Where do I get it and how to install it? I was running Mirage 7.2 and trying to upgrade to PA. It looks like I have Cyanoboot installed, but I can't get to menu. Can somebody help?
Thanks
lepa71 said:
Where do I get it and how to install it? I was running Mirage 7.2 and trying to upgrade to PA. It looks like I have Cyanoboot installed, but I can't get to menu. Can somebody help?
Thanks
Click to expand...
Click to collapse
It comes with and gets installed with the ROM. And it is just like the earlier bootloader, hold the n key.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
I installed PA 2.99, I can't get to menu by hold the n key.
leapinlar said:
It comes with and gets installed with the ROM. And it is just like the earlier bootloader, hold the n key.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
lepa71 said:
I installed PA 2.99, I can't get to menu by hold the n key.
Click to expand...
Click to collapse
Your n key works, right? And don't press too soon, wait for instructions to do it. It may be corrupted. Reinstall.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
n key does work I just can't get it to show menu. Is there any other way to get to recovery?
leapinlar said:
Your n key works, right? And don't press too soon, wait for instructions to do it. It may be corrupted. Reinstall.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
lepa71 said:
n key does work I just can't get it to show menu. Is there any other way to get to recovery?
Click to expand...
Click to collapse
Yes, but if your n key is not working, I'm not sure this will work. Just hold power and n at the same time while booting. It should go directly to recovery.
You should also be able to boot to recovery from inside CM10 or PA by using the power off menu. After you select reboot, a second menu comes up to ask if normal reboot or reboot to recovery.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Thank you for reply
n key works in rom itself, so I assume it should work when nook starts. When nook starts and push n key, nook displays "loading menu" and that is it.
Any other ideas?
leapinlar said:
Yes, but if your n key is not working, I'm not sure this will work. Just hold power and n at the same time while booting. It should go directly to recovery.
You should also be able to boot to recovery from inside CM10 or PA by using the power off menu. After you select reboot, a second menu comes up to ask if normal reboot or reboot to recovery.
Sent with XDA Premium from my Nook HD+ running CM10 on SD
Click to expand...
Click to collapse
lepa71 said:
Thank you for reply
n key works in rom itself, so I assume it should work when nook starts. When nook starts and push n key, nook displays "loading menu" and that is it.
Any other ideas?
Click to expand...
Click to collapse
Did you try the other method of power and n?
It could be that cyanoboot is corrupted. Reflash the PA rom.
Sent from my Galaxy Tab running Tapatalk
power and n works because I have to do it in order to restart NC. It gets frozen when I try to get to cyanoboot menu.
I installed SCHIZOID and moved from CWM to TWRP recovery and still have issues. Do you think I need to try wiping boot partition? I was going to try in stall CM10.1.
Thanks.
leapinlar said:
Did you try the other method of power and n?
It could be that cyanoboot is corrupted. Reflash the PA rom.
Sent from my Galaxy Tab running Tapatalk
Click to expand...
Click to collapse
lepa71 said:
power and n works because I have to do it in order to restart NC. It gets frozen when I try to get to cyanoboot menu.
I installed SCHIZOID and moved from CWM to TWRP recovery and still have issues. Do you think I need to try wiping boot partition? I was going to try in stall CM10.1.
Thanks.
Click to expand...
Click to collapse
Be very careful about wiping /boot. If you do, be sure to flash a new ROM before you reboot. You can mess yourself up good if you don't. Another thing to try is my partition repairs in my partition thread linked in my signature. But if you do that you lose you media files, so back them up. That will fix boot. Do the 145678 zip.
Sent from my Nook HD+ Running CM10 on SD
Related
Hey,
So I installed Cyanogenmod nightlies from rom manager on my nexus 7 and it downloaded and installed fine, but then the device rebooted and has been stuck on a loop of the cyanogenmod splash screen for a hour or two. What did I do wrong and how can it be fixed?
Thanks
agoramilio said:
Hey,
So I installed Cyanogenmod nightlies from rom manager on my nexus 7 and it downloaded and installed fine, but then the device rebooted and has been stuck on a loop of the cyanogenmod splash screen for a hour or two. What did I do wrong and how can it be fixed?
Thanks
Click to expand...
Click to collapse
Did you wipe data/factory reset from CWM after flashing?
comminus said:
Did you wipe data/factory reset from CWM after flashing?
Click to expand...
Click to collapse
yes
Reboot into recovery and try again.
Billchen0014 said:
Reboot into recovery and try again.
Click to expand...
Click to collapse
when i try reboot,m it just goes to the cyanogenmod splash and loops
agoramilio said:
when i try reboot,m it just goes to the cyanogenmod splash and loops
Click to expand...
Click to collapse
Hold down all three buttons and keep holding them. You should be able to get in to fastboot mode.
comminus said:
Hold down all three buttons and keep holding them. You should be able to get in to fastboot mode.
Click to expand...
Click to collapse
so i think i have a new problem...i managed to reboot and go into recovery, but now its stuck on the Google splash
Did you flash a new ROM for the n7?
Billchen0014 said:
Did you flash a new ROM for the n7?
Click to expand...
Click to collapse
all i did was install rom manager and then install cyanogenmod nightly
agoramilio said:
Hey,
So I installed Cyanogenmod nightlies from rom manager on my nexus 7 and it downloaded and installed fine, but then the device rebooted and has been stuck on a loop of the cyanogenmod splash screen for a hour or two. What did I do wrong and how can it be fixed?
Thanks
Click to expand...
Click to collapse
Which android version are you on? Did you already unlock the bootloader?
Sent from my SAMSUNG-SGH-I747 using xda premium
Apocalypse487 said:
Which android version are you on? Did you already unlock the bootloader?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
jelly bean and no
agoramilio said:
jelly bean and no
Click to expand...
Click to collapse
I think you have unlock the bootloader. I might be wrong, but that’s what I did. I unlocked and rooted my N7. Then I flashed a rom, but I was on 4.1.1 then.
Sent from my SAMSUNG-SGH-I747 using xda premium
dp you have a adb setup or maybe wugs toolkit? Correct me if im wrong but the old bootloader had a bug when manually going into the recovery vai button holding at power up
if you have adb setup try a adb reboot recovery and see if that gets you into clockworkmod/twrp, report back
so i have a new problem....i can boot the nexus 7 into recovery mode, but none of the volume buttons work to change the choice, and the nexus 7 toolkit doesnt see the device
now the screen is going nuts https://dl.dropbox.com/u/3678314/20121017_190402.jpg
I get stuck trying to find any network. The pic I draw below might show you. It just keeping show 'Error' every time I tapped on the on/off button, nothing appears... I have made some efforts to find a solution, but none can help.
chetlaxong said:
I get stuck trying to find any network. The pic I draw below might show you. It just keeping show 'Error' every time I tapped on the on/off button, nothing appears... I have made some efforts to find a solution, but none can help.
Click to expand...
Click to collapse
When you go to settings and device information, does it show a MAC Address?
Sent from my HD+ running CM10 on SD with XDA Premium
MacWIFI is unavailable, even when I use Power + Home(N) + Volume Up buttons or sd card to get Factory Reset the Wifi still doesn't come back:cyclops:
chetlaxong said:
MacWIFI is unavailable, even when I use Power + Home(N) + Volume Up buttons or sd card to get Factory Reset the Wifi still doesn't come back:cyclops:
Click to expand...
Click to collapse
Go to my partition repair thread linked in my signature and flash the repair partition 2 zip. Something may be wrong with partition 2 so it cannot read your MAC Address.
Sent from my HD+ running CM10 on SD with XDA Premium
leapinlar said:
Go to my partition repair thread linked in my signature and flash the repair partition 2 zip. Something may be wrong with partition 2 so it cannot read your MAC Address.
Sent from my HD+ running CM10 on SD with XDA Premium
Click to expand...
Click to collapse
After using your "NookColor-emmc-repair-partition-2.zip", no effect... so I tried "NookColor-emmc-repair-partitions-1-4-5-6-7-8.zip" too. And now I get Cyanoboot everytime I power on... The Factory Reset dosen't work anymore, I can't even know how to turn my Nook Color off. I guess I just made another mess... Could you please help me get back to normal state.
PS: Sorry if I just keep disturbing you.
chetlaxong said:
After using your "NookColor-emmc-repair-partition-2.zip", no effect... so I tried "NookColor-emmc-repair-partitions-1-4-5-6-7-8.zip" too. And now I get Cyanoboot everytime I power on... The Factory Reset dosen't work anymore, I can't even know how to turn my Nook Color off. I guess I just made another mess... Could you please help me get back to normal state.
PS: Sorry if I just keep disturbing you.
Click to expand...
Click to collapse
I don't know what you mean by factory reset. Do you mean the the 8 failed boot reset? That would be gone because you just wiped your device of everything completely. You were only supposed to do the partition 2 repair. Now you need to finish the process and reinstall stock.
Flash the format zip and go to my tips thread linked in my signature and look at item A15. It tells you how to put stock back on the nook.
Sent from my HD+ running CM10 on SD with XDA Premium
I did it Thank you, true savior! :fingers-crossed:
Is there any way to disable or remove Cyanoboot? Seems like a very unnecessary step in the recovery system.
dparrothead1 said:
Is there any way to disable or remove Cyanoboot? Seems like a very unnecessary step in the recovery system.
Click to expand...
Click to collapse
Only if you go back to an old CWM. Eyeballer has a 3.2.0.1 version on his emmc install thread. It just boots to a skull. I have cyanoboot on all my new CWMs. Why is it a problem, it just boots past it?
Sent from my Nook HD+ running CM10.1 on emmc.
When you have to do a home/power to recovery then you have to hold the "n" down to get to a menu to choose a recovery option.....to use an old North Carolina saying....Seems like you got to go around your a-hole to get to your elbow!
All my other devices just go straight to recovery. But, if thats the way it is...then thats way it is....
Funny you should mention eyeballer. I was just going through my root folder on the pc and I still had a 1. something eyeballer zip back from the auto-nooter days.
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
dparrothead1 said:
When you have to do a home/power to recovery then you have to hold the "n" down to get to a menu to choose a recovery option.....to use an old North Carolina saying....Seems like you got to go around your a-hole to get to your elbow!
All my other devices just go straight to recovery. But, if thats the way it is...then thats way it is....
Funny you should mention eyeballer. I was just going through my root folder on the pc and I still had a 1. something eyeballer zip back from the auto-nooter days.
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
Click to expand...
Click to collapse
Since you are talking about recovery on emmc, it uses cyanoboot too. You can substitute the new cyanoboot with an old cyanogen u-boot.bin, (which is where cyanoboot is located), like from a CM7 ROM, but each time you flash a new ROM, the new one gets put back. So I think you are stuck with it.
Sent from my Nook HD+ running CM10.1 on emmc.
Thanks anyway.
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
After I flashed my HD+ to the stock rooted rom I had noticed that my bluetooth keyboard was not compatable with the stock nook OS but worked fine with CM. I stuck the bootable SD in and it would not boot, I thought maybe this might be a problem with the sdcard well 5 sdcards later it still wont boot, this problem did not start until i flashed firmware 2.1.1 rooted on there. Is there anyways to get clockworkmod back on this device? If so is there a link anywhere to a flashable image and the name of the partition I would flash it to. I still see cyanaboot when i boot up but holding the N key to access the menu does nothing either. Thanks in advance
rfrayer said:
After I flashed my HD+ to the stock rooted rom I had noticed that my bluetooth keyboard was not compatable with the stock nook OS but worked fine with CM. I stuck the bootable SD in and it would not boot, I thought maybe this might be a problem with the sdcard well 5 sdcards later it still wont boot, this problem did not start until i flashed firmware 2.1.1 rooted on there. Is there anyways to get clockworkmod back on this device? If so is there a link anywhere to a flashable image and the name of the partition I would flash it to. I still see cyanaboot when i boot up but holding the N key to access the menu does nothing either. Thanks in advance
Click to expand...
Click to collapse
There is no menu in the cyanoboot screen. To reset your device do the 8 failed boot procedure. Just interrupt the boot 8 times in a row by holding the power button until it turns off. On the 9th boot let it complete and it will reset itself to pure stock. Then you can start over.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
There is no menu in the cyanoboot screen. To reset your device do the 8 failed boot procedure. Just interrupt the boot 8 times in a row by holding the power button until it turns off. On the 9th boot let it complete and it will reset itself to pure stock. Then you can start over.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
still wont boot from sdcard
rfrayer said:
still wont boot from sdcard
Click to expand...
Click to collapse
The only way you are going to be able to mod the device any further is to get an SD to boot. Did you try the new procedure in my HD/HD+ CWM thread linked in my signature?
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
The only way you are going to be able to mod the device any further is to get an SD to boot. Did you try the new procedure in my HD/HD+ CWM thread linked in my signature?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Yeah it ended up factory resetting about 3 times and then, by magic, booted into sd.. Thank heavens I thought i was going to be stuck with a useless keyboard
I've messes up my nook in ways i no longer under stand and i wanted to phone if there is an file i can flash to start over to square one, stock rom. i have the cyanboot on it, cmw is no longer there(i messed that up trying to installing semi stock rom) and nothing will flash, i cant tell if im charging it i just plug it in and it stays on the cyanboot screen can someone help? i just wanna start over
Cornbeef3000 said:
I've messes up my nook in ways i no longer under stand and i wanted to phone if there is an file i can flash to start over to square one, stock rom. i have the cyanboot on it, cmw is no longer there(i messed that up trying to installing semi stock rom) and nothing will flash, i cant tell if im charging it i just plug it in and it stays on the cyanboot screen can someone help? i just wanna start over
Click to expand...
Click to collapse
Go to my NC tips thread linked in my signature and make a bootable CWM SD per item A10 and then follow A15 to return to stock.
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
Go to my NC tips thread linked in my signature and make a bootable CWM SD per item A10 and then follow A15 to return to stock.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
I tried that and when i booted up the nook when it was installing rom restore image and it fails
Cornbeef3000 said:
I tried that and when i booted up the nook when it was installing rom restore image and it fails
Click to expand...
Click to collapse
Explain what you mean when you say it fails. And what do you mean rom restore image? You need to be more explicit.
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
Explain what you mean when you say it fails. And what do you mean rom restore image? You need to be more explicit.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
Lets say i boot into cwm/twrp using SD or emmc i cant do a creen install (u know formatting data, cache, ect) and then did its time to install the rom, it installs like normal, no problem whatsoever, then installing g apps, same as before not a single problem or error message, then i reboot, see the cyanboot then its says "loading Emmc" or something close to that then the screen goes black, and stays black. weather 5,10,30 mins, an hour goes by nothing else will show on the screen. i though maybe i didn't format my cache (sometimes that's the problem on other devices in the past from booting) so i boot back into cmw/twrp and format it again, reboot, then after the cyanboot screen complete black screen, but i can run roms off SD fine but i dont like too
YellowCobra said:
Lets say i boot into cwm/twrp using SD or emmc i cant do a creen install (u know formatting data, cache, ect) and then did its time to install the rom, it installs like normal, no problem whatsoever, then installing g apps, same as before not a single problem or error message, then i reboot, see the cyanboot then its says "loading Emmc" or something close to that then the screen goes black, and stays black. weather 5,10,30 mins, an hour goes by nothing else will show on the screen. i though maybe i didn't format my cache (sometimes that's the problem on other devices in the past from booting) so i boot back into cmw/twrp and format it again, reboot, then after the cyanboot screen complete black screen, but i can run roms off SD fine but i dont like too
Click to expand...
Click to collapse
The original question on this thread was how to get stock back. You seem to be trying to put CM on emmc. You might do better putting stock back then try to put CM on it.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
The original question on this thread was how to get stock back. You seem to be trying to put CM on emmc. You might do better putting stock back then try to put CM on it.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Thats what im trying to do, but when i try installing the stock roms, on the "instaling update" screen it says it failed, that that was because i did not have the original files on my nook, so i gave up on that
Troubles going back to stock
leapinlar said:
The original question on this thread was how to get stock back. You seem to be trying to put CM on emmc. You might do better putting stock back then try to put CM on it.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Hi leapinlar,
Sorry to hijack the thread, but I just dusted off my Nook Colour and want to take it back to stock. I followed your tips and used CWM-6.0.1.2-bootable_SD to restore back to nookcolor_1_4_3_signed.
I followed another threads instructions (http://forum.xda-developers.com/showthread.php?t=931720) where it told me to first format data and format system. I then chose the nookcolor_1_4_3_signed to install and rebooted.
I've rebooted a couple of times now and it is stuck on the screen with the n and "Contains reader mobile tech by adobe.."
I then went back into CWM and chose the restore function but i'm getting the same result.
nice-socks said:
Hi leapinlar,
Sorry to hijack the thread, but I just dusted off my Nook Colour and want to take it back to stock. I followed your tips and used CWM-6.0.1.2-bootable_SD to restore back to nookcolor_1_4_3_signed.
I followed another threads instructions (http://forum.xda-developers.com/showthread.php?t=931720) where it told me to first format data and format system. I then chose the nookcolor_1_4_3_signed to install and rebooted.
I've rebooted a couple of times now and it is stuck on the screen with the n and "Contains reader mobile tech by adobe.."
I then went back into CWM and chose the restore function but i'm getting the same result.
Click to expand...
Click to collapse
If you had CM on your NC before trying to go back to stock, you must first use my format zips from my NC Tips thread linked in my signature. Using CWM to format is not enough. Read item A15.
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
If you had CM on your NC before trying to go back to stock, you must first use my format zips from my NC Tips thread linked in my signature. Using CWM to format is not enough. Read item A15.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
Hi leapinlar,
I believe I already stated that I did use your files?
Edit: Sorry, now I see I missed the note about formatting with 5-6-7. I'm not sure what that really means, or how to do it, but i've downloaded it and I'll put it on the SD card and see what I can play around with in CWM.
Edit 2: Got it working! Thanks. Now I just need to figure out how to re-format the SD card so I can use it regularly again.
leapinlar said:
If you had CM on your NC before trying to go back to stock, you must first use my format zips from my NC Tips thread linked in my signature. Using CWM to format is not enough. Read item A15.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
ok i flashed the rom, i boot the nook and i see the words "read forever". then a few seconds later it say "install rom restore image" but it failes
[quote name="leapinlar" post=53764858]If you had CM on your NC before trying to go back to stock, you must first use my format zips from my NC Tips thread linked in my signature. Using CWM to format is not enough. Read item A15.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
ok i flashed the rom, i boot the nook and i see the words "read forever". then a few seconds later it say "install rom restore image" but it failes[/QUOTE]Did you follow all the instructions in A15, including flashing the format 567 zip? That message is from stock recovery.
Sent from my SCH-i705 using XDA Premium HD app