Database Users

[Q] !!HELP!! STUCK ON ANDROID LOGO AFTER gogogo! on magldr

hey guys ive seen a few thread similar to mine but they seem to just different enough, that i cant use the same solution posted.
I used Magldr to run android rom on my hd2 and after the go go go! screen in went to the android logo... then turns off ... then loads again then turns off ... so annoying
I did the whole process over again from scratch but the same thing happened.
Im sure i am missing something but i cant seem to figure out what it is.
I did the following steps
1) falsh HSPL 2.08
2) flash Task 29 with 2.15 radio
3) Paste "initrd.gz" and "zImage" to root sd
4) after reboot i went to "BOOT AD SD"
5) booted rom from CWM
6) everything went good ... got past go go go! then is just stopped at the android logo

laulakh said:
hey guys ive seen a few thread similar to mine but they seem to just different enough, that i cant use the same solution posted.
I used Magldr to run android rom on my hd2 and after the go go go! screen in went to the android logo... but then it just stopped and didn't do anything
I did the whole process over again from scratch but the same thing happened.
Im sure i am missing something but i cant seem to figure out what it is.
I did the following steps
1) falsh HSPL 2.08
2) flash Task 29 with 2.15 radio
3) Paste "initrd.gz" and "zImage" to root sd
4) run Daf.exe
5) after reboot i went to "BOOT AD SD"
6) everything went good ... got past go go go! then is just stopped at the android logo
Click to expand...
Click to collapse
Is your AD SD Boot Dir set to the root ( >.< in the menu) of your SD Card? If not, try reflashing MAGLDR...

Maybe you want to tell us what build you used?
Sent from my HD2 Glacier using XDA App

New problem
thank for the quick post
sorry i should mentioned it I'm using the JDMS Ultimate on HTC HD2 rom
http://forum.xda-developers.com/showthread.php?t=782301
however i figured my earlier problem now im running into something else
i didn't use the "initrd.gz" and "zImage" from CWM
NEW problem
After rebooting with CWM android boots up then turns off and then it boots up from nand and turns off again ... this will keep on looping until i take battery out
I re flashed Magldr but it did the same thing ... im going to reflash HSPL then try again ... but i followed all the direction from the following thread and dont see where i went wrong
http://forum.xda-developers.com/showthread.php?t=898913

GOT IT!!
thanks ... kinda to hose who helped...
I used CWM 1.0 instead and everything worked fine...i also used the the Jaws-MIUI rom
thanks RaiderX303
Ill probably kill this thread soon if oneone posts one but but the questions I had were answered by looking around I was just too lazy at first

hi need help
can not install the Clockwork Mod Recovery On The HD2 when i restart on the MAGLDR only on 2.Boot AD NAND what do need help!!!!!!!!!!!

cant reboot form BOOT AD SD only on Boot AD NAND need help?????

on the AD SD Boot Dir set to the root ( >.< in the menu) which one i select it have <,> AAlic*1,dcim,mydoc*1,WMDRM,TRANSF*1,XDA_UC,GAMELOFT,MULTIM*1.APP,PROGRA*1??????

hope this not way off i am still totaly new at this but , just went trhough something similar with a bad nand install and kept rebooting to quietly brillant, not sure where i found my answer now but hold down the power button after you boot to get to default main magdlr screen where you will be able to make the changes you need then maybe reflash your rom

If it keeps looping over HTC white screen and the 1234 GOGOGO MAGLDR screen then take out your battery and push the battery pins back. They could be loose.

This also happened to me, my i only option and solution was: press hard-reset button on backside so it wont be stuck on the andriod logo and go back to the store and be really nice to the salesman so he would send it back to htc.

I'm currently having issues resulting in this same issue. I've tried mutiple different Roms aswell as using some SD roms in the hopes that I would fine a build suitable for my phone but I always end up getting bad results.
My previous NAND Rom worked fine for all of about 5 hours before I started getting freezes, restarting and constant boot loops along with massive battery drains.
Currently running the below ROM and so far, it's been the most reliable (going almost 12hrs without a hitch) but this morning I found it sat on the little blue android man screen. Had to do a battery pull and switched the phone back on, only to end up on the same screen again. I've left the phone for a fair period of time between each battery pull (probably around 30mins) but still get the same thing.
http://forum.xda-developers.com/showthread.php?t=967353
Any idea's on how to fix this? Ideally I'd like to keep the same build I have now as its a really nice build... I just can't seem to get anything running properly.

Seem to have got it working again. Did a battery pull but left the battery out for a good 20mins before putting it in. Booted up first time and it seems to be working fine now.

hd2 stuck magldr 1.13 help!

Was trying to install wp7 on my hd2, but now im stucked on magldr version 1.13. Forgot that the volume buttons doesnt work and i cant get the phone out of there. Try to load original rom or even task 29 but nothing becuase the pc doesnt recognize it. When the phone its booting it says something like cant boot from sd android kernel fail and then the menu and i can select only the first 1 boot wph.
Is there a way to get the phone out of there, or my only hope its to repair the volume button.
thanks

If you haven't been able to flash anything then as long as you just reboot your phone you'll just go back to whatever ROM you had previously

I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?

i remove the battery but when the hd2 start again it boots instantly to magldr, i need another way to flash it different to the three color screen (i cant get there becuase the volume down button its broke).

i have a problem like that

If your volume keys don't work, then there is seriously, no other way. You can't get into bootloader mode without the volume keys, and the you can't flash a different rom without the volume keys, so yeah, your device is pretty much bricked....

But IF the vol. down key works, I assume that it is something with MAGLDR or HSPL, or possibly an error in RAM. Are there anything that can be flashed via magldr that checks the state of underlying HSPL?

any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed

Maybe I'm tired or too old... but I don't understand your questions
You can imagine the different "softs" as layers:
1st: HSPL (or SPL) - it's the one you enter by pressing vol-down while booting.
this one give you the ability to flah a WM ROM (original or custom), a radio or MAGLDR
So if vol-down if dead... your phone also
nb: the first splash screen is at this level, so it will be still here after flash of MAGDR, CWM, NAND, WM7...
2nd: MAGLDR - it's the one you go in by pressing "end call" while booting.
It gives the ability to flash a NAND or WM7 via DFT
So if "end call" is dead... you're not But it's anoying I think...
3rd: CWM - it's the one you go in by selecting "AD recovery" in MAGLDR
It gives you the ability to flash a "CWM NAND" or an update... It also gives the ability to backup/restore a NAND.
So please clarify your question if you need help. More important do not post different problem by saying "same here". It's just confusing. Even if you can't boot your NAND it's not always the same problem
Let's try again dudes

osugsxr said:
any fix to this??? same issue following the steps and volume buttons dont work. I can select the boot wph ....wph not installed
Click to expand...
Click to collapse
HTC after sales... or few bucks

That is what I'm thinking, will try warranty to see if that works if not not ill see what they charge. For now back to the nexus s.
truc007 said:
HTC after sales... or few bucks
Click to expand...
Click to collapse
Sent from my Nexus S using XDA App

This is the answer to your problem if it does work find someone that is not a noob and have them fix your phone its really not that hard

Ok guys please help me I don't wanna start new thread
I installed on my hd2:
-HSPL 2.08
-Radio 2.15.50.14
-Magldr 1.13
-CMR
First of all I noticed that I dont have to hold the power button to get into the magldr menu.
I couldn't get into Boot As SD so I wanted to flash custom rom from bootloader. Unfortunately I can't do that. Even tried HR. Is there any solution to flash stock ROM
Any help would be greatly appreciated

Stuck for me too
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.

hi, have u tryed with the small button under the volume down button? it works as the volume down button...
If u can go in bootloader (if ur volume down works) could be ur nand is corrupted (as mine ) so bye bye hd2... i m waiting for the htc sensation

DAF doesnt' work
ChitownWingMan said:
I just flashed the latest hspl3, radio code and MAGLDR 1.13.
When I try to boot MCCM 4.5 from SD it hangs on the main Android Home Screen. When I try to boot WPH MAGLDR says that WPH is not installed.
I am still running Windows Mobile 6.5.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I figured out the Android problem (I needed a different rootfs).
I have magldr 1.13 working!!!!
However, when I try to run DAF I get the same:
"An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)"
error that I have seen all over XDA-Dev.
However, none of the fixes I have seen on here have worked. I am running Windows 7 Professional.
I have tried:
Disabling Use USB in the Window Mobile Device Center
I have tried ANDR_INSTALL
I have rebooted
I have tried deleting all of the unattached USB device in the device manager.
I have tried using LeoAdvancedRUU
I have tried starting DAF first and then connecting the usb cable
I have tried connecting the USB cable first and then the starting DAF.
Help please!!! I was up until 8:30 AM trying to get this to work (I started at about 10:00 PM).

i also put the hd2 into the freezer for 10 minutes to solve heat problem and it doesn't start bootloaderi...
the nand corrupted..it start magdle but don't start android or cwm..there is nothing to do

tser04 said:
I have the same problem, after having upgraded to 1.13. Whenever i try to install a NAND version of Android, i am stuck with the splashscreen of the build i am trying to boot into. Bear in mind that every ROM i flash is flashed without any problems. So I guess it is not the NAND memory thats broken or faulty. The only build i am capable of running, is DFT's WP7 stock build. This loads perfectly, but due to the battery drain i would VERY much like to get rid of it and use my beloved MDJs Gingerbread/CM7 2.6 build.
To avoid any trouble i thought of just flashing a Task29, and a stock WM65 ROM to 'reset' to stock, that is, installing a custom ROM from SD card, so SPL is restored to factory version. However, i am not able to enter bootloader mode on my HD2. It can only boot into Magldr and succ. WP7. It doesn't help to press vol down, and it is not broken as I can use it in WP7. It seems as though HSPL is skipped and the phone is boot directly into magldr. This should NOT happen.
Anyways, this is very much close to a bricked device for me, so i am very sad these days. Does ANYONE know a trick that would enable me to replace magldr 1.13 with the working 1.12 without the tri-colour bootscreen of spl?
Click to expand...
Click to collapse
I have the same exact problem !! WP7 is the only OS that works and I want android
also the volume down key works...should I try to reflash HSPL ?? will that work ?? since HSPL 2.08 is already installed !??

Happen error
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (291)

[Q] Hd2 stuck on magdlr

Hello, I am in need of some help. My htc hd2 got stuck on the MAGDLR loader and everytime I try to load android it goes through all steps, tells me it completes, Phone restarts, and then goes back to the MAGDLR loader. If somebody could get me out that would be great

[email protected] said:
Hello, I am in need of some help. My htc hd2 got stuck on the MAGDLR loader and everytime I try to load android it goes through all steps, tells me it completes, Phone restarts, and then goes back to the MAGDLR loader. If somebody could get me out that would be great
Click to expand...
Click to collapse
It would help someone help you if you gave more info on the problem... like what exactly are you trying to load? Android from SD or nand? What build? What steps does it go through and complete?

first take the SD card out and back up your data i.e. sounds, photos, etc
1. go into bootloader (the screen with the red background, you can do this by holding the power on button down and the volume down button both together at the same time)
2. install task29 you can do this from the bootloader screen
3. reinstall magldr
4. reinstall a nand ROM

How to finish with that stcuking thing !
Hi,
I hope the following may help you :
The most important thing to notice is to flash a Radio ROM that supports 576RAM (don't ask me... :-D ).
The Good news are that the HTC Leo Radio 2.15.50.14 will.
So you can flash that radio right after running HSPL3.
MAGDL1.13 should work for as it did for me.
Good luck.

The post above mine seems to be the best route good luck.

[Q] Aaaah im so in a mess please help.

Ok im now in a proper mess.
Ok ive been battling with trying to get Android on my HD2 i have manged no prob with the MAGLDR in the past but wanted to change to the CLK version.
I tried all the tried the tips etc and have downloaded the HD2 Android Nand Toolkit but i just couldnt get it working. Once i thought i did I get CLK wokring I installed the ZIP file but it just got stuck on the HTC splash screen. The only way i can it to actually boot is to put the stock Winmo ROM back on. So at the moment I have the stock ROM just with SPL. As soon as i run the Task29 option in the toolkit it then fails to load. Could somebody please advise me on what to do.

TommyHD2 said:
Ok im now in a proper mess.
Ok ive been battling with trying to get Android on my HD2 i have manged no prob with the MAGLDR in the past but wanted to change to the CLK version.
I tried all the tried the tips etc and have downloaded the HD2 Android Nand Toolkit but i just couldnt get it working. Once i thought i did I get CLK wokring I installed the ZIP file but it just got stuck on the HTC splash screen. The only way i can it to actually boot is to put the stock Winmo ROM back on. So at the moment I have the stock ROM just with SPL. As soon as i run the Task29 option in the toolkit it then fails to load. Could somebody please advise me on what to do.
Click to expand...
Click to collapse
You need Hardspl from Cotulla. Search through the threads you'll find it. but if you had magldr installed you should have all the the necesary elements. using the tool kit you have to hold the volume down than power on. wait for your phone to say usb. Than proceed to task 29. Than when the screen shuts off hold the volume down again before the screen comes on. Pick your partition size, Than hit the partiton button wait for it to do its thing than hold the back key and some text should come on your phone ending with something like fastboot commands suspend. Flash the recovery. than when it go off again hold home until you get in to recovery. Hope that helps.

Cheers for the help. Ive got as far as the revovery install i had a load of text on the screen the last line of wich is 2690 --Portchange-- and the pc is sitting on waiting for device.

also this is all it does when i turn the phone on now

TommyHD2 said:
also this is all it does when i turn the phone on now
Click to expand...
Click to collapse
Are you holding the back button until the text comes on?

Have you successful installed hspl? Successfully installed magldr and successfully installed cwm?
Is the Rom your installing a magldr version? Did you get it from the Android nand thread?
Is your SD card working is it formatted to fat32?
Are you installing the Rom from SD?
Is it a .zip file?
Edit/ oh clk..... lol never used it
Sent from my HTC HD2 using XDA Premium App

If i hold the power with the back button or the power/hangup button the text goes up to --portchange-- line if i hold the home button it shoes the line
GET STALL_DESCRIPTOR 128 6 1536 0 10
Pc is still saying waiting for device.
I have magldr but cant seem to boot to it and i have SPL-2.08.HSPL CotullaHSPL
I also tried to install magldr again and it gives a USB init failed Info \\rspl\rspl..cpp (736) but the phone is showing USB with the red\green\blue\white screen.

whynot66 said:
Have you successful installed hspl? Successfully installed magldr and successfully installed cwm?
Is the Rom your installing a magldr version? Did you get it from the Android nand thread?
Is your SD card working is it formatted to fat32?
Are you installing the Rom from SD?
Is it a .zip file?
Edit/ oh clk..... lol never used it
Sent from my HTC HD2 using XDA Premium App
Click to expand...
Click to collapse
haha..
TommyHD2 said:
Ok im now in a proper mess.
Ok ive been battling with trying to get Android on my HD2 i have manged no prob with the MAGLDR in the past but wanted to change to the CLK version.
I tried all the tried the tips etc and have downloaded the HD2 Android Nand Toolkit but i just couldnt get it working. Once i thought i did I get CLK wokring I installed the ZIP file but it just got stuck on the HTC splash screen. The only way i can it to actually boot is to put the stock Winmo ROM back on. So at the moment I have the stock ROM just with SPL. As soon as i run the Task29 option in the toolkit it then fails to load. Could somebody please advise me on what to do.
Click to expand...
Click to collapse
alls ye really need mate if you have flashed spl 2.08 or above is get task29 plug phone via USB turn phone off turn back on while holding vol down key untill tri colours appear then it says USB at bottem, run task29 from computer phone will do the rest, get magldr go back to tri colour with USB at bottem run ROMUpdateUtility install it then try the rom in my signature first typhoon and download the recovery of his page and install that specific one then flash your rom, its got installation on typhoon thread....

Cheers for the help. Ive re-installed MAGLDR and have ClockworkMOD recovery v3.0.0.5 working and I have a rom that i have downloaded and am currently downloading one of yours Laney, before i do anything clockwork MOD is showing "Failed to find Cache partition to mount at \cache.

Dont you have an sd card inserted?

[Q] Not getting Bootloader

Hello sir.... I have HTC HD2 with windows mango in it.... I have a sever problem with it some times it automatically reebot and says "1e fatal hit 1" after several restarts the phone on properly.... No today the mobile is booting with out problem but when its loads the logo of windows phone it reebot again I need to downgrade to 6.5 but the volumes keys are not working i dont know y

that doesnt sound good, can you get the magldr boot menu to load?, hold down call end from when you turn it on
Do the volume buttons work there?
can you get to the tri coloured bootloader at all?
sounds kinda serious, if possible id want to SD flash a stock WM6 ROM, SD flash because it would overwrite the SPL, which may be buggered, course 1E can be a memory address which is deffinitely not good :/

Raviteja894 said:
Hello sir.... I have HTC HD2 with windows mango in it.... I have a sever problem with it some times it automatically reebot and says "1e fatal hit 1" after several restarts the phone on properly.... No today the mobile is booting with out problem but when its loads the logo of windows phone it reebot again I need to downgrade to 6.5 but the volumes keys are not working i dont know y
Click to expand...
Click to collapse
with UltraFruit ROM restarts is because problem with multitouch driver..
also try remove battery and wait one minute, put back battery and try boot now...
if you want reinstall WP7, no need to flash WM6.5
simply use NAND Toolkit
http://forum.xda-developers.com/showthread.php?t=1090783
install, run...
1. use Task29 and flash it (this will be formatted NAND memory)
2. use MAGLDR and flash it
3. flash WP7....