Related
Hello.
And bacon and spam:
I've recently upgraded my SGS to ICS (ICSSGS ROM) and started to develop a simple application.
So, now i've got to the point that the emulator starts to show its limitations, so i need to debug directly on the real device.
Well, i've been trying to make ADB recognize my phone, tried several usb drivers from several sites, none of them worked.
After several hours spanking windows, it's finally working (yes! almost 6 AM in the morning!).
What matters:
So, to anybody who have the same problem as i had, do the following:
0. Uninstall any drivers that you've tried before.
1. Extract the zip file that i've uploaded to anywhere you like.
2. Enable debugging on your phone and connect it to PC throught the USB cable
(Just connect it, don't mount)
3. On your computer, click Start -> Right click on "Computer" -> Manage
This will open the "Computer Management" window (it might take some seconds to load).
4. Click "Device Manager". Now you should find your device in the list. It must be really easy to find. It's called something like "GT-I9000" or "GalaxyS" and it has a yellow warning sign next to it.
5. Right click on it and choose "Update Driver Software". In the window that appears, choose "Browse my computer for driver software". It then asks you where is the driver.
6. Click the "Browse" button and choose the folder you extracted from my zip file.
(If you didn't change it, it must be called "Android Composite ADB Interface")
7. Click "Next" and cross your fingers. If you're lucky, it may work for you.
Final notes:
1. I'm not responsible for ANYTHING. Whatever you do, it's your own choise to do it. I guarantee absolutely nothing.
2. This is was tested on Windows 7 - 64 bits with Team ICSSGS RC4.2 ROM and Semaphore ICS 0.9.1 Kernel.
3. Have fun.
4. If you try this, please answer the topic and tell everybody if it's working for you (mentioning your Windows version and what ROM you use).
Driver file:
-> http://www.mediafire.com/?t8ekrd9ly3mwwbk
Missing file when installing driver on windows 7 x64
Hi,
I have recently installed the most recent Dark Knight ICS 4.0.4 build to my Samsung Galaxy S. The ROM seems very good but I'm an android app developer and need to be able to debug my applications on the device via USB.
I have tried the driver provided in the thread which won't install due to a missing file according to the Windows 7 x64 driver install wizard. The exact message is displayed after step 7 and says:
"Windows found driver software for your device but encountered an error while attempting to install it."
"Android Composite ADB interface"
"The system cannot find the file specified".
Is there a file missing in the package? Has anybody managed to get this driver working?
Cheers,
Ben
Does it say that it doesn't find a controller or that is there a missing file?
Anyway, please try this installer and let me know if it works for you:
http://www.mediafire.com/?v70501cxbzzdvc2
What's wrong with the Nexus S drivers available with Android SDK?
Google USB driver, R4 developer.android.com/sdk/win-usb.html
The SGS will present it self like that when it is running ICS/CM7/CM9.
Sent from my GT-I9000
METEMEDO said:
Does it say that it doesn't find a controller or that is there a missing file?
Anyway, please try this installer and let me know if it works for you:
http://www.mediafire.com/?v70501cxbzzdvc2
Click to expand...
Click to collapse
Dont work for me.
System: Windows 7 x64
Android 4.04 Dark Knight
Nevertheless thanks for your approach. I'll test if it works with the SDK Updater.
I'm going to test in my desktop this weekend to check if it works with it.
I have the same problem, but with WIndows 7 32 bit. Drivers from discusion doesn't work. Don't you have some for 32 bit?
I found SDK Components on developer.android.com, where is Android driver which suppose to work, but unfortunately ODIN still do not see phone.
I also have the same problem but mine is worse because my phone is completely down after I tried to restore from a GB ndriod backup failure , phone won't boot , cannot boot into recovery only in download mode but no way my 4 x computers would detect the phone now ....tried using heimdall in linux as well as sdb, no go....so sad...help...
Sent from my Dell Streak using XDA
Using Google USB drivers finally worked for me. They can be optionally installed with Android SDK using SDK manager (extras). After installation drivers can be found in <sdk>\extras\google\usb_driver.
Just follow the instructions in the first post to find your device from device manager with exclamation mark. Need at least one reboot to work and I also redirected the driver installation process to Google usb driver directory but now ADB finally recognizes my SGS (MyICS, Android 4.0.3).
Edit: Operating system Vista 64-bit
[Currently stuck in "error: device not found" while trying adb push -command. I will update if I find a workaround. Probably something to do with inf-file.]
For alternate .inf -file (optional):
Google "usb-drivers-not-working-after-flash-latest-rom-ota" and see post #12 to see alternative inf-file. Some have managed to make adb recognize the device with that file, but I have at least this far been unsuccessful.
Edit: Problem above was caused by me being stupid and trying to use push in shell, which caused phone unable to locate host system folders. I don't know if that inf file has anything to do with drivers working now, but go ahead and try it if doesn't work with the original .inf
I got my i9000 recognized using the latest drives from the Google sdk
That‘s great
http://ics.samsung-updates.com/addons/usb_driver.zip
oxidising said:
I got my i9000 recognized using the latest drives from the Google sdk
Click to expand...
Click to collapse
I tried last night didn't work for me.... (r18)
Sent from my Dell Streak using XDA
oxidising said:
I got my i9000 recognized using the latest drives from the Google sdk
Click to expand...
Click to collapse
Daha açık anlatabilir misiniz?
IWillExplain said:
http://ics.samsung-updates.com/addons/usb_driver.zip
Click to expand...
Click to collapse
... this driver actually worked for me...!
(Tiramisu ICS)
USB option has been lost in my galaxy s
RazorNova said:
Using Google USB drivers finally worked for me. They can be optionally installed with Android SDK using SDK manager (extras). After installation drivers can be found in <sdk>\extras\google\usb_driver.
Just follow the instructions in the first post to find your device from device manager with exclamation mark. Need at least one reboot to work and I also redirected the driver installation process to Google usb driver directory but now ADB finally recognizes my SGS (MyICS, Android 4.0.3).
Edit: Operating system Vista 64-bit
[Currently stuck in "error: device not found" while trying adb push -command. I will update if I find a workaround. Probably something to do with inf-file.]
For alternate .inf -file (optional):
Google "usb-drivers-not-working-after-flash-latest-rom-ota" and see post #12 to see alternative inf-file. Some have managed to make adb recognize the device with that file, but I have at least this far been unsuccessful.
Edit: Problem above was caused by me being stupid and trying to use push in shell, which caused phone unable to locate host system folders. I don't know if that inf file has anything to do with drivers working now, but go ahead and try it if doesn't work with the original .inf
Click to expand...
Click to collapse
What should i do after instaling SDK
IWillExplain said:
http://ics.samsung-updates.com/addons/usb_driver.zip
Click to expand...
Click to collapse
This worked for me
The very important thing is that newest Google USB driver is in
Code:
[B]<android-sdk>/extras/google/usb_driver/[/B]
location, not in
Code:
<android-sdk>/usb_driver
It really makes the difference !
these drivers only worked once...
all the other times killing and starting over adb i was getting error messages like "device not found" and "protocol fault" even though adb devices was listing the device online.
apparently i connected the phone to another USB3 port on my pc (front panel) and that was it!! it now works every time i type adb shell or adb devices.i no longer get any error messages.rather weird
anyway..i also wanted to be up to date with everything so i uninstalled all related software like the older java 6 jdk, Android SDK and the drivers mentioned above.
i followed the procedure below and installed all the latest packages:
latest java 7u5 JDK, the latest Android SDK (nstaller_r20.0.1-windows.exe) then ran sdk-manager and loaded http://developer.android.com/tools/extras/oem-usb.html#InstallingDriver google USB drivers rev 6. then installed these drives so i got the ADB composite interface on my device manager and it all works fine now.
I recenelty installed latest ICS , and SDK recognizes my phone as ACER ADB , when I'm pretty sure its a Samsung I9000 . I tried uninstalling the ACER ADB and install the one that the guy posted in the first post , and it didn't work , it said this driver is not compatible , oddly it reinstalled ACER ADB though. I can't even uninstall it at all , I removed all my Samsung drivers , and everything else I installed for Samsung , and its still there , I even tried removing the GOOGLE USB drivers , still there.
Neendless to say that the phone doesnt connect to the PC at all even though it says everything is alright. For example i got ths gPAD app , which uses the USB with Debugging to turn the phone into a mouse , but it says its not connected even though it is.
Mod Message: OP's link is down. Please search the comments to find other's mirror. But please remember to use AV software to scan before you proceed to install, in case of malware or virus!
Instructions to installing HTC Drivers on Windows8 64Bit:
==========================================
1. Download the Windows7 (64 Bit) drivers here - R[COLOR="Red"]emoved[/COLOR]
2. Unzip to any location you want. Just remember where you put them.
3. Plug in your phone to your USB cable.
4. Open your Device Manager (Windows Key + X and select Device manager) and locate HTC under Other Devices and right click on it and select Update Driver Software
5. Select "Browse my computer for driver software"
6. Click Browse and then select the folder you unzipped with the drivers in it then click next.
7. It should now install your drivers and then in your device manager it will now show up "My HTC" under Android USB Devices.
Hope that helps anyone having troubles getting USB/HTC drivers working on Windows 8 (64bit).
*NOTE* I'm not sure if this will be the same for you guys but I had to plug my phone into USB slot 2. USB slot 3 would not work.
Just a little heads up
All credit for this guide goes to Hippie459MN for the original thread. Be sure to thank him for his work
I'm just posting it in this forum because it works fine and a lot of people aren't aware of this method
Awesome man. Don't even have my One but if I have problem with Windows 8, it's great that you already posted a solution.
Sent from my iPhone using Tapatalk 2
It took me quite a while of searching to actually find that guide but I'm glad I did otherwise I couldn't have unlocked my bootloader or rooted
Been trying to get the driver to work on my W8 laptop for my E3D. This worked for it after spending hours trying all sorts. Thanks a million. I will be sure to go through to the other thread and say thanks too.
If only I saw this before I spent hours last night trying to get adb to recognise my phone. I somehow got there in the end but this would've saved me a good two hours!
Sent from my HTC One using xda premium
Yeah, that's the guide I used a couple of weeks ago. Think I might have posted it in the rooting tutorial thread....would have been lost without it.
Sent from my HTC One using Tapatalk 2
cynogenmod jbean cm-10.1-20130411-EXPERIMENTAL-endeavoru-M3
I just lost connection to lappy after installing this rom...though device is getting recognized it wont let me update driver using guide can you help plz
:crying:
Bumping up
installed the drivers as instructed below but with win8 / 64-bit i can't get the one to mount the sdcard.
seems to work just fine on my win7 machine. any help with this?
trant01 said:
installed the drivers as instructed below but with win8 / 64-bit i can't get the one to mount the sdcard.
seems to work just fine on my win7 machine. any help with this?
Click to expand...
Click to collapse
it should show up as an MTP device when you plug it in
cachookaman said:
it should show up as an MTP device when you plug it in
Click to expand...
Click to collapse
i can't install a driver for the MTP device. should it be in that zip? i'm trying to get it to install from that directory and it says it can't find a driver for it....
Tried this technique and it still won't work.
Here's what I'm doing
- Uninstall all current drivers & HTC Sync
- Restart PC
- Your method exactly
- Restart PC
Phone when on normally connects to adb just fine,
but when I put it into the bootloader it takes around 15 seconds to detect it and then says it's unrecognised and gives the error below:
Device doesn't start. (Code 10)
A request for the USB BOS descriptor failed.
Any help would be appreciated. For now, I'm running a copy of W7 on an old 2.5" drive... not ideal.
Tried this technique and it still won't work.
@petedavison93 and the owner of this thread, did you guys find a fix to pete's issue as I'm having the same issue as Pete, please help!
Had the same issue and installed different drivers several times without luck.
It was fixed for me by simply plugging in the phone into an USB port at the motherboard. The front USB and additional USB3 ports at the PC were not working, when the device is booted to the bootloader. They are working with adb only, when the phone is running normal.
I am running Win8x64.
Great Instructions
KidCarter93 said:
Instructions to installing HTC Drivers on Windows8 64Bit:
==========================================
1. Download the Windows7 (64 Bit) drivers here - http://d-h.st/23V
2. Unzip to any location you want. Just remember where you put them.
3. Plug in your phone to your USB cable.
4. Open your Device Manager (Windows Key + X and select Device manager) and locate HTC under Other Devices and right click on it and select Update Driver Software
5. Select "Browse my computer for driver software"
6. Click Browse and then select the folder you unzipped with the drivers in it then click next.
7. It should now install your drivers and then in your device manager it will now show up "My HTC" under Android USB Devices.
Hope that helps anyone having troubles getting USB/HTC drivers working on Windows 8 (64bit).
*NOTE* I'm not sure if this will be the same for you guys but I had to plug my phone into USB slot 2. USB slot 3 would not work.
Just a little heads up
All credit for this guide goes to Hippie459MN for the original thread. Be sure to thank him for his work
I'm just posting it in this forum because it works fine and a lot of people aren't aware of this method
Click to expand...
Click to collapse
I have the HTC EVO V 4G (Virgin Mobile) The ONLY difference on my installation of the drivers was under Other Devices, instead of HTC mine was listed as EVO. Worked perfect first try..TY
Great post
Great post and link, this worked straight away and allowed direct connection to Eclipse
Thankz I must try this looking for this
I just install HTC sync, done deal.
Sent from my HTC One using Tapatalk 2
Anyone happen to know where I can find some windows 7 32bit drivers. Windows 8 32bit isn't a fan of 64bit software.
It isn't a problem with the HTC drivers. It's the usb drivers from Ms for Intel 3.0 bus. I found a thread that I'm searching again for that give the instructions on replacing the signed ms driver with an unsigned win 7 64bit host controller driver. It's two files and you need to first allow unsigned drivers in windows security. Needless to say it's fine now on my 3 ports.
Sent from my HTC One using xda premium
Hello,
I'm trying to root my Nexus 7. I'm on windows 7, 32 bit edition. I'm running it in a virtual box virtual machine. I've tried installing the drivers, but neither the ASUS, nor the Android SDK, nor the Google drivers work. Windows Update obviously can't find any. Whenever I try to install the drivers, a screen flashes and disappears really fast, and than it says I already have the most up to date drivers installed, which is not true. I've tried uninstalling the drivers, but that didn't change anything. I've checked the make sure there are not any spaces in the path to the drivers, and I have set the directories to be one level higher than i386. I've even set the directory to just 'Desktop', but while it took a few seconds, it still reported that it had the best driver installed, unknown device. If anyone could help me, it would be much appreciated. This is my first post, so I'm not familiar with the forums, so please tell me I have made any mistakes.
Download nexus 7 toolkit from here.. http://forum.xda-developers.com/showthread.php?t=1809195
And folllow the instructions to install windows driver..
put in a new SSD and got Windows 8.1, did a fresh install on a new hard-drive, everything's been working great, My nexus 4 has worked with with ADB./Fastboot and I've been able to transfer files to and from it in MTP mode. Been like that for about 4 days until about 3 hours ago, I had Windows Explorer crash, had to run Task Manager, end the process, and then manually restart explorer.exe My device was plugged in when this happened, and afterwards, I noticed that I could no longer see my Nexus 4 under the Devices & Drives section of "This Computer" (My Computer had a better ring to it lol) First I tried rebooting both my laptop and my Nexus 4, then I tried uninstalled the drivers, rebooting, re-installing, and then rebooting again. Did that like 4 times now, each time re-downloading the drivers, and doing an MD5 hash to create a Checksum, and checking them each time. Also to no avail. ADB shows my device serial number when i enter : ADB Devices, but says it's unauthorized, so if I try anything like: ADB Reboot Bootloader, it says Device is not authorized.
So ! I don't understand wtf is going on. Was working fine before. The drivers are up to date, I just flashed the Official OTA image, and was on the leaked image prior to that. Then earlier this evening I switched to the newest version of the Nexus 5 Port, and everything was still working fine, hadn't made any changes in a couple hours before this happened. When I install the drivers, It acts like it worked. Instead of saying "NEXUS 4" under Other Devices in my Device Manager, it says Composite ADB Interface under Android Devices and MTP under Portable Devices. Sometimes tho the MTP entry will still show the Yellow Exclamation Point. But goes away. Don't know whats up with that either.
Also, it wont let me install drivers unless I am in MTP mode, which Usually you can install them regardless (tho I never tried in Camera mode, I am just assuming about that one) Usually I install drivers without MTP or Camera modes checked, but now if I try it, it says that Windows Cant find the Drivers, even tho I am obviously browsing for them myself and selecting them. And just now I tried updating instead of re-installing them, and it keeps saying that Windows has determined they are the most up to date.
So I am out of I ideas. I even updated windows media player cause that's what fixed my issue on Day 1 of running Windows 8.1 when it wouldn't recognize it at all. So I don't know. Sorry for the long post but I wanted to make sure I got everything in there so hopefully someone can narrow down what the issue is. Cause I've been at it for 3 hours, haven't slept yet, my Nexus 5 gets here today, and I need to get this fixed before I sell it to my buddy. Its brand new, only 15 days old.*
Any thoughts ?*
First, connect your Nexus 4 and use Device Manager to uninstall both MTP and ADB devices, make sure to check the box to delete the driver files as well. Then uninstall any other usb or adb drivers for other Android devices.
Then disable USB Debugging on the phone and get MTP to work first, Windows should be able to install it automatically.
For ADB, Windows 8 will not allow to install unsigned driver. To install unsigned driver, reboot Windows 8 into Advanced startup and press F7 at the menu to disable driver signature (Google it if you don't know how). Although you could install Google USB driver which is signed I think, I recommend using Universal Naked Driver (link in sig.)
ADB Devices, but says it's unauthorized
Click to expand...
Click to collapse
You need to authorize it from your phone, when you connect your phone to the PC with USB Debugging turned on, a toast message on the phone will ask you to authorize the device.
eksasol said:
First, connect your Nexus 4 and use Device Manager to uninstall both MTP and ADB devices, make sure to check the box to delete the driver files as well. Then uninstall any other usb or adb drivers for other Android devices.
Then disable USB Debugging on the phone and get MTP to work first, Windows should be able to install it automatically.
For ADB, Windows 8 will not allow to install unsigned driver. To install unsigned driver, reboot Windows 8 into Advanced startup and press F7 at the menu to disable driver signature (Google it if you don't know how). Although you could install Google USB driver which is signed I think, I recommend using Universal Naked Driver (link in sig.)
You need to authorize it from your phone, when you connect your phone to the PC with USB Debugging turned on, a toast message on the phone will ask you to authorize the device.
Click to expand...
Click to collapse
ok I am gonna try that now. And as far as the part about my phone being unauthorized. I already knew about the notification that pops up, i was waiting for it to happen. Never did tho. Maybe it will happen after I do the rest of what you said. thanks, i will post my results in a min
no matter what i do, i cant get MTP working. When i uninstall the ADB entry in Device Manager it gives me the check-box option for removing drivers as well, but not on MTP. And now it wont even give me the option to uninstall, update, or anything at all, even tho I uninstalled it already so it should at least give me the option to install drivers. Even tho it's showing up in Device Manager as a Portable device, if I look in Printers and Devices, it shows up as unspecified device. Disabled USB Debugging, and all that. it says its working but it wont show up in My Computer>Devices and Drives still. For some reason ever once in awhile it will pop up with the Yellow Exclamation Point tho, only for a brief second tho. other then that, its shows it like it's running correctly. Also, nothing pops up saying that windows is installing drivers when i plug it in. Which in Win 7, XP, etc, it always did. Does this not happen in Windows 8.1 ?
Also, under Driver Details, which is the only option it lets me click on MTP, it says the drivers are from 2006 lol
Update - Just reinstalled the drivers for ADB and enabled USB Debugging, and everything is still saying its working even tho its not. But when I take my phone out of MTP mode it shows up in device manager under "Other Devices" as Nexus4, with a Yellow Exclamation, and it gives me the option to update drivers, so i tried, but it says Windows Can't find my driver. This is very frustrating.
Had this problem aswell, which was caused by the N version of Windows 8 versions.
These versions dont have Windows Media Player istalled, which is needed for MTP to work.
So to fix your problem you need to download that latest Windows Media Player (WMP) from microsoft and install that.
I dont have the N version, I have WMP installed, i mentioend your fix in the OP. Had to update it, and it worked. It was working fine for the last few days, then it stopped working suddenly
double post, sorry. dont know why that happened.
Vouch. Since I use win8.1 (no n version) Mtp doesnt work. I tried all known drivers, disabled driver signature and so on. The only working combination for me is Usb Debugging + PTP. Then I use file manager to cut the files. Airdroid would be an alternative as well.
update - SOLVED * Kind of.....I say kind of cause I still don't know what caused it but apparently Flashing to the Nexus 5 Port fixed the issue lol. I am assuming something pertaining to the way USB connectivity is controlled by Android got corrupted, and a fresh install was in order. Whatever it was, it worked and i am back in business. thanks to all those who attempted to help.
Sent From My Nexus 4 via XDA Premium 4
My dad has a Nexus 6P.
When he connects it to my Windows 10 PC or his own Windows 10 laptop, nothing appears in Computer (any USB mode on the phone).
Device Manager shows a yellow exclamation mark next to the device.
Trying to reinstall shows that an error occurs whilst installing 'MTP Device' (service installation section in INF invalid).
I have tried installing the standard Android USB drivers, no luck.
I've tried with and without USB debugging mode enabled.
Any ideas?
Is the device having any issues? Like is it boot looping or just dead?
If not, it definitely sounds like a driver issue. Open up your device manager and delete any Google / Android drivers and then reboot the PC. That part is pretty important. PCs can be a little wonky with drivers. After that install them via the method posted in Heisenberg's guide. Reboot the PC again and then try.
Guide Here.
RoyJ said:
Is the device having any issues? Like is it boot looping or just dead?
If not, it definitely sounds like a driver issue. Open up your device manager and delete any Google / Android drivers and then reboot the PC. That part is pretty important. PCs can be a little wonky with drivers. After that install them via the method posted in Heisenberg's guide. Reboot the PC again and then try.
Guide Here.
Click to expand...
Click to collapse
There are no drivers to uninstall in Device Manager. If I right-click on the (exclamation mark) device in question, I simply get 'Remove', which 100% doesn't uninstall drivers, presumably because no drivers are installed.
Also, the instructions there require a load of stuff (CMD, platform tools, Android debug bridge and all that rubbish), just to install the drivers. I doubt it's that complicated.
King Mustard said:
There are no drivers to uninstall in Device Manager. If I right-click on the (exclamation mark) device in question, I simply get 'Remove', which 100% doesn't uninstall drivers, presumably because no drivers are installed.
Also, the instructions there require a load of stuff (CMD, platform tools, Android debug bridge and all that rubbish), just to install the drivers. I doubt it's that complicated.
Click to expand...
Click to collapse
I've given you the tools to get it up and running, whether you choose to use them is up to you. If you read the guide, you'd see that you don't need to install the entire SDK. It's one of the first things mentioned in the drivers section. Good luck.
Edit: Read your post again. Seems you're a little confused. CMD is a program already on your Windows PC. You must use it in order to use fastboot. Fastboot and ADB are literally the drivers you need to install. Not "rubbish." Read that guide and take it to heart. There's a lot of learning ahead for you, no offense.
King Mustard said:
There are no drivers to uninstall in Device Manager. If I right-click on the (exclamation mark) device in question, I simply get 'Remove', which 100% doesn't uninstall drivers, presumably because no drivers are installed. Also, the instructions there require a load of stuff (CMD, platform tools, Android debug bridge and all that rubbish), just to install the drivers. I doubt it's that complicated.
Click to expand...
Click to collapse
Even if you don't wan't or need ADB/Fastboot, a link to the standalone USB drivers is provided in the guide. If you still have issues, an existing driver installation is likely causing the problem. There is a free tool called USBDeview you can use to get rid of the conflicting drivers.
King Mustard said:
My dad has a Nexus 6P.
When he connects it to my Windows 10 PC or his own Windows 10 laptop, nothing appears in Computer (any USB mode on the phone).
Device Manager shows a yellow exclamation mark next to the device.
Trying to reinstall shows that an error occurs whilst installing 'MTP Device' (service installation section in INF invalid).
I have tried installing the standard Android USB drivers, no luck.
I've tried with and without USB debugging mode enabled.
Any ideas?
Click to expand...
Click to collapse
If you just want to be able to transfer files back and forth between computer and phone you can try installing Huawei's Windows software which should download necessary drivers. I didn't personally find the software all that useful but it's another option if you aren't looking to do anything complicated with your phone.
http://consumer.huawei.com/minisite/HiSuite_en/index.html