Database Users

WHO CAN HELP ME in this Thread... please!

I have a BIG problem because I install this app 'EveryWAN-Remote-Support-3-0-15760' from this http://www.sparus-software.com/spip....wnload&lang=en and I don't know why... my HD is death now I was in activesync with this app and I try all tools TaskManager, FileStorage and when I click the icon 'turn-off screen'... no more HD..., no charge... dont soft-reset, don't bootloader, etc. I'am now very un-happy because I don't understand what's happen with my HD

If nothing else work, why don't you try a hard reset?
http://www.youtube.com/watch?v=puL795s1bY4 <- second half of the video is how you do it.

Hi,
Have you tried to remove the battery, wait a little, and place it back?
Also, refer to this thread:
http://forum.xda-developers.com/showthread.php?t=465601
Regards,
P.

Thanks for your help... I know do a Hard-Reset but the problem is don't charge, don't show the red led in top charging also, I put off the battery 20 minutes and no way... don't work the button Power... don't work the button Soft-Reset, I can't enter in Bootloader mode...

Hi,
Have you checked that thread I mentioned?
Look specially at this post:
pdc4 said:
Well, some other things to try:
- check if some button (including soft reset) is mal-functioning. Try to release, or clean them.
- is any card (sim or memory) in the phone? If yes, remove them.
- has the phone been exposed to moisture, liquids? ensure that it is dried out, but do not expose it directly to heat or to a dryer...
- try to connect the charger to the phone without battery, leave it a little then disconnect, then place battery and finally the charger , trying to power on
- have you contacted the author of the rom about the issue? Maybe he might have some ideas ...
Good luck!
Regards,
P.
Click to expand...
Click to collapse

Yes I check and I follow all... my Rom is Pzucchell 1.7 but... when I have this problem... I was in AS with this app EveryWAN Remote and like I say before... when I click Turn-off screen I only see similar this http://forum.xda-developers.com/showpost.php?p=3106017&postcount=22

Stuck at red M

Hello, so my atrix was perfect like 2 hours ago. I ad neutrinos rom gt+ on it for like 2 days days and everything was perfect. But ! well i was playing a bit with it and deleted some stuff in the android folder of my internal sd, it was only real racing 2 game files and some other stuff. I played some more with it and my screen started flashing strangely and doing weird stuff. I closed the screen, i opened back same thing. The phone shutted down itself. I tried rebooting and now im stuck at the red m logo with unlocked in the top left corner. i tried to access recovery by doing a battery pull and rebooting but i dont have access to the little menu. Anybody can help me fix this?

Silly question but are you holding down the volume down rocker button during boot? Do you get the prompt for fastboot, android recovery, etc ?
If it pops up scroll down using volume down to android recovery and hit the volume up to select it.
Should be able to fix it from there.

When i hold down volume down button there is absolutely no prompt pf any kind =\ i already installed some stuff with cwm and i had to go through there, but now i have nooothing =(

pyfviperx said:
When i hold down volume down button there is absolutely no prompt pf any kind =\ i already installed some stuff with cwm and i had to go through there, but now i have nooothing =(
Click to expand...
Click to collapse
Did you update to the latest firmware? If so it might be wise to see about reflashing that same firmware again with RSD. It's a pain in the arse and you might have to do it a few times to get it to work right, but it is possible. I had the latest build CM7 on my atrix and I reflashed to stock just to see if I could.
I'm not kidding though when I say it's a painful process, the phone might get stuck in a boot loop (where it goes to the M Dual Core logo and just reboots). If that happens you're still okay cause you can just keep reflashing the stock .sbf file till it takes (just don't downgrade).
Your call though.

Meh today its completely dead, i checked it today and all ihave is green led =(
Edit: Plugged it in wall charge instead of computer, back to M logo =(

Unlocked bootloader so best not to use RSD. Can you get fastboot? Reboot and hold volume up instead of down.
Sent from my MB860 using xda premium

Just tried, my battery is completely dead. So i pressed power and volume up then i putted battery in ( at this point i still didnt had any boot) and i plugged in my usb charger, nooothing... Just the red m logo and the nice little unlocked in the top left corner...

pyfviperx said:
Just tried, my battery is completely dead. So i pressed power and volume up then i putted battery in ( at this point i still didnt had any boot) and i plugged in my usb charger, nooothing... Just the red m logo and the nice little unlocked in the top left corner...
Click to expand...
Click to collapse
Find a friend with an Atrix and use their phone to charge your battery, or try going into an AT&T store and asking if you can charge it there on a display phone.

Im in canada =/ but one of my friend got an atrix, ill charge the battery with his phone BUT back when my battery was still charged i still couldnt get to fastboot/recovery power+up and power+down didnt worked neither. Is it hard bricked?

Il also ordered stuff to make a motorola factory cable, think i will be able to do anything with this?

Still seeking help guys! I loved my atrix please help me to recover it :/

pyfviperx said:
Still seeking help guys! I loved my atrix please help me to recover it :/
Click to expand...
Click to collapse
Well, if you can't get into either recovery, fastboot, or rsd mode you won't be able to fix it. Make sure you're pressing the volume down button as you boot the phone, and keep it held down until the options come up.
Sent from my MB860 using xda premium

[Q] HD2 Android will not boot

I have had ICS on my HD2 for about 3 months and working fine. Last night I plugged it into the computer USB to charge it up and it went into the tricolour screen with USB connection (may be I pressed something while plugging it in?). Unplugging it made no difference and the only way out was to remove the battery temporarily. I think I then tried rebooting and it seemed OK. This morning it will not boot up at all - it seems to start, goes past the short vibration and the screen is backlit but the Nand Rom does not boot. Can anyone suggest how to proceed or do I now own a brick?

Check the pins that connect your device with the batter and make sure they're straight. It also seems that you're out of juice, recharge the battery.

Marvlesz said:
Check the pins that connect your device with the batter and make sure they're straight. It also seems that you're out of juice, recharge the battery.
Click to expand...
Click to collapse
Thanks - the pins are OK and I can charge the battery and the orange LED changes to green so I assume it is fully charged. Any other suggestions please?

First try leaving the battery out for a few minutes but...
could be a power button issue, the digitizer cable runs too close to it in the HD2!
If you are confident enough you could open it up and check?
Flicking the power button a few times might make it work but is not going to solve the problem...

shanman-2 said:
First try leaving the battery out for a few minutes but...
could be a power button issue, the digitizer cable runs too close to it in the HD2!
If you are confident enough you could open it up and check?
Flicking the power button a few times might make it work but is not going to solve the problem...
Click to expand...
Click to collapse
Thanks for the reply. There might be a clue in what you have said here because I have noticed recently that sometimes I have had to press the power button one or two times to bring it out of sleep mode. So perhaps it is the digitizer cable which has a flaky connection. I don't mind delving inside but not having done it before I would like to see some guide on how to proceed first. Does the symptom support your suggestion?

Yes..
There are some good tutorials in the sticky roll-up thread
Sent from my NexusHD2 using xda premium

shanman-2 said:
Yes..
There are some good tutorials in the sticky roll-up thread
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
Thanks, so I may not own a brick then! I need to get a T5 screwdriver and I notice that some LCD and digitizer suppliers offer the tools with them. Am I likely to need a new LCD and digitizer for this repair?

Don't know about that!!
Sent from my NexusHD2 using xda premium

shanman-2 said:
Don't know about that!!
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
OK. I found a screwdriver, watched some videos, and took it apart. I could not find any connection problems or chaffing by the power button so I thought I would just try to put it back together. Got it back together and it powers up as before with short vibration and the screen is backlit but nothing is displayed so I have no knowledge as to whether the LCD/Digitizer is at fault or something else is preventing the bootup and not sending signals to the screen display OR has the bootup occurred but I cannot see tthe progress because the LCD/Digitizer is faulty. Has anybody any idea what is the likely cause of the problem so I can decide whether to buy a new LCD/Digitizer or not?

PaulStory said:
OK. I found a screwdriver, watched some videos, and took it apart. I could not find any connection problems or chaffing by the power button so I thought I would just try to put it back together. Got it back together and it powers up as before with short vibration and the screen is backlit but nothing is displayed so I have no knowledge as to whether the LCD/Digitizer is at fault or something else is preventing the bootup and not sending signals to the screen display OR has the bootup occurred but I cannot see tthe progress because the LCD/Digitizer is faulty. Has anybody any idea what is the likely cause of the problem so I can decide whether to buy a new LCD/Digitizer or not?
Click to expand...
Click to collapse
Hey very sorry for this but on reading your post again.....
Have you tried booting to recovery or bootloader again?
If so and you can view the screen again!!, Just re-install the ROM clearing cache and dalvic cache beforehand. :silly:

shanman-2 said:
Hey very sorry for this but on reading your post again.....
Have you tried booting to recovery or bootloader again?
If so and you can view the screen again!!, Just re-install the ROM clearing cache and dalvic cache beforehand. :silly:
Click to expand...
Click to collapse
Hi again and thanks again I have tried to get to the Bootloader screen and also to the Magldr menu but I just get the screen backlit and no more. So before forking out on a new LCD/Digitizer the question in my mind is - is this the LCD/Digitizer or some other hardware/software problem which a screen replacement will not solve?

That's the burning question!
I could not possibly say for sure, if the power button was giving problems leading up to the display problem then it is "quite likely".
More than that i cannot say.
Sent from my NexusHD2 using xda premium

shanman-2 said:
That's the burning question!
I could not possibly say for sure, if the power button was giving problems leading up to the display problem then it is "quite likely".
More than that i cannot say.
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
OK, I have tried the screen and digitizer in another phone and it works fine. So this implies the phone hardware or software is not working correctly. I pressume that this implies it is a brick but I wonder if there are any tricks that can be used to ressucitate it? Any comments would be useful. Do I need to replace a specific board or component? Thanks for all the help so far.
http://forum.xda-developers.com/images/smilies/fingers-crossed.gif

[Q] [HELP] Stuck in bootlogo

Hey guys,
First of all, I searched for my problem but couldn't find a solution anywhere. This is the most unusual kind of "bootlogo stuck". My phone shows the bootlogo for several seconds, then turns off. I go to the recovery mode (CWM), it appears ("reboot system now", "...", all that), but then again the bootlogo appears and after several seconds the phone turns off. I go to the download mode, it appears, but then again, I see the bootlogo and my phone turns off. So obviously flashing the stock rom turned out to be a failure in this case. I first thought that maybe I needed to recharge my phone. But when I plugged the charger, there was no display of the battery icon. I left it like that, hoping it was charging, but the same problem occurred after a while when I checked. Oh, and one more thing, whenever, I took out the battery and put it back again, the bootlogo showed up (even when I hadn't touched the power or any button!).
It's been several months since I detached myself from Android development. The last ROM that I flashed was Hyperion 8 four months ago, I don't exactly remember the kernel that came with it.

If power button seems to b the issue, you can fix it by *slightly* striking its side against a hard surface(may b table or wall). You might not believe but this method is 99% working.
But do this only when u r left with no choice. Don't get me wrong
Sent Via XDA™ Premium

Galaxy_Rohit said:
If power button seems to b the issue, you can fix it by *slightly* striking its side against a hard surface(may b table or wall). You might not believe but this method is 99% working.
But do this only when u r left with no choice. Don't get me wrong
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Although your solution sounded kinda stupid considering the type of problem i had in mind, i did try it and it worked!! Thanks a lot Rohit !

anasdcool71 said:
Although your solution sounded kinda stupid considering the type of problem i had in mind, i did try it and it worked!! Thanks a lot Rohit !
Click to expand...
Click to collapse
lol.. such a simple solution.. haha.. glad it work.. sometimes old gadget user have solution that we cant think ourself..
sent via Sony W880i

Good one....cheers to Samsung hardware xD
Sent from my GT-S5360 using xda app-developers app

assphere said:
lol.. such a simple solution.. haha.. glad it work.. sometimes old gadget user have solution that we cant think ourself..
sent via Sony W880i
Click to expand...
Click to collapse
i also had this issue... you can't catch up with recovery console or download mode because the phone automatically turns off..
Reason: The power switch is shorted... But sometimes the rubber between the power button and the switch in the circuit is jammed... i fixed it myself... replaced the microswitch myself.....

Same problem
HELP!! Same problem. Stroked against hard surface and flashed the ROM.
nothing worked. Help please.

Cool !!

It really did work! what a hardware i've got here.

Home Button + FPS not working!

Today morning (about 6 hours ago), i was having bath and i picked up a call and after i got out of bathroom i saw that my home button was not responding. I tried rebooting and clearing cache. Nothing worked. I was on exodus at that time. Now I flashed oxygen OS 3.0 hoping it would work. But no luck
Can any1 tell me a solution??
PS - I havent tried charging solution (draining battery completely and full charging)
- Look at the Screenshot. Does it say 'PASS'?

Can any1 help me??
Sent from my ONE A2003 using Tapatalk

Yes bro... I hd sffr from this issue and solving by this way...
1)Reflash ur exodus modem on the rom
2)this will surly work
Flash h20s mm rom ... Then u cnn see ur fp worlng..and again go to ur dzire rom...

I had same trouble, flashed many roms official and developped, tried many tricks found in the web.... NO SUCCESS....
Finally i have opened my phone, touched the flat connection inside close to the home button, restarted my phone..... and all was OK AGAIN.....
So I definitively think it's a problem of contacts....
Take a look here: http://forum.xda-developers.com/showpost.php?p=66396613&postcount=46

Thanks I'll try both methods
Sent from my ONE A2003 using Tapatalk

With the mine you loose your guaranty!

Okay. btw @neelsolanki
Both methods didnt work.
I think i have to go to service center. I think this might have happened due to wet hands
Sent from my ONE A2003 using Tapatalk

I've now had my fp sensor & home button die twice, the first time I tried everything under the sun, I reflashed all the things, tried stock everything, tried my luck with the contacts and also did the battery drain trick twice.. All to no avail.
I then gave up and accepted it for dead whilst waiting on a replacement button to be delivered, but before I got the chance to swap out what I though to be bad components unexpectedly the home button returned all functionality just like that.
It's now happened twice, and both times resolved itself frustratingly mysteriously.
Try not to be too worried about it all, enable your software keys and wait it out for the next 3-4 days.
And also, the first time my home button died I'd been using a wet cloth to dislodge dirt lodged in the cutout around the home button. So even seemingly water damage isint the be all and end all..

LOL9988 said:
Today morning (about 6 hours ago), i was having bath and i picked up a call and after i got out of bathroom i saw that my home button was not responding. I tried rebooting and clearing cache. Nothing worked. I was on exodus at that time. Now I flashed oxygen OS 3.0 hoping it would work. But no luck
Can any1 tell me a solution??
PS - I havent tried charging solution (draining battery completely and full charging)
- Look at the Screenshot. Does it say 'PASS'?
Click to expand...
Click to collapse
This worked for me:
http://forum.xda-developers.com/oneplus-2/general/guide-official-stock-reset-to-oos-2-2-0-t3290707
Backup all your data before doing it. It wipes all partitions, including internal SDCARD.

Worked for me
konroma said:
I had same trouble, flashed many roms official and developped, tried many tricks found in the web.... NO SUCCESS....
Finally i have opened my phone, touched the flat connection inside close to the home button, restarted my phone..... and all was OK AGAIN.....
So I definitively think it's a problem of contacts....
Take a look here: http://forum.xda-developers.com/showpost.php?p=66396613&postcount=46
Click to expand...
Click to collapse
This worked for me
after I tried
flashing different roms
battery drain trick
holding home button, then force power off (after I did this, the fingerprint part worked, but the home button was overly sensitive, I could have my finger 3 inches away and it would detect it)
clearing cache
full wipe
full factory reset
I might use some rubber cement or glue to hold the connections in place, but im going to run with it for a while to see.

I put my phone this night in container of rice. Hoping it would solve the issue. Still it isn't working[emoji20] . I'm afraid of disassembling the phone. I think going to service center is only the hope
Sent from my ONE A2003 using Tapatalk

jukyO said:
This worked for me:
http://forum.xda-developers.com/oneplus-2/general/guide-official-stock-reset-to-oos-2-2-0-t3290707
Backup all your data before doing it. It wipes all partitions, including internal SDCARD.
Click to expand...
Click to collapse
Seems like I'll try this and charging trick before I go at service center
Edit - That link isn't working my friend.
Sent from my ONE A2003 using Tapatalk

LOL9988 said:
Seems like I'll try this and charging trick before I go at service center
Edit - That link isn't working my friend.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Works fine for me:
http://forum.xda-developers.com/oneplus-2/general/guide-official-stock-reset-to-oos-2-2-0-t3290707

jukyO said:
Works fine for me:
http://forum.xda-developers.com/oneplus-2/general/guide-official-stock-reset-to-oos-2-2-0-t3290707
Click to expand...
Click to collapse
My device doesnt detetct in the tool. It stays 'RELINK' in the device manager all time. I tried everything

This http://forum.xda-developers.com/oneplus-2/general/guide-helper-zips-to-switch-oos-3-0-oos-t3351253 fixes the home button for me. Use LP.zip as the post says, that made both the home button and fingerprint sensor work perfectly for me in CM 13.

johnthepig said:
This http://forum.xda-developers.com/oneplus-2/general/guide-helper-zips-to-switch-oos-3-0-oos-t3351253 fixes the home button for me. Use LP.zip as the post says, that made both the home button and fingerprint sensor work perfectly for me in CM 13.
Click to expand...
Click to collapse
May /may not work.. Happnd with me.. Sometime it will fix by changing modem images(reverting lp/mm).. Try to flash oxygen rom and if u lost fingerprint option then ur sensor bcm dead..gv it to service station.i got my home button in 2 days from service station ..