Database Users

Phone stuck at white screen with HTC

Hi there,
I really need help!
I wanted to flash my phone with a nbh file, but I could not enter my bootloader.
I had installed HSPL3.
Now someone told me to use Flashaholic ROM update utility.
I did this, and a black screen with a % indicator appeared, not too long, it restarted, and went into a white screen with htc in the middle.
Restarting with volume down button pushed doesnt bring me into bootloader.
What can I do now?
I really need help!

Unfortunately, if you can't get your HD2 to boot into the bootloader, there's not much to be done.
Are you sure you had HSPL installed? Because from what I have heard, HSPL is there to always allow you to use it for flashing stuff, regardless of the integrity of other software parts such as the radio or the ROM, so reaching the bootloader should not be a problem for anyone.
Can you connect it to your PC via USB? If you manage to get a connection, you might just have a chance to flash another radio/ROM.

anrabi4 said:
Unfortunately, if you can't get your HD2 to boot into the bootloader, there's not much to be done.
Are you sure you had HSPL installed? Because from what I have heard, HSPL is there to always allow you to use it for flashing stuff, regardless of the integrity of other software parts such as the radio or the ROM, so reaching the bootloader should not be a problem for anyone.
Can you connect it to your PC via USB? If you manage to get a connection, you might just have a chance to flash another radio/ROM.
Click to expand...
Click to collapse
I installed HSPL3, and it said it was succesfull so...
After that I installed a custom rom with an utility that came with it (Dutty's)
So far I know, I cannot get any connection, but I try to download a stock rom (an utility exe) from HTC.com.
But I think this won't work right? because you have to sync.

You could try and flash a stock ROM via the SD Card, see if that works. There are some instructions here on XDA in the ROM Development section, check it out there.
Basically, once you have downloaded an official ROM from htc.com, extract it as if it were an archive and get the ruu_signed.nbh. Rename it to LEOIMG.nbh. Then take your SD Card, format it to FAT32, place the LEOIMG.nbh on the card and put it in your phone. While holding down the volume down button, boot the phone and a white Loading... screen should appear and the flashing process should begin.
I`m afraid this won't work either, as the bootloader is supposed to show up in order for you to be able to flash anything, but it's better than doing nothing, so...

anrabi4 said:
You could try and flash a stock ROM via the SD Card, see if that works. There are some instructions here on XDA in the ROM Development section, check it out there.
Basically, once you have downloaded an official ROM from htc.com, extract it as if it were an archive and get the ruu_signed.nbh. Rename it to LEOIMG.nbh. Then take your SD Card, format it to FAT32, place the LEOIMG.nbh on the card and put it in your phone. While holding down the volume down button, boot the phone and a white Loading... screen should appear and the flashing process should begin.
I`m afraid this won't work either, as the bootloader is supposed to show up in order for you to be able to flash anything, but it's better than doing nothing, so...
Click to expand...
Click to collapse
Does not work, still hangs in htc bootscreen.
What I have to do now? =(
I hope you have any more suggestions for me.
I will read it within 20 min, because I have to go soon for 20 min.
I really need my phone fixed =(

Hi, if I remember correctly, you already said in the Artemis-thread, that the VOL DOWN button is broken. If this is the case, I fear there is not much you can do...

Have the same problem too.
I've installed a few roms with no worries, tried one about an hour ago that performs a Task 29 and i'm also now stuck at the white HTC screen...
it says the task29 was succesfull and then got stuck on the white HTC screen and the rom failed to load as the laptop did not detect a usb connection...
I've downloaded a stock rom and put it on the SD card named LEOIMG.nbh and tried pressing the vol down button, the Red,green,blue,white screen appears i can see
PB81100 HX-BC
SPL 2.08.Hspl 8g XE
0x05
CotullaHSPL 0x30
Then "serial" at the bottom or if i have the phone connected to the pc then "USB" appears.
If i hold both buttons and perform a Hard reset the phone asks to press Vol up button then says restored really quickly then freezes at the white HTC screen..
Any suggestions
Cheers

Actually got it sorted now, the rom had the Flashaholic utility built in which i haven't used before.
As we speak the rom is now installing phew (stop sweating now)...
Thought i had bricked it...

MaxKaul said:
Hi, if I remember correctly, you already said in the Artemis-thread, that the VOL DOWN button is broken. If this is the case, I fear there is not much you can do...
Click to expand...
Click to collapse
It's not broken, it just worked before I did the task29.
The phone is empty, and has no bootloader, and no ROM.

wakers said:
Have the same problem too.
I've installed a few roms with no worries, tried one about an hour ago that performs a Task 29 and i'm also now stuck at the white HTC screen...
it says the task29 was succesfull and then got stuck on the white HTC screen and the rom failed to load as the laptop did not detect a usb connection...
I've downloaded a stock rom and put it on the SD card named LEOIMG.nbh and tried pressing the vol down button, the Red,green,blue,white screen appears i can see
PB81100 HX-BC
SPL 2.08.Hspl 8g XE
0x05
CotullaHSPL 0x30
Then "serial" at the bottom or if i have the phone connected to the pc then "USB" appears.
If i hold both buttons and perform a Hard reset the phone asks to press Vol up button then says restored really quickly then freezes at the white HTC screen..
Any suggestions
Cheers
Click to expand...
Click to collapse
task29 DELETES the ROM. You NEED to install a ROM. A Radio-ROM should be installed automatically with task29. If this isn't the case, you need to install a Radio-ROM too. You can either install the HTC ROM or you can install a custom ROM like forum.xda-developers.com/showthread.php?t=612580
Suggestion: Enter bootloader -> connect USB -> install ROM with CustomRUU

MaxKaul said:
task29 DELETES the ROM. You NEED to install a ROM. A Radio-ROM should be installed automatically with task29. If this isn't the case, you need to install a Radio-ROM too. You can either install the HTC ROM or you can install a custom ROM like forum.xda-developers.com/showthread.php?t=612580
Suggestion: Enter bootloader -> connect USB -> install ROM with CustomRUU
Click to expand...
Click to collapse
Do I have to repeat it again? there is NO BOOTLOADER

joshoon said:
Do I have to repeat it again? there is NO BOOTLOADER
Click to expand...
Click to collapse
If you'd read the entire post, you'd notice, that I quoted the user "wakers", who seems to be able to enter bootloader.

MaxKaul said:
If you'd read the entire post, you'd notice, that I quoted the user "wakers", who seems to be able to enter bootloader.
Click to expand...
Click to collapse
Well im not able to.
I did a HSPL before then I putted a custom ROM Dutty's on the device.
After that I putten a Stock ROM on it again, and then I used Flashaholic, and after task29 it got stuck.

Well no bootloader means no HSPL which is good news for your warranty coverage..
Just go to HTC service and play dumb " uhm i was playing around websites with a flash game and uhm my phone uhm rebooted and is like stuck ever since in uhm HTC logo"
Now if the case for not being able to load the bootloader is a broken volumedown button, yeah ur pretty screwed, prepare to dive in ur wallet.

Were do you live? If you need help and there's one living nereby maybe we can help (p.e. a full battery) I live in the eastern part of the Netherlands (Overijssel) PM me if you can come.

On the Kaiser (my previous phone) I also had a problem I couldn't enter the bootloader anymore, but I can't remember why or what I did to recover it.
- If it was an allmost empty battery and recharged it?
- If I have used a special tool to connect?
I really can't remember.
If I read your story, I think you have loaded a corrupted NBH thru SDCard method, otherwise i think you cannot wipe your bootloader. Task29 only wipes the ROM area not the bootloader.
Have you tried to contact Bepe or Cotulla, cause i think they know everything about (H)SPL.
Otherwise you can start building a new house (you've got your first brick )

have you checked you battery connections, the middle one is notorious for getting bent out of shape at which point the battery will not charge and you can't flash you ROM.

chris2busy said:
Well no bootloader means no HSPL which is good news for your warranty coverage..
Just go to HTC service and play dumb " uhm i was playing around websites with a flash game and uhm my phone uhm rebooted and is like stuck ever since in uhm HTC logo"
Now if the case for not being able to load the bootloader is a broken volumedown button, yeah ur pretty screwed, prepare to dive in ur wallet.
Click to expand...
Click to collapse
I'm 100% sure it's not the volumebutton, and yes Im gonna play a bit dumb ofc, but I already have another story.
henk-jan said:
Were do you live? If you need help and there's one living nereby maybe we can help (p.e. a full battery) I live in the eastern part of the Netherlands (Overijssel) PM me if you can come.
Click to expand...
Click to collapse
It's costs a lot for a trip to there.
Btw, I tried a full battery too, didn't work. (I have two)
webpatrick said:
On the Kaiser (my previous phone) I also had a problem I couldn't enter the bootloader anymore, but I can't remember why or what I did to recover it.
- If it was an allmost empty battery and recharged it?
- If I have used a special tool to connect?
I really can't remember.
If I read your story, I think you have loaded a corrupted NBH thru SDCard method, otherwise i think you cannot wipe your bootloader. Task29 only wipes the ROM area not the bootloader.
Have you tried to contact Bepe or Cotulla, cause i think they know everything about (H)SPL.
Otherwise you can start building a new house (you've got your first brick )
Click to expand...
Click to collapse
I think it's bricked man, my bro is looking for the papers soon, and then im going to the KPN shop (the provider), because the phone has been ordered from there.
nrfitchett4 said:
have you checked you battery connections, the middle one is notorious for getting bent out of shape at which point the battery will not charge and you can't flash you ROM.
Click to expand...
Click to collapse
All the connections look fine.

need help, bricked htc hd2

my htc hd2 is bricked, the screen is stuck at the white tmobile screen.
However, i can get to the red, green, blue, and white screen.
i read a comment on a old thread, there was a way to fix it, but they didn't post the comment. So is there a way to fix my hd2?
more details on how it might be bricked.
i left my phone uncharged causing it freeze, so i reset it.
that when i took out the battery and ever since
when i try trying it on, it stood in the white tmobile screen.

thi713 said:
my htc hd2 is bricked, the screen is stuck at the white tmobile screen.
However, i can get to the red, green, blue, and white screen.
i read a comment on a old thread, there was a way to fix it, but they didn't post the comment. So is there a way to fix my hd2?
more details on how it might be bricked.
i left my phone uncharged causing it freeze, so i reset it.
that when i took out the battery and ever since
when i try trying it on, it stood in the white tmobile screen.
Click to expand...
Click to collapse
First off your HD2 is not bricked. If it wax bricked it would not so much as turn on.To save your HD2 do one of these two things.
Download the official update from T-Mobile.com. Look behind your battery to find your IMEI number to enter. Next make sure your HD2 is good and charged I know this is hard as it will not boot but just let it charge for a good while as you do not want the battery to die during either method of flashing. Now while the phone is off hold the volume down button down and press the power button but keep holding the volume down button down. When the phone is in bootloader(multicolor screen) connect your phone to the computer via USB and wait for Serial in the white bar of the bootloader screen to change to USB and for your computer to show it recognizes your phone then right click on the update package and click run as administrator and run the update utility. This should flash the stock ROM but if you have MAGLDR you will loose it and if you have HSPL you might lose it.
Now the secound option you have is to right click on the update package and click on view or explore wich ever one you see and find the RUU_signed.nbh file and rename it to leoimg.nbh or LEOIMG.nbh as it is not case sensitive. Then take a 500MB to 4GB SD card that is formated with Fat 32 and place it into a USB SD card reader and plug it into a USB port on your computer. If you are not sure about the format. Go to "My Computer" and find the card reader, it will be a removable drive or a mass storage device (make sure to make a back up copy of the intior contents of the SD card first as it will wipe the card clean)and right click on it and click format and then Fat 32. Copy the leoimg.nbh file to the root of the SD card. After coping it to the SD card place the card in your phone and put it into bootloader the same as mentioned above but keep the volume down button held down until you see searching on the phone screen and then let the volume down button go. You will have to press the power button to comfirm it. This should flash your phone to complete stock as it will remove MAGLDR, CWM, and HSPL if you have it on your phone.
There is other options to but I highly suggest going back to stock and then starting back over again as to me it just simplifies things some. Also seeing as you have a T-Mobile HD2 do not flash a radio that looks like any of these 2.04.50.xx, 2.05.50.xx, or any radio like this 2.xx.51.xx as any of these radios will brick a T-Mobile HD2.

after flashing it back to stock rom, can i flash an android rom again?
is there another way where i can skip the stock rom and just flash an android rom?

thi713 said:
after flashing it back to stock rom, can i flash an android rom again?
is there another way where i can skip the stock rom and just flash an android rom?
Click to expand...
Click to collapse
Yes you can reflash a Andriod ROM if you go back to stock but you would have to flash HSPL 2.08 again, flash MAGLDR 1.13 again, and CWM if you want to use it.
If you just want to flash another Andriod ROM just turn your HD2 off and then turn it back on button keep the power button down until the main menu of MAGLDR comes up (that is if you already have MAGLDR on your HD2) and then follow the instructions from the Andriod ROM on how to flash it using MAGLDR or CWM if you have it.
If you do not have HSPL and MAGLDR on your HD2 uou will have to flash both to hour HD2 befor you can flash a Andriod ROM. To flash these do this but your HD2 into bootloader (muticolor screen) and connect it to your computer via USB cable and wait to see USB in the white bar of the bootloader screen and that your computer recognizes your HD2 then flash wichever one you are wanting to flash. You will have to do this for every individual thing you want to flash. You also need to flash HSPL 2.08 first then MAGLDR 1.13 and then CWM if you want it.

thi713 said:
after flashing it back to stock rom, can i flash an android rom again?
is there another way where i can skip the stock rom and just flash an android rom?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=653614
read this post it will help you to install android dont end up bricking your phone

i have a lot of problems using the magldr, for example i am not able to find a rom that works for me. some of the roms i tried to install won't work. can someone refer a rom that has great battery life? Another problem is that it keep freezing withever i try to boost a rom up. Any answers for that? is there another way for me to flash an android rom without using magldr?

thi713 said:
i have a lot of problems using the magldr, for example i am not able to find a rom that works for me. some of the roms i tried to install won't work. can someone refer a rom that has great battery life? Another problem is that it keep freezing withever i try to boost a rom up. Any answers for that? is there another way for me to flash an android rom without using magldr?
Click to expand...
Click to collapse
No you have to have MAGLDR to install Android. Try installing Clock Work Mod (CWM) and use it to install your Andriod ROM. Just do a search for Clock Work Mod for HTC HD2. Then read and follow the instructions in the ROM thread to use CWM to flash it.

i have a few problems when trying to install any rom using magldr.
First, whenever i boot up to the magldr screen, sometime it will freeze and i have to take out my battery.
Second, When installing a rom, it gets stuck at "the booting android from nand 123456 go go go" screen.
What could be wrong with my magldr, i already tried to re-installing it and it still acts up.

thi713 said:
i have a few problems when trying to install any rom using magldr.
First, whenever i boot up to the magldr screen, sometime it will freeze and i have to take out my battery.
Second, When installing a rom, it gets stuck at "the booting android from nand 123456 go go go" screen.
What could be wrong with my magldr, i already tried to re-installing it and it still acts up.
Click to expand...
Click to collapse
Take your SD card out of your HD2 and then boot it up and see if you still have the problem. If it is gone you need to back up your SD card and do a full wipe of it and reformat it using your computer and a SD card reader. Format it Fat 32.

T-Macgnolia said:
Take your SD card out of your HD2 and then boot it up and see if you still have the problem. If it is gone you need to back up your SD card and do a full wipe of it and reformat it using your computer and a SD card reader. Format it Fat 32.
Click to expand...
Click to collapse
i tried that, and it seem to work, but it still often freezes on me during usage. For example, when i am on the android market, it tends to freeze up. is there any way i can fix this? and can you recommend me an android build that doesn't have this problem?

thi713 said:
i tried that, and it seem to work, but it still often freezes on me during usage.
Click to expand...
Click to collapse
Run a task 29 on your HD2 then reclash MAGLDR and see if this helps it should, unless you have some bad boot sectors.

damn, i also tried that too, but it still freezes on me. i think i have a bad boot sector, how do i fix this?

thi713 said:
damn, i also tried that too, but it still freezes on me. i think i have a bad boot sector, how do i fix this?
Click to expand...
Click to collapse
Well you can not fix bad boot sectors persay witbout replacing the NAND memory chip which acrually requires the replacment of the intior mainboard of your HD2. Because you can not just replce the chip cause of the wah the mainboard is made. Wht you can do is use a JTAG device and some special software to go in and mark those sectors as bad so the phone will no longer try to use those sectors.

[Q][HELP!] Cant install MAGLDR

Hello, i have serious problem,
I was running Android GINGER... and after one restart i god 1234.... FAILED bla bla
After that i went to MAGLDR and tryed to reflash another rom but no succes
MAGLDR froze!!!!
I did TASK 29 on it and it removed everything, after this i am UNABLE to install MAGLDR 133 or any other on my HD2. its a 576MB from UK, using it in CROATIA.
HAD T-mob WIN 6.5, Android 2.1, and above mentioned 2.3.3 ver.
ANY IDEA HOW TO INSTALL MAGLDR AGAIN???
HSPL is COTULLA 2.08 HSPL
Did i bricked it? can i undo?
p.s. i did hardreset, didnt work.
CAN I TRY RETURN SPL and how to return to stock so i can try WMO6.5 again?
HELP i am desperate! help, payed alot for this phone, i am broke now without phone!

calm down man we've all been there at some point,
ok if you wanna go back to stock go to the htc site and download a official rom,
does your phone turn on?
can you get in bootloader?
if you can does it say spl or hspl ??

ops
i am sure you havent been there.
I GOT HSPL 2.08 by beppe and Cotula
I,ve tryed official rom, it starts counting, but at approx 10% it stops and bar goes red, and triangle with exclamation point appears next to it.
I OFF:... F**** it UP. i am so screwd!
-phone does turn on, and goes to white screen, saying htc and nothing
-i can go to 4colour bootscreen, sayes SERIAL and USB after i connect
ty for trying to help me

white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.

Demon_man said:
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Click to expand...
Click to collapse
i sayed i had android on cwm, i tryed recover but magldr crashed, and since then i have problem loading MAGLDR.
RADIO FAILED TO UPDATE, i tryed that version that you sayed but it goes to 100% then shows again that triangle with !inside. F***** i am loseing my mind!
Your way of upgrading rom wont work, gray screen shows for a glich of a second and dissapears to 4colour bootscreen.
I wish i died! i ****ed all up.
BTW i bought a phone in uk and on the back of battery sayes only serial numbers in this order:
S/N99HJY005-2
35412003-754967-0
no imei, no nothing else if helps.
i am dead, payed 500$ for it last year for this amazeing phone and now i ruined everything.

ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?

Demon_man said:
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Click to expand...
Click to collapse
I get it , how to do GRAY FLASHING THING, but i got RADIO EROOR
SAYES:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
Update Terminate
UPDATE FAIL
this happends when the bar gets to the 100%

do you have access to another pc mate with a different operating system from yours??
are you connecting phone via usb to the front or back of the pc?
have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084

Take out the battery and keep the phone off in a very cool air conditioned room for a couple hours (maybe even the refrigerator).
Put the battery back in and flash stock again.
edit: hmm. Just read that other thread, yeah you may need to jtag it...but I'd still try the fridge thing.
Edit2: worked for this guy:
nschoot said:
Sorry, for not replying before...
I put my phone in a ziplock plastic back and left it in the fridge for a few hours (I think about 8 hours or so). Then I booted it and tried to install the LEOIMG.nbh file from SD card... I kept it in the fridge while installing the image.
And somehow, it just worked first time!!
The image (from the first post of this thread) is a US demo version of Windows mobile, but I was able to install the regular ROM from the HTC site after this - without the need to keep it in the fridge.
Click to expand...
Click to collapse

demon_man said:
do you have access to another pc mate with a different operating system from yours??
Are you connecting phone via usb to the front or back of the pc?
Have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Click to expand...
Click to collapse
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!

davor.klobucaric said:
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
Click to expand...
Click to collapse
Which stock ROM did you flash?

either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return

Demon_man said:
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Click to expand...
Click to collapse
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)

davor.klobucaric said:
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
Click to expand...
Click to collapse
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.

your phone turned off??? is your battery dead??

orangekid said:
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
Click to expand...
Click to collapse
I have tryed that, thank you for your response, it went well, spl went to rom fitting, BUT,
WHITE HTC sigh on turn on, 3 RED LINES ON THE BOTTOM showing radio, and other stuff, but it constantly restarts, it wont load win 6.5. anyonne know why?

Problem with clk/magldr
was trying to flash my htc hd2 EUROP with hd2 toolkit v 4.2.0.1 i follow this steps
1-i power off my phone
2-I press in vol down button and power button in same time phone now was in 3 color mode
3- i press in task 29 on hd2 toolkit this erase my phone completely
4-then i press vol down button and power button in same time again
5- i click in clk repartition and choose 200MB
6- what happen is after all this steps my phone start with htc image blocked in white and green and i cannot boot in fast speed mode like usually.
obs, im using spl-2.0.8 HSPL by cotulla.
does anyone knows how to enter in fast speed boot mode without clk or magldr cause ive tried with these they dont work,..i just only can run wm6.5 that is .....i need help please

You are sure, you have installed a recommended radio rom?
You should use the radio rom 2.15.50.14.
Send from my Leo using Tapatalk

HD2 owner noob in need of help :|

Hi there.
In my wisdom I let a friend of mine convince me that he was the pro at "flashing roms on my HD2". To be honest, i have no clue what he was talking about but it sounded good at the time. My problem is I now own a phone that has some serious issues that I have tried fixing myself to no avail, hence me posting on these forums.
From what I have read throughout the forum I have a feeling he used the NAND method . I have attempted to fix it but nothing seems to work.
I then tried the sd method and still no luck. I took some pics of what the screen shows and hopefully someone reads this and thinks, omg this chick is completely clueless and has some idea as to how I can fix it .
I have screenshots of the issues I'm having but cant post them. Maybe I could pm them or email them if anyone is willing to help me
I realize how stupid and idiotic I sound but I'm fairly desperate to get it fixed.
Hayley.

If you're allowed to post links, upload your pics to any file server and put in here the address. Or try to send me the files via PM.
Good luck!

Explain what is the issue in detail.
There is always a fix.don't worry.
Sent from my HD2 using XDA App

Basically i'm unable to load any sort of rom onto my phone, after following numerous amounts of instruction guides etc.
The phone will load the 12345, go go go, screen, it also says it's booting from Android NAND; it then will get to an Android logo and freeze. I'm able to get into the boot menu and bootloader but can't seem to wipe the old rom off to put a new one on.
I've pretty much exhausted my options, as the guy who originally thought he was amazing at this and has done it all the time, now has no clue why it's doing this. Last time i trust someone with my phone! Haha

Have you tried to use the HD2 Toolkit to do a full wipe of the phone with Task 29? Flash Magldr, Repartition the phone to whatever the ROM you're flashing specifies.
Sent from my Desire HD using XDA App

Hey have you figure it out?

Okay, I think that there is a problem with the ROM he chose. If he picked a rom that's too big it won't boot up.
I'd try to hold down the power button, see if you can get into the MAGLDR menu.
If you can then scroll down with the volume keys and go to AD Recovery.
Clockworkmod recovery should load.
From there I would download a new ROM, HyperDroid or any CM7 based ROM are good options.
Mount the USB storage, transfer the ROM to the root of the SD card, flash zip from SD, choose the rom and flash.
I think that is the best steps to take and if it doesn't work then you should Task29 and reflash everything.
Best of luck to you

Any ROMs in particular you would recommend? I'm sort of clueless as to what is good as he's sort of left me hanging as to what programs i need and what i should and shouldnt be doing, so irritating haha.

Are you flashing roms using ad recovery option in magldr ?
Sent from my HTC HD2 using XDA App

Trying to, I tried one last night, and it just kept telling me the installation was aborted.
Getting very close to giving up, nothing I seem to be doing is working, not entirely sure if what I'm doing is right though. Having no experience of doing this obviously makes the situation incredibly difficult, I really appreciate all your time and effort with helping me though.

Okay, I think we should task 29 the phone and reinstall MAGLDR and CWM.
I know how frustrating it can be, when I first tried to root and flash my old phone, it took me 3 days of work to figure it out haha.
Okay, here's the thread for Task29, go to bottom of the first post and download the tool.
Plug your phone into your computer, and enter the bootloader by holding volume down and pressing power. Remove your SD Card and SIM card before doing this.
Ensure that it says usb at the bottom.
Go on your computer and find the .exe you downloaded.
If you're on Vista or 7, right click and hit "run as administrator".
Follow the steps on the program.
Your phone should go into a black HTC screen with a loading bar.
It should take a few seconds to finish.
Task29 essentially restores everything to factory with no ROM or anything.
After you've done this we can reflash MAGLDR and CWM.
Here's a video just in case you need some additional support with it:
http://www.youtube.com/watch?v=DtTDuc4V4cU

You probably dont have clock work mod... Flash a higher partition cwm recovery... It will work... Pm me if need help.... Theres nothing major going on in your phone... We can get ot fix
Sent from my SGH-T959V using XDA App

Thanks so much guys, will have a go and get back to you as soon as possible Much appreciated
I'm trying to use task29 currently, but it's just sitting on 0% and won't move. It's been like this for a while now?
Should i just continue to leave it?
Edit: Just received Error 262? Unsure what to do

Hayley95 said:
Thanks so much guys, will have a go and get back to you as soon as possible Much appreciated
I'm trying to use task29 currently, but it's just sitting on 0% and won't move. It's been like this for a while now?
Should i just continue to leave it?
Edit: Just received Error 262? Unsure what to do
Click to expand...
Click to collapse
could u explain what u have on your phone...................e.g
i have hardspl 3 or 2.08
magldr 1.13
magldr clockworkrecovery 5.0.2.3
radio 2.15.50.14........MOST IMPORTANT
turn your phone off,press power button and vol down button together untill you get a 4 coloured screen(red,green,blue and white) with some info..........i'll put what mine says to give u an idea,then you can do the same,then ppl might have abit more idea where your going wrong
MINE READS.......PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40

PB81100 HX-BC
SPL-2.08.000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
I know i have MAG 1.13, not sure how to check the rest though?

Hayley95 said:
SPL-2.08.000 8G XE
Click to expand...
Click to collapse
So this is the reason you could not get android running on your phone. U have stock spl...but you need HSPL!

Okay, so how do I fix this!

The best way I think is to went back to stock rom by flashing latest stock rom via sd card. Then install HSPL and if this was successful you can go back to MADLDR 1.13 and flash an NAND android.
Do you have an HD2 EU (only white hard buttons)?

best way
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
U can get a official ROM from the HTC website, make sure u DONT get the newest, but the 1.66 ROM version.
Extract the *.exe to your desktop using WINRAR and u will have a .nbh file in there.
Have fun!
---------- Post added at 03:58 PM ---------- Previous post was at 03:53 PM ----------
Hayley95 said:
PB81100 HX-BC
SPL-2.08.000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
I know i have MAG 1.13, not sure how to check the rest though?
Click to expand...
Click to collapse
more details gets you more help lol,let us know how u get on

Hayley95 said:
Hi there.
In my wisdom I let a friend of mine convince me that he was the pro at "flashing roms on my HD2". To be honest, i have no clue what he was talking about but it sounded good at the time. My problem is I now own a phone that has some serious issues that I have tried fixing myself to no avail, hence me posting on these forums.
From what I have read throughout the forum I have a feeling he used the NAND method . I have attempted to fix it but nothing seems to work.
I then tried the sd method and still no luck. I took some pics of what the screen shows and hopefully someone reads this and thinks, omg this chick is completely clueless and has some idea as to how I can fix it .
I have screenshots of the issues I'm having but cant post them. Maybe I could pm them or email them if anyone is willing to help me
I realize how stupid and idiotic I sound but I'm fairly desperate to get it fixed.
Hayley.
Click to expand...
Click to collapse
yea like the fellow said you chose 2.08.50.0000 instead you should have chosen the 2.08.50.hspl and you would have been fine....... i did the same thing, i was the "friend" what usually takes 15 minutes took me 2 hours........ you are fine hun!

the serial on bootleader won't turn to USB

Hi everyone! I've updated my HTC HD2 OS few days ago from adroid 2.3.5 ( GBrid ) to 4.2.1 ( JBean).. it boots normally the stick together, htc and android screen show up.. but it won't go throw that..
I've tried to go into clockworkmod but i couldn't and the bootloader telling me that the " security Unlocked ".. like i couldn't to change the hspl thing..
please guy's i need help..

...
and this is a video that how the hd2 work's with me
in a rar file

the vieled said:
Hi everyone! I've updated my HTC HD2 OS few days ago from adroid 2.3.5 ( GBrid ) to 4.2.1 ( JBean).. it boots normally the stick together, htc and android screen show up.. but it won't go throw that..
I've tried to go into clockworkmod but i couldn't and the bootloader telling me that the " security Unlocked ".. like i couldn't to change the hspl thing..
please guy's i need help..
Click to expand...
Click to collapse
The HD2 doesn't say "Security Unlocked", you mean it has "HSPL".
You couldn't change the "hspl thing"? Why do you want to change it?
From the video, I assume it's cLK with Android on NAND, so no need for HSPL changing. And if that's the case, depending on the version you have, you need to repartition for JellyBean (bigger system partition than Gingerbread). But we still don't know why you couldn't get into the clockworkmod recovery. That being said, how could you flash JB when you were not even able to access the recovery?
...argh, your post is a mess. Needless to say how irrelevant your title is to your post content.
Please don't panic, and tell us everything about your phone.
Your H/SPL version, your radio, your bootloader, your setup.
We need more info in order to be able to help you.

I'm so sorry I didn't describe it very well for u.. coz i'm new on android and don't know very much..
when I flash the phone, I was able to access the recovery mood from the reboot choice inside the OS ( gingerbread ), but now without goin into the OS I can't use the recovery mood again..
and this what i see in the bootleader screen..
security Unlocked
PB81*** SS-B3
SPL-2.08.HSPL 8G XE
0x05
CotuIIaHSPL 0x50
these are on the red screen
serial
and this is in the white one
I'm soooo sorry again about the distribution but I'm not really good in English..
I hope I give the needed information
Thank you very much..

I am going to go by the assumption that you have cLK. But I need you to verify which version it is. Power off the phone, then power on while holding the back button. Tell me what shows up.
Depending on the version you're going to have to
-Boot up phone with back button held. Choose Settings > Resize Partitions. (If you have the new cLK)
-Use the HD2 NAND Toolkit (google it) to repartition your system. (If you have the old cLK)
How to know which cLK you have?
If you do what I told you earlier (Hold back + boot) and you see
*a bunch of unorganized lines, you have the old cLK.
*some options that you can navigate and choose from using your volume rockers, you have the new cLK.
After repartitioning, on either versions you can access the recovery by 1-powering off the phone. 2-power on with "Home" button held. Reflash the ROM on the new partition sizes mentioned on the OP of the ROM's thread and you should be good to go.

Marvlesz said:
I am going to go by the assumption that you have cLK. But I need you to verify which version it is. Power off the phone, then power on while holding the back button. Tell me what shows up.
Depending on the version you're going to have to
-Boot up phone with back button held. Choose Settings > Resize Partitions. (If you have the new cLK)
-Use the HD2 NAND Toolkit (google it) to repartition your system. (If you have the old cLK)
How to know which cLK you have?
If you do what I told you earlier (Hold back + boot) and you see
*a bunch of unorganized lines, you have the old cLK.
*some options that you can navigate and choose from using your volume rockers, you have the new cLK.
After repartitioning, on either versions you can access the recovery by 1-powering off the phone. 2-power on with "Home" button held. Reflash the ROM on the new partition sizes mentioned on the OP of the ROM's thread and you should be good to go.
Click to expand...
Click to collapse
THANKKK YOU BUDDY really thank you...
al hamdulilah.. u save me lol
thank you very much u expert ;P
the back button did not work with me..
i tried the other way to power on while pressing the home button and it show a some lines with some information.. after that the cLK shows up )) thank you veryy much
but will u please can u advice me what version is good to use for HD2.. but please i wanna try the Jellybean one tyyyyyy

the vieled said:
THANKKK YOU BUDDY really thank you...
al hamdulilah.. u save me lol
thank you very much u expert ;P
the back button did not work with me..
i tried the other way to power on while pressing the home button and it show a some lines with some information.. after that the cLK shows up )) thank you veryy much
Click to expand...
Click to collapse
That doesn't make sense; on cLK, the back button is to access cLK's main and the Home is to access recovery. But it doesn't matter as long as you have got it working. (But if you're confusing CWM, the recovery, with cLK, the bootloader, you're gonna have a bad time)
but will u please can u advice me what version is good to use for HD2.. but please i wanna try the Jellybean one tyyyyyy
Click to expand...
Click to collapse
If you already know what you want, why ask for advice?
Sorry, I can't give you any. But I can tell you that as of this moment, there is no JB 4.2.1 with Wi-Fi. So if you need wifi or you don't have a data plan you need to stick to 4.1.2. Again, I can't recommend any ROM. Glad to be of help.