I've messes up my nook in ways i no longer under stand and i wanted to phone if there is an file i can flash to start over to square one, stock rom. i have the cyanboot on it, cmw is no longer there(i messed that up trying to installing semi stock rom) and nothing will flash, i cant tell if im charging it i just plug it in and it stays on the cyanboot screen can someone help? i just wanna start over
Cornbeef3000 said:
I've messes up my nook in ways i no longer under stand and i wanted to phone if there is an file i can flash to start over to square one, stock rom. i have the cyanboot on it, cmw is no longer there(i messed that up trying to installing semi stock rom) and nothing will flash, i cant tell if im charging it i just plug it in and it stays on the cyanboot screen can someone help? i just wanna start over
Click to expand...
Click to collapse
Go to my NC tips thread linked in my signature and make a bootable CWM SD per item A10 and then follow A15 to return to stock.
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
Go to my NC tips thread linked in my signature and make a bootable CWM SD per item A10 and then follow A15 to return to stock.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
I tried that and when i booted up the nook when it was installing rom restore image and it fails
Cornbeef3000 said:
I tried that and when i booted up the nook when it was installing rom restore image and it fails
Click to expand...
Click to collapse
Explain what you mean when you say it fails. And what do you mean rom restore image? You need to be more explicit.
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
Explain what you mean when you say it fails. And what do you mean rom restore image? You need to be more explicit.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
Lets say i boot into cwm/twrp using SD or emmc i cant do a creen install (u know formatting data, cache, ect) and then did its time to install the rom, it installs like normal, no problem whatsoever, then installing g apps, same as before not a single problem or error message, then i reboot, see the cyanboot then its says "loading Emmc" or something close to that then the screen goes black, and stays black. weather 5,10,30 mins, an hour goes by nothing else will show on the screen. i though maybe i didn't format my cache (sometimes that's the problem on other devices in the past from booting) so i boot back into cmw/twrp and format it again, reboot, then after the cyanboot screen complete black screen, but i can run roms off SD fine but i dont like too
YellowCobra said:
Lets say i boot into cwm/twrp using SD or emmc i cant do a creen install (u know formatting data, cache, ect) and then did its time to install the rom, it installs like normal, no problem whatsoever, then installing g apps, same as before not a single problem or error message, then i reboot, see the cyanboot then its says "loading Emmc" or something close to that then the screen goes black, and stays black. weather 5,10,30 mins, an hour goes by nothing else will show on the screen. i though maybe i didn't format my cache (sometimes that's the problem on other devices in the past from booting) so i boot back into cmw/twrp and format it again, reboot, then after the cyanboot screen complete black screen, but i can run roms off SD fine but i dont like too
Click to expand...
Click to collapse
The original question on this thread was how to get stock back. You seem to be trying to put CM on emmc. You might do better putting stock back then try to put CM on it.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
The original question on this thread was how to get stock back. You seem to be trying to put CM on emmc. You might do better putting stock back then try to put CM on it.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Thats what im trying to do, but when i try installing the stock roms, on the "instaling update" screen it says it failed, that that was because i did not have the original files on my nook, so i gave up on that
Troubles going back to stock
leapinlar said:
The original question on this thread was how to get stock back. You seem to be trying to put CM on emmc. You might do better putting stock back then try to put CM on it.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Hi leapinlar,
Sorry to hijack the thread, but I just dusted off my Nook Colour and want to take it back to stock. I followed your tips and used CWM-6.0.1.2-bootable_SD to restore back to nookcolor_1_4_3_signed.
I followed another threads instructions (http://forum.xda-developers.com/showthread.php?t=931720) where it told me to first format data and format system. I then chose the nookcolor_1_4_3_signed to install and rebooted.
I've rebooted a couple of times now and it is stuck on the screen with the n and "Contains reader mobile tech by adobe.."
I then went back into CWM and chose the restore function but i'm getting the same result.
nice-socks said:
Hi leapinlar,
Sorry to hijack the thread, but I just dusted off my Nook Colour and want to take it back to stock. I followed your tips and used CWM-6.0.1.2-bootable_SD to restore back to nookcolor_1_4_3_signed.
I followed another threads instructions (http://forum.xda-developers.com/showthread.php?t=931720) where it told me to first format data and format system. I then chose the nookcolor_1_4_3_signed to install and rebooted.
I've rebooted a couple of times now and it is stuck on the screen with the n and "Contains reader mobile tech by adobe.."
I then went back into CWM and chose the restore function but i'm getting the same result.
Click to expand...
Click to collapse
If you had CM on your NC before trying to go back to stock, you must first use my format zips from my NC Tips thread linked in my signature. Using CWM to format is not enough. Read item A15.
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
If you had CM on your NC before trying to go back to stock, you must first use my format zips from my NC Tips thread linked in my signature. Using CWM to format is not enough. Read item A15.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
Hi leapinlar,
I believe I already stated that I did use your files?
Edit: Sorry, now I see I missed the note about formatting with 5-6-7. I'm not sure what that really means, or how to do it, but i've downloaded it and I'll put it on the SD card and see what I can play around with in CWM.
Edit 2: Got it working! Thanks. Now I just need to figure out how to re-format the SD card so I can use it regularly again.
leapinlar said:
If you had CM on your NC before trying to go back to stock, you must first use my format zips from my NC Tips thread linked in my signature. Using CWM to format is not enough. Read item A15.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
ok i flashed the rom, i boot the nook and i see the words "read forever". then a few seconds later it say "install rom restore image" but it failes
[quote name="leapinlar" post=53764858]If you had CM on your NC before trying to go back to stock, you must first use my format zips from my NC Tips thread linked in my signature. Using CWM to format is not enough. Read item A15.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
ok i flashed the rom, i boot the nook and i see the words "read forever". then a few seconds later it say "install rom restore image" but it failes[/QUOTE]Did you follow all the instructions in A15, including flashing the format 567 zip? That message is from stock recovery.
Sent from my SCH-i705 using XDA Premium HD app
Related
After I flashed my HD+ to the stock rooted rom I had noticed that my bluetooth keyboard was not compatable with the stock nook OS but worked fine with CM. I stuck the bootable SD in and it would not boot, I thought maybe this might be a problem with the sdcard well 5 sdcards later it still wont boot, this problem did not start until i flashed firmware 2.1.1 rooted on there. Is there anyways to get clockworkmod back on this device? If so is there a link anywhere to a flashable image and the name of the partition I would flash it to. I still see cyanaboot when i boot up but holding the N key to access the menu does nothing either. Thanks in advance
rfrayer said:
After I flashed my HD+ to the stock rooted rom I had noticed that my bluetooth keyboard was not compatable with the stock nook OS but worked fine with CM. I stuck the bootable SD in and it would not boot, I thought maybe this might be a problem with the sdcard well 5 sdcards later it still wont boot, this problem did not start until i flashed firmware 2.1.1 rooted on there. Is there anyways to get clockworkmod back on this device? If so is there a link anywhere to a flashable image and the name of the partition I would flash it to. I still see cyanaboot when i boot up but holding the N key to access the menu does nothing either. Thanks in advance
Click to expand...
Click to collapse
There is no menu in the cyanoboot screen. To reset your device do the 8 failed boot procedure. Just interrupt the boot 8 times in a row by holding the power button until it turns off. On the 9th boot let it complete and it will reset itself to pure stock. Then you can start over.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
There is no menu in the cyanoboot screen. To reset your device do the 8 failed boot procedure. Just interrupt the boot 8 times in a row by holding the power button until it turns off. On the 9th boot let it complete and it will reset itself to pure stock. Then you can start over.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
still wont boot from sdcard
rfrayer said:
still wont boot from sdcard
Click to expand...
Click to collapse
The only way you are going to be able to mod the device any further is to get an SD to boot. Did you try the new procedure in my HD/HD+ CWM thread linked in my signature?
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
The only way you are going to be able to mod the device any further is to get an SD to boot. Did you try the new procedure in my HD/HD+ CWM thread linked in my signature?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Yeah it ended up factory resetting about 3 times and then, by magic, booted into sd.. Thank heavens I thought i was going to be stuck with a useless keyboard
When i was installing the new nightly of CM11 on the nook color, i ran into a funny glitch or something along the lines of that. After i installed the new ROM and the rebooted after the 1st screen splash instead of going on into the ROM like normal it takes me back to the recovery, i retried like rebooting 20-30 times but no luck, i tried choosing to boot the ROM but it took me to the recovery, i tried to reinstall the ROM but still the same problem is happening. and clue to whats going on?
YellowCobra said:
When i was installing the new nightly of CM11 on the nook color, i ran into a funny glitch or something along the lines of that. After i installed the new ROM and the rebooted after the 1st screen splash instead of going on into the ROM like normal it takes me back to the recovery, i retried like rebooting 20-30 times but no luck, i tried choosing to boot the ROM but it took me to the recovery, i tried to reinstall the ROM but still the same problem is happening. and clue to whats going on?
Click to expand...
Click to collapse
You are in a recovery bootloop. Go to my NC tips thread linked in my signature and read items A8 and A12.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You are in a recovery bootloop. Go to my NC tips thread linked in my signature and read items A8 and A12.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
I tried it all nothings working
YellowCobra said:
I tried it all nothings working
Click to expand...
Click to collapse
By all, did mean you went to my NC emmc repair thread and ran the repair p2 zip?
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
By all, did mean you went to my NC emmc repair thread and ran the repair p2 zip?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
yea the other zip recovory worked, but the one for p2 gave me status 7 ( i was gonna modify the file but on the page it said not to)
Cornbeef3000 said:
yea the other zip recovory worked, but the one for p2 gave me status 7 ( i was gonna modify the file but on the page it said not to)
Click to expand...
Click to collapse
What did it say before the status 7 error? Did it say assert failed? If so your p3 is corrupted. I may have to make you a custom repair zip. And it also means you cannot run stock anymore.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
What did it say before the status 7 error? Did it say assert failed? If so your p3 is corrupted. I may have to make you a custom repair zip. And it also means you cannot run stock anymore.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
it said "assert failed: mount("ext2", "EMMC", "/dev/block/mmcblk0p3", "/factory") == "/factory"
Cornbeef3000 said:
it said "assert failed: mount("ext2", "EMMC", "/dev/block/mmcblk0p3", "/factory") == "/factory"
Click to expand...
Click to collapse
That means your p3 partition is glitched. There is now no way to retrieve your backed up p2 data. And it will never boot to anything but recovery without valid p2 data. Send me your serial number via PM and I will make you a custom repair zip.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
That means your p3 partition is glitched. There is now no way to retrieve your backed up p2 data. And it will never boot to anything but recovery without valid p2 data. Send me your serial number via PM and I will make you a custom repair zip.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
i dont have the box for it anymore, is there any other place i can get it? i have the nook color running off of sd looking for it
YellowCobra said:
i dont have the box for it anymore, is there any other place i can get it? i have the nook color running off of sd looking for it
Click to expand...
Click to collapse
Look on the inside of the flap for the SD.
Sent from my BN NookHD+ using XDA Premium HD app
Have you looked at your PMs? I have a zip there for you.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Have you looked at your PMs? I have a zip there for you.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
i been a while since i look at this and thanks for your help, but i think i made a mistake. before doing this i tried to go back to stock, and im have a new problem. when you 1st turn the nook i get the cyan universal boot screen but after that the stock nook color rom trys to load and when is says installing 3 secs later is said it failed. i tried to format the system, data, and rom but no luck. i also tried to dity flash cm7-11 and still no luck. if you have any ideas that could help, don't mind shooting them my way.
Cornbeef3000 said:
i been a while since i look at this and thanks for your help, but i think i made a mistake. before doing this i tried to go back to stock, and im have a new problem. when you 1st turn the nook i get the cyan universal boot screen but after that the stock nook color rom trys to load and when is says installing 3 secs later is said it failed. i tried to format the system, data, and rom but no luck. i also tried to dity flash cm7-11 and still no luck. if you have any ideas that could help, don't mind shooting them my way.
Click to expand...
Click to collapse
You said you tried to go back to stock. How did you try that?
That message of 'install failed' is stock recovery. Try doing the 8 failed boot reset. Interrupt the boot 8 times in a row by powering off before the cyanoboot logo finishes. Then on the 9th try, let it finish.
Sent from my BN NookHD+ using XDA Premium HD app
I have a nook color with CM7 (7.2). I want to upgrade to the new 10.2. How ever I seem to be having issues doing so. I tried going into the boot menu and doing the recovery mode but it never works. Sometimes the Barnes and Noble error comes up and asks if I want to restore to factory and even that brings back the old CM7. So can someone please help me either get this thing back to stock B&N so I can root it again fresh, or is there a way to upgrade this I am not getting? I installed the rom on the eMMC.
Thanks for the help. If this doent make sense or you need more info please dont hesitate to ask. My terminology isnt to sharp on this stuff.
canonaac said:
I have a nook color with CM7 (7.2). I want to upgrade to the new 10.2. How ever I seem to be having issues doing so. I tried going into the boot menu and doing the recovery mode but it never works. Sometimes the Barnes and Noble error comes up and asks if I want to restore to factory and even that brings back the old CM7. So can someone please help me either get this thing back to stock B&N so I can root it again fresh, or is there a way to upgrade this I am not getting? I installed the rom on the eMMC.
Thanks for the help. If this doent make sense or you need more info please dont hesitate to ask. My terminology isnt to sharp on this stuff.
Click to expand...
Click to collapse
You probably don't have CWM installed to internal memory. That B&N error is the stock recovery. You must make a bootable CWM SD to get CWM. Go to my NC Tips thread linked in my signature and make one per item A10.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You probably don't have CWM installed to internal memory. That B&N error is the stock recovery. You must make a bootable CWM SD to get CWM. Go to my NC Tips thread linked in my signature and make one per item A10.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Thanks for replying.
I followed the instructions but Im not sure what to do exactly. I used 6.0.1.2 and put the image on the SD card. What do I do from there? Or was I supposed to add more files to the SD?
canonaac said:
Thanks for replying.
I followed the instructions but Im not sure what to do exactly. I used 6.0.1.2 and put the image on the SD card. What do I do from there? Or was I supposed to add more files to the SD?
Click to expand...
Click to collapse
After you make the SD, put the CM zip and gapps zip on the SD and boot to it. Then use the CWM to install zip from SD.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
After you make the SD, put the CM zip and gapps zip on the SD and boot to it. Then use the CWM to install zip from SD.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Hey it worked!
Thank you so much for your time and patience. Your guide was very helpful
:good::good::good::good::good:
all i want is to put gingerbread on my damn nook color. lol. i have tried 3 different times and i get stuck with n screen on boot up. i also have tried 3 different sd cards. i dont know if i am just following out dated instructions or if i have a blue dot nook or some other problem. just frustrated. can someone please point me in the right direction?
scarecrow0529 said:
all i want is to put gingerbread on my damn nook color. lol. i have tried 3 different times and i get stuck with n screen on boot up. i also have tried 3 different sd cards. i dont know if i am just following out dated instructions or if i have a blue dot nook or some other problem. just frustrated. can someone please point me in the right direction?
Click to expand...
Click to collapse
You are not saying how you are trying to install it. To SD or internal memory? You mentioned trying 3 SDs so maybe you are trying to install to SD? If you are, use the guide linked in my signature. If you want to install to internal memory, use this guide:
http://forum.xda-developers.com/showthread.php?t=1030227
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You are not saying how you are trying to install it. To SD or internal memory? You mentioned trying 3 SDs so maybe you are trying to install to SD? If you are, use the guide linked in my signature. If you want to install to internal memory, use this guide:
http://forum.xda-developers.com/showthread.php?t=1030227
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
thanks i am trying to install to internal memory. i will try your guide and let you know. thanks.
i tried that method before and when i try to boot up it gets stuck on the n screen.
scarecrow0529 said:
i tried that method before and when i try to boot up it gets stuck on the n screen.
Click to expand...
Click to collapse
By my guide, what do you mean?
Sent from my BN NookHD+ using XDA Premium HD app
scarecrow0529 said:
i tried that method before and when i try to boot up it gets stuck on the n screen.
Click to expand...
Click to collapse
What is the model number of your Nook? Look on the back by the speaker grill.
hwong96 said:
What is the model number of your Nook? Look on the back by the speaker grill.
Click to expand...
Click to collapse
bnrv200
leapinlar said:
By my guide, what do you mean?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
with the link you posted to eyeballers guide. i did everything it says but when i do the final boot up. the screen says read forever then the n screen.
scarecrow0529 said:
with the link you posted to eyeballers guide. i did everything it says but when i do the final boot up. the screen says read forever then the n screen.
Click to expand...
Click to collapse
You say you are putting gingerbread on there. That is CM7.2 you are using, right?
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
You say you are putting gingerbread on there. That is CM7.2 you are using, right?
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
yes and i have also tried cm10.
scarecrow0529 said:
yes and i have also tried cm10.
Click to expand...
Click to collapse
You might try my partition repair zips from my partition repair thread linked in my signature.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You might try my partition repair zips from my partition repair thread linked in my signature.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
used CWM 3.2.0.1 sdcard image then installed partition repair 1-4-5-6-7-8.zip'. then on reboot cwm-based recovery v5.5.0.4 came up and i tried to choose zip on sd and it said; E: cant mount /sdcard/.
scarecrow0529 said:
used CWM 3.2.0.1 sdcard image then installed partition repair 1-4-5-6-7-8.zip'. then on reboot cwm-based recovery v5.5.0.4 came up and i tried to choose zip on sd and it said; E: cant mount /sdcard/.
Click to expand...
Click to collapse
nevermind i held the power button to reboot and cwm 3201 came back and i successfully used 5678 zip. i was able to put cm7.2 on following the eyeballer guide and all is good. thank you. you are a godsend.
I have a nook color, and I've rooted and reinstalled stock so many times , that
I thought I knew all the tricks. Apparently I didn't! I tried to revert from manual booted back to stock and it would not take.! Long story short I noticed when I went to mounts and storage there was no emmc showing . Have I destroyed my nook color? Is there any way to get it back?
Thanks!!!
Rhonda
Rhonda61 said:
I have a nook color, and I've rooted and reinstalled stock so many times , that
I thought I knew all the tricks. Apparently I didn't! I tried to revert from manual booted back to stock and it would not take.! Long story short I noticed when I went to mounts and storage there was no emmc showing . Have I destroyed my nook color? Is there any way to get it back?
Thanks!!!
Rhonda
Click to expand...
Click to collapse
Go to my NC partition repair thread linked in my signature and try that.
Sent from my SM-T707V using XDA Premium HD app
Thank you !!!! I'll give it a try!
I tried repairing it using your 3 codes. It still boots up to " Read Forever"
And won't go any further. It acts like it's installing the update or installing
Back to the stock, but then it sticks.
I went back and re-read your answer. Am I wrong ? Is this just for if you are
Using an SD card to run your ROM with? You see I accidentally , some how removed
The emmc off of my internal drive... I think? When I put my SD card in to Change ROMs, it has a system , data, cache, sd card, sd-ext, but no emmc?
It acts like its installing the ROMs but you take the so card out and power on, and it
Sticks at Read Forever? I think I've really goofed this time!
Rhonda61 said:
I went back and re-read your answer. Am I wrong ? Is this just for if you are
Using an SD card to run your ROM with? You see I accidentally , some how removed
The emmc off of my internal drive... I think? When I put my SD card in to Change ROMs, it has a system , data, cache, sd card, sd-ext, but no emmc?
It acts like its installing the ROMs but you take the so card out and power on, and it
Sticks at Read Forever? I think I've really goofed this time!
Click to expand...
Click to collapse
"emmc" section on a NC is just where you store media files. It has nothing to do with storing a rom. Did you try to reinstall your stock rom? Look at my NC Tips thread linked in my signature for how to do that. Look at item A15.
And I'm not sure what you mean by installing my 3 codes.
Sent from my SM-T707V using XDA Premium HD app
leapinlar said:
"emtomc" section on a NC is just where you store mediafiles. It has nothing to do with storing a rom. Did you try to reinstall your stock rom? Look at my NC Tips thread linked in my signature for how to do that. Look at item A15.
And I'm not sure what you mean by installing my 3 codes.
Sent from my SM-T707V using XDA Premium HD app
Click to expand...
Click to collapse
Yes, I did try to reinstall the stock and it does nothing. It brings up the words " Read Forever" and and stays there. It won't do anything . As for the 3 codes/files. You told me to t o go to your singnature and download the 3 files in your signature which I did .
I'm still stuck.
Rhonda61 said:
Yes, I did try to reinstall the stock and it does nothing. It brings up the words " Read Forever" and and stays there. It won't do anything . As for the 3 codes/files. You told me to t o go to your singnature and download the 3 files in your signature which I did .
I'm still stuck.
Click to expand...
Click to collapse
I tried once ,ore doing what you told me and now my Nook won't even turn on... C
It is possible that your NC internal memory has become read only. I have seen this happen rarely before. It acts like you are writing to it but nothing sticks. Successfully flashing the repair 14567 zip should have caused it to boot to cwm when you remove the SD. I am afraid your unit is toast.
Sent from my SM-T707V using XDA Premium HD app
leapinlar said:
It is possible that your NC internal memory has become read only. I have seen this happen rarely before. It acts like you are writing to it but nothing sticks. Successfully flashing the repair 14567 zip should have caused it to boot to cwm when you remove the SD. I am afraid your unit is toast.
Sent from my SM-T707V using XDA Premium HD app[/QUOTE
I finally got my NC to come back on by plugging into a computer. SO I can at least get it back on.
Is it still toast?
Click to expand...
Click to collapse
Rhonda61 said:
leapinlar said:
It is possible that your NC internal memory has become read only. I have seen this happen rarely before. It acts like you are writing to it but nothing sticks. Successfully flashing the repair 14567 zip should have caused it to boot to cwm when you remove the SD. I am afraid your unit is toast.
Sent from my SM-T707V using XDA Premium HD app[/QUOTE
I finally got my NC to come back on by plugging into a computer. SO I can at least get it back on.
Is it still toast?
Click to expand...
Click to collapse
Just because it fires up does not mean it will stop being read only, if it is. Unless you can get it to accept my repair zips or a rom, it is toast.
Sent from my SM-T707V using XDA Premium HD app
Click to expand...
Click to collapse
Rhonda61, I just reread your posts again and I am not sure that you flashed my repair zips correctly. Did you go to my repair thread linked in my signature and install (flash) the zips there? If you did, what were the results? When you took the SD out after flashing them, how did the device act?
Sent from my SM-T707V using XDA Premium HD app
leapinlar said:
Rhonda61, I just reread your posts again and I am not sure that you flashed my repair zips correctly. Did you go to my repair thread linked in my signature and install (flash) the zips there? If you did, what were the results? When you took the SD out after flashing them, how did the device act?
Sent from my SM-T707V using XDA Premium HD app
Click to expand...
Click to collapse
I finally got everything to work. I was going to throw the NC away, and decided I would try one more time, and it worked. The results were after I flashed the partition 1,etc... and it would not do anything, until I flashed the partition 2, and still nothing, until I flashed the NC stock update.
BUT.... I just posted a new question, about it will only go to Stock 1.2. It will not let me
put 1.4 NC update on it, nor any of the custom Rom's ? Is there anything more I can do?