Database Users

MAGLDR Problem

hi,
MAGLDR doesn't recognize my sd card . i can't use usb mass storage , AD SD => CWM . apparently all the roms i want are released az ZIPs ...
is there a fix for that ?

Are you using magldr 1.13? If so you need to use the new CWM 1.3 partitions which now installs the partition onto NAND, so to use CWM you need to boot into the AD Recovery option from menu and not Boot AD SD. There is also no need to copy files to root of sd card.
There is a problem with magldr usb mass storage, but if you boot to CWM, select mount and storage and the usb storage you can copy perfectly.

hi
my problem is with the bootloader screen. After installing magldr 1.13 i could not start the ppc in bootloader mode. i have tried many key combinations and etc.. but it is still starting with magldr after a short white htc screen. So now i cannot load any official or custom winmo firmware. None of the android nand fw are working. Now i only can use winphone 7 with limited abilities.. Can anyone tell me the way to solve this and go back to original rom?
thanks

exxx80 said:
hi
my problem is with the bootloader screen. After installing magldr 1.13 i could not start the ppc in bootloader mode. i have tried many key combinations and etc.. but it is still starting with magldr after a short white htc screen. So now i cannot load any official or custom winmo firmware. None of the android nand fw are working. Now i only can use winphone 7 with limited abilities.. Can anyone tell me the way to solve this and go back to original rom?
thanks
Click to expand...
Click to collapse
When you say you can not start in bootloader, bootloader is started by turning the phone off, holding in the vol down button only and turning on the phone.
The phone should not even get to the white htc screen.
If you get into the tri-colour screen you can get back to a stock rom to start again.

waspsl said:
When you say you can not start in bootloader, bootloader is started by turning the phone off, holding in the vol down button only and turning on the phone.
The phone should not even get to the white htc screen.
If you get into the tri-colour screen you can get back to a stock rom to start again.
Click to expand...
Click to collapse
Yes exactly thats what i m doing. But it passes to magldr. I even have reset from the red button at the back but no way to bootloader

@ClydeB1 : so i have to install the new CWM using the USB Flasher and it'll boot from AD Recovery ? thats good news i guess ...
will it let me install ZIP roms ? also i have a 512Leo . why would i (or anyone) want to partition NAND ?!?

MTN_HD2 said:
@ClydeB1 : so i have to install the new CWM using the USB Flasher and it'll boot from AD Recovery ? thats good news i guess ...
will it let me install ZIP roms ? also i have a 512Leo . why would i (or anyone) want to partition NAND ?!?
Click to expand...
Click to collapse
Yes, install the appropriate cwm partition by going to usb flasher and running daf.exe. Then the phone will reboot to magldr, select AD recovery and you can then flash zip roms or updates, backup etc etc etc.... I have a 512 device also, so no problems.
I guess one of the reasons for running recovery off NAND is that not all users could get the sd based recovery to work.

exxx80 said:
hi
my problem is with the bootloader screen. After installing magldr 1.13 i could not start the ppc in bootloader mode. i have tried many key combinations and etc.. but it is still starting with magldr after a short white htc screen. So now i cannot load any official or custom winmo firmware. None of the android nand fw are working. Now i only can use winphone 7 with limited abilities.. Can anyone tell me the way to solve this and go back to original rom?
thanks
Click to expand...
Click to collapse
I have the same problem here. I tried to return from my NAND Android Builts to a Windows 6.5 ROM. But after Flashing, the reboot got stuck at the logo. I tried flashing over and over again, different WinRoms, reflashed MAGLDR and even tried a combination with HSPL. nothing seems to work. I dont pass the logo, cannot enter MAGLDR or load a normal build. I kinda run out of all my magic. anyone got any suggestions?

fastscorpion2010 said:
I have the same problem here. I tried to return from my NAND Android Builts to a Windows 6.5 ROM. But after Flashing, the reboot got stuck at the logo. I tried flashing over and over again, different WinRoms, reflashed MAGLDR and even tried a combination with HSPL. nothing seems to work. I dont pass the logo, cannot enter MAGLDR or load a normal build. I kinda run out of all my magic. anyone got any suggestions?
Click to expand...
Click to collapse
What hspl version and radio are you using? To use magldr you need 2.08.hspl and radio 2.08.50.xx or higher .50 radio
I'm not sure why it would hang on reflash to winmo, but let's try get to Android.

Hi!
I am using the SPL 2.08 and When i am installing the MAGLDR111 or MAGLDR113 it's Stop in 0%
How i can install the MAGLDR?

grisantycosme said:
Hi!
I am using the SPL 2.08 and When i am installing the MAGLDR111 or MAGLDR113 it's Stop in 0%
How i can install the MAGLDR?
Click to expand...
Click to collapse
you're using Stock SPL, you need Hard SPL (HSPL)

ClydeB1 said:
Are you using magldr 1.13? If so you need to use the new CWM 1.3 partitions which now installs the partition onto NAND, so to use CWM you need to boot into the AD Recovery option from menu and not Boot AD SD. There is also no need to copy files to root of sd card.
There is a problem with magldr usb mass storage, but if you boot to CWM, select mount and storage and the usb storage you can copy perfectly.
Click to expand...
Click to collapse
You...so...rock!
I've been getting utterly frustrated with watching Windows bars filling only halfway, but your solution worked like a charm!
:good: x many!

magldr problem
hi
i was instaling the magldr on my htc hd2, but during the instalation i realise that my VOLUME UP and DOWN buttons are broken and dont work...i have to choose some option in MAGLDR but i cant...so i'm stuck here, my phone boots only MAGLDR even when i restart the phone from the red button, or even when i pull out the batery...is there some option to turn off the magldr, without using the volume buttons? please help me..in the store workers tell me that they cant fix the broken volume buttons...and now i cant use my phone... cheers...

[Q] Urgent Help Needed

So i tried flashing an android ROM but its stuck on the AD recovery go go go screen.
I also wanna task 29 but I don't know how to get to the bootloader from MAGLDR 1.3
someone help please !

ummm i dunno if magldr can switch you into the bootloader, but doesn't the regular way to get to the bootloader work?
regular way:
1. make sure phone is OFF...take out the battery and plug it back in to make sure
2. hold down the volume down button
3. tap the power/end call button to power on the device
4. keep holding down volume down button
...bootloader should appear!
i guess you are a senior member so you must be looking for something else, it can't be as simple as above, is it?

ASCIIker said:
ummm i dunno if magldr can switch you into the bootloader, but doesn't the regular way to get to the bootloader work?
regular way:
1. make sure phone is OFF...take out the battery and plug it back in to make sure
2. hold down the volume down button
3. tap the power/end call button to power on the device
4. keep holding down volume down button
...bootloader should appear!
i guess you are a senior member so you must be looking for something else, it can't be as simple as above, is it?
Click to expand...
Click to collapse
i tried that...despite it...it goes to the MAGLDR menu
and USB flasher keeps saying WAIT USB !!

basically I am stuck in MAGLDR

someone please help
i downloaded HD2 NAND kit...
and was ablt to reformat the Magldr Partition...
that time somehow the USB flasher seems to work,,,
however for every other function...it fails...like task 29 etc..
i am really confused and don't know what to do !!

backlashsid said:
someone please help
i downloaded HD2 NAND kit...
and was ablt to reformat the Magldr Partition...
that time somehow the USB flasher seems to work,,,
however for every other function...it fails...like task 29 etc..
i am really confused and don't know what to do !!
Click to expand...
Click to collapse
Mate,
how about flashing stock rom via SD? dont use your old sd, get the new one, and try to flash the stock rom.
If you can pass that, then you can go back to try magldr again
or else,
I think it may be a hardware issue related, may be the volume down button is damaged. If this the case, since you are in android nand, you cant flash stock rom from USB sync
I hope that is not the case though
goodluck

silverwind said:
Mate,
how about flashing stock rom via SD? dont use your old sd, get the new one, and try to flash the stock rom.
If you can pass that, then you can go back to try magldr again
or else,
I think it may be a hardware issue related, may be the volume down button is damaged. If this the case, since you are in android nand, you cant flash stock rom from USB sync
I hope that is not the case though
goodluck
Click to expand...
Click to collapse
surprisingly the VOL DOWN key is not at all damaged..
cos in the magldr menu I am able to go down and choose USB Flasher
I tried to install the DESIRE STOCK NAND ROM by clicking on DDAF and it worked
howerver the ROM got stuck at the DFT logo
ALso I am not at all able to get to the bootloader screen !! any ideas what to do ??? i guess flashing via SD wont work if I cant get to the bootloader
EDIT: I am able to install DAF.exe type ROMS...just installed Windows Phone 7 works...but the problem still is me wanting android and preferably at a time the old win mo...and without bootloader dont know what to do !! Help

backlashsid said:
surprisingly the VOL DOWN key is not at all damaged..
cos in the magldr menu I am able to go down and choose USB Flasher
I tried to install the DESIRE STOCK NAND ROM by clicking on DDAF and it worked
howerver the ROM got stuck at the DFT logo
ALso I am not at all able to get to the bootloader screen !! any ideas what to do ??? i guess flashing via SD wont work if I cant get to the bootloader
EDIT: I am able to install DAF.exe type ROMS...just installed Windows Phone 7 works...but the problem still is me wanting android and preferably at a time the old win mo...and without bootloader dont know what to do !! Help
Click to expand...
Click to collapse
Hey blackashsid, sorry to hear you are having troubles. Without being able to get to the SPL bootloader you will not be able to flash any .nbh file to your HD2. This translates to you not being able to flash a Windows Mobile ROM stock or custom, a different radio version, splash screen, any HSPL or SPL, or cLK. And yes flashing via SD card is no good to you without the SPL bootloader.
Option #5 USB Flasher in MAGLDR will only flash CWM or A DAF ROM.
Your issue is somewhat strange to me, I really don't understand why you are having this issuer unless it is hardware related.

T-Macgnolia said:
Hey blackashsid, sorry to hear you are having troubles. Without being able to get to the SPL bootloader you will not be able to flash any .nbh file to your HD2. This translates to you not being able to flash a Windows Mobile ROM stock or custom, a different radio version, splash screen, any HSPL or SPL, or cLK. And yes flashing via SD card is no good to you without the SPL bootloader.
Option #5 USB Flasher in MAGLDR will only flash CWM or A DAF ROM.
Your issue is somewhat strange to me, I really don't understand why you are having this issuer unless it is hardware related.
Click to expand...
Click to collapse
yeah its strange !
its like i am stuck with MAGLDR
and ders no way to uninstall it or to get to the bootloader for a WM ROM !!
any ideas what is causing this ??
i will really appreciate it !
EDIT: also i noticed all of my DAF ANdroid ROMS get stuck at the splash screen...only WP7 made it !! i want android !
any reason why this happend ?

if you installed wp7 then it isnt an issue wth the phone, its quite possible the roms you are trying to install

Download again the rom you want to use... and make sure you read installing process - every android rom has his specific installing process - clockwork , ext3 ,ex4 etc etc.
I hope you solve your prolem

ubejd said:
Download again the rom you want to use... and make sure you read installing process - every android rom has his specific installing process - clockwork , ext3 ,ex4 etc etc.
I hope you solve your prolem
Click to expand...
Click to collapse
i did ! man...nothing works...its like i am stuck with Magldr !! can do nothing !

HD2 Touch Screen-Enabled Recovery

any info on when this will be available for the hd2
i broke the volume ribbon cable so i cant navigate through magdlr

watercooled223 said:
any info on when this will be available for the hd2
i broke the volume ribbon cable so i cant navigate through magdlr
Click to expand...
Click to collapse
Search before posting
Munjeni's Touch recovery.

thanks.
is the touch available in the magdlr to navigate to recovery as both my volume buttons dont work ?

watercooled223 said:
thanks.
is the touch available in the magdlr to navigate to recovery as both my volume buttons dont work ?
Click to expand...
Click to collapse
If your volume buttons are broke you definitely should switch to cLK with touch recovery and you'll never have to worry about it again since you use the home button long press while rebooting to go into recovery, and in cLK you can use quick boot app or rom manager or power menu to reboot into recovery. Is super easy to install with the hd2 toolkit.
Sent from my 1.8ghz Galaxy Note!

roloracer said:
If your volume buttons are broke you definitely should switch to cLK with touch recovery and you'll never have to worry about it again since you use the home button long press while rebooting to go into recovery, and in cLK you can use quick boot app or rom manager or power menu to reboot into recovery. Is super easy to install with the hd2 toolkit.
Sent from my 1.8ghz Galaxy Note!
Click to expand...
Click to collapse
thanks
can you point me to a guide for that as i have never used cLK

watercooled223 said:
thanks
can you point me to a guide for that as i have never used cLK
Click to expand...
Click to collapse
Haha please search.. or check my sign.
Sent from my HTC HD2 using xda premium

problem, , , clk is flashed from bootloader, bootloader is accessed by using volume....

what should i do as i cant use the volume buttons ?
i am currently on the ics tosti

watercooled223 said:
what should i do as i cant use the volume buttons ?
i am currently on the ics tosti
Click to expand...
Click to collapse
Hmm try plugging it into your computer and try flashing im not sure but on winmo the RUU would automatically put it into bootloader

elesbb said:
Hmm try plugging it into your computer and try flashing im not sure but on winmo the RUU would automatically put it into bootloader
Click to expand...
Click to collapse
Only works under winmo, requires winmo drivers to be active, which isn't the case when android is running.
@op, your solution is to fix the volume keys.

samsamuel said:
Only works under winmo, requires winmo drivers to be active, which isn't the case when android is running.
@op, your solution is to fix the volume keys.
Click to expand...
Click to collapse
can they be hard wired ?

Sorry, no clue, never had one apart. Perhaps you could dismantle it, make the connection long enough to flash? Be warned though, many people end up breaking more, the hd2 is not easy to take apart without damage.

Well the touch recovry works with magldr too, you don't meed clk for that, but you still won't be able to use recovery.
Have you tried the htc hd2 nand toolkit? i think i heard it has an "express mode" where it install everything without you doing anything, so maybe you won't need the buttons?!
Worth a try i'm guessing.
Good luck

JimWest7997 said:
Well the touch recovry works with magldr too, you don't meed clk for that, but you still won't be able to use recovery.
Have you tried the htc hd2 nand toolkit? i think i heard it has an "express mode" where it install everything without you doing anything, so maybe you won't need the buttons?!
Worth a try i'm guessing.
Good luck
Click to expand...
Click to collapse
if i can use the touch recovery in magldr then why cant i use recovery ?
im already running android

watercooled223 said:
if i can use the touch recovery in magldr then why cant i use recovery ?
im already running android
Click to expand...
Click to collapse
my bad, thats not what i meant, sorry. i meant the touch recovery works on magldr too, you don't need clk to get touch-recovery, but you won't be able to get past magldr itself in order to get to recover (sorry, english isn't my primary language, i hope you know what i mean). have you tried the nand toolkit?

am i able to go back to windows mobile ?

sorry, cant tell you anything about winmo, haven't used it since first android built came out (a year ago?), hope you'll find the help you're looking for

ok thanks.
does anyone know if i can get windows back on the hd2 with the volume buttons working ?

update...
i stripped the phone down and got a screwdriver on the torn volume button and have navigated to recovery..
now does clk support rom manager from the market place as with that can i select to boot up to recovery and bootloader ?
or is that not possible ?

watercooled223 said:
update...
i stripped the phone down and got a screwdriver on the torn volume button and have navigated to recovery..
now does clk support rom manager from the market place as with that can i select to boot up to recovery and bootloader ?
or is that not possible ?
Click to expand...
Click to collapse
Yes and no! You can use Rom manager to boot into recovery but not into bootloader since it doesn't have an android bootloader Rom manager won't find it. If you were able to rigg the buttons while the phone is apart, I suggest make sure you have plenty of battery and reboot while pressing the volume down and when you see the tricolor screen, keep it there, plug it into the pc and open the hd2 toolkit and install cLK and then I would suggest to put the touch recovery img file into the toolkit so you can flash it while setting it up, there should be instructions in the touch recovery thread on how to add the recovery.img to the toolkit.
Sent from my 1.8ghz Galaxy Note!

stuck at CWR GO GO screen.

I made task 29 installed raido 2.15.50.14 installed magldr 1.13 and then i flashed a CWM recovery with 5/150/5 partition. I wanted to install the rom but i cant enter in AD Recovery it only stays at 123456 go go screen and nothing happened. If u can help me please write here or PM me thanks in advance.

silly question but are you pressing and holding power/end button when powering on phone?

shanman-2 said:
silly question but are you pressing and holding power/end button when powering on phone?
Click to expand...
Click to collapse
Yes but problem is still here

I'd say to reflash CWM. Holding down power button is for entering MAGLDR, not CWM

Yea and then scroll down and select AD recovery if my memory serves me correctly!!
Sent from my HTC HD2 using XDA

wowrlz123 said:
Yes but problem is still here
Click to expand...
Click to collapse
so you can't get into magldr menu... correct?
Then start again and if you still want magldr then install again and make sure you have the right partition size for rom......then install cwm recovery again..I presume you are using hd2 nand toolkit?
Then try to boot to magldr again..
edit : task29 again first!!

shanman-2 said:
so you can't get into magldr menu... correct?
Then start again and if you still want magldr then install again and make sure you have the right partition size for rom......then install cwm recovery again..I presume you are using hd2 nand toolkit?
Then try to boot to magldr again..
edit : task29 again first!!
Click to expand...
Click to collapse
123456 GO GO GO apears at launch of either ROM or CWM. Nothing except top bar appears when launching MAGLDR. So im guessing his MAGLDR is ok, but CWM may be corrupt. But you're right, if CWM reflash won't work, he'll need clean install with task29, which would probably fix the problem.
Also, please, use edit instead of doubleposting.
Cheers

I read a thread awhile back that if you have a bunch of bad blocks on your phone you will then inturn need a larger partition set up.
With that being said if the ROM calls for 5/150/5 and thats what you used maybe try a bigger partition. Also i cant remember where
but i know i read the "stuck at go go go" before as well. I will try and find it and edit this post if i do.
Click option "3" instead of "8" I think was suggested in one of the posts but i cant find where that post is.
I would post this in the Clockworkmod section. Doing a breif read/search through that thread I've seen a
few people state they were stuck at go go go as well.

the serial on bootleader won't turn to USB

Hi everyone! I've updated my HTC HD2 OS few days ago from adroid 2.3.5 ( GBrid ) to 4.2.1 ( JBean).. it boots normally the stick together, htc and android screen show up.. but it won't go throw that..
I've tried to go into clockworkmod but i couldn't and the bootloader telling me that the " security Unlocked ".. like i couldn't to change the hspl thing..
please guy's i need help..

...
and this is a video that how the hd2 work's with me
in a rar file

the vieled said:
Hi everyone! I've updated my HTC HD2 OS few days ago from adroid 2.3.5 ( GBrid ) to 4.2.1 ( JBean).. it boots normally the stick together, htc and android screen show up.. but it won't go throw that..
I've tried to go into clockworkmod but i couldn't and the bootloader telling me that the " security Unlocked ".. like i couldn't to change the hspl thing..
please guy's i need help..
Click to expand...
Click to collapse
The HD2 doesn't say "Security Unlocked", you mean it has "HSPL".
You couldn't change the "hspl thing"? Why do you want to change it?
From the video, I assume it's cLK with Android on NAND, so no need for HSPL changing. And if that's the case, depending on the version you have, you need to repartition for JellyBean (bigger system partition than Gingerbread). But we still don't know why you couldn't get into the clockworkmod recovery. That being said, how could you flash JB when you were not even able to access the recovery?
...argh, your post is a mess. Needless to say how irrelevant your title is to your post content.
Please don't panic, and tell us everything about your phone.
Your H/SPL version, your radio, your bootloader, your setup.
We need more info in order to be able to help you.

I'm so sorry I didn't describe it very well for u.. coz i'm new on android and don't know very much..
when I flash the phone, I was able to access the recovery mood from the reboot choice inside the OS ( gingerbread ), but now without goin into the OS I can't use the recovery mood again..
and this what i see in the bootleader screen..
security Unlocked
PB81*** SS-B3
SPL-2.08.HSPL 8G XE
0x05
CotuIIaHSPL 0x50
these are on the red screen
serial
and this is in the white one
I'm soooo sorry again about the distribution but I'm not really good in English..
I hope I give the needed information
Thank you very much..

I am going to go by the assumption that you have cLK. But I need you to verify which version it is. Power off the phone, then power on while holding the back button. Tell me what shows up.
Depending on the version you're going to have to
-Boot up phone with back button held. Choose Settings > Resize Partitions. (If you have the new cLK)
-Use the HD2 NAND Toolkit (google it) to repartition your system. (If you have the old cLK)
How to know which cLK you have?
If you do what I told you earlier (Hold back + boot) and you see
*a bunch of unorganized lines, you have the old cLK.
*some options that you can navigate and choose from using your volume rockers, you have the new cLK.
After repartitioning, on either versions you can access the recovery by 1-powering off the phone. 2-power on with "Home" button held. Reflash the ROM on the new partition sizes mentioned on the OP of the ROM's thread and you should be good to go.

Marvlesz said:
I am going to go by the assumption that you have cLK. But I need you to verify which version it is. Power off the phone, then power on while holding the back button. Tell me what shows up.
Depending on the version you're going to have to
-Boot up phone with back button held. Choose Settings > Resize Partitions. (If you have the new cLK)
-Use the HD2 NAND Toolkit (google it) to repartition your system. (If you have the old cLK)
How to know which cLK you have?
If you do what I told you earlier (Hold back + boot) and you see
*a bunch of unorganized lines, you have the old cLK.
*some options that you can navigate and choose from using your volume rockers, you have the new cLK.
After repartitioning, on either versions you can access the recovery by 1-powering off the phone. 2-power on with "Home" button held. Reflash the ROM on the new partition sizes mentioned on the OP of the ROM's thread and you should be good to go.
Click to expand...
Click to collapse
THANKKK YOU BUDDY really thank you...
al hamdulilah.. u save me lol
thank you very much u expert ;P
the back button did not work with me..
i tried the other way to power on while pressing the home button and it show a some lines with some information.. after that the cLK shows up )) thank you veryy much
but will u please can u advice me what version is good to use for HD2.. but please i wanna try the Jellybean one tyyyyyy

the vieled said:
THANKKK YOU BUDDY really thank you...
al hamdulilah.. u save me lol
thank you very much u expert ;P
the back button did not work with me..
i tried the other way to power on while pressing the home button and it show a some lines with some information.. after that the cLK shows up )) thank you veryy much
Click to expand...
Click to collapse
That doesn't make sense; on cLK, the back button is to access cLK's main and the Home is to access recovery. But it doesn't matter as long as you have got it working. (But if you're confusing CWM, the recovery, with cLK, the bootloader, you're gonna have a bad time)
but will u please can u advice me what version is good to use for HD2.. but please i wanna try the Jellybean one tyyyyyy
Click to expand...
Click to collapse
If you already know what you want, why ask for advice?
Sorry, I can't give you any. But I can tell you that as of this moment, there is no JB 4.2.1 with Wi-Fi. So if you need wifi or you don't have a data plan you need to stick to 4.1.2. Again, I can't recommend any ROM. Glad to be of help.