Database Users

I've Tried the following but still doesnt work Pls. advise

Hello every one.. heres my problem. im stuck in SAMSUNG GALAXY Note logo..but i CAN access thru both CWM and Download:
Heres the list that ive tried based on what ive read from posts but didnt work:
- flash stock GB and pre-rooted LC1 via pc Odin.
- flash KJ1 via pc odin
- flashing with kies and without kies
- flash prerooted rom with pit repartition ticked..
- wipe data thru CWM
the story was .. im trying to flash a ROM based on LPY then suddenly after booth i get stuck at samsung logo.. can someone pls. advise me what to do...im really worried.. thank you..

What Rom were you on before
Sent from my GT-N7000 using xda premium

indie said:
What Rom were you on before
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
LPY then i was trying to flash Midteam 1.2... wipe data then i got stuck suddenly..after that i tried to flash a pre rooted GB rom and still didnt work..

alucard8888 said:
LPY then i was trying to flash Midteam 1.2... wipe data then i got stuck suddenly..after that i tried to flash a pre rooted GB rom and still didnt work..
Click to expand...
Click to collapse
did you do it via CWM app? i've had a softbrick as well while using that
try enter recovery via Vol Up + Home + Power button ....
after that try install once again the zip file
as of for me, fixed my softbrick just now by flashing back my nandroid 2.3.6 backup

What was the result of PC odin flash? Did it get stuck at factoryfs.img?

zekurosu said:
did you do it via CWM app? i've had a softbrick as well while using that
try enter recovery via Vol Up + Home + Power button ....
after that try install once again the zip file
as of for me, fixed my softbrick just now by flashing back my nandroid 2.3.6 backup
Click to expand...
Click to collapse
yes i flash it via CWM but now i can only access CWM orig..

anilisanil said:
What was the result of PC odin flash? Did it get stuck at factoryfs.img?
Click to expand...
Click to collapse
result flash via PC odin success=1 / failed=0 .. but after reboot im still stuck at the samsung logo

Are u flashing with a PIT file with pc odin? Sounds obvious but someone i helped before had a similar problem when using a 32gb pit file with a 16gb note
Sent from my superior Nokia 3210 using XDA Premium Plus Legacy Edition

Maybe
alucard8888 said:
result flash via PC odin success=1 / failed=0 .. but after reboot im still stuck at the samsung logo
Click to expand...
Click to collapse
I believe you did not do a factory wipe after your GB from PC Odin boots, right?
Because the GB flash via PC Odin only put the necessary files into your phone, the residue data from your previous Rom is still in it, upon boot, your system read theses data and do not understand some residue instructions, therefore you are stuck.
Just do a full wipe and cache as well... try it and let me know if I am right?

nuclearmonkeyuk said:
Are u flashing with a PIT file with pc odin? Sounds obvious but someone i helped before had a similar problem when using a 32gb pit file with a 16gb note
Sent from my superior Nokia 3210 using XDA Premium Plus Legacy Edition
Click to expand...
Click to collapse
yes ive flash with pit with 16gbpit file.. cause my note is 16gb..is that right?

lewisteo said:
I believe you did not do a factory wipe after your GB from PC Odin boots, right?
Because the GB flash via PC Odin only put the necessary files into your phone, the residue data from your previous Rom is still in it, upon boot, your system read theses data and do not understand some residue instructions, therefore you are stuck.
Just do a full wipe and cache as well... try it and let me know if I am right?
Click to expand...
Click to collapse
after flashing stock GB after reboot stuck.. then go thru CWM to wipe data successfully wipe and complete.. but after i reboot the system.. im still stuck on logo.. im tryin to think if flashing cf root via odin then flash abyss4.2 kernel then flash an ROM LPY based.. do you think it will work?

After flashing the STOCK GB (very imp)
Get into the stock recovery by pressing vol up+ home+ power button and do a factory reset, you are good to go.
Edit: Do not flash Abyss yet, you would get a yellow triangle.
Also first boot takes sometime, how long are you waiting before trying again. Just do a factory reset on stock GB rom, power off, remove the battery and wait for sometime. Put the battery and boot again! It may take some time but it should boot.

anilisanil said:
After flashing the STOCK GB (very imp)
Get into the stock recovery by pressing vol up+ home+ power button and do a factory reset, you are good to go.
Edit: Do not flash Abyss yet, you would get a yellow triangle.
Also first boot takes sometime, how long are you waiting before trying again. Just do a factory reset on stock GB rom, power off, remove the battery and wait for sometime. Put the battery and boot again! It may take some time but it should boot.
Click to expand...
Click to collapse
after flashing Stock GB successfully and waitin for it to pass samsung logo i think 30mins+... so ive tried to go to recovery then wipe data.. after that it reboots waiting again to pass to samsung logo but no luck...
but i will try it once again.. flash stock gb from sammobile and wait ...thank you

alucard8888 said:
after flashing Stock GB successfully and waitin for it to pass samsung logo i think 30mins+... so ive tried to go to recovery then wipe data.. after that it reboots waiting again to pass to samsung logo but no luck...
but i will try it once again.. flash stock gb and wait ...thank you
Click to expand...
Click to collapse
30 minutes is like too long. Just try one more time and see or flash a different ROM, a wipe one, preferably?
If the PC Odin is flashing it successfully, then you do not have to fear, all is well

anilisanil said:
30 minutes is like too long. Just try one more time and see or flash a different ROM, a wipe one, preferably?
If the PC Odin is flashing it successfully, then you do not have to fear, all is well
Click to expand...
Click to collapse
ok i will try to flash KL8 a wipe Rom from dr. ketan's thread.. thank you

[Q] Phone no booting up .....

Hi everyone
i was trying to install cutom rom in my gsy. i wiped it data , cache and dalvic cache . and installed it using 'install zip from sd' mode in CWM. and rebooted and waited to start in 5 minutes . but instead it just hanged in its galaxy young screen . And i am just blank what to do next
custom rom - jellyblast 3

If you can go to recovery mode try wiping data and cache again and if you can't go to recovery mode try flashing a stock rom again
Sent from my GT-S5360 using xda app-developers app

"theviper" said:
If you can go to recovery mode try wiping data and cache again and if you can't go to recovery mode try flashing a stock rom again
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
But how can i flash
My mobile hangs just in the first boot screen i.e. where it states"Samsung galaxy y young GT-5360"

please learn to search,
there are like a thousands of threads out there to teach you how to fix your phone

Use odin. Download the appropriate firmware from the general thread and use Odin 1.85 provided in the attachment. Put your phone in download mode by holding home, power and volume DOWN key. Press the volume up key to enter Odin mode. Extract your firmware files somewhere and link the relevant files in the relevant places in Odin. Dont worry about the files not present. Connect your phone and there will be an indication your phone is connected. A white area turning yellow.
Click start. Youre most likely going to experience bootloops but now you can boot into recovery and wipe data and cache and install the ROM you wanted.

Problems with recovery mode

i have a samsung galaxy y (gt 5360), and
its updated to android 4.1(not officially-using jellyblast 3.0.3 rom)
Then i rooted it and i was
messing around with the
awesome power of root. now im trying to get a
different rom, and when i go to
recovery mode, i cant flash zip files, it always gives an error message"can't mount /sdcard (No such file or directory)".
But when i reboot the system i can mount sd card and can browse all files in sd card.
Does anyone know how to fix
this recovery problem??? PLEASE HELP?!!
Send from my jelly 1.0.1 using xda app-developers app

Try a different cwm_bla_bla.zip

But i cant flash any zip files... even cwm..
Sent from my jelly 1.0.1 using xda app-developers app

Go to CWM >> mounts and storage>> mount everything. [sys, data,cache,sd ]
It should work now.
Btw, which kernel??
Questions? Better go to [Help Thread] by Deadly
----------------------------------
Sent via a CM'd calculator

Change ur SD card and see.

Try to remove the sd card then put it back
And after that go to CWM Recovery
Go for Mounts and Storage
Mount /system
Mount /data
Mount /sdcard
Then try to flash the zip file
hope it helps
or you could just press thanks if it helped

If still not working...
If mounting your SD card or changing your SD card won't work, Try my Steps on flashing a new firmware:
1. Firstly, download/choose a firmware from here: http://forum.xda-developers.com/showthread.php?t=1465800
2. Once your download has finished, download Odin 1.85 from here: forum.xda-developers.com/attachment.php?attachmentid=581913
3. If you have installed Samsung Kies, stop it, also for adb sessions
4. Open Odin 1.85
5. Boot to download mode, make sure its shut down (Vol. Down + Home Button + Power Button)
6. When in download mode already, press Vol. Up button
7. Now, connect your phone to your pc, when Odin detects your phone you can now press the start button
8. Wait for installation to complete, it will reboot automatically,
9. When successfully booted, your done!
10. Enjoy! your newly fixed phone...
Above instructions are not fully detailed(COMPLETE), but it will work
For Full Instructions Go Here: http://forum.xda-developers.com/showpost.php?p=21846668&postcount=2
Instructions are posted in the same thread, though :angel:
Don't forget the thanks button if I helped!

Bryan.Next said:
If mounting your SD card or changing your SD card won't work, Try my Steps on flashing a new firmware:
1. Firstly, download/choose a firmware from here: http://forum.xda-developers.com/showthread.php?t=1465800
2. Once your download has finished, download Odin 1.85 from here: forum.xda-developers.com/attachment.php?attachmentid=581913
3. If you have installed Samsung Kies, stop it, also for adb sessions
4. Open Odin 1.85
5. Boot to download mode, make sure its shut down (Vol. Down + Home Button + Power Button)
6. When in download mode already, press Vol. Up button
7. Now, connect your phone to your pc, when Odin detects your phone you can now press the start button
8. Wait for installation to complete, it will reboot automatically,
9. When successfully booted, your done!
10. Enjoy! your newly fixed phone...
Above instructions are not fully detailed(COMPLETE), but it will work
For Full Instructions Go Here: http://forum.xda-developers.com/showpost.php?p=21846668&postcount=2
Instructions are posted in the same thread, though :angel:
Don't forget the thanks button if I helped!
Click to expand...
Click to collapse
-_-
Understand the problem correctly? I see your post and i knew you were just doing the 10 post thingy.
Good going but try to understand the prob and then help. Thank you!
And OP, there is no actual need of odin. Mount and try.
I feel your CWM is the problem. Flash stock kernel from Doky's thread and try again!
Questions? Better go to [Help Thread] by Deadly
----------------------------------
Sent via a CM'd calculator

My stock recovery dosnt support mounts&storage option.. to use cwm recovery i have to select a zip file from sdcard. But now i cant even mount sdcard so i cant use cwm too..
Iam using 2.6.35.7 [email protected] #18 kernal..
Sent from my jelly 4.1.2 using xda app-developers app

My recovery jst looks like dis... when i select 'apply update from sdcard' it gives an error msg lyk dis..
Sent from my jelly 4.1.2 using xda app-developers app

Try flashing stock kernel.
It should work.
Or else try to use a different SD.
First go with a different SD. Still if it doesn't mount, flash stock kernel and try. DONT TRY TO FLASH ANY OTHER KERNEL.
AND HAVE A BACKUP!
-------------------------------------
Questions? Better go to [Help Thread] by Deadly

Well i guess its a sd problem try formatting your sd card using a card reader or something then retry it doesn't work then try a different sd card to flash cwm bla bla.zip. I think it should work good

I had tried it bfore.... bt no use @all.. i thnk i hav problmz wth recovery mode..
Sent from my jelly 4.1.2

abyisforyou said:
I had tried it bfore.... bt no use @all.. i thnk i hav problmz wth recovery mode..
Sent from my jelly 4.1.2
Click to expand...
Click to collapse
1.Flash stock kernel.
2. Change SD
3. Download cwm of mad team.
4. Try flashing
If that doesn't work... flash via Odin.
-------------------------------------
Questions? Better go to [Help Thread] by Deadly

[Q] can't boot sgy???

Hey guyz i'm in a great problem. Recently i flash merruk kernel but when i flash stock kernel over it i got mounting problem in both stock and cwm recovery. So i flash white kernel and then everything is fine.but in cwm recovery to flash stock kernel over white i format system data cache and then mount those and then flash stock kernel and from advanced i select reboot recovery. But i'm stuck at boot logo. Then recovery not open only download mode open so i flash fresh stock rom via odin but still stuck at boot logo. So i remove battery but now phone not open even the galaxy y logo when i charge phone the battery image not appear. Plz help me guyz........sorry for my big post...

Can't boot even in SGY logo ? try to remove the battery for 10-20sec. then go to download mode
Sent from my GT-S5360 using xda app-developers app

Arghyadeep said:
Hey guyz i'm in a great problem. Recently i flash merruk kernel but when i flash stock kernel over it i got mounting problem in both stock and cwm recovery. So i flash white kernel and then everything is fine.but in cwm recovery to flash stock kernel over white i format system data cache and then mount those and then flash stock kernel and from advanced i select reboot recovery. But i'm stuck at boot logo. Then recovery not open only download mode open so i flash fresh stock rom via odin but still stuck at boot logo. So i remove battery but now phone not open even the galaxy y logo when i charge phone the battery image not appear. Plz help me guyz........sorry for my big post...
Click to expand...
Click to collapse
JhellreyÜ said:
Can't boot even in SGY logo ? try to remove the battery for 10-20sec. then go to download mode
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
already tried by removing battery for some time but no luck phone doesn't open. Even the sgy logo doesn't appear.....

To start with you got mount errors in stock kernel as it doesn't support ext4 system partition - Merruk Whitexp percy & hells fusion #50 do
If you can get into recovery mode - format data after flashing stock rom via odin
If you can only get into download mode - reflash stock rom correctly using the firmware packages on dokys thread in dev section
If you can't get into either normally
turn off phone
remove everything from it (battery sd sim)
connect phone to pc via usb
open odin on pc
with battery still removed press keys to enter download mode
with keys pressed still reinsert battery
phone should be in download mode
if not you need a USB jig or take to service centre as you flashed the wrong firmware or not correctly

Arghyadeep said:
already tried by removing battery for some time but no luck phone doesn't open. Even the sgy logo doesn't appear.....
Click to expand...
Click to collapse
.. How this happened? Dead boot ? i think Deadboot isn't happening nowadays..
Sent from my GT-S5360 using xda app-developers app

marcussmith2626 said:
To start with you got mount errors in stock kernel as it doesn't support ext4 system partition - Merruk Whitexp percy & hells fusion #50 do
If you can get into recovery mode - format data after flashing stock rom via odin
If you can only get into download mode - reflash stock rom correctly using the firmware packages on dokys thread in dev section
If you can't get into either normally
turn off phone
remove everything from it (battery sd sim)
connect phone to pc via usb
open odin on pc
with battery still removed press keys to enter download mode
with keys pressed still reinsert battery
phone should be in download mode
if not you need a USB jig or take to service centre as you flashed the wrong firmware or not correctly
Click to expand...
Click to collapse
ok thanks i will try....but what is usb jig?

Arghyadeep said:
Hey guyz i'm in a great problem. Recently i flash merruk kernel but when i flash stock kernel over it i got mounting problem in both stock and cwm recovery. So i flash white kernel and then everything is fine.but in cwm recovery to flash stock kernel over white i format system data cache and then mount those and then flash stock kernel and from advanced i select reboot recovery. But i'm stuck at boot logo. Then recovery not open only download mode open so i flash fresh stock rom via odin but still stuck at boot logo. So i remove battery but now phone not open even the galaxy y logo when i charge phone the battery image not appear. Plz help me guyz........sorry for my big post...
Click to expand...
Click to collapse
helo firs u need to make nadroid backup
after finish then restore

[Q] Im new into custom rooms

Hello guys!
I rooted my Note 2 and now I want to put DN3 rom on it.
So I did what this topic said http://forum.xda-developers.com/showthread.php?t=2143479 .
Ok , I did this , but now what do I have to do?
"2) Go to CWM recovery via pressing home + power + volume up button at the same time.
3) Use the "Clean to install a new rom" option in Wipe Data and system.(clean installation recommended)"
well on my CWM it don't show Clean to install a new room or something.
Please help me!

I think clean to install new rom is an option in phils recovery not sure it's in the normal cw recovery
Sent from my GT-N7105 using Tapatalk

costinmike said:
Hello guys!
I rooted my Note 2 and now I want to put DN3 rom on it.
So I did what this topic said http://forum.xda-developers.com/showthread.php?t=2143479 .
Ok , I did this , but now what do I have to do?
"2) Go to CWM recovery via pressing home + power + volume up button at the same time.
3) Use the "Clean to install a new rom" option in Wipe Data and system.(clean installation recommended)"
well on my CWM it don't show Clean to install a new room or something.
Please help me!
Click to expand...
Click to collapse
In CWM the wipe data is in the first set of options that are displayed when you enter CWM.
to wipe (format) system, you have to select Mount and Storage and then select format system.

Well Bro u try Philz recovery for n7100 given in original android section. If u r using dn3 4.3 Ron thn use Philz 5.15. If dn3 4.4.2 rom then use latest Philz 6.9.2.. Cwm recovery has no option of clean install buddy.
Hope it helps u.
Regards.
Sent from my GT-N7100 using xda premium

Here is d link..
http://forum.xda-developers.com/showthread.php?t=2028103
Sent from my BEAST NOTE 2 using xda premium

Hi!
Look for FAQ post (#4) in DN3 thread or see my signature for dn3 FAQ. There you will find detailed information.
Greetings