[Q] rsd lite will not recognize device - Droid RAZR M Q&A, Help & Troubleshooting

So i have all of the correct drivers installed, latest version of rsd lite, correct cable, even tried running the fastboot from android sdk. Still rsd lite wont recognize the phone. My computer recognizes it, so i dont know what to do... Please help!
[EDIT] I got the computer to recognize it, but it doesn't say xt907, it only says "fastboot" under model.
Should I just try to start rsd?
[Edit] problem solved everything is back to working

Related

[Q] Anyone have good SBF instructions?

I downloaded all the proper SBF files (VRZ_MB810_2.3.15_1FF_01.sbf) and RSD Lite the drivers updated and when I go to bootloader and hook up my USB it does not show the "connected" status in RSD lite. Tried to reinstall and everything. Any thoughts or tips? I would like to get the latest update. I was rooted with Z4, but I unrooted and tried to attempt this. Please help.
Thanks.
Did you change the settings to media connection and enable usb debugging?
Yes usher debugging on and I tried all of the selections.
I would highly recommend using linux to sbf as you don't have to worry about getting the correct drivers. Instructions are at rootzwiki.com. I just did this 2 days ago to get the OTA and it was very painless.
Riddlin said:
I downloaded all the proper SBF files (VRZ_MB810_2.3.15_1FF_01.sbf) and RSD Lite the drivers updated and when I go to bootloader and hook up my USB it does not show the "connected" status in RSD lite. Tried to reinstall and everything. Any thoughts or tips? I would like to get the latest update. I was rooted with Z4, but I unrooted and tried to attempt this. Please help.
Thanks.
Click to expand...
Click to collapse
I ran into the same issue, but realized that people were using mixed terminology for two different things. Make sure that you're powering on the phone by pressing Power, Volume Down, and Camera buttons at the same time, and then wait a second or two, and release them. Then you should have some white, DOS like text show up on the screen. If you're doing the Power + Home button and pressing search button to bring up a blue text screen, that's not the right procedure for SBF. Hopefully that's all it is.
Are you using RSD Lite 4.8 or above? Try rebooting your phone and your PC. If that doesn't work, try another USB port and/or cable.
Riddlin said:
I downloaded all the proper SBF files (VRZ_MB810_2.3.15_1FF_01.sbf) and RSD Lite the drivers updated and when I go to bootloader and hook up my USB it does not show the "connected" status in RSD lite. Tried to reinstall and everything. Any thoughts or tips? I would like to get the latest update. I was rooted with Z4, but I unrooted and tried to attempt this. Please help.
Thanks.
Click to expand...
Click to collapse
Download RSDlite 4.8
Download the latest SBF
Switch your device to PC mode
Turn on debugging mode (settings>applications>development>debugging mode)
Launch RSDLite (make sure device appears in window)
Select SBF (make sure it's the .sbf and not the .zip you downloaded)
Click Start
Device will switch to bootloader and begin the flashing process and will reboot when it is complete. RSDlite will say PASS.
One thing that most people forget to include in posting sbf/rdslite instructions is that you NEED the Droid X USB drivers installed. Get it from Motorola here and your phone will then show up in RDSLite.
http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD
95cobby said:
Download RSDlite 4.8
Download the latest SBF
Switch your device to PC mode
Turn on debugging mode (settings>applications>development>debugging mode)
Launch RSDLite (make sure device appears in window)
Select SBF (make sure it's the .sbf and not the .zip you downloaded)
Click Start
Device will switch to bootloader and begin the flashing process and will reboot when it is complete. RSDlite will say PASS.
Click to expand...
Click to collapse
Yep this is exactly what I did. RSDlite does not recognize my phone. I am using Rsdlite 4.8 also.
Just tried another different computer and its working. Very odd. Well anyway I hope to report back that everything went good. I will let you know.
Make sure you have the Moto drivers installed.
All is good. Got it to work and it worked flawlessly.

[Q] RSD Lite Not Recognizing Droid 2

Hey guys, I have a Droid 2 (Non-Global) that is currently soft bricked. I have a Motorola factory cable converter (had to use it for my Razr Maxx) that I have plugged into the phone being that its battery is too low. My problem is that when I plug in the phone to the computer, RSD Lite (4.9) won't recognize the device, even though it is in the Bootloader (Error message: Err:A5,70,70,00,1F MEM_MAP Blank Service Req'd). I need to flash a sbf file to the phone so that I can unbrick it. I am fairly familiar with the unbricking process, but only using Droid Razr Utility (for my Maxx), not flashing an sbf using RSD Lite. Can anyone help with this problem?
if it's a Team Black Hat adapter it should work fine
couple of these you can do
did you install Motorola_End_User_Drivers
go to device manager. and look for unknown device
if there is an unknown device, uninstall it, it should be listed as motorola usb device
try a newer rsd lite version like RSD Lite 5.7
or try the ez way, all in one
D2 (a955) 2.3.4/4.5.621 ezSBF & Root
I tried your solution (the drivers and newer version of RSD Lite) but it still won't work. I might have to resort to the other option if nothing else works... When I plug in my phone to the computer it is recognized by the comp, but not by RSD Lite. I looked in the Device Manager and the device is listed under Motorola USB Device > Motorola Flash Interface.
D2 must say
battery ok
ok to program
Transfer Mode:
USB
Click to expand...
Click to collapse
even with the errors and usb factory cable converter
It does say that. The full screen shows:
Bootloader
D2.37
Err:A5,70,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to Program
Transfer Mode:
USB
Click to expand...
Click to collapse
I noticed that RSD Lite does not show my Razr Maxx as well, even though it's fully booted.
try the ezSBF or a different pc

[Q] Zombie Milestone 2 HELP!!!!!!!!!!!!!

Hello folks,
Ive written beforehand in here asking for a little issue I had with my milestone 2 (Assuming a dead usb port and a bootloop)
anyway I got replaced the USB connector, but My phone wont show up on RSD lite... No matter what version I use (tried everything from 4.9 to the latest, nor the drivers.) Im on win 7 ultimate x64, but tried on ubuntu, win xp and win 7x32 having no success.
The phone WONT charge over usb, even with it's usb port replaced.
Teh phone will enter stock recovery, and bootloader mode ( it´s on 07.12)
The phone will also recognize it is "connected" on bootloader (It reads USB Connected OK to program), but the PC wont recognize it.
any suggestions???
may I have to flash it with a "box"??
donlloreda said:
Hello folks,
Ive written beforehand in here asking for a little issue I had with my milestone 2 (Assuming a dead usb port and a bootloop)
anyway I got replaced the USB connector, but My phone wont show up on RSD lite... No matter what version I use (tried everything from 4.9 to the latest, nor the drivers.) Im on win 7 ultimate x64, but tried on ubuntu, win xp and win 7x32 having no success.
The phone WONT charge over usb, even with it's usb port replaced.
Teh phone will enter stock recovery, and bootloader mode ( it´s on 07.12)
The phone will also recognize it is "connected" on bootloader (It reads USB Connected OK to program), but the PC wont recognize it.
any suggestions???
may I have to flash it with a "box"??
Click to expand...
Click to collapse
Either your USB port got replaced badly, or you don't have the drivers: http://www.motorola.com/staticfiles/Support/Experiences/Global_Drivers/USB_Drivers_bit_4.7.1.zip
Try a different cable, diferent port, different computer...

HELP Possible BRICKED

I have the Droid Razr M Verizon but not the developers version.
Ap Fasboot Screen it says
----------------------------------------------------------------------------------
AP FastBoot Flash Mode (S)
10.9B(*) (sha-1e9f557,2012-10-21 17:10:35)
eMMc Info: Size 8GB
Device is Locked, Status Code:0
Battery OK
Transfer Mode:
USB Connected
FastBoot Reason: Boot menu selected
usb connected
------------------------------------------------------------------------------
I had safestrap installed as well.
I decided to backup stock. So i could install Energy Rom on Stock Slot!
I then Wiped Factory/Cache/davlick on stock slot Because i was going to restore Then my phone restarted!
I realizes that safestrap will no longer work I can acess AP Fastboot but Rsd Lite 6.14 and 5.7 will not recognizable my device.
I am Running Window 8 64-bit. When I connect my device in the Devices and Printer section it says Fastboot SMQ S
I have tried 3 different Cables
My Phone will charge!
I am willing to go without RSD Lite and do normal/old school CMD Fastboot
Could anyone Help me!!!
I wondered the same thing, but I made sure to ask first (I guess you confirmed what they said).
see the link below:
http://www.droidrzr.com/index.php/t...tock-using-ss-312/page__p__233497#entry233497
a hard factory rest could help, but not sure.
also, reading from your steps, it looks like you did a factory rest AFTER installing the ROM? that could be the problem.
I recently did the same exact thing, using the same exact ROM, and encountered the same exact problems. I used RSDlite 6.1.4, but it was on a Windows 7 machine. Do you have access to a Windows 7 computer? I'm not sure if that would be the issue. Also, did you enter the fastboot screen and then connect your cable?
When you connect the phone and are in RSD, does it still show that something is connected? I had to restore my phone and I used RSD 6.14. The phone name would not show up in RSD, but it still showed that a device was connected. I just pushed the files and it worked.
RSDlite
Try reinstalling the latest version of RSDlite. I had to on my windows 7 machine and then it worked. Also make sure the phone is in fast boot mode. Hold power + both volume buttons for 10 seconds to get there.
Check this out if you are still having issues...
http://forum.xda-developers.com/showthread.php?t=2172537
Sent from my XT907 using Xparent BlueTapatalk 2
Fixed i'm so happy
So I was able to fix my razr m.
I am running windows 8 on my main laptop and for some odd reason ADB won't work at all tried all combination to try to get it working but it wouldn', However ADB worked the first time on my secondary laptop running windows 7.
All i did was you RSD Lite 6.14 and pushed the stock rom to my droid razr m and i was back in business. I am now rooted and have safestrap installed again.
Reminder IF ANYTHING IN SAFESTRAP HAS RED TEXT DON'T TOUCH IT, THIS JUST MEANS THAT IF YOU TOUCH IT THEN SAFESTAP WILL EITHER BE DAMAGED OR DELETED. I WAS STUPID ENOUGH TO TOUCH IT.

Rsd lite does not detect my device

ok so im on kitkat with root and unlocked BL. i have to get back to JB because i want to install a custom rom which runs on JB bootloader.
The problem: The problem is that RSD LITE does not detect my device. i successfully installed all the drivers turned on USB DEBUGGING and everything is working great even my device shows up in ADB when i type adb devices the serial number of my razr m comes so adb is perfectly working. but RSD LITE does not detect my phone as i have to flash JB in order to install the custom rom. i installed drivers rebooted my pc did everything still no success. anyone who is willing to help me will be really appreciated. also i have checked several times. however i noticed someting in the windows device manger theres an unknown device detected under other devices. but my phone is transfering data perfectly and adb seems to be working.
NOTE: my cable is 100% fine as i rooted many phones with this and ran commands such as flash recovery etc so my cable is 100% perfect please dont tell me to change the cable
Thanks , Peace.
Is your device in fastboot mode? I only ask because you mentioned USB debugging... Check out this thread for details on how to use rsd it even has pictures...
We cannot teach people anything; we can only help them discover it within themselves.
ezknives said:
Is your device in fastboot mode? I only ask because you mentioned USB debugging... Check out this thread for details on how to use rsd it even has pictures...
We cannot teach people anything; we can only help them discover it within themselves.
Click to expand...
Click to collapse
OKAY SO FINALLY my device is coming up in rsd lite. there is a trick to do it. ADB INTERFACE driver is must as i saw that ADB INTERFACE installed in my pc when i plugged the phone in. and then i rebooted to to fastboot and yes RSD LITE shows a device connected in AP FASTBOOT .
THE NEXT THING IM IN STUCK IS: RSD LITE says that XML file is either broken etc. i have replaced the xml file did everything and still RSD LITE says its broken. Please help.
OKAY SO I SOLVED THE ISSUE BY DOWNLOADING A FRESH COPY OF THE XML/SBF because mine was corrupted. it was missing a little file, thats why RSD LITE was saying its broken.

Categories

Resources