Database Users

Cracked LED flash lense

Where go i get a replacement for my led flash lense? Unsure how or why but this morning I discover my lense shattered when it was perfectly fine the night before. Possibly heat from aussie summer?
Sent from my HD2 running DesireZ rom using XDA App

Ebay.......

[Q] Red light always on

The notification light has come on on my defy and is ,stuck on red, it got a little damp in some rain, but its got wetter h previously, all the ports have been closed. Any ideas?

It will go off by itself same happen here.
Sent from my MB525 using XDA App

How long did it take for your light to go out? My defy has been showing a dull red glow now for just over a week, and that's regardless of weather our not the phone is on or off, when the phone is powered down the dull red glow is still there.
the only way to stop it is to remove the battery.

Odd. Didn't.notice prob a week.or so. Sorry to hear bout it. Try.leaving the batt off for a few.ours
Sent from my Defy. Using XDA App.

Same thing there
Hi, I got the same problem after a day at the pool with it.. some water but very few entered in, i think its the steam.. how about your phone now ? is it working well ?
Regards

gplock said:
It will go off by itself same happen here.
Sent from my MB525 using XDA App
Click to expand...
Click to collapse
8 months on and the red light is still constantly on, all be it a very dim glow even when the phne is off, it comes on as soon as a battery is inserted. All from dropping the phone into a muddy puddle, with all covers on/sealed.
appart form that all is working well.

2Pints said:
8 months on and the red light is still constantly on, all be it a very dim glow even when the phne is off, it comes on as soon as a battery is inserted. All from dropping the phone into a muddy puddle, with all covers on/sealed.
appart form that all is working well.
Click to expand...
Click to collapse
I`m have the same problem and don`t get solution yet HELP

The light came up again as well n hasn't left. Could B worse.. so sad.
Sent from my MB525 using XDA

Questions go in the Q&A section

May be your proximity sensor is gone
Sent from my MB526 using Tapatalk 2

^ how do I check that. ? Please n thank u.
Sent from my MB525 using XDA

When you do a call, is your screen getting locked and you cant unlock the screen till the call ends
Sent from my MB526 using Tapatalk 2

Nope. None of that.
Sent from my MB525 using XDA

Red lens.

Hey guys! Where can i buy the res lens camera? I am using a green lens. I looked on ebay but couldnt find one.
Sent from my MB525 using XDA App

you cannot buy anywhere...its motorola's factory design / component.

i dun think u can swap the camera on ur defy...

Yes you guys THINK that its not possible, but why not? I don't think that moto changed anything other on the board. But anyway, lets hope that someone gets the module for gb-kernel working
Sent from my MB525 using XDA App

Actually the soc module makes much better pictures then the Bayer one, especially in darker environment...
Sent from my MB525 using XDA App

Really? My understanding was it's the other way around.
I have the SOC camera and to be honest, the camera quality is pretty bad (on latest stable CM7) - especially in low light situations. I can't imagine the Bayer module being worse.

Yes, the soc module is already bad, but with Bayer module its even worse i have made huge testing as my friend bought a defy with Bayer module and i have got a soc one, the result is clear
Sent from my MB525 using xda premium

The camera module it's soldered on the mainboard, too hard to replace.
Sent from my MB525 using Tapatalk

Matze5800 said:
Yes, the soc module is already bad, but with Bayer module its even worse i have made huge testing as my friend bought a defy with Bayer module and i have got a soc one, the result is clear
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
Ah i see, thats why Moto put the Bayer in the Defy+ because it is worse then the SOC they have 2 get rid of the bad ones first. On what did you test the camera difference on the original MOTO Rom or on a custom ROM like CM7??
I think they will not put a worse module in a newer phone.

Well i have tested on cm7, and i think they only used the Bayer module to get the ability of 720p-recording and didn't take any look at the image quality itself well at least that's my theory to explain that bull**** but you are right, it could have also been some issue with cm7 on the bayer-defy. Well, lets hope for a working green lens module for gb kernel
Sent from my MB525 using xda premium

changing the green lens camera with RED lens??

hi there.
i Have a Green lens Soc module defy.
bt i have a source from where i can get a motherboard of red lens defy,
i dont wana change the motherboard itself,as it would change the IMEI nmber as well..
can i change the camera? without changing the motherboard.
i know the red lens would probably have the BAYER module,so would that effect ??

anybody??
is it possible to just change the camera
??

You have to change the motherboard for for a one with Bayer camera module... I guess it's easier to sell the green lense Defy and get another with red lense
Sent from my MB525 using xda app-developers app

yes you can , the camera module is not welded in the motherboard

lexer98 said:
yes you can , the camera module is not welded in the motherboard
Click to expand...
Click to collapse
so if i just take the camera out from the redlens motherboard and put it in mine,mine will become Bayer module?
module will be integrated within the camera itself? and not the motherboard???

there is a defy disassembly video ob YT.
It shows how to replace cam module.
Sent from my MB525 using xda app-developers app

i have searched the whole YT,couldnt find it
all i can c was a full disassembly,screen replacement,speaker replacement,
nothing about the cam.
can u plz give me the link?
hsrars-d said:
there is a defy disassembly video ob YT.
It shows how to replace cam module.
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse

I unmounted the cam of my water death defy ....
My experience was that it should be pulled straight off to don't brick the pins which comes from motherboard , to do with ab special tool easily.
Cam should work fine
But i don't know how to mount again on ab other motherboard ..
I've forgotten to mark the mounting direction....
Cam has a mark motherboard not..
Sent from my MB526 using xda app-developers app

MB526 digitizer on MB525

I have to replace the digitizer on my Moto Defy MB525 but I only found one for the MB526 ..
Would it be compatible along with the face plate ?
Sent virtually over my LG 'Nexus' G