I have a nook color, and I've rooted and reinstalled stock so many times , that
I thought I knew all the tricks. Apparently I didn't! I tried to revert from manual booted back to stock and it would not take.! Long story short I noticed when I went to mounts and storage there was no emmc showing . Have I destroyed my nook color? Is there any way to get it back?
Thanks!!!
Rhonda
Rhonda61 said:
I have a nook color, and I've rooted and reinstalled stock so many times , that
I thought I knew all the tricks. Apparently I didn't! I tried to revert from manual booted back to stock and it would not take.! Long story short I noticed when I went to mounts and storage there was no emmc showing . Have I destroyed my nook color? Is there any way to get it back?
Thanks!!!
Rhonda
Click to expand...
Click to collapse
Go to my NC partition repair thread linked in my signature and try that.
Sent from my SM-T707V using XDA Premium HD app
Thank you !!!! I'll give it a try!
I tried repairing it using your 3 codes. It still boots up to " Read Forever"
And won't go any further. It acts like it's installing the update or installing
Back to the stock, but then it sticks.
I went back and re-read your answer. Am I wrong ? Is this just for if you are
Using an SD card to run your ROM with? You see I accidentally , some how removed
The emmc off of my internal drive... I think? When I put my SD card in to Change ROMs, it has a system , data, cache, sd card, sd-ext, but no emmc?
It acts like its installing the ROMs but you take the so card out and power on, and it
Sticks at Read Forever? I think I've really goofed this time!
Rhonda61 said:
I went back and re-read your answer. Am I wrong ? Is this just for if you are
Using an SD card to run your ROM with? You see I accidentally , some how removed
The emmc off of my internal drive... I think? When I put my SD card in to Change ROMs, it has a system , data, cache, sd card, sd-ext, but no emmc?
It acts like its installing the ROMs but you take the so card out and power on, and it
Sticks at Read Forever? I think I've really goofed this time!
Click to expand...
Click to collapse
"emmc" section on a NC is just where you store media files. It has nothing to do with storing a rom. Did you try to reinstall your stock rom? Look at my NC Tips thread linked in my signature for how to do that. Look at item A15.
And I'm not sure what you mean by installing my 3 codes.
Sent from my SM-T707V using XDA Premium HD app
leapinlar said:
"emtomc" section on a NC is just where you store mediafiles. It has nothing to do with storing a rom. Did you try to reinstall your stock rom? Look at my NC Tips thread linked in my signature for how to do that. Look at item A15.
And I'm not sure what you mean by installing my 3 codes.
Sent from my SM-T707V using XDA Premium HD app
Click to expand...
Click to collapse
Yes, I did try to reinstall the stock and it does nothing. It brings up the words " Read Forever" and and stays there. It won't do anything . As for the 3 codes/files. You told me to t o go to your singnature and download the 3 files in your signature which I did .
I'm still stuck.
Rhonda61 said:
Yes, I did try to reinstall the stock and it does nothing. It brings up the words " Read Forever" and and stays there. It won't do anything . As for the 3 codes/files. You told me to t o go to your singnature and download the 3 files in your signature which I did .
I'm still stuck.
Click to expand...
Click to collapse
I tried once ,ore doing what you told me and now my Nook won't even turn on... C
It is possible that your NC internal memory has become read only. I have seen this happen rarely before. It acts like you are writing to it but nothing sticks. Successfully flashing the repair 14567 zip should have caused it to boot to cwm when you remove the SD. I am afraid your unit is toast.
Sent from my SM-T707V using XDA Premium HD app
leapinlar said:
It is possible that your NC internal memory has become read only. I have seen this happen rarely before. It acts like you are writing to it but nothing sticks. Successfully flashing the repair 14567 zip should have caused it to boot to cwm when you remove the SD. I am afraid your unit is toast.
Sent from my SM-T707V using XDA Premium HD app[/QUOTE
I finally got my NC to come back on by plugging into a computer. SO I can at least get it back on.
Is it still toast?
Click to expand...
Click to collapse
Rhonda61 said:
leapinlar said:
It is possible that your NC internal memory has become read only. I have seen this happen rarely before. It acts like you are writing to it but nothing sticks. Successfully flashing the repair 14567 zip should have caused it to boot to cwm when you remove the SD. I am afraid your unit is toast.
Sent from my SM-T707V using XDA Premium HD app[/QUOTE
I finally got my NC to come back on by plugging into a computer. SO I can at least get it back on.
Is it still toast?
Click to expand...
Click to collapse
Just because it fires up does not mean it will stop being read only, if it is. Unless you can get it to accept my repair zips or a rom, it is toast.
Sent from my SM-T707V using XDA Premium HD app
Click to expand...
Click to collapse
Rhonda61, I just reread your posts again and I am not sure that you flashed my repair zips correctly. Did you go to my repair thread linked in my signature and install (flash) the zips there? If you did, what were the results? When you took the SD out after flashing them, how did the device act?
Sent from my SM-T707V using XDA Premium HD app
leapinlar said:
Rhonda61, I just reread your posts again and I am not sure that you flashed my repair zips correctly. Did you go to my repair thread linked in my signature and install (flash) the zips there? If you did, what were the results? When you took the SD out after flashing them, how did the device act?
Sent from my SM-T707V using XDA Premium HD app
Click to expand...
Click to collapse
I finally got everything to work. I was going to throw the NC away, and decided I would try one more time, and it worked. The results were after I flashed the partition 1,etc... and it would not do anything, until I flashed the partition 2, and still nothing, until I flashed the NC stock update.
BUT.... I just posted a new question, about it will only go to Stock 1.2. It will not let me
put 1.4 NC update on it, nor any of the custom Rom's ? Is there anything more I can do?
Related
****. I accidentally clicked the option to partition internal SD card and it screwed up my phone!! Kept booting up in RSD mode so I tried flashing it. It boots but the bottom inch of the screen is misaligned by about a CM or so.
Tried the latest FW and the first to no avail. Redownloaded them and nothing. How can I fix this? Tried formatting internal SD card and going back to factory settings.
I'm in Canada and bought this off someone online so is my Atrix ****ed for good?
How did you do that. Would that work on a 32gb
Sent from my MB860 using XDA App
xraycat79 said:
How did you do that. Would that work on a 32gb
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Sorry but this doesn't help. I noted how it was done. I accidentally partitioned the internal SD card. It was late at night and my contact lenses were bugging out.
Rebooted and it wouldn't boot. Using Droid Explorer to control my phone and trying to see what I can do. I'm thinking I somehow have to repartition the internal SD card so I'm trying to get CWM back on there.
If anyone could help that'd be amazing.
Can anyone help? I tried calling Motorola and they said I can't send it directly from Canada... am I SOL???
Hi,
I did the same thing ... could you fix it?
Your pds partition is messed up, you need to flash the pds partition fix. There's a post in either general or few about the fix
Sent from my MB860 using XDA App
bongd said:
****. I accidentally clicked the option to partition internal SD card and it screwed up my phone!! Kept booting up in RSD mode so I tried flashing it. It boots but the bottom inch of the screen is misaligned by about a CM or so.
Tried the latest FW and the first to no avail. Redownloaded them and nothing. How can I fix this? Tried formatting internal SD card and going back to factory settings.
I'm in Canada and bought this off someone online so is my Atrix ****ed for good?
Click to expand...
Click to collapse
Just google pds partition fix and download for the version of android you are running
Sent from my MB860 using xda premium
i think you shuld tell your version first
and call others to backup their pds
if you can reboot to recovery,you can restore your pds,but maybe you can't make phone calls,as my friend's defy has the same problem,and at last have fixed
chinese with poor english
murphy2122 said:
Your pds partition is messed up, you need to flash the pds partition fix. There's a post in either general or few about the fix
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
that worked, thank you so much!
Excited as all outdoors because it was already rooted. Got home, sat down and went to put in my information, hmmmmmm, I got it from a black guy but there's a asian gmail account. :sirens: Maybe he purchased it from the guy just as I've done. I enter my account info and try to remove his, the apps need his so I cant delete him. Nothing a wipe won't fix right? Wrong. So after reading here a very small amount I realize I may need the original owner's B&N account info to resolve this.
Anyone care to chime in on this before I bother this guy for my money back?
Try to do a full wipe and return to original firmware. Then register an account for BN. Flash to cm7 afterwards. Hopefully it will work.
Sent from my NookColor using Tapatalk
If you use another rom like cm7 you won't have to worry about it. They don't register anything with Barnes and noble.
Sent from my NookColor using XDA Premium App
deezndc said:
Excited as all outdoors because it was already rooted. Got home, sat down and went to put in my information, hmmmmmm, I got it from a black guy but there's a asian gmail account. :sirens: Maybe he purchased it from the guy just as I've done. I enter my account info and try to remove his, the apps need his so I cant delete him. Nothing a wipe won't fix right? Wrong. So after reading here a very small amount I realize I may need the original owner's B&N account info to resolve this.
Anyone care to chime in on this before I bother this guy for my money back?
Click to expand...
Click to collapse
If you are already at CM7 on the NC, then you will have to delete the old gmail and youtube accounts and sign-in to your own gmail and youtube accounts.
I just did a complete wipe of everything (SD card included) and his information disappeared. Thanks for the replies! Now to really dig into this.
Sent from my NookColor using XDA Premium App
How can I determine which method was used to root the Nook?
deezndc said:
How can I determine which method was used to root the Nook?
Click to expand...
Click to collapse
Try to do the 8 failed boots and you shouldn't have to worry about it...
8 failed = system recovery (will take it back to stock)
update to 1.2 if necessary
register with B&N if not going to CM7 (I do it anyway even using CM7)
Root or CM7
Now its how YOU want it... not some asian girl/guy/whatever.
DizzyDen said:
Try to do the 8 failed boots and you shouldn't have to worry about it...
8 failed = system recovery (will take it back to stock)
update to 1.2 if necessary
register with B&N if not going to CM7 (I do it anyway even using CM7)
Root or CM7
Now its how YOU want it... not some asian girl/guy/whatever.
Click to expand...
Click to collapse
What if once I do the system recovery, its already B&N registered? Am I at a lost then?
Sent from my NookColor using XDA Premium App
deezndc said:
What if once I do the system recovery, its already B&N registered? Am I at a lost then?
Sent from my NookColor using XDA Premium App
Click to expand...
Click to collapse
If you are using CM7, the "CyanogenMod 7" logo appears when booted. There is no registration of the NC with CM7. CM7 is not rooting. It is firmware that replaces the B&N firmware.
A rooted NC will initially splash the "Read Forever tm" logo when booted. The older B&N firmware splashed "Touch the Future of Reading" logo, if I remember correctly. A rooted NC is the stock B&N firmware that has been altered to allow (root) access to the Android Market apps and still retain all the original B&N functions/features. A rooted NC does require registering the NC.
If the rooted NC is not registered to your B&N account, then:
1. Touch the "U" with the up-arrow icon, select Settings.
2. In Settings, select Device Info.
3. In Device Info, select Erase & Deregister Device.
4. Touch the Erase & Deregister Device button to start the process.
5. Follow any other instructions to complete the erase and deregister the NC process which may follow.
6. Reboot NC, it should return to stock setup, as when it was new.
7. Follow the instructions and register the device using your own B&N account.
8. Update NC to 1.2.
9. Root NC using ManualNooter 4.6.16. Instructions are here.
10. Enjoy!
I hope this helps.
Thanks for the info Bluepen.....I now have a new issue. Somehow, someway I've managed to be in a boot loop, the funny part is it's flashing between the CM7 splash and ClockworkMod Recovery. I've been searching since last evening to no avail, not one single instance matches this one.
Any help would be greatly appreciated.
I've tried the 8x boot thing, I can't tell if it's even shutting down. Also tried the three finger deal, may need to do more research on that one. I've also formatted my sdcard so basically I'm in route to stock which I don't mind if I can just get there.
Slowly but surely this thing will run like my Shift...!!!!! I got it, basically I'm registered with B&N and on the stock ROM, WHEWWWW!
I went to nookdevs.com ( http://mrm3.net/nook-color-recover-any-bricked-device/ ) along with the help perusing around here I was able to fix.
Cyanogen is up and running again.....
deezndc said:
Slowly but surely this thing will run like my Shift...!!!!! I got it, basically I'm registered with B&N and on the stock ROM, WHEWWWW!
I went to nookdevs.com ( http://mrm3.net/nook-color-recover-any-bricked-device/ ) along with the help perusing around here I was able to fix.
Cyanogen is up and running again.....
Click to expand...
Click to collapse
It is good that your NC is back running CM7!
Are you dual booting from/on emmc or booting from the micro sdHC memory card or have you applied CM7 to emmc overwriting theB&N firmware?
Sent from my NOOKcolor using XDA Premium App
I've overwritten the B&N firmware, so I guess out of those three options it would be the latter.
Sent from my NookColor using XDA Premium App
Congrats. Now overclock the **** out of it =D and install the tegra 2 games.
Sooo....I try to to reboot and I get hung up in Recovery. The only way to reboot is to remove the SD card.
Anyone else experience this?
Sent from my NookColor using XDA Premium App
So amongst all my stupor I realize (after reading so much more) that I need to remove the SD card to boot back into cm7 or stock once I'm done in CWM. What a difference that makes. Smh.
Sent from my NookColor using XDA Premium App
deezndc said:
So amongst all my stupor I realize (after reading so much more) that I need to remove the SD card to boot back into cm7 or stock once I'm done in CWM. What a difference that makes. Smh.
Sent from my NookColor using XDA Premium App
Click to expand...
Click to collapse
Or format the uSD to remove CWM and make it usable to yourCM7 install.
YCGIYWG
Will that allow me to not have to remove it everytime and what are the chances of getting Nook Stock to boot once its formatted?
Sent from my NookColor using XDA Premium App
The reason I ask that is because I've been stuck on the "N" screen several times to no avail.
I have a nook color with CM7 (7.2). I want to upgrade to the new 10.2. How ever I seem to be having issues doing so. I tried going into the boot menu and doing the recovery mode but it never works. Sometimes the Barnes and Noble error comes up and asks if I want to restore to factory and even that brings back the old CM7. So can someone please help me either get this thing back to stock B&N so I can root it again fresh, or is there a way to upgrade this I am not getting? I installed the rom on the eMMC.
Thanks for the help. If this doent make sense or you need more info please dont hesitate to ask. My terminology isnt to sharp on this stuff.
canonaac said:
I have a nook color with CM7 (7.2). I want to upgrade to the new 10.2. How ever I seem to be having issues doing so. I tried going into the boot menu and doing the recovery mode but it never works. Sometimes the Barnes and Noble error comes up and asks if I want to restore to factory and even that brings back the old CM7. So can someone please help me either get this thing back to stock B&N so I can root it again fresh, or is there a way to upgrade this I am not getting? I installed the rom on the eMMC.
Thanks for the help. If this doent make sense or you need more info please dont hesitate to ask. My terminology isnt to sharp on this stuff.
Click to expand...
Click to collapse
You probably don't have CWM installed to internal memory. That B&N error is the stock recovery. You must make a bootable CWM SD to get CWM. Go to my NC Tips thread linked in my signature and make one per item A10.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You probably don't have CWM installed to internal memory. That B&N error is the stock recovery. You must make a bootable CWM SD to get CWM. Go to my NC Tips thread linked in my signature and make one per item A10.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Thanks for replying.
I followed the instructions but Im not sure what to do exactly. I used 6.0.1.2 and put the image on the SD card. What do I do from there? Or was I supposed to add more files to the SD?
canonaac said:
Thanks for replying.
I followed the instructions but Im not sure what to do exactly. I used 6.0.1.2 and put the image on the SD card. What do I do from there? Or was I supposed to add more files to the SD?
Click to expand...
Click to collapse
After you make the SD, put the CM zip and gapps zip on the SD and boot to it. Then use the CWM to install zip from SD.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
After you make the SD, put the CM zip and gapps zip on the SD and boot to it. Then use the CWM to install zip from SD.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Hey it worked!
Thank you so much for your time and patience. Your guide was very helpful
:good::good::good::good::good:
I've messes up my nook in ways i no longer under stand and i wanted to phone if there is an file i can flash to start over to square one, stock rom. i have the cyanboot on it, cmw is no longer there(i messed that up trying to installing semi stock rom) and nothing will flash, i cant tell if im charging it i just plug it in and it stays on the cyanboot screen can someone help? i just wanna start over
Cornbeef3000 said:
I've messes up my nook in ways i no longer under stand and i wanted to phone if there is an file i can flash to start over to square one, stock rom. i have the cyanboot on it, cmw is no longer there(i messed that up trying to installing semi stock rom) and nothing will flash, i cant tell if im charging it i just plug it in and it stays on the cyanboot screen can someone help? i just wanna start over
Click to expand...
Click to collapse
Go to my NC tips thread linked in my signature and make a bootable CWM SD per item A10 and then follow A15 to return to stock.
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
Go to my NC tips thread linked in my signature and make a bootable CWM SD per item A10 and then follow A15 to return to stock.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
I tried that and when i booted up the nook when it was installing rom restore image and it fails
Cornbeef3000 said:
I tried that and when i booted up the nook when it was installing rom restore image and it fails
Click to expand...
Click to collapse
Explain what you mean when you say it fails. And what do you mean rom restore image? You need to be more explicit.
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
Explain what you mean when you say it fails. And what do you mean rom restore image? You need to be more explicit.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
Lets say i boot into cwm/twrp using SD or emmc i cant do a creen install (u know formatting data, cache, ect) and then did its time to install the rom, it installs like normal, no problem whatsoever, then installing g apps, same as before not a single problem or error message, then i reboot, see the cyanboot then its says "loading Emmc" or something close to that then the screen goes black, and stays black. weather 5,10,30 mins, an hour goes by nothing else will show on the screen. i though maybe i didn't format my cache (sometimes that's the problem on other devices in the past from booting) so i boot back into cmw/twrp and format it again, reboot, then after the cyanboot screen complete black screen, but i can run roms off SD fine but i dont like too
YellowCobra said:
Lets say i boot into cwm/twrp using SD or emmc i cant do a creen install (u know formatting data, cache, ect) and then did its time to install the rom, it installs like normal, no problem whatsoever, then installing g apps, same as before not a single problem or error message, then i reboot, see the cyanboot then its says "loading Emmc" or something close to that then the screen goes black, and stays black. weather 5,10,30 mins, an hour goes by nothing else will show on the screen. i though maybe i didn't format my cache (sometimes that's the problem on other devices in the past from booting) so i boot back into cmw/twrp and format it again, reboot, then after the cyanboot screen complete black screen, but i can run roms off SD fine but i dont like too
Click to expand...
Click to collapse
The original question on this thread was how to get stock back. You seem to be trying to put CM on emmc. You might do better putting stock back then try to put CM on it.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
The original question on this thread was how to get stock back. You seem to be trying to put CM on emmc. You might do better putting stock back then try to put CM on it.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Thats what im trying to do, but when i try installing the stock roms, on the "instaling update" screen it says it failed, that that was because i did not have the original files on my nook, so i gave up on that
Troubles going back to stock
leapinlar said:
The original question on this thread was how to get stock back. You seem to be trying to put CM on emmc. You might do better putting stock back then try to put CM on it.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
Hi leapinlar,
Sorry to hijack the thread, but I just dusted off my Nook Colour and want to take it back to stock. I followed your tips and used CWM-6.0.1.2-bootable_SD to restore back to nookcolor_1_4_3_signed.
I followed another threads instructions (http://forum.xda-developers.com/showthread.php?t=931720) where it told me to first format data and format system. I then chose the nookcolor_1_4_3_signed to install and rebooted.
I've rebooted a couple of times now and it is stuck on the screen with the n and "Contains reader mobile tech by adobe.."
I then went back into CWM and chose the restore function but i'm getting the same result.
nice-socks said:
Hi leapinlar,
Sorry to hijack the thread, but I just dusted off my Nook Colour and want to take it back to stock. I followed your tips and used CWM-6.0.1.2-bootable_SD to restore back to nookcolor_1_4_3_signed.
I followed another threads instructions (http://forum.xda-developers.com/showthread.php?t=931720) where it told me to first format data and format system. I then chose the nookcolor_1_4_3_signed to install and rebooted.
I've rebooted a couple of times now and it is stuck on the screen with the n and "Contains reader mobile tech by adobe.."
I then went back into CWM and chose the restore function but i'm getting the same result.
Click to expand...
Click to collapse
If you had CM on your NC before trying to go back to stock, you must first use my format zips from my NC Tips thread linked in my signature. Using CWM to format is not enough. Read item A15.
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
If you had CM on your NC before trying to go back to stock, you must first use my format zips from my NC Tips thread linked in my signature. Using CWM to format is not enough. Read item A15.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
Hi leapinlar,
I believe I already stated that I did use your files?
Edit: Sorry, now I see I missed the note about formatting with 5-6-7. I'm not sure what that really means, or how to do it, but i've downloaded it and I'll put it on the SD card and see what I can play around with in CWM.
Edit 2: Got it working! Thanks. Now I just need to figure out how to re-format the SD card so I can use it regularly again.
leapinlar said:
If you had CM on your NC before trying to go back to stock, you must first use my format zips from my NC Tips thread linked in my signature. Using CWM to format is not enough. Read item A15.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
ok i flashed the rom, i boot the nook and i see the words "read forever". then a few seconds later it say "install rom restore image" but it failes
[quote name="leapinlar" post=53764858]If you had CM on your NC before trying to go back to stock, you must first use my format zips from my NC Tips thread linked in my signature. Using CWM to format is not enough. Read item A15.
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
ok i flashed the rom, i boot the nook and i see the words "read forever". then a few seconds later it say "install rom restore image" but it failes[/QUOTE]Did you follow all the instructions in A15, including flashing the format 567 zip? That message is from stock recovery.
Sent from my SCH-i705 using XDA Premium HD app
all i want is to put gingerbread on my damn nook color. lol. i have tried 3 different times and i get stuck with n screen on boot up. i also have tried 3 different sd cards. i dont know if i am just following out dated instructions or if i have a blue dot nook or some other problem. just frustrated. can someone please point me in the right direction?
scarecrow0529 said:
all i want is to put gingerbread on my damn nook color. lol. i have tried 3 different times and i get stuck with n screen on boot up. i also have tried 3 different sd cards. i dont know if i am just following out dated instructions or if i have a blue dot nook or some other problem. just frustrated. can someone please point me in the right direction?
Click to expand...
Click to collapse
You are not saying how you are trying to install it. To SD or internal memory? You mentioned trying 3 SDs so maybe you are trying to install to SD? If you are, use the guide linked in my signature. If you want to install to internal memory, use this guide:
http://forum.xda-developers.com/showthread.php?t=1030227
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You are not saying how you are trying to install it. To SD or internal memory? You mentioned trying 3 SDs so maybe you are trying to install to SD? If you are, use the guide linked in my signature. If you want to install to internal memory, use this guide:
http://forum.xda-developers.com/showthread.php?t=1030227
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
thanks i am trying to install to internal memory. i will try your guide and let you know. thanks.
i tried that method before and when i try to boot up it gets stuck on the n screen.
scarecrow0529 said:
i tried that method before and when i try to boot up it gets stuck on the n screen.
Click to expand...
Click to collapse
By my guide, what do you mean?
Sent from my BN NookHD+ using XDA Premium HD app
scarecrow0529 said:
i tried that method before and when i try to boot up it gets stuck on the n screen.
Click to expand...
Click to collapse
What is the model number of your Nook? Look on the back by the speaker grill.
hwong96 said:
What is the model number of your Nook? Look on the back by the speaker grill.
Click to expand...
Click to collapse
bnrv200
leapinlar said:
By my guide, what do you mean?
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
with the link you posted to eyeballers guide. i did everything it says but when i do the final boot up. the screen says read forever then the n screen.
scarecrow0529 said:
with the link you posted to eyeballers guide. i did everything it says but when i do the final boot up. the screen says read forever then the n screen.
Click to expand...
Click to collapse
You say you are putting gingerbread on there. That is CM7.2 you are using, right?
Sent from my SCH-i705 using XDA Premium HD app
leapinlar said:
You say you are putting gingerbread on there. That is CM7.2 you are using, right?
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
yes and i have also tried cm10.
scarecrow0529 said:
yes and i have also tried cm10.
Click to expand...
Click to collapse
You might try my partition repair zips from my partition repair thread linked in my signature.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You might try my partition repair zips from my partition repair thread linked in my signature.
Sent from my BN NookHD+ using XDA Premium HD app
Click to expand...
Click to collapse
used CWM 3.2.0.1 sdcard image then installed partition repair 1-4-5-6-7-8.zip'. then on reboot cwm-based recovery v5.5.0.4 came up and i tried to choose zip on sd and it said; E: cant mount /sdcard/.
scarecrow0529 said:
used CWM 3.2.0.1 sdcard image then installed partition repair 1-4-5-6-7-8.zip'. then on reboot cwm-based recovery v5.5.0.4 came up and i tried to choose zip on sd and it said; E: cant mount /sdcard/.
Click to expand...
Click to collapse
nevermind i held the power button to reboot and cwm 3201 came back and i successfully used 5678 zip. i was able to put cm7.2 on following the eyeballer guide and all is good. thank you. you are a godsend.