After enabling USB debugging on my Nexus 7, I still can't get "adb devices" to list my Nexus 7. I also tried switching its USB connection type from "media" to "camera", to no effect. I have Windows 7; I see a "Nexus" device under Other Devices in my device manager, but when I try to install the Google USB drivers from the Android SDK, Windows refuses to take it.
This is going to make development difficult Anyone know where I can find working USB drivers for Windows 7?
beandog said:
After enabling USB debugging on my Nexus 7, I still can't get "adb devices" to list my Nexus 7. I also tried switching its USB connection type from "media" to "camera", to no effect. I have Windows 7; I see a "Nexus" device under Other Devices in my device manager, but when I try to install the Google USB drivers from the Android SDK, Windows refuses to take it.
This is going to make development difficult Anyone know where I can find working USB drivers for Windows 7?
Click to expand...
Click to collapse
If you have updated the drivers from the SDK, then your problem is probably coming from the cable.
PS: Try not to use an extension cable
When I have had this problem in the past I have found that installing PDA net solves it.
Sent from my Galaxy Nexus using Tapatalk 2
download a sync software,for example,chinese use 360 mobile assistant,it will help you to connected with PC
Sent from my SHW-M190S using xda premium
i got the problem too,just install 360 mobile assistant ,it worked.but i dont know ,any mobile assistant
used in your city？
Sent from my SHW-M190S using xda premium
You may try to use device manager to solve the issue.:
Firstly please connect your Nexus 7 to you computer using the USB cable
included in the box.
Then on the tablet,
choose "Settings" -> "Storage" -> open the menu -> choose "USB computer connection" -> choose "MTP" or "PTP".
On your computer,
1. Control Panel -> Hardare and Sound -> View devices and printers
2. Click on Nexus.
3. Click on "Hardware" tab
4. Click on "Properties"
5. Click on "Change settings"
6. Click on "Driver" tab
7. Click on "Update drivers".
I'd suggest that you repeat these steps for both "MTP" and "PTP" connection types mentioned above.
Then on your computer, run "adb devices", the Nexus 7 would be listed in the
output of the adb command.
Enjoy.
Works with PTP mode - MTP mode doesn't
just for future reference...
By default it uses the MTP mode for USB. ADB is not working in this mode, even after i follow all the steps in above post.
Change it to use PTP (Camera mode), and ADB works !! go figure.
driving me crazy too.
First, windows did not recognize the thing in AdB mode. I managed to get around that with PDA net. But in cmd mode running "fastboot oem unlock" it just sits there saying "waiting for device". Also switched to both usb modes under "storage" as well as tried all usb ports on my pc (running Win 7 64bit). Using original cable.
Any other clues on what to do next?
bytecollektr said:
driving me crazy too.
First, windows did not recognize the thing in AdB mode. I managed to get around that with PDA net. But in cmd mode running "fastboot oem unlock" it just sits there saying "waiting for device". Also switched to both usb modes under "storage" as well as tried all usb ports on my pc (running Win 7 64bit). Using original cable.
Any other clues on what to do next?
Click to expand...
Click to collapse
ADB and fastboot may have two different drivers, this is the case with most other devices.
Anywho here's a link to the all inclusive driver bundle. Drivers was one of the reasons I only use a linux distro these days.
Unlawful said:
ADB and fastboot have two different drivers.
Anywho here's a link to the all inclusive driver bundle. Drivers was one of the reasons I only use a linux distro these days.
Click to expand...
Click to collapse
Still nothing. Deleted the drivers, and it obviously installed the new ones, since the name under the "device manager" changed. I go to the Android sdk and it still says waiting for device. Is there different versions of fastboot? Maybe its the wrong command? (fastboot oem unlock)
reddweb said:
just for future reference...
By default it uses the MTP mode for USB. ADB is not working in this mode, even after i follow all the steps in above post.
Change it to use PTP (Camera mode), and ADB works !! go figure.
Click to expand...
Click to collapse
This is how i got my ADB drivers to actuallly work right!! listen to this guy.
Nexcellent said:
This is how i got my ADB drivers to actuallly work right!! listen to this guy.
Click to expand...
Click to collapse
I have it in that mode, and it does not do anything, even with the new drivers.
bytecollektr said:
I have it in that mode, and it does not do anything, even with the new drivers.
Click to expand...
Click to collapse
Oh and fastboot is not available during normal operations and it has to be booted into the bootloader to use fastboot. Try using adb reboot bootloader and then when it restarts fastboot oem unlock.
I'm in the exact same situation
I'm having the same problem. I'm not exactly sure how to use the Naked Drivers pack. Can someone advise?
Easy as ADB...
Use the step by step instructions in the Nexus Root Toolkit found here;
http://forum.xda-developers.com/showthread.php?t=1766475
Hope that helps,
-CC
Set it to ptp mode, install updated sdk, and you will find proper adb driver in extras/google/usb-driver directory. After those steps adb started to work in my case' no need for third party downloads.
Sent from my Nexus 7 using xda app-developers app
I've been having the same issues with all of the new android devices I've tried to use adb on my computer for. I as able to make them work by manually installing the drivers in device manager. When you choose browse for drivers manually you can look through pre installed drivers and select adb interface and manually choose the drivers for adb and fast boot. Only issue I have is that it won't give adb root access and says rot is not available in production builds. Not sue if that's related or not.
Sent from my Nexus 7 using xda app-developers app
Windows 7 - Nexus 7 ADB Recognition
For me, like others, choosing either MTP or PTP from the Nexus 7's USB computer connection options didn't solve the issue. Updated to the latest version of the Android SDK Tools within Eclipse [version 20.0.1], and even uninstalled and re-installed the Google USB Driver [Revision 6] within the Android SDK manager, but no luck.
What ended up clearing the issue for me was to go to Computer Management, find the Nexus device with the question mark next to it, update the driver by browsing a location on the computer, browse to the location on your computer where you saved the Android SDK [the one with the following directories: add-ons, docs, extras, platforms, platform-tools, etc], and choose that very folder containing those folders I mentioned. It should search for a while then ask you whether or not to install some Asus/Google driver.
After installing that driver, my N7 was recognized by the "adb devices" command.
NOTE: Turns out when I updated the driver, my N7 was in PTP mode, and when I switched it to MTP mode, it was no longer recognized under adb devices. adb kill-server then adb start-server should get it recognized again when you switch between MTP and PTP.
Hope this works for all of you out there, like me, who really didn't want to take the 3rd party software route to overcome this problem.
Cheers.
ADB driver
Try to root toolkit from Wugfresh
http://forum.xda-developers.com/showthread.php?t=1766475
There is a very complete and usable guide to install ADB driver for most version of windows (XP->win 7).
You don't have to unlock or root; just use the interactive guide for driver install.
Good luck
bytecollektr said:
Still nothing. Deleted the drivers, and it obviously installed the new ones, since the name under the "device manager" changed. I go to the Android sdk and it still says waiting for device. Is there different versions of fastboot? Maybe its the wrong command? (fastboot oem unlock)
Click to expand...
Click to collapse
rootblock said:
For me, like others, choosing either MTP or PTP from the Nexus 7's USB computer connection options didn't solve the issue. Updated to the latest version of the Android SDK Tools within Eclipse [version 20.0.1], and even uninstalled and re-installed the Google USB Driver [Revision 6] within the Android SDK manager, but no luck.
What ended up clearing the issue for me was to go to Computer Management, find the Nexus device with the question mark next to it, update the driver by browsing a location on the computer, browse to the location on your computer where you saved the Android SDK [the one with the following directories: add-ons, docs, extras, platforms, platform-tools, etc], and choose that very folder containing those folders I mentioned. It should search for a while then ask you whether or not to install some Asus/Google driver.
After installing that driver, my N7 was recognized by the "adb devices" command.
NOTE: Turns out when I updated the driver, my N7 was in PTP mode, and when I switched it to MTP mode, it was no longer recognized under adb devices. adb kill-server then adb start-server should get it recognized again when you switch between MTP and PTP.
Hope this works for all of you out there, like me, who really didn't want to take the 3rd party software route to overcome this problem.
Cheers.
Click to expand...
Click to collapse
i'm having the issue with the mtp not being recognized in adb. can you be more specific in the adb kill-server and adb start-server.
Related
I'm using the Asus Google Nexus ToolKit V3.8.2 (donated version).
With my first N7 I was able to unlock and root.
Now I exchanged it against the N7 3G (HSPA+). I was able to unlock the device and able to install the bootloader 3.34. But root does not work. I think it is because ADB does not recognize the tablet.
What happens:
1.) the start screen of the ToolKit does not show the serial in the adb device list (If I restart the tablet in fastmode it list the serial in fastmode device list)
2.) if I start the Root and the ToolKit wants to reboot in Fastboot Mode it says "Waiting for adb Mode".
3.) If I restart on my own in Fastboot Mode and start the Root procedure then it reboots the device and says "Procedure will continue in 20 seconds Waiting for USB debugging to be enabled". It does not help to re-activate the usb debugging mode and it doesn't help to re-connect the usb cable.
4.) I started cmd and changed to the "Google Nexus 7 ToolKit" folder to call "adb-toolkit devices". But it does not show any device. adb-toolkit kill-server and start-server doesn't help. usb reconnect doesn't help.
P.S. As I'm a new member I'm not able to post inside the official support thread, sorry.
It could be a driver issue on the pc..
try this
download a pc app called usbdview . Do a google search to find it..
Run the program on the pc without the nexus plugged in. Delete all adb/ usb devices that you do not have physically plugged into your computer.
Plug in the nexus 7 refresh the list . Delete what ever comes up for the nexus 7..
Reboot the computer WITH the nexus not connected..
Install the NEXUS DRIVERS.. plug in the nexus and the computer should find the device as if its the first time used.
Try you tool kit again...
Sometimes when adb is started and stopped if there are several versions Windows can be confused and not stop the right driver but start a older version instead VERY Common windows usb issue. This works with any USB Trouble shooting for devices not just Android...
Good LUCK ..
It's pretty obvious that you need to install the correct drivers for the Nexus 7 HSPA+.
I'm not the lowest of the low, but I am the slowest of the slow.
exglynco said:
It's pretty obvious that you need to install the correct drivers for the Nexus 7 HSPA+.
I'm not the lowest of the low, but I am the slowest of the slow.
Click to expand...
Click to collapse
The nexus drives are a One driver for all Nexus Devices... This should only be a issue if there are multiple copies of usb adb in the windows registry . The usb drivers need to be removed then re installed or will just create more conflict. Usb Is NOT SO PLUG AND PLAY as it was intended.. Sometimes just plugging a usb device from one usb port to another in some computers can cause windows to install another copy of the driver. This is mostly on systems with a usb hub then a usb 2.o hub on a different port.. and so on.
I Use my notebook with several android devices . I often have issues with
erica_renee said:
It could be a driver issue on the pc..
Click to expand...
Click to collapse
This could it be. But I found a very simple solution:
stackoverflow.com/a/11991653/318765
When the Nexus 7 is plugged in there is a persistent notification that indicates "CONNECT AS / Media Device (MTP)". In this state adb devices will not show the Nexus, or undoubtedly any other device. Not exactly obvious, but if you select the second option "Camera (PTP)" the device is available for debugging (the lesson is ignore the camera, and focus on the protocol PTP).
This choice is persistent, and I'm guessing that with a band new device it will connect as MTP until told otherwise.
Click to expand...
Click to collapse
I'm Italian, sorry for my English.
A few days ago I unlocked the bootloader via Toolkit, rooted and flashed the TWRP recovery _.
But I had hard difficulty:
After driver installed, I unlocked bootloader, enable debugging and then NOTHING!
In practice, the N7 was recognized by windows 7 64bit only in FastReboot mode ..
I tried in every way possible, deleted and reinstalled the driver 50 times, restored windows to a previous point, installed the drivers manually tried without toolkit, but how ADB just do not want to know.
For hours I was still with the bootloader unlocked but without root, until came to my rescue a friend with another notebook but same windows 7 64. Load the Toolkit, install the drivers and everything goes perfectly, I do everything in 5 minutes.
On my laptop there is always the issue driver ADB, in the future I still need my PC recognized the N7 in ADB, how can I do?
One thing that I think is not well understood is that there is no "Generic Class Driver" for ADB nor for fastboot...
... even though the very driver that works for one mode (or phone/tablet device) may be perfectly fine with a different device. The wire protocol for both fastboot and adb are extremely simplistic.
So, what that means is that if the Hardware ID used by the USB device endpoint registers on the bus with a different VendorID/ProductID, Windows will (correctly) not use a previously-installed ADB driver, or previously installed fastboot driver - even though they would probably work just fine.
Here is an example. The Nexus 7 registers the following Hardware ID when ADB debugging is turned on in the OS:
USB\VID_18D1&PID_4E42&REV_9999&MI_01
USB\VID_18D1&PID_4E42&MI_01
On the other hand, if you are using TWRP, it's adbd daemon shows up on the PC as:
USB\VID_18D1&PID_D001&REV_9999
USB\VID_18D1&PID_D001
This means that you might need to install a different driver for using the ADB with the OS, and a different driver for ADB under TWRP - even though it is exactly the same hardware on the other end of the cable! In the absence of a generic class driver for a given USB endpoint, Windows tries to match drivers in it's local (& internet) database based on this VID/PID pair.
If you have a look at the [ADB/FB/APX Driver] Universal Naked Driver 0.72 thread - and download it and have a look at it's included "android_winusb.inf" file - you will see literally hundred of different VID/PID pairs in the driver's android_winusb.inf file in the installer package, corresponding to many hundreds of phones/tablets. Same driver with hundreds of devices listed as compatible.
In the past I recall taking the Google (SDK) USB driver, and manually editing into place matching VID/PID pairs for a HTC phone into the .inf file. It worked perfectly; I probably flashed that phone hundreds if not thousands of times using the Google Driver (My PC is a Windows 7 Pro x64 machine btw).
Anyhow, I have pulled this stunt twice now - once editing the .inf file for the Google Driver, and I did it once with the Universal Naked driver too. You can choose which driver you want to start with.
If you want to give it a roll, you can start with any of those three drivers:
- Google (SDK) USB driver
- XDA "Universal Naked" driver
- Asus Nexus 7 USB Driver (Look under Download)
Note that since you are using W7 x64, make sure that you add each new entries to the .inf file twice - once in the ".NTx86" section, and duplicated again in the ".NTamd64" section. When editing .INF files, make sure to use an editor which preserves simple text file formatting - use "notepad", not "wordpad"
If you want a reference for what values to use, see the bottom end of this post. You should see exactly these same values in your Device Manager, however.
Note that if you see the device show up in the Device Manager as being correctly identified and marked as "working normally" - but it doesn't work - you should probably remove that driver and re-install from a different driver package.
This would certainly be the case for any drivers you saw associating with VID/PID pairs that look like:
VID_18D1&PID_4E40 bootloader/fastboot
VID_18D1&PID_4E41 single adb
VID_18D1&PID_4E42*&MI_01 composite adb
VID_0955&PID_7330 avx mode
VID_18D1&PID_D001 adb in TWRP (maybe CWM too, I didn't check)
That's a lot to throw at you, especially with Italian <=> English in the mix.
Feel free to ask questions.
bftb0
Hello,
I tried to follow your advice but I have not solved.
I'll explain what I did, so you can correct me.
-Uninstalled previous drivers (from device manager, control panel)
-Restart the PC
-Modified the inf file. Package Asus Nexus 7 USB driver (ntx86 and NTamd64 sections) attach screenshots
-Linked N7 (usb debugging actived)
-Found portable device in device manager, update drivers manually from the Nexus 7 Asus USB drivers
I tried to change also too XDA "Universal Naked" driver by following the same procedure.
I tried to create another account on my pc, but no ADB!
View attachment 1734997
Did you update to 4.2.2?
The is something to do with adb in that update, needing a password or something. I am not sure but if you did update you might want to check that.
Sent from my Nexus 10 using Tapatalk HD
stonebear said:
Did you update to 4.2.2?
The is something to do with adb in that update, needing a password or something. I am not sure but if you did update you might want to check that.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Use "Google USB drivers" you get after you install from here http://developer.android.com/sdk/index.html
Its drivers work with 4.2.2
I got 4.2.2. rooted with ADB working now via only this and no other method
No problem with adb in 4.2.2... I tested yesterday (no need psw too...)
stonebear said:
Did you update to 4.2.2?
The is something to do with adb in that update, needing a password or something. I am not sure but if you did update you might want to check that.
Sent from my Nexus 10 using Tapatalk HD
Click to expand...
Click to collapse
Marco16V said:
-Found portable device in device manager, update drivers manually from the Nexus 7 Asus USB drivers
Click to expand...
Click to collapse
Is this the only device which shows up in the device manager? The "Portable Device" is either the MTP or PTP endpoint - not ADB. The latter (adb) should show up elsewhere in the device manager.
You should certainly NOT be trying to install fastboot/adb driver on MTP/PTP endpoints!
I think perhaps I am not understanding because I am guessing at certain details.
Q1) Do the drivers appear to install correctly?
Q2) When you have the N7 in the corresponding mode - whether or not you observe (device manager) "working normally" or "unknown device" - do you see the following Hardware IDs showing up in the device manager?
Bootloader Fastboot Mode:
USB\VID_18D1&PID_4E40&REV_0000
USB\VID_18D1&PID_4E40
OS adb:
USB\VID_18D1&PID_4E42&REV_9999&MI_01
USB\VID_18D1&PID_4E42&MI_01
TWRP adb (Possibly also CWM adb, I haven't checked it) :
USB\VID_18D1&PID_D001&REV_9999
USB\VID_18D1&PID_D001
Q3) I presume you went through the same install sequence on your PC that succeeded on the other laptop - in the event the problem is a hardware problem, did you try a different cable or USB port on your PC?
Q4) When you remove drivers, are you requesting that the drivers be removed from the PC?
The 4.2.2 authentication issue might be an issue (although I suspect this is a adb program version issue, not a driver version issue. In any event, it wouldn't effect the behavior of adb in TWRP/CWM.
Sorry for all the questions.
bftb0 said:
Is this the only device which shows up in the device manager? The "Portable Device" is either the MTP or PTP endpoint - not ADB. The latter (adb) should show up elsewhere in the device manager.
You should certainly NOT be trying to install fastboot/adb driver on MTP/PTP endpoints!
I think perhaps I am not understanding because I am guessing at certain details.
Q1) Do the drivers appear to install correctly?
Q2) When you have the N7 in the corresponding mode - whether or not you observe (device manager) "working normally" or "unknown device" - do you see the following Hardware IDs showing up in the device manager?
Bootloader Fastboot Mode:
USB\VID_18D1&PID_4E40&REV_0000
USB\VID_18D1&PID_4E40
OS adb:
USB\VID_18D1&PID_4E42&REV_9999&MI_01
USB\VID_18D1&PID_4E42&MI_01
TWRP adb (Possibly also CWM adb, I haven't checked it) :
USB\VID_18D1&PID_D001&REV_9999
USB\VID_18D1&PID_D001
Q3) I presume you went through the same install sequence on your PC that succeeded on the other laptop - in the event the problem is a hardware problem, did you try a different cable or USB port on your PC?
Q4) When you remove drivers, are you requesting that the drivers be removed from the PC?
The 4.2.2 authentication issue might be an issue (although I suspect this is a adb program version issue, not a driver version issue. In any event, it wouldn't effect the behavior of adb in TWRP/CWM.
Sorry for all the questions.
Click to expand...
Click to collapse
When the drivers are not installed and I connect to pc N7, is only recognized as a portable device, then later recognized as Google Nexus 7.
To install the drivers (modified as described) I click reinstall driver, then later recognized (if connected to pc in android mode, with usb debugging actived) as Android Device in another voice, ADB interface. But is not recognized by the toolkit under adb devices, and even when I try using cmd.
1-When I install the drivers. seem to be installed correctly.
2-Sorry, where can I find Hardware IDs in Device Manager? What is the difference between OS adb and TRWP adb?
3 - In other pc (with same N7, same cable, same driver, same toolkit) I had no problems. I tried to change only the USB port.
4-I uninstall the driver from device manager (uninstall voice) and ask to be also uninstalled software from the PC
In some Italian forum, I found people with the same problems.
Solved by formatting PC. I would not do that ...
Thanks for your help, sorry for my English and my limited skills
AW: No ADB mode, driver issue?
Try to download the latest Android SDK and try to connect with that adb version. Adb with version < 1.0.31 will not work correctly with Android 4.2.2.
Sent from my Nexus 7 using xda app-developers app
AndDiSa said:
Try to download the latest Android SDK and try to connect with that adb version. Adb with version < 1.0.31 will not work correctly with Android 4.2.2.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I tried sdk but I have not solved.
I use Android 4.2.1. I'm having problems with the update! I can not update OTA (N7 stuck under the impending reboot). I also tried to download the zip file to upgrade the memory and flash it from recovery but the installation is not completed (error 7 build.prop).
I also tried to flash the factory image 4.2.1 (keeping userdata) and start again. Nothing, same mistakes!
Too many problems!
Marco16V said:
2-Sorry, where can I find Hardware IDs in Device Manager?
Click to expand...
Click to collapse
(Note I attached some pictures below)
From the Device Manager:
- Select the Device in question by right-clicking. Choose "Properties"
- A window with three tabs will appear: General, Driver, and Details. Select Details
- The "Property" combo-box-selector has 20 or 30 items - the 2nd one in the list is Hardware Ids. I attached two pictures from Win7-Pro-x64 (below)
But note as I said before: You should NOT be seeing the ADB endpoint under "Portable Devices" - if ADB Debugging is turned on in the OS, you should see it under "Android Phone" or something similar. In any event, the hardware Ids will identify it exactly
Marco16V said:
What is the difference between OS adb and TRWP adb?
Click to expand...
Click to collapse
Well, as far as the behavior of the USB driver on the PC, almost nothing. Unfortunately - for better or for worse - both TeamWin (TWRP) and CWM authors put their ADB interface on the bus with the VID/PID pair of USB\VID_18D1&PID_D001, whereas the OS puts all its USB interfaces on 18D1/4Exx.
So, even if you get a driver installed for the OS "adb" mode (say by using the Google SDK USB driver or the Asus Nexus 7 driver), it won't work for the custom recovery... unless you fix up the driver installer package to have the matching VID/PID pairs (18D1/D001) in the .INF file for that driver.
I think folks find this confusing - they think, "wait, I have a ADB driver installed" - why does it not work?
OK, there are a couple more things to try (at least before I give up). Roughly they try to answer these questions:
Q1) Is this a toolkit issue, or a driver issue?
Q2) Is it a prior driver you installed that you are not observing that is causing the problem?
The first one (Q1) is easiest to diagnose: when your PC Device Manager indicates that a device is "working normally" - AND THE VID/PID ID MATCHES WHAT YOU SHOULD EXPECT FOR THE MODE THE TABLET IS IN (regular OS, recovery boot, fastboot mode), can you communicate with the device from the Windows command line? e.g.,
Code:
C:\foo> cd C:\blahblah\sdk-platform-tools-directory
C:\blahblah\sdk-platform-tools-directory> fastboot devices
or
C:\blahblah\sdk-platform-tools-directory> adb devices
If you can communicate with the tablet from the command line - your device ID will be printed by the above commands, then you don't have a driver problem at all - there is something screwy about the way your toolkit is installed.
OK, Q2 -
When Windows installs a driver, it caches it into a kind of database. I suppose it is possible that a prior driver installation might be causing trouble. You can observe - from the device manager - all the drivers that are installed - even for devices that are not currently connected to your computer.
This is done by setting the "devmgr_show_nonpresent_devices=1" environment variable. It can be done semi-permanently this way, or for a single invocation of the device manager this way..
See the third image attached (devmgr-all-devices.jpg ) - it is my computer in that "show all devices" mode. See all that rubbish in there? It's from other Android devices (HTC, Samsung, etc).
You can walk through each one of those - even the devices that are not currently attached - and inspect the VID/PID pair to see if they happen to match the values that you are expecting to see for the different operating modes on the Nexus 7. I'll leave it up to you whether you want to do this or not; it is a bit tedious. Just don't start deleting drivers willy-nilly if you don't know what they are associated with.
Marco16V said:
Thanks for your help, sorry for my English and my limited skills
Click to expand...
Click to collapse
I am understanding everything you are saying - and your english is far better than my italian
good luck!
I am trying to connect my Nexus 4 to my PC and use the ADB commands. I have the following problems:
ADB driver is installed and "USB Debugging" turned on the Nexus 4. Device shows up on Device Manager, however "adb devices" does not list the device and unable to communicate with the attached device.
The Nexus drive, regardless of MTP or PTP disappears from Windows Explorer when "USB Debugging" is turned on, Turning off "USB Debugging" brings back the drive.
USBView shows the device with a RED light, but it appears working on Device Manager.
I do not have this problem with my other laptop and desktop.
Using Windows 7 x64 Ultimate and Nexus 4 - Stock 4.2.2
Any help would be appreciated. Thanks.
akashi said:
I am trying to connect my Nexus 4 to my PC and use the ADB commands. I have the following problems:
ADB driver is installed and "USB Debugging" turned on the Nexus 4. Device shows up on Device Manager, however "adb devices" does not list the device and unable to communicate with the attached device.
The Nexus drive, regardless of MTP or PTP disappears from Windows Explorer when "USB Debugging" is turned on, Turning off "USB Debugging" brings back the drive.
USBView shows the device with a RED light, but it appears working on Device Manager.
I do not have this problem with my other laptop and desktop.
Using Windows 7 x64 Ultimate and Nexus 4 - Stock 4.2.2
Any help would be appreciated. Thanks.
Click to expand...
Click to collapse
I had sort of the same problem, try uninstalling the driver in device manager, then unplug and replug your USB. Then when you plugged in the USB go to device manager and right click on the device and click scan for hardware changes. See if that works.
I'm not sure if this is a problem caused by windows update or the new updated SDK, but it has been a big problem for me.
heat361 said:
I had sort of the same problem, try uninstalling the driver in device manager, then unplug and replug your USB. Then when you plugged in the USB go to device manager and right click on the device and click scan for hardware changes. See if that works.
I'm not sure if this is a problem caused by windows update or the new updated SDK, but it has been a big problem for me.
Click to expand...
Click to collapse
Thanks for the quick reply.
I tried your suggestion but it did not solve the problem. After re-plugging the USB, Windows listed the device as "Nexus 4" and did not find any drivers for it. I manually installed the Naked Drivers (proven to work on my laptop and desktop) but still facing the same problem
I really do not want to reinstall Windows!
Thanks.
akashi said:
Thanks for the quick reply.
I tried your suggestion but it did not solve the problem. After re-plugging the USB, Windows listed the device as "Nexus 4" and did not find any drivers for it. I manually installed the Naked Drivers (proven to work on my laptop and desktop) but still facing the same problem
I really do not want to reinstall Windows!
Thanks.
Click to expand...
Click to collapse
OK try right clicking on the the device in device manager and choose update driver, then Browse my computer, then let me pick From a list of devices. After choose have disk on and find the file where your USB drivers are and click next. It may prompt you that windows can't verify the publisher Just click install this driver software anyway.
See if this works.
heat361 said:
OK try right clicking on the the device in device manager and choose update driver, then Browse my computer, then let me pick From a list of devices. After choose have disk on and find the file where your USB drivers are and click next. It may prompt you that windows can't verify the publisher Just click install this driver software anyway.
See if this works.
Click to expand...
Click to collapse
I have tried installing the drivers from the latest SDK and also the "Naked Drivers" found here: http://forum.xda-developers.com/showthread.php?t=1996051
Still have the problem.
akashi said:
I have tried installing the drivers from the latest SDK and also the "Naked Drivers" found here: http://forum.xda-developers.com/showthread.php?t=1996051
Still have the problem.
Click to expand...
Click to collapse
Try pointing the path to the Google drivers in the android-sdk in device manager and not the naked drivers.
akashi said:
I have tried installing the drivers from the latest SDK and also the "Naked Drivers" found here: http://forum.xda-developers.com/showthread.php?t=1996051
Still have the problem.
Click to expand...
Click to collapse
This is what I did and waited for the PC to install the adb drivers.
I plugged the phone in and with the USB plugged in turned it off while holding the volume up and down keys. This made my nexus 4 go into download mode and the PC automatically installed the adb drivers. After I just unplugged and held the power button to restart the device hope this helped.
Sent from my Nexus 4 using xda premium
akashi said:
Thanks for the quick reply.
I tried your suggestion but it did not solve the problem. After re-plugging the USB, Windows listed the device as "Nexus 4" and did not find any drivers for it. I manually installed the Naked Drivers (proven to work on my laptop and desktop) but still facing the same problem
Thanks.
Click to expand...
Click to collapse
When you uninstalled what's there now, you did make sure to check the box that will remove the old drivers from your PC?
Just in case, HERE is another source for the drivers.
dinhume echoes
Thanks to everyone for their help.
Just to confirm I have already tried:
Uninstalling the ADB driver via Device Manager and selecting "Delete the driver software for this device" and rebooting.
After reboot, Windows could not locate any drivers and I manually selected the drivers found inside the SDK (08/27/2012,7.0.0000)
The device shows up on Device Manager as working but does not work with adb commands. However, fastboot commands work!
I tried the above with the Naked Driver and had the exact result.
If I boot into the bootloader, I am able to run fastboot commands perfectly!
I have already ruled out my USB port as it works perfectly on VMware.
I am thinking my Windows 7 is messed up somehow and re-installation is looking like the only solution :crying:
akashi said:
Thanks to everyone for their help.
Just to confirm I have already tried:
Uninstalling the ADB driver via Device Manager and selecting "Delete the driver software for this device" and rebooting.
After reboot, Windows could not locate any drivers and I manually selected the drivers found inside the SDK (08/27/2012,7.0.0000)
The device shows up on Device Manager as working but does not work with adb commands. However, fastboot commands work!
I tried the above with the Naked Driver and had the exact result.
If I boot into the bootloader, I am able to run fastboot commands perfectly!
I have already ruled out my USB port as it works perfectly on VMware.
I am thinking my Windows 7 is messed up somehow and re-installation is looking like the only solution :crying:
Click to expand...
Click to collapse
4.2.2 requires updated adb and fastboot. It looks like you have an older version.
Click on the ota help desk link in my signature. The new version is attached to the first post. Replace the old adb and fastboot files with the new ones. Then try again.
Sent from my Nexus 4 using xda premium
El Daddy said:
4.2.2 requires updated adb and fastboot. It looks like you have an older version.
Click on the ota help desk link in my signature. The new version is attached to the first post. Replace the old adb and fastboot files with the new ones. Then try again.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Thanks. I tried version 16.01 and still have this problem.
The problem is whenever I uninstall/install the ADB driver or disconnect/reconnect the USB, **ONLY** the "Nexus 4" appears on the Device Manager which I manually install the ADB drivers to. There is not a second "Nexus 4" on the Device Manager for the MTP or PTP.
On my laptop when I remove all drivers and reconnect the USB cable, I always see 2 "Nexus 4" listed on Device Manager. One for the ADB interface and the other for the MTP or PTP.
Please help!
Any ideas please?
Any Solution to ADB connection problems?
Hi was there any solution to this, as I seem to have the same issue.
I have tried different drivers and MTP & PPP modes as well as loading the PDAnet drivers and software.
Each time now I take care to remove all the drivers and also delete the drivers in all modes (Android running and Bootloader running)!
MTP & PPP load different copies of the drivers.
I can get either "Nexus 4" showing up in the device driver or "Google ADB Interface" or Android ADB interface" according to the driver loaded.
I can see the device when Android is running ie "ABD Devices" gives me the serial number and connected, then I can send an ADB command "adb Reboot-bootloader" the Nexus then reboots into the bootloader screen, the device driver changes to the bootloader driver (installs if not installed) however then I loose connection to the Nexus phone! "ADB Devices" returns none connected.:fingers-crossed:
I also tried unplugging and plugging back in the phone in bootloader mode but do not get adb to see the handset or it to react to commands.
I'm just about ready to try a toolkit to see if I can get past this roadblock!!!
Current computer is Win7-x64
This weekend I will try on a different computer.....Win8-X64
All comments appreciated
That's because you cant use adb when in boot loader. You use fastboot
Sent from my Nexus 4 using xda app-developers app
I have same problem on my work laptop DELL when my custom desktop machine works just fine with both Nexus 4 and 7. :/
I'm running Windows 7 64bit and followed the Ultimate guide to unlock and root my Nexus 4.
Everything went well but now it looks like that Windows won't recognize my phone as a device. When I plug in the phone, the auto-play window will pop out and recognize it as Nexus 4, but there is no other options. (Normally the auto-play will ask if open folder to view files or transfer photos). I can't see my phone in device manager either.
If I turn on the USB debugging mode, I can see it in device manager but still cannot see it in My Computer. Looks like Windows can't access the SD card at all.
I tried switching to the camera mode but the problem remained. Please help.
desperate bump. can anyone help?
Maybe it's a stupid advice, but have you tried change the USB port in PC?
glancer2315 said:
desperate bump. can anyone help?
Click to expand...
Click to collapse
Plug in the phone, uninstall the drivers from Device manager, then unplug, and replug.
Colourkey said:
Maybe it's a stupid advice, but have you tried change the USB port in PC?
Click to expand...
Click to collapse
yes, i did.
abaaaabbbb63 said:
Plug in the phone, uninstall the drivers from Device manager, then unplug, and replug.
Click to expand...
Click to collapse
thanks for your advice. the problem is that, without USB debugging mode on, I can't see Nexus 4 in Device manager, even though the Windows Auto-play will say Nexus 4 connected. (Nothing in My Computer either)
With USB debugging mode on, I uninstalled the driver and Windows would try installing the driver. Now it shows up as MTP device with an exclamation mark. I tried manually update the driver (direct it to the Google SDK folder and pick the android_windowsusb.inf) but it says it does not support x64. I don't think the 64 bit driver is digitally signed.
I think I had a similar problem as yours. If you deleted the drivers while on debugging mode and reconnected after and it's showing the exclamation mark of a unknown device, try restarting your computer and plugging your phone back in.
SovereigN7 said:
I think I had a similar problem as yours. If you deleted the drivers while on debugging mode and reconnected after and it's showing the exclamation mark of a unknown device, try restarting your computer and plugging your phone back in.
Click to expand...
Click to collapse
i did and it remains the same.
Is there anyway I can know all the files names of the drivers so that I can manually delete them from system folder? When I uninstalled it from the device manager, I don't see the option "Delete the driver software for this device".
I can still see it under "adb devices" list.
I think there are some conflicts in the drivers.
Now when I connect Nexus 4 (without USB debugging mode on), it will show up in device manager under Android Device.
With USB debugging, it will then show up under Portable Devices.
However, it's supposed to work the other way around. that is (no USB debugging --> portable device; with USB debugging --> Android Device).
How can i solve this?
Have you tried manually installing the drivers before plugging in the phone, vs letting windows choose the drivers it wants to install? One option you could try is installing PDA Net on your pc. It will install reliable drivers on your pc.
i also had this same problem after flashing my first custom rom on the n4, and i also run windows 7 Ultimate x64
here is the process i use for full clean installation of device
on phone
goto SETTINGS > STORAGE > (menu) USB Computer Connection
make sure Media Device (MTP) is checked
With USB Debugging On
On your PC go to device manager
there should be 2 devices (Android Phone > Android Composite ADB Interface & Portable Devices > Nexus 4) - this is on a fully working n4 so you might only have 1 of them
Right click on each of them and click uninstall
The popup box should have another check box to delete the driver also, if this is available check it then confirm (note mine only has the box for Android Phone > Android Composite ADB Interface, but if yours has it on both then check it on both)
your computer will now ask you to restart, dont do it yet
repeat previous step for the other device if you have 2 then reboot
upon rebooting it will automatically start reinstalling drivers
by expanding the selection you should see 2 devices
Nexus 4 - Successful - Ready To Use (this is your MTP connection)
Nexus 4 - Unsuccessful - No Driver Found (this is your ADB Connection)
at this point you should be able to access internal storage however ADB will not work
go back into device manager
you should now have
Portable Devices > Nexus 4
and Other Devices > Nexus 4 (with yellow exclamation mark)
right click on the Other Devices > Nexus 4 (with yellow exclamation mark)
hit Update Driver Software
click Browse my computer for driver software
click Let Me Pick Drom a List of Device Drivers On My Computer
double click Show All Devices
click Have Disk...
click Browse
navigate to the download directory for the google usb drivers (for me this was "C:\Program Files (x86)\Android\Android-SDK\Extras\Google\Usb_Driver")
double click on the android_winusb.inf file
click OK
double click "Android Composite ADB Interface"
it will then install the driver for ADB
you should now have full access to internal storage and ADB
Alex240188 said:
i also had this same problem after flashing my first custom rom on the n4, and i also run windows 7 Ultimate x64
here is the process i use for full clean installation of device
on phone
goto SETTINGS > STORAGE > (menu) USB Computer Connection
make sure Media Device (MTP) is checked
With USB Debugging On
On your PC go to device manager
there should be 2 devices (Android Phone > Android Composite ADB Interface & Portable Devices > Nexus 4) - this is on a fully working n4 so you might only have 1 of them
Right click on each of them and click uninstall
The popup box should have another check box to delete the driver also, if this is available check it then confirm (note mine only has the box for Android Phone > Android Composite ADB Interface, but if yours has it on both then check it on both)
your computer will now ask you to restart, dont do it yet
repeat previous step for the other device if you have 2 then reboot
upon rebooting it will automatically start reinstalling drivers
by expanding the selection you should see 2 devices
Nexus 4 - Successful - Ready To Use (this is your MTP connection)
Nexus 4 - Unsuccessful - No Driver Found (this is your ADB Connection)
at this point you should be able to access internal storage however ADB will not work
go back into device manager
you should now have
Portable Devices > Nexus 4
and Other Devices > Nexus 4 (with yellow exclamation mark)
right click on the Other Devices > Nexus 4 (with yellow exclamation mark)
hit Update Driver Software
click Browse my computer for driver software
click Let Me Pick Drom a List of Device Drivers On My Computer
double click Show All Devices
click Have Disk...
click Browse
navigate to the download directory for the google usb drivers (for me this was "C:\Program Files (x86)\Android\Android-SDK\Extras\Google\Usb_Driver")
double click on the android_winusb.inf file
click OK
double click "Android Composite ADB Interface"
it will then install the driver for ADB
you should now have full access to internal storage and ADB
Click to expand...
Click to collapse
thank you for your long and detailed reply.
this is what i wanted to do, but the problem is that when I uninstall them, I don't get to see the option "delete the driver software for this device". What should I? cuz every time I plug in Windosws just tries to automatically install the driver for me.
Have you tried toggling to ptp mode then back to mtp on your phone. It's odd indeed.
The fact that you can't remove the driver is because that is the mtp one which is built in to media player. Let me give this some more thought
EDIT: You said that with USB debugging disabled your device is listed under device manager as an android device
can you check and verify exactly what it is listed as? as it should be portable device
Sent from my Nexus 4 using xda app-developers app
Alex240188 said:
Have you tried toggling to ptp mode then back to mtp on your phone. It's odd indeed.
The fact that you can't remove the driver is because that is the mtp one which is built in to media player. Let me give this some more thought
EDIT: You said that with USB debugging disabled your device is listed under device manager as an android device
can you check and verify exactly what it is listed as? as it should be portable device
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
hi under android device it shows up as Android adb device
under portable device i can it now showing up as MTP USB device with exclamation mark.
glancer2315 said:
hi under android device it shows up as Android adb device
under portable device i can it now showing up as MTP USB device with exclamation mark.
Click to expand...
Click to collapse
does adb work?
i.e. adb devices
or is USB debugging turned off at this point
Also. The one with the exclamation mark. Right click and go to properties. What does it say in device status
Alex240188 said:
does adb work?
i.e. adb devices
or is USB debugging turned off at this point
Also. The one with the exclamation mark. Right click and go to properties. What does it say in device status
Click to expand...
Click to collapse
hi, adb devices works. (will list my device when usb debugging is on)
with usb debugging off, under portable device, the device status says "This device cannot start. (Code 10)". thanks.
still looking for solutions. maybe i should try uninstalling the ADB driver, but the problem is that when i uninstall the device from the device manager I don't see the option "delete the driver software for this device", any help?
glancer2315 said:
still looking for solutions. maybe i should try uninstalling the ADB driver, but the problem is that when i uninstall the device from the device manager I don't see the option "delete the driver software for this device", any help?
Click to expand...
Click to collapse
I have this same issue I'm trying to find a fix, that's how I found your thread. Alex gave very good info make sure you go back to his posts and hit his "Thanks" button, I did it on everyone one of his posts in this thread. I'm starting to think it's a hardware issue and not a software issue, I've never had this issue on any device. When I got it new running stock 4.2.2 MTP didn't work. ADB works and PTP works, just not MTP no matter what I try. I recommend you learn to use, ADB push and pull to move your files if you don't already know how to use it (To use ADB I need to check PTP for it to work and not MTP) you might need to do the same. I will keep you posted if I find a fix.
Sent from my Nexus 10 Pimpin AOKP 4Life
I'm just getting more and more confused with this.
If Adb works then you must have an Adb driver installed for the phone. However your also stating that you get no box for uninstall driver.
With USB debugging disabled you said that it appears as an android phone rather than a portable device. This should not be.
With debugging disabled what happens if you Try to uninstall in device manager
Sent from my Nexus 4 using xda app-developers app
---------- Post added at 01:54 PM ---------- Previous post was at 01:51 PM ----------
My theory still stands that you have updated the mtp driver with adb drivers. Hence why mtp doesn't work but ptp does.
The problem is getting to a position where you can uninstall the adb drivers from the mtp device and let it reinstall the proper drivers
Sent from my Nexus 4 using xda app-developers app
I plugged another Nexus 4 in, and all the drivers loaded perfectly. I then tried my Nexus 4 phone, and nothing happens. No mtp, no adb, no boot loader drivers. Its my phone. My next step is to find a zip file that I can flash via custom recovery, which will bring all the binaries and ROM back to stock. Anybody know where I can find this? I'll probably lose the custom recovery, but hopefully it will be fixed and I can flash the custom recovery again.
LG-E960
Hi, my problem is this: my phone is recognized as an ADB device but I cannot see it under adb devices.
Currently running PA RC2 3.99
Fastboot and Recovery do recognize it but ADB does not.
I have the drivers from here installed them as described in the instructions with uninstalling + deleting the old ones and rebooting.
I also have the most updated version of ADB from Android SDK.
One weird thing is that if i uninstall + delete the current drivers and try to install the ones i got from the SDK and not from the thread I mentioned then it does not install them. So maybe that is where my problem...
Any advice??
Thanks in advance.
akrabi said:
Hi, my problem is this: my phone is recognized as an ADB device but I cannot see it under adb devices.
Currently running PA RC2 3.99
Fastboot and Recovery do recognize it but ADB does not.
I have the drivers from here installed them as described in the instructions with uninstalling + deleting the old ones and rebooting.
I also have the most updated version of ADB from Android SDK.
One weird thing is that if i uninstall + delete the current drivers and try to install the ones i got from the SDK and not from the thread I mentioned then it does not install them. So maybe that is where my problem...
Any advice??
Thanks in advance.
Click to expand...
Click to collapse
Did you enable usb debugging?
Also check that you have an option selected under Settings>Storage>USB Computer connection, not having either MTP or PTP selected there will also bork adb.
If you still can't get it to work, try Koush's universal drivers: Link
still not working...
1. Yes, usb debugging is on.......
2. Already tried toggling MTP/PTP/None - When on MTP driver installs successfully but I cannot see the device under adb devices. on the other two options (PTP/None) I am unable to install the driver (tried both the ones on XDA and the ones from MDK)
3. Tried Koush's universal driver - on PTP/None still not able to install drivers. On MTP didn't do much except for changing device name from Android ADB Device to Google Nexus ADB Interface
Thanks for all the quick replies,
Any other suggestions???
akrabi said:
1. Yes, usb debugging is on.......
2. Already tried toggling MTP/PTP/None - When on MTP driver installs successfully but I cannot see the device under adb devices. on the other two options (PTP/None) I am unable to install the driver (tried both the ones on XDA and the ones from MDK)
3. Tried Koush's universal driver - on PTP/None still not able to install drivers. On MTP didn't do much except for changing device name from Android ADB Device to Google Nexus ADB Interface
Thanks for all the quick replies,
Any other suggestions???
Click to expand...
Click to collapse
what does it say when you issue the "adb devices" command? Please write it out here so we can help you. Does it say "device offline"? If yes, then your device is not registered by digital fingerprint by Android SDK.
taodan said:
what does it say when you issue the "adb devices" command? Please write it out here so we can help you. Does it say "device offline"? If yes, then your device is not registered by digital fingerprint by Android SDK.
Click to expand...
Click to collapse
Ok, so I'm with my Nexus connected as an MTP device, with the driver from XDA installed (see attached image), USB Debugging enabled:
Code:
C:\>adb kill-server
C:\>adb start-server
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
C:\>adb devices
List of devices attached
C:\>
Any advice???
Anyone has any advice??
I really have not idea what to do. Tried everything...
Thanks
Works on a different computer
I've connected the phone to my borther's PC and installed the drivers from the SDK. It worked without any problem.
I really can't figure out why it's not working on my laptop.
[Solved]
OK...
So as I said before I tried connecting when PTP is checked and when neither PTP nor MTP are checked and on both couldn't install the drivers properly (neither from xda nor from sdk).
What worked for me:
1. Uncheck both PTP & MTP
2. Device Manager -> Nexus 4 -> Update Driver Software -> Browse my computer for driver software
3. Now instead of browsing to the location I went to "Let me pick from a list..."
4. It should show a list of devices/manufacturers. Clicked "Show All Devices"
5. On the bottom right click "Have a disk"
6. Point to the android_winusb.inf file from Android SDK
7. Choose Android ADB Interface from the list
8. Let driver install
Click to expand...
Click to collapse
Hoped it will help someone.
Thanks to everyone that tried to help. :good: