Database Users

Stuck on "Go Go Go"

Hey guys, I've managed to install MAGLDR on my HD2, and I have tried to install CWM.
First I tried v1.3 and everything went OK till i got stuck on the "Go Go Go" screen.
Then I tried v1.2 using my SD card, but i still end up with the same problem.
The thing is I don't have any ROM installed on my HD2 so I can't do anything more !
Would greatly appreciate your help =)

do you use MAGLDR 1.13?
did you try and reinstall your ROM?

Do you use a compatible radio?

Yep I'm on 1.13
I can't do much more, my HD2 won't even boot into the bootloader ! I'm basically stuck on MAGLDR with no ROM and no ability to install back a standard windows ROM

Eelkede said:
Do you use a compatible radio?
Click to expand...
Click to collapse
I followed the steps carefully, so it should be OK but how can I be sure ?

Make sure your battery pins aren't loose. Push them back with your finger and try again.
Sent from my HTC Vision using XDA App

Tried about everything I could hardware-wise without tearing it apart... unfortunately the battery pins don't change anything.
Quite a few members seem to be facing the same problem recently: no access to the bootloader, stuck on MALDR... wonder what's the problem.
The only thing I can do is run WP7 on it, which is not very usable.

i made this: http://forum.xda-developers.com/showthread.php?t=945427
maybe it helps?

Thanks yz.hd but I can't get to the bootloader (volume down + power only brings me to MAGLDR), nor CWM...

It's not possible to only be able to get to MAGLDR and not bootloader I don't think. Just hold down the volume button and then power on while still holding down the power button and see what happens. I had a problem like that where my HD2 would get stuck at "1234" and then stopped and rebooted. The battery pins where the cause.
Sent from my HTC Vision using XDA App

I've tried loads of times, the combo volume down + power really doesn't bring anything up, no matter which way I put it... a complete mystery !

So you've tried to install CWM? Did it work or not? Are you able to go to the USB flasher in Magldr? And install it again, try to see if the AD Recovery works?

Yep, I tried again, the USB flasher works perfectly fine, CWM installs perfectly. But when I go to Ad recovery, it still stays on "Go Go Go!".
Same thing if i install CWM via my SD card

Try formatting SD card (you will lose your data). Try again.
How long does it hang?
If that doesn't work, try to install a DAF rom, and see what happens.

you probably don't have the 'copy to sd' folder in the root of your sd?
Sent from my HTC HD2 using XDA Premium App

Eelkede said:
Try formatting SD card (you will lose your data). Try again.
How long does it hang?
If that doesn't work, try to install a DAF rom, and see what happens.
Click to expand...
Click to collapse
What do you mean by a DAF Rom ? One that is directly bootable from MAGLDR ? I have tried a WP7 rom which works ok. But I still can't install a bootloader to bring it back to WP 6.5 and start the process all over again to install CWM...
@DKxda: is it necessary to have a folder ? I copied the two files directly in the root of my SD.

DAF rom is a rom that doesn't use CWM to run (directly from magldr).

Nope I'm still stuck on Go Go Go if I want to install a DAF Android ROM (no problem with WP7 ROMs though)...

Sorry mate, I'm out of options you could try (well, install CLK, but you need the bootloader for that...)
Hope someone else will help you fix this!
Edit: When does it get stuck at go go go? Immediately at boot or after selecting Boot AD Nand?
You can try to ask it in the Magldr Thread, cause it seems like a Magldr problem to me...

Eelkede said:
Sorry mate, I'm out of options you could try (well, install CLK, but you need the bootloader for that...)
Hope someone else will help you fix this!
Edit: When does it get stuck at go go go? Immediately at boot or after selecting Boot AD Nand?
You can try to ask it in the Magldr Thread, cause it seems like a Magldr problem to me...
Click to expand...
Click to collapse
Well, since yesterday I'm getting a similar issue!
Stuck at go go go or just after on the boot screen which is completely messed I get the top 1/4 screen ok, the rest is bad lines, then the bottom half is dark.
Yesterday I tried installing a CM7 build for my HD2... stuck at Android logo...
So I reflashed CWM Recovery 400Mb partition ok, restored my last backup and rebooted... Now I have this issue all the time!
Tried my many backups, reflashing CWM Recovery a couple of times, factory reset from CWM or MAGLDR...
Nothing will do!
Is my HD2 dead or what????

[Q] Android stopped booting / HTC HD2 - problem

Hi guys,
How to run MAGLDR without booting Android?
I have problem and I can't solved it by myself. I have installed Android on my HTC HD2. I did it by MAGLDR. Now I'd like to run only Magldr without booting Android. How can I do this? Is it any hotkeys to run only MAGLDR?
I'd like to do that, because my android for some reasons stoped booting. I only can see HTC text on white background. If I put off SD Card and start booting I can see HTC text on white background and then Quietly brilliant text.
P.S. I have NAND ver. of Android which is booted by MAGLDR.
Please Help,
Greetings
Tomasz Pietrzak

Hold power key down.
Hi there,
Very simple. Just hold down the power key after your device switches on and wait. MAGLDR should boot in a sec. or 5
Pozdrowienia,
Janek.

Boot to MAGLDR (all the time)
I called myself flashing a new rom. I was running CMYLXGO 1.1.18n on my HD2. I wanted to change to Hyperdroid. After the wipe, partition, bla bla bla stuff. When I restarted the device, It failed. I decided to return back to the CMY rom to make sure I did not ruin my phone. Did the wipe, and all that stuff again.
Long story short, now if I pull the battery, turn it on, I boot straight to MAGLDR (not holding the button). I have to select option 3 (boot to ad nand). Then everything runs fine. What did I do wrong?
Running
SPL 2.08
MAG 1.3
Kernel 2.6.32.15raf
I still would like to switch to Hyperdroid -
Thanks in advance.

jwgizmo said:
I called myself flashing a new rom. I was running CMYLXGO 1.1.18n on my HD2. I wanted to change to Hyperdroid. After the wipe, partition, bla bla bla stuff. When I restarted the device, It failed. I decided to return back to the CMY rom to make sure I did not ruin my phone. Did the wipe, and all that stuff again.
Long story short, now if I pull the battery, turn it on, I boot straight to MAGLDR (not holding the button). I have to select option 3 (boot to ad nand). Then everything runs fine. What did I do wrong?
Running
SPL 2.08
MAG 1.3
Kernel 2.6.32.15raf
I still would like to switch to Hyperdroid -
Thanks in advance.
Click to expand...
Click to collapse
well if u want to boot directly from nand do the following things
turn on the phone
when u will see the magldr menu go to services ( # 10 if i still remmember )
u will see 5 choices ...t=choose the first : boot settings
u will see 3 choices ...choose the first boot sources and choose android from nand
go back to the last screen and choose always display menu ...it will ask u yes ( call button) or no (end call button) ...press end call end go back to reboot ...now u will boot directly to ur rom
for the part about changing to hyperdroid ...u ned to know the exact recovery partition to use ...for hyperdroid 150mb and for CMYLXGO 1.1.18 400mb ( i think so cuz it's a sense rom) ...so flash 150mb recovery partition and install hyperdroid ...
hope that helped u

Big thanks
Yes you fixed it. Thank you....
I'll work on the Hyperdroid later.

jwgizmo said:
Yes you fixed it. Thank you....
I'll work on the Hyperdroid later.
Click to expand...
Click to collapse
dont forger To hit The thanks Burton

now all u need to do is install the newest clwm and click on fix permissions,then GET RID of hyperdroid and get ultimate droid 3.3,the best rom ive EVER had on my hd2,tried over 100 roms over the last 20 months and ive stuck with this 1 for 3 months instead of 3 days lol,it has EVERYTHING built,all the **** removed,WORLD CLASS,only thing that could beat it is a htc thunderbolt rom or a htc sensation rom on a hd2,that would b ****in sick and i'd wet myself lol
Sent from my HTC HD2 using XDA App

hi, i have HTC HD2 with NAND android with magldr,and yesterday the phone show me sime error,I don't remeber what was,i have onle "Force Stop" botton,but the error shows again and again,and i turn the restart but. and the phone die ,Now i can't turn it on,is there a way to activate magldr,the phone don;t recognise the USB cable ,the battery is full...

a cant go to bootloader the volume key not work!What to do,please

hey anybody here??????????????????

Open it fix the volume key hardware prob, will be a help for u in future too. No other solutn i have got
Sent from my HTC HD2 using xda premium

[Q]How to revert to stock windows mobile from nothing?

I have searched and could not find a thread with the exact problem I have, I hope I did not miss it if there is one.
I tried to install android and followed this guide, http://forum.xda-developers.com/showthread.php?t=609477 and I was in android working fine. Then I tried to install Clockwork Mod through active sync and things went completely downhill from there. Long story short I tried to flash it back to where i was and now I cannot boot into windows since it's gone and when i try to boot into android it says Fatal HIT 1 or something like that. Is there a way to put a rom onto my sdcard and flash it without having to use active sync or anything like that?
The menu I can access is the MAGLDR menu so I can do USB Flasher and such. I have tried reflashing with DFT_Android but when i get to the point to reboot it just stays on that screen and I have to pull the battery out then I am back to square 1. Now when I try to flash with DFT_Android through usb flasher I get the RSPL.cpp (723) error.
Thanks in advance.
EDIT:
I found a fix for the USB flasher error from this thread http://forum.xda-developers.com/showthread.php?t=895655, I just put those 2 files in with the DFT_Android folder and ran the DAF.exe now it is flashed again but still does not restart itself. If I can get it to restart itself I can boot into android.

doat said:
I have searched and could not find a thread with the exact problem I have, I hope I did not miss it if there is one.
I tried to install android and followed this guide, http://forum.xda-developers.com/showthread.php?t=609477 and I was in android working fine. Then I tried to install Clockwork Mod through active sync and things went completely downhill from there. Long story short I tried to flash it back to where i was and now I cannot boot into windows since it's gone and when i try to boot into android it says Fatal HIT 1 or something like that. Is there a way to put a rom onto my sdcard and flash it without having to use active sync or anything like that?
The menu I can access is the MAGLDR menu so I can do USB Flasher and such. I have tried reflashing with DFT_Android but when i get to the point to reboot it just stays on that screen and I have to pull the battery out then I am back to square 1. Now when I try to flash with DFT_Android through usb flasher I get the RSPL.cpp (723) error.
Thanks in advance.
EDIT:
I found a fix for the USB flasher error from this thread http://forum.xda-developers.com/showthread.php?t=895655, I just put those 2 files in with the DFT_Android folder and ran the DAF.exe now it is flashed again but still does not restart itself. If I can get it to restart itself I can boot into android.
Click to expand...
Click to collapse
From what I understand you have problems with installing Android and MAGLDR, and you want to revert to your stock ROM. Here is a link read carefully instructions:
Flashing 512 LEO: http://forum.xda-developers.com/showthread.php?t=609477
Flashing 1024 LEO: http://forum.xda-developers.com/showthread.php?t=653614

I got the We hacked it screen and now I am trying DFT_Android flash again. Thanks for the quick response hopefully it will boot into droid now if so then I will just leave it there.
Well it finished flashing but the phone did not restart, how do I fix that? Should I downgrade to an older version of MAGLDR, like 1.11 or 1.12?
EDIT: I made some progress, I got as far as the white HTC splash screen then it showed the android notification bar and a bar that said News under it and the rest of the screen was black, then the phone froze there. I pulled out the battery and tried to Boot an Nand and it said NAND Kernel load failure.

Okay I am now in android, last time I was in droid I tried to flash clockwork mod through usb since I did not have an sd card at the time and that is what messed up the phone.
The only problem now is when I flash to Hyperdroid CM7 through clockwork mod it does not boot into android it just goes to MAGLDR and when I select Boot AD NAND it says kernel failure

Quick update, I got into android and set it all up but when i reboot or turn the phone on it goes to the MAGLDR menu, how can I get it to boot straight into android?

doat said:
Quick update, I got into android and set it all up but when i reboot or turn the phone on it goes to the MAGLDR menu, how can I get it to boot straight into android?
Click to expand...
Click to collapse
Do you mean it loads the menu then stops on menu or loads magldr then loads Android?
If its the latter then thats what its supposed to do.

TheATHEiST said:
Do you mean it loads the menu then stops on menu or loads magldr then loads Android?
If its the latter then thats what its supposed to do.
Click to expand...
Click to collapse
It just shows MAGLDR but no menu and I have to take out the battery, hold the power button to get the menu then select Boot AD NAND to get into Android but most of the time it just stays on the GO GO GO! screen and I have to reflash clockwork mod then the rom and then it loads android fine when i select Boot AD NAND.
Oh I just put the battery back in and just turned the phone to see if it will boot into android and it is. lol I guess i just needed to wait little longer.
Thank you both very much

Hi Doat,
What you need to do is download a stock rom in the language your device was shipped.
* Extract the exe (right klick) and rename the RUU_Signed.nbh to LEOIMG.nbh
* Copy it to your storage card
* Put your device in bootloader (just take the battery out and in and press volume down+power off button at the same time)
* Follow the on screen instructions
That should bring you back to stock rom.
This will bring everything back to factory defaults including the SPL, so if you like to flash a custom rom after you need to flash HSPL again.
Grtz, Leo

Thanks for posting it up anyway it is good to know in case I have to revert back to stock, I really appreciate it.

Maybe I misunderstood your post, I taught you were stuck on boot with MAGLDR.
doat said:
Thanks for posting it up anyway it is good to know in case I have to revert back to stock, I really appreciate it.
Click to expand...
Click to collapse

Laurentius26 said:
Maybe I misunderstood your post, I taught you were stuck on boot with MAGLDR.
Click to expand...
Click to collapse
Sorry about the confusion I was just stuck on booting into android.

Issue with an HD2 bootloader!

Okay i have a question, my friend brought me an hd2 phone similar to the one i have. Thing is that he tried to install android on it and im not sure what he did wrong. I can reach MAGLDR when i turn on the phone but it wont boot on android and or reach the bootloader no matter what i do. Question is, is there anyway to flash a bootloader via the usb flasher on MAGLDR or is the phone simply bricked because of that?? By the way yes i have taken the battery out tons of times and tried to turn on with button down and power and even tried the reset button on the back of the phone without luck.

enelyam said:
Okay i have a question, my friend brought me an hd2 phone similar to the one i have. Thing is that he tried to install android on it and im not sure what he did wrong. I can reach MAGLDR when i turn on the phone but it wont boot on android and or reach the bootloader no matter what i do. Question is, is there anyway to flash a bootloader via the usb flasher on MAGLDR or is the phone simply bricked because of that?? By the way yes i have taken the battery out tons of times and tried to turn on with button down and power and even tried the reset button on the back of the phone without luck.
Click to expand...
Click to collapse
Try only holding the volume down and plugging the phone into a computer. If that doesn't work, you can install different android ROM's through recovery and some old ones even flash through usb flasher. It was probably a bad install and at least it will boot into android when you clean flash a different ROM.

Hey thanks for the fast response. Ok the thing is, that he installed MAGLDR 1.11. And i cant see any option to get into AD recovery. But to be honest ive never used 1.11 before so i dont know if its possible to use cwm with it. Anyways, I tried with 2 different roms via usb flasher but it wont load android. In fact, when i turn it on and it boots everything seems to be fine. After the GO GO GO it will just show the DFT logo and it stays like that. I tried the DLdesire rom earlier and now it wont show the DFT logo but the DLdesire one. But it just stays there and thats it. Like i said, I cant reach the bootloader and im afraid i wont be able to update MAGLDR to 1.13.

That takes me to antoher question. Will MAGLDR work even when maybe he didnt install HSPL? Because the only thing i can think of is that maybe he didnt. Oh well, who knows what was done to that phone . Anyways if someone have gone thru something similar please i need advice.

Hspl and radio must be already correct since magldr starts. The phone would go immediately to the splashscreen and hang there if either were wrong. You wouldn't see magldr at all.
" ad recovery" is only an option in magldr 1.13,, for 1.11 you would find the SD card version of cwm and start it by choosing "ad SD" in magldr.
As for "can't enter bootloader" ( I assume you're doing it right... voldown held, power tap and release) the only time I've seen that fixed was recently when a Guy disconnected the hard key ribbon cable, but that could be a fluke/totally different problem, so I wouldn't recommend it.

Ok so if im getting into MAGLDR it means that even though i cant reach the bootloader i can still flash a rom and it will work. So far i have tried a couple roms via usb flasher and none of them work.

Also, im looking up in google for the SD version of CWM for about an hour now and all i can find is the magldr 1.13 tutorials and stuff like that. Is there a special version of CWM for SD and if so, can someone provide a link on that?

Look for the thread titled something like "clockwork recovery yes/no " (look for the yes/no part especially) there are three versions in there, nand flash, update.zip and SD versions.
As for using USB flasher to flash roms, as far as I know only the first, proof of concept rom uses USB flasher mode,, all the recent roms are flashed from SD card through cwm.

Allright thanks a lot m8! you have been very helpful... happy new year by the way!

Okay, i still have issues with the HD2. I know im doing everything the way its supposed to be, and still when i hit AD sd the phone will do everything fine and even the GO GO GO message but still no recovery at all. If i try to install a sd type rom it will boot up to the Roms splash screen but that is it, it wont go further. What i dont understand is that MAGLDR will work just fine, adn when i flash anything the phone will take it with no errors. But then it wont load the recovery and or specific rom... Any ideas what might be???? Just remember, im not able to boot from the bootloader so im trapped inside MAGLDR.

[Q] 2 dysfunctional HD2's Dont know what to do anymore

MY PROBLEM IS:​I can't get the HD2 into the bootloader and/or get my PC to recognize the phone via WMDC.
Its just so unresponsive, All its doing is Vibrating constantly/Vibrating patterns/black illuminated screens/ & very rarely, the "Loading please wait" screen with the green android and some other figure I forgot in the bottom right corner. Then on the top it gets stuck on the "aMAGLDR v1.11" and other descriptive words/numbers below it, on the top center.
- INTRO -​
Hi, I'm new to XDA-developers forum, and I have 2 non-working HD2's that have been sitting around for quite some time now.
I've recently tried to get it fixed and get into this type of phone modding, as I can see HD2's are very popular for tweaking software's and such.
I have been searching around the web, more so the XDA forums, for answers to my "Special case" (yes I've seen the video when you first sign up for an account on XDA, quite funny ) of a conundrum...
Anyway, 1 HD2 is fully dysfunctional and shows no sign of life (No vibration/lights) but the lower portion of the back does get warm when I try and charge it. I have no hope for this HD2 and I think its only good for spare parts for someone else.
The other HD2 is "somewhat" functional. Sometimes if I get lucky it vibrates continuously or repetitively.
What I know about the half functioning phone:
Let my friend have it, he did some flashing of the ROM, it stopped working after awhile, and then he gave it back to me because he got another phone.
Sometimes after turning it on, it gets suck on the "aMAGLDR v1.11" screen.
I've searched up "MAGLDR" and know that its some kind of custom bootloader or so.
I've searched up how to update it to "MADLDR v1.13" and update the radio and/or use the "RUU-LEO" file.
I have all those files&programs downloaded and ready to go.
Thank you for reading my thread​
It would be AWESOME if someone could help me, or even inform me of what has happened with it. If you need further answers about my two HD2's please ask me the questions, I would love to try and answer them!

DavisN said:
MY PROBLEM IS:​I can't get the HD2 into the bootloader and/or get my PC to recognize the phone via WMDC.
Its just so unresponsive, All its doing is Vibrating constantly/Vibrating patterns/black illuminated screens/ & very rarely, the "Loading please wait" screen with the green android and some other figure I forgot in the bottom right corner. Then on the top it gets stuck on the "aMAGLDR v1.11" and other descriptive words/numbers below it, on the top center.
- INTRO -​
Hi, I'm new to XDA-developers forum, and I have 2 non-working HD2's that have been sitting around for quite some time now.
I've recently tried to get it fixed and get into this type of phone modding, as I can see HD2's are very popular for tweaking software's and such.
I have been searching around the web, more so the XDA forums, for answers to my "Special case" (yes I've seen the video when you first sign up for an account on XDA, quite funny ) of a conundrum...
Anyway, 1 HD2 is fully dysfunctional and shows no sign of life (No vibration/lights) but the lower portion of the back does get warm when I try and charge it. I have no hope for this HD2 and I think its only good for spare parts for someone else.
The other HD2 is "somewhat" functional. Sometimes if I get lucky it vibrates continuously or repetitively.
What I know about the half functioning phone:
Let my friend have it, he did some flashing of the ROM, it stopped working after awhile, and then he gave it back to me because he got another phone.
Sometimes after turning it on, it gets suck on the "aMAGLDR v1.11" screen.
I've searched up "MAGLDR" and know that its some kind of custom bootloader or so.
I've searched up how to update it to "MADLDR v1.13" and update the radio and/or use the "RUU-LEO" file.
I have all those files&programs downloaded and ready to go.
Thank you for reading my thread​
It would be AWESOME if someone could help me, or even inform me of what has happened with it. If you need further answers about my two HD2's please ask me the questions, I would love to try and answer them!
Click to expand...
Click to collapse
Those repetitive vibrations on starting are not a good sign(usually it means a non/working CPU/motherboard)!
You should flash a stock ROM and see what happens, but I suspect it won't boot up and you'll get again those vibrations: it worth try it and let me know!
Good luck!

Are you able to get to the tricolored screen by holding the power button and the volume down button? If you can get there, you may be able to task29 it and flash it with a new radio. My guess is someone flashed it with the wrong radio. Once it has the correct radio, if there is no hardware damage, it should work again.

I broke my digitizer . I'll be interested in buying the completely dysfunctional one from ya . Send me a pm if you're interested .
Sent from my HTC HD2 using Tapatalk

joshnchen said:
Are you able to get to the tricolored screen by holding the power button and the volume down button? If you can get there, you may be able to task29 it and flash it with a new radio. My guess is someone flashed it with the wrong radio. Once it has the correct radio, if there is no hardware damage, it should work again.
Click to expand...
Click to collapse
Yes, after I posted this thread, I was able to get into the tricolored screen. After that I tried to update the MAGLDR to V1.13, the screen got into the HTC loading screen with a progress bar stuck at 0% then on the computer it says there has been a communication error.
So my problem now is communication from my HD2 to PC, Which is weird because on the tricolored screen, the text switched to USB and I thought I figured it out, but no...communication error.
I am willing to do Task29 but I'm not aware of the risks or precedures.

Ok first off go to here and download the HD2 NAND Toolkit then install it o. Your computer. Next open the toolkit and then connect your HD2 to your computer via USB. Then use the toolkit to run the Task 29. Be warned though the Task 29 will totally delete the ROM partition of the NAND memory in your HD2 so you will not have a ROM on the device then so it will not boot to anything but the bootloader. Next use the Toolkit to flash either a Window's Mobile ROM, MAGLDR, or clk, you can also use it to flash Clockwork Mod Recovery.

T-Macgnolia said:
Ok first off go to here and download the HD2 NAND Toolkit then install it o. Your computer. Next open the toolkit and then connect your HD2 to your computer via USB. Then use the toolkit to run the Task 29. Be warned though the Task 29 will totally delete the ROM partition of the NAND memory in your HD2 so you will not have a ROM on the device then so it will not boot to anything but the bootloader. Next use the Toolkit to flash either a Window's Mobile ROM, MAGLDR, or clk, you can also use it to flash Clockwork Mod Recovery.
Click to expand...
Click to collapse
Ok, I have gotten the Tool kit but I wasn't able to perform task29.
I got a communication error again, I have tried to do task29 twice.
Here are some screenshots...

HD2
So my problem is still with the communication errors I keep getting if I try to do anything.
Is there anything I can do with the Micro SD card?

DavisN said:
So my problem is still with the communication errors I keep getting if I try to do anything.
Is there anything I can do with the Micro SD card?
Click to expand...
Click to collapse
You can run a Task 29 via SD card. You need to go to here and download the Repack by ShaDrac. Then right click the file and unzip it. Then find the .nbh file and rename it to LEOIMG.nbh and place it on the root of your SD card. Then boot into the bootloader and follow the on screen instructions.

T-Macgnolia said:
You can run a Task 29 via SD card. You need to go to here and download the Repack by ShaDrac. Then right click the file and unzip it. Then find the .nbh file and rename it to LEOIMG.nbh and place it on the root of your SD card. Then boot into the bootloader and follow the on screen instructions.
Click to expand...
Click to collapse
The only thing I need to put on the SC card is the LEOIMG.nbh right

DavisN said:
The only thing I need to put on the SC card is the LEOIMG.nbh right
Click to expand...
Click to collapse
Yeah that is it, just copy the .nbh file and rename it to LEOIMG.nbh. Then copy it to the root of your SD card.
Edit: Once the Task 29 is done your HD2 will only boot to the first splash screen and you will be able to boot into the bootloader also. This is because the Task 29 removed the ROM from your HD2 and you will have to re-flash clk or MAGLDR then a recovery and then a Android ROM. Or you can always flash as Windows Mobile ROM.

T-Macgnolia said:
Yeah that is it, just copy the .nbh file and rename it to LEOIMG.nbh. Then copy it to the root of your SD card.
Edit: Once the Task 29 is done your HD2 will only boot to the first splash screen and you will be able to boot into the bootloader also. This is because the Task 29 removed the ROM from your HD2 and you will have to re-flash clk or MAGLDR then a recovery and then a Android ROM. Or you can always flash as Windows Mobile ROM.
Click to expand...
Click to collapse
Alright, I got into boot loader mode, then it goes onto a completely white screen with "Loading..." on the top.
After 5 minutes or so, the screen turns off with no instructions to follow after "Loading...".
I pressed the power button to see if it still works and goes into the old MAGLDR v1.11 screen with no menus/options.
Am I suppose to keep holding the Vol down button or something, I think im doing it wrong
Edit: I charged the phone before trying it again for a few hours and I think it was on the white "Loading..." screen for the whole charge.
I don't know whats wrong with it :d

DavisN said:
Alright, I got into boot loader mode, then it goes onto a completely white screen with "Loading..." on the top.
After 5 minutes or so, the screen turns off with no instructions to follow after "Loading...".
I pressed the power button to see if it still works and goes into the old MAGLDR v1.11 screen with no menus/options.
Am I suppose to keep holding the Vol down button or something, I think im doing it wrong
Edit: I charged the phone before trying it again for a few hours and I think it was on the white "Loading..." screen for the whole charge.
I don't know whats wrong with it :d
Click to expand...
Click to collapse
First off sorry for the lag in response but I went to sleep not long after I posted my last response last night. If you never saw a box appear on the HD2 screen that asks you if you wanted to install the update and to press the power button to do so, then you did not run the Task 29. I am pretty sure you didn't anyway because you said you could still boot into MAGLDR 1.11 and if you had run the Task 29 then MAGLDR would no longer be on your HD2.
When you boot into the bootloader by holding the volume down button down and powering on the HD2 continue to hold the volume button down until you see searching. When you see searching you can release the volume down button and then you should see the window pop up that ask if you want to install the update and if so to press the power button to continue. Press the power button and the Task 29 will run, you should see a progress bar on the screen of the HD2.
Once the progress bar is done the HD2 should restart, but it will not have a ROM to boot so just pull the battery to turn it back off. Next, if you want to use Android, you need to install MAGLDR 1.13 or clk. You can install either one of these via SD card, just like the Task 29 you will have to copy the .nbh file for the custom bootloader you want to use to the root of your SD card and rename it LEOIMG.nbh. Make sure to remove the LEOIMG.nbh file that you used for the Task 29. Personally I prefer clk cause it makes the HD2 run like a native Android device, but you are having a communication error so this may lead to problems if you use clk as you have to flash Clockwork Mod Recovery via USB when you use clk. You know I would suggest you try a different USB cable as you might just have as faulty USB cable and that is what is causing the communication error. I would highly suggest you do this before trying to do anything at all more with the SD card. If you try another cable and it does not work then your HD2 more than likely has a faulty mini USB port.
If you try another cable and it works you can just use the toolkit to run the Task 29 and then use it to install either MAGLDR 1.13 or clk and then Clockwork Mod Recovery.

T-Macgnolia said:
First off sorry for the lag in response but I went to sleep not long after I posted my last response last night. If you never saw a box appear on the HD2 screen that asks you if you wanted to install the update and to press the power button to do so, then you did not run the Task 29. I am pretty sure you didn't anyway because you said you could still boot into MAGLDR 1.11 and if you had run the Task 29 then MAGLDR would no longer be on your HD2.
When you boot into the bootloader by holding the volume down button down and powering on the HD2 continue to hold the volume button down until you see searching. When you see searching you can release the volume down button and then you should see the window pop up that ask if you want to install the update and if so to press the power button to continue. Press the power button and the Task 29 will run, you should see a progress bar on the screen of the HD2.
Once the progress bar is done the HD2 should restart, but it will not have a ROM to boot so just pull the battery to turn it back off. Next, if you want to use Android, you need to install MAGLDR 1.13 or clk. You can install either one of these via SD card, just like the Task 29 you will have to copy the .nbh file for the custom bootloader you want to use to the root of your SD card and rename it LEOIMG.nbh. Make sure to remove the LEOIMG.nbh file that you used for the Task 29. Personally I prefer clk cause it makes the HD2 run like a native Android device, but you are having a communication error so this may lead to problems if you use clk as you have to flash Clockwork Mod Recovery via USB when you use clk. You know I would suggest you try a different USB cable as you might just have as faulty USB cable and that is what is causing the communication error. I would highly suggest you do this before trying to do anything at all more with the SD card. If you try another cable and it does not work then your HD2 more than likely has a faulty mini USB port.
If you try another cable and it works you can just use the toolkit to run the Task 29 and then use it to install either MAGLDR 1.13 or clk and then Clockwork Mod Recovery.
Click to expand...
Click to collapse
Whoa, after I read your post, I went and found another cable, attached it to the PC and turned on my HD2, it goes to the MAGLDR v1.11, but it has the options where I can use the volume buttons to choose things which I have never seen on this phone before lol.
What do you suggest I do since the options came up.
Wipe it and do MAGLDR v1.13
Or do one of the options on the screen

Okay well I've tried to task29 w/ the new cable, and it still does a communication error so there might be a problem with the mini USB port.
I tried to do task29 again via sd card, and this time I held down the volume down button for like 5 minutes until my fingers slipped, but there was no "searching" screen, just a "Loading..." screen and then it turns off after 10 mins.
I'm trying to get into that MAGLDR screen again with the options but I don't know how to, it was just too random.

I kind of wonder if a wrong radio was flashed to the phone and it got semi-bricked. I bought a phone once that was like that and tried to repair it and was unable to. I think there are people out there that can jtag it.

Maybe dude, right now im just waiting until someone knows exactly whats wrong with my phone and if they can fix it :d
i did do something to the radio, but i made sure it was the correct version according to their list of radios and the radio listed on my phone.
Anyway, im pretty much stuck. cant wipe via USB cable, of 3 different kinds.
and i cant wipe via sd card either.

will go back a few years and try and find old posts on old Kaiser thread,this starts to sound familiar with white screen and comms fail,if I remember properly it was/is problem with spl/hspl.
can you post what info does show on any boot screen.
am busy at moment will try searching later tonight.
Sent from my NexusHD2 using xda premium

One time I was able to flash something onto the phone and it was the "Radio_Leo_2.15.50.14" thing...
I don't remember why I did this but I did made sure it was compatible and it worked.
So it may have been the radio, I am not sure.
I do have pics of the boot loader screen before and after the flash.

If there are no solutions, I might as well sell them both. Which I'm about to do real soon