Database Users

Please help i beg!! =( htc hd2 dose not boot past start up screen.

HELLO EVERY ONE. I AM REALLY IN BIG TROUBLE. ALL THIS HAPPENED AFTER WHEN I DOWNLOADED A TOOL FROM THE INTERNET EXPLORER. AFTER IT DOWNLOADED THE PHONE FROZE. AND SO I TOOK OF THE BATTERY FOR 3 SECONDS AND PUT IT BACK AGAIN. AND THEN PRESSED THE POWER ON BUTTON. THEN IT LOADS THE HTC BOOTING SCREEN AND WONT PASS IT. PLEASE HELP ME.
I AM USING WINDOWS XP SP2.
*WHEN I GO TO BOOT LOADER MODE HERE IS THE INFORMATION IT GIVES:
_________________
PB1100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x40
___________________
THAT ALL THE INFORMATION IT GIVES.
HERE ARE THE THINGS I HAVE DONE:
1) I TRIED A SOFT RESET.
2) I TRIED A HARD RESET USING BUTTONS.
3) I TRIED TO CONNECT IT TO THE COMPUTER VIA USB BUT IT DOSE NOT RECOGNIZE OR LAUNCH THE ACTIVE SYNC SINCE IT DOSE NOT BOOT PASS THAT HTC LOGO WHICH IS IN WHITE COLOR.
4) SO I WENT TO BOOTLOADER MODE AND CONNECTED VIA USB. BUT STILL THE ACTIVE SYNC DOSE NOT WORK.
5)SINCE IT IS CONNECTED NOW I RUN THE APLICATION HSPL.EXE BUT IT SAYS THAT I NEED SPL VERSION 1.42.000 SOME THING WHEN I ALREADY HAVE IT I THINK.
6) THEN I TRIED TO INSTALL TOM_LEO_RADIO_2.SOMETHING ITO IT USING THE UPDATEUTILITY.EXE IN THE FOLDER. UPDATE COMPLETED. SO I PRESSED THE POWER BUTTON AGAIN. BUT IT STILL DOSE NOT BOOT PAST HTC LOGO SCREEN.
7)I TRIED TO FLASH A CUSTOM ROM USING BOTH METHODS :
A) BY USING THE USB METHOD.
B)THEN I TRIED USING THE SD CARD METHOD... BUT STILL NO LUCK.
IT STILL DOSE NOT BOOT PAST HTC HD2 LOGO SCREEN.
8) THIS IS THE LAST THING I DID UP UNTIL NOW :
A)CHECKED THIS FORUM
BUT STILL IT DID NOT HELP ME SINCE I DONT KNOW WHAT HE DID TO SOLVE IT.
B) SO I AM FINALLY POSTING THIS NEW THREAD.
PLEASE PLEASE HELP ME SINCE I SPENT LOTS OF MONEY TO BUY THIS PHONE.
800$ ON THIS PHONE. PLEASE PLEASE HELP.
THANKS FOR READING THIS THREAD AND THANKS A BUNCH IF U HELP ME HERE.
:

Hello guys!! Please reply>>>>> i really need to fix this problem real fast> please please>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

iyash said:
HELLO EVERY ONE. I AM REALLY IN BIG TROUBLE. ALL THIS HAPPENED AFTER WHEN I DOWNLOADED A TOOL FROM THE INTERNET EXPLORER. AFTER IT DOWNLOADED THE PHONE FROZE. AND SO I TOOK OF THE BATTERY FOR 3 SECONDS AND PUT IT BACK AGAIN. AND THEN PRESSED THE POWER ON BUTTON. THEN IT LOADS THE HTC BOOTING SCREEN AND WONT PASS IT. PLEASE HELP ME.
I AM USING WINDOWS XP SP2.
*WHEN I GO TO BOOT LOADER MODE HERE IS THE INFORMATION IT GIVES:
_________________
PB1100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x40
___________________
THAT ALL THE INFORMATION IT GIVES.
HERE ARE THE THINGS I HAVE DONE:
1) I TRIED A SOFT RESET.
2) I TRIED A HARD RESET USING BUTTONS.
3) I TRIED TO CONNECT IT TO THE COMPUTER VIA USB BUT IT DOSE NOT RECOGNIZE OR LAUNCH THE ACTIVE SYNC SINCE IT DOSE NOT BOOT PASS THAT HTC LOGO WHICH IS IN WHITE COLOR.
4) SO I WENT TO BOOTLOADER MODE AND CONNECTED VIA USB. BUT STILL THE ACTIVE SYNC DOSE NOT WORK.
5)SINCE IT IS CONNECTED NOW I RUN THE APLICATION HSPL.EXE BUT IT SAYS THAT I NEED SPL VERSION 1.42.000 SOME THING WHEN I ALREADY HAVE IT I THINK.
6) THEN I TRIED TO INSTALL TOM_LEO_RADIO_2.SOMETHING ITO IT USING THE UPDATEUTILITY.EXE IN THE FOLDER. UPDATE COMPLETED. SO I PRESSED THE POWER BUTTON AGAIN. BUT IT STILL DOSE NOT BOOT PAST HTC LOGO SCREEN.
7)I TRIED TO FLASH A CUSTOM ROM USING BOTH METHODS :
A) BY USING THE USB METHOD.
B)THEN I TRIED USING THE SD CARD METHOD... BUT STILL NO LUCK.
IT STILL DOSE NOT BOOT PAST HTC HD2 LOGO SCREEN.
8) THIS IS THE LAST THING I DID UP UNTIL NOW :
A)CHECKED THIS FORUM
BUT STILL IT DID NOT HELP ME SINCE I DONT KNOW WHAT HE DID TO SOLVE IT.
B) SO I AM FINALLY POSTING THIS NEW THREAD.
PLEASE PLEASE HELP ME SINCE I SPENT LOTS OF MONEY TO BUY THIS PHONE.
800$ ON THIS PHONE. PLEASE PLEASE HELP.
THANKS FOR READING THIS THREAD AND THANKS A BUNCH IF U HELP ME HERE.
:
Click to expand...
Click to collapse
Before I put in my two cents.. A word of advice.. Do not write in Caps.. its as if you are yelling at the person reading..
Now to your problem..
I would suggest..
Do a HSPL to a higher version (Would also advice Task 29 format refer http://forum.xda-developers.com/showthread.php?t=644781)
Install a ROM. and let it boot on its own. Do not press the power button as you mentioned you did..
Let us know..

open active sync (not connected) go to the connections and disable usb connections
put phone in bootloader mode
connect phone to pc phone should say serial then change to usb once connected
if so go ahead use task 29 or mtty then flash a new ROM and a compatible radio
oh yes loose the caps lock matey, and dont leave it 5 mins before replying to you're own post

Hello every one again.First of all I would like to apolojize for writing in capital letters. I didd not know that it was a bad thing to writ in caps. I thought that it would be easier for u guys to read letters since its written in BIG letters. I hope you guys will forgive me =/. Thank you very much for replying and i will try all those methods that you guys have mentioned and i will reply the results as soon as i finish.
Thank you very much again.

could u guys also give me a download link of a good rom. i cant decide which rom to download for me. thank you very much all.

help guys.. where can i download a higher hspl? could u please give me a link.

iyash said:
help guys.. where can i download a higher hspl? could u please give me a link.
Click to expand...
Click to collapse
sorry i did not read all what you did write
http://forum.xda-developers.com/showthread.php?t=611433
and

in my case do i have to install hspl 2 ? and in the forum it says to connect active sync but it dosent cuz my phone is not boot past that white screen.

ok im going to install spl 2.08.0000. is it ok?

done.
now im going to use that task 29 thingy.
thanks guys

when i go into bootlaoder it says
PB01100 HX-BC
SPL-2.08.0000 8G XE
MICROP (LED) 0X05
MICROP(TOUCH) 0X40

right now im downloading the rom and radio from this thread :
http://forum.xda-developers.com/showthread.php?t=688342
but the problem is the download link given in task 29 thread it gives radio version Radio 2.08.50.05+ task29.exe
but in the thread i gave above it says that i need radio version Leo_RADIO_15.39.50.07U_2.10.50.26.rar .
so my question is can i use
Leo_RADIO_15.39.50.07U_2.10.50.26.rar + task29.exe

iyash said:
right now im downloading the rom and radio from this thread :
http://forum.xda-developers.com/showthread.php?t=688342
but the problem is the download link given in task 29 thread it gives radio version Radio 2.08.50.05+ task29.exe
but in the thread i gave above it says that i need radio version Leo_RADIO_15.39.50.07U_2.10.50.26.rar .
so my question is can i use
Leo_RADIO_15.39.50.07U_2.10.50.26.rar + task29.exe
Click to expand...
Click to collapse
Yup.. I dont see a problem.. You can also flash any other radio later on..

Athar Mansoor said:
Yup.. I dont see a problem.. You can also flash any other radio later on..
Click to expand...
Click to collapse
not strictly true, not all radios work with all roms (should you decide to flash a custom rom)
Allways check whcih roms are/are not compatible.

hello i have downloaded task 29 and now i have run the application task29.exe but the problem is that i am getting error [262]. I have followed the instructions it gave me to do for recovery and tried again but i still keep getting the same error. PLEASE HELP. i really need to fix this phone real soon =/

please helppp!!
thank you

solved!
i degraded the hspl version to its intiail: the one i had before.

now im going to install a new rom and let u guys know the results/
thanks all.

done installing task29 : now im going to install the radio version required for the rom i told you guys about! is it ok???

Phone stuck at white screen with HTC

Hi there,
I really need help!
I wanted to flash my phone with a nbh file, but I could not enter my bootloader.
I had installed HSPL3.
Now someone told me to use Flashaholic ROM update utility.
I did this, and a black screen with a % indicator appeared, not too long, it restarted, and went into a white screen with htc in the middle.
Restarting with volume down button pushed doesnt bring me into bootloader.
What can I do now?
I really need help!

Unfortunately, if you can't get your HD2 to boot into the bootloader, there's not much to be done.
Are you sure you had HSPL installed? Because from what I have heard, HSPL is there to always allow you to use it for flashing stuff, regardless of the integrity of other software parts such as the radio or the ROM, so reaching the bootloader should not be a problem for anyone.
Can you connect it to your PC via USB? If you manage to get a connection, you might just have a chance to flash another radio/ROM.

anrabi4 said:
Unfortunately, if you can't get your HD2 to boot into the bootloader, there's not much to be done.
Are you sure you had HSPL installed? Because from what I have heard, HSPL is there to always allow you to use it for flashing stuff, regardless of the integrity of other software parts such as the radio or the ROM, so reaching the bootloader should not be a problem for anyone.
Can you connect it to your PC via USB? If you manage to get a connection, you might just have a chance to flash another radio/ROM.
Click to expand...
Click to collapse
I installed HSPL3, and it said it was succesfull so...
After that I installed a custom rom with an utility that came with it (Dutty's)
So far I know, I cannot get any connection, but I try to download a stock rom (an utility exe) from HTC.com.
But I think this won't work right? because you have to sync.

You could try and flash a stock ROM via the SD Card, see if that works. There are some instructions here on XDA in the ROM Development section, check it out there.
Basically, once you have downloaded an official ROM from htc.com, extract it as if it were an archive and get the ruu_signed.nbh. Rename it to LEOIMG.nbh. Then take your SD Card, format it to FAT32, place the LEOIMG.nbh on the card and put it in your phone. While holding down the volume down button, boot the phone and a white Loading... screen should appear and the flashing process should begin.
I`m afraid this won't work either, as the bootloader is supposed to show up in order for you to be able to flash anything, but it's better than doing nothing, so...

anrabi4 said:
You could try and flash a stock ROM via the SD Card, see if that works. There are some instructions here on XDA in the ROM Development section, check it out there.
Basically, once you have downloaded an official ROM from htc.com, extract it as if it were an archive and get the ruu_signed.nbh. Rename it to LEOIMG.nbh. Then take your SD Card, format it to FAT32, place the LEOIMG.nbh on the card and put it in your phone. While holding down the volume down button, boot the phone and a white Loading... screen should appear and the flashing process should begin.
I`m afraid this won't work either, as the bootloader is supposed to show up in order for you to be able to flash anything, but it's better than doing nothing, so...
Click to expand...
Click to collapse
Does not work, still hangs in htc bootscreen.
What I have to do now? =(
I hope you have any more suggestions for me.
I will read it within 20 min, because I have to go soon for 20 min.
I really need my phone fixed =(

Hi, if I remember correctly, you already said in the Artemis-thread, that the VOL DOWN button is broken. If this is the case, I fear there is not much you can do...

Have the same problem too.
I've installed a few roms with no worries, tried one about an hour ago that performs a Task 29 and i'm also now stuck at the white HTC screen...
it says the task29 was succesfull and then got stuck on the white HTC screen and the rom failed to load as the laptop did not detect a usb connection...
I've downloaded a stock rom and put it on the SD card named LEOIMG.nbh and tried pressing the vol down button, the Red,green,blue,white screen appears i can see
PB81100 HX-BC
SPL 2.08.Hspl 8g XE
0x05
CotullaHSPL 0x30
Then "serial" at the bottom or if i have the phone connected to the pc then "USB" appears.
If i hold both buttons and perform a Hard reset the phone asks to press Vol up button then says restored really quickly then freezes at the white HTC screen..
Any suggestions
Cheers

Actually got it sorted now, the rom had the Flashaholic utility built in which i haven't used before.
As we speak the rom is now installing phew (stop sweating now)...
Thought i had bricked it...

MaxKaul said:
Hi, if I remember correctly, you already said in the Artemis-thread, that the VOL DOWN button is broken. If this is the case, I fear there is not much you can do...
Click to expand...
Click to collapse
It's not broken, it just worked before I did the task29.
The phone is empty, and has no bootloader, and no ROM.

wakers said:
Have the same problem too.
I've installed a few roms with no worries, tried one about an hour ago that performs a Task 29 and i'm also now stuck at the white HTC screen...
it says the task29 was succesfull and then got stuck on the white HTC screen and the rom failed to load as the laptop did not detect a usb connection...
I've downloaded a stock rom and put it on the SD card named LEOIMG.nbh and tried pressing the vol down button, the Red,green,blue,white screen appears i can see
PB81100 HX-BC
SPL 2.08.Hspl 8g XE
0x05
CotullaHSPL 0x30
Then "serial" at the bottom or if i have the phone connected to the pc then "USB" appears.
If i hold both buttons and perform a Hard reset the phone asks to press Vol up button then says restored really quickly then freezes at the white HTC screen..
Any suggestions
Cheers
Click to expand...
Click to collapse
task29 DELETES the ROM. You NEED to install a ROM. A Radio-ROM should be installed automatically with task29. If this isn't the case, you need to install a Radio-ROM too. You can either install the HTC ROM or you can install a custom ROM like forum.xda-developers.com/showthread.php?t=612580
Suggestion: Enter bootloader -> connect USB -> install ROM with CustomRUU

MaxKaul said:
task29 DELETES the ROM. You NEED to install a ROM. A Radio-ROM should be installed automatically with task29. If this isn't the case, you need to install a Radio-ROM too. You can either install the HTC ROM or you can install a custom ROM like forum.xda-developers.com/showthread.php?t=612580
Suggestion: Enter bootloader -> connect USB -> install ROM with CustomRUU
Click to expand...
Click to collapse
Do I have to repeat it again? there is NO BOOTLOADER

joshoon said:
Do I have to repeat it again? there is NO BOOTLOADER
Click to expand...
Click to collapse
If you'd read the entire post, you'd notice, that I quoted the user "wakers", who seems to be able to enter bootloader.

MaxKaul said:
If you'd read the entire post, you'd notice, that I quoted the user "wakers", who seems to be able to enter bootloader.
Click to expand...
Click to collapse
Well im not able to.
I did a HSPL before then I putted a custom ROM Dutty's on the device.
After that I putten a Stock ROM on it again, and then I used Flashaholic, and after task29 it got stuck.

Well no bootloader means no HSPL which is good news for your warranty coverage..
Just go to HTC service and play dumb " uhm i was playing around websites with a flash game and uhm my phone uhm rebooted and is like stuck ever since in uhm HTC logo"
Now if the case for not being able to load the bootloader is a broken volumedown button, yeah ur pretty screwed, prepare to dive in ur wallet.

Were do you live? If you need help and there's one living nereby maybe we can help (p.e. a full battery) I live in the eastern part of the Netherlands (Overijssel) PM me if you can come.

On the Kaiser (my previous phone) I also had a problem I couldn't enter the bootloader anymore, but I can't remember why or what I did to recover it.
- If it was an allmost empty battery and recharged it?
- If I have used a special tool to connect?
I really can't remember.
If I read your story, I think you have loaded a corrupted NBH thru SDCard method, otherwise i think you cannot wipe your bootloader. Task29 only wipes the ROM area not the bootloader.
Have you tried to contact Bepe or Cotulla, cause i think they know everything about (H)SPL.
Otherwise you can start building a new house (you've got your first brick )

have you checked you battery connections, the middle one is notorious for getting bent out of shape at which point the battery will not charge and you can't flash you ROM.

chris2busy said:
Well no bootloader means no HSPL which is good news for your warranty coverage..
Just go to HTC service and play dumb " uhm i was playing around websites with a flash game and uhm my phone uhm rebooted and is like stuck ever since in uhm HTC logo"
Now if the case for not being able to load the bootloader is a broken volumedown button, yeah ur pretty screwed, prepare to dive in ur wallet.
Click to expand...
Click to collapse
I'm 100% sure it's not the volumebutton, and yes Im gonna play a bit dumb ofc, but I already have another story.
henk-jan said:
Were do you live? If you need help and there's one living nereby maybe we can help (p.e. a full battery) I live in the eastern part of the Netherlands (Overijssel) PM me if you can come.
Click to expand...
Click to collapse
It's costs a lot for a trip to there.
Btw, I tried a full battery too, didn't work. (I have two)
webpatrick said:
On the Kaiser (my previous phone) I also had a problem I couldn't enter the bootloader anymore, but I can't remember why or what I did to recover it.
- If it was an allmost empty battery and recharged it?
- If I have used a special tool to connect?
I really can't remember.
If I read your story, I think you have loaded a corrupted NBH thru SDCard method, otherwise i think you cannot wipe your bootloader. Task29 only wipes the ROM area not the bootloader.
Have you tried to contact Bepe or Cotulla, cause i think they know everything about (H)SPL.
Otherwise you can start building a new house (you've got your first brick )
Click to expand...
Click to collapse
I think it's bricked man, my bro is looking for the papers soon, and then im going to the KPN shop (the provider), because the phone has been ordered from there.
nrfitchett4 said:
have you checked you battery connections, the middle one is notorious for getting bent out of shape at which point the battery will not charge and you can't flash you ROM.
Click to expand...
Click to collapse
All the connections look fine.

[Q] HELP!!! I might have bricked this phone trying to flash a stock rom via SD

Hi all,
I would really appreciate if someone can help me reverse this process. I have an HD2 that i need to restore it back to factory ROM/condition and return it to US T-Mobile. I previously have WP7 on nand, Android on SD, Radio 2.15, with Mgldr 1.13 with HSPL 3.
I followed the procedure for flashing through SD as it will remove the HSPL. So i downloaded the ROM from TmoUS website, renamed the file to LEOIMG.nbh, and put it on a 4gb class 2 (FAT32) card. Enter bootloader mode by holding down volume/power button. Then it said loading and ask if I want to write over the image, select yes ... then it start the process. Though, half way through i receive the error message! Now when i turn the phone on i can't get past the bootloader mode. Just the error message even when I try to flash again via SD (the process doesnt even start - just said "loading" then "not allow" error message). When i get it plugged in to flash via desktop, the device is not recognized by the update utility. I'm not sure what could have gone wrong .. but any help or tips to reverse this process is greatly appreciated.
Thanks guys!!

What does it say in bootloader now?

If i just power it on I get the blank screen that said "error installing rom" with the triangle and the exclamation mark in the middle. If I boot into bootloader mode it will first get to the screen where it said "loading" then shortly it will say "error" and "not allow" then take me back to the bootloader mode. though, I noticed that the SPL is now 3.03 instead of 2.08 .. but other than that, I couldnt find a way to flash it by SD or USB. Any suggestion on this? Thanks for your help Macgnolia!

Sounds like it flashed the correct SPL and may be failing on the ROM flash, it sounds like it may be flashing the correct radio too.
What I would do is keep your phone completely off for about 3 hours, then turn it back on into bootloader, then try the flash again.
It might have some random overheat thing going on or something. Since you're back to stock SPL, go ahead and flash via RUU instead of SD and see if that does anything, it should let you since it's a stock ROM you're flashing.

Yeah I am with Orangekid here it might help to let your HD2 rest for a while so the internal temp is reduced as it my be some kind of freak heat issue right now. The HD2 hates heat incase you did not know this. I would still like to know what the top line of your bootloader says so we will know if you have the right device I.D. and that you are not one of the unlucky people to get a their device I.D. mysteriously screwed up by a stock ROM flash.

I'm at work and can't really play with it but definitely I will try it again jz to see if its the heat issue. Also, you think it could be the issue with the card by any chance? I was reading on flashing with SD and there were some conflicting opinions about the class and format for SD. And this is my wifes hd2 .. she'll probably freak out .. hehehe ... Thanks guys '-)
Sent from my HTC HD2 using XDA App

qdochemistry said:
I'm at work and can't really play with it but definitely I will try it again jz to see if its the heat issue. Also, you think it could be the issue with the card by any chance? I was reading on flashing with SD and there were some conflicting opinions about the class and format for SD. And this is my wifes hd2 .. she'll probably freak out .. hehehe ... Thanks guys '-)
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
card shouldn't matter as long as it's 8gb or less from my experience. Once it's off for a few hours just try to reflash stock via RUU and see what happens.
And yeah, go ahead and load up bootloader first to see what the top line says.

I just tested it again .. same problem! at the top right corner it says "RUUNBH" then the series of lines in the red portion of the screen as follows:
PB81120 SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
and if I just power it on it goes to the error message .. then "loading" screen .. then "error" .. then "not allow" .. then back to bootloader mode but the third line now say MicroP-Wrong Platform (0x0)
any suggestion guys??

I thought it might have been that the download rom was corrupted .. went to tmo and download another one .. I tried to flash again .. get from bootloader mode .. then to loading mode .. and just stuck there ..

qdochemistry said:
I thought it might have been that the download rom was corrupted .. went to tmo and download another one .. I tried to flash again .. get from bootloader mode .. then to loading mode .. and just stuck there ..
Click to expand...
Click to collapse
Have you try with different micro sd card?
battery pin check, whether it is bent.
Battery capacity should at least 50%
Did you rename the RUU_signed.nbh to leoimg.nbh?
When you transfer it to sd card, did you using card reader?
Anything is possible. Please take a look of the above check list

I'd be tempted to try a full change of spl, use hspl4 to drop spl from 3.03.0000 down to 2.08.0000 or 2.10.0000, then try first the 2.13 rom and then the 3.14 rom over USB again.

samsamuel said:
I'd be tempted to try a full change of spl, use hspl4 to drop spl from 3.03.0000 down to 2.08.0000 or 2.10.0000, then try first the 2.13 rom and then the 3.14 rom over USB again.
Click to expand...
Click to collapse
Done!! THANK YOU!!!!!
For some odd reasons, my laptop (win7 ultimate) always seems to have connection issues even with chevron for wp7. I plugged it in to my wife's laptop (vista ultimate) and it connects. I was reading your comment on a similar issue in another thread and along with your suggestion here .. I figured it must be HSPL issue. I first used HSPL4 to reinstall 2.08 and immediately mgldr popped up. Then i flash the Tmo stock ROM over it. Then use HSPL4 to flash over (twice) with 3.03 (the one without the HSPL).
It took away the Energy boot screen, now I'm on 3.14 with 2.15 radio. I checked bootloader and it saids the following:
PB81120 SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Which is a problem because I checked on the refurbished device they sent and it has SPL 2.10. And so, I put HSPL 3.03 back on there to flash via SD again. Now i run into the same problem I orginally did .. about 20% into the update process and it stops and said update error. Could this be something obvious that I'm doing wrong? and also is there a way to get spl 2.10 without SD flash??
Thanks bud
Edit: I did it again a couple times via SD and it worked! I checked bootloader and it said spl 2.10 so I guess everything is back to stock now. I guess I'm gonna throw it back in the box and send it off. Thank you everyone for the fast reply and for all the help on this issue ... you guys are awesome! Thanks

[Q] Help! Spoiled hd2. Cannot do anything at all.

I have a 512mb hd2 and today, when i reboot my phone, magldr shows fatal hit 1 and it wont boot into android or enter cwm.
Therefore, i did a task29 and flashed a stock winmo rom using usb cable. However it wont boot into winmo. It shows the htc logo and it stucks there. Sometimes it show htc logo with rgb at the bottom and it will stuck there. I never get into winmo.
Then i tried flashing the stock winmo rom using the sd card method. However, when the phone say that the process is finished, i plugged out the battery. i didnt know that i have to press the red button.
Now, the phone will only boot into the tri coloured screen and the screen shows this:
e??????u HX-BC
(upside down "e" followed by some unknown and indescribable characters followed by a "u")
SPL-142.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
I cannot do anything else. I can't flash anything at all. It will end up in an error.
When i try to flash stock winmo rom using sd card, it will say loading... , then it will say checking... then this red numbers: 0058002 will appear on top then it will go back to the tri coloured screen again.
When can i do?

corrupted modelID, (the e??????u HX-BC bit)
I think JTAG is the only way out, and i've not actually seen hard confirmation that JTAG will fix it. there certainly isn't any flashing solution that i've seen, and we've seen this problem a fair few times.
Unlucky. Got warranty?

yes, its still under warranty. Would the warranty be void?

munchyzoo said:
yes, its still under warranty. Would the warranty be void?
Click to expand...
Click to collapse
Hi,
Unless you can flash an original WM ROM,warranty will be void.
You need to revert back to orginal... HSPL is a hack and your warranty is void.
Go to HTC site>support>download>ROM upgrade and choose appropriate ROM upgrade for your phone
Extract with winrar or 7z the RUU_Leo_HTC_****************************_Ship.exe
find the larger *.nbh file and rename it to leoimg.nbh and place this file on an sd card that is 4gb or less
and reboot to bootloader (the one with 4 colors,hold volume down button)
follow the instructions from there
That way you will have your original software with SPL restored and ready to send it for repair
No need for PC drivers etc.

Don't panic, faced this situation before.. create a goldcard .. follow this thread

Really? Goldcard ignores modelid? You sure? Cos that would imply that you could use a hd2 Goldcard to flash any winmo rom to any winmo phone, which you can't. I'll be interested in anyone confirming absolutely that a phone with a corrupted modelid in bootloader can be flashed from Goldcard.
@op. Yes warranty is valid If your boooader shows a valid spl, ending 0000,because you tell them you woke up and it was on the charger, hot, and in bootloader, screen on, that top line looks wrong, you tried to flash the stock rom but it fails. So long as the spl is good is usually enough for warranty.

Yes with goldcard you can put any HD2 rom on any HD2 phone, debrand .. make it chinese or whatever.

And that's my slightly sarcastic point,,,,, if the modelid is corrupt the Goldcard won't recognise it as a hd2.

munchyzoo said:
Now, the phone will only boot into the tri coloured screen and the screen shows this:
e??????u HX-BC
(upside down "e" followed by some unknown and indescribable characters followed by a "u")
SPL-142.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
When can i do?
Click to expand...
Click to collapse
I saw on the bottom Mr Samsamuel is here, he point me a lot of help to revive my HD two days ago, now my hd2 is up and running. First you failed with MAGLDR, and you did to revive with stock rom. what stock rom did u use. More info will help many hd2 guru here
I believed before you flash anything (as I understood from own experience) flash HSPL, do task29, flash Radio. Just try and let us know. alert : do not do this on Virtual Machine
I have step by step edited copy tutorial to install cLK on hd2, it also can be use to revive brick hd2 (at some level of brick) PM me I will send by email
let us have coffee

the stock rom I use is hTC_Asia_WWE_1.66.707.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
but the problem is I can't do anything with my phone at all. i can't flash hspl or any rom at all...
Buy anyways i have gotten my phone back from htc and now its working. i am now afraid of installing magldr as i fear the same problem (fatal hit 1) will happen again.
I am now considering the old sd card method of running android.... (i think this is safer)
Not sure if clk would have a similar error or something... i have not try it before.
I have googled the magldr fatal hit 1 error and quite a few people have this problem but i can't seem to find a real solution to it. I remember reading somewhere that someone say it is caused by many bad blocks on nand due to excessive flashing. (not sure what this means and how to deal with it)

Since got back ur live hd2. It will no fun anymore. No singgle software 100% safe or bug free. Clk is almost same with MAG both are boatloader. Your bootloader from htc also not bug free.
Running os from sd card is slow. Its same as ur pc booting from live cd/usbstick or external hdd. That for emergency only, rescuing fail software etc. Just do everything carefully read all instruction asking forum and google. You will safe and have a lot of fun
Sent from my HTC Incredible S using XDA App

T-Mobile USA Stock ROM - Flash THIS If You Want Stock!!!

So with all the horror stories of people bricking their phones flashing some crazy stock ROM with a non-tmous stock ROM I have uploaded the latest stock 3.14 tmous ROM for all tmobile USA users who want to do a warranty claim or flash stock for whatever reason.
If you are going to do a warranty claim just move this file to the root of your SD card (8gb or smaller) and reboot the phone, then flash.
LINK
Make sure to verify the MD5 below:
6DD4ECE6ACEE683FB261A19EA65A24D4

I'm sure this will help lots of people
Sent from my HTC Sensation Z710e using XDA App

elliottg61 said:
I'm sure this will help lots of people
Sent from my HTC Sensation Z710e using XDA App
Click to expand...
Click to collapse
yeah suuure

orangekid said:
So with all the horror stories of people bricking their phones flashing some crazy stock ROM with a non-tmous stock ROM I have uploaded the latest stock 3.14 tmous ROM for all tmobile USA users who want to do a warranty claim or flash stock for whatever reason.
If you are going to do a warranty claim just move this file to the root of your SD card (8gb or smaller) and reboot the phone, then flash.
http://www.multiupload.com/Y62UWPWUUO
Click to expand...
Click to collapse
I really appreciate this, I was trying to restore a friends phone to stock so she could send it in to T-Mobile and had some issues. After I flashed using the stock .exe (RUU_Leo_1_5_TMOUS_3.14.531.0_Radio_15.42.50.09U_2.14.50.04_LEO_1.5_Ship) it got stuck at the three color bootloader screen. Would this .nbh solve this issue as well? Or does it have something to do with the SPL?

It might solve it, try and flash it
Sent from my HTC HD2 using XDA App

Hello,
Thank you for this thread! I've been looking for this rom!
But I need help, I was hoping you could give me some insight on my situation.
I'm trying to restore my phone to send it back to t-mobile. So I downloaded the file and it says LEOIMG.nbh and it's on my downloads. So I copied it to the root(main part) of my SD card. My SD card is the one that came with my HD2, and I used it to install the gingerbread rom in the first place.
Anywho, After that I go back to MGLDR and click on 8. AD Recovery. Then it loads clockworkmod recovery and from there I press install zip from sd card, then choose zip from sd card, and when I do that I see my sd card but I don't see the LEOIMG.nbh file there :/
I don't know what step I messed up on, maybe i'm completely way off.
But if someone could help me I'd really appreciate it. Thanks again..

AD is android, this is windows, you need to select windows flasher. This is not an android flashable zip file.
You need to flash this for windows. not android.

You have to do like I stated in the op, turn off the phone. Hold volume down key while turning it on. Then flash
Sent from my HTC HD2 using XDA App

orangekid said:
You have to do like I stated in the op, turn off the phone. Hold volume down key while turning it on. Then flash
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Hello again,
Okay I just tried holding the volume key down while turning on and it goes to the REDGREENBLUEWHITE screen.
It says
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
I tried doing this many times, I tried doing it holding it down for a while, as well as holding it down til the screen comes up and then letting go.
Nothing works . It just takes it to that screen and that's it. Nothing else.
Could you please explain what I should do next? Thank you very much.. Sorry for your time..

Thank you for this..

Karim_j said:
Hello again,
Okay I just tried holding the volume key down while turning on and it goes to the REDGREENBLUEWHITE screen.
It says
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
I tried doing this many times, I tried doing it holding it down for a while, as well as holding it down til the screen comes up and then letting go.
Nothing works . It just takes it to that screen and that's it. Nothing else.
Could you please explain what I should do next? Thank you very much.. Sorry for your time..
Click to expand...
Click to collapse
Your SD card must be 8gb or less. You using a 16?
Sent from my HTC HD2 using XDA App

Yes does that really make a difference? Even though I emptied out my memory card? It's the only one I have but I can probably get another.
But anywho,
What should happen once I use a smaller memory card and hold down power and volume down? What will it say?

Thank you. If I ever need it, I will have it.

Karim_j said:
Yes does that really make a difference? Even though I emptied out my memory card? It's the only one I have but I can probably get another.
But anywho,
What should happen once I use a smaller memory card and hold down power and volume down? What will it say?
Click to expand...
Click to collapse
It won't flash it unless you use an 8gb or smaller.
It will ask you if you want to flash the ROM...

Did you get it to flash?

I was running into the same issue while trying to flash. I tried it with my 32GB card, then the original 16GB card that it came with, then with an 8GB card I had lying around. I noticed each time that it would show the REDGREENBLUEWHITE screen, then briefly flash 'Loading...' then go back to the RGBW screen. While trying it with the 8GB card, I let go of the VolDown button at the brief 'Loading' screen and then it went into the flash utility, and I noticed that the VolDown button on that screen also cancels the flash process.
Are you seeing the Loading screen? If so, let go of the VolDown button then.

Nvm... I fixed my issue.
I followed your steps, then used this website for flashing info.
----- theunlockr.com/2010/04/22/how-to-get-the-htc-hd2-back-to-stock/
Thanks!!
P.S. Do i need to do anything for my radio?

orangekid said:
It won't flash it unless you use an 8gb or smaller.
It will ask you if you want to flash the ROM...
Click to expand...
Click to collapse
So, I'm also having a problem with this.
I'm using a 2gb card to try to do this.
I get to the tri-color bootloader screen and it just says serial at the bottom and just stops there.
As someone mentioned above, to let go of the volume down button when you get to the loading screen...it doesnt show a loading screen.
Anyone know what I may be doing wrong? Or any other suggestions.
Thanks

goatboy6 said:
So, I'm also having a problem with this.
I'm using a 2gb card to try to do this.
I get to the tri-color bootloader screen and it just says serial at the bottom and just stops there.
As someone mentioned above, to let go of the volume down button when you get to the loading screen...it doesnt show a loading screen.
Anyone know what I may be doing wrong? Or any other suggestions.
Thanks
Click to expand...
Click to collapse
Let go of the vol-down button as soon as you turn on the device and start to see the tri-color screen, THEN it should say "loading"
Make sure the file is called LEOIMG.NBH and make sure it's on the root of your SD
Make sure your SD card is formatted FAT32

orangekid said:
Let go of the vol-down button as soon as you turn on the device and start to see the tri-color screen, THEN it should say "loading"
Make sure the file is called LEOIMG.NBH and make sure it's on the root of your SD
Make sure your SD card is formatted FAT32
Click to expand...
Click to collapse
I've done all of those things, and I just reformatted the card and tried again.
Basically what happens, is the tri-color screen comes on and then the screen flashes and the tri-color screen comes on again and just says Serial at the bottom and it does nothing after that.