Hi everyone! I've updated my HTC HD2 OS few days ago from adroid 2.3.5 ( GBrid ) to 4.2.1 ( JBean).. it boots normally the stick together, htc and android screen show up.. but it won't go throw that..
I've tried to go into clockworkmod but i couldn't and the bootloader telling me that the " security Unlocked ".. like i couldn't to change the hspl thing..
please guy's i need help..
...
and this is a video that how the hd2 work's with me
in a rar file
the vieled said:
Hi everyone! I've updated my HTC HD2 OS few days ago from adroid 2.3.5 ( GBrid ) to 4.2.1 ( JBean).. it boots normally the stick together, htc and android screen show up.. but it won't go throw that..
I've tried to go into clockworkmod but i couldn't and the bootloader telling me that the " security Unlocked ".. like i couldn't to change the hspl thing..
please guy's i need help..
Click to expand...
Click to collapse
The HD2 doesn't say "Security Unlocked", you mean it has "HSPL".
You couldn't change the "hspl thing"? Why do you want to change it?
From the video, I assume it's cLK with Android on NAND, so no need for HSPL changing. And if that's the case, depending on the version you have, you need to repartition for JellyBean (bigger system partition than Gingerbread). But we still don't know why you couldn't get into the clockworkmod recovery. That being said, how could you flash JB when you were not even able to access the recovery?
...argh, your post is a mess. Needless to say how irrelevant your title is to your post content.
Please don't panic, and tell us everything about your phone.
Your H/SPL version, your radio, your bootloader, your setup.
We need more info in order to be able to help you.
I'm so sorry I didn't describe it very well for u.. coz i'm new on android and don't know very much..
when I flash the phone, I was able to access the recovery mood from the reboot choice inside the OS ( gingerbread ), but now without goin into the OS I can't use the recovery mood again..
and this what i see in the bootleader screen..
security Unlocked
PB81*** SS-B3
SPL-2.08.HSPL 8G XE
0x05
CotuIIaHSPL 0x50
these are on the red screen
serial
and this is in the white one
I'm soooo sorry again about the distribution but I'm not really good in English..
I hope I give the needed information
Thank you very much..
I am going to go by the assumption that you have cLK. But I need you to verify which version it is. Power off the phone, then power on while holding the back button. Tell me what shows up.
Depending on the version you're going to have to
-Boot up phone with back button held. Choose Settings > Resize Partitions. (If you have the new cLK)
-Use the HD2 NAND Toolkit (google it) to repartition your system. (If you have the old cLK)
How to know which cLK you have?
If you do what I told you earlier (Hold back + boot) and you see
*a bunch of unorganized lines, you have the old cLK.
*some options that you can navigate and choose from using your volume rockers, you have the new cLK.
After repartitioning, on either versions you can access the recovery by 1-powering off the phone. 2-power on with "Home" button held. Reflash the ROM on the new partition sizes mentioned on the OP of the ROM's thread and you should be good to go.
Marvlesz said:
I am going to go by the assumption that you have cLK. But I need you to verify which version it is. Power off the phone, then power on while holding the back button. Tell me what shows up.
Depending on the version you're going to have to
-Boot up phone with back button held. Choose Settings > Resize Partitions. (If you have the new cLK)
-Use the HD2 NAND Toolkit (google it) to repartition your system. (If you have the old cLK)
How to know which cLK you have?
If you do what I told you earlier (Hold back + boot) and you see
*a bunch of unorganized lines, you have the old cLK.
*some options that you can navigate and choose from using your volume rockers, you have the new cLK.
After repartitioning, on either versions you can access the recovery by 1-powering off the phone. 2-power on with "Home" button held. Reflash the ROM on the new partition sizes mentioned on the OP of the ROM's thread and you should be good to go.
Click to expand...
Click to collapse
THANKKK YOU BUDDY really thank you...
al hamdulilah.. u save me lol
thank you very much u expert ;P
the back button did not work with me..
i tried the other way to power on while pressing the home button and it show a some lines with some information.. after that the cLK shows up )) thank you veryy much
but will u please can u advice me what version is good to use for HD2.. but please i wanna try the Jellybean one tyyyyyy
the vieled said:
THANKKK YOU BUDDY really thank you...
al hamdulilah.. u save me lol
thank you very much u expert ;P
the back button did not work with me..
i tried the other way to power on while pressing the home button and it show a some lines with some information.. after that the cLK shows up )) thank you veryy much
Click to expand...
Click to collapse
That doesn't make sense; on cLK, the back button is to access cLK's main and the Home is to access recovery. But it doesn't matter as long as you have got it working. (But if you're confusing CWM, the recovery, with cLK, the bootloader, you're gonna have a bad time)
but will u please can u advice me what version is good to use for HD2.. but please i wanna try the Jellybean one tyyyyyy
Click to expand...
Click to collapse
If you already know what you want, why ask for advice?
Sorry, I can't give you any. But I can tell you that as of this moment, there is no JB 4.2.1 with Wi-Fi. So if you need wifi or you don't have a data plan you need to stick to 4.1.2. Again, I can't recommend any ROM. Glad to be of help.
Related
Before I start I googled and tried methods I could and all failed.
My phone was working Link Hereperfect with no issues I had installed the DFT LEO Stock Desire NAND Rom.
A week ago it died and I charged it and powered it back up and got the white screen. It wouldnt go away until I pushed the yellow button on the back. Problem solve I would think.
Two days ago on my way to San Francisco it restarted and turned white. I tried all methods I found here and google none work. when I hold the down vol button I do get the 3 color screen and thats it. I attached an picture of what my phone says.
bump please help
isaiah33 said:
bump please help
Click to expand...
Click to collapse
bump for what? You are just stating what happened to your phone.
My boys hd2 did this too... I plan on doing some extensive trouble shooting later this week so ill try to help you out if I can get it fixed. I guess, bottom line is, if you want android, buy an android device. ;-P
Sent from my HTC Glacier using XDA App
help us to help you
@jose makalolot
I like your answer... full of sense
@isaiah33
Do you realize that you didn't ask anything?
Do you post these nice explanations to inform us that stopping a device by removing suddenly its power supply is not good?
Then ok, thanks. Ask for a sticky.
@crx4xharder
If you're boy's phone can only boot in the first level loader... I think a week-end if long enough to make extensive trouble shooting
Ok, I agree I'm not nice... it's just to make you realize that if you want to ask someting... then ask, no need to make us imagine the question you may want someone to answer.
My question is how do I get this fixed? How do I get android back up and running. I want to get rid of this white screen.
isaiah33 said:
My question is how do I get this fixed? How do I get android back up and running. I want to get rid of this white screen.
Click to expand...
Click to collapse
What was the version of MAGLDR you had anyway? The ROM you are/were running is outdated by today's standards anyway.
I would do a task29 and start over. Then flash MAGLDR 1.3, CWM 1.3 and then a new ROM.
isaiah33 said:
My question is how do I get this fixed? How do I get android back up and running. I want to get rid of this white screen.
Click to expand...
Click to collapse
If you get bootloader simply flash a stock WM rom or MAGLDR, whats hard about that?
i tried flashing with task29 but it sticks at 0%
Do not use task29 for your problem. Fortunatly it doesn't "clear" the first level bootloader.
Press the vol-down key.
In boot loader, flash:
a/ a WM6 ROM (to do this you can just put a LEOIMG.nhh on the root of your SD)
b/ MAGLDR (the version you need for the build you want)
If you want to put a DFT build. In MAGLDR (so press "end call" and start the phone... keep end call pressed) choose the option "USB flasher" (something like this.
With DFT (in admin) flash:
a/ a DFT build
b/ CWM
If CWM, boot in MAGLDR, choose "AD Recovery" (for CWM 1.13)
In CWM choose the option to flash a zip build.
That's all... good question, good answer.
All what I said if well expained in diffferent sticky. You will find there a lot of step-by-step or video explanations.
Hope this helps.
He doesn't need to clear the first-level bootloader. You can see from his screenshots that he gets into the bootloader just fine. Task29 will format the NAND storage just as flashing a WinMo ROM does. The RUU does a task29 as part of the flashing process anyway. Doing just a task29 saves the time of flashing the ROM.
Either way, you don't "flash" task29. You run the command via mtty. I'm not sure I understand exactly what you're saying when you "flash" task29 and it stayed at 0%.
What was the meaning of my "Fortunatly"
Clear the first level... brick the phone.
So for you task29 is equivalent to flashing a WM?
With or without radio?
(real question, I really don't know exactly what it's doing...)
I know that it "cleans" the NAND but it's not enough for me.
Anyway, I realize it will be better for me to read the dedicated thread or search on google.
For him I keep my advice to do all (task29, full flash from the beggining including WM). It's useless normally but as he has a problem...
Digital Outcast said:
He doesn't need to clear the first-level bootloader. You can see from his screenshots that he gets into the bootloader just fine. Task29 will format the NAND storage just as flashing a WinMo ROM does. The RUU does a task29 as part of the flashing process anyway. Doing just a task29 saves the time of flashing the ROM.
Either way, you don't "flash" task29. You run the command via mtty. I'm not sure I understand exactly what you're saying when you "flash" task29 and it stayed at 0%.
Click to expand...
Click to collapse
For HD2 "mtty" is not required, there is a task29 nbh.
truc007 said:
Do not use task29 for your problem. Fortunatly it doesn't "clear" the first level bootloader.
Press the vol-down key.
In boot loader, flash:
a/ a WM6 ROM (to do this you can just put a LEOIMG.nhh on the root of your SD)
b/ MAGLDR (the version you need for the build you want)
If you want to put a DFT build. In MAGLDR (so press "end call" and start the phone... keep end call pressed) choose the option "USB flasher" (something like this.
With DFT (in admin) flash:
a/ a DFT build
b/ CWM
If CWM, boot in MAGLDR, choose "AD Recovery" (for CWM 1.13)
In CWM choose the option to flash a zip build.
That's all... good question, good answer.
All what I said if well expained in diffferent sticky. You will find there a lot of step-by-step or video explanations.
Hope this helps.
Click to expand...
Click to collapse
I tried updating the stock rom and it has a issue when it comes to the radio it says Radio Fail. This is the right rom I downloaded it off the tmobile website. I dont know why its failing. If you could help truc007 I am willing to help donate to you if I ge it working.
I couldnt flash the task29 so I ran the commands in mtty and flashed a rom and booted, still wsod...
Just flash back to the original ROM, then update radio, install magldr.
isaiah33 said:
Before I start I googled and tried methods I could and all failed.
My phone was working Link Hereperfect with no issues I had installed the DFT LEO Stock Desire NAND Rom.
A week ago it died and I charged it and powered it back up and got the white screen. It wouldnt go away until I pushed the yellow button on the back. Problem solve I would think.
Two days ago on my way to San Francisco it restarted and turned white. I tried all methods I found here and google none work. when I hold the down vol button I do get the 3 color screen and thats it. I attached an picture of what my phone says.
Click to expand...
Click to collapse
OK, send to me to fix it!
Hi guys,
How to run MAGLDR without booting Android?
I have problem and I can't solved it by myself. I have installed Android on my HTC HD2. I did it by MAGLDR. Now I'd like to run only Magldr without booting Android. How can I do this? Is it any hotkeys to run only MAGLDR?
I'd like to do that, because my android for some reasons stoped booting. I only can see HTC text on white background. If I put off SD Card and start booting I can see HTC text on white background and then Quietly brilliant text.
P.S. I have NAND ver. of Android which is booted by MAGLDR.
Please Help,
Greetings
Tomasz Pietrzak
Hold power key down.
Hi there,
Very simple. Just hold down the power key after your device switches on and wait. MAGLDR should boot in a sec. or 5
Pozdrowienia,
Janek.
Boot to MAGLDR (all the time)
I called myself flashing a new rom. I was running CMYLXGO 1.1.18n on my HD2. I wanted to change to Hyperdroid. After the wipe, partition, bla bla bla stuff. When I restarted the device, It failed. I decided to return back to the CMY rom to make sure I did not ruin my phone. Did the wipe, and all that stuff again.
Long story short, now if I pull the battery, turn it on, I boot straight to MAGLDR (not holding the button). I have to select option 3 (boot to ad nand). Then everything runs fine. What did I do wrong?
Running
SPL 2.08
MAG 1.3
Kernel 2.6.32.15raf
I still would like to switch to Hyperdroid -
Thanks in advance.
jwgizmo said:
I called myself flashing a new rom. I was running CMYLXGO 1.1.18n on my HD2. I wanted to change to Hyperdroid. After the wipe, partition, bla bla bla stuff. When I restarted the device, It failed. I decided to return back to the CMY rom to make sure I did not ruin my phone. Did the wipe, and all that stuff again.
Long story short, now if I pull the battery, turn it on, I boot straight to MAGLDR (not holding the button). I have to select option 3 (boot to ad nand). Then everything runs fine. What did I do wrong?
Running
SPL 2.08
MAG 1.3
Kernel 2.6.32.15raf
I still would like to switch to Hyperdroid -
Thanks in advance.
Click to expand...
Click to collapse
well if u want to boot directly from nand do the following things
turn on the phone
when u will see the magldr menu go to services ( # 10 if i still remmember )
u will see 5 choices ...t=choose the first : boot settings
u will see 3 choices ...choose the first boot sources and choose android from nand
go back to the last screen and choose always display menu ...it will ask u yes ( call button) or no (end call button) ...press end call end go back to reboot ...now u will boot directly to ur rom
for the part about changing to hyperdroid ...u ned to know the exact recovery partition to use ...for hyperdroid 150mb and for CMYLXGO 1.1.18 400mb ( i think so cuz it's a sense rom) ...so flash 150mb recovery partition and install hyperdroid ...
hope that helped u
Big thanks
Yes you fixed it. Thank you....
I'll work on the Hyperdroid later.
jwgizmo said:
Yes you fixed it. Thank you....
I'll work on the Hyperdroid later.
Click to expand...
Click to collapse
dont forger To hit The thanks Burton
now all u need to do is install the newest clwm and click on fix permissions,then GET RID of hyperdroid and get ultimate droid 3.3,the best rom ive EVER had on my hd2,tried over 100 roms over the last 20 months and ive stuck with this 1 for 3 months instead of 3 days lol,it has EVERYTHING built,all the **** removed,WORLD CLASS,only thing that could beat it is a htc thunderbolt rom or a htc sensation rom on a hd2,that would b ****in sick and i'd wet myself lol
Sent from my HTC HD2 using XDA App
hi, i have HTC HD2 with NAND android with magldr,and yesterday the phone show me sime error,I don't remeber what was,i have onle "Force Stop" botton,but the error shows again and again,and i turn the restart but. and the phone die ,Now i can't turn it on,is there a way to activate magldr,the phone don;t recognise the USB cable ,the battery is full...
a cant go to bootloader the volume key not work!What to do,please
hey anybody here??????????????????
Open it fix the volume key hardware prob, will be a help for u in future too. No other solutn i have got
Sent from my HTC HD2 using xda premium
So i tried flashing an android ROM but its stuck on the AD recovery go go go screen.
I also wanna task 29 but I don't know how to get to the bootloader from MAGLDR 1.3
someone help please !
ummm i dunno if magldr can switch you into the bootloader, but doesn't the regular way to get to the bootloader work?
regular way:
1. make sure phone is OFF...take out the battery and plug it back in to make sure
2. hold down the volume down button
3. tap the power/end call button to power on the device
4. keep holding down volume down button
...bootloader should appear!
i guess you are a senior member so you must be looking for something else, it can't be as simple as above, is it?
ASCIIker said:
ummm i dunno if magldr can switch you into the bootloader, but doesn't the regular way to get to the bootloader work?
regular way:
1. make sure phone is OFF...take out the battery and plug it back in to make sure
2. hold down the volume down button
3. tap the power/end call button to power on the device
4. keep holding down volume down button
...bootloader should appear!
i guess you are a senior member so you must be looking for something else, it can't be as simple as above, is it?
Click to expand...
Click to collapse
i tried that...despite it...it goes to the MAGLDR menu
and USB flasher keeps saying WAIT USB !!
basically I am stuck in MAGLDR
someone please help
i downloaded HD2 NAND kit...
and was ablt to reformat the Magldr Partition...
that time somehow the USB flasher seems to work,,,
however for every other function...it fails...like task 29 etc..
i am really confused and don't know what to do !!
backlashsid said:
someone please help
i downloaded HD2 NAND kit...
and was ablt to reformat the Magldr Partition...
that time somehow the USB flasher seems to work,,,
however for every other function...it fails...like task 29 etc..
i am really confused and don't know what to do !!
Click to expand...
Click to collapse
Mate,
how about flashing stock rom via SD? dont use your old sd, get the new one, and try to flash the stock rom.
If you can pass that, then you can go back to try magldr again
or else,
I think it may be a hardware issue related, may be the volume down button is damaged. If this the case, since you are in android nand, you cant flash stock rom from USB sync
I hope that is not the case though
goodluck
silverwind said:
Mate,
how about flashing stock rom via SD? dont use your old sd, get the new one, and try to flash the stock rom.
If you can pass that, then you can go back to try magldr again
or else,
I think it may be a hardware issue related, may be the volume down button is damaged. If this the case, since you are in android nand, you cant flash stock rom from USB sync
I hope that is not the case though
goodluck
Click to expand...
Click to collapse
surprisingly the VOL DOWN key is not at all damaged..
cos in the magldr menu I am able to go down and choose USB Flasher
I tried to install the DESIRE STOCK NAND ROM by clicking on DDAF and it worked
howerver the ROM got stuck at the DFT logo
ALso I am not at all able to get to the bootloader screen !! any ideas what to do ??? i guess flashing via SD wont work if I cant get to the bootloader
EDIT: I am able to install DAF.exe type ROMS...just installed Windows Phone 7 works...but the problem still is me wanting android and preferably at a time the old win mo...and without bootloader dont know what to do !! Help
backlashsid said:
surprisingly the VOL DOWN key is not at all damaged..
cos in the magldr menu I am able to go down and choose USB Flasher
I tried to install the DESIRE STOCK NAND ROM by clicking on DDAF and it worked
howerver the ROM got stuck at the DFT logo
ALso I am not at all able to get to the bootloader screen !! any ideas what to do ??? i guess flashing via SD wont work if I cant get to the bootloader
EDIT: I am able to install DAF.exe type ROMS...just installed Windows Phone 7 works...but the problem still is me wanting android and preferably at a time the old win mo...and without bootloader dont know what to do !! Help
Click to expand...
Click to collapse
Hey blackashsid, sorry to hear you are having troubles. Without being able to get to the SPL bootloader you will not be able to flash any .nbh file to your HD2. This translates to you not being able to flash a Windows Mobile ROM stock or custom, a different radio version, splash screen, any HSPL or SPL, or cLK. And yes flashing via SD card is no good to you without the SPL bootloader.
Option #5 USB Flasher in MAGLDR will only flash CWM or A DAF ROM.
Your issue is somewhat strange to me, I really don't understand why you are having this issuer unless it is hardware related.
T-Macgnolia said:
Hey blackashsid, sorry to hear you are having troubles. Without being able to get to the SPL bootloader you will not be able to flash any .nbh file to your HD2. This translates to you not being able to flash a Windows Mobile ROM stock or custom, a different radio version, splash screen, any HSPL or SPL, or cLK. And yes flashing via SD card is no good to you without the SPL bootloader.
Option #5 USB Flasher in MAGLDR will only flash CWM or A DAF ROM.
Your issue is somewhat strange to me, I really don't understand why you are having this issuer unless it is hardware related.
Click to expand...
Click to collapse
yeah its strange !
its like i am stuck with MAGLDR
and ders no way to uninstall it or to get to the bootloader for a WM ROM !!
any ideas what is causing this ??
i will really appreciate it !
EDIT: also i noticed all of my DAF ANdroid ROMS get stuck at the splash screen...only WP7 made it !! i want android !
any reason why this happend ?
if you installed wp7 then it isnt an issue wth the phone, its quite possible the roms you are trying to install
Download again the rom you want to use... and make sure you read installing process - every android rom has his specific installing process - clockwork , ext3 ,ex4 etc etc.
I hope you solve your prolem
ubejd said:
Download again the rom you want to use... and make sure you read installing process - every android rom has his specific installing process - clockwork , ext3 ,ex4 etc etc.
I hope you solve your prolem
Click to expand...
Click to collapse
i did ! man...nothing works...its like i am stuck with Magldr !! can do nothing !
Hi people im Marc from holland and i have a big problem.
I have a HTC HD2 and a while ago i flashed it to Android ( I am a total Noob ) so dont ask with rom it was..verry verry stupid me. The phone worked verry well with the android but at once it started Boot looping and it wont stop until i remove the battery.
Ive tried to start with the power button and the vol - button, this taked me to the RGB colored screen. on the screen are the words...
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
At the buttom in the middle it says Serial.
This is the only thing i see or i can do because there is NO menu to reset or wipe the complete memory. Last but not least I cant connect to PC it wont recognize it (using XP )
So again phone button and vol + or down in all the combi,s it does nothing.
Anybody suggestions ?
Sorry voor my bad english, I hope people can understand what i am typing here.
Greeeeetzzzz from Holland.
Ltbozz said:
Hi people im Marc from holland and i have a big problem.
I have a HTC HD2 and a while ago i flashed it to Android ( I am a total Noob ) so dont ask with rom it was..verry verry stupid me. The phone worked verry well with the android but at once it started Boot looping and it wont stop until i remove the battery.
Ive tried to start with the power button and the vol - button, this taked me to the RGB colored screen. on the screen are the words...
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
At the buttom in the middle it says Serial.
This is the only thing i see or i can do because there is NO menu to reset or wipe the complete memory. Last but not least I cant connect to PC it wont recognize it (using XP )
So again phone button and vol + or down in all the combi,s it does nothing.
Anybody suggestions ?
Sorry voor my bad english, I hope people can understand what i am typing here.
Greeeeetzzzz from Holland.
Click to expand...
Click to collapse
try this
turn phone on and hold down the power button see if that takes you into
the magldr menu
No that wont help, i only see the RGB screen with the information i typte before.
Ltbozz said:
No that wont help, i only see the RGB screen with the information i typte before.
Click to expand...
Click to collapse
dont use the volume key at all
just turn phone on and then hold down the power key
YES !!! it does. Finally 1 step further.
What do you think is the best way to go ?
Ltbozz said:
YES !!! it does. Finally 1 step further.
Click to expand...
Click to collapse
ok good
now scroll down to ad recovery and select it ...
also do you know if the rom zip is still on your sdcard
Hmm i dont think so.
Ltbozz said:
Hmm i dont think so.
Click to expand...
Click to collapse
hmmmmms maybe you have it on your comp somewhere
just trying to avoid unneeded steps cause now we need to know what
partition size you have and if you have the rom on your pc still
i can tell by which one it is
or you can download a cm7 rom and put it on your sdcard
and flash it to see if it boots up ok
this is one of the best cm7 roms
http://forum.xda-developers.com/showthread.php?t=933951
Kameirus said:
hmmmmms maybe you have it on your comp somewhere
just trying to avoid unneeded steps cause now we need to know what
partition size you have and if you have the rom on your pc still
i can tell by which one it is
or you can download a cm7 rom and put it on your sdcard
and flash it to see if it boots up ok
this is one of the best cm7 roms
http://forum.xda-developers.com/showthread.php?t=933951
Click to expand...
Click to collapse
You should probably do a full backup in CWM first. That way, once you flash another ROM to see if it's working, you'll also be able to restore your data later.
Also, be careful of your battery. Don't forget that you can't charge the phone when it's off, so only turn it on when you're backing up and when you're flashing the new ROM (i.e. don't just leave it on in CWM) otherwise you may end up having to cut open one of your micro USB cables.
Nigeldg said:
You should probably do a full backup in CWM first. That way, once you flash another ROM to see if it's working, you'll also be able to restore your data later.
Also, be careful of your battery. Don't forget that you can't charge the phone when it's off, so only turn it on when you're backing up and when you're flashing the new ROM (i.e. don't just leave it on in CWM) otherwise you may end up having to cut open one of your micro USB cables.
Click to expand...
Click to collapse
yes excatly
Thanks Nigeldg its been a long night
im out of thanks for the day but will hit ya up as soon as they reset back to 8 lol
Kameirus said:
yes excatly
Thanks Nigeldg its been a long night
im out of thanks for the day but will hit ya up as soon as they reset back to 8 lol
Click to expand...
Click to collapse
Lol np, forgot about the time difference between UK and US, it's 13:30 here. Long night, eh?
Kameirus said:
hmmmmms maybe you have it on your comp somewhere
just trying to avoid unneeded steps cause now we need to know what
partition size you have and if you have the rom on your pc still
i can tell by which one it is
or you can download a cm7 rom and put it on your sdcard
and flash it to see if it boots up ok
this is one of the best cm7 roms
http://forum.xda-developers.com/showthread.php?t=933951
Click to expand...
Click to collapse
Thanks everyone,
The problem now is that i cant connect to the pc. So i cant copy anything to the SDcard.
Edit: Now i can enter the Sdcard. But what do i need to copy there ?
Ltbozz said:
Thanks everyone,
The problem now is that i cant connect to the pc. So i cant copy anything to the SDcard.
Click to expand...
Click to collapse
Explain? You should use more details in your posts,,, in what way wont it connect?
Don't expect activesync to show a connection cos it wont.
Go into magldr, option 8 ad recovery, next choose mounts and storage - mount SD card and it should show as a removable drive in windows.
Yes youre wright. i do have a connection now.
Whats the next step ?
Ltbozz said:
Yes youre wright. i do have a connection now.
Whats the next step ?
Click to expand...
Click to collapse
Come on, at least try to figure something out by yourself.
1. Make a ROM backup in CWM if you haven't already done so
2. Copy the downloaded zip ROM to your SD card
3. Enter CWM and flash the new ROM
4. At this point you should probably boot into the ROM purely in order to charge it fully
5. Go back into CWM, then into advanced restore and restore your data partition.
Nigeldg said:
Come on, at least try to figure something out by yourself.
1. Make a ROM backup in CWM if you haven't already done so
2. Copy the downloaded zip ROM to your SD card
3. Enter CWM and flash the new ROM
4. At this point you should probably boot into the ROM purely in order to charge it fully
5. Go back into CWM, then into advanced restore and restore your data partition.
Click to expand...
Click to collapse
1 : My english is not super so i dont understand everything here on this site.
2 : Here in holland a HD2 is not verry cheap and i am not rich, i almost bricked one and that is one to many.
So sorry if im asking allot but i want to be sure that im doing it right so i dont breake my HD2.
Thanks for youre info, i have put the stock rom back in the phone and later on i will instal android again.
Greeetzzzz
Now you are back with stock rom, get a latest SD ICS build, risk free (almost)
you can play with ics goodness while you read up on nand.
The safety of old winmo 6 is only a reboot away...
Sent from my HD2 using the power of ICS
Hello guys. Pls help me. I have flashed SPL-2.08.HSPL,Radio that support 576 MB RAM,DFT MAGLDR Bootloader v1.13. So now its set to flash win 7.8 rom using MAGDLR. But the problem is here. My call button or green button is not working. Because of this i cant select 10.Services. To SELECT THE OPTIONS IN MAGDLR BOOTER I NEED THAT GREEN BUTTON TO WORK. But its not working. so guys is there any other option to proceed further and install win 7.8? Pls help. Really urgent.:crying:
nani_kishore said:
Hello guys. Pls help me. I have flashed SPL-2.08.HSPL,Radio that support 576 MB RAM,DFT MAGLDR Bootloader v1.13. So now its set to flash win 7.8 rom using MAGDLR. But the problem is here. My call button or green button is not working. Because of this i cant select 10.Services. To SELECT THE OPTIONS IN MAGDLR BOOTER I NEED THAT GREEN BUTTON TO WORK. But its not working. so guys is there any other option to proceed further and install win 7.8? Pls help. Really urgent.:crying:
Click to expand...
Click to collapse
Afaik, no
gilbert32 said:
Afaik, no
Click to expand...
Click to collapse
how about using cLK with touch recovery.
can u tel me how to do it? Pls..
samsamuel said:
how about using cLK with touch recovery.
Click to expand...
Click to collapse
Hello sam, Can u tel me the procedure how to do it? Pls sam. Waiting for ur reply. Thanks.
lol,id love to help but ive never yused either clk or touch recovery.
Don't you want wp7.8 on your phone? if so, clk won't do you any good.
But if you want to install android on it, clk is great as i've used it for some months till now.
I'll be ready to help you if you want
Thanks gilbert!!!
gilbert32 said:
Don't you want wp7.8 on your phone? if so, clk won't do you any good.
But if you want to install android on it, clk is great as i've used it for some months till now.
I'll be ready to help you if you want
Click to expand...
Click to collapse
Thanks for ur reply man. But u know my problem right? My call button is not working in my phone. So if i can install android without using call button please help me man. Thanks...:good:
Yes i know about that. This will be about installing android with clk on your hd2:
(I assume only your green call button is not working)
1- Download clk from here: http://www.mediafire.com/?nhyausx0p5whu#tzg7whl9wwaih . go to compiled test versions, and download one of the latest ones (black_lk_20130314-Ex-TWRP.......zip). This is black clk that comes with twrp recovery preinstalled.
2-install it like any other nbh file (via hd2 toolkit is the easiest)
3-once done, go to recovery by holding back button after booting, using vol up/dn buttons to navigate and menu key to open recovery
4-copy a rom to your sd card and flash it via recovery.
5-Enjoy
gilbert32 said:
Yes i know about that. This will be about installing android with clk on your hd2:
(I assume only your green call button is not working)
1- Download clk from here: http://www.mediafire.com/?nhyausx0p5whu#tzg7whl9wwaih . go to compiled test versions, and download one of the latest ones (black_lk_20130314-Ex-TWRP.......zip). This is black clk that comes with twrp recovery preinstalled.
2-install it like any other nbh file (via hd2 toolkit is the easiest)
3-once done, go to recovery by holding back button after booting, using vol up/dn buttons to navigate and menu key to open recovery
4-copy a rom to your sd card and flash it via recovery.
5-Enjoy
Click to expand...
Click to collapse
What about the partitions?
He still needs to go to clk's settings and select options there using the call button.
Maybe, JUST maybe he can use fastboot to resize partitions?
I know that that's possible in earlier original cLK versions, but not sure about the new ones.
You can use the ToolKit to repartition cLK, then install a touch recovery, but I am not sure if that's gonna work.
Marvlesz said:
What about the partitions?
He still needs to go to clk's settings and select options there using the call button.
Maybe, JUST maybe he can use fastboot to resize partitions?
I know that that's possible in earlier original cLK versions, but not sure about the new ones.
You can use the ToolKit to repartition cLK, then install a touch recovery, but I am not sure if that's gonna work.
Click to expand...
Click to collapse
I forgot about that
Regarding partitions, in black clk (the one in the link i gave) you can use windows button instead of green button even in partition resize menu (i just tested it ) (I think windows button acts exactly as the green button so it's like a replacement)
fastboot is also possible as stated in the info menu in clk
(
fastboot oem part-resize name:size
=>Resize partition with given name to new size in MB
)
Hopefully You succeed
And Hopefully you Don't encounter any problems in roms because of the green button
btw:
If you don't know what partition size to use; it's definitely mentionned at the rom's thread
I prefer making a 390MB system partition and using DATAonEXT as it gives me 3gb internal storage (because i have a 3gb ext partition on my sd)
Thanks alot Gilbert.
Hey Gilbert bro. Its working fine.No issues. . Thanks for ur help. My htc hd2 s running Jellybean android now. Thanks alot man. If i could hit thanks button 1000 times i will do it man. But there is no option to hit 1000 times.:laugh: Thanks man. Gilbert i think u should open a thread how to install android without using call button.. I think it wil help others. Anyways c ya. thanks alot.