I'm Italian, sorry for my English.
A few days ago I unlocked the bootloader via Toolkit, rooted and flashed the TWRP recovery _.
But I had hard difficulty:
After driver installed, I unlocked bootloader, enable debugging and then NOTHING!
In practice, the N7 was recognized by windows 7 64bit only in FastReboot mode ..
I tried in every way possible, deleted and reinstalled the driver 50 times, restored windows to a previous point, installed the drivers manually tried without toolkit, but how ADB just do not want to know.
For hours I was still with the bootloader unlocked but without root, until came to my rescue a friend with another notebook but same windows 7 64. Load the Toolkit, install the drivers and everything goes perfectly, I do everything in 5 minutes.
On my laptop there is always the issue driver ADB, in the future I still need my PC recognized the N7 in ADB, how can I do?
One thing that I think is not well understood is that there is no "Generic Class Driver" for ADB nor for fastboot...
... even though the very driver that works for one mode (or phone/tablet device) may be perfectly fine with a different device. The wire protocol for both fastboot and adb are extremely simplistic.
So, what that means is that if the Hardware ID used by the USB device endpoint registers on the bus with a different VendorID/ProductID, Windows will (correctly) not use a previously-installed ADB driver, or previously installed fastboot driver - even though they would probably work just fine.
Here is an example. The Nexus 7 registers the following Hardware ID when ADB debugging is turned on in the OS:
USB\VID_18D1&PID_4E42&REV_9999&MI_01
USB\VID_18D1&PID_4E42&MI_01
On the other hand, if you are using TWRP, it's adbd daemon shows up on the PC as:
USB\VID_18D1&PID_D001&REV_9999
USB\VID_18D1&PID_D001
This means that you might need to install a different driver for using the ADB with the OS, and a different driver for ADB under TWRP - even though it is exactly the same hardware on the other end of the cable! In the absence of a generic class driver for a given USB endpoint, Windows tries to match drivers in it's local (& internet) database based on this VID/PID pair.
If you have a look at the [ADB/FB/APX Driver] Universal Naked Driver 0.72 thread - and download it and have a look at it's included "android_winusb.inf" file - you will see literally hundred of different VID/PID pairs in the driver's android_winusb.inf file in the installer package, corresponding to many hundreds of phones/tablets. Same driver with hundreds of devices listed as compatible.
In the past I recall taking the Google (SDK) USB driver, and manually editing into place matching VID/PID pairs for a HTC phone into the .inf file. It worked perfectly; I probably flashed that phone hundreds if not thousands of times using the Google Driver (My PC is a Windows 7 Pro x64 machine btw).
Anyhow, I have pulled this stunt twice now - once editing the .inf file for the Google Driver, and I did it once with the Universal Naked driver too. You can choose which driver you want to start with.
If you want to give it a roll, you can start with any of those three drivers:
- Google (SDK) USB driver
- XDA "Universal Naked" driver
- Asus Nexus 7 USB Driver (Look under Download)
Note that since you are using W7 x64, make sure that you add each new entries to the .inf file twice - once in the ".NTx86" section, and duplicated again in the ".NTamd64" section. When editing .INF files, make sure to use an editor which preserves simple text file formatting - use "notepad", not "wordpad"
If you want a reference for what values to use, see the bottom end of this post. You should see exactly these same values in your Device Manager, however.
Note that if you see the device show up in the Device Manager as being correctly identified and marked as "working normally" - but it doesn't work - you should probably remove that driver and re-install from a different driver package.
This would certainly be the case for any drivers you saw associating with VID/PID pairs that look like:
VID_18D1&PID_4E40 bootloader/fastboot
VID_18D1&PID_4E41 single adb
VID_18D1&PID_4E42*&MI_01 composite adb
VID_0955&PID_7330 avx mode
VID_18D1&PID_D001 adb in TWRP (maybe CWM too, I didn't check)
That's a lot to throw at you, especially with Italian <=> English in the mix.
Feel free to ask questions.
bftb0
Hello,
I tried to follow your advice but I have not solved.
I'll explain what I did, so you can correct me.
-Uninstalled previous drivers (from device manager, control panel)
-Restart the PC
-Modified the inf file. Package Asus Nexus 7 USB driver (ntx86 and NTamd64 sections) attach screenshots
-Linked N7 (usb debugging actived)
-Found portable device in device manager, update drivers manually from the Nexus 7 Asus USB drivers
I tried to change also too XDA "Universal Naked" driver by following the same procedure.
I tried to create another account on my pc, but no ADB!
View attachment 1734997
Did you update to 4.2.2?
The is something to do with adb in that update, needing a password or something. I am not sure but if you did update you might want to check that.
Sent from my Nexus 10 using Tapatalk HD
stonebear said:
Did you update to 4.2.2?
The is something to do with adb in that update, needing a password or something. I am not sure but if you did update you might want to check that.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Use "Google USB drivers" you get after you install from here http://developer.android.com/sdk/index.html
Its drivers work with 4.2.2
I got 4.2.2. rooted with ADB working now via only this and no other method
No problem with adb in 4.2.2... I tested yesterday (no need psw too...)
stonebear said:
Did you update to 4.2.2?
The is something to do with adb in that update, needing a password or something. I am not sure but if you did update you might want to check that.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Marco16V said:
-Found portable device in device manager, update drivers manually from the Nexus 7 Asus USB drivers
Click to expand...
Click to collapse
Is this the only device which shows up in the device manager? The "Portable Device" is either the MTP or PTP endpoint - not ADB. The latter (adb) should show up elsewhere in the device manager.
You should certainly NOT be trying to install fastboot/adb driver on MTP/PTP endpoints!
I think perhaps I am not understanding because I am guessing at certain details.
Q1) Do the drivers appear to install correctly?
Q2) When you have the N7 in the corresponding mode - whether or not you observe (device manager) "working normally" or "unknown device" - do you see the following Hardware IDs showing up in the device manager?
Bootloader Fastboot Mode:
USB\VID_18D1&PID_4E40&REV_0000
USB\VID_18D1&PID_4E40
OS adb:
USB\VID_18D1&PID_4E42&REV_9999&MI_01
USB\VID_18D1&PID_4E42&MI_01
TWRP adb (Possibly also CWM adb, I haven't checked it) :
USB\VID_18D1&PID_D001&REV_9999
USB\VID_18D1&PID_D001
Q3) I presume you went through the same install sequence on your PC that succeeded on the other laptop - in the event the problem is a hardware problem, did you try a different cable or USB port on your PC?
Q4) When you remove drivers, are you requesting that the drivers be removed from the PC?
The 4.2.2 authentication issue might be an issue (although I suspect this is a adb program version issue, not a driver version issue. In any event, it wouldn't effect the behavior of adb in TWRP/CWM.
Sorry for all the questions.
bftb0 said:
Is this the only device which shows up in the device manager? The "Portable Device" is either the MTP or PTP endpoint - not ADB. The latter (adb) should show up elsewhere in the device manager.
You should certainly NOT be trying to install fastboot/adb driver on MTP/PTP endpoints!
I think perhaps I am not understanding because I am guessing at certain details.
Q1) Do the drivers appear to install correctly?
Q2) When you have the N7 in the corresponding mode - whether or not you observe (device manager) "working normally" or "unknown device" - do you see the following Hardware IDs showing up in the device manager?
Bootloader Fastboot Mode:
USB\VID_18D1&PID_4E40&REV_0000
USB\VID_18D1&PID_4E40
OS adb:
USB\VID_18D1&PID_4E42&REV_9999&MI_01
USB\VID_18D1&PID_4E42&MI_01
TWRP adb (Possibly also CWM adb, I haven't checked it) :
USB\VID_18D1&PID_D001&REV_9999
USB\VID_18D1&PID_D001
Q3) I presume you went through the same install sequence on your PC that succeeded on the other laptop - in the event the problem is a hardware problem, did you try a different cable or USB port on your PC?
Q4) When you remove drivers, are you requesting that the drivers be removed from the PC?
The 4.2.2 authentication issue might be an issue (although I suspect this is a adb program version issue, not a driver version issue. In any event, it wouldn't effect the behavior of adb in TWRP/CWM.
Sorry for all the questions.
Click to expand...
Click to collapse
When the drivers are not installed and I connect to pc N7, is only recognized as a portable device, then later recognized as Google Nexus 7.
To install the drivers (modified as described) I click reinstall driver, then later recognized (if connected to pc in android mode, with usb debugging actived) as Android Device in another voice, ADB interface. But is not recognized by the toolkit under adb devices, and even when I try using cmd.
1-When I install the drivers. seem to be installed correctly.
2-Sorry, where can I find Hardware IDs in Device Manager? What is the difference between OS adb and TRWP adb?
3 - In other pc (with same N7, same cable, same driver, same toolkit) I had no problems. I tried to change only the USB port.
4-I uninstall the driver from device manager (uninstall voice) and ask to be also uninstalled software from the PC
In some Italian forum, I found people with the same problems.
Solved by formatting PC. I would not do that ...
Thanks for your help, sorry for my English and my limited skills
AW: No ADB mode, driver issue?
Try to download the latest Android SDK and try to connect with that adb version. Adb with version < 1.0.31 will not work correctly with Android 4.2.2.
Sent from my Nexus 7 using xda app-developers app
AndDiSa said:
Try to download the latest Android SDK and try to connect with that adb version. Adb with version < 1.0.31 will not work correctly with Android 4.2.2.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I tried sdk but I have not solved.
I use Android 4.2.1. I'm having problems with the update! I can not update OTA (N7 stuck under the impending reboot). I also tried to download the zip file to upgrade the memory and flash it from recovery but the installation is not completed (error 7 build.prop).
I also tried to flash the factory image 4.2.1 (keeping userdata) and start again. Nothing, same mistakes!
Too many problems!
Marco16V said:
2-Sorry, where can I find Hardware IDs in Device Manager?
Click to expand...
Click to collapse
(Note I attached some pictures below)
From the Device Manager:
- Select the Device in question by right-clicking. Choose "Properties"
- A window with three tabs will appear: General, Driver, and Details. Select Details
- The "Property" combo-box-selector has 20 or 30 items - the 2nd one in the list is Hardware Ids. I attached two pictures from Win7-Pro-x64 (below)
But note as I said before: You should NOT be seeing the ADB endpoint under "Portable Devices" - if ADB Debugging is turned on in the OS, you should see it under "Android Phone" or something similar. In any event, the hardware Ids will identify it exactly
Marco16V said:
What is the difference between OS adb and TRWP adb?
Click to expand...
Click to collapse
Well, as far as the behavior of the USB driver on the PC, almost nothing. Unfortunately - for better or for worse - both TeamWin (TWRP) and CWM authors put their ADB interface on the bus with the VID/PID pair of USB\VID_18D1&PID_D001, whereas the OS puts all its USB interfaces on 18D1/4Exx.
So, even if you get a driver installed for the OS "adb" mode (say by using the Google SDK USB driver or the Asus Nexus 7 driver), it won't work for the custom recovery... unless you fix up the driver installer package to have the matching VID/PID pairs (18D1/D001) in the .INF file for that driver.
I think folks find this confusing - they think, "wait, I have a ADB driver installed" - why does it not work?
OK, there are a couple more things to try (at least before I give up). Roughly they try to answer these questions:
Q1) Is this a toolkit issue, or a driver issue?
Q2) Is it a prior driver you installed that you are not observing that is causing the problem?
The first one (Q1) is easiest to diagnose: when your PC Device Manager indicates that a device is "working normally" - AND THE VID/PID ID MATCHES WHAT YOU SHOULD EXPECT FOR THE MODE THE TABLET IS IN (regular OS, recovery boot, fastboot mode), can you communicate with the device from the Windows command line? e.g.,
Code:
C:\foo> cd C:\blahblah\sdk-platform-tools-directory
C:\blahblah\sdk-platform-tools-directory> fastboot devices
or
C:\blahblah\sdk-platform-tools-directory> adb devices
If you can communicate with the tablet from the command line - your device ID will be printed by the above commands, then you don't have a driver problem at all - there is something screwy about the way your toolkit is installed.
OK, Q2 -
When Windows installs a driver, it caches it into a kind of database. I suppose it is possible that a prior driver installation might be causing trouble. You can observe - from the device manager - all the drivers that are installed - even for devices that are not currently connected to your computer.
This is done by setting the "devmgr_show_nonpresent_devices=1" environment variable. It can be done semi-permanently this way, or for a single invocation of the device manager this way..
See the third image attached (devmgr-all-devices.jpg ) - it is my computer in that "show all devices" mode. See all that rubbish in there? It's from other Android devices (HTC, Samsung, etc).
You can walk through each one of those - even the devices that are not currently attached - and inspect the VID/PID pair to see if they happen to match the values that you are expecting to see for the different operating modes on the Nexus 7. I'll leave it up to you whether you want to do this or not; it is a bit tedious. Just don't start deleting drivers willy-nilly if you don't know what they are associated with.
Marco16V said:
Thanks for your help, sorry for my English and my limited skills
Click to expand...
Click to collapse
I am understanding everything you are saying - and your english is far better than my italian
good luck!
Related
Hello.
And bacon and spam:
I've recently upgraded my SGS to ICS (ICSSGS ROM) and started to develop a simple application.
So, now i've got to the point that the emulator starts to show its limitations, so i need to debug directly on the real device.
Well, i've been trying to make ADB recognize my phone, tried several usb drivers from several sites, none of them worked.
After several hours spanking windows, it's finally working (yes! almost 6 AM in the morning!).
What matters:
So, to anybody who have the same problem as i had, do the following:
0. Uninstall any drivers that you've tried before.
1. Extract the zip file that i've uploaded to anywhere you like.
2. Enable debugging on your phone and connect it to PC throught the USB cable
(Just connect it, don't mount)
3. On your computer, click Start -> Right click on "Computer" -> Manage
This will open the "Computer Management" window (it might take some seconds to load).
4. Click "Device Manager". Now you should find your device in the list. It must be really easy to find. It's called something like "GT-I9000" or "GalaxyS" and it has a yellow warning sign next to it.
5. Right click on it and choose "Update Driver Software". In the window that appears, choose "Browse my computer for driver software". It then asks you where is the driver.
6. Click the "Browse" button and choose the folder you extracted from my zip file.
(If you didn't change it, it must be called "Android Composite ADB Interface")
7. Click "Next" and cross your fingers. If you're lucky, it may work for you.
Final notes:
1. I'm not responsible for ANYTHING. Whatever you do, it's your own choise to do it. I guarantee absolutely nothing.
2. This is was tested on Windows 7 - 64 bits with Team ICSSGS RC4.2 ROM and Semaphore ICS 0.9.1 Kernel.
3. Have fun.
4. If you try this, please answer the topic and tell everybody if it's working for you (mentioning your Windows version and what ROM you use).
Driver file:
-> http://www.mediafire.com/?t8ekrd9ly3mwwbk
Missing file when installing driver on windows 7 x64
Hi,
I have recently installed the most recent Dark Knight ICS 4.0.4 build to my Samsung Galaxy S. The ROM seems very good but I'm an android app developer and need to be able to debug my applications on the device via USB.
I have tried the driver provided in the thread which won't install due to a missing file according to the Windows 7 x64 driver install wizard. The exact message is displayed after step 7 and says:
"Windows found driver software for your device but encountered an error while attempting to install it."
"Android Composite ADB interface"
"The system cannot find the file specified".
Is there a file missing in the package? Has anybody managed to get this driver working?
Cheers,
Ben
Does it say that it doesn't find a controller or that is there a missing file?
Anyway, please try this installer and let me know if it works for you:
http://www.mediafire.com/?v70501cxbzzdvc2
What's wrong with the Nexus S drivers available with Android SDK?
Google USB driver, R4 developer.android.com/sdk/win-usb.html
The SGS will present it self like that when it is running ICS/CM7/CM9.
Sent from my GT-I9000
METEMEDO said:
Does it say that it doesn't find a controller or that is there a missing file?
Anyway, please try this installer and let me know if it works for you:
http://www.mediafire.com/?v70501cxbzzdvc2
Click to expand...
Click to collapse
Dont work for me.
System: Windows 7 x64
Android 4.04 Dark Knight
Nevertheless thanks for your approach. I'll test if it works with the SDK Updater.
I'm going to test in my desktop this weekend to check if it works with it.
I have the same problem, but with WIndows 7 32 bit. Drivers from discusion doesn't work. Don't you have some for 32 bit?
I found SDK Components on developer.android.com, where is Android driver which suppose to work, but unfortunately ODIN still do not see phone.
I also have the same problem but mine is worse because my phone is completely down after I tried to restore from a GB ndriod backup failure , phone won't boot , cannot boot into recovery only in download mode but no way my 4 x computers would detect the phone now ....tried using heimdall in linux as well as sdb, no go....so sad...help...
Sent from my Dell Streak using XDA
Using Google USB drivers finally worked for me. They can be optionally installed with Android SDK using SDK manager (extras). After installation drivers can be found in <sdk>\extras\google\usb_driver.
Just follow the instructions in the first post to find your device from device manager with exclamation mark. Need at least one reboot to work and I also redirected the driver installation process to Google usb driver directory but now ADB finally recognizes my SGS (MyICS, Android 4.0.3).
Edit: Operating system Vista 64-bit
[Currently stuck in "error: device not found" while trying adb push -command. I will update if I find a workaround. Probably something to do with inf-file.]
For alternate .inf -file (optional):
Google "usb-drivers-not-working-after-flash-latest-rom-ota" and see post #12 to see alternative inf-file. Some have managed to make adb recognize the device with that file, but I have at least this far been unsuccessful.
Edit: Problem above was caused by me being stupid and trying to use push in shell, which caused phone unable to locate host system folders. I don't know if that inf file has anything to do with drivers working now, but go ahead and try it if doesn't work with the original .inf
I got my i9000 recognized using the latest drives from the Google sdk
That‘s great
http://ics.samsung-updates.com/addons/usb_driver.zip
oxidising said:
I got my i9000 recognized using the latest drives from the Google sdk
Click to expand...
Click to collapse
I tried last night didn't work for me.... (r18)
Sent from my Dell Streak using XDA
oxidising said:
I got my i9000 recognized using the latest drives from the Google sdk
Click to expand...
Click to collapse
Daha açık anlatabilir misiniz?
IWillExplain said:
http://ics.samsung-updates.com/addons/usb_driver.zip
Click to expand...
Click to collapse
... this driver actually worked for me...!
(Tiramisu ICS)
USB option has been lost in my galaxy s
RazorNova said:
Using Google USB drivers finally worked for me. They can be optionally installed with Android SDK using SDK manager (extras). After installation drivers can be found in <sdk>\extras\google\usb_driver.
Just follow the instructions in the first post to find your device from device manager with exclamation mark. Need at least one reboot to work and I also redirected the driver installation process to Google usb driver directory but now ADB finally recognizes my SGS (MyICS, Android 4.0.3).
Edit: Operating system Vista 64-bit
[Currently stuck in "error: device not found" while trying adb push -command. I will update if I find a workaround. Probably something to do with inf-file.]
For alternate .inf -file (optional):
Google "usb-drivers-not-working-after-flash-latest-rom-ota" and see post #12 to see alternative inf-file. Some have managed to make adb recognize the device with that file, but I have at least this far been unsuccessful.
Edit: Problem above was caused by me being stupid and trying to use push in shell, which caused phone unable to locate host system folders. I don't know if that inf file has anything to do with drivers working now, but go ahead and try it if doesn't work with the original .inf
Click to expand...
Click to collapse
What should i do after instaling SDK
IWillExplain said:
http://ics.samsung-updates.com/addons/usb_driver.zip
Click to expand...
Click to collapse
This worked for me
The very important thing is that newest Google USB driver is in
Code:
[B]<android-sdk>/extras/google/usb_driver/[/B]
location, not in
Code:
<android-sdk>/usb_driver
It really makes the difference !
these drivers only worked once...
all the other times killing and starting over adb i was getting error messages like "device not found" and "protocol fault" even though adb devices was listing the device online.
apparently i connected the phone to another USB3 port on my pc (front panel) and that was it!! it now works every time i type adb shell or adb devices.i no longer get any error messages.rather weird
anyway..i also wanted to be up to date with everything so i uninstalled all related software like the older java 6 jdk, Android SDK and the drivers mentioned above.
i followed the procedure below and installed all the latest packages:
latest java 7u5 JDK, the latest Android SDK (nstaller_r20.0.1-windows.exe) then ran sdk-manager and loaded http://developer.android.com/tools/extras/oem-usb.html#InstallingDriver google USB drivers rev 6. then installed these drives so i got the ADB composite interface on my device manager and it all works fine now.
I recenelty installed latest ICS , and SDK recognizes my phone as ACER ADB , when I'm pretty sure its a Samsung I9000 . I tried uninstalling the ACER ADB and install the one that the guy posted in the first post , and it didn't work , it said this driver is not compatible , oddly it reinstalled ACER ADB though. I can't even uninstall it at all , I removed all my Samsung drivers , and everything else I installed for Samsung , and its still there , I even tried removing the GOOGLE USB drivers , still there.
Neendless to say that the phone doesnt connect to the PC at all even though it says everything is alright. For example i got ths gPAD app , which uses the USB with Debugging to turn the phone into a mouse , but it says its not connected even though it is.
After enabling USB debugging on my Nexus 7, I still can't get "adb devices" to list my Nexus 7. I also tried switching its USB connection type from "media" to "camera", to no effect. I have Windows 7; I see a "Nexus" device under Other Devices in my device manager, but when I try to install the Google USB drivers from the Android SDK, Windows refuses to take it.
This is going to make development difficult Anyone know where I can find working USB drivers for Windows 7?
beandog said:
After enabling USB debugging on my Nexus 7, I still can't get "adb devices" to list my Nexus 7. I also tried switching its USB connection type from "media" to "camera", to no effect. I have Windows 7; I see a "Nexus" device under Other Devices in my device manager, but when I try to install the Google USB drivers from the Android SDK, Windows refuses to take it.
This is going to make development difficult Anyone know where I can find working USB drivers for Windows 7?
Click to expand...
Click to collapse
If you have updated the drivers from the SDK, then your problem is probably coming from the cable.
PS: Try not to use an extension cable
When I have had this problem in the past I have found that installing PDA net solves it.
Sent from my Galaxy Nexus using Tapatalk 2
download a sync software,for example,chinese use 360 mobile assistant,it will help you to connected with PC
Sent from my SHW-M190S using xda premium
i got the problem too,just install 360 mobile assistant ,it worked.but i dont know ,any mobile assistant
used in your city？
Sent from my SHW-M190S using xda premium
You may try to use device manager to solve the issue.:
Firstly please connect your Nexus 7 to you computer using the USB cable
included in the box.
Then on the tablet,
choose "Settings" -> "Storage" -> open the menu -> choose "USB computer connection" -> choose "MTP" or "PTP".
On your computer,
1. Control Panel -> Hardare and Sound -> View devices and printers
2. Click on Nexus.
3. Click on "Hardware" tab
4. Click on "Properties"
5. Click on "Change settings"
6. Click on "Driver" tab
7. Click on "Update drivers".
I'd suggest that you repeat these steps for both "MTP" and "PTP" connection types mentioned above.
Then on your computer, run "adb devices", the Nexus 7 would be listed in the
output of the adb command.
Enjoy.
Works with PTP mode - MTP mode doesn't
just for future reference...
By default it uses the MTP mode for USB. ADB is not working in this mode, even after i follow all the steps in above post.
Change it to use PTP (Camera mode), and ADB works !! go figure.
driving me crazy too.
First, windows did not recognize the thing in AdB mode. I managed to get around that with PDA net. But in cmd mode running "fastboot oem unlock" it just sits there saying "waiting for device". Also switched to both usb modes under "storage" as well as tried all usb ports on my pc (running Win 7 64bit). Using original cable.
Any other clues on what to do next?
bytecollektr said:
driving me crazy too.
First, windows did not recognize the thing in AdB mode. I managed to get around that with PDA net. But in cmd mode running "fastboot oem unlock" it just sits there saying "waiting for device". Also switched to both usb modes under "storage" as well as tried all usb ports on my pc (running Win 7 64bit). Using original cable.
Any other clues on what to do next?
Click to expand...
Click to collapse
ADB and fastboot may have two different drivers, this is the case with most other devices.
Anywho here's a link to the all inclusive driver bundle. Drivers was one of the reasons I only use a linux distro these days.
Unlawful said:
ADB and fastboot have two different drivers.
Anywho here's a link to the all inclusive driver bundle. Drivers was one of the reasons I only use a linux distro these days.
Click to expand...
Click to collapse
Still nothing. Deleted the drivers, and it obviously installed the new ones, since the name under the "device manager" changed. I go to the Android sdk and it still says waiting for device. Is there different versions of fastboot? Maybe its the wrong command? (fastboot oem unlock)
reddweb said:
just for future reference...
By default it uses the MTP mode for USB. ADB is not working in this mode, even after i follow all the steps in above post.
Change it to use PTP (Camera mode), and ADB works !! go figure.
Click to expand...
Click to collapse
This is how i got my ADB drivers to actuallly work right!! listen to this guy.
Nexcellent said:
This is how i got my ADB drivers to actuallly work right!! listen to this guy.
Click to expand...
Click to collapse
I have it in that mode, and it does not do anything, even with the new drivers.
bytecollektr said:
I have it in that mode, and it does not do anything, even with the new drivers.
Click to expand...
Click to collapse
Oh and fastboot is not available during normal operations and it has to be booted into the bootloader to use fastboot. Try using adb reboot bootloader and then when it restarts fastboot oem unlock.
I'm in the exact same situation
I'm having the same problem. I'm not exactly sure how to use the Naked Drivers pack. Can someone advise?
Easy as ADB...
Use the step by step instructions in the Nexus Root Toolkit found here;
http://forum.xda-developers.com/showthread.php?t=1766475
Hope that helps,
-CC
Set it to ptp mode, install updated sdk, and you will find proper adb driver in extras/google/usb-driver directory. After those steps adb started to work in my case' no need for third party downloads.
Sent from my Nexus 7 using xda app-developers app
I've been having the same issues with all of the new android devices I've tried to use adb on my computer for. I as able to make them work by manually installing the drivers in device manager. When you choose browse for drivers manually you can look through pre installed drivers and select adb interface and manually choose the drivers for adb and fast boot. Only issue I have is that it won't give adb root access and says rot is not available in production builds. Not sue if that's related or not.
Sent from my Nexus 7 using xda app-developers app
Windows 7 - Nexus 7 ADB Recognition
For me, like others, choosing either MTP or PTP from the Nexus 7's USB computer connection options didn't solve the issue. Updated to the latest version of the Android SDK Tools within Eclipse [version 20.0.1], and even uninstalled and re-installed the Google USB Driver [Revision 6] within the Android SDK manager, but no luck.
What ended up clearing the issue for me was to go to Computer Management, find the Nexus device with the question mark next to it, update the driver by browsing a location on the computer, browse to the location on your computer where you saved the Android SDK [the one with the following directories: add-ons, docs, extras, platforms, platform-tools, etc], and choose that very folder containing those folders I mentioned. It should search for a while then ask you whether or not to install some Asus/Google driver.
After installing that driver, my N7 was recognized by the "adb devices" command.
NOTE: Turns out when I updated the driver, my N7 was in PTP mode, and when I switched it to MTP mode, it was no longer recognized under adb devices. adb kill-server then adb start-server should get it recognized again when you switch between MTP and PTP.
Hope this works for all of you out there, like me, who really didn't want to take the 3rd party software route to overcome this problem.
Cheers.
ADB driver
Try to root toolkit from Wugfresh
http://forum.xda-developers.com/showthread.php?t=1766475
There is a very complete and usable guide to install ADB driver for most version of windows (XP->win 7).
You don't have to unlock or root; just use the interactive guide for driver install.
Good luck
bytecollektr said:
Still nothing. Deleted the drivers, and it obviously installed the new ones, since the name under the "device manager" changed. I go to the Android sdk and it still says waiting for device. Is there different versions of fastboot? Maybe its the wrong command? (fastboot oem unlock)
Click to expand...
Click to collapse
rootblock said:
For me, like others, choosing either MTP or PTP from the Nexus 7's USB computer connection options didn't solve the issue. Updated to the latest version of the Android SDK Tools within Eclipse [version 20.0.1], and even uninstalled and re-installed the Google USB Driver [Revision 6] within the Android SDK manager, but no luck.
What ended up clearing the issue for me was to go to Computer Management, find the Nexus device with the question mark next to it, update the driver by browsing a location on the computer, browse to the location on your computer where you saved the Android SDK [the one with the following directories: add-ons, docs, extras, platforms, platform-tools, etc], and choose that very folder containing those folders I mentioned. It should search for a while then ask you whether or not to install some Asus/Google driver.
After installing that driver, my N7 was recognized by the "adb devices" command.
NOTE: Turns out when I updated the driver, my N7 was in PTP mode, and when I switched it to MTP mode, it was no longer recognized under adb devices. adb kill-server then adb start-server should get it recognized again when you switch between MTP and PTP.
Hope this works for all of you out there, like me, who really didn't want to take the 3rd party software route to overcome this problem.
Cheers.
Click to expand...
Click to collapse
i'm having the issue with the mtp not being recognized in adb. can you be more specific in the adb kill-server and adb start-server.
I am trying to connect my Nexus 4 to my PC and use the ADB commands. I have the following problems:
ADB driver is installed and "USB Debugging" turned on the Nexus 4. Device shows up on Device Manager, however "adb devices" does not list the device and unable to communicate with the attached device.
The Nexus drive, regardless of MTP or PTP disappears from Windows Explorer when "USB Debugging" is turned on, Turning off "USB Debugging" brings back the drive.
USBView shows the device with a RED light, but it appears working on Device Manager.
I do not have this problem with my other laptop and desktop.
Using Windows 7 x64 Ultimate and Nexus 4 - Stock 4.2.2
Any help would be appreciated. Thanks.
akashi said:
I am trying to connect my Nexus 4 to my PC and use the ADB commands. I have the following problems:
ADB driver is installed and "USB Debugging" turned on the Nexus 4. Device shows up on Device Manager, however "adb devices" does not list the device and unable to communicate with the attached device.
The Nexus drive, regardless of MTP or PTP disappears from Windows Explorer when "USB Debugging" is turned on, Turning off "USB Debugging" brings back the drive.
USBView shows the device with a RED light, but it appears working on Device Manager.
I do not have this problem with my other laptop and desktop.
Using Windows 7 x64 Ultimate and Nexus 4 - Stock 4.2.2
Any help would be appreciated. Thanks.
Click to expand...
Click to collapse
I had sort of the same problem, try uninstalling the driver in device manager, then unplug and replug your USB. Then when you plugged in the USB go to device manager and right click on the device and click scan for hardware changes. See if that works.
I'm not sure if this is a problem caused by windows update or the new updated SDK, but it has been a big problem for me.
heat361 said:
I had sort of the same problem, try uninstalling the driver in device manager, then unplug and replug your USB. Then when you plugged in the USB go to device manager and right click on the device and click scan for hardware changes. See if that works.
I'm not sure if this is a problem caused by windows update or the new updated SDK, but it has been a big problem for me.
Click to expand...
Click to collapse
Thanks for the quick reply.
I tried your suggestion but it did not solve the problem. After re-plugging the USB, Windows listed the device as "Nexus 4" and did not find any drivers for it. I manually installed the Naked Drivers (proven to work on my laptop and desktop) but still facing the same problem
I really do not want to reinstall Windows!
Thanks.
akashi said:
Thanks for the quick reply.
I tried your suggestion but it did not solve the problem. After re-plugging the USB, Windows listed the device as "Nexus 4" and did not find any drivers for it. I manually installed the Naked Drivers (proven to work on my laptop and desktop) but still facing the same problem
I really do not want to reinstall Windows!
Thanks.
Click to expand...
Click to collapse
OK try right clicking on the the device in device manager and choose update driver, then Browse my computer, then let me pick From a list of devices. After choose have disk on and find the file where your USB drivers are and click next. It may prompt you that windows can't verify the publisher Just click install this driver software anyway.
See if this works.
heat361 said:
OK try right clicking on the the device in device manager and choose update driver, then Browse my computer, then let me pick From a list of devices. After choose have disk on and find the file where your USB drivers are and click next. It may prompt you that windows can't verify the publisher Just click install this driver software anyway.
See if this works.
Click to expand...
Click to collapse
I have tried installing the drivers from the latest SDK and also the "Naked Drivers" found here: http://forum.xda-developers.com/showthread.php?t=1996051
Still have the problem.
akashi said:
I have tried installing the drivers from the latest SDK and also the "Naked Drivers" found here: http://forum.xda-developers.com/showthread.php?t=1996051
Still have the problem.
Click to expand...
Click to collapse
Try pointing the path to the Google drivers in the android-sdk in device manager and not the naked drivers.
akashi said:
I have tried installing the drivers from the latest SDK and also the "Naked Drivers" found here: http://forum.xda-developers.com/showthread.php?t=1996051
Still have the problem.
Click to expand...
Click to collapse
This is what I did and waited for the PC to install the adb drivers.
I plugged the phone in and with the USB plugged in turned it off while holding the volume up and down keys. This made my nexus 4 go into download mode and the PC automatically installed the adb drivers. After I just unplugged and held the power button to restart the device hope this helped.
Sent from my Nexus 4 using xda premium
akashi said:
Thanks for the quick reply.
I tried your suggestion but it did not solve the problem. After re-plugging the USB, Windows listed the device as "Nexus 4" and did not find any drivers for it. I manually installed the Naked Drivers (proven to work on my laptop and desktop) but still facing the same problem
Thanks.
Click to expand...
Click to collapse
When you uninstalled what's there now, you did make sure to check the box that will remove the old drivers from your PC?
Just in case, HERE is another source for the drivers.
dinhume echoes
Thanks to everyone for their help.
Just to confirm I have already tried:
Uninstalling the ADB driver via Device Manager and selecting "Delete the driver software for this device" and rebooting.
After reboot, Windows could not locate any drivers and I manually selected the drivers found inside the SDK (08/27/2012,7.0.0000)
The device shows up on Device Manager as working but does not work with adb commands. However, fastboot commands work!
I tried the above with the Naked Driver and had the exact result.
If I boot into the bootloader, I am able to run fastboot commands perfectly!
I have already ruled out my USB port as it works perfectly on VMware.
I am thinking my Windows 7 is messed up somehow and re-installation is looking like the only solution :crying:
akashi said:
Thanks to everyone for their help.
Just to confirm I have already tried:
Uninstalling the ADB driver via Device Manager and selecting "Delete the driver software for this device" and rebooting.
After reboot, Windows could not locate any drivers and I manually selected the drivers found inside the SDK (08/27/2012,7.0.0000)
The device shows up on Device Manager as working but does not work with adb commands. However, fastboot commands work!
I tried the above with the Naked Driver and had the exact result.
If I boot into the bootloader, I am able to run fastboot commands perfectly!
I have already ruled out my USB port as it works perfectly on VMware.
I am thinking my Windows 7 is messed up somehow and re-installation is looking like the only solution :crying:
Click to expand...
Click to collapse
4.2.2 requires updated adb and fastboot. It looks like you have an older version.
Click on the ota help desk link in my signature. The new version is attached to the first post. Replace the old adb and fastboot files with the new ones. Then try again.
Sent from my Nexus 4 using xda premium
El Daddy said:
4.2.2 requires updated adb and fastboot. It looks like you have an older version.
Click on the ota help desk link in my signature. The new version is attached to the first post. Replace the old adb and fastboot files with the new ones. Then try again.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Thanks. I tried version 16.01 and still have this problem.
The problem is whenever I uninstall/install the ADB driver or disconnect/reconnect the USB, **ONLY** the "Nexus 4" appears on the Device Manager which I manually install the ADB drivers to. There is not a second "Nexus 4" on the Device Manager for the MTP or PTP.
On my laptop when I remove all drivers and reconnect the USB cable, I always see 2 "Nexus 4" listed on Device Manager. One for the ADB interface and the other for the MTP or PTP.
Please help!
Any ideas please?
Any Solution to ADB connection problems?
Hi was there any solution to this, as I seem to have the same issue.
I have tried different drivers and MTP & PPP modes as well as loading the PDAnet drivers and software.
Each time now I take care to remove all the drivers and also delete the drivers in all modes (Android running and Bootloader running)!
MTP & PPP load different copies of the drivers.
I can get either "Nexus 4" showing up in the device driver or "Google ADB Interface" or Android ADB interface" according to the driver loaded.
I can see the device when Android is running ie "ABD Devices" gives me the serial number and connected, then I can send an ADB command "adb Reboot-bootloader" the Nexus then reboots into the bootloader screen, the device driver changes to the bootloader driver (installs if not installed) however then I loose connection to the Nexus phone! "ADB Devices" returns none connected.:fingers-crossed:
I also tried unplugging and plugging back in the phone in bootloader mode but do not get adb to see the handset or it to react to commands.
I'm just about ready to try a toolkit to see if I can get past this roadblock!!!
Current computer is Win7-x64
This weekend I will try on a different computer.....Win8-X64
All comments appreciated
That's because you cant use adb when in boot loader. You use fastboot
Sent from my Nexus 4 using xda app-developers app
I have same problem on my work laptop DELL when my custom desktop machine works just fine with both Nexus 4 and 7. :/
My tablet is in developer mode, USB data bugging is clicked on. In storage, MTP is clicked on. Using the latest Android SDK along with the latest Google Win USB drivers (also different cables, different ports, uninstalled and reinstalled all drivers and software, turned on and off debug, debug authorization.. Just about everything I can think of.) Also, no, not rooted, fully stock. Been searching for a few days for this problem that occurs while trying to upgrade to Kit Kat 4.4 from JWR66Y 4.3 on my nexus 10.
Plug in my n10 normally and WIN7 will see it in the device manager as Android Device, Android Composite ADB Interface, Hardware Ids =
USB\VID_18D1&PID_4EE2&REV_0226&MI_01
USB\VID_18D1&PID_4EE2&MI_01
Boot the n10 into recovery and the adb sideload, the n10 shows everything correctly and waits for the adb sideload file. CONNECT THE USB cable and Win7 does not recognize the device. Tries to find a driver for 'other devices, nexus 10' but eventually returns with no driver found. Tried installing from specific directories (new google usb driver download), letting it search windows update evewn search my entire hd. It cannot locate a driver. Device manager shows an entirely different Hardware Id for 'other devices, Nexus 10' =
HARDWARE IDS (OTHER DEVICES, NEXUS 10)
USB\VID_18D1&PID_D001&REV_0226
USB\VID_18D1&PID_D001
I did a search with this information and found others had this ID/problem with their Nexus 7 during the Jelley Bean upgrade!
http://blog.dantup.com/2012/10/fixing-adb-device-not-found-with-nexus-7-in-recovery-mode/
There is no Nexus 10 in this file, but the second line of 'google nexus (generic)' list the ID that I have when booting normally.
%CompositeAdbInterface% = USB_Install, USB\VID_18D1&PID_4EE2&MI_01
I assume that if I replace this number with the ID I see in adb sideload mode (USB\VID_18D1&PID_D001) I should be able to install the correct USB and ADB drivers as others did on their n7 (shown in that link)?
My problem is identical to tbe description on that link, but I am guessing at the fix for the n10. This sounds like the solution to me, but I am also worried if it could be a sign of a bigger broblem or might brick my nexus. So any help would be appreciated!
Thanks all!
Ed
I tried changing the ID initially as well but then adb throws errors about the ini file not being verified. In the end I installed these to get the adb drivers properly installed: http://koush.com/post/universal-adb-driver
After that Windows finally properly recognised my N10 (and the command adb devices also showed it could see the device) and I was able to sideload kitkat.
Duplicate deleted
KiraYahiroz said:
I tried changing the ID initially as well but then adb throws errors about the ini file not being verified. In the end I installed these to get the adb drivers properly installed: http://koush.com/post/universal-adb-driver
After that Windows finally properly recognised my N10 (and the command adb devices also showed it could see the device) and I was able to sideload kitkat.
Click to expand...
Click to collapse
Wow, I hope someone finds this thread and it saves them the headaches and searches I have been through. Worked just like you said, installed this adb usb driver and it picked it right up. I wonder why google couldn't get the google driver to read their own nexus 10 tablet!
Now running Kitkat 4.4 with no data loss, thanks to you Kira!
Thank you!
Ed
KiraYahiroz said:
I tried changing the ID initially as well but then adb throws errors about the ini file not being verified. In the end I installed these to get the adb drivers properly installed: http://koush.com/post/universal-adb-driver
After that Windows finally properly recognised my N10 (and the command adb devices also showed it could see the device) and I was able to sideload kitkat.
Click to expand...
Click to collapse
Thank you, been banging my head around to try and find a fix, worked like a charm for sideloading KitKat.
cheers
Oh my god, pushing this thread because I almost needed 6 hours to root my Nexus 10 with other ADB drivers but this one worked!
Hello. Im new to the Nexus 10. I downloaded skipsoft Android toolkit, installed adb drivers in the package and rooted the Nexus and installed recovery..it was easy using the toolkit. So the ADB drivers must have worked- at least in the environment it is used in to do these things. But these drivers dont work to transfer files between the nexus and the computer running winxp. I have USB debugging and PTP, have tried every other dirver package that has been mentioned on all available forums, have tried different usb ports, different cables etc. n my computer the device is recognised as a Nexus 10 but clicking on it gives a blank page, so cannot see the Nexux files. WTF this is driving me mad. Any ideas?
Re
Hi Ghosta,
Are you using a USB 3 port? as i have had many strange issues with these the ports. The issue is caused by one of the intel drivers cant remember exactly which way but there is no easy way to fix this. If this is your issues i would try and find if you have a USB 2.1 port you can use or the Esata ports on laptops tend to be usb 2.1 inside...even though they dont look like it haha
Hope this helps
ghosta12 said:
Hello. Im new to the Nexus 10. I downloaded skipsoft Android toolkit, installed adb drivers in the package and rooted the Nexus and installed recovery..it was easy using the toolkit. So the ADB drivers must have worked- at least in the environment it is used in to do these things. But these drivers dont work to transfer files between the nexus and the computer running winxp. I have USB debugging and PTP, have tried every other dirver package that has been mentioned on all available forums, have tried different usb ports, different cables etc. n my computer the device is recognised as a Nexus 10 but clicking on it gives a blank page, so cannot see the Nexux files. WTF this is driving me mad. Any ideas?
Click to expand...
Click to collapse
What does Device Manager show? Device name, its Properties and exclamation mark?
You do know that if your device has a "password" then you must be logged in to see its contents.
peterk-1 said:
What does Device Manager show? Device name, its Properties and exclamation mark?
You do know that if your device has a "password" then you must be logged in to see its contents.
Click to expand...
Click to collapse
Thanks for the replies and suggestions. All shows up OK in device manager, the device is not password protected, and the laptop has usb2 ports. I had another try today, after connecting the nexus it shows up in my computer as a camera, labelled nexus 10, with the camera icon. When I click on the icon it opens a special folder, must be a camera folder and the camera and scanner wizard starts. After a while it detects the photos on the nexus ( I have loaded a lot on it via USB otg using flash drive ), but thumbnails of the photos are not downloaded as I usually see when I connect a camera. The wizard downloads photos back to the computer, but each photo is about 18 kB instead of the 2 mb they originally were. So it appears a connection is happening, but a very strange one. I don't like to be beaten on problems like this one, but searching the net has not given me any answers, and I don't understand the android system well enough to know what to try next.
I think your device is working. If you connect it up as it now is and then go into Settings > Storage and tap the top RH corner menu you get the USB Computer Connection and select that and change it to MTP you should find it is now visible in My Computer or after auto install of the driver it will be visible. I'm brain dead - you said you had a PTP connection!
peterk-1 said:
I think your device is working. If you connect it up as it now is and then go into Settings > Storage and tap the top RH corner menu you get the USB Computer Connection and select that and change it to MTP you should find it is now visible in My Computer or after auto install of the driver it will be visible. I'm brain dead - you said you had a PTP connection!
Click to expand...
Click to collapse
No PTP conection or MTP connection either. The Nexus also shows up in Device Manger under Imaging Devices when USB deugging is on, which is causing the camera and scanner wizard to start, although it doesnt work properly. When i disable it nothing happens at all. No idea where to go from here.
There is or was an issue with XP see http://forum.xda-developers.com/showthread.php?t=2305943
peterk-1 said:
There is or was an issue with XP see http://forum.xda-developers.com/showthread.php?t=2305943
Click to expand...
Click to collapse
Thanks for the suggestion, I had already tried that but I did it again just to make sure. It did not work for me.
Have you tried following the driver install guide from Wug's toolkit? I've never used Skipsoft's but if it doesn't have you delete old drivers properly it's possible there's some old or corrupted driver sticking around from all the installs you've done. If you follow Wug's guide exactly you should end up with the only the correct drivers installed. Also, what ROM and kernel are you using? It's possible the issue is there.
capnkrunch said:
Have you tried following the driver install guide from Wug's toolkit? I've never used Skipsoft's but if it doesn't have you delete old drivers properly it's possible there's some old or corrupted driver sticking around from all the installs you've done. If you follow Wug's guide exactly you should end up with the only the correct drivers installed. Also, what ROM and kernel are you using? It's possible the issue is there.
Click to expand...
Click to collapse
I used a program called usbdeview to uninstall every USB driver with an "android" or "adb" description which should have cleaned up my drivers? Then after reinstalling drivers I tried again no difference. I ran android-tools and can push and pull files to and from the computer and nexus, (from command line) so I believe I have eliminated hardware problems and software problems on the nexus. This leaves the computer, which works perfectly with my other android devices running 4.1.1.
Just in case this helps. In usbdeview I have 5 nexus 10 entries. They all have the vendor id of Google 18d1 and a unique Product ID . Which driver connects is related to the device settings:
PID Device settings
4ee1 MTP
4ee2 MTP + USB debugging
4ee5 PTP
4ee6 PTP + USB debugging
d002 USB debugging
With the device connected I can change settings and see the change in connected driver in USBDeview.
peterk-1 said:
Just in case this helps. In usbdeview I have 5 nexus 10 entries. They all have the vendor id of Google 18d1 and a unique Product ID . Which driver connects is related to the device settings:
PID Device settings
4ee1 MTP
4ee2 MTP + USB debugging
4ee5 PTP
4ee6 PTP + USB debugging
d002 USB debugging
With the device connected I can change settings and see the change in connected driver in USBDeview.
Click to expand...
Click to collapse
This info does provide me with some way forward. With USB , when connected ptp I have a nexus 10 USB composite device and a nexus 10 digital still camera connected with the green light in USB deview, and also a blank device name, connected, description android composite device with a purple light. I'm guessing purple means not working. But changing drivers does nothing to change the purple light. Switching to mpt gives an additional blank name Google nexus adb interface also with purple light shown as connected. All connected devices show vendor 18d1. Drivers tried 1) clockworkmod (supplied with skipsoft); 2) naked drivers 3) Google drivers. Any clues what to try next?
2 things to check. I just tried running usbdeview from Wug's toolkit. It was v2.0 and wasn't the same as the version I have installed v2.3 - and there have been a significant number of changes. If you have XP pro x64 then you must use the x64 version of usbdeview - again I think Wug's may only ship with 32 bit usbdeview http://www.nirsoft.net/utils/usb_devices_view.html You will also find an explanation of the coloured radio buttons.
If you find you need to update usbdeview then I would suggest you uninstall the device drivers (instructions in Wug's toolkit?) then new drivers from http://developer.android.com/sdk/win-usb.html#top and follow the linked install instructions.
peterk-1 said:
2 things to check. I just tried running usbdeview from Wug's toolkit. It was v2.0 and wasn't the same as the version I have installed v2.3 - and there have been a significant number of changes. If you have XP pro x64 then you must use the x64 version of usbdeview - again I think Wug's may only ship with 32 bit usbdeview http://www.nirsoft.net/utils/usb_devices_view.html You will also find an explanation of the coloured radio buttons.
If you find you need to update usbdeview then I would suggest you uninstall the device drivers (instructions in Wug's toolkit?) then new drivers from http://developer.android.com/sdk/win-usb.html#top and follow the linked install instructions.
Click to expand...
Click to collapse
I gave up completely on this, and connect via wifi using ES file explorer. I bought my wife a new tablet an Acer Aconia A1-830 and it has the same problems, impossible to connect via ADB, with exactly the same symptoms. Yet our phones connect via ADB without a problem, but both are Androild 4.1 or earlier and the tablets 4.2 or younger. Obviously an Android generated problem that arose when 4.2 was released and on which has no fix.