Related
ok, so I have spent the last 27.38 min looking on the forums for a post that I cannot find so forgive me if I overlooked it.
I am not able to get the MAGLDR screen on my tmousa hd2.
I have read all the tips that say to hold pwr btn on strt up>no lck
I ave tried mny times...am I just dumb? Am I missing a step? plz hlp!
d
deeking2 said:
ok, so I have spent the last 27.38 min looking on the forums for a post that I cannot find so forgive me if I overlooked it.
I am not able to get the MAGLDR screen on my tmousa hd2.
I have read all the tips that say to hold pwr btn on strt up>no lck
I ave tried mny times...am I just dumb? Am I missing a step? plz hlp!
d
Click to expand...
Click to collapse
Which version of MAGLDR did you install?
MAGLDR, when properly installed, will load right after the "stuck together" screen. Holding down the power button just causes MAGLDR to skip a ROM load and wait for you to select an option from the menu.
Snarksneeze said:
Which version of MAGLDR did you install?
MAGLDR, when properly installed, will load right after the "stuck together" screen. Holding down the power button just causes MAGLDR to skip a ROM load and wait for you to select an option from the menu.
Click to expand...
Click to collapse
I think I see the problem. I thought the magldr was part of the tmo os, did not realize I had to installl it.
I have the 1.12 just need to figure out how to install it.
p.s.
have you installed the wp7?
if so, can you get back to wimo6.5?
deeking2 said:
I think I see the problem. I thought the magldr was part of the tmo os, did not realize I had to installl it.
I have the 1.12 just need to figure out how to install it.
p.s.
have you installed the wp7?
if so, can you get back to wimo6.5?
Click to expand...
Click to collapse
No, sorry I don't have W7 installed.
No matter what ROM you install, you can always go back to WinMo, assuming you don't break your phone
If you want to go back to stock, check my signature for a link on how to install ROMs from your SD card. Flashing a stock ROM this way will over write any changes you made, including HSPL.
Hey guys, I've managed to install MAGLDR on my HD2, and I have tried to install CWM.
First I tried v1.3 and everything went OK till i got stuck on the "Go Go Go" screen.
Then I tried v1.2 using my SD card, but i still end up with the same problem.
The thing is I don't have any ROM installed on my HD2 so I can't do anything more !
Would greatly appreciate your help =)
do you use MAGLDR 1.13?
did you try and reinstall your ROM?
Do you use a compatible radio?
Yep I'm on 1.13
I can't do much more, my HD2 won't even boot into the bootloader ! I'm basically stuck on MAGLDR with no ROM and no ability to install back a standard windows ROM
Eelkede said:
Do you use a compatible radio?
Click to expand...
Click to collapse
I followed the steps carefully, so it should be OK but how can I be sure ?
Make sure your battery pins aren't loose. Push them back with your finger and try again.
Sent from my HTC Vision using XDA App
Tried about everything I could hardware-wise without tearing it apart... unfortunately the battery pins don't change anything.
Quite a few members seem to be facing the same problem recently: no access to the bootloader, stuck on MALDR... wonder what's the problem.
The only thing I can do is run WP7 on it, which is not very usable.
i made this: http://forum.xda-developers.com/showthread.php?t=945427
maybe it helps?
Thanks yz.hd but I can't get to the bootloader (volume down + power only brings me to MAGLDR), nor CWM...
It's not possible to only be able to get to MAGLDR and not bootloader I don't think. Just hold down the volume button and then power on while still holding down the power button and see what happens. I had a problem like that where my HD2 would get stuck at "1234" and then stopped and rebooted. The battery pins where the cause.
Sent from my HTC Vision using XDA App
I've tried loads of times, the combo volume down + power really doesn't bring anything up, no matter which way I put it... a complete mystery !
So you've tried to install CWM? Did it work or not? Are you able to go to the USB flasher in Magldr? And install it again, try to see if the AD Recovery works?
Yep, I tried again, the USB flasher works perfectly fine, CWM installs perfectly. But when I go to Ad recovery, it still stays on "Go Go Go!".
Same thing if i install CWM via my SD card
Try formatting SD card (you will lose your data). Try again.
How long does it hang?
If that doesn't work, try to install a DAF rom, and see what happens.
you probably don't have the 'copy to sd' folder in the root of your sd?
Sent from my HTC HD2 using XDA Premium App
Eelkede said:
Try formatting SD card (you will lose your data). Try again.
How long does it hang?
If that doesn't work, try to install a DAF rom, and see what happens.
Click to expand...
Click to collapse
What do you mean by a DAF Rom ? One that is directly bootable from MAGLDR ? I have tried a WP7 rom which works ok. But I still can't install a bootloader to bring it back to WP 6.5 and start the process all over again to install CWM...
@DKxda: is it necessary to have a folder ? I copied the two files directly in the root of my SD.
DAF rom is a rom that doesn't use CWM to run (directly from magldr).
Nope I'm still stuck on Go Go Go if I want to install a DAF Android ROM (no problem with WP7 ROMs though)...
Sorry mate, I'm out of options you could try (well, install CLK, but you need the bootloader for that...)
Hope someone else will help you fix this!
Edit: When does it get stuck at go go go? Immediately at boot or after selecting Boot AD Nand?
You can try to ask it in the Magldr Thread, cause it seems like a Magldr problem to me...
Eelkede said:
Sorry mate, I'm out of options you could try (well, install CLK, but you need the bootloader for that...)
Hope someone else will help you fix this!
Edit: When does it get stuck at go go go? Immediately at boot or after selecting Boot AD Nand?
You can try to ask it in the Magldr Thread, cause it seems like a Magldr problem to me...
Click to expand...
Click to collapse
Well, since yesterday I'm getting a similar issue!
Stuck at go go go or just after on the boot screen which is completely messed I get the top 1/4 screen ok, the rest is bad lines, then the bottom half is dark.
Yesterday I tried installing a CM7 build for my HD2... stuck at Android logo...
So I reflashed CWM Recovery 400Mb partition ok, restored my last backup and rebooted... Now I have this issue all the time!
Tried my many backups, reflashing CWM Recovery a couple of times, factory reset from CWM or MAGLDR...
Nothing will do!
Is my HD2 dead or what????
Well, so here's my first post and this issue has been frustrating me because usually I find my answers online but anyways here's the problem. (Edit: Ok I realized I posted once before, so I guess 2nd my bad aha)
So, my HD2 had TyphooN CyanogenMod 7.2 RC2 v3.8.3 ROM on it cLK. One day my phone was always stuck on the T-mobile Stay together screen, I rebooted it over a good 20 times and still was always stuck. So I decided to just Task 29 it using the HD2 Toolkit (thanks ksubedi) (well I didn't know if that was a good idea or not because I'm not root smart aha, but I did it anyways) What I know when you Task 29 it, it wipes out everything, so I started the whole process again but with the HD2 Tookit. Everything was fine, running smoothing installing everything again, up until when I have to install ClockWorkMod on it. When I want to flash CWM its just always on the "waiting for device" on the command prompt and here iss the picture of my phone (provided)
Then I looked into more and I wasn't able to install the android_winusb.inf file because I have Windows 7 or something and I always get a failed error when trying to install it. (sorry yes I'm clueless aha) So I looked into it more and found the Android SDK thing and downloaded the Google USB driver. Still no luck when trying to install CWM.
But here is my downfall. I was so frustrated I was trying everything, so in the HD2 Toolkit I decided to install HSPL 2.08. My phone already had HSPL if I'm not mistaken if you already have the 3 color things when you press volume down and end call, (but again I'm clueless) So after that I Task 29, but here's the catch it will not do it. Before installing HSPL I could task 29 and it would take 15 seconds to go 100% but now its always 0, and gives me an error.
So that's my problem (probably more cause I screwed it up myself). But any help with be really appreciated!
Did you try manually installing the USB driver from the device manager?
As for the spl, are you sure you installed the 2.08.Hspl version (what does it exactly say on the RGB bootloader?)
Sent from my HD2 using xda premium
Τry to install clk v1.5.It has built in recovery and on the fly re-partition.So you`ll not need pc and usb drivers.
Will try when I come back after school. Finally some replies! I remember downloading HSPL 2.08.0000 or something. Does it exactly have to be 2.08?
vctkiller said:
Will try when I come back after school. Finally some replies! I remember downloading HSPL 2.08.0000 or something. Does it exactly have to be 2.08?
Click to expand...
Click to collapse
It must be 2.08.HSPL or 3.03.HSPL. the one ending in 0000 will block you from flashing unofficial images other than HSPL. So you can just flash back the hspl version again.
clio94 said:
Τry to install clk v1.5.It has built in recovery and on the fly re-partition.So you`ll not need pc and usb drivers.
Click to expand...
Click to collapse
Hey I tried this method, and also the one previously provided but still no luck. With the person saying get HSPL 2.08 I did it, got to the end where clk 1.4 or something (not clk 1.5) but the command line ends at porcharge. Theres no fastboot commands like in other pictures I look like and when I do cLK Install Recovery on the NAND Toolkit, the command prompt keeps waiting on the device.
So now I tried the cLK 1.5 method. I followed kylew1212's guide using the first way with the NAND Toolkit, Task 29, then did the INstall RUU. Everything went smoothly but I'm back to my first problem. It's stuck at the T-mobile stick together screen :/
If you press back button when phone restarts,doesnt get you in clk ? Or if you hold home when phone restarts,doesnt get you in recovery ?
clio94 said:
If you press back button when phone restarts,doesnt get you in clk ? Or if you hold home when phone restarts,doesnt get you in recovery ?
Click to expand...
Click to collapse
Sorry if I'm dumb lol. But the only way to turn on the phone is holding the red end key right, thats the only that it turns on for me. And its stuck at the stick together T-mobile logo. It doesn't go into recovery or anything. How would I be able to restart my phone with being on the T-mobile stick together screen without taking out the batteries and such??
Finally some success I'm on this screen now! Now to find a guide on how to work with cLK 1.5 aha.
Hmm. While restarting and pressing the back arrow and end key, I'm able to get into cLK. No like with home and end key though. And when I do click on Recovery it's trying to boot into Linux or something and no progress shows. "cmdline: no_console_suspend=1 wire.search_count=5 clk=1.5.0.0" Do I just have to wait longer or something. Also in the information on cLK 1.5 its just blank after Radio. Do I need a Radio of some sort?
Don't worry about that just boot into recovery and flash zip.
hengsheng120 said:
Don't worry about that just boot into recovery and flash zip.
Click to expand...
Click to collapse
Damn, I'm pretty clueless. But when I click recovery and get into the next screen nothing happens. How do I flash the zip if I'm unable to access the HD2 sd card with putting in the zip file.
Try to repartition the recovery sector to 10 mb in settings
hengsheng120 said:
Try to repartition the recovery sector to 10 mb in settings
Click to expand...
Click to collapse
Hmm. I tried with the original 5mb recovery sector and 10mb recovery sector still no success. I'm stuck with this screen when I click on recovery. I'm also curious if I should have a RADIO or something, because of the cLK 1.5 homescreen where it gives information its blank (pictures provided)
Are you able to sucessfully install magldr + recovery then?
hengsheng120 said:
Are you able to sucessfully install magldr + recovery then?
Click to expand...
Click to collapse
I've never installed magldr before, but I'll get back to you about it.
Well..problems with MAGLDR aswell. Everything goes smoothly until the USB Flashing and the AD Recovery. When doing USB Flashing the process is fine but when it goes "Reset now..." It never resets, but I'm guessing it flashed already. So when I go to AD Recovery it goes "1EFATAL HIT 1", I've looked up the problems for this, and so I've task 29 it again, installed 2.15.50.14 radio. Tried different cache size and partition size, but always no luck what so ever. So lost in this :/
vctkiller said:
Well..problems with MAGLDR aswell. Everything goes smoothly until the USB Flashing and the AD Recovery. When doing USB Flashing the process is fine but when it goes "Reset now..." It never resets, but I'm guessing it flashed already. So when I go to AD Recovery it goes "1EFATAL HIT 1", I've looked up the problems for this, and so I've task 29 it again, installed 2.15.50.14 radio. Tried different cache size and partition size, but always no luck what so ever. So lost in this :/
Click to expand...
Click to collapse
Try the fatality fix here: http://forum.xda-developers.com/showthread.php?t=1633243
I really appreciate that your helping me, but I'm almost there! Now encountered to another problem. Now when I do USB Flashing it finally resets itself. But when I click the AD Recovery its stuck at "GO GO GO!" I'm using the NAND Toolkit, and I tried two different partition and cache size 200/8 and 250/8. I have no idea how much I should bump these up too, and the ROM I'm trying to install is the NexusHD2, if that helps.
EDIT: FINALLY INTO CWM!!!! Hmm. I was looking around and there was this guy said to move the 3 pin connecters in the battery or something. So I was like what the heck and just did it, and now im in CWM. Thanks man. I really appreciate for you to always reply back when I needed help. Wouldn't have gotten through without you!
vctkiller said:
EDIT: FINALLY INTO CWM!!!! Hmm. I was looking around and there was this guy said to move the 3 pin connecters in the battery or something. So I was like what the heck and just did it, and now im in CWM. Thanks man. I really appreciate for you to always reply back when I needed help. Wouldn't have gotten through without you!
Click to expand...
Click to collapse
can u explain in detail how u make it working plz
faizul_emizal said:
can u explain in detail how u make it working plz
Click to expand...
Click to collapse
What problem are you having? I'm not expert like hengsheng120 but I was able to find a solution to a problem that I thought never was going to be fixed.
I have installed HSPL 2.08 and wiped (task29) all data. After that, I have installed (repartitioned) cLK, I clicked flash then it went to 100%, but after that when my phone reboots, it just gets stuck on the white HTC screen. I have after that flashed cLK 1.5, and the same thing happens. When I check the PDA flasher which is given with the HTC HD2 Toolkit, it says that there is no Image on my phone, but I have flashed the 1.5 cLK image plenty of times. What could be the problem?
Superdod said:
I have installed HSPL 2.08 and wiped (task29) all data. After that, I have installed (repartitioned) cLK, I clicked flash then it went to 100%, but after that when my phone reboots, it just gets stuck on the white HTC screen. I have after that flashed cLK 1.5, and the same thing happens. When I check the PDA flasher which is given with the HTC HD2 Toolkit, it says that there is no Image on my phone, but I have flashed the 1.5 cLK image plenty of times. What could be the problem?
Click to expand...
Click to collapse
Hold home button while booting phone it should bring you to recovery
Hold the back button while booting the phone, it should bring you to clk screen.
shanman-2 said:
Hold home button while booting phone it should bring you to recovery
Hold the back button while booting the phone, it should bring you to clk screen.
Click to expand...
Click to collapse
Thanks for the tip, but nothing happens while I am holding the buttons.
Well if things are not working for you using the toolkit you could try following the instructions in post 3 of this link to install clk v1.5 from sd-card.
shanman-2 said:
Well if things are not working for you using the toolkit you could try following the instructions in post 3 of this link to install clk v1.5 from sd-card.
Click to expand...
Click to collapse
Thanks, though I think I'll stay on windows for today x)
Try flash a different ROM and see if it works, if an alternative ROM works it could be a problem with the previous ROM or the settings you used within the phone e.g. might of missed a step or done something like partition sizes or something of that nature.
Superdod said:
I have installed HSPL 2.08 and wiped (task29) all data. After that, I have installed (repartitioned) cLK, I clicked flash then it went to 100%, but after that when my phone reboots, it just gets stuck on the white HTC screen. I have after that flashed cLK 1.5, and the same thing happens. When I check the PDA flasher which is given with the HTC HD2 Toolkit, it says that there is no Image on my phone, but I have flashed the 1.5 cLK image plenty of times. What could be the problem?
Click to expand...
Click to collapse
I'm not exactly sure what's going wrong, but something isn't installing correctly. Task 29 wipes your phone so you have nothing (aka the white screen you're talking about) try rebooting your computer and then go and install clk again. If everything works correctly it should work.
shanman-2 said:
Hold home button while booting phone it should bring you to recovery
Hold the back button while booting the phone, it should bring you to clk screen.
Click to expand...
Click to collapse
This is true, but it won't work for him because he has no clk or recovery installed to boot into.
shanman-2 said:
Well if things are not working for you using the toolkit you could try following the instructions in post 3 of this link to install clk v1.5 from sd-card.
Click to expand...
Click to collapse
+1
parker09 said:
Try flash a different ROM and see if it works, if an alternative ROM works it could be a problem with the previous ROM or the settings you used within the phone e.g. might of missed a step or done something like partition sizes or something of that nature.
Click to expand...
Click to collapse
No. To install a ROM, it requires a boot loader and recovery to be installed. Because he doesn't have either installed yet, this is not applicable.
Sent from my Galaxy Nexus using xda premium
Ah yeah, my mistake, was thinking green HTC logo
Hello,
I have this problem with my htc hd2:
after installing CLK and rebooting my hd2 a prompt screen appears:
codesmith' s LK (CLK) v1.4.0.1
[2340] ptn 0 name and so on..
and so on..
and so on..
after searching the forum i found something: you have only installed CLK but not CLK recovery!
So i installed CLK recovery via HD2 toolkit. Everything went good: succes partion ' recovery' updated
press key for reboot.
So i press a key, the phone reboots and i get the promp screen again! in stead of magdlr
?? whats wrong?
please help!
i did a wipe, hspl, magdlr with says no boot sourch, so i installd magdlr and know i have this problem
sorry for batt engelish
bart111 said:
Hello,
I have this problem with my htc hd2:
after installing CLK and rebooting my hd2 a prompt screen appears:
codesmith' s LK (CLK) v1.4.0.1
[2340] ptn 0 name and so on..
and so on..
and so on..
after searching the forum i found something: you have only installed CLK but not CLK recovery!
So i installed CLK recovery via HD2 toolkit. Everything went good: succes partion ' recovery' updated
press key for reboot.
So i press a key, the phone reboots and i get the promp screen again! in stead of magdlr
?? whats wrong?
please help!
i did a wipe, hspl, magdlr with says no boot sourch, so i installd magdlr and know i have this problem
sorry for batt engelish
Click to expand...
Click to collapse
eh?
You installed cLK with recovery but then got disappointed that you didn't see MAGLDR's menu so you installed magldr and now you have this problem, the prompt screen of cLK, again ?
I am not sure I am following.
If you mean you didn't see 'the recovery' of cLK after installing it, Reboot your phone and hold the "Home" button to go into cLK's recovery.
EDIT:
I think you don't know what you're doing (no offence). So just follow this guide (thank the author) until you get to the recovery, then just flash your ROM.
Make sure to set the recovery accordingly, if you want cLK instead, search the forums or ask me and I can give you a guide for it.
sorry i made i mistake in telling the problem:
i did a wipe, hspl, magdlr with says no boot sourch, so i installd magdlr and know i have this problem
need to be::
i did a wipe, hspl, magdlr with says no boot sourch, so i install >>>CLK<<< and know i have this problem.
i dont know what iam doing? yes and no, i have done 8 hd2 succesfully( didn't have problems). but the 9e hd2 give me this problem.
so i have read the guides on this forum.
this htc was also ' bricked ' fatal hit error.
so i did a wipe, then hspl, then magdlr, the, CLK, but the problem is that after the clk a promp screen appears...
so i read the forum's and saw that somebodey said: that promp screen is CLK. what you have to do is install CLK recovery.
so i instal CLK recovery, but the promp screen appears again...
i hope you get it know..
you are either not understanding the difference between magldr and cLK or you are confusing cLK with CWM
you flash EITHER magldr OR cLK, not both, they both do the same thing, if you flash clk after magldr, it will replace magldr, if you flash magldr after cLK, it will replace cLK, , you make your own decision, you decide which you want to use, and use it.
They BOTH use CWM recovery.
SO, when you flash magldr and it says no boot source, that's because you haven't installed CWM (not clk) yet, so there is nothing to boot, , , hence, , no boot source.
flash magldr
run the nand toolkit
choose partition size on the left,
click 'magldr repartition'
when its finished, CWM is now installed, and you can access it by starting into magldr, and choose option 8 - AD recovery.
CWM will now start, and you can choose 'install zip from sd card', , select the rom.zip you already put on the card before you started, and hey presto, , done.
now stop being a pathetic spoon fed noob, and go do your own reading.
samsamuel said:
you are either not understanding the difference between magldr and cLK or you are confusing cLK with CWM
you flash EITHER magldr OR cLK, not both, they both do the same thing, if you flash clk after magldr, it will replace magldr, if you flash magldr after cLK, it will replace cLK, , you make your own decision, you decide which you want to use, and use it.
They BOTH use CWM recovery.
SO, when you flash magldr and it says no boot source, that's because you haven't installed CWM (not clk) yet, so there is nothing to boot, , , hence, , no boot source.
flash magldr
run the nand toolkit
choose partition size on the left,
click 'magldr repartition'
when its finished, CWM is now installed, and you can access it by starting into magldr, and choose option 8 - AD recovery.
CWM will now start, and you can choose 'install zip from sd card', , select the rom.zip you already put on the card before you started, and hey presto, , done.
now stop being a pathetic spoon fed noob, and go do your own reading.
Click to expand...
Click to collapse
my plan was to thank you, but i changed my mind.
a pathetic spoon fed noob? friendliness isn't your strongest side i guess..
god thank I'am not like you!
So **** your self and have a nice day!:laugh:
bart111 said:
my plan was to thank you, but i changed my mind.
a pathetic spoon fed noob? friendliness isn't your strongest side i guess..
god thank I'am not like you!
So **** your self and have a nice day!:laugh:
Click to expand...
Click to collapse
I think your sources of help have just vastly diminished. I don't even have this phone and understand your need to read more....
Sent from the future on my Star Trek communicator.
Sent from my LT30p using XDA premium.
bart111 said:
my plan was to thank you, but i changed my mind.
a pathetic spoon fed noob? friendliness isn't your strongest side i guess..
god thank I'am not like you!
So **** your self and have a nice day!:laugh:
Click to expand...
Click to collapse
Hehe, yeah it was a bit harsh, but hey, so long as the advice works, who cares? Grumpy good advice is infiitely better than none,,,, did it work? Yes? Did you learn somwthing? Then it was worth a little hurt feelings.
bart111 said:
my plan was to thank you, but i changed my mind.
a pathetic spoon fed noob? friendliness isn't your strongest side i guess..
god thank I'am not like you!
So **** your self and have a nice day!:laugh:
Click to expand...
Click to collapse
Yeah, I personally feel that the term 'pathetic spoon-fed noob' was about right. Everything you wanted could have been found through searching, and I refuse to believe that you've flashed 8 HD2s without having a CLUE what the difference between cLK and MAGLDR is. I assume when you say 'flashed' you mean 'bricked' because that's all I can see happening if you try to do anything to any phone.
gregbradley said:
I think your sources of help have just vastly diminished. I don't even have this phone and understand your need to read more....
Sent from the future on my Star Trek communicator.
Sent from my LT30p using XDA premium.
Click to expand...
Click to collapse
yeah i dont say that is not true, i need to read more, but thats is not a reason to call some bode a pathetic spoon fed noob.
but thats just what I think.
thx anyway, :good: