ok so im on kitkat with root and unlocked BL. i have to get back to JB because i want to install a custom rom which runs on JB bootloader.
The problem: The problem is that RSD LITE does not detect my device. i successfully installed all the drivers turned on USB DEBUGGING and everything is working great even my device shows up in ADB when i type adb devices the serial number of my razr m comes so adb is perfectly working. but RSD LITE does not detect my phone as i have to flash JB in order to install the custom rom. i installed drivers rebooted my pc did everything still no success. anyone who is willing to help me will be really appreciated. also i have checked several times. however i noticed someting in the windows device manger theres an unknown device detected under other devices. but my phone is transfering data perfectly and adb seems to be working.
NOTE: my cable is 100% fine as i rooted many phones with this and ran commands such as flash recovery etc so my cable is 100% perfect please dont tell me to change the cable
Thanks , Peace.
Is your device in fastboot mode? I only ask because you mentioned USB debugging... Check out this thread for details on how to use rsd it even has pictures...
We cannot teach people anything; we can only help them discover it within themselves.
ezknives said:
Is your device in fastboot mode? I only ask because you mentioned USB debugging... Check out this thread for details on how to use rsd it even has pictures...
We cannot teach people anything; we can only help them discover it within themselves.
Click to expand...
Click to collapse
OKAY SO FINALLY my device is coming up in rsd lite. there is a trick to do it. ADB INTERFACE driver is must as i saw that ADB INTERFACE installed in my pc when i plugged the phone in. and then i rebooted to to fastboot and yes RSD LITE shows a device connected in AP FASTBOOT .
THE NEXT THING IM IN STUCK IS: RSD LITE says that XML file is either broken etc. i have replaced the xml file did everything and still RSD LITE says its broken. Please help.
OKAY SO I SOLVED THE ISSUE BY DOWNLOADING A FRESH COPY OF THE XML/SBF because mine was corrupted. it was missing a little file, thats why RSD LITE was saying its broken.
Related
Hello,
After few months with my n1, finally I decide to root and put some roms.
Even when I already have done with my magic, tatoo, and hero, I can´t handle the driver problems in my nexus one.
I could unlock the bootloader. My problems came after this step.
Ive tested few things, but I will put my last experience.
In a just-formatted windows XP sp3, I downloaded the last android SDK and Ive downloaded the usb driver (R3).
After this, I connect my nexus one phone and it asked me for the drivers, I gave the path and it was successfully installed.
I unplugged the USB cable, turn the phone off and restart in debug mode, bootlader. Plug the cable, my PC reconigzed "something", and install some driver. "Unknowledge device". So, I tried to update the driver, giving the path to the USB-driver folder (inside of android-sdk-windows folder). And nothing. It tells me that there is not a better driver for my device. And I can´t connect to my phone. Of course Ive tried uninstalling the driver and nothing. (always from control panel).
I dont know what to do. Please, give me some suggestion because im totally frustrated.
Thank you
http://theunlockr.com/2010/01/02/how-to-root-the-nexus-one/Posted Yesterday, 10:17 PM
ATT N1's can run CyanogenMod without any real trouble. The commands and guides remain the same as the Tmo N1
THE ONLY CAVEAT IS: YOU CANNOT USE CM 5.0.5.1 or 5.0.5.2 as your initial install base, as these releases were bugged. Use 5.0.5 here
For Nexus' you DO NOT NEED SUPERBOOT and steps are super easy.
Setup ADB/FASTBOOT
Fastboot oem unlock
fastboot flash recovery recovery-ra-blah-blah.img
Reboot into recovery
NANDROID
WIPE!!!! (if you dont wipe you get boot loops)
Flash CM
Flash Google (optional)
Reboot
Fastboot flash radio radio.img (unnecessary on ATT n1's)
cheloman said:
Hello,
After few months with my n1, finally I decide to root and put some roms.
Even when I already have done with my magic, tatoo, and hero, I can´t handle the driver problems in my nexus one.
I could unlock the bootloader. My problems came after this step.
Ive tested few things, but I will put my last experience.
In a just-formatted windows XP sp3, I downloaded the last android SDK and Ive downloaded the usb driver (R3).
After this, I connect my nexus one phone and it asked me for the drivers, I gave the path and it was successfully installed.
I unplugged the USB cable, turn the phone off and restart in debug mode, bootlader. Plug the cable, my PC reconigzed "something", and install some driver. "Unknowledge device". So, I tried to update the driver, giving the path to the USB-driver folder (inside of android-sdk-windows folder). And nothing. It tells me that there is not a better driver for my device. And I can´t connect to my phone. Of course Ive tried uninstalling the driver and nothing. (always from control panel).
I dont know what to do. Please, give me some suggestion because im totally frustrated.
Thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=613217
Try those drivers.
jerrycycle said:
...For Nexus' you DO NOT NEED SUPERBOOT and steps are super easy.
Click to expand...
Click to collapse
jerrycycle said:
fastboot flash recovery recovery-ra-blah-blah.img
Click to expand...
Click to collapse
Thank you by your post, it was very usefull and I could change my drivers, so I have access in debug mode to my n1. Even with this, Ive tried to apply the root with modaco´s files, using the original ERE27 pack, but, it just stucks in "copying...".
Maybe the problem is that I was instructed about I should execute the .bat, in bootloader moder (no in fastboot). I have the adb commands with fastboot mode, but, when I do: fastboot devices in bootloader mode, I dont have any device. Maybe the tutorial that I followed its wrong and should I execute directly in fastboot not in bootloader.
Anyway, Ive quoted your post, because when you say that isnt necessary, the instructions of recovery installation, says about its a "pre-requirement"
You can check it in /showthread.php?t=611829 As new user, i cant put the link to the thread of RA recovery, sorry
I dont want to mess with this, because the consequence of bad procedure.
Thank you by your help and patience.
you might want to make sure you're using the main USB ports, not those extension ones or those that are built into PC cases. I used to have the problem with "unrecognised device" because of that.
I downloaded all the proper SBF files (VRZ_MB810_2.3.15_1FF_01.sbf) and RSD Lite the drivers updated and when I go to bootloader and hook up my USB it does not show the "connected" status in RSD lite. Tried to reinstall and everything. Any thoughts or tips? I would like to get the latest update. I was rooted with Z4, but I unrooted and tried to attempt this. Please help.
Thanks.
Did you change the settings to media connection and enable usb debugging?
Yes usher debugging on and I tried all of the selections.
I would highly recommend using linux to sbf as you don't have to worry about getting the correct drivers. Instructions are at rootzwiki.com. I just did this 2 days ago to get the OTA and it was very painless.
Riddlin said:
I downloaded all the proper SBF files (VRZ_MB810_2.3.15_1FF_01.sbf) and RSD Lite the drivers updated and when I go to bootloader and hook up my USB it does not show the "connected" status in RSD lite. Tried to reinstall and everything. Any thoughts or tips? I would like to get the latest update. I was rooted with Z4, but I unrooted and tried to attempt this. Please help.
Thanks.
Click to expand...
Click to collapse
I ran into the same issue, but realized that people were using mixed terminology for two different things. Make sure that you're powering on the phone by pressing Power, Volume Down, and Camera buttons at the same time, and then wait a second or two, and release them. Then you should have some white, DOS like text show up on the screen. If you're doing the Power + Home button and pressing search button to bring up a blue text screen, that's not the right procedure for SBF. Hopefully that's all it is.
Are you using RSD Lite 4.8 or above? Try rebooting your phone and your PC. If that doesn't work, try another USB port and/or cable.
Riddlin said:
I downloaded all the proper SBF files (VRZ_MB810_2.3.15_1FF_01.sbf) and RSD Lite the drivers updated and when I go to bootloader and hook up my USB it does not show the "connected" status in RSD lite. Tried to reinstall and everything. Any thoughts or tips? I would like to get the latest update. I was rooted with Z4, but I unrooted and tried to attempt this. Please help.
Thanks.
Click to expand...
Click to collapse
Download RSDlite 4.8
Download the latest SBF
Switch your device to PC mode
Turn on debugging mode (settings>applications>development>debugging mode)
Launch RSDLite (make sure device appears in window)
Select SBF (make sure it's the .sbf and not the .zip you downloaded)
Click Start
Device will switch to bootloader and begin the flashing process and will reboot when it is complete. RSDlite will say PASS.
One thing that most people forget to include in posting sbf/rdslite instructions is that you NEED the Droid X USB drivers installed. Get it from Motorola here and your phone will then show up in RDSLite.
http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD
95cobby said:
Download RSDlite 4.8
Download the latest SBF
Switch your device to PC mode
Turn on debugging mode (settings>applications>development>debugging mode)
Launch RSDLite (make sure device appears in window)
Select SBF (make sure it's the .sbf and not the .zip you downloaded)
Click Start
Device will switch to bootloader and begin the flashing process and will reboot when it is complete. RSDlite will say PASS.
Click to expand...
Click to collapse
Yep this is exactly what I did. RSDlite does not recognize my phone. I am using Rsdlite 4.8 also.
Just tried another different computer and its working. Very odd. Well anyway I hope to report back that everything went good. I will let you know.
Make sure you have the Moto drivers installed.
All is good. Got it to work and it worked flawlessly.
So i have all of the correct drivers installed, latest version of rsd lite, correct cable, even tried running the fastboot from android sdk. Still rsd lite wont recognize the phone. My computer recognizes it, so i dont know what to do... Please help!
[EDIT] I got the computer to recognize it, but it doesn't say xt907, it only says "fastboot" under model.
Should I just try to start rsd?
[Edit] problem solved everything is back to working
I have the Droid Razr M Verizon but not the developers version.
Ap Fasboot Screen it says
----------------------------------------------------------------------------------
AP FastBoot Flash Mode (S)
10.9B(*) (sha-1e9f557,2012-10-21 17:10:35)
eMMc Info: Size 8GB
Device is Locked, Status Code:0
Battery OK
Transfer Mode:
USB Connected
FastBoot Reason: Boot menu selected
usb connected
------------------------------------------------------------------------------
I had safestrap installed as well.
I decided to backup stock. So i could install Energy Rom on Stock Slot!
I then Wiped Factory/Cache/davlick on stock slot Because i was going to restore Then my phone restarted!
I realizes that safestrap will no longer work I can acess AP Fastboot but Rsd Lite 6.14 and 5.7 will not recognizable my device.
I am Running Window 8 64-bit. When I connect my device in the Devices and Printer section it says Fastboot SMQ S
I have tried 3 different Cables
My Phone will charge!
I am willing to go without RSD Lite and do normal/old school CMD Fastboot
Could anyone Help me!!!
I wondered the same thing, but I made sure to ask first (I guess you confirmed what they said).
see the link below:
http://www.droidrzr.com/index.php/t...tock-using-ss-312/page__p__233497#entry233497
a hard factory rest could help, but not sure.
also, reading from your steps, it looks like you did a factory rest AFTER installing the ROM? that could be the problem.
I recently did the same exact thing, using the same exact ROM, and encountered the same exact problems. I used RSDlite 6.1.4, but it was on a Windows 7 machine. Do you have access to a Windows 7 computer? I'm not sure if that would be the issue. Also, did you enter the fastboot screen and then connect your cable?
When you connect the phone and are in RSD, does it still show that something is connected? I had to restore my phone and I used RSD 6.14. The phone name would not show up in RSD, but it still showed that a device was connected. I just pushed the files and it worked.
RSDlite
Try reinstalling the latest version of RSDlite. I had to on my windows 7 machine and then it worked. Also make sure the phone is in fast boot mode. Hold power + both volume buttons for 10 seconds to get there.
Check this out if you are still having issues...
http://forum.xda-developers.com/showthread.php?t=2172537
Sent from my XT907 using Xparent BlueTapatalk 2
Fixed i'm so happy
So I was able to fix my razr m.
I am running windows 8 on my main laptop and for some odd reason ADB won't work at all tried all combination to try to get it working but it wouldn', However ADB worked the first time on my secondary laptop running windows 7.
All i did was you RSD Lite 6.14 and pushed the stock rom to my droid razr m and i was back in business. I am now rooted and have safestrap installed again.
Reminder IF ANYTHING IN SAFESTRAP HAS RED TEXT DON'T TOUCH IT, THIS JUST MEANS THAT IF YOU TOUCH IT THEN SAFESTAP WILL EITHER BE DAMAGED OR DELETED. I WAS STUPID ENOUGH TO TOUCH IT.
Hello. i noticed that my computer(win 8.1) was giving a usb device not recognized error a few days ago. i didn't fix and eagerly updated to android 4.4.3, but forgot to disable freedom and now can't use google play services. i can fix that but the DAMN PHONE STILL ISN'T RECOGNIZABLE BY THE DAMN COMPUTER. i have tried multiple cables and installed win 8 dual boot but still got the same error. i also tried to reinstall drivers. but i think i didnot do it right.
both adb and fastboot are not working. if u could tell me a method to install a custom recovery without root and adb that would sove half my problems but still need help getting the computer to recognized the phone.
Normally this is a problem with charging block of the phone.
You have to root to flash recovery without a computer, towelroot works on 4.4.3. Once rooted you can use goomanager app to flash twrp recovery.
Does the PC making sound of connected I disconnected continually?