiFi files to /System/etc/
to get all to work it maybe takes many days and for me more than 9 months because I'm only 14! xD
SDK port is maybe not really good, it's better to port from other device ex: Samsung... then some files works without editing...
manumanfred the sdk was compiled for ARMv7, it's a different cpu, different machine code. It needs recompiling, to be able to do that you need the source code to compile it.
Without source code you're about as likely to get ICS running on your Blade as you are to get your PS3 running Windows 7.
When devices with ICS are available source code will be too, so porting it from another device would be a waste of time.
wbaw said:
manumanfred the sdk was compiled for ARMv7, it's a different cpu, different machine code. It needs recompiling, to be able to do that you need the source code to compile it.
Without source code you're about as likely to get ICS running on your Blade as you are to get your PS3 running Windows 7.
When devices with ICS are available source code will be too, so porting it from another device would be a waste of time.
Click to expand...
Click to collapse
its not hard to get ICS on zte blade as zte blade got a test verision of ICS
SWEATTAIMI said:
its not hard to get ICS on zte blade as zte blade got a test verision of ICS
Click to expand...
Click to collapse
Are you sharing it?
If not, it's still pretty hard.
http://forum.xda-developers.com/showthread.php?t=1312595
anyone please check this out maybe this can work
http://groups.google.com/group/android-building/msg/c0e01b4619a1455a?pli=1
Android ICS sourcecode is released! I belive that now in Cyanogenmod headquaters people hear red alert
uosiumen said:
http://groups.google.com/group/android-building/msg/c0e01b4619a1455a?pli=1
Android ICS sourcecode is released! I belive that now in Cyanogenmod headquaters people hear red alert
Click to expand...
Click to collapse
uosiumen said:
http://groups.google.com/group/android-building/msg/c0e01b4619a1455a?pli=1
Android ICS sourcecode is released! I belive that now in Cyanogenmod headquaters people hear red alert
Click to expand...
Click to collapse
Fail, u cant grab anything
Sent from my Transformer TF101 using xda premium
ICS on the Blade is booting!
But that's all it does
I used this ROM and replaced boot.img with CM N257. In the honeycomb port they fixed the flipped screen with patching libsurfaceflinger.so on offset 1AC90 but that does not work on ICS. Launcher FC's on first boot but does not after reboot.
Could you please upload that booting rom? I tried it and it won't even install. Even if nothing works, I would like to try several things on that to see if I can fix it, so if you upload it I would be very thankful
davidnintendo said:
Could you please upload that booting rom? I tried it and it won't even install. Even if nothing works, I would like to try several things on that to see if I can fix it, so if you upload it I would be very thankful
Click to expand...
Click to collapse
Take a working Rom for zte, and replace everything except build.prop and meta-inf folder
Sent from my LG-P500 using xda premium
FezzFest said:
ICS on the Blade is booting!
But that's all it does
I used this ROM and replaced boot.img with CM N257. In the honeycomb port they fixed the flipped screen with patching libsurfaceflinger.so on offset 1AC90 but that does not work on ICS. Launcher FC's on first boot but does not after reboot.
Click to expand...
Click to collapse
So correct me if im wrong, but you got ics booting on blade by using the g2 rom and boot.img from CM7 Latest nightly?
If so maybe start a new thread to track progress.
furrabbit.nh said:
So correct me if im wrong, but you got ics booting on blade by using the g2 rom and boot.img from CM7 Latest nightly?
If so maybe start a new thread to track progress.
Click to expand...
Click to collapse
LGP500 got bootloop on that, but thats our phone, so thats maybe work yes
SWEATTAIMI said:
LGP500 got bootloop on that, but thats our phone, so thats maybe work yes
Click to expand...
Click to collapse
I just tried it 10mins ago, it installs fine does not boot at all, no logcat output... Wonder if he/made any tweaks elsewhere.
I have a O1 somewhere might dig it out, and have a look
I got it booting! Screen is fliped, touchscreen doesn't seem to work at all and I couldn't test anything else because I can't press OK on the first tutorial screen, but it may be something to start with!
I'm uploading it right now, but I think it will take a while as my connection isn't working very well right now, but I'll post the link as soon as it's finished.
EDIT: OK. You'll have to be patient. Apparently, my 20 MB symmetric shared connection doesn't want to upload faster than 50 KB/s. It's always like this in the afternoon: too many people using it LOL. Hopefully it will be uploaded in 25 minutes or so.
davidnintendo said:
I got it booting! Screen is fliped, touchscreen doesn't seem to work at all and I couldn't test anything else because I can't press OK on the first tutorial screen, but it may be something to start with!
I'm uploading it right now, but I think it will take a while as my connection isn't working very well right now, but I'll post the link as soon as it's finished.
Click to expand...
Click to collapse
Thanks
Sent from my LG-P500 using xda premium
OK, fixed flipped screen & resolution. Thanks to smg22rus for the modified libsurfaceflinger.so.
Flashable ROM (for devs only!) can be found here
If you fix something, just post what you did to get it fixed, do not upload the whole ROM again.
That way, this thread stays clean & we have only one ICS ROM (not 10 different ones).

[Q] Instructions on HowTo Port existing ROM?

Hello!
Since there is a fully working CM7 for Bravo (thanks Quarkx), does anyone know how can I port an existing ROM from Defy (example: WhiteRabbit 1.3 which is based on CM7)?
Anyways, here is the link of TweetyPeety's ROM: WhiteRabbit 1.3
http://forum.xda-developers.com/showthread.php?t=1510063
Thanks!
When I port Defy roms, I start by replacing the radio files with the ones that BravoMotorola posted in an earlier thread, adding in Quarx's camera libraries, editing media_profiles.xml, and editing the build.prop. There are a few apps included with some Defy roms, like Torch and Rom Updater, that are completely incompatible with the Bravo, and they need to be removed (or never used...).
I've attached a CWM compatible zip that removes the Defy radio, Defy camera libraries, Torch, Rom Updater, media_profiles.xml, and build.prop and replaces them with BravoMotorola's radio, Quarx's camera libraries, updated media_profiles.xml, and a CM72 compatible build.prop. I've tested this with various Quarx, Epsylon3, and Maniac103 CM7 nightlies and always had success.
If you want to use this for other Defy roms (not CM7 based) either remove or edit the build.prop accordingly and check\modify the updater-script to ensure it's compatible with the rom you want to use. By modify the updater-script, I mean to either add or remove apk's or libraries your custom rom may or may not have.
The libraries included are for Gingerbread roms and won't work on Froyo or ICS. Don't bother trying cause you'll bootloop at best, flash the sbf at worst. If anyone is interested, I can make a similar patch for Froyo roms, and an ICS patch for radio and apn settings. And don't bother asking about ICS camera, I've tried many, many, many library combos and no camera or bootloop. Your best bet on ICS camera is to donate to Quarx.
Install the included zip AFTER installing your rom.
Good luck on your Defy rom porting.
Newbery ryViewse
I've been using the White Rabbit 1.3 rom for the past 6 hours or so and have really been enjoying it. It does have a few issues though. The apn settings for att are incorrect so it won't connect (same as CM9) and I can't get usb tethering to work at all. At first, the phone recognizes usb as being connected, then when you enable, it instantly disables and the phone will bootloop every 5 minutes or so. Not really bootloop, but it does reset to the boot screen. It really sucks because this is a good rom I'd like to use but usb tethering is a must for me. Other than the tethering issue, this seemed to be stable rom and its worth trying it out.
I've included a patch to fix the camera, apn problems, and an edited build.prop. Install the rom as usuall, reboot to change to 2nd_boot, go to recovery and install the bravopatch-whiterabbit1.3.zip.
Does anybody know which program controls usb tethering? I suspect usb.apk but I'm not sure. Since I haven't had any problems whatsoever with Epsylon3's 20120212 nightly, I'll try using it's usb.apk and hope it works.
I tried upb.apk and usbd from 20120212 with no success, but it did stop the bootloop issue. I also noticed that this rom was based on KANG 20.02. I've never used or ported a KANG rom, so maybe the tethering issue is kang specific? I'll flash a kang rom tomorrow to check.
full
skeevy420 said:
I've been using the White Rabbit 1.3 rom for the past 6 hours or so and have really been enjoying it. It does have a few issues though. The apn settings for att are incorrect so it won't connect (same as CM9) and I can't get usb tethering to work at all. At first, the phone recognizes usb as being connected, then when you enable, it instantly disables and the phone will bootloop every 5 minutes or so. Not really bootloop, but it does reset to the boot screen. It really sucks because this is a good rom I'd like to use but usb tethering is a must for me. Other than the tethering issue, this seemed to be stable rom and its worth trying it out.
I've included a patch to fix the camera, apn problems, and an edited build.prop. Install the rom as usuall, reboot to change to 2nd_boot, go to recovery and install the bravopatch-whiterabbit1.3.zip.
Does anybody know which program controls usb tethering? I suspect usb.apk but I'm not sure. Since I haven't had any problems whatsoever with Epsylon3's 20120212 nightly, I'll try using it's usb.apk and hope it works.
I tried upb.apk and usbd from 20120212 with no success, but it did stop the bootloop issue. I also noticed that this rom was based on KANG 20.02. I've never used or ported a KANG rom, so maybe the tethering issue is kang specific? I'll flash a kang rom tomorrow to check.
Click to expand...
Click to collapse
work full..
Edit
3g and Usb Tethering don't work. My apologies on that. I only use wifi and 3g only when necessary. Data plans suck. Calls work with good signal, not sure about texting, don't really text much.
It's fully working if you don't require usb tethering . The touchscreen in the installer is sometimes unresponsive when pressing the next and previous buttons, but the menu key works as next and back as back. No other issues with the installer. While it may have been wifi and running a lot of crap in a short time as a basic stress test, I thought the battery drained faster than usual.
The rom is worth checking out. I really like its theme and set up more than anything.
Just tried your patch, yet it I get the bad zip, and aborts... any ideas?
Sent from my MB525 using XDA
ianstump said:
Just tried your patch, yet it I get the bad zip, and aborts... any ideas?
Sent from my MB525 using XDA
Click to expand...
Click to collapse
After typing all of the below, I realized I for got to ask--Did you enable signature verification by accident or have a bad download? I've been using the cm72 patch since the day Quarx released a proper bravo rom and haven't ever had a bad zip error, and the white rabbit patch is identical to the cm72 patch other than the build.prop and apns-conf.xml. I'm not sure if it matters, but I've only used the wr patch with the recovery from epyslon3's latest cm72 nightly 0212.
If its the patch for white rabbit, remove the build.prop from the patch and remove the line
"/system/build.prop"); from /META-INF/com/google/android/updater-script. We probably had conflicting installer options. Once you reboot after updating both zips, make sure to boot into 2nd boot like the installer says...although 2nd init booted it up just fine after the initial post-install bootloop last night for me.
You'll also need to edit the build.prop for the camera and device settings with the ones I included. You also need to make sure do delete strings for flash under OLD Tags as well.
I have a habit of editing the build.prop manually before flashing a new rom, and the one in the patch was also the build.prop in the white rabbit rom, both times I installed it.
#///////////////////////////////////////////////
#OLD Tags///////////////////////////////////////
ro.media.capture.maxres=3m
ro.media.capture.classification=classA
ro.workaround.noautofocus=0
#///////////////////////////////////////////////
#[Product Tags]/////////////////////////////////
ro.product.model=MB520
ro.product.brand=MOTO
ro.product.name=MB520_KOBE
ro.product.device=umts_kobe
ro.product.board=kobe
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Motorola
ro.product.locale.language=en
ro.product.locale.region=US
ro.board.platform=omap3
#///////////////////////////////////////////////
#[Build Tags]///////////////////////////////////
ro.build.product=umts_kobe
ro.build.description=umts_kobe_emara-user 2.3.4 4.5.1-134_DFP-74 1313117579 release-keys
ro.build.fingerprint=MOTO/MB520_KOBE/umts_kobe:2.3.4/4.5.1-134_DFP-74/1313117579:user/release-keys
ro.cm.device=kobe
Tried out latest KANG cherry pick today and its usb tethering works, 3g doesn't however. Tried multiple basebands and replacing radio with no luck. The att apn wasn't correct, and fixing didn't help.
Also, the 3g on White Rabbit doesn't work either. Anybody here port a defy cm7 after 0212? Other than these two I really haven't, and I'm wondering if newer defy cm7's are bravo incompatible, glithcy, or just that the KANG cherry picks don't like us.
I've also since downloaded the White Rabbit patch from here and didn't get any zip errors. Here's how I installed if anybody's interested:
reboot recovery
select WhiteRabbitEdition-1.3.zip
English
Install Type->Custom
Rom Options->Full Wipe, Moto Defy MB525, Google Apps, ICS Standard
Tweaks Options->AGPS Version, CM7 Stock, Off, Gingerbread, Standard
Style Options->ExDialer, ADW Launcher, CM7 DSP Manager
No other changes
Exit Installer
apply bravopatch-whiterabbit1.3.zip
reboot to bootmenu
set 2nd_boot to default
reboot to bootloop
remove and insert battery
power on
enjoy
I just realized I downloaded it wrong. Working great! Thanks!
Sent from my MB520 using XDA
Does usb tethering and 3g work? I never had them working with White Rabbit. To be specific, does turning on wifi then using usb tethering work. I use my phone as a wireless nic instead of running an ethernet cable through the house to my linux box. Kinda hard to update debian with no internet.
Ugh miui Pikachu edition works before I try to make camera work then just bootloops... Darn it's such a good rom!
Sent from my MB520 using XDA App
How were you trying to make the camera work?
I've also heard good things about that rom, just haven't bothered trying it yet.
Also, the latest quarx cm7 nightly is pretty stable. Using it now... my earlier cm7 patch works, but a new line in build.prop is needed and the apn-conf.xml from the white rabbit patch is required unless you like setting up the apn each time. Actually, I've had to change\fix the apn-conf.xml for every cm7 nightly after epsylon3's feb 12 nightly. epsylon3's feb 12 nightly is a real good rom to use if you want a good defy rom to use. I used it as my primary rom till quarx's latest 7 and I'm switching to epsylon's tomorrow.
add to build.prop under #Default Network Type
ro.telephony.ril_class=motow3g
skeevy420 said:
How were you trying to make the camera work?
I've also heard good things about that rom, just haven't bothered trying it yet.
Also, the latest quarx cm7 nightly is pretty stable. Using it now... my earlier cm7 patch works, but a new line in build.prop is needed and the apn-conf.xml from the white rabbit patch is required unless you like setting up the apn each time. Actually, I've had to change\fix the apn-conf.xml for every cm7 nightly after epsylon3's feb 12 nightly. epsylon3's feb 12 nightly is a real good rom to use if you want a good defy rom to use. I used it as my primary rom till quarx's latest 7 and I'm switching to epsylon's tomorrow.
add to build.prop under #Default Network Type
ro.telephony.ril_class=motow3g
Click to expand...
Click to collapse
I tried using the CM7 patch that was posted earlier in the thread and it made it stuck at the M logo
Sent from my MB520 using XDA App
That's the problem, that patch was made for cm7 only.
The steps to PORT CAMERA ONLY to any GB ROM.
Does not work with MS2Ginger2.1
Do everything preflash.
Open WhateverRomForDefy.zip in Archive Manager
Under system/etc, delete cameraCalFileDef5m.bin & cameraCalFileDef8m.bin, and replace mot_ise_imager_cfg.bin & media_profiles.xml from cm7 patch
Under system/lib, replace libcamera.so, libcamera_client.so, & libcameraservice.so with the same from cm7 patch.
Edit build.prop for camera like in post 7 under the OLD Tags. While the post is for WR, the camera changes are the same, & all changes are almost at bottom of build.prop. If you can read, you'll see them....
If the above doesn't work, whatever rom your trying is either
That's how I port roms normally. Again this is bare minimum camera. If that doesn't work, you\we're up the that creek with that rom in regards to the camera. FYI, I do all my rom edits with Archive Manager and GEdit\JEdit on Debian Linux. I'm not sure of the Windows alternative (7zip and Notepad++ I'd imagine) cause I haven't used Windows for anything more than SuperOneClick and other Win exclusive\non-wineable apps since XP was released....Win2K was awesome, I miss it.
skeevy420 said:
That's the problem, that patch was made for cm7 only.
The steps to PORT CAMERA ONLY to any GB ROM.
Do everything preflash.
Open WhateverRomForDefy.zip in Archive Manager
Under system/etc, delete cameraCalFileDef5m.bin & cameraCalFileDef8m.bin, and replace mot_ise_imager_cfg.bin & media_profiles.xml from cm7 patch
Under system/lib, replace libcamera.so, libcamera_client.so, & libcameraservice.so with the same from cm7 patch.
Edit build.prop for camera like in post 7 under the OLD Tags. While the post is for WR, the camera changes are the same, & all changes are almost at bottom of build.prop. If you can read, you'll see them....
If the above doesn't work, whatever rom your trying is either
That's how I port roms normally. Again this is bare minimum camera. If that doesn't work, you\we're up the that creek with that rom in regards to the camera. FYI, I do all my rom edits with Archive Manager and GEdit\JEdit on Debian Linux. I'm not sure of the Windows alternative (7zip and Notepad++ I'd imagine) cause I haven't used Windows for anything more than SuperOneClick and other Win exclusive\non-wineable apps since XP was released....Win2K was awesome, I miss it.
Click to expand...
Click to collapse
Thanks man. I will try later.
Sent from my MB520 using XDA App
Any luck? I have some free time today and can make a pikachu patch if necessary. Currently I'm trying out Idiot to port the WR framework over to Epsy's latest nightly.
Why are most of the cool Droid tools windows/dos based? You'd think there'd be more Linux tools for modding a Linux-based os.
skeevy420 said:
Any luck? I have some free time today and can make a pikachu patch if necessary. Currently I'm trying out Idiot to port the WR framework over to Epsy's latest nightly.
Why are most of the cool Droid tools windows/dos based? You'd think there'd be more Linux tools for modding a Linux-based os.
Click to expand...
Click to collapse
If you want you can me a pikachu patch. I won't have time today to try it out
Sent from my MB520 using XDA App
Got busy with MSGinger today.....I'll have a patch up sometime tomorrow.
marquae11 said:
If you want you can me a pikachu patch. I won't have time today to try it out
Sent from my MB520 using XDA App
Click to expand...
Click to collapse
Here ya go. Got busy with real life the past few days. This isn't flashable, but isn't hard to do either.
Instructions:
Open PikachuEdition2.3.2b.zip
Delete boot.img and devtree.img
Replace files under /system with the ones provided
Make sure to delete the *.jordan.so's under /system/lib/hw
Replace updater-script @ /META-INF/com/google/android/updater-script
When Installing:
Install as Defy
Don't use any Defy+ options or settings, some of them change files we just replaced.
Thanks man! You are helping us alot!

[rom] [35 kernel] [u8800] cm-7.2.0-RC0-u8800-Geno-120309-final

I don't know why geno don't update his thread, but it is latest cm for 35 kernel by genokolar, with new kernel, so, sound problems fixed. Beats audio works here, and rom is quite stable. Some chineese apps, and no standart keyboard, contains all languages that android have. Installation via clockworkmod, with 3 wipes, i used 5.5.0.4. After official 2.3 (or other custom roms on 35 kernel, including dzo's aurora) of course.
Download:
Rom
http://qrac.zapto.org/
http://server.streznik.org/
Mediafire link:
http://www.mediafire.com/?6rbbjzo2oyu1mmq
many thanks to R4DK0 for uploading.
Gapps: (some people don't have them, installation via cwm)
http://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip
or
http://www.mediafire.com/?sjo91bg2h5rtael
another version of google apps:
http://www.mediafire.com/?33hwsyhq67um9hh
Gingerbread Keyboard:
Look attachments, languages are:
Russan
Ukraine
English
German
French
Spanish
Italian
Beats Audio:
http://forum.xda-developers.com/showthread.php?t=1525670
To delete chineese apps, get estrongs file manager in google play, (it's free), then open it, menu button->settings->tip root explorer and system folders->back->click "star" (favorite)->click "phone"->go to system/app, and delete apps you didn't need like usual files. Yes, i know this rom have root exploer pre installed, but it's chineese...
aawhh, i tried to upload it on 4shared, but i failed for 2 times
on 90%, so i'm tired... Maybe someone else will mirror it... My internet connection sucks...
Mirror of the final CM7 .35kernel version you can get it here (it is my webserver, 20Mbps link, no capping, if one is slow, try the other one - independant internet connections)
http://qrac.zapto.org/
http://server.streznik.org/
A lot of users, including me, migrated to ICS from dzo. I felt left outside, when there were no updates from geno, although I loved CM7, my love is currently dzo's ICS. Though, I will give this ROM one more shot.
edit:
Mediafire links:
http://www.mediafire.com/?sjo91bg2h5rtael
http://www.mediafire.com/?6rbbjzo2oyu1mmq
R4DK0 said:
Mirror of the final CM7
Click to expand...
Click to collapse
ohh, thank you very much, updated 1st post. I also tried dzo's ics, it is really nice, but i need good sound from my phone... I'm just waiting dzo to fix sound quality...
Did you try the newest version, 2.0 or possibly 2.01_test one? Few things arent are how they are supposed to be, but sound quality is not one of them.
I am currently backing up my ICS and will try the CM7.
R4DK0 said:
Did you try the newest version, 2.0 or possibly 2.01_test one? Few things arent are how they are supposed to be, but sound quality is not one of them.
I am currently backing up my ICS and will try the CM7.
Click to expand...
Click to collapse
I used 1.13. With beats audio and cm libs it is much better. I even can connect it to behringer b215xl (professional 1000 watt loudspeakers) via behringer 1832fx and ep1500 amplifer at my work, sound is good. But it was terrible on ics...
yod123 said:
ohh, thank you very much, updated 1st post. I also tried dzo's ics, it is really nice, but i need good sound from my phone... I'm just waiting dzo to fix sound quality...
Click to expand...
Click to collapse
I'm sorry, but if you want the best sound quality from U8800, then you must use a .32 kernel based ROM. I've done that and the difference is just to much to return to .35
Sent from my U8800
fjsferreira said:
I'm sorry, but if you want the best sound quality from U8800, then you must use a .32 kernel based ROM. I've done that and the difference is just to much to return to .35
Sent from my U8800
Click to expand...
Click to collapse
Yes, you're right. But i wanted to try ics, and now i'm lazy to return on 2.2. Of course i don't use my phone to play music on work, however sound quality from pc whould better, but i enjoy heavy metal on breaks (pc and other devices is not mine).
latest beats audio http://forum.xda-developers.com/showthread.php?t=1525670
thanks. really works better
I cant decide/say if it is anything better with beats audio, probably a placebo if I say its better. My ears are screwed from listing music too loud on my loudspeakers.
edit:
Added FULL gapps on the backup mirror.
Did you get the keyboard working from the link in first post? Mine just keeps force closing.
I have ics keyboard but it is only english.
Thanks for this rom, have been using Aurora, but I really miss all these cm tweaks!
Edit: found more languages for ics keyboard, but no dictionary.
Actually, i did't test it. I using the same but there are english and russian only.
thank you for reply, working gingerbread keyboard added to the 1st post.
Amazing rom. Have everything working smooth. even wifi thethering. Dunno why geno didn't update here.
I've edited .zip ROM file with GB working stock keyboard, included GAPPS, replaced Browser, replaced Mms.apk with one modified to recieve MMS even with data off, deleted the chinese apps and edited 3 lines in build.prop.
It's working like I want
Oh and battery dropped 2% last night, pretty good for a .35 kernel based rom.
what did u replaced? im curious to know despite dont like the darkness of this rom im available to try again with your modifications...
if u let me...
inculto said:
what did u replaced? im curious to know despite dont like the darkness of this rom im available to try again with your modifications...
if u let me...
Click to expand...
Click to collapse
The darkness? Is this Rom from the dark side?
Loureiro said:
I've edited .zip ROM file with GB working stock keyboard, included GAPPS, replaced Browser, replaced Mms.apk with one modified to recieve MMS even with data off, deleted the chinese apps and edited 3 lines in build.prop
Click to expand...
Click to collapse
Hey, Loureiro, could you upload your build somewhere an share with us??
fjsferreira said:
The darkness? Is this Rom from the dark side?
Click to expand...
Click to collapse
lool the look of it...
Can someone inform us if internal mic works while headphones are plugged?

ICS AOKP ROM for the u8800

This is an AOKP ROM for the u8800. It is ported from Huawei Honor B977 4.0.3. I'd like to know if anyone else has tried this and what they think. It's a chinese rom from the anzhi forums (original thread)
I flashed this ROM just now ( thanks fjsferreira for the mirror), this is my feedback:
- Fast, smooth (on par with Aurora).
- Wifi, mobile data, bluetooth, and the like work.
- No gapps, Play Store, camera, browser...(you pretty much have to install everything yourself).
- No strip unicode in the Mms.apk.
- Popup notification support in the Mms.apk.
- Cool AOKP tweaks (naturally...).
- No theme-chooser (meaning you'll have to stick with the mix of Touchwiz 5, ICS and lots of tranparency that is the UI).
- Long pressing the Home key doesn't show the multi-tasking interface and doesn't take you to the Homescreen.
- The SEARCH key is set to turn off the screen (to revert it to its normal function (searching!), check this post).
- I'll add more feedback information as more people try it and report.
Download link: http://pan.baidu.com/share/link?shareid=22964&uk=2499982078.
Mirror: https://docs.google.com/open?id=0B4ZMZwAV0MEaVUUzMjRDM2JyXzg
MtG92 said:
I found his AOKP ROM for our u8800, I'm about to try it, and when I do I'll post some feedback here. Also, I'd like to know if anyone else has tried this and what they think. It's a chinese rom from the anzhi forums (original thread)
Download link: http://pan.baidu.com/share/link?shareid=22964&uk=2499982078.
Btw, as soon as I finish downloading I'll put it up on mediafire or dropbox, but if someone else already has it feel free to post a link.
Click to expand...
Click to collapse
;
when finished installing please let us know how it is diffetent from aurora.
MtG92 said:
I found his AOKP ROM for our u8800, I'm about to try it, and when I do I'll post some feedback here. Also, I'd like to know if anyone else has tried this and what they think. It's a chinese rom from the anzhi forums (original thread)
Download link: http://pan.baidu.com/share/link?shareid=22964&uk=2499982078.
Btw, as soon as I finish downloading I'll put it up on mediafire or dropbox, but if someone else already has it feel free to post a link.
Click to expand...
Click to collapse
Make sure the system folder fits in your system partition. I think you need to chacge the partitions in order to flash this, but I'm not sure. Our phone's default system partition is 210 mb
Has anyone tried it? Or have mirror?
I would love to give a try, but download time shows me 18 hours...
I have tried the previous ver actually..... Partition is a must, otherwise phone wont pass Huawei logo. Its ported from Huawei Honor ...every thing works well but Home key does not work..... But be aware some time it happens that you cant return to stock partition and you wont be able to Flash official 2.3 or Froyo ROM back.
krish_nank said:
I have tried the previous ver actually..... Partition is a must, otherwise phone wont pass Huawei logo. Its ported from Huawei Honor ...every thing works well but Home key does not work..... But be aware some time it happens that you cant return to stock partition and you wont be able to Flash official 2.3 or Froyo ROM back.
Click to expand...
Click to collapse
deleting files fron /system/app of zip file can work.
mittalmailbox said:
deleting files fron /system/app of zip file can work.
Click to expand...
Click to collapse
I haven't tried that way, you can try once.... All 4.0 official ROM designed for U8800 PRO also officially they have made .app file for changing the partition to install ICS so i doubt it will work.
MtG92 said:
I found his AOKP ROM for our u8800, I'm about to try it, and when I do I'll post some feedback here. Also, I'd like to know if anyone else has tried this and what they think. It's a chinese rom from the anzhi forums (original thread)
Download link: http://pan.baidu.com/share/link?shareid=22964&uk=2499982078.
Btw, as soon as I finish downloading I'll put it up on mediafire or dropbox, but if someone else already has it feel free to post a link.
Click to expand...
Click to collapse
Actually this version is much smaller (109MB) than the previous (180MB), so it may not need re-partitioning. It has a ".UP" suffix so maybe it is an update flashable only and you need the previous installed, but I can't know since I cannot download it. It just goes soooooo slowwww....
camera not working
spirosbond said:
Actually this version is much smaller (109MB) than the previous (180MB), so it may not need re-partitioning. It has a ".UP" suffix so maybe it is an update flashable only and you need the previous installed, but I can't know since I cannot download it. It just goes soooooo slowwww....
Click to expand...
Click to collapse
I know, right? I left the computer on and went to the beach but when I came back the file only had 86mb out of the 109mb...I'll have to try again tomorrow, since it will probably take some 4 hours to download.
Sent from my u8800 using xda premium
MtG92 said:
I know, right? I left the computer on and went to the beach but when I came back the file only had 86mb out of the 109mb...I'll have to try again tomorrow, since it will probably take some 4 hours to download.
Sent from my u8800 using xda premium
Click to expand...
Click to collapse
If you guys use something to stabilize the download, like free download manager, speed is always above 800 KB/s (I've just finished my download, took less than 3mins)
http://i.imgur.com/5kkae.jpg
EDIT: anyway, here it is
https://docs.google.com/open?id=0B4ZMZwAV0MEaVUUzMjRDM2JyXzg
(I didn't try this ROM yet, and probably won't, Aurora is completely stable for me right now)
Well, just went ahead and tried the ROM. From my 10 minutes playing with it, everything seems to work, wifi, mobile data, bluetooth and camera (camera isn't included by default, you have to install one).
Also, no market by default, you have to manually edit the zip file and include the market apk in it.
Sadly I had to uninstall it after 10 mins because, and I'm seeing this more and more, the dev completely screwed up the UI... it's simply horrible, it's not default AOKP at all... He made a complete mess with icons from samsung, an horrible background in every app, horrible popups and menus, etc... I didn't like that at all. I didn't even took the time to create screenshots, I'm sorry, because it was burning my eyes...
There are some stuff completely in chinese, in the ROM control area of the settings, but overall, you can choose any language that Android includes. Note, while the theme of the UI isn't AOKP, the ROM itself is, with the usual settings AOKP provides,
Performance wise, I saw no difference than with aurora...
OP updated with working/ not working features.
Sent from my u8800 using xda premium
MtG92 said:
OP updated with working/ not working features.
Sent from my u8800 using xda premium
Click to expand...
Click to collapse
You can include this too... Its ported from Huawei Honor 4.0 977 ver ROM and home key doesn't show recent apps opened and doesn't take you to home either.
theres an update that i still haven't figured out what has changed exempt a few framework-res changes but heres the link to the original forum anyway: http://bbs.anzhi.com/thread-5635142-1-1.html
and the download to the rom: http://pan.baidu.com/share/link?shareid=30727&uk=2499982078
EDIT: I have fixed the home key not working so now that works 100%!!!
I will try fix a couple of other things then i will upload the rom for everyone to enjoy.
dc959 said:
theres an update that i still haven't figured out what has changed exempt a few framework-res changes but heres the link to the original forum anyway: http://bbs.anzhi.com/thread-5635142-1-1.html
and the download to the rom: http://pan.baidu.com/share/link?shareid=30727&uk=2499982078
EDIT: I have fixed the home key not working so now that works 100%!!!
I will try fix a couple of other things then i will upload the rom for everyone to enjoy.
Click to expand...
Click to collapse
Thanks. I reverted to the good old .32 kernel yesterday, so I won't be testing this one for now. However, I'll still update the OP with the links to the latest version and the features/bugs list.
dc959 said:
theres an update that i still haven't figured out what has changed exempt a few framework-res changes but heres the link to the original forum anyway: http://bbs.anzhi.com/thread-5635142-1-1.html
and the download to the rom: http://pan.baidu.com/share/link?shareid=30727&uk=2499982078
EDIT: I have fixed the home key not working so now that works 100%!!!
I will try fix a couple of other things then i will upload the rom for everyone to enjoy.
Click to expand...
Click to collapse
Thank you.
Can you also get rid of the wannabe Touchwiz UI?
Davoss said:
Thank you.
Can you also get rid of the wannabe Touchwiz UI?
Click to expand...
Click to collapse
That Is something that I'd on my to do list but right now I'd rather be able to use the rom for longer then 16 hours and I also want to fix some ui isuess.
Is auto brightness working for you guys ?
Sent from my u8800
spirosbond said:
Is auto brightness working for you guys ?
Sent from my u8800
Click to expand...
Click to collapse
no it isn't working but i am going to try get it working in my release but first i want to get the battery drain issue solved

Categories

Resources