Database Users

Not bricked but pretty much there.

So here are firstly the details
-------------------------------
SAPPHIRE PVT 32A ENG S-ON H
HBOOT -1.33.2010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jun 2 2009, 17:27:03
-------------------------------
As you can see above I have the engineering SPL but I am unable to flash via fastboot gives me the not verified error. I previously was stuck in a reboot loop which I finally got out by creating a goldcard and using 2.53.707.2_-_sappimg.zip. I am able to use the phone but thats about it. There is no access to sd card I have tried numerous cards and they don't work.
From Inside the Phone:
-------------------------------
Firmware version: 1.5
Baseband version: 62.525.20.18U_3.22.20.17
Kernel version: 2.6.27-cb85e129
[email protected] #3
Build Number: 2.53.707.2 146733 CL#37318 test-keys
---------------------------------
I would like to thank anyone in advance for their help. I have searched and been searching the forums for 2 days non-stop usually its stated that you need an Engineering SPL (which I guess I am already using) can't downgrade because I have no access to sdcard either. Please help........

Try going here and grabbing the sappimg from there, load it onto your goldcard, and flash it from hboot the same way you did the first time. There's another guy I was working with on here that tried to use the same engineering SPL and it didn't work, but I don't know if he ever tried that one. The sappimg I'm referring you too is the same one I used when I rooted my phone. Give it a shot and let us know back here.

DonJuan692006 said:
Try going here and grabbing the sappimg from there, load it onto your goldcard, and flash it from hboot the same way you did the first time. There's another guy I was working with on here that tried to use the same engineering SPL and it didn't work, but I don't know if he ever tried that one. The sappimg I'm referring you too is the same one I used when I rooted my phone. Give it a shot and let us know back here.
Click to expand...
Click to collapse
Thanks a lot I am going to grab it right now. Will update in a bit.
*UPDATE:*
No difference same as before cannot access sdcard and same SPL & Radio. No changes... :-(

Im a noob but I just recovered myself from a semi-brick.. What i did was to load the hero recovery back onto the phone via fast boot. flash hboot 1.76.2007 via recovery. Boot back into fastboot.
fastboot flash radio Radio_HTC_PVT_32A_3.22.20.17.img
fastboot flash hboot hboot-1.33.2005.img
fastboot flash recovery recovery-RA-sapphire-v1.7.0H.img
fastboot erase system -w
fastboot reboot-bootloader
check that you are running hboot 1.33.2005 radio 3.22.20.17
then flash your rom..
worked for me, maybe it will work for you. good luck

Alien-X said:
Im a noob but I just recovered myself from a semi-brick.. What i did was to load the hero recovery back onto the phone via fast boot. flash hboot 1.76.2007 via recovery. Boot back into fastboot.
fastboot flash radio Radio_HTC_PVT_32A_3.22.20.17.img
fastboot flash hboot hboot-1.33.2005.img
fastboot flash recovery recovery-RA-sapphire-v1.7.0H.img
fastboot erase system -w
fastboot reboot-bootloader
check that you are running hboot 1.33.2005 radio 3.22.20.17
then flash your rom..
worked for me, maybe it will work for you. good luck
Click to expand...
Click to collapse
Thanks for your help but as soon as I try loading I get the verification fails
D:\AndroidSDK\tools>fastboot flash flash hboot-1.76.2007.img
sending 'flash' (512 KB)... OKAY [ 0.493s]
writing 'flash'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.648s
Click to expand...
Click to collapse
Any other ideas? Appreciate all the help!

flash 1.76.2007 via recovery, not fastboot.
Link for Hboot 1.76.2007 ZIP
http://www.4shared.com/file/211145376/3da88b40/update-hboot-1762007-signed.html
another reason it might not be working is becuz your doing 'fastboot flash flash"
which if correct it should be 'fastboot flash hboot'

Did this solve your issue?
Sent from my HTC Magic using XDA App

Alien-X said:
Did this solve your issue?
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
Sorry wasn't around. Thank you for responding.
Your right I was not using HBOOT but it didn't make a difference I still get the verification error using fastboot.
As you suggested I should try updating using recovery but like I said the SDcard is not detected. I used the "fastboot -c board_sapphire.disable_sdcard=0 boot recovery...*" and it detected the sd card when I try to update the using the zip file it gets stuck at Opening update package....
Any other options?

[help needed]HTC magic PVT 32A: wrong radio (3.22.XX) and SPL (1.76.0008)

The whole story is a little bit long.
I still can access to fastboot. On the RUU screen, I can read the following information:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008(SAPP10000)
CPLD-12
RADIO-3.22.20.17
Nov 3 2009, 15:56:29
Here is how it happened. I flashed the radio to 3.22 and run a wrong RUU file (RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver.exe). The problem comes: after unsuccessfully flash the RUU file (as the radio in the RUU is 6.35), the security is turned ON (S-ON). Those RUU files with radio 3.22.XX have different version of SPL from 1.76.XXX. I cannot find a RUU file with SPL 1.76.008 and radio 3.22.XX. Therefore, I cannot use any RUU file to change the situation (I got a goldcard).
The security is turned on and I cannot change the radio, SPL or recovery in fastboot (cannot pass the infoSignature checking).
Now I still can access to fastboot (such as fastboot devices).
I don't know why I cannot use fastboot to boot a recovery (fastboot boot recovery-RA-sapphire-v1.7.0H.img). I was able to send the recovery img to the device. But the booting of recovery takes for ever.
I can only enter fastboot mode now using any combination of buttons.
Please give your comment and help to solve this.
Thank you very much!

htchd2sg said:
The whole story is a little bit long.
I still can access to fastboot. On the RUU screen, I can read the following information:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0008(SAPP10000)
CPLD-12
RADIO-3.22.20.17
Nov 3 2009, 15:56:29
Here is how it happened. I flashed the radio to 3.22 and run a wrong RUU file (RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_NoDriver.exe). The problem comes: after unsuccessfully flash the RUU file (as the radio in the RUU is 6.35), the security is turned ON (S-ON). Those RUU files with radio 3.22.XX have different version of SPL from 1.76.XXX. I cannot find a RUU file with SPL 1.76.008 and radio 3.22.XX. Therefore, I cannot use any RUU file to change the situation (I got a goldcard).
The security is turned on and I cannot change the radio, SPL or recovery in fastboot (cannot pass the infoSignature checking).
Now I still can access to fastboot (such as fastboot devices).
I don't know why I cannot use fastboot to boot a recovery (fastboot boot recovery-RA-sapphire-v1.7.0H.img). I was able to send the recovery img to the device. But the booting of recovery takes for ever.
I can only enter fastboot mode now using any combination of buttons.
Please give your comment and help to solve this.
Thank you very much!
Click to expand...
Click to collapse
Many of this was answered, search the forum.
Here is the thing you have wrong spl radio combination,you have perfected spl. You can do a fastboot boot xxxxxx.img and enter recovery. Then you must flash eng spl 1.33.2010.And you will be unbricked

Thank you for the reply.
I tried fastboot recovery-RA-sapphire-v1.7.0H.img. But after the sending of the image is over, it will stay in booting for ever. I don't understand why I cannot boot the recovery.

htchd2sg said:
Thank you for the reply.
I tried fastboot recovery-RA-sapphire-v1.7.0H.img. But after the sending of the image is over, it will stay in booting for ever. I don't understand why I cannot boot the recovery.
Click to expand...
Click to collapse
You cant boot that recovery try the one hero recovery Ra-magic1.6.2H smthing recovery

I downloaded the 1.6.2 recovery from http://forum.xda-developers.com/showpost.php?p=4549551&postcount=1
But I still cannot boot the recovery(I can send the recovery)

htchd2sg said:
I downloaded the 1.6.2 recovery from http://forum.xda-developers.com/showpost.php?p=4549551&postcount=1
But I still cannot boot the recovery(I can send the recovery)
Click to expand...
Click to collapse
Hmm did you try the sappimg.nbh to restore your magic???

Updated: I tried to use sappimg.nbh in fastboot mode. However, it responses that the main version is older. This is because I have run the RUU (RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_No Driver.exe), whose main version is 3.05 while the sappimg.nbh is older than this number.
Now I can access fastboot and the hboot, but not the recovery. Of course, I cannot boot the android OS either. Is there a method to root just in the fastboot mode? I have the security turned on (S-ON)?
Anyone got suggestion? Thanks!

Can anyone help on this? really get frustrated

htchd2sg said:
Updated: I tried to use sappimg.nbh in fastboot mode. However, it responses that the main version is older. This is because I have run the RUU (RUU_Sapphire_HTC_Europe_3.05.401.1_test_signed_No Driver.exe), whose main version is 3.05 while the sappimg.nbh is older than this number.
Now I can access fastboot and the hboot, but not the recovery. Of course, I cannot boot the android OS either. Is there a method to root just in the fastboot mode? I have the security turned on (S-ON)?
Anyone got suggestion? Thanks!
Click to expand...
Click to collapse
You need to create a goldcard www.theunlockr.com at How to's and then use sappimg.nbh

I got gold card already. . Thank you!

Do you solve this? I got the exactly problem with you =(

I actually had this same issue months ago and nothing worked. Unfortunately I ended up getting another phone.
Sent from my SGH-T959 using XDA App

r3v4N said:
I actually had this same issue months ago and nothing worked. Unfortunately I ended up getting another phone.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
What a bad news =( I had sent this phone to repair, but all of their experts cannot fix as well.

That's lame.... did you try the unroot process?
Sent from my SGH-T959 using XDA App

You could try unbricking by flashing the Rogers or Brazilian Android 2.1 RUU. The main version is newer and a goldcard should make it work.
Please make sure your battery is full and that you have a PROPER GOLDCARD!!! Otherwise this will most likely fail.
I've uploaded the sappimg to http://www.multiupload.com/WO0S35S53S
Rename it to sappimg.zip, copy it to the root of your SD card and boot into fastboot (vol-down and power). That SHOULD fix your phone. Then again, it could also brick it even worse, but what do you have left to lose?

After loaded sappimg, it checking sappimg, then went back to HBOOT. Nothing happened. I've tried to recreate my gold card, no luck with it =(

HTC Magic 32B, unable to boot or flash from fastboot

I tried to upgrade my Radio with http://forum.xda-developers.com/showpost.php?p=9055790&postcount=1
Now (after 6 hours) I'm frustrated and I dont know what to do.
My Phone says:
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0013d (SAPP10000)
CPLD-10
RADIO-2.22.16.19
I can enter fastboot, but I'm not able to boot into the recovery. Also I'm not able to flash a new recovery, radio, hboot, boot, system or userdata.
If i try to flash something:
"INFOsignatur checking... FAILED (remote: signatur verify fail)"
If i try to boot into recovery:
"downloading 'boot.img' ... OKAY [1.703s]
booting...."
but nothing happens.
If i try to flash SAPPIMG.nbh it stucks on flashing radio.
Im really really frustrated and I hope someone can help me.

I've never seen that radio before. What I can tell you is that your going to have to downgrade using the goldcard method. You'll have to borrow a friends Android phone to make the goldcard. I'm sure by the time you get it made someone will be able to give more in depth directions or I'll be back in front of a computer.
Sent from my T-Mobile myTouch 3G using Tapatalk

I have created a Goldcard, but with a CID from a German forum, because non of my friends have a Android Phone
I tried to orange-1.58.73.2.nbh and sappimg.nbh from http://forum.xda-developers.com/showpost.php?p=9055790&postcount=1 but nothing works. Both stuck on "INFOstart image[radio] flushing ..."

You can't use the CID from another user. The CID is unique to the SD card, you need the CID for the SD card your using.
Sent from my T-Mobile myTouch 3G using Tapatalk

UPDATE:
Now i was able to flash a engineering SPL from an 32A sappimg.nbh . (android-hilfe.de/239127-post7.html for all german Magic users)
I can enter recovery *whuhuu* but still I'm not able to flash a new/other radio. Is there any solution for that?
UPDATE:
BRICKED ...

Deadspeller said:
UPDATE:
Now i was able to flash a engineering SPL from an 32A sappimg.nbh . (android-hilfe.de/239127-post7.html for all german Magic users)
I can enter recovery *whuhuu* but still I'm not able to flash a new/other radio. Is there any solution for that?
UPDATE:
BRICKED ...
Click to expand...
Click to collapse
Try putting the sappimg.nbh on your sdcard and then holding down the volume down + the power button and it should ask you to install and just press the scroll ball and it should fix your problem.

No its Bricked ;-)
But i found someone with an JTAG Interface.
Plz close

i am having similar trouble after:
* Format the Micro SD Card to FAT32.
* Copy the SAPPIMG.nbh file to the Micro SD Card.
* With the phone off, hold volume down and press power to boot into the bootloader.
* Once the bootloader is loaded, press power to install.
* Press the trackball to continue and press talk+menu+power to reboot.
I get:
parsing...[sapping.nbh]
1]radio_v2
2]bootloader
3]splash
4]recovery
5]boot
6]system
7]userdata
Do you want to start update?
yes
no
so i select yes and it says:
update in progress...
reading images...
checking signiture...
model id incorrect!
update fail!
i have magic 32b
please help

You need a goldcard.
Sent from my T-Mobile myTouch 3G using Tapatalk

I also have a magic (32B) and with the 1.33.0013d SPL I had a similar problem.
You need to read the first message of the 2708+ thread to the end to read how to flash to an old SPL (but you found that already).
I can only guess why you should try a G1 SPL or an 32A SPL on your phone since it seems like a recipe to brick the device. I reverted back to the SPL available from:
http://forum.xda-developers.com/showthread.php?t=529019
Since I had previous experience with the 2005 engineering-version I went for that one.
Did you also try to 2708+ to upgrade to Gingerbread?

All you did was correct but as DonJuan692006 said, you need a goldcard.
If you are running ubuntu you'll find a very simple tutorial (but in french) looking for didier.misson.net and golcard with google.
Good luck.
O-p

I have a similar problem.
I can't start ADB and I have no boot partition. Only FASTBOOT and HBOOT can be started.
Info of my phone (Google Developer Phone):
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0013 (SAPP30000)
CPLD-10
RADIO-2.22.27.08
Oct 21 2009,22:33:27
Not boot partition:
$ fastboot oem boot
... INFO[ERR] boot image does not exist!!!
FAILED (status read failed (No such device))
finished. total time: 5.208s
No recovery can be started:
$ fastboot boot recovery-RA-magic-v1.2.3G.img
downloading 'boot.img'... FAILED (remote: not allow)
finished. total time: 0.001s
Then I downloaded the vf-sappimg-crc24-1.33.0007.nbh for the "Magic 32B" and copied it to the sd-card. I renamed it into sappimg.nbh and started HBOOT. But I only get the well know messages:
SD Checking ...
Loading...[SAPPDIAG.zip]
No image!
Loading...[SAPPDIA3.nbh]
No image or wrong image!
Loading...[SAPPDIA2.nbh]
No image or wrong image!
Loading...[SAPPDIAG.nbh]
No image or wrong image!
Loading...[SAPPIMG.zip]
No image!
Loading...[SAPPIMG.nbh]
No image or wrong image!
Has anybody an idea what I can do now?
Thank's a lot!!
Felix

Now I know my fault.
HBOOT ist case sensetive. The correct name for the SAPPING.nbh is "SAPPIMG" with capital letters and ".nbh" with small letters.

[Q] Magic - Fastboot: FAILED (remote: not allowed)

Hi there,
I'd like to update to a newer Android Version. So as I read I have to flash a new recovery first. I tried to create a gold card in order to flash this new recovery but I still get an error when I use fastboot.
I read several tutorials and threads in this forum but i couldn't find the right answer. I hope someone can help me.
Is there a problem with a "ScanDisk" gold card...?
Error in Fastboot (sudo ./fastboot flash recovery recovery-RA-sapphire-v1.7.0H.img):
sending 'recovery' (4520 KB)... FAILED (remote: not allow)
System / Fastboot Commander Output:
Operating system: Linux.
Tools folder and fastboot file(s) created.
The folder containing the IMG files was not found.
MagicFiles folder found.
recovery-ra-magic_6.35-v1.7.0.1.img found.
radio_htc_pvt_32a_3.22.20.17.img found.
hboot-1.33.2010.img found.
hboot-1.76.2007.img found.
radio_htc_pvt_32a_6.35.16.19.img found.
recovery-ra-sapphire-v1.7.0h.img found.
"Flash old" button enabled.
"Flash new" button enabled.
No Nandroid folder was not found - "Restore" button disabled.
STARTING PRINT OF DEVICE INFO.
-----------------------------------.
Radio version: 3.22.23.18.
SPL/hboot version: 1.33.0014.
product: sapphire.
mid: sapp10000.
security: on.
build-mode: ship.
-----------------------------------.

You said you have a Goldcard already, right?
Also, only do this if your Magic is a 32B. If it's a 32A, you're bricked for life (and I'm not responsible). It says on the fastboot screen which you are.
If it is a 32B, get the first download from the NBH/ZIP section of this thread <a href=http://forum.xda-developers.com/showthread.php?t=548218>here</a> (Make sure to read the warnings at the top) and put it on your normal SD card.
Then, boot into HBOOT mode by either
1. Booting into Fastboot mode and pushing volume down.
2. Booting phone with volume down pressed.
It should find the sappimg after a minute. If not, make sure the sappimg is on the SD card not in any folders and also that it's named SAPPIMG.zip.
Choose yes to all the questions. If it has an error, reboot and try again or try it on a Goldcard.
Now fastboot should work and you can do whatever.

I_Cornholio said:
You said you have a Goldcard already, right?
Also, only do this if your Magic is a 32B. If it's a 32A, you're bricked for life (and I'm not responsible). It says on the fastboot screen which you are.
If it is a 32B, get the first download from the NBH/ZIP section of this thread <a href=http://forum.xda-developers.com/showthread.php?t=548218>here</a> (Make sure to read the warnings at the top) and put it on your normal SD card.
Then, boot into HBOOT mode by either
1. Booting into Fastboot mode and pushing volume down.
2. Booting phone with volume down pressed.
It should find the sappimg after a minute. If not, make sure the sappimg is on the SD card not in any folders and also that it's named SAPPIMG.zip.
Choose yes to all the questions. If it has an error, reboot and try again or try it on a Goldcard.
Now fastboot should work and you can do whatever.
Click to expand...
Click to collapse
im having a similar problem i get stuck at the mytouch 3g screen then it try's to reboot
sapphire pvt 32b ship s-off g
hboot-1.33.0013(sapp******)
cpld10
radio-2.22.28.25
thats the fast boot mode stuff what can i do please help

iphreek said:
im having a similar problem i get stuck at the mytouch 3g screen then it try's to reboot
sapphire pvt 32b ship s-off g
hboot-1.33.0013(sapp******)
cpld10
radio-2.22.28.25
thats the fast boot mode stuff what can i do please help
Click to expand...
Click to collapse
1.33.0013 is perfected SPL, remote commands are disabled in this hboot.
If you have custom recovery (AmonRa or Clockworkmod), then you are lucky.
If not, then you must install official ROM: 3.12.531.1 T-Mobile USA FRG83D
http://www.4shared.com/file/j64ygA9t/RUU_Sapphire_T-Mobile_US_31253.html
After that, you can root phone with SuperOneClick, then install custom recovery, and custom rom (via custom recovery)

I already rooted using superone click but my phone wont boot after I tried to flash a rom how do I get it to boot up and work again I'm freaking out oh an I have clockwork recorvery image that's how I tried to flash the rom but i dont have a goldcard can i still use the same method can u give me a walk through or is there a way using clockwork mod

iphreek said:
I already rooted using superone click but my phone wont boot after I tried to flash a rom how do I get it to boot up and work again I'm freaking out oh an I have clockwork recorvery image that's how I tried to flash the rom but i dont have a goldcard can i still use the same method can u give me a walk through or is there a way using clockwork mod
Click to expand...
Click to collapse
If you have custom recovery - just flash custom rom via it.
P.s. but choose appropriate rom (with tags 32b)
Sent from my A7-040 using Tapatalk

[Q] Semi Bricked Htc Magic 32B

Okay basically i got a htc magic,and on the first day of getting it,i rooted it and started playing around with the software,then i tried install the 2.2.1 rom but sadly failed,my mobile gets stuck on the vodafone uk splash screen
Heres the info you might need to know about it
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT - 1.33.0004
CPLD - 10
RADIO - 2.22.28.25
apr 9 2009,23:30:40
The stuff i can do with it is
volume down+power=HBOOT
home+power which comes up with a triangle and a question mark in the middle
back+power which is fastboot
AND I ALSO CAN ACCESS THE FASTBOOT USB
I have tried installing differant vodafone uk sappimg's and update.zips but none work,i also have a program called HTC Android Phone ROM Update Utility 1.0.1.30 Which near to the end comes with the:
ERROR[131]:CUSTOMER ID ERROR
The ROM Update utility cannot update your Android Phone
Please get the correct ROM update Utility and try again
Can someone help me please ,my phone has been like this for 2 weeks now and its really ennoying

Anybody There
Hello can someone help me please,i have been to 3 differant vodafone stores all saying they cant help,iv been to carphone warehouse and Fones4U also saying there is nothing they can do,iv sent it to htc saying i have no warrenty and the phone stores like stalls are saying they wont be responsible if they accidently mess up my phone,i really need it fixed

Dont worry
Omfg i brought my phone back from the dead,i found the right ruu updater now its working

@Artic: tell me what the file is!

cereal86 said:
@Artic: tell me what the file is!
Click to expand...
Click to collapse
cereal86: do you have the exact same device? What errors are you getting?

i have a htc magic 32B and i only can access to fastboot, i already put a .nbh file to sdcard, but fail because of checksum error! Trying to do a goldcard but it's not easy!

cereal86 said:
i have a htc magic 32B and i only can access to fastboot, i already put a .nbh file to sdcard, but fail because of checksum error! Trying to do a goldcard but it's not easy!
Click to expand...
Click to collapse
Goldcard will only help if your error is related to the CID. If you have a branded phone (Rogers, for example) and you want to flash a ROM that is only meant for a different carrier (Vodafone, for example), the goldcard overrides the CID check and continues the process.
A checksum error could mean that the file has been altered.
Could you tell us exactly what information you see on your phone's FASTBOOT page? Model, HBOOT version, RADIO, S-ON/S-OFF, etc.
Thanks.

Sapphire PVT 32B Ship S-On G
hboot 1.33.0014 (sapp10000)
CPLD-10
Radio 2.22.19.23
cid: VODAP304
cidnum: VODAP304¦¥¤ÿ?
version-main: 3.12.0.0

cereal86 said:
Sapphire PVT 32B Ship S-On G
hboot 1.33.0014 (sapp10000)
CPLD-10
Radio 2.22.19.23
cid: VODAP304
cidnum: VODAP304¦¥¤ÿ?
version-main: 3.12.0.0
Click to expand...
Click to collapse
Okay, there at two issues to deal with first. You have a perfected SPL, 1.33.0014, and you are S-ON. The perfected SPL means that fastboot is crippled and won't let you do most things, and S-ON means it will only let you flash signed images.
***
*** This is one way to fix things, but I'm sure someone knows a better way. If someone knows a better way, please post ***
***
The first step is to unlock the bootloader. This will at least let you flash a custom recovery.
Go to HTC Dev and make an account. Once you've logged in, click on "Unlock Bootloader", then the "Get Started" button. You should be able to skip the RUU installation step, but, if you must do it, the file you want is at this link: SAPP10000 hboot 1.33.0014G. Follow the steps, send your ID token, receive the Unlock_code.bin, and flash it.
Once all of that is done, the bootloader should be unlocked (but still S-ON). You should now be able to flash a custom recovery using this guide: RA sapphire recovery. Scroll down to where it says "via fastboot". It says that is requires an ENG spl, but the unlocked bootloader should be enough. The file you want is: recovery-RA-sapphire-v1.7.0G.img
If you get into the custom recovery alright, you can try updating to an engineering SPL using a signed zip file. Go to this thread and download "roottools". Open it up and get "hboot_2010_signed.zip". Put it in the root (not in a folder) of an sdcard, put the sdcard into your phone and boot into recovery. Look for an option to install a zip file from your sdcard.
If that doesn't work, try renaming the hboot_2010_signed.zip to SAPPIMG.zip, put it on the sdcard and boot into HBOOT mode (Volume Down + Power). It will scan the sdcard and try to install SAPPIMG.zip.
If all of that goes well, let us know.

1. i already go to htcdev used the 1.33.0014 spl and unlocked it. It says "*** UNLOCKED***"
2. i don't recovery, only fastboot
3. tried goldcard with sandisk and no sucess!

cereal86 said:
1. i already go to htcdev used the 1.33.0014 spl and unlocked it. It says "*** UNLOCKED***"
2. i don't recovery, only fastboot
3. tried goldcard with sandisk and no sucess!
Click to expand...
Click to collapse
But did you actually try to flash a recovery image from fastboot?
Download this image: AmonRA 1.7.0G Recovery image
Put your phone into fastboot USB
Open a Command Prompt, cd to the recovery-RA-blahblah.img location, then type this:
fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img
Let us know if that works.

impossible, when i send a command, i receive a error message "remote: not allow"

cereal86 said:
impossible, when i send a command, i receive a error message "remote: not allow"
Click to expand...
Click to collapse
How about:
fastboot boot recovery-RA-sapphire-v1.7.0G.img

i receive a error message "remote: not allow"

cereal86 said:
i receive a error message "remote: not allow"
Click to expand...
Click to collapse
Hmmm. Are you able to enter HBOOT mode? Turn the phone completely off (or pull the battery), then hold VOLUME DOWN and POWER until it says HBOOT.

Yes, i can enter hboot and fastboot

cereal86 said:
Yes, i can enter hboot and fastboot
Click to expand...
Click to collapse
Alright. We can try downgrading with the RUU for your phone and a goldcard. Download the RUU exe file, run it, but don't use it to install. While it's open, go into C:\ Users \ Whateveryourusernameis \ AppData (may be hidden) \ Local \ Temp \ then look for the 2 newest folders in Temp. One of them will contain "dotnetinstaller.exe" and another folder. Go into the other folder and you'll find "rom.nbh".
Run: fastboot flash nbh rom.nbh
If it still doesn't work, try it in RUU mode: fastboot oem rebootRUU (and then use fastboot flash nbh rom.nbh)
If THAT doesn't work, put the rom.nbh on the root directory of your goldcard, rename it SAPPIMG.nbh, and boot into HBOOT mode. It should be autodetected.

DasBub said:
Alright. We can try downgrading with the RUU for your phone and a goldcard. Download the RUU exe file, run it, but don't use it to install. While it's open, go into C:\ Users \ Whateveryourusernameis \ AppData (may be hidden) \ Local \ Temp \ then look for the 2 newest folders in Temp. One of them will contain "dotnetinstaller.exe" and another folder. Go into the other folder and you'll find "rom.nbh".
Run: fastboot flash nbh rom.nbh
If it still doesn't work, try it in RUU mode: fastboot oem rebootRUU (and then use fastboot flash nbh rom.nbh)
If THAT doesn't work, put the rom.nbh on the root directory of your goldcard, rename it SAPPIMG.nbh, and boot into HBOOT mode. It should be autodetected.
Click to expand...
Click to collapse
BTW, if it gives you a "main version is older" error, we can fix that.

as soon i tested all the ways, i'll report to you! BIG THANKS to you! cheers!

Let's catch up: i have an sapphire 32B S-ON G, spl 1.33.0014 unlocked, radio 2.22.19.23
1. when i run RUU i get error "bootloader version"
2. all the things i do with fastboot, receive error "remote: not allow"
2.1 when use fastboot oem rebootRUU and then use fastboot flash nbh rom.nbh, received error "Failed (remote: 43 main version check fail)"
3. using sdcard SAPPIMG.nbh (from RUU):
3.1 Non goldcard: transcend 8GB "Main Version is older!"
3.2 Goldcard: kingston 4GB "Main Version is older!"
---------- Post added at 02:10 PM ---------- Previous post was at 02:04 PM ----------
is there any tool to edit the edit NBH file and "fool" the phone?
I'll need to buy a 2gb kingston sdcard?
can i flash ruu hboot 1.76.0013 and try all the process?