Database Users

Google Maps, Facebook and ADB

Hello All.
I've had my UK, T-Mobile G1 for quite a while now. I have rooted it and it is running the latest CyanogenMod recovery image and ROM. I also have Apps2SD set up on my 8GB SD card, on a 512MB ext partition. This was all working fine until the problems below occurred...
I'm having some problems with several apps and ADB.
My PC runs Windows 7, 64 bit, and I can't seem to find a driver for the G1's ADB. I'm probably being incredibly stupid, but I just can't find one. I have used one before on Vista, where I had to set some boot options, but I'm not too sure / happy about doing that on my nicely functioning Windows 7. And as my friend once said; "You mess around with windows, then windows will mess around with you"...
But, anyway, I can't seem to get ADB working, if someone could either send me a link to the drivers or guide me through it, I'd be grateful...
Also, it may be due to me running CyanogenMod, but if I try to update the Facebook app, it downloads the app, and then when it tries to install, gives me the error "Installation Unsuccessful - Incompatible Update".
And with the Google Maps app, it says "Installation unsuccessful - Package file was not signed correctly". This may be due to me trying to get the hacked version of the app to get the Google Maps Navigation working in the UK, but I couldn't get that to work, so I uninstalled it and Nav Launcher, and now when I try to update from the Market it gives me that error.
I've seen a guide online with ADB commands, but as I have no access to ADB, I'm a tad screwed. I've tried runnign the commands in the Terminal Emulator in the phone, which does approximately nothing whatsoever.
So, can anyone give me any guidance on any of my Android problems?
Thanks in advance - Ethan

To the best of my knowledge no one has successfully used ADB with Windows 7/64bit

jamesrdorn said:
To the best of my knowledge no one has successfully used ADB with Windows 7/64bit
Click to expand...
Click to collapse
Ah. Looks like I'll be reinstalling Ubuntu then for the ADB. Thank you for such a fast response.
- Ethan

jamesrdorn said:
To the best of my knowledge no one has successfully used ADB with Windows 7/64bit
Click to expand...
Click to collapse
Lies, I'm running windows 7 64bit and ADB works fine.

chris4500uk said:
Lies, I'm running windows 7 64bit and ADB works fine.
Click to expand...
Click to collapse
In that case, do you remember where you obtained the driver from? I would love a link, or a zip file or something...

I'm on Vista x64 SP2 and I can use ADB just fine. You just need to download the SDK and then get the USB driver through there. It used to come included, but now you need to use the ADV and SDK manager and download the drivers as an SDK Component through there.
After that, make sure your phone is set to USB Debugging mode and plug it in then point windows to the new drivers. If it doesn't want to install the new drivers, you might need to remove the old ones first. I had to use USB Deview (DL link at bottom of page) and removed all installed HTC drivers. After that I plugged my G1 back in, pointed it at the newly downloaded drivers and all was well.

I'm running adb/fastboot/android sdk on win7 64b ultimate. The drivers are included in the sdk download. Once you download the sdk, make sure you have java installed. (I had to install JRE and JDK to get it to work properly, not sure if this was needed) Anyhow, when you have the sdk downloaded, run the sdk setup program. Go to settings and check the box for force update (unsure of the exact terminology used there) then go to available updates and your drivers are the last option on the list.

Getting ADB to work on Windows 8? (Manual upgrade to Android 4.2)

Hi guys,
I currently have a problem with my ADB which doesn't seem to work with Windows 8. I set up everything as I did on Windows 7 before (including Environment Variables), but the ADB doesn't detect my Nexus 7 (List of devices attached is empty)
I think it might be a driver issue (see the screenshot attached). I also tried it with my HTC One X and it doesn't detect it either.
Does anyone have any idea how to get it to work? My devices are both unrooted and locked.
I wanted to install the upgrade to Android 4.2 for the N7.
Hopefully somebody can help me.
Thanks in advance!
EDIT:
I btw also tried the Nexus 7 Toolkit from here and I also installed the Google Drivers through Android SDK.
When trying to install the drivers through Nexus 7 Toolkit the following error occurs:
Installing Windows 7 Drivers Please wait
Operation Started
android_winusb.inf
The resource loader cache doesn't have loaded MUI entry.
1
0
An Error Occured. Returning to Main Menu.
---------------------------------------------------------------------------------
If you got the message [the resource loader cache doesn't have loaded mui entry]
during the installation procedure dont worry as the drivers have been installed.
Click to expand...
Click to collapse

PCServe said:
Hi guys,
I currently have a problem with my ADB which doesn't seem to work with Windows 8. I set up everything as I did on Windows 7 before (including Environment Variables), but the ADB doesn't detect my Nexus 7 (List of devices attached is empty)
I think it might be a driver issue (see the screenshot attached). I also tried it with my HTC One X and it doesn't detect it either.
Does anyone have any idea how to get it to work? My devices are both unrooted and locked.
I wanted to install the upgrade to Android 4.2 for the N7.
Hopefully somebody can help me.
Thanks in advance!
EDIT:
I btw also tried the Nexus 7 Toolkit from here and I also installed the Google Drivers through Android SDK.
When trying to install the drivers through Nexus 7 Toolkit the following error occurs:
Click to expand...
Click to collapse
Do you have Android SDK installed?, if so try the following, you're using Windows 8, right?
On the 'old' Windows Desktop, right-click on the bottom left corner
> Select 'Command Prompt (Admin)'
> type ' devmgmt.msc '
> Right click on the driver with warning sign and select update driver > select BROWSE and go to the extras\google\usb_driver\ folder of your SDK and then update the driver. Did that resolve the issue?

It works for the Nexus 7 when it's running, not in fastboot though

PCServe said:
It works for the Nexus 7 when it's running, not in fastboot though
Click to expand...
Click to collapse
Have you rebooted the PC since installing the drivers?, if not give that a go and try again, they may need a reboot to complete the installation.

Yes, I tried to restart the computer as well as the tablet several times. When the system is running on the N7, the drivers are detected and everything works fine, even ADB. But in fastboot it shows the warning sign in Device Manager and when I try installing the drivers either from the SDK Google Drivers or the Nexus 7 Toolkit drivers it says
Windows was unable to install your Nexus
Windows could not find driver software for your device.
If you know the manufacturer of your device, you can visit its website and check the support section for driver software.
Click to expand...
Click to collapse
I also tried the drivers from ASUS with the same result.

PCServe said:
Yes, I tried to restart the computer as well as the tablet several times. When the system is running on the N7, the drivers are detected and everything works fine, even ADB. But in fastboot it shows the warning sign in Device Manager and when I try installing the drivers either from the SDK Google Drivers or the Nexus 7 Toolkit drivers it says
I also tried the drivers from ASUS with the same result.
Click to expand...
Click to collapse
Did you try browsing to the driver location instead of letting Windows find the driver?
This driver has helped others
http://forum.xda-developers.com/showthread.php?t=1766220

PCServe said:
Yes, I tried to restart the computer as well as the tablet several times. When the system is running on the N7, the drivers are detected and everything works fine, even ADB. But in fastboot it shows the warning sign in Device Manager and when I try installing the drivers either from the SDK Google Drivers or the Nexus 7 Toolkit drivers it says
I also tried the drivers from ASUS with the same result.
Click to expand...
Click to collapse
turn off driver signing and then do it.Mine works fine in Windows 8..check this for reference:-
http://forums.mydigitallife.info/th...ble-driver-signature-enforcement-in-Windows-8

Thanks, using unsigned drivers worked perfectly
Device Manager says I have a Galaxy Nexus though, but patching the update worked anyway!
Thanks alot!

PCServe said:
Thanks, using unsigned drivers worked perfectly
Device Manager says I have a Galaxy Nexus though, but patching the update worked anyway!
Thanks alot!
Click to expand...
Click to collapse
Glad to be of help

[Q] Windows 7 fails to install MTP driver

I recieved my N4 yesterday.
When I try to connect it to my notebook (running Windows 7 Professional), the installation of the MTP driver fails. The error message says something like "driver could not be found". ADB however works without problems. (I allready debugged some apps on the phone.)
I tried installing the drivers from the toolkit, but it didn't work.
On my brothers netbook the MTP drivers were installed successfully. But I can't get it working on my notebook.
Can anyone help me?

mseebass said:
I recieved my N4 yesterday.
When I try to connect it to my notebook (running Windows 7 Professional), the installation of the MTP driver fails. The error message says something like "driver could not be found". ADB however works without problems. (I allready debugged some apps on the phone.)
I tried installing the drivers from the toolkit, but it didn't work.
On my brothers netbook the MTP drivers were installed successfully. But I can't get it working on my notebook.
Can anyone help me?
Click to expand...
Click to collapse
I was just having this problem but I fixed mine by changing the USB port. Not sure if itll help but worth a try.

bigcrav said:
I was just having this problem but I fixed mine by changing the USB port. Not sure if itll help but worth a try.
Click to expand...
Click to collapse
Thanks for your help. I allready tried an other usb port. It did'nt work.

I wanted to avoid it but I reinstalled windows. Now it works. Thanks again.

Hmm, messed with this problem for ages yesterday, mtp installed fine in normal mode but refused when in 'usb debugging' mode
simple fix, find your wpdmtp.inf file in windows/inf
edit it like shown, look for the [Generic.NTx86] and [Generic.NTamd64] entries near the top of the file........
[Generic.NTx86]
%GenericMTP.DeviceDesc%=MTP, USB\MS_COMP_MTP
%GenericMTP.DeviceDesc%=MTP, USB\VID_18D1&PID_4EE2&MI_00
[Generic.NTamd64]
%GenericMTP.DeviceDesc%=MTP, USB\MS_COMP_MTP
%GenericMTP.DeviceDesc%=MTP, USB\VID_18D1&PID_4EE2&MI_00
...then update the driver in device manager, use automatic search
just make sure the 'VID_18D1&PID_4EE2&MI_00' matches your device id, check in device manager.. but i'm guessing all nexus 4 are the same.. usb debugging mode

I did a clean install of windows and that solved the issue for me. Thanksfor your help anyway.

I usually see what drivers do install, like adb or whatever, and then remove/uninstall them AND delete them
Then installed this pack
http://forum.xda-developers.com/showthread.php?t=1998650
then connect to a different USB port and try again with the new drivers
Also, some USB hubs can be under-powered and cause problems.

meangreenie said:
just make sure the 'VID_18D1&PID_4EE2&MI_00' matches your device id, check in device manager.. but i'm guessing all nexus 4 are the same.. usb debugging mode
Click to expand...
Click to collapse
Just FYI, just got a Nexus 4 from T-Mobile yesterday and the device ID is slightly different:
VID_18D1&PID_4EE2&MI_01
01 at the end instead of 00
---------- Post added at 09:11 AM ---------- Previous post was at 08:53 AM ----------
Fitchman said:
I usually see what drivers do install, like adb or whatever, and then remove/uninstall them AND delete them
Then installed this pack
http://forum.xda-developers.com/showthread.php?t=1998650
then connect to a different USB port and try again with the new drivers
Also, some USB hubs can be under-powered and cause problems.
Click to expand...
Click to collapse
How/where do you install those files/drivers? There are no instructions.

lannister80 said:
How/where do you install those files/drivers? There are no instructions.
Click to expand...
Click to collapse
When Windows asks where the drivers are you point to the folder with the ones you want to use...

EddyOS said:
When Windows asks where the drivers are you point to the folder with the ones you want to use...
Click to expand...
Click to collapse
It doesn't ask. I plug in the phone, and Windows says it can't install the MTP driver.
If I go into Device Manager and find the phone (with the yellow triangle and !) and select Update Driver Software, then navigate to the i386 folder from the Universal Naked Driver (on an i5 system), it tells me that "The best driver for your device is already installed" or something similar.
Of course, if I uninstall the device from device manager (and presumably the bad MTP driver as well), it disappears, so I have nothing to point to to install the drivers.

Earlier today I reinstalled the drivers for my N4 on my work PC (Vista Business) and I had to reboot before it recognised the N4 as an MTP Device - prior to that it only saw it as an 'MTP Device'. Now it sees at 'Nexus 4'

I have a similar problem I have a kindle fire
I have install the ADB driver but am having extreme difficulties getting the MTP drivers to work
I have tried everything (every solution on Google)
and nothing works
I've tried the "Media Transfer Protocol Porting Kit"
I tried to get Microsoft help they gave me the run around and confused me even more
here is the conversation
Microsoft: "Thank you for that information
Nathaniel I was checking your product key and it is blocked that is why you can not connect these devices to your computer, you may be a victim of counterfeit software so in this case since it is an OEM computer which means that the manufacture of the computer installed Windows 7 on your computer I recommend you to contact the manufacture of your computer to see if they have an option in order to resolve this issue you are having."
me: when i contact them what do I ask for?
Microsoft: You need to ask for a new product key
me: I am confused what does this mean? that the manufacturer put windows 7 OS on here illegally? but all PC's come with windows OS so every PC in the world is suspect to counterfeiting
them: No, this could be because someone still some information of your computer and use the product key to try to activate Windows until the product key got blocked
No, the name is not involved in this case it is jut the product key
what do I do?
is there an alternative to MTP drivers?

Solved
Hi, i had the same problem described in previous posts and I managed to solve thanks to what is written by meangreenie.
In practice, in the windows\inf of my Windows 7 the file wpdmtp.inf was no longer present but there is only the "compiled" version (wpdmtp.pnf).
I retrieved the file from an earlier version founded in he folder Winsys and so the LG driver are installed without further problems.

Jon McDougal said...
You might be using the wrong driver (Android ADB) instead of the MTP driver. This happened to me the other day!
If you're in Debug Mode, you've already done the first step I was going to suggest.
Here's the second step that worked for me: Open Device Manager -> Click Android Device (top of my list) which exposes "Android Composite ADB Interface" -> Right click that device -> Update Driver Software -> Browse My computer for driver software -> Let me pick from a list of device drivers on my computer -> then choose "MTP USB Device" -> Next
Mine installed the MTP driver and then the N4 opened normally.
Click to expand...
Click to collapse
That works for me with USB Debug ticked and in MTP Mode but not in PTP Mode (on CM10.2-nightly-20130817). I absolutely can't see my pics in no way... (I suppose this is a bug from Google to be fixed in further updates). ADB and FB are correctly working as tested with NexusRootToolkit 1.7.1 Drivers Test.
May it help to delete original DCIM folder and start from a new one??
edit: Shame on me... I forgot that I've formatted my SDcard, so I've no picture in DCIM folder.... Sorry! So I can say that McDougal trick totally worked for me!

try to check the device manager to check the missing drivers with ! mark

Maybe I'm not completely getting the problem, but just doing this worked fine for me:
danielms22 said:
Enable USB debbuging in your phone. Go to Settings -> about phone -> tap about 10 times on build number item until USB debbuging is unlocked.
Also, on your computer go to the device manager, look for your phone, if you find it, right click on it, then update Driver Software, browse computer, Let me pick from a list of device drivers on my computer, USB composite device
That should do it.
Click to expand...
Click to collapse
No need for additional driver download or anything...

Finally a working solution
Finally I found a solution.
Visit answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/mtp-usb-device-drivers-will-not-install-correctly/0ee71b7c-4ae7-403f-abbb-63c7ed9a79f9?rtAction=1387606800207 and search for the "Bret B"'s answer which has also been marked as the most helpful answer. It works perfectly. He simply says..
Go to the Registry Editor (Start –> Run –>type in, “regedit” (without the quotes) then click OK.
Search the following key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\
Go upto Edit>Find, type in or copy/paste Portable Devices
In the right hand pane you will see the (Default) value “Portable Devices” on the string
Once found, you see a string value called UpperFilters –> delete it!
Reconnect the device. Finished!

No ADB mode, driver issue?

I'm Italian, sorry for my English.
A few days ago I unlocked the bootloader via Toolkit, rooted and flashed the TWRP recovery _.
But I had hard difficulty:
After driver installed, I unlocked bootloader, enable debugging and then NOTHING!
In practice, the N7 was recognized by windows 7 64bit only in FastReboot mode ..
I tried in every way possible, deleted and reinstalled the driver 50 times, restored windows to a previous point, installed the drivers manually tried without toolkit, but how ADB just do not want to know.
For hours I was still with the bootloader unlocked but without root, until came to my rescue a friend with another notebook but same windows 7 64. Load the Toolkit, install the drivers and everything goes perfectly, I do everything in 5 minutes.
On my laptop there is always the issue driver ADB, in the future I still need my PC recognized the N7 in ADB, how can I do?

One thing that I think is not well understood is that there is no "Generic Class Driver" for ADB nor for fastboot...
... even though the very driver that works for one mode (or phone/tablet device) may be perfectly fine with a different device. The wire protocol for both fastboot and adb are extremely simplistic.
So, what that means is that if the Hardware ID used by the USB device endpoint registers on the bus with a different VendorID/ProductID, Windows will (correctly) not use a previously-installed ADB driver, or previously installed fastboot driver - even though they would probably work just fine.
Here is an example. The Nexus 7 registers the following Hardware ID when ADB debugging is turned on in the OS:
USB\VID_18D1&PID_4E42&REV_9999&MI_01
USB\VID_18D1&PID_4E42&MI_01
On the other hand, if you are using TWRP, it's adbd daemon shows up on the PC as:
USB\VID_18D1&PID_D001&REV_9999
USB\VID_18D1&PID_D001
This means that you might need to install a different driver for using the ADB with the OS, and a different driver for ADB under TWRP - even though it is exactly the same hardware on the other end of the cable! In the absence of a generic class driver for a given USB endpoint, Windows tries to match drivers in it's local (& internet) database based on this VID/PID pair.
If you have a look at the [ADB/FB/APX Driver] Universal Naked Driver 0.72 thread - and download it and have a look at it's included "android_winusb.inf" file - you will see literally hundred of different VID/PID pairs in the driver's android_winusb.inf file in the installer package, corresponding to many hundreds of phones/tablets. Same driver with hundreds of devices listed as compatible.
In the past I recall taking the Google (SDK) USB driver, and manually editing into place matching VID/PID pairs for a HTC phone into the .inf file. It worked perfectly; I probably flashed that phone hundreds if not thousands of times using the Google Driver (My PC is a Windows 7 Pro x64 machine btw).
Anyhow, I have pulled this stunt twice now - once editing the .inf file for the Google Driver, and I did it once with the Universal Naked driver too. You can choose which driver you want to start with.
If you want to give it a roll, you can start with any of those three drivers:
- Google (SDK) USB driver
- XDA "Universal Naked" driver
- Asus Nexus 7 USB Driver (Look under Download)
Note that since you are using W7 x64, make sure that you add each new entries to the .inf file twice - once in the ".NTx86" section, and duplicated again in the ".NTamd64" section. When editing .INF files, make sure to use an editor which preserves simple text file formatting - use "notepad", not "wordpad"
If you want a reference for what values to use, see the bottom end of this post. You should see exactly these same values in your Device Manager, however.
Note that if you see the device show up in the Device Manager as being correctly identified and marked as "working normally" - but it doesn't work - you should probably remove that driver and re-install from a different driver package.
This would certainly be the case for any drivers you saw associating with VID/PID pairs that look like:
VID_18D1&PID_4E40 bootloader/fastboot
VID_18D1&PID_4E41 single adb
VID_18D1&PID_4E42*&MI_01 composite adb
VID_0955&PID_7330 avx mode
VID_18D1&PID_D001 adb in TWRP (maybe CWM too, I didn't check)
That's a lot to throw at you, especially with Italian <=> English in the mix.
Feel free to ask questions.
bftb0

Hello,
I tried to follow your advice but I have not solved.
I'll explain what I did, so you can correct me.
-Uninstalled previous drivers (from device manager, control panel)
-Restart the PC
-Modified the inf file. Package Asus Nexus 7 USB driver (ntx86 and NTamd64 sections) attach screenshots
-Linked N7 (usb debugging actived)
-Found portable device in device manager, update drivers manually from the Nexus 7 Asus USB drivers
I tried to change also too XDA "Universal Naked" driver by following the same procedure.
I tried to create another account on my pc, but no ADB!
View attachment 1734997

Did you update to 4.2.2?
The is something to do with adb in that update, needing a password or something. I am not sure but if you did update you might want to check that.
Sent from my Nexus 10 using Tapatalk HD

stonebear said:
Did you update to 4.2.2?
The is something to do with adb in that update, needing a password or something. I am not sure but if you did update you might want to check that.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Use "Google USB drivers" you get after you install from here http://developer.android.com/sdk/index.html
Its drivers work with 4.2.2
I got 4.2.2. rooted with ADB working now via only this and no other method

No problem with adb in 4.2.2... I tested yesterday (no need psw too...)
stonebear said:
Did you update to 4.2.2?
The is something to do with adb in that update, needing a password or something. I am not sure but if you did update you might want to check that.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse

Marco16V said:
-Found portable device in device manager, update drivers manually from the Nexus 7 Asus USB drivers
Click to expand...
Click to collapse
Is this the only device which shows up in the device manager? The "Portable Device" is either the MTP or PTP endpoint - not ADB. The latter (adb) should show up elsewhere in the device manager.
You should certainly NOT be trying to install fastboot/adb driver on MTP/PTP endpoints!
I think perhaps I am not understanding because I am guessing at certain details.
Q1) Do the drivers appear to install correctly?
Q2) When you have the N7 in the corresponding mode - whether or not you observe (device manager) "working normally" or "unknown device" - do you see the following Hardware IDs showing up in the device manager?
Bootloader Fastboot Mode:
USB\VID_18D1&PID_4E40&REV_0000
USB\VID_18D1&PID_4E40
OS adb:
USB\VID_18D1&PID_4E42&REV_9999&MI_01
USB\VID_18D1&PID_4E42&MI_01
TWRP adb (Possibly also CWM adb, I haven't checked it) :
USB\VID_18D1&PID_D001&REV_9999
USB\VID_18D1&PID_D001
Q3) I presume you went through the same install sequence on your PC that succeeded on the other laptop - in the event the problem is a hardware problem, did you try a different cable or USB port on your PC?
Q4) When you remove drivers, are you requesting that the drivers be removed from the PC?
The 4.2.2 authentication issue might be an issue (although I suspect this is a adb program version issue, not a driver version issue. In any event, it wouldn't effect the behavior of adb in TWRP/CWM.
Sorry for all the questions.

bftb0 said:
Is this the only device which shows up in the device manager? The "Portable Device" is either the MTP or PTP endpoint - not ADB. The latter (adb) should show up elsewhere in the device manager.
You should certainly NOT be trying to install fastboot/adb driver on MTP/PTP endpoints!
I think perhaps I am not understanding because I am guessing at certain details.
Q1) Do the drivers appear to install correctly?
Q2) When you have the N7 in the corresponding mode - whether or not you observe (device manager) "working normally" or "unknown device" - do you see the following Hardware IDs showing up in the device manager?
Bootloader Fastboot Mode:
USB\VID_18D1&PID_4E40&REV_0000
USB\VID_18D1&PID_4E40
OS adb:
USB\VID_18D1&PID_4E42&REV_9999&MI_01
USB\VID_18D1&PID_4E42&MI_01
TWRP adb (Possibly also CWM adb, I haven't checked it) :
USB\VID_18D1&PID_D001&REV_9999
USB\VID_18D1&PID_D001
Q3) I presume you went through the same install sequence on your PC that succeeded on the other laptop - in the event the problem is a hardware problem, did you try a different cable or USB port on your PC?
Q4) When you remove drivers, are you requesting that the drivers be removed from the PC?
The 4.2.2 authentication issue might be an issue (although I suspect this is a adb program version issue, not a driver version issue. In any event, it wouldn't effect the behavior of adb in TWRP/CWM.
Sorry for all the questions.
Click to expand...
Click to collapse
When the drivers are not installed and I connect to pc N7, is only recognized as a portable device, then later recognized as Google Nexus 7.
To install the drivers (modified as described) I click reinstall driver, then later recognized (if connected to pc in android mode, with usb debugging actived) as Android Device in another voice, ADB interface. But is not recognized by the toolkit under adb devices, and even when I try using cmd.
1-When I install the drivers. seem to be installed correctly.
2-Sorry, where can I find Hardware IDs in Device Manager? What is the difference between OS adb and TRWP adb?
3 - In other pc (with same N7, same cable, same driver, same toolkit) I had no problems. I tried to change only the USB port.
4-I uninstall the driver from device manager (uninstall voice) and ask to be also uninstalled software from the PC
In some Italian forum, I found people with the same problems.
Solved by formatting PC. I would not do that ...
Thanks for your help, sorry for my English and my limited skills

AW: No ADB mode, driver issue?
Try to download the latest Android SDK and try to connect with that adb version. Adb with version < 1.0.31 will not work correctly with Android 4.2.2.
Sent from my Nexus 7 using xda app-developers app

AndDiSa said:
Try to download the latest Android SDK and try to connect with that adb version. Adb with version < 1.0.31 will not work correctly with Android 4.2.2.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I tried sdk but I have not solved.
I use Android 4.2.1. I'm having problems with the update! I can not update OTA (N7 stuck under the impending reboot). I also tried to download the zip file to upgrade the memory and flash it from recovery but the installation is not completed (error 7 build.prop).
I also tried to flash the factory image 4.2.1 (keeping userdata) and start again. Nothing, same mistakes!
Too many problems!

Marco16V said:
2-Sorry, where can I find Hardware IDs in Device Manager?
Click to expand...
Click to collapse
(Note I attached some pictures below)
From the Device Manager:
- Select the Device in question by right-clicking. Choose "Properties"
- A window with three tabs will appear: General, Driver, and Details. Select Details
- The "Property" combo-box-selector has 20 or 30 items - the 2nd one in the list is Hardware Ids. I attached two pictures from Win7-Pro-x64 (below)
But note as I said before: You should NOT be seeing the ADB endpoint under "Portable Devices" - if ADB Debugging is turned on in the OS, you should see it under "Android Phone" or something similar. In any event, the hardware Ids will identify it exactly
Marco16V said:
What is the difference between OS adb and TRWP adb?
Click to expand...
Click to collapse
Well, as far as the behavior of the USB driver on the PC, almost nothing. Unfortunately - for better or for worse - both TeamWin (TWRP) and CWM authors put their ADB interface on the bus with the VID/PID pair of USB\VID_18D1&PID_D001, whereas the OS puts all its USB interfaces on 18D1/4Exx.
So, even if you get a driver installed for the OS "adb" mode (say by using the Google SDK USB driver or the Asus Nexus 7 driver), it won't work for the custom recovery... unless you fix up the driver installer package to have the matching VID/PID pairs (18D1/D001) in the .INF file for that driver.
I think folks find this confusing - they think, "wait, I have a ADB driver installed" - why does it not work?
OK, there are a couple more things to try (at least before I give up). Roughly they try to answer these questions:
Q1) Is this a toolkit issue, or a driver issue?
Q2) Is it a prior driver you installed that you are not observing that is causing the problem?
The first one (Q1) is easiest to diagnose: when your PC Device Manager indicates that a device is "working normally" - AND THE VID/PID ID MATCHES WHAT YOU SHOULD EXPECT FOR THE MODE THE TABLET IS IN (regular OS, recovery boot, fastboot mode), can you communicate with the device from the Windows command line? e.g.,
Code:
C:\foo> cd C:\blahblah\sdk-platform-tools-directory
C:\blahblah\sdk-platform-tools-directory> fastboot devices
or
C:\blahblah\sdk-platform-tools-directory> adb devices
If you can communicate with the tablet from the command line - your device ID will be printed by the above commands, then you don't have a driver problem at all - there is something screwy about the way your toolkit is installed.
OK, Q2 -
When Windows installs a driver, it caches it into a kind of database. I suppose it is possible that a prior driver installation might be causing trouble. You can observe - from the device manager - all the drivers that are installed - even for devices that are not currently connected to your computer.
This is done by setting the "devmgr_show_nonpresent_devices=1" environment variable. It can be done semi-permanently this way, or for a single invocation of the device manager this way..
See the third image attached (devmgr-all-devices.jpg ) - it is my computer in that "show all devices" mode. See all that rubbish in there? It's from other Android devices (HTC, Samsung, etc).
You can walk through each one of those - even the devices that are not currently attached - and inspect the VID/PID pair to see if they happen to match the values that you are expecting to see for the different operating modes on the Nexus 7. I'll leave it up to you whether you want to do this or not; it is a bit tedious. Just don't start deleting drivers willy-nilly if you don't know what they are associated with.
Marco16V said:
Thanks for your help, sorry for my English and my limited skills
Click to expand...
Click to collapse
I am understanding everything you are saying - and your english is far better than my italian
good luck!

[HOWTO] Installing HTC Drivers for adb/fastboot on Windows 8

Mod Message: OP's link is down. Please search the comments to find other's mirror. But please remember to use AV software to scan before you proceed to install, in case of malware or virus!
Instructions to installing HTC Drivers on Windows8 64Bit:
==========================================
1. Download the Windows7 (64 Bit) drivers here - R[COLOR="Red"]emoved[/COLOR]
2. Unzip to any location you want. Just remember where you put them.
3. Plug in your phone to your USB cable.
4. Open your Device Manager (Windows Key + X and select Device manager) and locate HTC under Other Devices and right click on it and select Update Driver Software
5. Select "Browse my computer for driver software"
6. Click Browse and then select the folder you unzipped with the drivers in it then click next.
7. It should now install your drivers and then in your device manager it will now show up "My HTC" under Android USB Devices.
Hope that helps anyone having troubles getting USB/HTC drivers working on Windows 8 (64bit).
*NOTE* I'm not sure if this will be the same for you guys but I had to plug my phone into USB slot 2. USB slot 3 would not work.
Just a little heads up
All credit for this guide goes to Hippie459MN for the original thread. Be sure to thank him for his work
I'm just posting it in this forum because it works fine and a lot of people aren't aware of this method

Awesome man. Don't even have my One but if I have problem with Windows 8, it's great that you already posted a solution.
Sent from my iPhone using Tapatalk 2

It took me quite a while of searching to actually find that guide but I'm glad I did otherwise I couldn't have unlocked my bootloader or rooted

Been trying to get the driver to work on my W8 laptop for my E3D. This worked for it after spending hours trying all sorts. Thanks a million. I will be sure to go through to the other thread and say thanks too.

If only I saw this before I spent hours last night trying to get adb to recognise my phone. I somehow got there in the end but this would've saved me a good two hours!
Sent from my HTC One using xda premium

Yeah, that's the guide I used a couple of weeks ago. Think I might have posted it in the rooting tutorial thread....would have been lost without it.
Sent from my HTC One using Tapatalk 2

cynogenmod jbean cm-10.1-20130411-EXPERIMENTAL-endeavoru-M3
I just lost connection to lappy after installing this rom...though device is getting recognized it wont let me update driver using guide can you help plz
:crying:

Bumping up

installed the drivers as instructed below but with win8 / 64-bit i can't get the one to mount the sdcard.
seems to work just fine on my win7 machine. any help with this?

trant01 said:
installed the drivers as instructed below but with win8 / 64-bit i can't get the one to mount the sdcard.
seems to work just fine on my win7 machine. any help with this?
Click to expand...
Click to collapse
it should show up as an MTP device when you plug it in

cachookaman said:
it should show up as an MTP device when you plug it in
Click to expand...
Click to collapse
i can't install a driver for the MTP device. should it be in that zip? i'm trying to get it to install from that directory and it says it can't find a driver for it....

Tried this technique and it still won't work.
Here's what I'm doing
- Uninstall all current drivers & HTC Sync
- Restart PC
- Your method exactly
- Restart PC
Phone when on normally connects to adb just fine,
but when I put it into the bootloader it takes around 15 seconds to detect it and then says it's unrecognised and gives the error below:
Device doesn't start. (Code 10)
A request for the USB BOS descriptor failed.
Any help would be appreciated. For now, I'm running a copy of W7 on an old 2.5" drive... not ideal.

Tried this technique and it still won't work.
@petedavison93 and the owner of this thread, did you guys find a fix to pete's issue as I'm having the same issue as Pete, please help!

Had the same issue and installed different drivers several times without luck.
It was fixed for me by simply plugging in the phone into an USB port at the motherboard. The front USB and additional USB3 ports at the PC were not working, when the device is booted to the bootloader. They are working with adb only, when the phone is running normal.
I am running Win8x64.

Great Instructions
KidCarter93 said:
Instructions to installing HTC Drivers on Windows8 64Bit:
==========================================
1. Download the Windows7 (64 Bit) drivers here - http://d-h.st/23V
2. Unzip to any location you want. Just remember where you put them.
3. Plug in your phone to your USB cable.
4. Open your Device Manager (Windows Key + X and select Device manager) and locate HTC under Other Devices and right click on it and select Update Driver Software
5. Select "Browse my computer for driver software"
6. Click Browse and then select the folder you unzipped with the drivers in it then click next.
7. It should now install your drivers and then in your device manager it will now show up "My HTC" under Android USB Devices.
Hope that helps anyone having troubles getting USB/HTC drivers working on Windows 8 (64bit).
*NOTE* I'm not sure if this will be the same for you guys but I had to plug my phone into USB slot 2. USB slot 3 would not work.
Just a little heads up
All credit for this guide goes to Hippie459MN for the original thread. Be sure to thank him for his work
I'm just posting it in this forum because it works fine and a lot of people aren't aware of this method
Click to expand...
Click to collapse
I have the HTC EVO V 4G (Virgin Mobile) The ONLY difference on my installation of the drivers was under Other Devices, instead of HTC mine was listed as EVO. Worked perfect first try..TY

Great post
Great post and link, this worked straight away and allowed direct connection to Eclipse

Thankz I must try this looking for this

I just install HTC sync, done deal.
Sent from my HTC One using Tapatalk 2

Anyone happen to know where I can find some windows 7 32bit drivers. Windows 8 32bit isn't a fan of 64bit software.

It isn't a problem with the HTC drivers. It's the usb drivers from Ms for Intel 3.0 bus. I found a thread that I'm searching again for that give the instructions on replacing the signed ms driver with an unsigned win 7 64bit host controller driver. It's two files and you need to first allow unsigned drivers in windows security. Needless to say it's fine now on my 3 ports.
Sent from my HTC One using xda premium