I am using Defy+ MB526 And have installed paranoid androind CM10 Rom of Jelly Bean!
it gives me 3 recoveries :
1. Stock recovery
2. Stable recovery(ICS recovery)
3. Custom recovery(JellyBean recovery)
But none of these recoveries allow me to make a complete nandroid backup! sometime it shows error while copying android data sometimes android_secure or whatever! Or sometimes Stucks UP!
The fact is recovery is a fail! So any suggestions?? 
Sent from my HTC Explorer A310e using xda app-developers app
No need to create more threads on this Topic, Thanks.
Related
Here the story so far:
1) rooted
2) installed Snd init 2.0 bootmenu 0.6.1
3) backup
4) flashed CM7.2
5) backup
6) restore stock
Now I have 2.5.1.8 clockworkmod, but I had 5.x.x.x with CM I am sure.
Now two questions:
1) how could it happen?
2) can I restore only the recover.img I saved with CM and how?
Sent from my MB526 using XDA App
it is the blue one right? then it is the CWM that gets installed with CM7
Yes, can I install only that recovery without flashing CM7. I have the recovery.img dump.
Sent from my MB526 using XDA App
Maybe I guessed what happened. The "old" clockworkmod writes a big img file with all inside of it, while the new version splits boot, recovery, system, etc.
So when I reverted to original ROM I overwrote the recovery whith the old one (the one i had to make nandroid backup of the original rom).
Anyway, I need help. I have tryed to flash the Clockworkmod from CM following this guide, but fastboot hangs saying "Waiting for device".
Any hint?
Much simpler than I thought: use Defy 2nd init, uninstall and install again choosing bootmenu 1.0.7 latest. This will install also a recovery 5.0.3.x
Sent from my MB526 using XDA
Hello,
10 minutes ago I decided to go into the boot menu to install a new rom, the CM10 to Quarx because before I was on the epsylon, and I'm in recovery, custom recovery and it gives me an error message :'' E: Error in / system / bootmenu / script / recovery.sh (result: No surch file or directory)''
I told her doir be a bug, so I reboot the phone this time in normal and if anything my phone is stuck on the motorola m red, I can not run any rom, and install any rom ... .. Please help me, what should I do please, I lost her, I do not know what to do
thelink974 said:
Hello,
10 minutes ago I decided to go into the boot menu to install a new rom, the CM10 to Quarx because before I was on the epsylon, and I'm in recovery, custom recovery and it gives me an error message :'' E: Error in / system / bootmenu / script / recovery.sh (result: No surch file or directory)''
I told her doir be a bug, so I reboot the phone this time in normal and if anything my phone is stuck on the motorola m red, I can not run any rom, and install any rom ... .. Please help me, what should I do please, I lost her, I do not know what to do
Click to expand...
Click to collapse
Reflash sbf
Sent from my MB526 using xda app-developers app
ppero196 said:
Reflash sbf
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
how to flash sbf ?
thelink974 said:
how to flash sbf ?
Click to expand...
Click to collapse
Read:
http://forum.xda-developers.com/showthread.php?t=1216982
Sent from my MB526 using xda app-developers app
just boot your ROM , plug your phone to the computer , make sure you have USB debugging ON
using ADB or Android Commander , push new recovery into </system/bootmenu>
you can get it from your custom rom ZIP <cm7 , cm9 , cm10 , nvm>
Hi friends,
Currently I am GB I want to flash new CM 10 / Sleam Bean Builds But I am confused on the Recovery Stuff Like How to Change to 2nd Build and Conversion to Ex3...
Because I don't want stuck in SBF flashing process my Laptop is Dead
Can same one give me step by step process
Thank...
Sent from my MB526 using xda app-developers app
Anands3 said:
Hi friends,
Currently I am GB I want to flash new CM 10 / Sleam Bean Builds But I am confused on the Recovery Stuff Like How to Change to 2nd Build and Conversion to Ex3...
Because I don't want stuck in SBF flashing process my Laptop is Dead
Can same one give me step by step process
Thank...
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
go to terminal emulator and tipe: mount | grep data you can see what type of file system, personally not use ext4 for recovery problems "E:/can't mount bla bla"
use the normal process to flash the new rom, if you want to install Epsylon builds you have to set 2ndboot from bootmenu.
if you're with the ext4 file system and want to use ext3 I think you have to flash sbf previously full wipe from stock recovery.
1. Some roms need CWM to be flashed
2. Sometimes you have a specific CWM/TWRP backup to restore
Which files should I keep from a ROM zip to have a flashable zip with only the recovery to flash as needed?
I am particularly intetested in CWM and TWRP from Quarx's CM10.
Sent from my MB526 using xda app-developers app
UncleDan said:
1. Some roms need CWM to be flashed
2. Sometimes you have a specific CWM/TWRP backup to restore
Which files should I keep from a ROM zip to have a flashable zip with only the recovery to flash as needed?
I am particularly intetested in CWM and TWRP from Quarx's CM10.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
\
I haven't tried, but here's some new development.
http://forum.xda-developers.com/showthread.php?t=2352230
You can apparently now have both TWRP and CWM and access them from bootmenu.
I have googled but cannot find any. Plz give a link(for gts 5360)
Sent from my GT-S5360 using xda app-developers app
mjobanjatt said:
I have googled but cannot find any. Plz give a link(for gts 5360)
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Here is it.... :good:
JUST PRESS THANKS IF I HELPED...
Varun hellboy said:
Here is it.... :good:
JUST PRESS THANKS IF I HELPED...
Click to expand...
Click to collapse
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
because it is a temporary cwm so you should flash it again and again for use
mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
There are two types of cwm
Temporary - for users of stock kernel or custom kernel that uses stock recovery
Permanent - cwm is built into the custom kernel & replaces stock recovery
if you want a permanent cwm flash a kernel with permanent cwm (see the kernel features in it's thread)
mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Flash any kernel that has integrated cwm to have cwm permanently .....
mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
try hells fusion.... best kernel for SGY....
Hasn't ANYONE come up with a permanent cwm for our cute little y?!
Kobro said:
Hasn't ANYONE come up with a permanent cwm for our cute little y?!
Click to expand...
Click to collapse
there has been a permanent cwm for galaxy y for years!!
there are two types of cwm
1 - tempory cwm zip
flash this in stock recovery to get to cwm - needs to be flashed each time you want to enter cwm
2 - permanent cwm
flash a custom kernel with cwm built in - this replaces stock recovery
If you want a permanent cwm just flash a kernel that has cwm built it!
marcussmith2626 said:
there has been a permanent cwm for galaxy y for years!!
there are two types of cwm
1 - tempory cwm zip
flash this in stock recovery to get to cwm - needs to be flashed each time you want to enter cwm
2 - permanent cwm
flash a custom kernel with cwm built in - this replaces stock recovery
If you want a permanent cwm just flash a kernel that has cwm built it!
Click to expand...
Click to collapse
thats exactly what i meant! the first option is hardly permanent, especially if you accidentally delete the .zip.
and what if someone doesn't want to flash kernels?
other phones have a .zip that you flash once and have cwm permanently. that's what i meant by a permanent cwm!
Kobro said:
other phones have a .zip that you flash once and have cwm permanently. that's what i meant by a permanent cwm!
Click to expand...
Click to collapse
Then get another phone that has that function.
Remember, our phones are not godly, not everything-can-do phones. They are only bottom-range phones. Hardware and software limitations cause this issue. If you want to fix it, do it yourself.
But if you want to contradict yourself and say "I wanna stick to my little Y" then flash a kernel.
Which is essentially in a zip.
And then you get permanent CWM.
Problem solved.
Kobro said:
thats exactly what i meant! the first option is hardly permanent, especially if you accidentally delete the .zip.
and what if someone doesn't want to flash kernels?
other phones have a .zip that you flash once and have cwm permanently. that's what i meant by a permanent cwm!
Click to expand...
Click to collapse
other phones work in a different way - for example HTC phones have fastboot and a recovery totally different from a samsung galaxy y 5360
the only way in this phone to replace the recovery perminantly is to flash a kernel that has it
GT-S5360b Problems with rom /cwm
Hello guys, I was trying to install the rom PureKat 3.0 (also tried the 1.0 and the 1.5 update extreme) in Galaxy Y GT-S5360b with cwm v5.0.2.6, but got the following message
'' E: Can not open / sdcrd/PureKat1.0.zip
(bad)
Installation aborted. ''
Please, Would anyone help me solve this, I have already given wipe data / reset, wipe cache partition, went into mounts and storage and wipe gave to all options and let it all assembled, but received the same message.
attachments below
. www . dropbox . com /s / yjemrraamenyd1x / CAM00302 . jpg
i'm new herre,so , sorry for write the link with space .
Guh18 said:
Hello guys, I was trying to install the rom PureKat 3.0 (also tried the 1.0 and the 1.5 update extreme) in Galaxy Y GT-S5360b with cwm v5.0.2.6, but got the following message
'' E: Can not open / sdcrd/PureKat1.0.zip
(bad)
Installation aborted. ''
Please, Would anyone help me solve this, I have already given wipe data / reset, wipe cache partition, went into mounts and storage and wipe gave to all options and let it all assembled, but received the same message.
attachments below
. www . dropbox . com /s / yjemrraamenyd1x / CAM00302 . jpg
i'm new herre,so , sorry for write the link with space .
Click to expand...
Click to collapse
Your download was incomplete.Re-download the whole ROM again without any data interruption.
samsung galaxy y
hi guys i want to bring back my original samsung galaxy y os. please give me the link to flash it back. thanks