Hello!
Since there is a fully working CM7 for Bravo (thanks Quarkx), does anyone know how can I port an existing ROM from Defy (example: WhiteRabbit 1.3 which is based on CM7)?
Anyways, here is the link of TweetyPeety's ROM: WhiteRabbit 1.3
http://forum.xda-developers.com/showthread.php?t=1510063
Thanks!
When I port Defy roms, I start by replacing the radio files with the ones that BravoMotorola posted in an earlier thread, adding in Quarx's camera libraries, editing media_profiles.xml, and editing the build.prop. There are a few apps included with some Defy roms, like Torch and Rom Updater, that are completely incompatible with the Bravo, and they need to be removed (or never used...).
I've attached a CWM compatible zip that removes the Defy radio, Defy camera libraries, Torch, Rom Updater, media_profiles.xml, and build.prop and replaces them with BravoMotorola's radio, Quarx's camera libraries, updated media_profiles.xml, and a CM72 compatible build.prop. I've tested this with various Quarx, Epsylon3, and Maniac103 CM7 nightlies and always had success.
If you want to use this for other Defy roms (not CM7 based) either remove or edit the build.prop accordingly and check\modify the updater-script to ensure it's compatible with the rom you want to use. By modify the updater-script, I mean to either add or remove apk's or libraries your custom rom may or may not have.
The libraries included are for Gingerbread roms and won't work on Froyo or ICS. Don't bother trying cause you'll bootloop at best, flash the sbf at worst. If anyone is interested, I can make a similar patch for Froyo roms, and an ICS patch for radio and apn settings. And don't bother asking about ICS camera, I've tried many, many, many library combos and no camera or bootloop. Your best bet on ICS camera is to donate to Quarx.
Install the included zip AFTER installing your rom.
Good luck on your Defy rom porting.
Newbery ryViewse
I've been using the White Rabbit 1.3 rom for the past 6 hours or so and have really been enjoying it. It does have a few issues though. The apn settings for att are incorrect so it won't connect (same as CM9) and I can't get usb tethering to work at all. At first, the phone recognizes usb as being connected, then when you enable, it instantly disables and the phone will bootloop every 5 minutes or so. Not really bootloop, but it does reset to the boot screen. It really sucks because this is a good rom I'd like to use but usb tethering is a must for me. Other than the tethering issue, this seemed to be stable rom and its worth trying it out.
I've included a patch to fix the camera, apn problems, and an edited build.prop. Install the rom as usuall, reboot to change to 2nd_boot, go to recovery and install the bravopatch-whiterabbit1.3.zip.
Does anybody know which program controls usb tethering? I suspect usb.apk but I'm not sure. Since I haven't had any problems whatsoever with Epsylon3's 20120212 nightly, I'll try using it's usb.apk and hope it works.
I tried upb.apk and usbd from 20120212 with no success, but it did stop the bootloop issue. I also noticed that this rom was based on KANG 20.02. I've never used or ported a KANG rom, so maybe the tethering issue is kang specific? I'll flash a kang rom tomorrow to check.
full
skeevy420 said:
I've been using the White Rabbit 1.3 rom for the past 6 hours or so and have really been enjoying it. It does have a few issues though. The apn settings for att are incorrect so it won't connect (same as CM9) and I can't get usb tethering to work at all. At first, the phone recognizes usb as being connected, then when you enable, it instantly disables and the phone will bootloop every 5 minutes or so. Not really bootloop, but it does reset to the boot screen. It really sucks because this is a good rom I'd like to use but usb tethering is a must for me. Other than the tethering issue, this seemed to be stable rom and its worth trying it out.
I've included a patch to fix the camera, apn problems, and an edited build.prop. Install the rom as usuall, reboot to change to 2nd_boot, go to recovery and install the bravopatch-whiterabbit1.3.zip.
Does anybody know which program controls usb tethering? I suspect usb.apk but I'm not sure. Since I haven't had any problems whatsoever with Epsylon3's 20120212 nightly, I'll try using it's usb.apk and hope it works.
I tried upb.apk and usbd from 20120212 with no success, but it did stop the bootloop issue. I also noticed that this rom was based on KANG 20.02. I've never used or ported a KANG rom, so maybe the tethering issue is kang specific? I'll flash a kang rom tomorrow to check.
Click to expand...
Click to collapse
work full..
Edit
3g and Usb Tethering don't work. My apologies on that. I only use wifi and 3g only when necessary. Data plans suck. Calls work with good signal, not sure about texting, don't really text much.
It's fully working if you don't require usb tethering . The touchscreen in the installer is sometimes unresponsive when pressing the next and previous buttons, but the menu key works as next and back as back. No other issues with the installer. While it may have been wifi and running a lot of crap in a short time as a basic stress test, I thought the battery drained faster than usual.
The rom is worth checking out. I really like its theme and set up more than anything.
Just tried your patch, yet it I get the bad zip, and aborts... any ideas?
Sent from my MB525 using XDA
ianstump said:
Just tried your patch, yet it I get the bad zip, and aborts... any ideas?
Sent from my MB525 using XDA
Click to expand...
Click to collapse
After typing all of the below, I realized I for got to ask--Did you enable signature verification by accident or have a bad download? I've been using the cm72 patch since the day Quarx released a proper bravo rom and haven't ever had a bad zip error, and the white rabbit patch is identical to the cm72 patch other than the build.prop and apns-conf.xml. I'm not sure if it matters, but I've only used the wr patch with the recovery from epyslon3's latest cm72 nightly 0212.
If its the patch for white rabbit, remove the build.prop from the patch and remove the line
"/system/build.prop"); from /META-INF/com/google/android/updater-script. We probably had conflicting installer options. Once you reboot after updating both zips, make sure to boot into 2nd boot like the installer says...although 2nd init booted it up just fine after the initial post-install bootloop last night for me.
You'll also need to edit the build.prop for the camera and device settings with the ones I included. You also need to make sure do delete strings for flash under OLD Tags as well.
I have a habit of editing the build.prop manually before flashing a new rom, and the one in the patch was also the build.prop in the white rabbit rom, both times I installed it.
#///////////////////////////////////////////////
#OLD Tags///////////////////////////////////////
ro.media.capture.maxres=3m
ro.media.capture.classification=classA
ro.workaround.noautofocus=0
#///////////////////////////////////////////////
#[Product Tags]/////////////////////////////////
ro.product.model=MB520
ro.product.brand=MOTO
ro.product.name=MB520_KOBE
ro.product.device=umts_kobe
ro.product.board=kobe
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Motorola
ro.product.locale.language=en
ro.product.locale.region=US
ro.board.platform=omap3
#///////////////////////////////////////////////
#[Build Tags]///////////////////////////////////
ro.build.product=umts_kobe
ro.build.description=umts_kobe_emara-user 2.3.4 4.5.1-134_DFP-74 1313117579 release-keys
ro.build.fingerprint=MOTO/MB520_KOBE/umts_kobe:2.3.4/4.5.1-134_DFP-74/1313117579:user/release-keys
ro.cm.device=kobe
Tried out latest KANG cherry pick today and its usb tethering works, 3g doesn't however. Tried multiple basebands and replacing radio with no luck. The att apn wasn't correct, and fixing didn't help.
Also, the 3g on White Rabbit doesn't work either. Anybody here port a defy cm7 after 0212? Other than these two I really haven't, and I'm wondering if newer defy cm7's are bravo incompatible, glithcy, or just that the KANG cherry picks don't like us.
I've also since downloaded the White Rabbit patch from here and didn't get any zip errors. Here's how I installed if anybody's interested:
reboot recovery
select WhiteRabbitEdition-1.3.zip
English
Install Type->Custom
Rom Options->Full Wipe, Moto Defy MB525, Google Apps, ICS Standard
Tweaks Options->AGPS Version, CM7 Stock, Off, Gingerbread, Standard
Style Options->ExDialer, ADW Launcher, CM7 DSP Manager
No other changes
Exit Installer
apply bravopatch-whiterabbit1.3.zip
reboot to bootmenu
set 2nd_boot to default
reboot to bootloop
remove and insert battery
power on
enjoy
I just realized I downloaded it wrong. Working great! Thanks!
Sent from my MB520 using XDA
Does usb tethering and 3g work? I never had them working with White Rabbit. To be specific, does turning on wifi then using usb tethering work. I use my phone as a wireless nic instead of running an ethernet cable through the house to my linux box. Kinda hard to update debian with no internet.
Ugh miui Pikachu edition works before I try to make camera work then just bootloops... Darn it's such a good rom!
Sent from my MB520 using XDA App
How were you trying to make the camera work?
I've also heard good things about that rom, just haven't bothered trying it yet.
Also, the latest quarx cm7 nightly is pretty stable. Using it now... my earlier cm7 patch works, but a new line in build.prop is needed and the apn-conf.xml from the white rabbit patch is required unless you like setting up the apn each time. Actually, I've had to change\fix the apn-conf.xml for every cm7 nightly after epsylon3's feb 12 nightly. epsylon3's feb 12 nightly is a real good rom to use if you want a good defy rom to use. I used it as my primary rom till quarx's latest 7 and I'm switching to epsylon's tomorrow.
add to build.prop under #Default Network Type
ro.telephony.ril_class=motow3g
skeevy420 said:
How were you trying to make the camera work?
I've also heard good things about that rom, just haven't bothered trying it yet.
Also, the latest quarx cm7 nightly is pretty stable. Using it now... my earlier cm7 patch works, but a new line in build.prop is needed and the apn-conf.xml from the white rabbit patch is required unless you like setting up the apn each time. Actually, I've had to change\fix the apn-conf.xml for every cm7 nightly after epsylon3's feb 12 nightly. epsylon3's feb 12 nightly is a real good rom to use if you want a good defy rom to use. I used it as my primary rom till quarx's latest 7 and I'm switching to epsylon's tomorrow.
add to build.prop under #Default Network Type
ro.telephony.ril_class=motow3g
Click to expand...
Click to collapse
I tried using the CM7 patch that was posted earlier in the thread and it made it stuck at the M logo
Sent from my MB520 using XDA App
That's the problem, that patch was made for cm7 only.
The steps to PORT CAMERA ONLY to any GB ROM.
Does not work with MS2Ginger2.1
Do everything preflash.
Open WhateverRomForDefy.zip in Archive Manager
Under system/etc, delete cameraCalFileDef5m.bin & cameraCalFileDef8m.bin, and replace mot_ise_imager_cfg.bin & media_profiles.xml from cm7 patch
Under system/lib, replace libcamera.so, libcamera_client.so, & libcameraservice.so with the same from cm7 patch.
Edit build.prop for camera like in post 7 under the OLD Tags. While the post is for WR, the camera changes are the same, & all changes are almost at bottom of build.prop. If you can read, you'll see them....
If the above doesn't work, whatever rom your trying is either
That's how I port roms normally. Again this is bare minimum camera. If that doesn't work, you\we're up the that creek with that rom in regards to the camera. FYI, I do all my rom edits with Archive Manager and GEdit\JEdit on Debian Linux. I'm not sure of the Windows alternative (7zip and Notepad++ I'd imagine) cause I haven't used Windows for anything more than SuperOneClick and other Win exclusive\non-wineable apps since XP was released....Win2K was awesome, I miss it.
skeevy420 said:
That's the problem, that patch was made for cm7 only.
The steps to PORT CAMERA ONLY to any GB ROM.
Do everything preflash.
Open WhateverRomForDefy.zip in Archive Manager
Under system/etc, delete cameraCalFileDef5m.bin & cameraCalFileDef8m.bin, and replace mot_ise_imager_cfg.bin & media_profiles.xml from cm7 patch
Under system/lib, replace libcamera.so, libcamera_client.so, & libcameraservice.so with the same from cm7 patch.
Edit build.prop for camera like in post 7 under the OLD Tags. While the post is for WR, the camera changes are the same, & all changes are almost at bottom of build.prop. If you can read, you'll see them....
If the above doesn't work, whatever rom your trying is either
That's how I port roms normally. Again this is bare minimum camera. If that doesn't work, you\we're up the that creek with that rom in regards to the camera. FYI, I do all my rom edits with Archive Manager and GEdit\JEdit on Debian Linux. I'm not sure of the Windows alternative (7zip and Notepad++ I'd imagine) cause I haven't used Windows for anything more than SuperOneClick and other Win exclusive\non-wineable apps since XP was released....Win2K was awesome, I miss it.
Click to expand...
Click to collapse
Thanks man. I will try later.
Sent from my MB520 using XDA App
Any luck? I have some free time today and can make a pikachu patch if necessary. Currently I'm trying out Idiot to port the WR framework over to Epsy's latest nightly.
Why are most of the cool Droid tools windows/dos based? You'd think there'd be more Linux tools for modding a Linux-based os.
skeevy420 said:
Any luck? I have some free time today and can make a pikachu patch if necessary. Currently I'm trying out Idiot to port the WR framework over to Epsy's latest nightly.
Why are most of the cool Droid tools windows/dos based? You'd think there'd be more Linux tools for modding a Linux-based os.
Click to expand...
Click to collapse
If you want you can me a pikachu patch. I won't have time today to try it out
Sent from my MB520 using XDA App
Got busy with MSGinger today.....I'll have a patch up sometime tomorrow.
marquae11 said:
If you want you can me a pikachu patch. I won't have time today to try it out
Sent from my MB520 using XDA App
Click to expand...
Click to collapse
Here ya go. Got busy with real life the past few days. This isn't flashable, but isn't hard to do either.
Instructions:
Open PikachuEdition2.3.2b.zip
Delete boot.img and devtree.img
Replace files under /system with the ones provided
Make sure to delete the *.jordan.so's under /system/lib/hw
Replace updater-script @ /META-INF/com/google/android/updater-script
When Installing:
Install as Defy
Don't use any Defy+ options or settings, some of them change files we just replaced.
Thanks man! You are helping us alot!
Related
Hello guys. I know this is for Android development while what im posting should be in general section but i want to point out that on certain custom ROM like Darky ROM, when i apply Voodoo lag fix, my wifi connection on the galaxy S stopped working on WPA/WPA2 EAP.
According to a few sites, this is normal in 2.2.1 as the software itself is buggy. I dont experience this on my Motorola Droid running 2.2.1 but on galaxy s, it doesnt work.
I search in this forum but ive found no ans, so i google it. and apparently theres a bug fix for the wpa_supplicant
http://www.dead-end.info/wp-content/uploads/2010/12/wpa_supplicant_froyo_eap.gz
Download this in replace your current one in system/bin/wpa_supplicant.
Credit goes to Cova at http://www.dead-end.info/2010/12/13/samsung-galaxy-s-froyo-wpa_supplicant-fix.
All developers should replace their WPA_supplicant with these in all the 2.2.1 rom and perhaps 2.3 rom too.
Cheers! Now my galaxy S is able to connect to my home network on wpa2!
Hi,
me run Darky v.7 Rom too, and guess what ... no wifi wpa/wpa2 problems here!
so no need to install stuff like this
Yeah. Only for those who have these problem. i have the problem after i enabled voodoo. I tried reflashing clean and then apply darky rom, i dont have tht problem too. but once i enabled voodoo, the problem came. Ures has voodoo on?
yep voodoo enabled! even on /system
Just for Info:
On 2.6.35 / gingerbread the kernel module bcm43XX.ko at /system/modules/ must match the kernel.
It means when you compile a kernel, you've to use the bcm kernel module which will be compiled with these kernel. Otherwise Wifi won't work at all.
It's not possible to flash another kernel without replacing the module.
Hi
Running darkys 8.0 rom and it's not working on the WPA/WPA2 EAP at work. Tried your file change but it did nothing ..
codeworkx said:
Just for Info:
On 2.6.35 / gingerbread the kernel module bcm43XX.ko at /system/modules/ must match the kernel.
It means when you compile a kernel, you've to use the bcm kernel module which will be compiled with these kernel. Otherwise Wifi won't work at all.
It's not possible to flash another kernel without replacing the module.
Click to expand...
Click to collapse
Good info to know.
Thanks codeworkx
Your File is Not Working Here is Working file with how to do it
http://www.emoiz.com/how-to-connect-samsung-galaxy-s-to-ad-hoc-wifi-network
this worked 100%
you neet to root the phone and use root explorer to acces it, replace the file with the new one, good as new
but this files still doesn't work with WPA-EAP access points
On xwjv1, no need this, as I can connect to most wifi network...
Sent from my GT-I9000 using XDA App
Howdy.
I think I may have a Cyanogenmod 6.1 Ver ready, but the updater-script needs some updating (I think).
Based on Neopeeks rom, made with the ROM kitchen.
Download link:
http://dl.dropbox.com/u/31118/cm611-u8800test-wk.zip
Don't have a U8800 myself, need someone to test it.
If some more experienced dev could take a look at it i'd appreciate that.
However it should be ready for flashing.
(I don't have a U8800 myself, so I can't test it.)
Thanks for your work ,thought I can't download due to my network
Sent from my u8800 using XDA App
This is for HTC bravo? I think someone allready tried and it didnt work...
Otherwise, got installation aborted...
sanpsa said:
This is for HTC bravo? I think someone allready tried and it didnt work...
Otherwise, got installation aborted...
Click to expand...
Click to collapse
Yes, using bravo as base, but it shouldn't matter, kernel is from U8800 along with drivers.
it seems that the rom is not match with the u8800.
298800577 said:
it seems that the rom is not match with the u8800.
Click to expand...
Click to collapse
could u share more of ur experience with this rom?
What exactly have you changed with this rom? Why did you choose the Desire rom? First up you need a new /system/build.prop then you need to edit the /META-INF/com/google/android/updater-script.orig file so it flashes stuff to the right locations. Then you need to change the ro.product.device so it matches the build.prop file. Then to top it off the bravo uses the MTD partitioning scheme but the u8800 uses the EMMC partitioning scheme. So to put it simply, the rom will not work without many changes.
Yeah it also seems to have modules built for 2.6.35.9 (including a bcm4329 driver whereas this phone uses a Qualcomm RF chip, I believe WCN1312).
atleast some work is going On
Updated the ROM, should work now- Can anyone test?
Doesnt work...
anyone checked? i ve recovery problem i cant apply this rom right now
The update script needs work
Ice Cream Zenwich Beta RC 1.1
This is a port of the Ice Cream Zenwich RC 1.1. In no way what so ever did I make this rom.
Here is the link to his ROM- http://forum.xda-developers.com/showthread.php?t=1499455
Change Log in Third Post
Add-Ons in Second Post
Primary sources for this rom are included but not limited to:
BHuvan goyal - Initial work on the AOKP port for the i9000: http://forum.xda-developers.com/show....php?t=1489213
Team Kang - The AOKP Project, the Framework, RomControl and other apps: https://sites.google.com/site/androidopenkangproject/
Team ICSSGS - Sourced some binaries, apps, and other assorted files for functionality: http://code.google.com/p/ice-cream-sandwich-sgs/
Team Hacksung - I am positive there is something CM9 in there somewhere
A handful of themers in the Nexus S and Galaxy Nexus forums - inverted apps, I'll track them all down and list them here soon.
*I am also interested in suggestions for improvements. Please post these in the thread as well.
If you guys post suggestions and bugs I will will be sure to tell Br1cK'd(the dev)
Disclaimer
I cannot be held responsible for what happens to your device, face it, by this point, your warranty is out the window. By flashing this software, you agree to my assumption that you know what you are doing, and how to recover from one of those oops moments that happen to the best of us.
Whats New
-Rebuilt from a new base
-Glitch Kernel v14 B3 captivatemtd
-Changed out some apps and most of the framework
-Removed the Inverted Market, and you can now purchase apps
-Added the ChromeBookmarksSyncAdapter.apk
Whats Included
-ICS 4.0.3 IML74K firmware, deodexed and rooted with Superuser and Busybox installed
-[Kernel] Glitch Kernel v14 B3 captivatemtd
-AOKP RomControl - Romanbb does it again, superb app for customizing the rom and the framework to support it. Sometimes this guy is still my hero! (anyone get that reference?)
-Tweaked framework and SysUI
-Inverted Apps: Calendar, Gmail, MMS, Music, People, Phone, and Youtube
-Stock Launcher
Known Issues
-Autobrightness is buggy at best.
-On the power menu reboot selection, you have to press, recovery, bootloader, then reboot in order to reboot normally, otherwise it goes straight to recovery when pressing reboot.
-I experience the mute/unmute bug, but my callers say its not as bad, although toggling mute makes it sound clearer.
-Wifi tethering may or may not work.
Tell me what else you find
What Works
-Mostly everything else that's bundled
Install Instructions
You MUST wipe, fully. If you have a problem and you didn't wipe, I'm calling your mama, who is going to come out and wipe for you in front of everybody, embarassing you in front of all your friends and ruining your life forever. So please, save yourself the hassle and humiliation, and just wipe. I will never, ever, edever, put out a no wipe update. Thank you.
Gingerbread bootloaders are recommended!!!
If coming from a Twiz based Rom - you will have to flash this twice, Wipe as per the steps below, flash the rom, it will reboot in the middle of the flash. Use your buttons to reboot into recovery mode, then wipe and flash again, starting from the first step below. If that still doesn't work, you may need to go to CM7 as an intermediary step between Twiz and ICS.
If coming from another ICS build - you should just be able to flash straight away, if it doesn't work, be sure you wiped. If you have to go back to go forward, let it be so.
Steps
-Download ICZen and place it on your internal sd
-Reboot to Clockwork Recovery
-Perform a wipedata/factory reset
-Go to mounts and storage and format the system partition
-Flash your downloaded ICZ rom file
-From the main menu of recovery, perform a wipedata/factory reset again
-Reboot
-On bootup, give it a few minutes to settle in, reboot and use as normal.
-Enjoy your ICZen!
This rom uses the /datadata partition. You may get a low space message if you tend to load a lot of apps. Try turning your Gmal sync down to a day or two instead of the default, or moving apps to sd.
I recommend the data fix from Team ICSSGS, you can find the link to their site above. It will put your data/data on the 2Gb partition, at the sacrifice of speed. You can now use the intergrated memory controls in the Rom Control to maintain a high level of free memory, I use 100MB, and that definitely kills any lag the data fix may cause.
Download
IceCreamZenwich_Beta2 CAPPY
IceCreamZenwich_Beta5.1.1 CAPPY
ICZ RC 1.1
Credits
Br1cK'd-for the rom
b-eock for teaching me and helping me port
Much love to everyone who had a part in this happening, from Team ICSSGS, to Team hacksung, Team Kang, BHuvan goyal, everyone putting out the individual efforts and contributions to keep the SGS alive and strong. This list will grow along with the one at the top of the page, I'm too tired right now to think anymore.
Alright, this should fix the gps problem that people are having.
GPS FIXER for ICZ
Newest Version of Swype for whoever wants it.
Swype For Ics
Add Ons - Hit Those Thanks Buttons!!
ICZen_rc1.1 Stock (Non-Inverted) Apps
Team ICSSGS's Data Migration Script linked and explained by MP
ICS Transition Animations from Alex9090
WIP Jet Black Framework fro Dougfresh
Boot Animation from Dougfresh
Modded Nova Launcher and Icons from DougFresh
CM9 Camera posted by MP
Icy Black Twitter from Dougfresh
Inverted ICS Keyboard from Dougfresh
ICS Soft Keys from nick1217
Icy Zen Dropbox from Dougfresh
Black and White Framework with additional mods from DougFresh
Stock MMS if the inverted gives you fits
Inverted MMS with Blue Icon AND UA FIX from Alex9090
Amoled Blue Theme posted by Dougfresh
More Inverted Apps from Dougfresh
These are untested on the cappy, but they should work perfectly fine
rc1.1
-Same build as RC1, but with a frosty AOKP build26 base.
-Did away with the GApps package, its really not needed, but replaced it with a zip to restore the stock, non-inverted apps. (Calendar, Contacts, Gmail, MMS, and Youtube)
RC1
-Rebuilt from official aokp.vibrantmtd.build25 base
-Incorportaed fixes and mods from the Beta builds
-Fixed Camrea FC and FFC support
-Fixed MMS UA (thanks Alex9090)
-Added custom GApps package
Beta5.1.1
-Fixed Wifi Hotspot (Thanks MP)
Beta 5.1
-Fixed the phone.apk
Beta5 - 2/22/12
-Rebuilt around AOKP build25 (without the unicorn porn, sorry Romanbb)
-Changed camera.aries.so to hopefully support FFC (I don't have one, can't test)
Beta4 - 2/21/12
-Arrrgh!! Rebuilt again, but the lag is gone.
-Fixed the camera, replaced with camera from CM9-16B (thanks for the tip MP)
-Brought back DSPManager with a different build of the app
Beta3.1 - 2/20/12
-Removed DSPManager, believe it to be causing lag
Beta3 - 2/20/12
-Rebuilt from a new base, again.
-Updated Platypus kernel from PaulForde, with fixed ramdisk for GPS
-GPS Works!
-Framework changes, removing GB leftovers with images sourced from Dougfresh, and some more UI tweaks
-Changed the Gallery
-Added the Picasa sync adapter.
-Added IO File Manager
-Added GenieWidget
Downloading. Will report back soon
Sent from my SGH-I897 using xda premium
I really like rom. There are lots of wicked features. But
Sync doesn't work. For some reason I'm connected to 3g/h and when I try to sync it says cannot.establish a connection. I also can't browse the web because of this. Ugkg3 on rogers and it always works well with full service.
robertvarley said:
I really like rom. There are lots of wicked features. But
Sync doesn't work. For some reason I'm connected to 3g/h and when I try to sync it says cannot.establish a connection. I also can't browse the web because of this. Ugkg3 on rogers and it always works well with full service.
Click to expand...
Click to collapse
Try flashing a different modem. Is the ugkg3 a cm7/cm9/miui modem?
So what's the difference of this rom compared to Turks??? Only difference I see is boot animation
Sent from my SGH-I897 using XDA App
jayRokk said:
So what's the difference of this rom compared to Turks??? Only difference I see is boot animation
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
what rom are you referring to?
suprstar29 said:
what rom are you referring to?
Click to expand...
Click to collapse
AOKP build 23... what's the difference?? Everything seems exactly the same but boot animation
Sent from my SGH-I897 using XDA App
jayRokk said:
AOKP build 23... what's the difference?? Everything seems exactly the same but boot animation
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
If you would read, you would notice that he credits AOKP, which is a port from a nexus rom, and he said that he used the framework and the rom control from AOKP. Also, the are inverted apps and if you noticed, all of the ports are very similar, with the exception of slim
suprstar29 said:
If you would read, you would notice that he credits AOKP, which is a port from a nexus rom, and he said that he used the framework and the rom control from AOKP. Also, the are inverted apps and if you noticed, all of the ports are very similar, with the exception of slim
Click to expand...
Click to collapse
Not trying to offend you or anyone but they all seem the same lol
A different launcher or different framework... that's all ....I appreciate the work and everything
Sent from my SGH-I897 using XDA App
GPS not working. and i don't mean it is not working well. it just does not work at all. not even blinking, not even trying. GPS test doesn't show a single sat. as if the phone has no gps.
jayRokk said:
Not trying to offend you or anyone but they all seem the same lol
A different launcher or different framework... that's all ....I appreciate the work and everything
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
Ya, i know what you mean man. CM9 and ICSSGS and Fusion are really the only developed roms for cappy. All the others are ports over that really come from nexus s. I would just try them all out and find what one works best for you
ronkoni said:
GPS not working. and i don't mean it is not working well. it just does not work at all. not even blinking, not even trying. GPS test doesn't show a single sat. as if the phone has no gps.
Click to expand...
Click to collapse
Thats weird. I got a lock in 15 seconds with 20 meters accuracy. Try this http://forum.xda-developers.com/showthread.php?t=1493695 let me know if it works and i will put it in the op
suprstar29 said:
Thats weird. I got a lock in 15 seconds with 20 meters accuracy. Try this http://forum.xda-developers.com/showthread.php?t=1493695 let me know if it works and i will put it in the op
Click to expand...
Click to collapse
Actually, this was the first thing i tried... didn't help.
Then reflashed the rom, still didn't work.
Flashed another ics rom (AOKP) to make sure gps works and it did. Reflash this rom again and no gps still.
No idea whats wrong. My phone just doesnt like ics i guess. Still havent found a rom stable enough to use daily on my phone.
ronkoni said:
Actually, this was the first thing i tried... didn't help.
Then reflashed the rom, still didn't work.
Flashed another ics rom (AOKP) to make sure gps works and it did. Reflash this rom again and no gps still.
No idea whats wrong. My phone just doesnt like ics i guess. Still havent found a rom stable enough to use daily on my phone.
Click to expand...
Click to collapse
Don't worry its not just your phone. I had NO GPS signal on this rom either and I tried EVERYTHING.
Sent from my SGH-I897 using xda premium
wickedninjalo said:
Don't worry its not just your phone. I had NO GPS signal on this rom either and I tried EVERYTHING.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Ok, i will look into it and see what i can do
To clear something...
Firstly ım writing this for only because ı think there is a needed information that anybody dont knows gps abaut this rom...And please dont reply this post...
Firstly SGS Family devices( i9000,cappy,vibrant...) in fact has same devices but has some minor changes too... For that reason you can simply port between these devices...
If we talk abaut this rom then this rom has AOKP base but originally its a vibrant rom. And vibrant gps hardware is not same to cappy and vibrant roms has different gps settings... You can see AOKP works gps but this rom not... because this reason...
So ı can say there is % 0 possibility for working gps on Cappy now.(Needs a gps fix not a simple changing gps.conf file)
I sure hope the GPS can be fixed since this is the only ics rom i tried so far that can run on my cappy without it shutting down.
ronkoni said:
I sure hope the GPS can be fixed since this is the only ics rom i tried so far that can run on my cappy without it shutting down.
Click to expand...
Click to collapse
I made flashable gps fixer... I hope it works... I made it sleepy head and dont look inside rom... ıf not works maybe rom has a difference to look on it...
flash attached gps fixer...
MONFRO AOSP
This is a pure AOSP rom: it has no extra features so it can be snappy and smooth at maximum level.
Indeed the goal of this rom is to be as fast as possible.
- CM10 partition layout (422mb for data)
- Devil Kernel 1.4.1 VC (new kernels with new CM vsync available as addon)
- Devil Kernel Config included (and a init.d script generated with this program, to have everything set up stable at the beginning. If you set bigmem, before reboot remember to set 480 in videocamera settings, otherwise camera app will crash with bigmem). I suggest to install also NSTools, to have more overclocking and BLN options.
- GAPPS (updated to latest) are included
- I SUGGEST A FULL WIPE BEFORE INSTALLING THIS ROM, because added features from CM10, Helly Bean, AOKP and other roms can conflict with pure AOSP settings and functions
DOWNLOAD MONFRO AOSP 23.09.2012 FROM HERE
MD5: 086981af9bd829a742d2d34dd3652b81
- BATTERY MODS
- Battery % Mod CM style
- Battery % Mod Perka Newborn
- Battery Mod restore original icon
- MODS
- Devil Kernel 1.5.2 + new CM vsync
- Semaphore Kernel 2.1.2 + new CM vsync
- MODEMS/RADIO
Here you can find a lot of compatible modems/radio
- THEMES
- MonfroWhite by sephhi
@ALL: feel free to post mods and themes. I will add them to the 1st post
Reserved.
It took me a lot to upload this rom.
It was ready and working perfectly on 21.09.2012...all today i was out and i could upload it only now.
Monfro said:
Reserved.
It took me a lot to upload this rom.
It was ready and working perfectly on 21.09.2012...all today i was out and i could upload it only now.
Click to expand...
Click to collapse
will give it a try.....thank you!
Great work! Appreciate the effort for another AOSP
Looks like I've got another ROM to try out... it will have to be tomorrow though...
Sent from my SGH-I897 using XDA
LOVE the toggle customization. Little laggy on first running overall but so far so good.
It's official, I'm in love! Soft keyboard type option in messages so I can "Enter for new line" and not have that dumbass key!!! THANK YOU
AceofSpades90 said:
Great work! Appreciate the effort for another AOSP
Click to expand...
Click to collapse
I have to say thank you, because your Lanight rom showed me how fast AOSP roms are, as you can see from my enthusiastic comment of 20.09.2012.
But on Lanight 4.0 there were some glitches, for this reason i decided to work on an AOSP rom. I see that you worked to fix Lanight while i was working here: if i would have seen your new rom build, probably i wouldn't have worked on my AOSP.
joe3681 said:
LOVE the toggle customization. Little laggy on first running overall but so far so good.
It's official, I'm in love! Soft keyboard type option in messages so I can "Enter for new line" and not have that dumbass key!!! THANK YOU
Click to expand...
Click to collapse
Message app is from CM: it works better than AOSP one.
AOSP message let you enter messages only of 160 letters, for this reason i decided to substitute it with CM one.
cant get radio working.....
Wifi and signal are not opening. Looked around but didnt see any other radios available? Am i looking in the wrong place? (in this forum) Other than that the rom looks great, but until I can get my wifi working i cant get a full picture of what this rom will be like... I am going to do some more reading. had this problem before, but flashed a radio and everything was good. Now I cant seem to find one. Call me an idiot if you will, just need some direction on where to go from here. The website i used last time has radios for ics but not JB.
Also shell was not given SU permissions. Bad flash maybe?
Thanks in advance....
Poke01 said:
Wifi and signal are not opening. Looked around but didnt see any other radios available? Am i looking in the wrong place? (in this forum) Other than that the rom looks great, but until I can get my wifi working i cant get a full picture of what this rom will be like... I am going to do some more reading. had this problem before, but flashed a radio and everything was good. Now I cant seem to find one. Call me an idiot if you will, just need some direction on where to go from here. The website i used last time has radios for ics but not JB.
Also shell was not given SU permissions. Bad flash maybe?
Thanks in advance....
Click to expand...
Click to collapse
Here you can find a lot of compatible modems/radio, find the one that works best in your area:
http://soggycashew.weebly.com/cm7miui--ics-modems.html
If you have problems with SuperUser, try SuperSU from Play Store.
Updated first post with modems/radio link and battery % mods.
@ALL: feel free to post mods and themes. I will add them to the 1st post
Added mods to flash latest Devil and Semaphore kernels + new CM vsync
Your cappy looks promising because you are a recognized Dev. seems your also using same partition layout as of hellybeans that why can't flash this cappy on my captivate as I'm using broken sd device.
Sent from my SGH-I897 using XDA
s0ul_ali said:
Your cappy looks promising because you are a recognized Dev. seems your also using same partition layout as of hellybeans that why can't flash this cappy on my captivate as I'm using broken sd device.
Sent from my SGH-I897 using XDA
Click to expand...
Click to collapse
This rom uses the same layout as CM10: 422mb on fastest nand for data and the rest (slow nand) for system.
I am sorry you can't try this rom. I have read here and there about people with broken internal SD but i didn't entered in details.
another AOSP rom to test...nice......will test it soon.....
Monfro said:
Here you can find a lot of compatible modems/radio, find the one that works best in your area:
http://soggycashew.weebly.com/cm7miui--ics-modems.html
If you have problems with SuperUser, try SuperSU from Play Store.
Updated first post with modems/radio link and battery % mods.
@ALL: feel free to post mods and themes. I will add them to the 1st post
Click to expand...
Click to collapse
I've been on xda long enough, but I'm drawing a blank at the moment. If my WiFi isn't turning on, would changing the modem affect that?
My Captivate has been relegated to my backup device, almost always used on WiFi.
From what I've played with on this rom, I like it a lot. Keep up the great work!
I have had similar issues with other JB AOSP roms with CM10 base. If I understand it correctly, it is due to the datadata partition that is included with this base (data partition table messes up the Kernel or something). To my knowledge there is no work around for this. Some of the AOSP roms here (LANIGHT for example) have a nodatadata version which solves the problem.
Hope this helps!
Poke01 said:
Wifi and signal are not opening. Looked around but didnt see any other radios available? Am i looking in the wrong place? (in this forum) Other than that the rom looks great, but until I can get my wifi working i cant get a full picture of what this rom will be like... I am going to do some more reading. had this problem before, but flashed a radio and everything was good. Now I cant seem to find one. Call me an idiot if you will, just need some direction on where to go from here. The website i used last time has radios for ics but not JB.
Also shell was not given SU permissions. Bad flash maybe?
Thanks in advance....
Click to expand...
Click to collapse
Sagui said:
I have had similar issues with other JB AOSP roms with CM10 base. If I understand it correctly, it is due to the datadata partition that is included with this base (data partition table messes up the Kernel or something). To my knowledge there is no work around for this. Some of the AOSP roms here (LANIGHT for example) have a nodatadata version which solves the problem.
Hope this helps!
Click to expand...
Click to collapse
To enable wifi try these 2 methods:
1. turn on Bluetooth, reboot, activate wifi and now it works.
2. activate wifi, turn on Bluetooth, reboot and now wifi works
Sent from my Captivate
Monfro said:
To enable wifi try these 2 methods:
1. turn on Bluetooth, reboot, activate wifi and now it works.
2. activate wifi, turn on Bluetooth, reboot and now wifi works
Sent from my Captivate
Click to expand...
Click to collapse
Method 1 worked for me....Awesome! Thanks!
tried downloading the file and my antivirus went crazy lol .....
Zero4 said:
Method 1 worked for me....Awesome! Thanks!
Click to expand...
Click to collapse
So the problem comes from the Bluetooth kill function in devil kernel, which kills also wifi.
I suggest to disable devil idle and deep idle and to leave "enable Bluetooth " in devil kernel config app.
MrSwiss876 said:
tried downloading the file and my antivirus went crazy lol .....
Click to expand...
Click to collapse
It is because of superuser, but there are no viruses inside the zip.
Sent from my Captivate
Flashing!! :fingers-crossed:
Hey Monfro, how is going the battery life so far ?
CAN ANYBODY PORT JELLY BEAN MIUI FOR MOTOROLA BRAVO??? DEFY already has miui JB,here is the link:http://forum.xda-developers.com/showthread.php?t=1161110
hiandro said:
CAN ANYBODY PORT JELLY BEAN MIUI FOR MOTOROLA BRAVO??? DEFY already has miui JB,here is the link:http://forum.xda-developers.com/showthread.php?t=1161110
Click to expand...
Click to collapse
I could, but it would be a couple of days at least before I could even try. I'm busy making stock roms for the Atrix HD from its fastboots and converting the Xperia Z XXHDPI icons to XHDPI for a rom I'm working on. Might have to test an Atrix HD Miui as well . Once I'm done with that crap I'll give it a shot.
To do it yourself, use a PC a zip manager, and text editor -- 7-Zip & Notepad ++ for Windows, File Roller & Gedit on Linux, Whatever's appropriate on a Mac~
The apps I recommend are the one that I use for doing this and know work properly for what we're doing. DO NOT USE STOCK NOTEPAD OR WORDPAD ON WINDOWS -- YOU'VE BEEN WARNED.
Use Latest Quarx CM10 for Bravo and Latest Defy MIUI
Open Defy Miui
Delete libbayercamera.so, liboemcamera.so, libsoccamera.so
Take any think that says libcamera from Bravo CM10 from /system/lib and put them in Defy Miui zip (libcamera_client.so, libcameraservices.so, libkobecamera.so)#
Go to /system/lib/hw in Defy Miui
Rename any file with jordan to kobe** (gps.jordan.so to gps.kobe.so, camera.jordan.so to camera.kobe.so -- same for the rest)
Open Miui build.prop
Search and Replace works good for this part (CTRL+H with Linux's Gedit)
Replace any jordan with kobe**
Replace any 525\526 with 520*
Replace any Defy with Bravo*
Go to the bottom, set camera to ClassA, 3m, & delete the 2 flash lines
Save build.prop
Go to /system/etc in Defy Miui
Replace mot_ise_imager_cfg.bin
Replace media_profiles.xml
Delete the Defy camera cal files
IF the Miui rom is custom kernel
Go to /system/bootmenu/ in Miui Defy and delete everything. Add in /system/bootmenu from Quarx Bravo CM10%$
Go to /system/lib/modules in Miui Defy and delete everything, replace with Bravo CM10.%
Click to expand...
Click to collapse
The only other thing that might need to be done is replacing Miui's /system/lib/libandroid_runtime.so. If it boots and runs you don't have to. If it loops, replace it.
* These can be skipped if you don't mind being branded as a Defy
** These two are mutually exclusive, whatever the value is in build.prop is what the gps.propvalue.so should be in /system/lib/hw -- you'll bootloop if they're different
# Can be skipped if you don't take pictures or would like to use the Defy's libsoccamera.so to take 16:9 848x480 widescreen videos. Its one or the other -- Defy driver with no photo camera but better\widescreen videos or Bravo driver with photo camera but only 4:3 aspect videos.
$ This is to use the Bravo's kernel and ramdisk, if Miui is stock kernel based, ignore this step
% Custom Kernel roms only
~ I've only ran a Mac for 30 minutes, OS 7 or 8, and all I did was make it cuss and say dumb things with the text to speech option. I couldn't wrap my head around a mouse with only 1 clicker :silly:
Funny, the above reads really similar to how you port basically any Defy rom to the Bravo ICS+ and I know I've posted that tutorial before. These same instructions work for GB roms as well, just slightly modify accordingly.
thanks man!!
skeevy420 said:
I could, but it would be a couple of days at least before I could even try. I'm busy making stock roms for the Atrix HD from its fastboots and converting the Xperia Z XXHDPI icons to XHDPI for a rom I'm working on. Might have to test an Atrix HD Miui as well . Once I'm done with that crap I'll give it a shot.
To do it yourself, use a PC a zip manager, and text editor -- 7-Zip & Notepad ++ for Windows, File Roller & Gedit on Linux, Whatever's appropriate on a Mac~
The apps I recommend are the one that I use for doing this and know work properly for what we're doing. DO NOT USE STOCK NOTEPAD OR WORDPAD ON WINDOWS -- YOU'VE BEEN WARNED.
Use Latest Quarx CM10 for Bravo and Latest Defy MIUI
The only other thing that might need to be done is replacing Miui's /system/lib/libandroid_runtime.so. If it boots and runs you don't have to. If it loops, replace it.
* These can be skipped if you don't mind being branded as a Defy
** These two are mutually exclusive, whatever the value is in build.prop is what the gps.propvalue.so should be in /system/lib/hw -- you'll bootloop if they're different
# Can be skipped if you don't take pictures or would like to use the Defy's libsoccamera.so to take 16:9 848x480 widescreen videos. Its one or the other -- Defy driver with no photo camera but better\widescreen videos or Bravo driver with photo camera but only 4:3 aspect videos.
$ This is to use the Bravo's kernel and ramdisk, if Miui is stock kernel based, ignore this step
% Custom Kernel roms only
~ I've only ran a Mac for 30 minutes, OS 7 or 8, and all I did was make it cuss and say dumb things with the text to speech option. I couldn't wrap my head around a mouse with only 1 clicker :silly:
Funny, the above reads really similar to how you port basically any Defy rom to the Bravo ICS+ and I know I've posted that tutorial before. These same instructions work for GB roms as well, just slightly modify accordingly.
Click to expand...
Click to collapse
I've been thinking to dive into developer's world ,you know.and i think this will be great stuff to start with..,THANKS A LOT skeevy420, i will certainly start working now.
I see, you are enjoying your new Atrix HD. good for you man and also i hope you will not leave bravo development(we need you)http://forum.xda-developers.com/ima...um.xda-developers.com/images/icons/icon10.gif
hiandro said:
I've been thinking to dive into developer's world ,you know.and i think this will be great stuff to start with..,THANKS A LOT skeevy420, i will certainly start working now.
I see, you are enjoying your new Atrix HD. good for you man and also i hope you will not leave bravo development(we need you)http://forum.xda-developers.com/ima...um.xda-developers.com/images/icons/icon10.gif
Click to expand...
Click to collapse
I'm not. I just have to play with my new toy for a bit.
Good luck with that. I'll help you test if you get it going.
I have my hands full trying to get any Atrix HD ICS rom to work with the AT&T JB kernel. Best I've done so far is getting the Canadian Bell ICS to finish gapps setup and get to the homescreen. Bootloops about a minute after that and I'll get maybe 30 seconds of screen time -- stressing maybe cause it only happened 3 out of 8 tries.. Can't get a logcat or even have the phone recognized over usb. Getting it to a partially working system, even if only for a minute, lets me know that it could possibly fully work.
Highly unstable
skeevy420 said:
I'm not. I just have to play with my new toy for a bit.
Good luck with that. I'll help you test if you get it going.
I have my hands full trying to get any Atrix HD ICS rom to work with the AT&T JB kernel. Best I've done so far is getting the Canadian Bell ICS to finish gapps setup and get to the homescreen. Bootloops about a minute after that and I'll get maybe 30 seconds of screen time -- stressing maybe cause it only happened 3 out of 8 tries.. Can't get a logcat or even have the phone recognized over usb. Getting it to a partially working system, even if only for a minute, lets me know that it could possibly fully work.
Click to expand...
Click to collapse
I did whatever you said and camera,WiFi worked well.But whenever I try to create Google account the device just reboots.It is highly unstable,only about 80 MB ram is free(slow),also music player also showed same problem as Google account did,
How can I make it stable,any idea???
If you can, upload what you're working on and I'll try it out. That'll be easier than asking for logcats and giving you ideas to try.
What gapps did you use? I always use the Defy Minimal gapps.
ok
skeevy420 said:
If you can, upload what you're working on and I'll try it out. That'll be easier than asking for logcats and giving you ideas to try.
What gapps did you use? I always use the Defy Minimal gapps.
Click to expand...
Click to collapse
i didnt use any gapps, i thought miui already had gapps by default.i just changed build.props and others that you told in earlier post.
where can i upload the zip so that you can download????
hiandro said:
i didnt use any gapps, i thought miui already had gapps by default.i just changed build.props and others that you told in earlier post.
where can i upload the zip so that you can download????
Click to expand...
Click to collapse
Gapps depends on the rom -- some come with them, some don't.
You can upload to anywhere -- Mediafire, Google Drive, Dropbox, whatever's convenient for you.
hiandro said:
CAN ANYBODY PORT JELLY BEAN MIUI FOR MOTOROLA BRAVO??? DEFY already has miui JB,here is the link:http://forum.xda-developers.com/showthread.php?t=1161110
Click to expand...
Click to collapse
a chinese guy is working on it , and he said its coming soon,
http://bbs.gfan.com/forum.php?mod=viewthread&tid=6022223&extra=page=1
this is the preview, sorry for my bad english
banyelaiwande said:
a chinese guy is working on it , and he said its coming soon,
http://bbs.gfan.com/forum.php?mod=viewthread&tid=6022223&extra=page=1
this is the preview, sorry for my bad english
Click to expand...
Click to collapse
looks nice and clean,
ok man ,you have to keep on eye on that and share the link when he's done.
is up
hiandro said:
looks nice and clean,
ok man ,you have to keep on eye on that and share the link when he's done.
Click to expand...
Click to collapse
The rom is alredy posted in the first post of the trhead in the link i am downloading right now but i dont think i will try it today i am hapy with the 4.2.2 http://forum.xda-developers.com/images/smilies/biggrin.gif
everal1810 said:
The rom is alredy posted in the first post of the trhead in the link i am downloading right now but i dont think i will try it today i am hapy with the 4.2.2 http://forum.xda-developers.com/images/smilies/biggrin.gif
Click to expand...
Click to collapse
Is 4.2.2 available for bravo?,give me the link please...
here
hiandro said:
Is 4.2.2 available for bravo?,give me the link please...
Click to expand...
Click to collapse
just search in the 4.1.1 thread in motorola bravo development some times for know when there are a new update
in the first page of the 4.1.1 thread you can search for the quarks build and in the server just search for 10.1 bavo sorry i cant post links xD
skeevydude said:
I could, but it would be a couple of days at least before I could even try. I'm busy making stock roms for the Atrix HD from its fastboots and converting the Xperia Z XXHDPI icons to XHDPI for a rom I'm working on. Might have to test an Atrix HD Miui as well . Once I'm done with that crap I'll give it a shot.
To do it yourself, use a PC a zip manager, and text editor -- 7-Zip & Notepad ++ for Windows, File Roller & Gedit on Linux, Whatever's appropriate on a Mac~
The apps I recommend are the one that I use for doing this and know work properly for what we're doing. DO NOT USE STOCK NOTEPAD OR WORDPAD ON WINDOWS -- YOU'VE BEEN WARNED.
Use Latest Quarx CM10 for Bravo and Latest Defy MIUI
The only other thing that might need to be done is replacing Miui's /system/lib/libandroid_runtime.so. If it boots and runs you don't have to. If it loops, replace it.
* These can be skipped if you don't mind being branded as a Defy
** These two are mutually exclusive, whatever the value is in build.prop is what the gps.propvalue.so should be in /system/lib/hw -- you'll bootloop if they're different
# Can be skipped if you don't take pictures or would like to use the Defy's libsoccamera.so to take 16:9 848x480 widescreen videos. Its one or the other -- Defy driver with no photo camera but better\widescreen videos or Bravo driver with photo camera but only 4:3 aspect videos.
$ This is to use the Bravo's kernel and ramdisk, if Miui is stock kernel based, ignore this step
% Custom Kernel roms only
~ I've only ran a Mac for 30 minutes, OS 7 or 8, and all I did was make it cuss and say dumb things with the text to speech option. I couldn't wrap my head around a mouse with only 1 clicker :silly:
Funny, the above reads really similar to how you port basically any Defy rom to the Bravo ICS+ and I know I've posted that tutorial before. These same instructions work for GB roms as well, just slightly modify accordingly.
Click to expand...
Click to collapse
I did!
WIUI Defy v4 + cm-10-20130507-NIGHTLY-mb520 from Quarx
i made MIUI Motorola Bravo port, thanks for your help.
here is file for test on your bravo:
https://www.dropbox.com/s/s84tvlh8dxqn7cx/WIUI_v4_JB_Bravo_3_1_21.zip