Dear Xda members,
I need your help,
My htc Magic has been damaged!
When I start it, nothing happens.
The recovery mode doesn t work: I can see it but just few seconds.
The fastboot is still working.
Is it possible to rescue my phone?
Many thanks in advance,
D.
If fastboot is working then you are most likely able to fix it! cant give you any details since for some reason, you decided not to provide any details on your phone and what went wrong. now that you know you may be able to fix it, start doing some searches.
Thanks for the answer!
In fact I cannot push the package with adb: it does not recognize my device
Consequently I am not able to flash with fastboot.
Any way to push the files without adb?
Regards,
D.
you can try to copy the update.zip to your sdcard manually with an adapter via computer ...
Yes I tried, but no result, I put the recovery.img in the sdcard
when I run the fastboot I do:
fastboot boot boot.img
I receive
cannot load 'boot.img'
shakapaka said:
Dear Xda members,
I need your help,
My htc Magic has been damaged!
When I start it, nothing happens.
The recovery mode doesn t work: I can see it but just few seconds.
The fastboot is still working.
Is it possible to rescue my phone?
Many thanks in advance,
D.
Click to expand...
Click to collapse
you can try the attach files.
But please be sure your 32A is rooted, and non perfect SPL or original SPL.
convert at fastboot mode, download the four attach files
View attachment 292106
View attachment 292107
View attachment 292108
View attachment 292109
Thank you so much!
But how to use this?
shakapaka said:
Thank you so much!
But how to use this?
Click to expand...
Click to collapse
If you want to use 1.33SPL,then just in fastboot mode, unzip the attach file convert1.33.zip, enter the file, double click the convert.bat, press any key, wait for several mins, your SPL, radio and recovery will be flashed. Reboot in recovery mode flash your ROM(1.33SPL ROM). Before above steps, you should put your ROM on your SD card.
If you want to use 1.76SPL, do the same steps above.(1.76SPL ROM)
But when I try with 1..33
At every writing I have
'FAILED (remote: signature verify fail)'
If I try 1,76, is it dangerous?
shakapaka said:
But when I try with 1..33
At every writing I have
'FAILED (remote: signature verify fail)'
If I try 1,76, is it dangerous?
Click to expand...
Click to collapse
what is you SPL and radio?
shakapaka said:
But when I try with 1..33
At every writing I have
'FAILED (remote: signature verify fail)'
If I try 1,76, is it dangerous?
Click to expand...
Click to collapse
s-on or s-off?
On the fastboot I have:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0008
CLPD-12
RADIO-6.35.08.29
shakapaka said:
On the fastboot I have:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0008
CLPD-12
RADIO-6.35.08.29
Click to expand...
Click to collapse
Then you shoulde first flash your SPL to 1.33.2010 S-OFF, Radio 3.22.xx.
DON'T FORGET THE COMBINATION SPL 1.33.XX IS FOR RADIO 3.22.XX, SPL 1.76.XX IS FOR RADIO 6.35.XX.
Otherwise, you will brick.
OK, I have searched this. Probably you didn't unlock your bootloader. Boot your phone in fastboot mode. If your OS is windows, win + R, cmd, cd to your "convert1.33" folder. Then try the following code:
fastboot oem unlock
Click to expand...
Click to collapse
Then hit accept to throw out your warranty. This will also cause the signature check to stop failing, allowing you to fastboot flash recovery recovery.img
If this is done, double click convert(wether 1.33 or 1.76). Wait for several mins, job will be done.
If above steps don't work, maybe you need to make a gold card.
Thanks a lot Stuart!
I think my radio is not the original one.
What is better: use 1.76 and up-date the spl or use 1.33 and down-grade the spl?
In any case, how can I do that?
shakapaka said:
Thanks a lot Stuart!
I think my radio is not the original one.
What is better: use 1.76 and up-date the spl or use 1.33 and down-grade the spl?
In any case, how can I do that?
Click to expand...
Click to collapse
Use 1.33 should be better.
First, try this in fastboot mode, "fastboot oem unlock ".
Then double click convert in convert1.33 folder.
If it does not work, try to flash recovery(in the convert1.33 folder) in fastboot.
I have the same problem: My Phone:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009
CLPD-12
RADIO-3.22.20.17
I wanted to load cursor sense, but i have same problem: when i type fastboot flash hboot hbot-1.33.2010.img it says: FAILED (remote: signature verify fail), i've downloaded convert to1.33 files, CD'd to convert1.33 folder , tryed fastboot oem unlock but again, i get COMMAND ERROR.. Thanks
Hello Stuart,
I cannot unlock, it seems the commad does not exist.
I tried the gold card method, but I cannot find my microSD ID
I got some numbers from fsutil, maybe it could help?
Thanks
I've solved my problem... all you need to do is copy spl 1.33.2010 spl ZIPPED in your sd card root, go to recoverz and click on apply update.zip.. wait a second, then reboot..
In fact I do not have the recovery mode anymore
Dear Stuart,
It seems your are in Shanghai,
I am also living in Shanghai
Maybe you know some people to help me in town
Bye
shakapaka said:
In fact I do not have the recovery mode anymore
Dear Stuart,
It seems your are in Shanghai,
I am also living in Shanghai
Maybe you know some people to help me in town
Bye
Click to expand...
Click to collapse
Yes, I am in Shanghai. And are you Chinese or do you understand Chinese? If yes, I can communicate with you easily, for my english is not very good.
The combination of your SPL and Radio is strange. (1.33.xx with 3.22.xx, 1.76.xx with 6.35.xx). But you are 1.33.xx with 6.35.xx.
So, my idea is :
1. convert SPL 1.33.xx to 1.76.xx, or
2. convert Radio 6.35.xx to 3.22.xx
If above two methods are not available, you can try to make a gold card and use RUU to install offical ROM.
Otherwise, you can also go to Shanghai Railway Station. There is a "不夜城" market. You can find a place to repaire your phone(not recommended, maybe expensive). This is the last way.
Related
Applied the latest Rogers ROM...what a bad move...
Now my HTC Magic got stuck in RUU screen showing the following:
SAPPHIRE UNKNOWN 32A SHIP S-OFF H
HBOOT-1.76.0010 (SAPP50000)
CPLD-11
RADIO-6.35.10.18
Jan 14 2010, 00:14:58
RUU
I tried many ways to get rid of this screen but didn't work.
My phone original has the rogers 2.17.631.2 build, and I did a bad move to upgrade to Android 1.5.=( The RUU process flashed my HBOOT and RADIO, but as soon as it starts the "system" steps, the screen shows unzipping for over an hour and eventually failed. Now my phone will start up with the above screen only!! i can't get myphone startup in recovery mode or fastboot mode.
I tried re-run the RUU porgram on my PC and the tool still shows i have the old anroid build. Hence i know that i now have NEW HBOOT and RADIO but still the old Android build.
Is there a way for me to get out of this RUU screen? Any help is appreciated.
Is the security off (S-OFF) allows me to downgrade the SPL? If so, how can i do that given i can only boot my HTC Magic in this screen only.
One more side note, fastboot can detect the phone.
Urgently need help! Appreciated.
If you have constant security S-OFF, it accepts all ROMs and HBoot and RUU. Probably you have engineering Magic (not Hboot, the whole device)
1. Try this...
If fastboot can detect phone, so try flash Amon_RA Hero recovery http://forum.xda-developers.com/showthread.php?t=561124
fastboot flash recovery recovery.img
(recovery.img or other filename must be in folder with fastboot.exe)
Then start into recovery (Home + Power) and flash CursorSense
If you need original ROM (without root), so search forum for it
(it has been posted already). Just get rom1.zip (system.img, userdata.img and more...) and flash it (Saying again: official doesn't contain root)
2. Or try run another RUU
5[Strogino] said:
Oh... you have S_OFF after official upgrade, it isn't often to meet.
If fastboot can detect phone, so try flash Amon_RA Hero recovery
fastboot flash recovery recovery.img
(recovery.img or other filename must be in folder with fastboot.exe)
Then start into recovery (Home + Power) and flash CursorSense
If you need original ROM (without root), so search forum for it
(it has been posted already). Just get rom1.zip (system.img, userdata.img and more...) and flash it (Saying again: official doesn't contain root)
Click to expand...
Click to collapse
but the fastboot method requires engineering SPL, but my phone was upgraded to the perfected SPL. Shall I try the RA_Hero or RA_Sapphire ?
ngecw said:
but the fastboot method requires engineering SPL, but my phone was upgraded to the perfected SPL. Shall I try the RA_Hero or RA_Sapphire ?
Click to expand...
Click to collapse
Yes, common fastboot required to be engineering. But you have S-OFF now, so no checks.
use RA_Hero, cause you have radio 6.35.X.X
5[Strogino] said:
Yes, common fastboot required to be engineering. But you have S-OFF now, so no checks.
use RA_Hero, cause you have radio 6.35.X.X
Click to expand...
Click to collapse
Tried flashing the recovery.img (RA_Hero) but failed.
i typed fastboot flash recovery recovery.img [ renamed the file to recovery.img] but got the error...
sending 'recovery' <3362 KB>... OKAY
writing 'recovery'... FAILED <remote: image type not support>
Just to clarify more, the screen only shows "RUU USB" not "FASTBOOT" although fastboot can see my device... could that be the reason why it failed?
According to your 2nd suggestion, where can i find other RUU and how do i know which is the proper one?
ngecw said:
Applied the latest Rogers ROM...what a bad move...
Now my HTC Magic got stuch in RUU screen showing the following:
SAPPHIRE UNKNOWN 32A SHIP S-OFF H
HBOOT-1.76.0010 (SAPP50000)
CPLD-11
RADIO-6.35.10.18
Jan 14 2010, 00:14:58
RUU
I tried many ways to get rid of this screen but didn't work.
My phone original has the rogers 2.17.631.2 build, and I did a bad move to upgrade to Android 1.5.=( The RUU process flashed my HBOOT and RADIO, but as soon as it starts the "system" steps, the screen shows unzipping for over an hour and eventually failed. Now my phone will start up with the above screen only!! i can't get myphone startup in recovery mode or fastboot mode.
I tried re-run the RUU porgram on my PC and the tool still shows i have the old anroid build. Hence i know that i now have NEW HBOOT and RADIO but still the old Android build.
Is there a way for me to get out of this RUU screen? Any help is appreciated.
Is the security off (S-OFF) allows me to downgrade the SPL? If so, how can i do that given i can only boot my HTC Magic in this screen only.
One more side note, fastboot can detect the phone.
Urgently need help! Appreciated.
Click to expand...
Click to collapse
the rogers ROM is not working right. Too many crashes and so on .. so try this one
RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver.exe
You can download it from HTC main site ...
Also, you have to keep in mind that you can RUU as many as you want. So do the procedure again and keep us posted if it's working. If not send me a PM and i'll resolve it step by step.
best of luck !
I have one Magic and it show in Bootloader :
PVT 32 S-OFF
1.76.0007 (SAPP*****).
Why the SAPP is SAPP*****? Is there something wrong?
Also, the device detected by fastboot is 1234567890... , not like other HTC Magic.
Now I get stuck with RUU Flash at 81% (Hong Kong RUU). --> When the device start to update system STEP. So the Magic now just show RUU, can connect by Fastboot but when use fastboot flash system or recovery, only can send to phone and write error.
Anybody help me to solve this?
ntphuong said:
I have one Magic and it show in Bootloader :
PVT 32 S-OFF
1.76.0007 (SAPP*****).
Why the SAPP is SAPP*****? Is there something wrong?
Also, the device detected by fastboot is 1234567890... , not like other HTC Magic.
Now I get stuck with RUU Flash at 81% (Hong Kong RUU). --> When the device start to update system STEP. So the Magic now just show RUU, can connect by Fastboot but when use fastboot flash system or recovery, only can send to phone and write error.
Anybody help me to solve this?
Click to expand...
Click to collapse
I do have the same problem with my RUU flash with the new Rogers RUU. Stuck at 81% when device starts updating at step[4] "system". Phone will show "unzipping" for over an hour and eventually failed with error code [155].
I tried the RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_ NoDriver.exe but still the same problem. Can anyone help here?
Did more investigation, and seems like both RUU ROMs i tried might not match the CID, hence the system ROM updating failed.
Now the question is, i am stuck in RUU and cannot use adb to check my CID now. How can i manually update the system ROM given i am in RUU mode only?
How can i manually update the HBOOT and RADIO if i am stuck in RUU screen? If the RUU program can automate the process in one click, is there program to allow me to update each individually? Note that i cannot get into fastboot mode.
Any advice? Thanks!
Help
ngecw said:
Did more investigation, and seems like both RUU ROMs i tried might not match the CID, hence the system ROM updating failed.
Now the question is, i am stuck in RUU and cannot use adb to check my CID now. How can i manually update the system ROM given i am in RUU mode only?
How can i manually update the HBOOT and RADIO if i am stuck in RUU screen? If the RUU program can automate the process in one click, is there program to allow me to update each individually? Note that i cannot get into fastboot mode.
Any advice? Thanks!
Click to expand...
Click to collapse
Same problem here. Can someone help?
Thanks in advance.
ntphuong said:
I have one Magic and it show in Bootloader :
PVT 32 S-OFF
1.76.0007 (SAPP*****).
Why the SAPP is SAPP*****? Is there something wrong?
Also, the device detected by fastboot is 1234567890... , not like other HTC Magic.
Now I get stuck with RUU Flash at 81% (Hong Kong RUU). --> When the device start to update system STEP. So the Magic now just show RUU, can connect by Fastboot but when use fastboot flash system or recovery, only can send to phone and write error.
Anybody help me to solve this?
Click to expand...
Click to collapse
I had a 32B G2,it was brikked at the first time when I ruu flash the rom(Sense official). G2 couldn't received any RUU rom.it would stop at 22%.
Today,when I ruu flash the rom（HTC_Europe_3.04.401.2）,I also found it stop at 81%.
SPL is updated to 1.76.0008 from 1.76.0007.
It seems much better than before. But it still could not accept the cmd "adb shell"
Hoping somebody could help us.
I used the following RUU after upgrading to sense RUU stopped at 81%
hxxp://suntharee.com/android/RUU_Sapphire_HTC_Asia_WWE_2.53.707.2_SEA_test_sign ed_NoDriver.exe
Here is another link, its the first RUU in this post:
hxxp://forum.xda-developers.com/showthread.php?t=548096
You will end up with an ENG SPL that allows you to flash what ever you want then.
I manually updated Radio and SPL and now using CursorSense ROM.
Obviously replace the "hxxp" with "http". Hope it helps at least some of you like it did for me.
Rugga said:
I used the following RUU after upgrading to sense RUU stopped at 81%
hxxp://suntharee.com/android/RUU_Sapphire_HTC_Asia_WWE_2.53.707.2_SEA_test_sign ed_NoDriver.exe
Here is another link, its the first RUU in this post:
hxxp://forum.xda-developers.com/showthread.php?t=548096
You will end up with an ENG SPL that allows you to flash what ever you want then.
I manually updated Radio and SPL and now using CursorSense ROM.
Obviously replace the "hxxp" with "http". Hope it helps at least some of you like it did for me.
Click to expand...
Click to collapse
I tried but already got stuck in the first step of unzipping system.img. Looks like this RUU will upgrade system first before HBOOT and RADIO, hence i am still stuck with Perfected SPL.
Given that my phone has security off (SOFF), is there way to downgrade my HBOOT?
I had the same problem when HK SenseUI appeared and I managed to pass the RUU screen with a gold-card. You will find tutorials in this forum.
Good luck!
vbucuroiu said:
I had the same problem when HK SenseUI appeared and I managed to pass the RUU screen with a gold-card. You will find tutorials in this forum.
Good luck!
Click to expand...
Click to collapse
Were you upgraded to the latest perfected SPL when the same problem happens? I had my goldcard configured properly, but everytime i run RUU, the process hang at 81%, which is the time when unzipping system.img happens.
I understanding the latest SPL is still yet hard to crack, but will my phone being S=OFF, can have some ways to get the system check bypassed?
Thanks!
Hi. I have the some problem. My magic stops at 81% (system - unzipping), or when i try with another RUU_.exe stops at 22% (system - unzipping).
S-ON.
Anyone can help us?
PS: Sorry for my english.
(
Nobody knows?
ONX said:
Nobody knows?
Click to expand...
Click to collapse
Same boat...
ONX said:
Hi. I have the some problem. My magic stops at 81% (system - unzipping), or when i try with another RUU_.exe stops at 22% (system - unzipping).
S-ON.
Anyone can help us?
PS: Sorry for my english.
Click to expand...
Click to collapse
What did you do??? 32B Magic not compatible with RUU Upgrades
What exactly do you have? You posted in one place - that you have 32B
But on picture you have 32A
I installing RUU_Sapphire_HTC_Europe_3.05.401.3_release_signed_NoDriver.exe
I make a goldcard for installing _HTC Magic_RUU_Sapphire_SMC_Voda_WWE_3.03.990.6_release_signed_NoDriver.exe (with this update can enter in fastboot and vol down + power) but stops when loading system.img
Sorry for my english.
Yes, i have 32B.
Before:
SAPPHIRE PVT 32B Ship S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD 10
RADIO-3.22.20.17
Jun 2 2009 17.28.28
After:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.007 (SAPP10000)
CPLD-10
RADIO-6.35.07.29
Aug 4 2009, 19:43:30
SAPPHIRE UNKNOWN 32A SHIP S-ON G
HBOOT-1.33.0006 (SAPP50000)
CPLD-12
RADIO-2.22.23.02
I flashed the 2.22.23.02 through fastboot by mistake and now I can't get into recovery mode, or flash any other radios onto the phone. The fastboot menu is the only thing I can get to on the phone.
I tried reflashing the 2.22.23.02 again but it won't go through...
Anyone have any ideas on what I can do to unbrick it?
Edit: Tried sappimg.nbh via volume down and power button but i get a Model ID error. Now i can't fastboot anything over to my phone.
Edit: Flashed the sappimg.nbh, sappimg 2.16.707.3, sappimg 2.53.707.2, via gold card but I now get the error: Main Version is older!
I have answered similar questions before...
Use the search function.
But to get you started here is a quick solution.
1) flash eng spl that starts with 1.33.20XX where XX can be 05,09 or 10.
Restart into fastboot.
2) flash the right spl/radio/recovery combo.
This is confirmed to work....
Next time post ALL fastboot info... there are some info mission in your post!
all the fastboot info...
SAPPHIRE UNKNOWN 32A SHIP S-ON G
HBOOT-1.33.0006 (SAPP50000)
CPLD-12
RADIO-2.22.23.02
I have just tried flashing hboot-1.33.2010 via fastboot.
However, I get the error message:
sending 'hboot' (512 KB)... FAILED (remote: not allow)
do this:
----- If you boot into fastboot and have issues with "fastboot:remote not allow", then your SPL won't work. Upgrade to Engineering SPL before continuing.
----- If you do not have an Engineering SPL, download 1.33.2010 and flash through recovery before starting this procedure. Flash the SPL update.zip like any other update.zip file.
in http://forum.xda-developers.com/showthread.php?t=605239
Unfortunately... I can't boot into recovery either, nor can i push a recovery image to the phone. I get the same error: "fastboot:remote not allow".
ok... you are very limited...
Do this:
Find a suitable sappimg.nbh... Not sappimg.zip...
Use this which i just uploaded for you:
http://rapidshare.com/files/421772202/SAPPIMG.nbh
Using your goldcard flash the sappimg.nbh in fastboot.
The sappimg.nbh does not need any unzipping... it's a complete img of the nand and overwrites everything.
I can't seem to find the answer to this anywhere....
is there a way to create a goldcard at this point for me?
I can't get into debug mode on the phone (for obvious reasons) and therefore can't do adb....
Find ANY android device and make a goldcard...
Then use the goldcard on your device...
wouldn't suppose anyone have the goldcard.img from their email that they could send me...
1)Download the -G magic RA recovery
2) rename it to recoveryG.img
3) run 'fastboot boot recoveryG.img' (with the phone in fastboot mode)
4) allow recovery to boot then run the following adb commands
Code:
adb push recoveryG.img /tmp/recoveryG.img
adb flash_image recovery /tmp/recoveryG.img
5) Now power down the phone
6) boot into recovery by holding home+power
10) flash 1.33.2009 or 1.33.2010
Now you will have fastboot again
Most likely you will want to find and flash via fastboot radio 3.22.20.17 if you are not a Rogers/Fido customer or have signed the e911 wavier, otherwise you want 3.22.26.17..
After flashing the 3.x radio flash RA -h recovery via fastboot (and while in fastboot run 'fastboot erase system -w'); this will let you flash the ebi1 rom of choice
I just downloaded the recovery-RA-sapphire-v1.7.0G.img
renamed it so recoveryG.img.
When i try to run the command: fastboot boot recoveryG.img
I get the error message:
downloading 'boot.img'...FAILED (remote: not allow)
Then its best to just install the official e911 ruu from rogers and re-root
I have tried that, but it doesn't work...
What's your fastboot info?
Sent from my HTC Magic using XDA App
isn't the info on my first post the fastboot info?
bigbrotherbear said:
isn't the info on my first post the fastboot info?
Click to expand...
Click to collapse
Yes, I'm also not sure why people are ignoring that fact that you can't use fastboot either :-S
My bad, using my phone and completely missed the first page.
EDIT: I think mum was on the right track. Your going to need a goldcard. No one will be able to send you their .img because its SD card specific. You don't know anyone with a Android based phone?
Sent from my HTC Magic using XDA App
Looks like i'm getting progress....?
I have a gold card now thanks to my friend, however...
when I try to flash the SAPPIMG.nbh I get a Main Version is older!
I also tried the 2.53.707.2 SAPPIMG.zip and I still get this error.
I also just tried 2.16.707.3 SAPPIMG.zip and I still get this error.
YOU ARE STILL MAKING THE GOLDCARD THE WRONG WAY...
You should not get that error msg...
Try to remake the goldcard.
Did it on two different SD cards, the same way I did it before to get my phone off perfected SPL... not sure what I could've done to do it wrong this time around.....
a mmc CID can't change right?
followed this guide:
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
i think i brick my phone...how when i power on,it only keeps on boot into htc magic...so is there any think i can do or?
Please can you provide more info.
It's like going to the doctor and saying the you feel pain and nothing else!
Do you have fastboot access?
Do you have recovery access?
What did you do before you phone went dead?
What model, radio,spl and rom do you have?
mumilover said:
Please can you provide more info.
It's like going to the doctor and saying the you feel pain and nothing else!
Do you have fastboot access?
Do you have recovery access?
What did you do before you phone went dead?
What model, radio,spl and rom do you have?
Click to expand...
Click to collapse
i dont have a fasboot & recovery access...
i root my phone with universal androot,using rom manager i successfully flash recovery,then i download rom..i kinda like want to look around the rom manager app and i accidentally press ok with the backup & clear cache?the phone start to restart and now i cant turn on my phone
my phone is...
HTC magic 32a s-on
hboot 1.76.0007
radio 6.35.07.29
its because of the perfected spl right?
From what I can see,with my limited experience, either you left out a part after "s-on", or your phone thinks its neither HTC nor google.
It should say S-ON H
And I dont think that 0007 is perfected.
But I'm a noob and would wait for mumilover to respond...
ekie84 said:
HTC magic 32a s-on
hboot 1.76.0007
radio 6.35.07.29
Click to expand...
Click to collapse
I want ALL fastboot info.
How did you get this info....
I don't believe that rom-manager has the power to **** up your fastboot.
Recovery and system, maybe - but not fastboot.
When you hold back-button and power-button together what do you see?
Write it down here or take a picture or what ever...
Can you see fastboot?
If you can't see anything beside flash screen then i can't help you!
TheBladeofFate said:
From what I can see,with my limited experience, either you left out a part after "s-on", or your phone thinks its neither HTC nor google.
It should say S-ON H
And I dont think that 0007 is perfected.
But I'm a noob and would wait for mumilover to respond...
Click to expand...
Click to collapse
yes it say s-on H
mumilover said:
I want ALL fastboot info.
How did you get this info....
I don't believe that rom-manager has the power to **** up your fastboot.
Recovery and system, maybe - but not fastboot.
When you hold back-button and power-button together what do you see?
Write it down here or take a picture or what ever...
Can you see fastboot?
If you can't see anything beside flash screen then i can't help you!
Click to expand...
Click to collapse
when i hold back+power (recovery) & hold menu+power (fastboot) nothing happen...all i can see is the "htc magic"
its ok then...i've email the service centre & their say if they can reflash the rom successfully their will charge me rm80
Similar Issue
Hey Guys and Girls,
This is my first time posting on this site. I have run into a similar issue and have attempted to post on numerous sites without having any luck solving the problem.
The quick version: I ran z4root to root my phone; it said successful. I then installed Rom Manager and switched my recovery to Clockwork (the most recent one). Next I downloaded the latest CM6 from the Rom Manager with GApps. After having unsuccessful attempts at backing up and wiping first, I decided to try installing the Rom without backing up or wiping data. The Rom install worked this time (I got installation successful). However, when the phone rebooted itself, it never got past the Rogers screen. It is now in a constant state of rebooting until I pull the battery.
I can get to fastboot, but cannot get to the recovery screen. My HTC Magic 32A specs from the fastboot menu are:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAP50000)
CPLD-12
RADIO-6.35.16.19
Some other info that may help:
-my PC recognizes my phone (I have been trying the Radio Switcher v.GUI 4.1 and it says the phone is connected) but it is not allowing me to flash anything.
-When I try "adb devices" it gives error: no device attached but "fastboot devices" gives me a number.
-I have tried putting "recovery-RA-sapphire-v1.7.0H" on my sdcard, but the HBoot says no image or wrong image
-The Radio Switcher v.GUI 4.1 says my phone is not rooted
-I tried the goldcard method of rooting, but because I can't get the phone to recognize the sdcard, I can't get a proper CID for the goldcard creator
Hopefully I've provided enough info to get some help. I am waiting patiently, but am starting to get sick of the old Sony Ericsson Anything helps!
Run this 2 commands in fastboot and post here the ourput.
Code:
fastboot oem h
fastboot getvar version-main
Here is the info you required.
C:\AndroidSDK\platform-tools>fastboot oem h
... INFOcommand list
INFOkeytest
INFOheap
INFOboot
INFOreset
INFOpowerdown
INFOrebootRUU
INFOtask
INFOenableqxdm
INFOrtask
OKAY [ 0.009s]
finished. total time: 0.009s
C:\AndroidSDK\platform-tools>fastboot getvar version-main
version-main: 3.54.631.3
finished. total time: 0.001s
run this command to activate the sdcard:
Code:
fastboot oem enableqxdm 1
You have to make a goldcard... if you can't make it using your device, then do it using any other android device.
When you have made the goldcard come back here, and i'll guide through the rest :0)
Done. I made a gold card previously...hopefully it still works. Once it's made into a goldcard, is it always a goldcard?
Actually... re-checking your info - you don't need a goldcard..
No need for sdcard either...
Download this sappimg.zip :
http://rapidshare.com/files/437924840/sappimg.zip
Then run this command from a command prompt:
Code:
fastboot flash zip sappimg.zip
Make sure that the sappimg.img is in the same folder as fastboot.exe
The sappimg.zip is the newest rogers update... the same version as you currently have...
No need for goldcard or anything :0)
if you get any troubles, then post here the outcome of the command prompt..
When all is done, you should be back on stock 2.1...
From there you follow my guide (check my signature) to root and get custom recovery.
Good luck
hi guys,
i got the same problem, here im my country nobody knows how to solve (im from brazil)
when a tryed to updade with sapping file, in the radio part, the screen became dark, then white.
now I can get to fastboot, but cannot get to the recovery screen. My HTC Magic 32A specs from the fastboot menu are:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.008 (SAP60000)
CPLD-12
RADIO-3.22.20.17
my PC recognizes my phone but it is not allowing me to flash anything.
When I try "adb devices" it gives error: no device attached but fastboot command works fine.
i have my first goldcard.
this forum is my last hope... if anyone know how to proced, help me pls
I had the same problem as a few of you and after trying everything I eventually decided to try installing SAPPIMG.zip from hboot and it worked fine. Took me a while to find the correct SAPPIMG but you should be able to find it on the forums here. You have to put the SAPPIMG.zip on the root of your SD card from your computer, put it in the phone, boot into fastboot and go into hboot and it'll load the SAPPIMG file. If you have the wrong SAPPIMG it'll usually give you an error when trying to install it'll say someting like update failed or wrong device ID. It took me about 4-5 different SAPPIMG to find the correct one for my phone.
Hey,
This is the info from my command prompt:
C:\AndroidSDK\platform-tools>fastboot flash zip sappimg.zip
sending 'zip' (110447 KB)... FAILED (remote: not allow)
finished. total time: 0.002s
The phone starts the box with the arrow and then after a few seconds it shutdowns
Dear Mumi,
Dear All Please help me...
my htc magic white before flashed is :
RUU_Sapphire_Rogers_WWE_2.17.631.2_release_signed_ NoDriver
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jun 2 2009, 17:28:28
Root build RA-sapphire-v1.6.2H
After Flashing and update both of radio and SPL
RUU_Sapphire_HTC_Asia_WWE_3.03.728.4_SEA_release_s igned_NoDriver
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0007 (SAPP10000)
CPLD-12
RADIO-6.35.07.29
Aug 4 2009, 19:43:30
At the time My HTC Magic is working, but I can't root and also in the ROM it self missing android market.
then installed Universal androd and working...Last night i just tried to factory reset and The phone starts the box with the arrow and then after a few seconds it shutdowns, any idea to get in fastboot or just make HTC start normally
Thank in advance
cj.smith14 said:
Hey,
This is the info from my command prompt:
C:\AndroidSDK\platform-tools>fastboot flash zip sappimg.zip
sending 'zip' (110447 KB)... FAILED (remote: not allow)
finished. total time: 0.002s
Click to expand...
Click to collapse
Hmm... try this:
Code:
fastboot oem rebootRUU
The above will set the device into RUU mode.
Then download the official rogers RUU..
Run it and it should install just fine... no need for goldcard or sdcard..
I hope this will work.
atrix.suhendra said:
....
Click to expand...
Click to collapse
fastlan said:
.....
Click to expand...
Click to collapse
Please start your own thread or else the OP will loose his opportunity to get proper help!
I will try to help where i can :0)
Hey,
I just wanted to say I appreciate all the time you are putting in to helping me. I just did the RUU install, but once it gets to the updating signature part I get:
ERROR [132]: SIGNATURE ERROR
The ROM Update Utility cannot update your android phone.
The whole story is a little bit long.
I still can access to fastboot. On the RUU screen, I can read the following information:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008(SAPP10000)
CPLD-12
RADIO-3.22.20.17
Nov 3 2009, 15:56:29
Here is how it happened. I flashed the radio to 3.22 and run a wrong RUU file (RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver.exe). The problem comes: after unsuccessfully flash the RUU file (as the radio in the RUU is 6.35), the security is turned ON (S-ON). Those RUU files with radio 3.22.XX have different version of SPL from 1.76.XXX. I cannot find a RUU file with SPL 1.76.008 and radio 3.22.XX. Therefore, I cannot use any RUU file to change the situation (I got a goldcard).
The security is turned on and I cannot change the radio, SPL or recovery in fastboot (cannot pass the infoSignature checking).
Now I still can access to fastboot (such as fastboot devices).
I don't know why I cannot use fastboot to boot a recovery (fastboot boot recovery-RA-sapphire-v1.7.0H.img). I was able to send the recovery img to the device. But the booting of recovery takes for ever.
I can only enter fastboot mode now using any combination of buttons.
Please give your comment and help to solve this.
Thank you very much!
htchd2sg said:
The whole story is a little bit long.
I still can access to fastboot. On the RUU screen, I can read the following information:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008(SAPP10000)
CPLD-12
RADIO-3.22.20.17
Nov 3 2009, 15:56:29
Here is how it happened. I flashed the radio to 3.22 and run a wrong RUU file (RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver.exe). The problem comes: after unsuccessfully flash the RUU file (as the radio in the RUU is 6.35), the security is turned ON (S-ON). Those RUU files with radio 3.22.XX have different version of SPL from 1.76.XXX. I cannot find a RUU file with SPL 1.76.008 and radio 3.22.XX. Therefore, I cannot use any RUU file to change the situation (I got a goldcard).
The security is turned on and I cannot change the radio, SPL or recovery in fastboot (cannot pass the infoSignature checking).
Now I still can access to fastboot (such as fastboot devices).
I don't know why I cannot use fastboot to boot a recovery (fastboot boot recovery-RA-sapphire-v1.7.0H.img). I was able to send the recovery img to the device. But the booting of recovery takes for ever.
I can only enter fastboot mode now using any combination of buttons.
Please give your comment and help to solve this.
Thank you very much!
Click to expand...
Click to collapse
Many of this was answered, search the forum.
Here is the thing you have wrong spl radio combination,you have perfected spl. You can do a fastboot boot xxxxxx.img and enter recovery. Then you must flash eng spl 1.33.2010.And you will be unbricked
Thank you for the reply.
I tried fastboot recovery-RA-sapphire-v1.7.0H.img. But after the sending of the image is over, it will stay in booting for ever. I don't understand why I cannot boot the recovery.
htchd2sg said:
Thank you for the reply.
I tried fastboot recovery-RA-sapphire-v1.7.0H.img. But after the sending of the image is over, it will stay in booting for ever. I don't understand why I cannot boot the recovery.
Click to expand...
Click to collapse
You cant boot that recovery try the one hero recovery Ra-magic1.6.2H smthing recovery
I downloaded the 1.6.2 recovery from http://forum.xda-developers.com/showpost.php?p=4549551&postcount=1
But I still cannot boot the recovery(I can send the recovery)
htchd2sg said:
I downloaded the 1.6.2 recovery from http://forum.xda-developers.com/showpost.php?p=4549551&postcount=1
But I still cannot boot the recovery(I can send the recovery)
Click to expand...
Click to collapse
Hmm did you try the sappimg.nbh to restore your magic???
Updated: I tried to use sappimg.nbh in fastboot mode. However, it responses that the main version is older. This is because I have run the RUU (RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_No Driver.exe), whose main version is 3.05 while the sappimg.nbh is older than this number.
Now I can access fastboot and the hboot, but not the recovery. Of course, I cannot boot the android OS either. Is there a method to root just in the fastboot mode? I have the security turned on (S-ON)?
Anyone got suggestion? Thanks!
Can anyone help on this? really get frustrated
htchd2sg said:
Updated: I tried to use sappimg.nbh in fastboot mode. However, it responses that the main version is older. This is because I have run the RUU (RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_No Driver.exe), whose main version is 3.05 while the sappimg.nbh is older than this number.
Now I can access fastboot and the hboot, but not the recovery. Of course, I cannot boot the android OS either. Is there a method to root just in the fastboot mode? I have the security turned on (S-ON)?
Anyone got suggestion? Thanks!
Click to expand...
Click to collapse
You need to create a goldcard www.theunlockr.com at How to's and then use sappimg.nbh
I got gold card already. . Thank you!
Do you solve this? I got the exactly problem with you =(
I actually had this same issue months ago and nothing worked. Unfortunately I ended up getting another phone.
Sent from my SGH-T959 using XDA App
r3v4N said:
I actually had this same issue months ago and nothing worked. Unfortunately I ended up getting another phone.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
What a bad news =( I had sent this phone to repair, but all of their experts cannot fix as well.
That's lame.... did you try the unroot process?
Sent from my SGH-T959 using XDA App
You could try unbricking by flashing the Rogers or Brazilian Android 2.1 RUU. The main version is newer and a goldcard should make it work.
Please make sure your battery is full and that you have a PROPER GOLDCARD!!! Otherwise this will most likely fail.
I've uploaded the sappimg to http://www.multiupload.com/WO0S35S53S
Rename it to sappimg.zip, copy it to the root of your SD card and boot into fastboot (vol-down and power). That SHOULD fix your phone. Then again, it could also brick it even worse, but what do you have left to lose?
After loaded sappimg, it checking sappimg, then went back to HBOOT. Nothing happened. I've tried to recreate my gold card, no luck with it =(
Okay basically i got a htc magic,and on the first day of getting it,i rooted it and started playing around with the software,then i tried install the 2.2.1 rom but sadly failed,my mobile gets stuck on the vodafone uk splash screen
Heres the info you might need to know about it
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT - 1.33.0004
CPLD - 10
RADIO - 2.22.28.25
apr 9 2009,23:30:40
The stuff i can do with it is
volume down+power=HBOOT
home+power which comes up with a triangle and a question mark in the middle
back+power which is fastboot
AND I ALSO CAN ACCESS THE FASTBOOT USB
I have tried installing differant vodafone uk sappimg's and update.zips but none work,i also have a program called HTC Android Phone ROM Update Utility 1.0.1.30 Which near to the end comes with the:
ERROR[131]:CUSTOMER ID ERROR
The ROM Update utility cannot update your Android Phone
Please get the correct ROM update Utility and try again
Can someone help me please ,my phone has been like this for 2 weeks now and its really ennoying
Anybody There
Hello can someone help me please,i have been to 3 differant vodafone stores all saying they cant help,iv been to carphone warehouse and Fones4U also saying there is nothing they can do,iv sent it to htc saying i have no warrenty and the phone stores like stalls are saying they wont be responsible if they accidently mess up my phone,i really need it fixed
Dont worry
Omfg i brought my phone back from the dead,i found the right ruu updater now its working
@Artic: tell me what the file is!
cereal86 said:
@Artic: tell me what the file is!
Click to expand...
Click to collapse
cereal86: do you have the exact same device? What errors are you getting?
i have a htc magic 32B and i only can access to fastboot, i already put a .nbh file to sdcard, but fail because of checksum error! Trying to do a goldcard but it's not easy!
cereal86 said:
i have a htc magic 32B and i only can access to fastboot, i already put a .nbh file to sdcard, but fail because of checksum error! Trying to do a goldcard but it's not easy!
Click to expand...
Click to collapse
Goldcard will only help if your error is related to the CID. If you have a branded phone (Rogers, for example) and you want to flash a ROM that is only meant for a different carrier (Vodafone, for example), the goldcard overrides the CID check and continues the process.
A checksum error could mean that the file has been altered.
Could you tell us exactly what information you see on your phone's FASTBOOT page? Model, HBOOT version, RADIO, S-ON/S-OFF, etc.
Thanks.
Sapphire PVT 32B Ship S-On G
hboot 1.33.0014 (sapp10000)
CPLD-10
Radio 2.22.19.23
cid: VODAP304
cidnum: VODAP304¦¥¤ÿ?
version-main: 3.12.0.0
cereal86 said:
Sapphire PVT 32B Ship S-On G
hboot 1.33.0014 (sapp10000)
CPLD-10
Radio 2.22.19.23
cid: VODAP304
cidnum: VODAP304¦¥¤ÿ?
version-main: 3.12.0.0
Click to expand...
Click to collapse
Okay, there at two issues to deal with first. You have a perfected SPL, 1.33.0014, and you are S-ON. The perfected SPL means that fastboot is crippled and won't let you do most things, and S-ON means it will only let you flash signed images.
***
*** This is one way to fix things, but I'm sure someone knows a better way. If someone knows a better way, please post ***
***
The first step is to unlock the bootloader. This will at least let you flash a custom recovery.
Go to HTC Dev and make an account. Once you've logged in, click on "Unlock Bootloader", then the "Get Started" button. You should be able to skip the RUU installation step, but, if you must do it, the file you want is at this link: SAPP10000 hboot 1.33.0014G. Follow the steps, send your ID token, receive the Unlock_code.bin, and flash it.
Once all of that is done, the bootloader should be unlocked (but still S-ON). You should now be able to flash a custom recovery using this guide: RA sapphire recovery. Scroll down to where it says "via fastboot". It says that is requires an ENG spl, but the unlocked bootloader should be enough. The file you want is: recovery-RA-sapphire-v1.7.0G.img
If you get into the custom recovery alright, you can try updating to an engineering SPL using a signed zip file. Go to this thread and download "roottools". Open it up and get "hboot_2010_signed.zip". Put it in the root (not in a folder) of an sdcard, put the sdcard into your phone and boot into recovery. Look for an option to install a zip file from your sdcard.
If that doesn't work, try renaming the hboot_2010_signed.zip to SAPPIMG.zip, put it on the sdcard and boot into HBOOT mode (Volume Down + Power). It will scan the sdcard and try to install SAPPIMG.zip.
If all of that goes well, let us know.
1. i already go to htcdev used the 1.33.0014 spl and unlocked it. It says "*** UNLOCKED***"
2. i don't recovery, only fastboot
3. tried goldcard with sandisk and no sucess!
cereal86 said:
1. i already go to htcdev used the 1.33.0014 spl and unlocked it. It says "*** UNLOCKED***"
2. i don't recovery, only fastboot
3. tried goldcard with sandisk and no sucess!
Click to expand...
Click to collapse
But did you actually try to flash a recovery image from fastboot?
Download this image: AmonRA 1.7.0G Recovery image
Put your phone into fastboot USB
Open a Command Prompt, cd to the recovery-RA-blahblah.img location, then type this:
fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img
Let us know if that works.
impossible, when i send a command, i receive a error message "remote: not allow"
cereal86 said:
impossible, when i send a command, i receive a error message "remote: not allow"
Click to expand...
Click to collapse
How about:
fastboot boot recovery-RA-sapphire-v1.7.0G.img
i receive a error message "remote: not allow"
cereal86 said:
i receive a error message "remote: not allow"
Click to expand...
Click to collapse
Hmmm. Are you able to enter HBOOT mode? Turn the phone completely off (or pull the battery), then hold VOLUME DOWN and POWER until it says HBOOT.
Yes, i can enter hboot and fastboot
cereal86 said:
Yes, i can enter hboot and fastboot
Click to expand...
Click to collapse
Alright. We can try downgrading with the RUU for your phone and a goldcard. Download the RUU exe file, run it, but don't use it to install. While it's open, go into C:\ Users \ Whateveryourusernameis \ AppData (may be hidden) \ Local \ Temp \ then look for the 2 newest folders in Temp. One of them will contain "dotnetinstaller.exe" and another folder. Go into the other folder and you'll find "rom.nbh".
Run: fastboot flash nbh rom.nbh
If it still doesn't work, try it in RUU mode: fastboot oem rebootRUU (and then use fastboot flash nbh rom.nbh)
If THAT doesn't work, put the rom.nbh on the root directory of your goldcard, rename it SAPPIMG.nbh, and boot into HBOOT mode. It should be autodetected.
DasBub said:
Alright. We can try downgrading with the RUU for your phone and a goldcard. Download the RUU exe file, run it, but don't use it to install. While it's open, go into C:\ Users \ Whateveryourusernameis \ AppData (may be hidden) \ Local \ Temp \ then look for the 2 newest folders in Temp. One of them will contain "dotnetinstaller.exe" and another folder. Go into the other folder and you'll find "rom.nbh".
Run: fastboot flash nbh rom.nbh
If it still doesn't work, try it in RUU mode: fastboot oem rebootRUU (and then use fastboot flash nbh rom.nbh)
If THAT doesn't work, put the rom.nbh on the root directory of your goldcard, rename it SAPPIMG.nbh, and boot into HBOOT mode. It should be autodetected.
Click to expand...
Click to collapse
BTW, if it gives you a "main version is older" error, we can fix that.
as soon i tested all the ways, i'll report to you! BIG THANKS to you! cheers!
Let's catch up: i have an sapphire 32B S-ON G, spl 1.33.0014 unlocked, radio 2.22.19.23
1. when i run RUU i get error "bootloader version"
2. all the things i do with fastboot, receive error "remote: not allow"
2.1 when use fastboot oem rebootRUU and then use fastboot flash nbh rom.nbh, received error "Failed (remote: 43 main version check fail)"
3. using sdcard SAPPIMG.nbh (from RUU):
3.1 Non goldcard: transcend 8GB "Main Version is older!"
3.2 Goldcard: kingston 4GB "Main Version is older!"
---------- Post added at 02:10 PM ---------- Previous post was at 02:04 PM ----------
is there any tool to edit the edit NBH file and "fool" the phone?
I'll need to buy a 2gb kingston sdcard?
can i flash ruu hboot 1.76.0013 and try all the process?