I bought a replacement battery for my defy because the stock battery has bulged and now quickly loses its charge. I got the new one from eBay and it has, 3500 mah. I'm currently using Mokee OS for my defy but the battery percentage that it is showing doesn't seem to be accurate because it has been at 1% for more than 12hrs now, no kidding. I have wiped the battery stats for this after the first full charge and I also used battery calibration. Has anybody experienced this when they replaced the battery?
Sent from Defy (dead LED flash because Chinese SBF)
You should flash your Phone with battery fix appropate to New one. try that one for defy+
That's what you'd get when using different capacity from stock ones.
Defy/Defy+ would recognize only 1500/1700 mAh batterys, it's fixed in the rom.
There's no fix for Hi-capa battery, you may just live with it, or try Momax 1500mAh if you like.
Try it with different battd binary files. According to this video it can work correctly.
Related
Hello. I have 2 battery's for my defy+. They are both the same mah. My problem is that if I charge one battery to 100% then change to the other battery and charge that to 100% when I then put my first battery in it will only charge to 84 %. I have tried battery calibration and wipeing battery stats.. I'm running white rabbit 1.3 atm..
Hope that someone can understand what I mean
Sent from my MB526 using xda premium
the 84% charging bug is because of the software inside your phone, not the battery
most custom ROMs for the defy+ charge only upto 84%( except CM7 with a patch made by AL). The rest don't charge upto 100%.. Go for MSGinger or Stock ROM
I had bricked my defy MB525 and bought a new battery since the old one was inflated. After installing the battery I managed to flash the Eclair T-Mobile SBF but after that the bootloader read "Low Battery Cannot Program". When i plugged it into the charger I got a screen with a battery and a ? in it. When i connect it to my PC it charges, switches on and then dies after 10 mins. The cycle keeps repeating. The bootloader and stock recovery don't work. When i pushed battery calibrator it read 5% and 3119 mV just before it dies every time. At first it was at 3254 mV. My question is how to get the phone to charge to 100% so i can calibrate the battery since it keeps discharging after bootup.
nitin95 said:
I had bricked my defy MB525 and bought a new battery since the old one was inflated. After installing the battery I managed to flash the Eclair T-Mobile SBF but after that the bootloader read "Low Battery Cannot Program". When i plugged it into the charger I got a screen with a battery and a ? in it. When i connect it to my PC it charges, switches on and then dies after 10 mins. The cycle keeps repeating. The bootloader and stock recovery don't work. When i pushed battery calibrator it read 5% and 3119 mV just before it dies every time. At first it was at 3254 mV. My question is how to get the phone to charge to 100% so i can calibrate the battery since it keeps discharging after bootup.
Click to expand...
Click to collapse
Is the battery an official motorola one ?
bilibili2011 said:
Is the battery an official motorola one ?
Click to expand...
Click to collapse
Yeah it,s the BF5X 1500mAh battery..
nitin95 said:
Yeah it,s the BF5X 1500mAh battery..
Click to expand...
Click to collapse
I think your new battery has a problem and can't charge (i'm not sure), you should ask for a new one where you have bought it .
Have a look here: http://www.youtube.com/watch?v=FaxBYF8vqig
http://forum.xda-developers.com/showthread.php?t=892026
http://forum.xda-developers.com/showthread.php?t=2102113
http://forum.xda-developers.com/showthread.php?t=2202747
i thought new batteries, genuine or not, don't come fully charged? you were lucky to even able to flash the sbf with the little charges it had. a better idea would be to buy an external battery charger in my opinion.
Hi,
My Defy (MB525) was not charging so i replaced with a duplicate battery and it worked for a day only and now both batteries shows a question mark while charging...
Just want to confirm, that means a bad battery right? So if i buy a new one, may be a high capacity one, my phone will work???
If its a battery issue, where can i get a descent battery.?
IMAGE ATTACHED.!!
Hello. This is my firs post. I'm running CM13 with 0919 build on my L01 Ascend G7, and have an issue with battery capacity. Only 2000mAh is availible, instead od 3100mAh. Is there a fix for it?
Same phone, stock ROM, but my battery shows as only 2000mAh too, not sure if it ever showed 3000mAh, but if it changed it was only after unlocking the bootloader.
Not sure if there is an actual fix as not sure if anything broken as such. Battery still performing normal and good long life, over 2 days with normal use and no charge.
I have shorter battery life. After a full charge to 100% today, 7 hours later its @45%. I did a battery optimisation with an app, now I'll discharge it to 0% and then to full charge. Hope it will fix something, if nothing helps then its back to stock 5.1 lolipop.
Hello,
I've bought an extended Battery for my GT-I9505.
My Problem:
I don't feel anything of the power increase from the new battery... It's still discharging between 8-10 hours like the Stock one.
I deleted the batterystats.bin,
I calibrated the battery,
I charged and discharged it completly several times,
After a quick research I got the Information, that I need another Kernel, becouse the Stock one don't accept the bigger battery (the kernel think the battery is full charged but the battery isn't really.)
And if I combine 1 and 1 my thought is:
The more the battery is charged, the more the output voltage.
The Mobile recognise if the battery is full to avoid an overloading.
This recognise is taken from the output Voltage exact like the percent scale.
When the Stock battery reached his 2600mah capacity the output voltage is for example 4.000 Volt.
2600 mah --> 4.000 Volt --> 100%
BUT HERE IS THE PROBLEM:
As soon as the 4.000 Volt ≙ 2600mah are reached with the new 5600mah battery the mobile thinks its full charged to protect from an overload.
And I think, that the Battery isn't really full even if the mobile says that.
Can anyone help me?
I'm don't think this is the case. I'm pretty sure there are people using extended batteries on stock ROMs.
Could it just be that the capacity is fake?
Not really... The battery has good ratings on ebay
Pwnycorn said:
I'm don't think this is the case. I'm pretty sure there are people using extended batteries on stock ROMs.
Could it just be that the capacity is fake?
Click to expand...
Click to collapse
No its from mtec