Related
Dear Xda members,
I need your help,
My htc Magic has been damaged!
When I start it, nothing happens.
The recovery mode doesn t work: I can see it but just few seconds.
The fastboot is still working.
Is it possible to rescue my phone?
Many thanks in advance,
D.
If fastboot is working then you are most likely able to fix it! cant give you any details since for some reason, you decided not to provide any details on your phone and what went wrong. now that you know you may be able to fix it, start doing some searches.
Thanks for the answer!
In fact I cannot push the package with adb: it does not recognize my device
Consequently I am not able to flash with fastboot.
Any way to push the files without adb?
Regards,
D.
you can try to copy the update.zip to your sdcard manually with an adapter via computer ...
Yes I tried, but no result, I put the recovery.img in the sdcard
when I run the fastboot I do:
fastboot boot boot.img
I receive
cannot load 'boot.img'
shakapaka said:
Dear Xda members,
I need your help,
My htc Magic has been damaged!
When I start it, nothing happens.
The recovery mode doesn t work: I can see it but just few seconds.
The fastboot is still working.
Is it possible to rescue my phone?
Many thanks in advance,
D.
Click to expand...
Click to collapse
you can try the attach files.
But please be sure your 32A is rooted, and non perfect SPL or original SPL.
convert at fastboot mode, download the four attach files
View attachment 292106
View attachment 292107
View attachment 292108
View attachment 292109
Thank you so much!
But how to use this?
shakapaka said:
Thank you so much!
But how to use this?
Click to expand...
Click to collapse
If you want to use 1.33SPL,then just in fastboot mode, unzip the attach file convert1.33.zip, enter the file, double click the convert.bat, press any key, wait for several mins, your SPL, radio and recovery will be flashed. Reboot in recovery mode flash your ROM(1.33SPL ROM). Before above steps, you should put your ROM on your SD card.
If you want to use 1.76SPL, do the same steps above.(1.76SPL ROM)
But when I try with 1..33
At every writing I have
'FAILED (remote: signature verify fail)'
If I try 1,76, is it dangerous?
shakapaka said:
But when I try with 1..33
At every writing I have
'FAILED (remote: signature verify fail)'
If I try 1,76, is it dangerous?
Click to expand...
Click to collapse
what is you SPL and radio?
shakapaka said:
But when I try with 1..33
At every writing I have
'FAILED (remote: signature verify fail)'
If I try 1,76, is it dangerous?
Click to expand...
Click to collapse
s-on or s-off?
On the fastboot I have:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0008
CLPD-12
RADIO-6.35.08.29
shakapaka said:
On the fastboot I have:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0008
CLPD-12
RADIO-6.35.08.29
Click to expand...
Click to collapse
Then you shoulde first flash your SPL to 1.33.2010 S-OFF, Radio 3.22.xx.
DON'T FORGET THE COMBINATION SPL 1.33.XX IS FOR RADIO 3.22.XX, SPL 1.76.XX IS FOR RADIO 6.35.XX.
Otherwise, you will brick.
OK, I have searched this. Probably you didn't unlock your bootloader. Boot your phone in fastboot mode. If your OS is windows, win + R, cmd, cd to your "convert1.33" folder. Then try the following code:
fastboot oem unlock
Click to expand...
Click to collapse
Then hit accept to throw out your warranty. This will also cause the signature check to stop failing, allowing you to fastboot flash recovery recovery.img
If this is done, double click convert(wether 1.33 or 1.76). Wait for several mins, job will be done.
If above steps don't work, maybe you need to make a gold card.
Thanks a lot Stuart!
I think my radio is not the original one.
What is better: use 1.76 and up-date the spl or use 1.33 and down-grade the spl?
In any case, how can I do that?
shakapaka said:
Thanks a lot Stuart!
I think my radio is not the original one.
What is better: use 1.76 and up-date the spl or use 1.33 and down-grade the spl?
In any case, how can I do that?
Click to expand...
Click to collapse
Use 1.33 should be better.
First, try this in fastboot mode, "fastboot oem unlock ".
Then double click convert in convert1.33 folder.
If it does not work, try to flash recovery(in the convert1.33 folder) in fastboot.
I have the same problem: My Phone:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009
CLPD-12
RADIO-3.22.20.17
I wanted to load cursor sense, but i have same problem: when i type fastboot flash hboot hbot-1.33.2010.img it says: FAILED (remote: signature verify fail), i've downloaded convert to1.33 files, CD'd to convert1.33 folder , tryed fastboot oem unlock but again, i get COMMAND ERROR.. Thanks
Hello Stuart,
I cannot unlock, it seems the commad does not exist.
I tried the gold card method, but I cannot find my microSD ID
I got some numbers from fsutil, maybe it could help?
Thanks
I've solved my problem... all you need to do is copy spl 1.33.2010 spl ZIPPED in your sd card root, go to recoverz and click on apply update.zip.. wait a second, then reboot..
In fact I do not have the recovery mode anymore
Dear Stuart,
It seems your are in Shanghai,
I am also living in Shanghai
Maybe you know some people to help me in town
Bye
shakapaka said:
In fact I do not have the recovery mode anymore
Dear Stuart,
It seems your are in Shanghai,
I am also living in Shanghai
Maybe you know some people to help me in town
Bye
Click to expand...
Click to collapse
Yes, I am in Shanghai. And are you Chinese or do you understand Chinese? If yes, I can communicate with you easily, for my english is not very good.
The combination of your SPL and Radio is strange. (1.33.xx with 3.22.xx, 1.76.xx with 6.35.xx). But you are 1.33.xx with 6.35.xx.
So, my idea is :
1. convert SPL 1.33.xx to 1.76.xx, or
2. convert Radio 6.35.xx to 3.22.xx
If above two methods are not available, you can try to make a gold card and use RUU to install offical ROM.
Otherwise, you can also go to Shanghai Railway Station. There is a "不夜城" market. You can find a place to repaire your phone(not recommended, maybe expensive). This is the last way.
i think i brick my phone...how when i power on,it only keeps on boot into htc magic...so is there any think i can do or?
Please can you provide more info.
It's like going to the doctor and saying the you feel pain and nothing else!
Do you have fastboot access?
Do you have recovery access?
What did you do before you phone went dead?
What model, radio,spl and rom do you have?
mumilover said:
Please can you provide more info.
It's like going to the doctor and saying the you feel pain and nothing else!
Do you have fastboot access?
Do you have recovery access?
What did you do before you phone went dead?
What model, radio,spl and rom do you have?
Click to expand...
Click to collapse
i dont have a fasboot & recovery access...
i root my phone with universal androot,using rom manager i successfully flash recovery,then i download rom..i kinda like want to look around the rom manager app and i accidentally press ok with the backup & clear cache?the phone start to restart and now i cant turn on my phone
my phone is...
HTC magic 32a s-on
hboot 1.76.0007
radio 6.35.07.29
its because of the perfected spl right?
From what I can see,with my limited experience, either you left out a part after "s-on", or your phone thinks its neither HTC nor google.
It should say S-ON H
And I dont think that 0007 is perfected.
But I'm a noob and would wait for mumilover to respond...
ekie84 said:
HTC magic 32a s-on
hboot 1.76.0007
radio 6.35.07.29
Click to expand...
Click to collapse
I want ALL fastboot info.
How did you get this info....
I don't believe that rom-manager has the power to **** up your fastboot.
Recovery and system, maybe - but not fastboot.
When you hold back-button and power-button together what do you see?
Write it down here or take a picture or what ever...
Can you see fastboot?
If you can't see anything beside flash screen then i can't help you!
TheBladeofFate said:
From what I can see,with my limited experience, either you left out a part after "s-on", or your phone thinks its neither HTC nor google.
It should say S-ON H
And I dont think that 0007 is perfected.
But I'm a noob and would wait for mumilover to respond...
Click to expand...
Click to collapse
yes it say s-on H
mumilover said:
I want ALL fastboot info.
How did you get this info....
I don't believe that rom-manager has the power to **** up your fastboot.
Recovery and system, maybe - but not fastboot.
When you hold back-button and power-button together what do you see?
Write it down here or take a picture or what ever...
Can you see fastboot?
If you can't see anything beside flash screen then i can't help you!
Click to expand...
Click to collapse
when i hold back+power (recovery) & hold menu+power (fastboot) nothing happen...all i can see is the "htc magic"
its ok then...i've email the service centre & their say if they can reflash the rom successfully their will charge me rm80
Similar Issue
Hey Guys and Girls,
This is my first time posting on this site. I have run into a similar issue and have attempted to post on numerous sites without having any luck solving the problem.
The quick version: I ran z4root to root my phone; it said successful. I then installed Rom Manager and switched my recovery to Clockwork (the most recent one). Next I downloaded the latest CM6 from the Rom Manager with GApps. After having unsuccessful attempts at backing up and wiping first, I decided to try installing the Rom without backing up or wiping data. The Rom install worked this time (I got installation successful). However, when the phone rebooted itself, it never got past the Rogers screen. It is now in a constant state of rebooting until I pull the battery.
I can get to fastboot, but cannot get to the recovery screen. My HTC Magic 32A specs from the fastboot menu are:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAP50000)
CPLD-12
RADIO-6.35.16.19
Some other info that may help:
-my PC recognizes my phone (I have been trying the Radio Switcher v.GUI 4.1 and it says the phone is connected) but it is not allowing me to flash anything.
-When I try "adb devices" it gives error: no device attached but "fastboot devices" gives me a number.
-I have tried putting "recovery-RA-sapphire-v1.7.0H" on my sdcard, but the HBoot says no image or wrong image
-The Radio Switcher v.GUI 4.1 says my phone is not rooted
-I tried the goldcard method of rooting, but because I can't get the phone to recognize the sdcard, I can't get a proper CID for the goldcard creator
Hopefully I've provided enough info to get some help. I am waiting patiently, but am starting to get sick of the old Sony Ericsson Anything helps!
Run this 2 commands in fastboot and post here the ourput.
Code:
fastboot oem h
fastboot getvar version-main
Here is the info you required.
C:\AndroidSDK\platform-tools>fastboot oem h
... INFOcommand list
INFOkeytest
INFOheap
INFOboot
INFOreset
INFOpowerdown
INFOrebootRUU
INFOtask
INFOenableqxdm
INFOrtask
OKAY [ 0.009s]
finished. total time: 0.009s
C:\AndroidSDK\platform-tools>fastboot getvar version-main
version-main: 3.54.631.3
finished. total time: 0.001s
run this command to activate the sdcard:
Code:
fastboot oem enableqxdm 1
You have to make a goldcard... if you can't make it using your device, then do it using any other android device.
When you have made the goldcard come back here, and i'll guide through the rest :0)
Done. I made a gold card previously...hopefully it still works. Once it's made into a goldcard, is it always a goldcard?
Actually... re-checking your info - you don't need a goldcard..
No need for sdcard either...
Download this sappimg.zip :
http://rapidshare.com/files/437924840/sappimg.zip
Then run this command from a command prompt:
Code:
fastboot flash zip sappimg.zip
Make sure that the sappimg.img is in the same folder as fastboot.exe
The sappimg.zip is the newest rogers update... the same version as you currently have...
No need for goldcard or anything :0)
if you get any troubles, then post here the outcome of the command prompt..
When all is done, you should be back on stock 2.1...
From there you follow my guide (check my signature) to root and get custom recovery.
Good luck
hi guys,
i got the same problem, here im my country nobody knows how to solve (im from brazil)
when a tryed to updade with sapping file, in the radio part, the screen became dark, then white.
now I can get to fastboot, but cannot get to the recovery screen. My HTC Magic 32A specs from the fastboot menu are:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.008 (SAP60000)
CPLD-12
RADIO-3.22.20.17
my PC recognizes my phone but it is not allowing me to flash anything.
When I try "adb devices" it gives error: no device attached but fastboot command works fine.
i have my first goldcard.
this forum is my last hope... if anyone know how to proced, help me pls
I had the same problem as a few of you and after trying everything I eventually decided to try installing SAPPIMG.zip from hboot and it worked fine. Took me a while to find the correct SAPPIMG but you should be able to find it on the forums here. You have to put the SAPPIMG.zip on the root of your SD card from your computer, put it in the phone, boot into fastboot and go into hboot and it'll load the SAPPIMG file. If you have the wrong SAPPIMG it'll usually give you an error when trying to install it'll say someting like update failed or wrong device ID. It took me about 4-5 different SAPPIMG to find the correct one for my phone.
Hey,
This is the info from my command prompt:
C:\AndroidSDK\platform-tools>fastboot flash zip sappimg.zip
sending 'zip' (110447 KB)... FAILED (remote: not allow)
finished. total time: 0.002s
The phone starts the box with the arrow and then after a few seconds it shutdowns
Dear Mumi,
Dear All Please help me...
my htc magic white before flashed is :
RUU_Sapphire_Rogers_WWE_2.17.631.2_release_signed_ NoDriver
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jun 2 2009, 17:28:28
Root build RA-sapphire-v1.6.2H
After Flashing and update both of radio and SPL
RUU_Sapphire_HTC_Asia_WWE_3.03.728.4_SEA_release_s igned_NoDriver
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0007 (SAPP10000)
CPLD-12
RADIO-6.35.07.29
Aug 4 2009, 19:43:30
At the time My HTC Magic is working, but I can't root and also in the ROM it self missing android market.
then installed Universal androd and working...Last night i just tried to factory reset and The phone starts the box with the arrow and then after a few seconds it shutdowns, any idea to get in fastboot or just make HTC start normally
Thank in advance
cj.smith14 said:
Hey,
This is the info from my command prompt:
C:\AndroidSDK\platform-tools>fastboot flash zip sappimg.zip
sending 'zip' (110447 KB)... FAILED (remote: not allow)
finished. total time: 0.002s
Click to expand...
Click to collapse
Hmm... try this:
Code:
fastboot oem rebootRUU
The above will set the device into RUU mode.
Then download the official rogers RUU..
Run it and it should install just fine... no need for goldcard or sdcard..
I hope this will work.
atrix.suhendra said:
....
Click to expand...
Click to collapse
fastlan said:
.....
Click to expand...
Click to collapse
Please start your own thread or else the OP will loose his opportunity to get proper help!
I will try to help where i can :0)
Hey,
I just wanted to say I appreciate all the time you are putting in to helping me. I just did the RUU install, but once it gets to the updating signature part I get:
ERROR [132]: SIGNATURE ERROR
The ROM Update Utility cannot update your android phone.
Ok Guys, I know there are probably millions of threads already started about this, but I really dont know how to put it.
Not long ago I flashed the official 2.2 ROM, and tried to flash DSP manager over it. It didnt work. I couldnt boot into the rom, I had a weird SPL and radio and stock recovery. I made a goldcard, downloaded a SAPPHIMG.nbh file from god knows where, and started again. I have a horrible feeling it might of been the rogers 32A rom.
BUT, I am now stuck on 1.5, Rooted with Super One Click and I cant boot into recovery at all. I cant flash recovery through Clockworkmod, or FlashRec. It flashes it, I just can't boot into the recovery at all! I can't even do it through fastboot, because of my perfected stock SPL. A goldcard doesn't help either, I just keep getting errors. Is it possible to corrupt your recovery partition?
RADIO: 3.22.20.17
CPLD: 10
HBOOT: 1.33.0009
I feel like I'm in a really horrible situation here, but I'm glad its not fully bricked. What Solutions are there to this problem?
Thank you so much guys! I really appreciate your help, in advance
EDIT: I can use fastboot, But I still cant boot recovery, even after flashing it from there. Can I just flash a rom through Fastboot?
Well... you have to flash the right recovery...
Follow my root guide( check my signature).
Just jump the androot part of it (you already have root you say).
Flash both the recovery and eng spl.
Once the recovery and spl is all good (and you have s-off in fastboot) you should flash the right radio. I belive it's 2.22.19.26I.
Then reboot and check your fastboot info.
You should have something like this:
Sapphire pvt 32B eng s-off
Hboot 1.33.2010
CPLD: 10
Radio 2.22.19.26I
Now, flash any 32B rom and you should be good to go!
Good luck.
mumilover said:
Well... you have to flash the right recovery...
Follow my root guide( check my signature).
Just jump the androot part of it (you already have root you say).
Flash both the recovery and eng spl.
Once the recovery and spl is all good (and you have s-off in fastboot) you should flash the right radio. I belive it's 2.22.19.26I.
Then reboot and check your fastboot info.
You should have something like this:
Sapphire pvt 32B eng s-off
Hboot 1.33.2010
CPLD: 10
Radio 2.22.19.26I
Now, flash any 32B rom and you should be good to go!
Good luck.
Click to expand...
Click to collapse
That would be good, If I didnt just wipe the system via fastboot thinking I could just flash another rom..
Ok... then flash the recovery using fastboot...
How come you can erase partitions using the fastboot?
mumilover said:
Ok... then flash the recovery using fastboot...
How come you can erase partitions using the fastboot?
Click to expand...
Click to collapse
I Followed this guide.. http://www.firstdroid.com/tutorials/htc-magic-sapphire-tutorials-htc-magic-sapphire-guias/how-to-load-a-rom-with-fastboot/comment-page-1/#comment-3486 I get a error saying the recovery isn't signed. Latest version of Amon RA.
Well that's because you have a perfected spl...It will not allow you to flash anything from fastboot.
You have to get access to the system again. Just flash a completable RUU for your device.
When you get your system back again, then use my guide to root and get custom recovery(check my signature).
mumilover said:
Well that's because you have a perfected spl...It will not allow you to flash anything from fastboot.
You have to get access to the system again. Just flash a completable RUU for your device.
When you get your system back again, then use my guide to root and get custom recovery(check my signature).
Click to expand...
Click to collapse
Ok, will try that
ketchup539 said:
Ok, will try that
Click to expand...
Click to collapse
Ok, Tried flashing an RUU, would't let me, because the phone had to be switched on and booted into android to do so. I have tried the goldcard more than 8 times, either to get a "main version is older" or "invalid CID" message. What else can I do? Have I effectively bricked my phone?
NO.. you have not bricked you phone.. when you do brick it, believe me, you will know!
You have a faulty goldcard... redo it... you should not get invalid CID!
Main version older, maybe... but not invalid CID... that's is the point with goldcard... to avoid CID checks :0)
Type this in fastboot:
Code:
fastboot getvar version-main
Post here the outcome!
Can you also please change the title... it's not that urgent :0)
mumilover said:
NO.. you have not bricked you phone.. when you do brick it, believe me, you will know!
You have a faulty goldcard... redo it... you should not get invalid CID!
Main version older, maybe... but not invalid CID... that's is the point with goldcard... to avoid CID checks :0)
Type this in fastboot:
Code:
fastboot getvar version-main
Post here the outcome!
Click to expand...
Click to collapse
This is the outcome of the above command:
clients:tools pjamessteven$ ./fastboot getvar version-mainversion-main: 2.16.151.1
So, Is there any way to fix "main version is older"?
I must of (finally) got a working goldcard, because I'm no longer getting invalid CID errors.
same boat maybe different scenary, stuck RUU or RUU USB:
Code:
SAPPHIRE PVT 32A ENG S-ON H
HBOOT-1.76.0008 (SAPP60000)
CPLD-12
RADIO-3.22.20.17
NOV. 3 2009,15:56:29
C:\roottools\windows>fastboot getvar version-main
version-main: 3.03.527.3_R
finished. total time: 0.000s
Can´t flash, maybe there is a solution, but I haven´t found it.
ketchup539 said:
This is the outcome of the above command:
clients:tools pjamessteven$ ./fastboot getvar version-mainversion-main: 2.16.151.1
So, Is there any way to fix "main version is older"?
I must of (finally) got a working goldcard, because I'm no longer getting invalid CID errors.
Click to expand...
Click to collapse
Well... the problem is that you used a 32A sappimg.zip to update your device with.
The newest RUU for the 32B device is 1.91.177.1....
So you in a not so good a situation. You cannot use the goldcard to update back in main-version (the good old main-version-older error).
I have no idea how you can get your self out of this.. i will wait until a new RUU for the 32B device is available... is should be that long... there is the 2.2 update... no still no RUU!!!
If you have any way to boot into custom recovery or the similar we can fix it... not before.
meupc said:
same boat maybe different scenary, stuck RUU or RUU USB:
SAPPHIRE PVT 32A ENG S-ON H
HBOOT-1.76.0008 (SAPP60000)
CPLD-12
RADIO-3.22.20.17
NOV. 3 2009,15:56:29
C:\roottools\windows>fastboot getvar version-main
version-main: 3.03.527.3_R
finished. total time: 0.000s
Can´t flash, maybe there is a solution, but I haven´t found it.
Click to expand...
Click to collapse
You have a different problem... you have wrong spl/radio combo.
But maybe i will test something. Check your pm!
OK, thanks mumilover, replied and added.
mumilover said:
Well... the problem is that you used a 32A sappimg.zip to update your device with.
The newest RUU for the 32B device is 1.91.177.1....
So you in a not so good a situation. You cannot use the goldcard to update back in main-version (the good old main-version-older error).
I have no idea how you can get your self out of this.. i will wait until a new RUU for the 32B device is available... is should be that long... there is the 2.2 update... no still no RUU!!!
If you have any way to boot into custom recovery or the similar we can fix it... not before.
Click to expand...
Click to collapse
Fixed! I was on a 32A sappimg.nbh, flashed 2.53.707.2 sappimg.zip which was also 32A, but it booted (!) and from there I was able to flash the original mytouch COC10 cupcake. I ugraded to donut, then flashed the official 2.2 OTA
Thanks for your help
Hi to all! Sorry for my bad english!
I have a big problem with my Magic 32A. It can't boot (it stay on the splash screen when I try to boot), it can only go in fastboot and stock recovery. I have this words in bootloader:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP10000)
CPLD-12
RADIO-2.22.28.25
Oct 21 2009, 22:33:27
FASTBOOT
<VOL DOWN> HBoot Mode
<SEND> Reset Device
<ACTION> Restart to HBoot
<MENU> Power Down
When I try to flash the engineering spl or a custom recovery or only boot into a custom recovery, it give always the same error:
"REMOTE: NOT ALLOW"
I read that someone used a goldcard but i don't now what is it and however I can't do one because I can't use any ADB commands (phone doesn't boot).
I read also that to solve my problem you need to know the version-main and the CID; these are mine:
version-main: 1.88.531.1
CID:TIM__401
So I can't do anything (the fastboot commands don't work because they give me the error remote:not allow) and I'm disperate! I hope someone will help me...Please write in this thread only if you can help me
Fede
Yo... got your pm.
It's always better to search or start a new thread... this way, my help is visible to everybody and all can benefit from it. All help over pm is lost and is a shame if anybody else is in the same problem.
The fix:
Download this file:https://rapidshare.com/files/191906182/2.15.901.4.zip
Download my fastboot commander tool found in my signature (not the magic version)
Using the tool, flash the file using the "Full zip" tab and do so inside fastboot mode.
It can take some time to finish....
Once done you should be back to stock 2.15.901.4 TIM Italy rom.
From there, follow my root guide which is found in my signature...
Good luck
Hi Mumilover!! Thank you a lot for you help but i can't boot yet. Fastboot Commander give me:
###Calling fastboot with: getvar version-baseband###
********************************
###Calling fastboot with: flash zip C:\Users\Fede\Downloads\2.15.901.4.zip###
********************************
Flashing "zip" - PLEASE WAIT.
Status of zip flash can only be seen on the "Actual-Output" tab!.
Did i do something wrong? i did what you said to me.
Please
nothing is wrong... it's gona take around 5 min to finish... All good
I have renamed the zip "sappimg" and i have applied it by hboot mode...it works!! Thank ou a lot Mumilover!! You saved me
No problem...
My phone name is HTC magic:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0004 (SAP1000)
CPLD-10
RADIO-2.22.19.261
Aug 4 2009, 23:43:40
When start can see HIAPK logo on screen
I was up wrong rom but when start can see recovery boot và fastboot.
Now up every rom to the
Installing update...
E: Can't find update scrip
Installation aborted.
How I do fix this problem?
Sorry i am a newbe and speak english not good.
Thank you so much
Who have original rom please give me please.
Thank alot.
Who can help me??????
fastboot getvar cidnum
This command shows cid from phone. With cid you can choose rom that is for your phone (look at rom collection in developer forum)
Sent from my A7-040 using Tapatalk
Thanks for help. As you say I up another rom the notice CID wrong. This rom i get from RUU rom. Please guide for me.
Thank so much
winball said:
Thanks for help. As you say I up another rom the notice CID wrong. This rom i get from RUU rom. Please guide for me.
Click to expand...
Click to collapse
1. What do you want? Official or custom rom?
2. Is SPL-info in first post correct? Did you change it?
3. Load phone into fastboot, connect to PC, then run from PC:
Code:
fastboot getvar main-version
This command shows you current rom version. Please write it.
Then run
Code:
fastboot getvar cidnum
or
Code:
fastboot getvar cid
to get current CID
write them too
p.s. Create Goldcard (just in case)
5[Strogino] said:
1. What do you want? Official or custom rom?
2. Is SPL-info in first post correct? Did you change it?
3. Load phone into fastboot, connect to PC, then run from PC:
Code:
fastboot getvar main-version
This command shows you current rom version. Please write it.
Then run
Code:
fastboot getvar cidnum
or
Code:
fastboot getvar cid
to get current CID
write them too
p.s. Create Goldcard (just in case)
Click to expand...
Click to collapse
Thank so much, I understood, thanks again.