Related
hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Yeh, the Blue Angel is a bit strange with some bluetooth devices.
I have the following issues with WM6 on my BA, which did not exist with 2003SE:
1) When Bluetooth is active, the device turns on by itself every minute or so. I understand that this is a hacked "feature" to prevent the bluetooth from turning itself off. This is probably the most annoying thing about WM5/WM6. Is there any fix I am not aware of?
2) When I start from scratch and pair my carkit (Parrot), everything works OK, except that BA's sound putput, i.e. for Microsoft Voice Command, is coming from the BA instead of the car kit. This is too low a volume, to be clearly understandable in a car. With my Universal (also on WM6) this does not happen.
3) After pairing my Asus GPS, nothing works. If I delete all paired devices and just pair my Asus without being in range of the car kit, it will work. If both devices are turned on (car kit and GPS Receiver), none works properly.
I don't use my BA on a regular basis anymore, because I have my Universal, which works flawless. However, I see no paint in upgrading to WM5/WM6 if one ends up with LESS functionality than the original 2003SE.
The only feature I will be missing is the fact that no RAM memory is used, which means one does not loose everything when the battery drains.
Are there any tips to solve these three problems?
The WLAN "bug" is not really a problem: even with 2003SE I had to occasionaly start and restart the WLAN for it to work properly.
Cheers,
vma
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
problems i still have:
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- how can i find out what BT stack i have?
- i installed that Boradcom stack 1.7 without having any succes in getting my headset to work. with or without patch1 and htcheadset! any ideas?!?
- what excactly is that HTC HEADSET ADDON ?
please answer soon, any help is very much appreciated!!!!
thx in advance,
krz
1. Same here; i think is my hands free set limitation.
2. I get the same using the Broadcomm stack; use the MS stack.
3. Depends; if you use Broadcomm/Widcomm, you have an "about" box; if you use MS, i don't know.
4. i get it working, but with audio in hands free AND speakers; annoying.
5. don't know, try Google.
DANDANA said:
@vma:
1. Well, not at the moment; maybe if someone who can play with the dll's can fix this.
2. I use a Logitech hands-free, and i have no problems.
3. No problem here using a NoBrand BT GPS receiver and the hands-free in the same time.
Overall, my BA work much better on WM6; its just my experience.
Click to expand...
Click to collapse
What Bluetooth Stack you use ?
First, I use the existing MS Stack on Helmi WM6. BT GPS and Handsfree couldn't run at the same time.
Second, I use Broadcomm Stack 1.71. BT GPS and BT Stereo could run at the same time, but Hands-free function didn't run at all.
Give me a light please.
your bluetooth headset
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
shazzy84 said:
A few of your problems could be from the bluetooth headset you are using now-- such as when people can not hear you clearly. I currently have a sound id sm100 bluetooth headset and it works flawlessly....although i still can not activate voice calling from it(it activates it on my BA so i have to talk into my BA and not my headset). It could just be your headset.
Click to expand...
Click to collapse
Yeah, Bluetooth in BA really sux... you have to choose your bt handsfree wisely, make sure you try it on BA properly before buying it... currently I am using i clip II mini, and it is giving me the same behaviour as shazzy84's
KRZTF said:
hello everyone!
i just got my first bt headset, its an anycom aris21.
the pairing with my blueangel worked like a charm, but after a day of useage, i noticed several issues i kinda dislike....
- i can not start a call (start phone) with my headset, when blueangel is not in PHONE menu! is this normal? can this be changed?
- how can i disable the phone's speaker (and mic), when using the headset? its pretty anoying to know, that the caller could be heard by bystanders...
- people seem to have problems hearing me! can i change the microfone volume of the bluetooth headset on the ba?
- how can i find out what BT stack i have?
- i have now helmi_c's WM06 installed, no changes to bluetooth made.
what recommended changes/updates/patches/... should i try for better performance?!
what to install for best results?!? is that BroadcomBT1.7 still the way to go? what cabs do I need?!
i know, that some issues have already been adressed, but things are changing so fast here, that i have problems being up to date about all issues! so forgive my ignorance and please help me!
i would be very thankful!!!
regards,
krz
Click to expand...
Click to collapse
Well I found a way to solve the BTA2DP problem. It supports stereo & is just fantastic. you can find these by the following link http://www.teksoftco.com/index.php?section=freeware & this software works too http://www.trianglepowers.com/PPC/ViewApp.aspx?ID=52 (have to register to download). I prefer Teksoft freeware as I am using it. Sometimes it takes a while after a few toggle u get it right
Lost in China
I have a problem with a Chinese Dopod HS-01 BT Stereo Headset!!!
Phone works, but the Stereo Headset starts for a second or two and then it is gone!
Please, help!
Admire people who can bring an answer!
I myself only good in learning physical languanges. So need MP3 HeadSet!
Also using SuperMemo CE the most beautiful tool for language learnig!
Is there any other solution then to change the registry and the things?
Using:
WM6 5.2.1938 (Build 18538.0.7.0.PV.HAT)Touch & Office 6.1 NetCF 3.5
No one to ask for help over here!
My MSN:
[email protected]
Skype:
janicic
MySpace:
www.myspace.cn/taijiyoga
Hi guys,
I've been scouring the web for a number of days now with no success. Was wondering if anyone is experiencing the same problem and if anyone knows if this can be fixed.
I have a HTC P3600i, with ROM 3.00.707.18 (latest ENG ROM I could find) and have been using a Jabra BT8010 (firmware 1.33) for some months with no problems on A2DP or Handsfree (even switching back and forth is ok).
Have just got myself a new Dell BH200 stereo BT headset (for better bass) and while A2DP is working pretty fine (very nice), I'm finding that I can't use the headset for incoming or outgoing calls at all.
Everytime I try doing calls, the headset icon on the phone screen disappears after 5 or so seconds, and the headset itself switches off right after.
Am hoping someone can point me to the right direction, thanks..
Well two years later
I own a Dopod C730 and lo and behold I bought a Dell BH200 and I have the exact problem descibed above. I have the latest rom and I have tried reseting the smartphone all for naught.
Well I hope someone has figured this one out at some point or else I am going to be disappointed in my new Christmas gift
Well, I gave up and sold off my BH200 already. Am back to using the Jabra BT8010.
same problem here with my HTC Touch (3452). It's really frustrating to have to remove the headset every time u have to take a call. did anyone fimd a solution to this?
an123 said:
same problem here with my HTC Touch (3452). It's really frustrating to have to remove the headset every time u have to take a call. did anyone fimd a solution to this?
Click to expand...
Click to collapse
I am not using touch. Mine is Asus P535. WM6
Do double pairing. 2 diffrent mode
1) Hi Fi Stereo
2) Hands free
Music would mute when the call is recieved. When you end the call the music comes back.
myc said:
Mine is Asus P535. WM6. Do double pairing. 2 diffrent mode
1) Hi Fi Stereo
2) Hands free
Music would mute when the call is recieved. When you end the call the music comes back.
Click to expand...
Click to collapse
This didn't work for me at all, on my HTC P3600i with the Dell BH200 headset. Pairing was ok, but as soon as there was an incoming call, the Dell headset would ring, and then silence.. I'd also notice that the headset icon on my phone would disappear and the headset itself would turn off.
My Jabra BT8010 headset, on the other hand, paired just fine as both handsfree and wireless stereo device. In fact, I've ditched the BH200 and am using the BT8010 till now.
Well how come i aint see this thread . Ok now BH200 works fine and it has no issues ( as you guys should understand if it works with ASUS , NOKIA , SAMSUNG phone ).The problem is HTC's coding . It doesnt support AVRPS, thats the service which is necesary for Phone to switch to calls when received and switch back to music. Now jabra uses a different technology ... But you will have to compramise on the quality of music in BH200
( its awesome ) and more over it looks like a music head set any ways .
damn! is there any workaround? or is AVRPS hardware specific? after A2DP and AVRCP, no we have another acronym to add to the lexicon
Same problem here, tested BH200 with Universal WM6 and Touch HD, headphones switch off seemingly when they receive handsfree request.
Tested them with WM5, lo and behold, it worked. Now I wonder - how come that they work with WM5 BT stack and not with WM6? Any ideas?
Well, from what I gather, at least the good news is that AVRPS is not hardware-specific... so there should be a suitable workaround to this problem for anyone using WM6.
I bought my pair of Dell BH-200 headphones yesterday and while I'm absolutely thrilled by the perfect (at this price) sound quality when playing music, I'm rather annoyed by the fact that I have to take off my headphones every time I want to receive a call. After all, that's what a headset is for, right!?
In any case, here are the specs of my phone:
HTC Touch Elfin P3452, running an up-to-date Windows Mobile 6.1 (Onyx ROM)
I'm considering upgrading to Windows Mobile 6.5 these days to see if that would do the trick... has anyone of you guys tried the Dell headphones' headset compatibility when running WM 6.5? Going back to WM5 is definitely not a option, since I didn't quite enjoy the looks & ergonomics of that OS...
P.S.: Upgrading to WM 6.5 didn't do the trick, unfortunately So I'm pretty much stuck and I don't want to return the headphones since I really enjoy them, of course once I ignore how they don't actually function as a proper headset... Any help would be greatly appreciated!
I just found this fix for the situation:
http://social.microsoft.com/Forums/...s/thread/368efd50-ce24-453a-a31c-e6747c698082
Try setting the registry value:
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\UseESCO = DWORD:0
Click to expand...
Click to collapse
The best part is, it seems to be actually working (I'm with Touch HD with Win 6.1).
Hey, is anyone using the bluetooth headset Jabra BT8040, When I first bought the headset, I had no problems using it. But I've noticed a few months ago, that whenever I use the device, the person I'm calling wont be able to hear me but I can hear them. Anyone have any ideas to solve this problem?
Similar problems
I've got the same earpiece and I've had some problems with it, including: unable to pair (or saying it's paired when it really isn't), unable to connect the BT on a call, and sometimes the earpiece will just disconnect from the phone (but the call will still remain active).
That last one is the closest I've come to your issue. I usually have to put the phone in discovery mode (and the earpiece) and try repairing them from scratch.
I've heard from others with this earpiece that they haven't had problems, but I don't know anyone who has this earpiece and the Raphael. Also, I've got the Motorola S9 bt headphones and I haven't had any problems with them. So, I'm not 100% it's the earpiece but then again it could be.
i have this jabra for about 6 months and had no problem at all with Raphael!
Changed ROM
I've just changed the ROM on my phone (as in signature line) so that may change things for me with the Jabra BT.
BPB21 said:
I've just changed the ROM...
Click to expand...
Click to collapse
Please post your results with your new ROM...David.
Updated ROM & BT
Black C5 said:
Please post your results with your new ROM...David.
Click to expand...
Click to collapse
I'm using the updated ROM and radio in my signature line with the Jabra BT8060 (wasn't it? whatever the one we were talking about in this post is) as well as a Motorola S9 and I pair it with my laptop for internet access that way. So far I have not had the same troubles with the Jabra BT as I used to. It could be due to updated drivers for the BT or the fact that I'm not using TF3D (just the new WM6.5 interface).
Either way, I'm having good results so far.
I spoke too soon on BT...
I've spoken too soon on BT. I was trying to get my Motorola S9 working so I could listen to music from my phone. No luck at all - it shows the S9 connected for both the calls and the the music, but it only works on calls and the music plays on the device with the speaker. And it was working just fine this morning. Bluetooth in general is so frustrating to me that I would literally remove it from every costom ROM I use EXCEPT for "Internet Sharing" (on an Acer laptop and netbook) over bluetooth and activesync with a PC. Not just with this phone, but seriously, with BT 2.0 it should work A LOT BETTER than it does.
I have similar issues with several different Moto H700's. I can hear them but they can not hear me. Possibly the BT drivers from HTC need a fix????
I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?
Hello guys!
I purchased this BH-501 headset today for my Defy to listen to music and to use in phone calls. The device pairs properly, the audio quality is good, buttons are working however during calls it seems that voice is breaking up and the volume is low (I can hear the other person perfectly however he can barely hear me and it breaks up every few seconds).
I would be grateful if someone could give me some advice or maybe should I return the headset and get my money back?
---
I've tried the headset on a Nokia phone and the issue did not occur voice volume was good and no breaking up.
My problem is that I can't figure out why this is happening. Is it incompatibility with Defy hardware or is it a problem with my Android version?
If it helps I'm using 3.4.2-177-5 nordic deblur:
-System version: Moto_Version.34.177.5.Retail.en.ND
-Firmware: 2.2.2
-Baseband: EPU93_U_00.59.01
-Kernel: [email protected] #1
---
Thank you!
I have identical issue whit Bh-104!!
i use WM 6.5 and HTC Blackstone
i have the same Bluetooth Headset myself. the audio quality is horrible when you pair it with both my motorola XT720 and Defy. probably motorolas way of making people buy their over priced headsets.... >_> though they do look cool...
I tested it on another Defy and it acted the same so I returned them and got my money back.
Thank you for the input guys!
kwhiper said:
and got my money back.
Click to expand...
Click to collapse
This is not a solution
I have the similar problem that voice call is half-duplex when Bluetooth handsfree, Jabra Wave is connected.
Is there any ROM or SW version that don't have this problem??
Nokia phones are working normally, full-duplex with Jabra Wave so Jabra is fine!
How to make DEFY Bluetooth voice full-duplex??
I have tried all firmware versions, NONE WORK! and-developers.com/sbf:defy