Database Users

Big problem with my HD2

I think it's taken a knock and now it won't boot. I just get a white screen. If I try a hard reset it gives me the text that I'll wipe all personal settings etc.
I've flashed to a duttys ROM and a 2.x.50.x radio and I'm on O2. Is there any way I can fix this as I'm guessing the ROm update voided the warrenty. As the Hard reset shows text I can see something is working but even plugging it into my PC via USB gets no response.
If anyone can help it would be a major relief.

Let it do the hard reset and see what happens. So you'll lose what ever MMS/SMS you didn't delete, the programs you have loaded since putting the ROM on, etc etc. Your not going to lose all your numbers unless they are stored on the actual phone and not the SIM card.
You could try doing a task29 on it and see if that helps. As for the warranty being voided it just depends on whether or not it can be wiped and loading with a OEM ROM back onto it with the correct HSPL before sending it back. You haven't bricked it if you can get into bootloader or hard reset.

I have tried the hard reset but no joy. It runs the reset but then on boot back to white screen. I'm not fussed about the contacts etc as it's all backed up. Have removed the SD card too.

Do a task29 on it. Flash a new radio and ROM(would suggest OEM) and then get back to us. Worst case something got knocked loose inside and it needs to go to HTC for repair.

craigpyro said:
I have tried the hard reset but no joy. It runs the reset but then on boot back to white screen. I'm not fussed about the contacts etc as it's all backed up. Have removed the SD card too.
Click to expand...
Click to collapse
i've encountered this lately for some strange reason ( being a flash junky) but found my way out of it.
flash your stock ROM via sdcard method, this will reset the spl to the original. (you can easily flash hspl anyway afterwards when you tire of the stock rom).

Ignore my post below. Have drained the battery overnight and this morning have been able to boot to:
PB81100 HX-BC
SPl-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
SERIAL
From here I'm hopeful I can do something.
_______________________________________________________________________________________________________
Sorry guys - but I don't understand how I am meant to do a task29 or ROM via SD card method when I cannot link by USB/ActiveSync or see anything on the screen.

craigpyro said:
....
Sorry guys - but I don't understand how I am meant to do a task29 or ROM via SD card method when I cannot link by USB/ActiveSync or see anything on the screen.
Click to expand...
Click to collapse
The microSD method does not require your phone to connect to the computer.
Here from the newbie guide to flashing a ROM:
Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
This flashes your phone back to warranty status - it replaces the HardSPL, the ROM and the Radio.
Once your phone is repaired, you can always HardSPL your phone again.

I've tried using the HSPL tool to re-install back to 1.41 and other SPLs. The application says it's successful but when I restart the bootloader still reads:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
have tried Flashing ROMs and running Task29. Everytime the Bootloader switches to the updating progress bar then crashes out to Error [262].
I dont have a card reader to try from the SD card but even if I did I'm starting to feel doubtful.

are you sure, that the radio is compatible with the rom?
i'm pretty sure its the same fail.
DN41

OK - booting from FAT32 formatted microSD.
Stock ROM failed
Radio_2.08.50.05 failed

maybe a corrupt image file ? try downloading another one and see if that helps

I've tried 2 images. They get to different points at the radio install then fail. Try to get another img.

Starting to despair a little now. Trying to get just the radio on to start with.
This radio installs up to 100% (instead of about 20%) then reads:
00018003
LEOIMG.nbh - FAIL
Radio_V2Fail
Update Terminate
UPDATE FAIL
I really am getting desperate now having spent almost all day working on this.

Try using the supplied 2GB microSD card that came with the phone. Sometimes there are problems with using larger cards.

Thanks for the idea however I'm using a spare 1GB.

Silly question, but it is an O2 original ROM (assuming that is what your phone originally had on it) you downloaded and are flashing and not an HTC stock ROM (ie 1.66 WWE)?

I have tried both.

I am on the same issue here. Have read almost anything i could find to fix this. Am able to change spl through hspl2 successfully but showing the same spl 1.42 hspl in bootloader. The thing is only unable to flash radio. I can flash a custom rom with sd card but after flashing when it boot up only a white screen is showing. When i try to install a official stock rom it shows that the radio v2 not installed successfully. So its probably radio problem. Hope some one could help us fix this. I tried installing a radio with the sd card and still gets the radio v2 fail. Tried installing custom rom and radio with the usb but doest go beyond 0% and error shown in the pc. HELP HELP HELP
craigpyro said:
Starting to despair a little now. Trying to get just the radio on to start with.
This radio installs up to 100% (instead of about 20%) then reads:
00018003
LEOIMG.nbh - FAIL
Radio_V2Fail
Update Terminate
UPDATE FAIL
I really am getting desperate now having spent almost all day working on this.
Click to expand...
Click to collapse

With the steps I describe here I was able to recover the device.
http://forum.xda-developers.com/showthread.php?t=668347
But only if you follow the exact steps!
I tried many stock roms first and all were stuck on the radio.
Only the method I describe worked for me.
Good luck.

for you guys across the pond, don't you have to flash a .51 radio, not a .50 that you were using for the custom ROMs?

Sending HD2 in to HTC

I called HTC to get my phone repaired since the touchscreen is unresponsive. I previously had Android installed on my sd card, and energy rom flashed. I recently downloaded the new update for the phone so that energy rom would be gone. Is there anything else I have to do before I send it in? Something to do with the original HSPL or something..
sorry i'm a complete noob at this, please help ]:

funny my t mobile hd2 touch screen stopped working last week also and i have to send it in also.
i have the first revision model with the red reset button and i have been seeing alot of problems on line with these screens. the second gen ones with the yellow reset button have better screens apparently.
you need to remove the hspl and have just the spl on it.

ryennn said:
I called HTC to get my phone repaired since the touchscreen is unresponsive. I previously had Android installed on my sd card, and energy rom flashed. I recently downloaded the new update for the phone so that energy rom would be gone. Is there anything else I have to do before I send it in? Something to do with the original HSPL or something..
sorry i'm a complete noob at this, please help ]:
Click to expand...
Click to collapse
Get a default Stock Rom that's shipped for your Serial number. Put that on the root of your SD card after naming it to leoimg.nbh.
Now run the bootloader with the SD card inserted, and follow the onscreen steps.
(re)flashing to a stock shipped rom will reset everything, i.e: remove HSPL, stock radio, stock rom, etc.

maseo said:
unny my t mobile hd2 touch screen stopped working last week also and i have to send it in also.
i have the first revision model with the red reset button and i have been seeing alot of problems on line with these screens. the second gen ones with the yellow reset button have better screens apparently.
you need to remove the hspl and have just the spl on it.
Click to expand...
Click to collapse
**** !! I have a red reset button .. m i screwed

maseo said:
Get a default Stock Rom that's shipped for your Serial number. Put that on the root of your SD card after naming it to leoimg.nbh.
Now run the bootloader with the SD card inserted, and follow the onscreen steps.
(re)flashing to a stock shipped rom will reset everything, i.e: remove HSPL, stock radio, stock rom, etc.
Click to expand...
Click to collapse
I flashed the old rom, and tried removing HSPL, but i got an error, now all i see is a triangle with an exclamation mark in the middle... when i turn the power on with the volume down button, i get "Upgrade ROM code error Please try again"
I'm planning to ship it within the next hour, do I have to fix this error before shipping? Or would it be fine..because when I turn it on with the volume down button, it says
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
that's default right?

lol i couldn't wait anymore, I mailed it, thanks for your help guys......:\

I cant beieve it, bricked phone?

Ever since I went to wp7 and back to android, my amazing hd2 has never been the same since. For weeks I have had freezing, so wanted to get a clean slate and start over. I did the following
Task29
Magldr 1.3
wanted to install nexushd2 so had to install
CWM_Recovery_for_NexusHD2_135M
it crashed towards the end of the install, ok I try to go back to magldr...but even tho I hold the button I dont get the options. I try it all again...same problem. I heard going back to stock 3.14 will fix most problems...it also hangs but at 8%?
Its now 6am and I need sleep...can anybody help...I really need a phone for tomorrow.
Thanks in advance
PS - Currently
PB81100 HX-BC
SPL-2.08.HSPL 8G EX
0X45
0X40
CotuallaHSPL
RUUNBH
Upgraed ROM code error, Please try again
Is that ok?

I got a quick question, did you reformat your SD card after you removed Windows Phone 7? If not this is probably your pro.lemons as WP7 cormates your card in a funky way so the phone tvinls the SD card is the enternal memory, I forget what it is called. But this is the same in WP7 native devices as they actually use SD card for memory and not enternal chips.
The best way to do this is to either vet an adapter and put your card in a digital camera and format it. Then reformat it again to Fat with your computer. Are you can just use your computer, but I suggest the digital camera as it will 100% remove the funky format.

Go into bootloader and flash a correct stock rom from USB. If it doesn't take confirm it's correct for your phone and try again.

sticking at 8% means a problem with installing the radio.
Put it in a plastic bag and pop it in the fridge for 30 minutes. remove and reflash.
I would recommend extracting the 3.14 installation file (using winrar).
Rename the RUU_signed.nbh to 'LEOIMG.nbh'.
Copy this file into the root of your SD Card, and pop the card in the phone.
Boot the phone whilst holding in the volume down button and let it flash.
If cooling the phone helped, send it back under warranty (you have got rid of HSPL, so all is good now.

I got mircosdhc to usb today, copied LEOIMG.NBH to sd, tried to flash but getting 28002 error not allowed
i then throws me back to spl 1.42
I have tried both 3.14 and 1.66 official roms...both sdflash and romupdateutility.
When I try sdflash with leoimg.nbg it gets to 1% then shuts down.
Is my hd2 dead? it doesnt even get orange led charge :-/
Tri colour screen now says
hx-bc
spl 1.42.0000 xe
micro (led) 0x05
microP(TOUCH) 0X40
Is that ok, I dont remember if being that

update
cant flash radios either, shows the progress bar then restarts.
I tried :
2.15.50.14
Gutted, its my best phone ever

hmm, quite a rash of stuck radios this past week or so, , hardware coming to the end of its flashable life?
@OP, some people are recommending (myself included it seems, by passing it on) chilling the phone in a sealed bag in fridge freezer, no sim no sd, then when its cool, put sd in and try to flash real quick, try a few times, keeping it sealed and cool.
Aparently the theory is that the hardware is overheating, and the cooling lets it work well enough for a little while.
There are one or two what look like success stories, it has to be said, but i wouldn't put a bet on it myself just yet.
Good luck.
(oh and i wouldnt put the phone in the bag in a warm room either, , take it outside for a while first, let it be cool before it goes in teh bag, less chance of condensation.)

It doesnt look good...either get a black screen with a triangle!
or if I get into the tri colour bootloader it says:
upgrade rom code error please try again
everytime i try flash a radio it goes either 0% or 8% reboots phone.
I wish I stayed on sd...never had any problems ever...ever since win7 my phone hasnt been the same.
Any more advice or links would be great, keep em coming. I dont want to give up on my hd2 just yet...Im mean its still (imo) one of the best android phones about

@ samsamuel
I cant flash via sd...keeps giving me
upgrade rom code error please try again
should i change my spl or something? its currently:
hx-bc
spl 1.42.0000 xe
micro (led) 0x05
microP(TOUCH) 0X40
do you know if that is ok?

this might be overstating an obvious that you've thought of, but are you sure you are using the correct stock ROM for your region? Have you tried flashing a custom ROM just to see what happens?

fracmo2000 said:
@ samsamuel
I cant flash via sd...keeps giving me
upgrade rom code error please try again
should i change my spl or something? its currently:
hx-bc
spl 1.42.0000 xe
micro (led) 0x05
microP(TOUCH) 0X40
do you know if that is ok?
Click to expand...
Click to collapse
flash back to hspl 3 and try again,if no succes ur bootloader is damaged and that will be problem

fracmo2000 said:
@ samsamuel
I cant flash via sd...keeps giving me
upgrade rom code error please try again
should i change my spl or something? its currently:
hx-bc
spl 1.42.0000 xe
micro (led) 0x05
microP(TOUCH) 0X40
do you know if that is ok?
Click to expand...
Click to collapse
that would be a stock spl then,, and with the rom update error, that means you have flashed the wrong stock rom from sd card. It has removed hspl, then the flash failed because you had (have) stock 1.42.0000 spl.
enter bootloader - usb - hspl4 - 2.08.hspl HSPL not 0000 - into bootloader again, has the spl changed? if not, then flashing is stuck, and you are in the stuck radio situation, if it HAS changed, now try flashing a rom or radio, , , flash from usb, see what happens.

orangekid said:
this might be overstating an obvious that you've thought of, but are you sure you are using the correct stock ROM for your region? Have you tried flashing a custom ROM just to see what happens?
Click to expand...
Click to collapse
not at all, keep me coming...I honestly dont see any other phone just now that I want (in the uk at least)...maybe the artrix but thats not for a few months...so need to get this baby back working!
I tried both 1.66 and 3.14 wwe (i couldnt see a uk one...
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
Are they ok?

You could go to HTC's website, and search for HD2, and then go to downloads, and try downloading the newest rom that the site offers. You need to enter your serial number which is located under the battery. With some luck you will end up having a shipped rom, which has the same cid as your phone, and you will then be able to flash your phone via usb cable (from the tricolor screen).
If for some reason the HTC website won't accept your srial number, try to select another country from the top right part of the website.
I live in Serbia, and the Serbian HTC page has no rom downloads for HD2, the International page won't accept my serial, but the polish page did accept it. So keep trying, until the webpage accepts your sn.
If you are in no luck, you could try downloading roms from http://www.shipped-roms.com/.
Hope you will succeed in your quest to resurrect your phone.
Best of luck
d3m0n

d3m0n1 said:
You could go to HTC's website, and search for HD2, and then go to downloads, and try downloading the newest rom that the site offers. You need to enter your serial number which is located under the battery. With some luck you will end up having a shipped rom, which has the same cid as your phone, and you will then be able to flash your phone via usb cable (from the tricolor screen).
If for some reason the HTC website won't accept your srial number, try to select another country from the top right part of the website.
I live in Serbia, and the Serbian HTC page has no rom downloads for HD2, the International page won't accept my serial, but the polish page did accept it. So keep trying, until the webpage accepts your sn.
If you are in no luck, you could try downloading roms from http://www.shipped-roms.com/.
Hope you will succeed in your quest to resurrect your phone.
Best of luck
d3m0n
Click to expand...
Click to collapse
Ha, funny you should say mention that about HTCs site...but my S/N didnt work either. I wasnt sure if it was something to do with me/my phone or just the site was rubbish!
Im currently downloading an o2 rom frmo shippedroms (great site, thanks) so all my fingers and toes are crossed.
Funny thing is, I can flash hspl and hspl2, I managed to flash radio but not rom...keeps rebooting.

Did u take out sim and SD and try flashing?

@samsamuel
Well, I managed to get hspl4 on ok (2.08hspl) and then flashed a win6.5 rom it worked...but doesnt boot (stuck at flash screen)
When I downloaded official roms from both htc and shippedroms...they are corrupt. I used winrar, 7zip and tried to just run the packaged exe file...doesnt open.
Can anybody help me test these files and see if its me or have a good office rom they can upload?
@milli
when i managed to get an win6.5 rom flashed, sd was in, sim was out (i used hspl usb flash method)
EDIT - Found some o2 shipped roms on xda...extracted and going to try usb flash via hspl4

well i can flash radios and roms via hspl4 usb flash method AND usb via pc...but still cannot boot. Stuck at inital splash screen.
Any ideas now? We have made progress
edit - i have tried both custom roms and shipped o2 (uk) roms

Did you try hard reset after you'd flashed the rom(s)??

tried it once or twice, but not everytime. redownloading another rom
RUU_Le2_UK_1.43.206.4_Radio_Signed_15.26.50.07U_2.04.50.22_2_Ship_WORKING.exe (191,374 KB)
i hope this works...im getting desperate. Im still unsure at whats went wrong. Is it something wrong with my nand memory?
I can now flash radio, roms but yet cannot boot (Stuck at white htc splash...the red text sometimes appears...sometimes it doesnt).
edit - that rom failed to flash

[Q] HELP!!! I might have bricked this phone trying to flash a stock rom via SD

Hi all,
I would really appreciate if someone can help me reverse this process. I have an HD2 that i need to restore it back to factory ROM/condition and return it to US T-Mobile. I previously have WP7 on nand, Android on SD, Radio 2.15, with Mgldr 1.13 with HSPL 3.
I followed the procedure for flashing through SD as it will remove the HSPL. So i downloaded the ROM from TmoUS website, renamed the file to LEOIMG.nbh, and put it on a 4gb class 2 (FAT32) card. Enter bootloader mode by holding down volume/power button. Then it said loading and ask if I want to write over the image, select yes ... then it start the process. Though, half way through i receive the error message! Now when i turn the phone on i can't get past the bootloader mode. Just the error message even when I try to flash again via SD (the process doesnt even start - just said "loading" then "not allow" error message). When i get it plugged in to flash via desktop, the device is not recognized by the update utility. I'm not sure what could have gone wrong .. but any help or tips to reverse this process is greatly appreciated.
Thanks guys!!

What does it say in bootloader now?

If i just power it on I get the blank screen that said "error installing rom" with the triangle and the exclamation mark in the middle. If I boot into bootloader mode it will first get to the screen where it said "loading" then shortly it will say "error" and "not allow" then take me back to the bootloader mode. though, I noticed that the SPL is now 3.03 instead of 2.08 .. but other than that, I couldnt find a way to flash it by SD or USB. Any suggestion on this? Thanks for your help Macgnolia!

Sounds like it flashed the correct SPL and may be failing on the ROM flash, it sounds like it may be flashing the correct radio too.
What I would do is keep your phone completely off for about 3 hours, then turn it back on into bootloader, then try the flash again.
It might have some random overheat thing going on or something. Since you're back to stock SPL, go ahead and flash via RUU instead of SD and see if that does anything, it should let you since it's a stock ROM you're flashing.

Yeah I am with Orangekid here it might help to let your HD2 rest for a while so the internal temp is reduced as it my be some kind of freak heat issue right now. The HD2 hates heat incase you did not know this. I would still like to know what the top line of your bootloader says so we will know if you have the right device I.D. and that you are not one of the unlucky people to get a their device I.D. mysteriously screwed up by a stock ROM flash.

I'm at work and can't really play with it but definitely I will try it again jz to see if its the heat issue. Also, you think it could be the issue with the card by any chance? I was reading on flashing with SD and there were some conflicting opinions about the class and format for SD. And this is my wifes hd2 .. she'll probably freak out .. hehehe ... Thanks guys '-)
Sent from my HTC HD2 using XDA App

qdochemistry said:
I'm at work and can't really play with it but definitely I will try it again jz to see if its the heat issue. Also, you think it could be the issue with the card by any chance? I was reading on flashing with SD and there were some conflicting opinions about the class and format for SD. And this is my wifes hd2 .. she'll probably freak out .. hehehe ... Thanks guys '-)
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
card shouldn't matter as long as it's 8gb or less from my experience. Once it's off for a few hours just try to reflash stock via RUU and see what happens.
And yeah, go ahead and load up bootloader first to see what the top line says.

I just tested it again .. same problem! at the top right corner it says "RUUNBH" then the series of lines in the red portion of the screen as follows:
PB81120 SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
Please try again
and if I just power it on it goes to the error message .. then "loading" screen .. then "error" .. then "not allow" .. then back to bootloader mode but the third line now say MicroP-Wrong Platform (0x0)
any suggestion guys??

I thought it might have been that the download rom was corrupted .. went to tmo and download another one .. I tried to flash again .. get from bootloader mode .. then to loading mode .. and just stuck there ..

qdochemistry said:
I thought it might have been that the download rom was corrupted .. went to tmo and download another one .. I tried to flash again .. get from bootloader mode .. then to loading mode .. and just stuck there ..
Click to expand...
Click to collapse
Have you try with different micro sd card?
battery pin check, whether it is bent.
Battery capacity should at least 50%
Did you rename the RUU_signed.nbh to leoimg.nbh?
When you transfer it to sd card, did you using card reader?
Anything is possible. Please take a look of the above check list

I'd be tempted to try a full change of spl, use hspl4 to drop spl from 3.03.0000 down to 2.08.0000 or 2.10.0000, then try first the 2.13 rom and then the 3.14 rom over USB again.

samsamuel said:
I'd be tempted to try a full change of spl, use hspl4 to drop spl from 3.03.0000 down to 2.08.0000 or 2.10.0000, then try first the 2.13 rom and then the 3.14 rom over USB again.
Click to expand...
Click to collapse
Done!! THANK YOU!!!!!
For some odd reasons, my laptop (win7 ultimate) always seems to have connection issues even with chevron for wp7. I plugged it in to my wife's laptop (vista ultimate) and it connects. I was reading your comment on a similar issue in another thread and along with your suggestion here .. I figured it must be HSPL issue. I first used HSPL4 to reinstall 2.08 and immediately mgldr popped up. Then i flash the Tmo stock ROM over it. Then use HSPL4 to flash over (twice) with 3.03 (the one without the HSPL).
It took away the Energy boot screen, now I'm on 3.14 with 2.15 radio. I checked bootloader and it saids the following:
PB81120 SS-B3
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Which is a problem because I checked on the refurbished device they sent and it has SPL 2.10. And so, I put HSPL 3.03 back on there to flash via SD again. Now i run into the same problem I orginally did .. about 20% into the update process and it stops and said update error. Could this be something obvious that I'm doing wrong? and also is there a way to get spl 2.10 without SD flash??
Thanks bud
Edit: I did it again a couple times via SD and it worked! I checked bootloader and it said spl 2.10 so I guess everything is back to stock now. I guess I'm gonna throw it back in the box and send it off. Thank you everyone for the fast reply and for all the help on this issue ... you guys are awesome! Thanks

[q] help htc hd2 stuck on bootloader screen

i have spent countless hours on this and still have no idea how to fix it..ive searched many threads but none have helped..
i have a htc hd2 and had it on android NAND and just yesterday booting the windows 7 phone onto it.. after it finished the phone rebooted and was stuck on the maglrd screen where it had usb flasher and tetris and all that.. soon i then realized that the maglrd had to be on version 1.3 in order to put windows 7 on it and i had version 1.1 from when i put android on it.. so it was stuck on that screen.. so then i read from a forum that to unistall maglrd and android NAND download a stock ROM for your device then run the setup while your phone is on the tri-colored bootloader screen.. so i downloaded RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50 .07U_2.08.50.08_2_Ship.exe and ran it while on the boot screen after it finished my phone rebooted but then it booted straight to the bootloader screen.. then i downloaded RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship.exe and tried the same thing but no luck.. im still stuck.. on the screen it says
PB81120 ss-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
maybe that helps.. i dont know what my radio thing is
i admit im a noob i just need HELP

You just got REAL lucky,,, PB81120 is a tmous, right? Red end key green send? Says t mobile below the earpiece?
If yes, then that second rom you flashed is the only non tmous rom that wont DESTROY the phone.
Do NOT flash any more stock roms that don't say TMOUS in the filename.
My suggestion, get tmous 3.14 rom and flash from SD card. Assuming that goes well, then flash hspl magldr etc.

Yeah it's a tmobile phone.. But how can I flash from the sd card when it doesn't even show up on my computer.. I can't select the USB drive mode on my phone for it to pull up on the comp unless there's another program I can use to explore my phone

ah right, no card reader?
well, id get the three shipped tmous roms (2.10 2.13 and 3.14, , you already have the 2.10) and try flashing them again, see if you can get any of them to boot. If you can't id suspect the stuck radio/spl problem, meaning something isn't flashing correctly (usually the radio), but the best way to see this is by sd card flashing, so if you have any access at all to an sd card reader (another phone, perhaps?) then sd card flashing will show you on screen each section as it flashes.
Don't be confused by hspl not being removed after a flash, it won't be. We'll come to that later.
Don't forget you need a 4gb or smaller sd card for flashing.
DO NOT use ANY non tmous stock roms, you will end up with a brick.
EDIT - actually, a good test for the stuck radio/spl problem is to try running hspl3 (or hspl4) and changing the spl to anything other than it currently is (2.08.hspl). If it seems to go OK, but nothing changes in the bootscreen, then that's the problem, but be aware that you could potentially end up with no HSPL installed and no way to re apply it, so if you can get your cands on an sd card reader, go for that first.

thanks i already tried the tmous rom i already had with the 16gb sd card and also an 8gb.. i guess i need to buy another one.. i have a 3.14 rom but its not a tmous one.. where do i go to dowload them?
so first i need to get a 2gb sd card and try flashing with a tmous 2.10, 2.13, or 3.14 ROM before testing the stuck radio/spl problem correct?
maybe im just doing the flashing wrong.. first i extract the file using 7-zip .. then i rename the .nbh file to leoimg.nbh then i copy it to the sd card then unplug and turn on and let it run and press the reset button on the back when its finished.. and it says on the tri-colored screen that my the spl is 2.10.0000 now and underneath it now says MicroP(LED) and MicroP(TOUCH)

You need to use a 4Gb or smaller sd card to flash a rom using the sd card bootloader flashing method. Get your hands on one of those and you'll have no problem flashing a stock TMOUS rom.
Sent from my HTC HD2 using XDA App

qweasdzxcasd said:
maybe im just doing the flashing wrong.. first i extract the file using 7-zip .. then i rename the .nbh file to leoimg.nbh then i copy it to the sd card then unplug and turn on and let it run and press the reset button on the back when its finished.. and it says on the tri-colored screen that my the spl is 2.10.0000 now and underneath it now says MicroP(LED) and MicroP(TOUCH)
Click to expand...
Click to collapse
ok well that all looks ok, and your spl has changed from 2.08.hspl to 2.10.0000 .
Did you take note of the blue writing on the phone screen when you sd card flashed? looking out for ''rsa_radio fail'' or some such)

It says radio v2 ok. rcust ok. Boot loader ok. Splash ok. os ok. Configdata ok. Ruu wallpaper1 ok. Ruu wallpaper2 ok update complete update success .... And it still didn't work with a 2gb micro sd card and a tmous 3.14 rom
and how would I even change my hspl to 3 or 4 if my phone doesn't even show up on the computer.. It wouldn't connect to active sync

what if i plug in my phone and instead of flashing with the sd card just click on RomUtilityUpdate and let it run?

yep do that. You can flash from teh bootloader screen, doesnt have to connect to activesync, so long as it says USB in teh white bit of teh bootloader screen.

it's still not working.. I've tried 2.13 and 2.14 ... I'm about to try 2.10 .. But I doubt it'll work

Nope still nothing..

looks like a warranty issue then (assuming its still under warranty?) at least the spl is now warranty safe.

So what does that mean.. do i take it into the store then an they fix it?
won't they just tell me to go since i tampered with the system?

so long as the spl says 2.xx.0000 (the 0000 is the important bit) and you cant see anything like magldr, , , are there any obvious signs? it doesnt boot does it? (im on my pohone one handed, im not checking back thru the thread )

Right now it's 2.10.0000 an it still doesn't boot

Then there's no way anyone can tell you've been flashing. Anything a tech does to make it work will wipe any evidence.(unless they forensically examined it, which they don't)
Gotta be out of warranty by now tho? And if its a paid repair it doesn't matter if you've been flashing.

Oh i see.. and yes it's out of warranty.. i guess i'll just take it to the store then

They basically said the phone is no more.. but i was just talking it employees at the place so maybe i need to talk to a tech person or something..

bootloader problm
is there any software which can put my hd2 tmus into bootloader...as i cant get into boolder by holding vol down key....wat can ido....