Database Users

flashing att logo, recovery mode sudden death?

after using the "Odin3 One-Click Downloader" my i9000 only loops the att logo on and off, recovery mode and download mode are no longer working... had anyone experienced this?

well this is f...ed up..... my i9000 was unbranded, and that one click crap must have flashed the captivate fw or smth, should i let my phone die in peace now?

There are different oneclick apps for different branded SGSs. Which one did you download? Sounds like you downloaded the AT&T version.
You have to boot your phone into download mode again to flash the correct ROM for your specific phone. There are many different ways to get the phone into download mode. Check the dev forum or instructions.

foxbat121 said:
There are different oneclick apps for different branded SGSs. Which one did you download? Sounds like you downloaded the AT&T version.
You have to boot your phone into download mode again to flash the correct ROM for your specific phone. There are many different ways to get the phone into download mode. Check the dev forum or instructions.
Click to expand...
Click to collapse
"[STOCK ROM] Odin3 One-Click Downloader and Drivers" I've downloaded this one... and i cant boot into download mode, the 3 button methods died on me

Its for captivate.... And your phine iscompletely bricked. Needs a new mother board.
Why people download weird **** from untrusted sources?
Sent from my GT-I9000 using XDA App

Phone is completely bricked. Happened to me, and a few others too. Seems that these one-click odin downloaders do more harm than good. Hahaha...
Anyway, phone is bricked. Samsung replaced the motherboard for me. Luckily it's under warranty at no cost to me..

Seifer1975 said:
Phone is completely bricked. Happened to me, and a few others too. Seems that these one-click odin downloaders do more harm than good. Hahaha...
Anyway, phone is bricked. Samsung replaced the motherboard for me. Luckily it's under warranty at no cost to me..
Click to expand...
Click to collapse
replace the motherboard? what the fudge.. i gave it to a local repair shop (samsung recommended one) and well.. they will try to reflash it or smth.. if that wont work, how much would replacing the motherboard cost? i'm out of warranty

dupel said:
Its for captivate.... And your phine iscompletely bricked. Needs a new mother board.
Why people download weird **** from untrusted sources?
Click to expand...
Click to collapse
What untrusted source? He went into Captivate forum here in XDA to download Captivate stock ROM. What do you think the outcome will be?

it might cost you around $150 or so, if i remember reading a recent post about a guy replacing his mb too. I think he had the same problem as you.

SwiftPolar said:
it might cost you around $150 or so, if i remember reading a recent post about a guy replacing his mb too. I think he had the same problem as you.
Click to expand...
Click to collapse
could you find that post for me? i cant seem to find it myself...

well, so far, i've found out that by flashing the i9000 (unbranded) with a captivate FW remapped all the buttons except for the power button, so download mode or recovery mode is impossible via any button combination. But if the phone does show something on the screen, its still only semi-bricked, in my case, its stuck at the bootloader. its fixable with JTAG ... i hope the service i took it to has a jtag device and will reflash to the i9k FW. and it would only cost me 10$ for the repairs

who had a similar experience?

I had exactly the same problem, after updating my phone through kies which failed halfway through i downloaded odin which at the time i didn't know was the wrong one and not for the i9000. in the end i had to get a new phone.
Sent from my GT-I9000 using XDA App

aaronlivo said:
I had exactly the same problem, after updating my phone through kies which failed halfway through i downloaded odin which at the time i didn't know was the wrong one and not for the i9000. in the end i had to get a new phone.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
were you under warranty? did you try to repair it ?

well my sgs is not fully bricked, it does not need a new motherboard... it just needs to be reflashed with jtag or smth >.<
a fully bricked (faulty) device would not turn on at all

allright, so just by flashing the phone with that one click odin crap, the repairs are going to cost me 250$

Bricked Your Phone, Post Here !

This Thread Is For Them Who Bricked There Phones​
Don't start a new thread for your bricked phone & post here.
We will help you with every possible solutions.
​
Here are some quick tips :
(Here I'll use the terms like Download-Mode & Recovery-Mode, If you dont know what are they please click here. There "BOOT to RECOVERY" & "BOOT to BOOTLOADER" means how to enter into Recovery-Mode & Download-Mode respectively.)
A Bricked Phone May Have One or More (Below Problems) :
1. Booting to the ROM(Android) not possible.
2. Booting to the Recovery-Mode not possible.
3. Black screen or Bootloop(Repeated Restarting of Phone at Boot Animation or Samsung Galaxy Y Logo).
Possible Solutions :
(Remember there'll be data loss using these solutions so always try to keep a backup)
1. If you can still enter into Recovery-Mode
(a). Try to clear Data & Cache then check.
(b). Try Installing a Custom ROM using CWM(ClockWorkMod Recovery) & check.
(For Custom ROM & CWM Visit here.)
2. If Recovery-Mode didn't helped Enter into Download-Mode & flash an odin supported stock rom(using ODIN 1.84 or 1.85) from Doky73's Thread(Flashing Guide in 2nd post).
*You can inform me, if anything left out.
Note :
1. I'll be not held responsible for anything that happens to your phone.
2. Before posting try to search for similar type problems out there & try the solution, if that doesn't solve your problem then post here.

Make this a sticky.. there are many users who say that their phone is bricked

help! bricked SGY
galaxy y bricked
i bricked my sgy last 3 weeks.
here's what i did.
-installed creedsix rom.
-installed UOT kitchen Themes.
-wipe data
problem
-stuck in bootlogo
-softbricked.
-cant go to recovery mode
-flashed too many times, still stuck in bootloop
i flashed at least 20 times, with different firmwares.
but still no luck, still boot lop.
my professor said something about secondary bootloader that might help. but i had definitely no idea what it is.
i asked some techies on the mall, and they said that this phone must undergo the JTAG process. but it cost $20.
help me. thanks.

jmpotter said:
galaxy y bricked
i bricked my sgy last 3 weeks.
here's what i did.
-installed creedsix rom.
-installed UOT kitchen Themes.
-wipe data
problem
-stuck in bootlogo
-softbricked.
-cant go to recovery mode
-flashed too many times, still stuck in bootloop
i flashed at least 20 times, with different firmwares.
but still no luck, still boot lop.
my professor said something about secondary bootloader that might help. but i had definitely no idea what it is.
i asked some techies on the mall, and they said that this phone must undergo the JTAG process. but it cost $20.
help me. thanks.
Click to expand...
Click to collapse
can you go to download mode??
(try pressing volume down+ home button + power button all at the same time)
if it still can, then your SGY is still good
go to this ---> thread
and just flash your country's firmware

From where you got the firmwares.... How you flashed...
Ever tried re partitioning.... Ever flashed boot loader....
For info... Jtag or boundary-scan is used for testing & servicing high technology electronic boards...
Sent from my GT-S5360 using Tapatalk 2

Millan.SIS said:
From where you got the firmwares.... How you flashed...
Ever tried re partitioning.... Ever flashed boot loader....
For info... Jtag or boundary-scan is used for testing & servicing high technology electronic boards...
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
just for info, jtag will not fix the problem. IT IS SCANNING.. like trouble shooting.
that only means that those technicians are pretending to be well educated but the truth is that they only wanted to get some cash out of your pocket.

static28 said:
just for info, jtag will not fix the problem. IT IS SCANNING.. like trouble shooting.
that only means that those technicians are pretending to be well educated but the truth is that they only wanted to get some cash out of your pocket.
Click to expand...
Click to collapse
ya, that's what those wannabees really do..
Sent from my GT-S5360 using Tapatalk 2

this one will a little bit off topic...what is creedsix?is it a rom for SGY?
if the phone still can boot that means everything is fine. pull out the battery, wait 10 seconds, reinsert the battery, do three magic combo button, you'll enter recovery mode. don't worry about our bootloader. our bootloader is stored in different partition thus installing any custom rom won't affect our bootloader. as far as i know, there is only one person who have messed up with bootloader and got an ultimate hard brick.

kurotsugi said:
this one will a little bit off topic...what is creedsix?is it a rom for SGY?
if the phone still can boot that means everything is fine. pull out the battery, wait 10 seconds, reinsert the battery, do three magic combo button, you'll enter recovery mode. don't worry about our bootloader. our bootloader is stored in different partition thus installing any custom rom won't affect our bootloader. as far as i know, there is only one person who have messed up with bootloader and got an ultimate hard brick.
Click to expand...
Click to collapse
Really its great thread ........ Many many thanks for helping ppl ......
is it possible repair hard brick ..... what is hard brick... if device hard brick device gos life time dead ??
Sent from my GT-S6102 using xda premium

a hard brick is when our device doesn't respond to power button.
the guy that I've mentioned above is doky73. he accidentally flash a bootloader for sgs2 into his sgy. last time he said that he send his sgy to samsung service center and buy a new one. I'm not sure if samsung has revived his sgy.
edit: I didn't to offend him but I think I've mispelled doky's username. edited.

manoranjan2050 said:
Really its great thread ........ Many many thanks for helping ppl ......
is it possible repair hard brick ..... what is hard brick... if device hard brick device gos life time dead ??
Sent from my GT-S6102 using xda premium
Click to expand...
Click to collapse
whatever It may be... You should never mess up with bootloaders, if you don't actually know what's there significance...
Brief description on android starting process :
pbl(primary boot loader "boot.bin") executes first and then it executes sbl ...
Sbl(secondary boot loader "sbl.bin") is responsible for responding to combos...download mode.. Intercepting odin commands..... booting system...booting kernel.... Charging your battery while switch off... Etc etc
Harm anyone of them... And Your phone goes into lifetime hibernation, Hard-bricked.
Sent from my GT-S5360 using Tapatalk 2

thanks for the big info friend...... so hard bricl is mot repairble ......
Sent from my GT-S6102 using xda premium

my device might be bricked, can you please help me out
Hi to all, it's only my second post but i have a major problem with my samsung s-5360. it's won't boot anymore, but it can enter cmw and recovery. This is what i did wrong i believe. At first i installed morocs 1.8 kernel on creed fusion version 3.1 and it wouldn't boot anymore, so i ended up using a back-up i made before with cmw. And it worked well and phone was booting again and was on stock again. ( because back-up was made with stock-version obviously )
Then i thought: well let's try repensis noob version. And installed it and there was also an update 2 and installed it over it as well before booting the os, maybe this is what i did wrong dunno .. But afterwards it didn't boot anymore and whatever i tried, restoring one of the 3 images i made, or using one of the roms posted here like Creed fusion 3.1 rom or Aurora 2 nor Chobits didn't work.
I also tried reverting to stock with odin 1.85 but when i connected my phone via usb to the pc, odin didn't see my phone. ( after selecting the 3 tar files in odin ) Maybe i'm doing wrong something there.
What i also have to add is that when doing factory wipe in recovery it says formatted E: but unable to format E:\dev10 and dev11. clearing cache is no problem and also cleared dalvik cache. Can you please help me out ? I know, it sounds very noobish but well, i have to face it because can't do it myself without help anymore it seems ... Thanx a lot in advance.

please make sure that you've installed the driver and plug the usb to computer only on download mode when flash with odin. dev10 and dev11 are the partition for data and cache. that error means something was wrong with your recovery mode. you'll need to install a fresh stock rom with odin.

kurotsugi said:
please make sure that you've installed the driver and plug the usb to computer only on download mode when flash with odin. dev10 and dev11 are the partition for data and cache. that error means something was wrong with your recovery mode. you'll need to install a fresh stock rom with odin.
Click to expand...
Click to collapse
Thanx a lot for responding ! I only used kies for connecting my phone because i couldn't find a driver for it, and had to disconnect it, but i will search for it again now and hopefully it will work now. i have to go now and return back in three hours. i'm very curious ! i'll come back in a couple of hours and gonna tell if it worked out of course

kurotsugi said:
a hard brick is when our device doesn't respond to power button.
the guy that I've mentioned above is doky77. he accidentally flash a bootloader for sgs2 into his sgy. last time he said that he send his sgy to samsung service center and buy a new one. I'm not sure if samsung has revived his sgy.
Click to expand...
Click to collapse
to be precise: the guy was Doky73...
I was playing with different revisions of SBLs because on SGS2 some old SBL gives the possibility to reset custom bin counter via JIG. At a given point accidentally browsed SGS2 bootloader instead of SGY one...
But I did perfect job, the service center wasn't able to detect the cause of bricking, but they recovered my phone under warranty. (I think they're not reading this forum )

Doky73 said:
to be precise: the guy was Doky73...
I was playing with different revisions of SBLs because on SGS2 some old SBL gives the possibility to reset custom bin counter via JIG. At a given point accidentally browsed SGS2 bootloader instead of SGY one...
But I did perfect job, the service center wasn't able to detect the cause of bricking, but they recovered my phone under warranty. (I think they're not reading this forum )
Click to expand...
Click to collapse
Thanks friend.............
if i install some custom rom custom kernel via odin or CWN its gos to hard brick ???
in odin re-partition option for why ............ its disbl by default if i enable it wats problem........
dear friend if u have any odin full tutorial /guide /ref please provide me for learn syep by step one by one option or problem......

ops...my mistake. I guess I'm too sleepy when was typing your name. I'll edit it. sorry.

manoranjan2050 said:
Thanks friend.............
if i install some custom rom custom kernel via odin or CWN its gos to hard brick ???
in odin re-partition option for why ............ its disbl by default if i enable it wats problem........
dear friend if u have any odin full tutorial /guide /ref please provide me for learn syep by step one by one option or problem......
Click to expand...
Click to collapse
if u flash something through odin or cwm then you wouldnt hard brick ur phone.. it would be just a temporary brick which can be easily revived... i dont know abt that partioning thing
Sent from my GT-S5360 using XDA

kurotsugi said:
please make sure that you've installed the driver and plug the usb to computer only on download mode when flash with odin. dev10 and dev11 are the partition for data and cache. that error means something was wrong with your recovery mode. you'll need to install a fresh stock rom with odin.
Click to expand...
Click to collapse
Hi, there i am and sry for disturbing you again or someone else but i managed to install a non kies usb driver and i'm flashing thru odin 1.85 right now but i'm stuck at BcmCP.img for over an hour . Is it because i forgot to remove the sd card ? I only removed the sim and is it safe to stop the process and start over again or should i wait ?
---------- Post added at 02:35 AM ---------- Previous post was at 01:47 AM ----------
mickeyindahouse said:
Hi, there i am and sry for disturbing you again or someone else but i managed to install a non kies usb driver and i'm flashing thru odin 1.85 right now but i'm stuck at BcmCP.img for over an hour . Is it because i forgot to remove the sd card ? I only removed the sim and is it safe to stop the process and start over again or should i wait ?
Click to expand...
Click to collapse
Well after trying this proces for the 5th time i finally managed to go to stock rom and it only lasted a couple of minutes Of course thanx to doky73 who made all this possible ! So i unbricked it for the second time i guess

Desperately need cwm touch screenshots

Hey guys,
Just had the fantastic AMOLED breaking symptom of the Galaxy S4. I need to restore to factory TouchWiz so I can go in and get a replacement phone (I had rooted and flashed stock Android and am afraid they'll figure this out and refuse to give me a new phone despite the physical damage) so I desperately need screenshots/photos of the CWM Touch 6.0.3.2 options to restore a backup (the only one I have on the phone).
If there's any other way to do this please let me know.
Beyond that, since the screen appears to be getting progressively worse to the point where I just can't install anything, is there any way I can remove any evidence of root/flashing from the file system just in case?
Please help!
Thank you!

cleanup said:
Hey guys,
Just had the fantastic AMOLED breaking symptom of the Galaxy S4. I need to restore to factory TouchWiz so I can go in and get a replacement phone (I had rooted and flashed stock Android and am afraid they'll figure this out and refuse to give me a new phone despite the physical damage) so I desperately need screenshots/photos of the CWM Touch 6.0.3.2 options to restore a backup (the only one I have on the phone).
If there's any other way to do this please let me know.
Beyond that, since the screen appears to be getting progressively worse to the point where I just can't install anything, is there any way I can remove any evidence of root/flashing from the file system just in case?
Please help!
Thank you!
Click to expand...
Click to collapse
Gentle bump! I just need to know which menu items to pick as I won't really be able to see what I'm doing lol

cleanup said:
Gentle bump! I just need to know which menu items to pick as I won't really be able to see what I'm doing lol
Click to expand...
Click to collapse
flash stock firmware with odin. easier to get into download mode :good:

samersh72 said:
flash stock firmware with odin. easier to get into download mode :good:
Click to expand...
Click to collapse
Honestly I'm even having trouble booting into recovery mode because I can't tell when the prompts are to let go of the power button, etc. Can't see a thing.
Any advice?
The wireless company has already agreed to ship me a new device and a return label with which I can return the old one (so I'll get my new phone before having to return the old one) but I still want to do this out of safety and respect.

Hate to be the one to tell u but as far as i know (anyone correct me if im wrong) everytime u flash a rom (dont know if rooting counts) its recorded on ur phone.u can undo this with triangle away, wich can be found at the same site where autoroot is.
Sent from my GT-I9505 using XDA Premium HD app

cleanup said:
Honestly I'm even having trouble booting into recovery mode because I can't tell when the prompts are to let go of the power button, etc. Can't see a thing.
Any advice?
The wireless company has already agreed to ship me a new device and a return label with which I can return the old one (so I'll get my new phone before having to return the old one) but I still want to do this out of safety and respect.
Click to expand...
Click to collapse
just hold volume down first followed by home followed by power, wait for 7 seconds, release buttons, press volume up one time and you are in download mode, connect to odin and flash stock firmware. thats it.
no way for triangle away without screen

samersh72 said:
flash stock firmware with odin. easier to get into download mode :good:
Click to expand...
Click to collapse
richard2311 said:
Hate to be the one to tell u but as far as i know (anyone correct me if im wrong) everytime u flash a rom (dont know if rooting counts) its recorded on ur phone.u can undo this with triangle away, wich can be found at the same site where autoroot is.
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
Well, they're sending me the new one before taking the old one back, so I think it'll be okay. Plus they're mostly concerned with the broken screen; it's not a bricked device.
samersh72 said:
just hold volume down first followed by home followed by power, wait for 7 seconds, release buttons, press volume up one time and you are in download mode, connect to odin and flash stock firmware. thats it.
no way for triangle away without screen
Click to expand...
Click to collapse
Okay, the phone showed up in ODIN. Downloading a stock firmware package for my carrier right now but I'm honestly not sure how to use Odin to flash it? Is there a tutorial anywhere? Thanks for the help!

cleanup said:
Well, they're sending me the new one before taking the old one back, so I think it'll be okay. Plus they're mostly concerned with the broken screen; it's not a bricked device.
Okay, the phone showed up in ODIN. Downloading a stock firmware package for my carrier right now but I'm honestly not sure how to use Odin to flash it? Is there a tutorial anywhere? Thanks for the help!
Click to expand...
Click to collapse
see my signature for tutorial

kernel question

hello everyone
i know that if i flash a kernlel unsuccessfully then i will lose my recovery mode
but i want to know if download mode will also be gone ie i wont be able to download mode
or it will open and recovery mode will not open
please reply fast/////////

download mode will still be available
the only risk to download mode is if you flash a firmware that is not meant for your phone

marcussmith2626 said:
download mode will still be available
the only risk to download mode is if you flash a firmware that is not meant for your phone
Click to expand...
Click to collapse
Im flashing ddlk2 firmware
Sent from my GT-S5360 using Tapatalk 2

abhishekr700 said:
Im flashing ddlk2 firmware
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
No problem. If you flash DDLK2 with Odin, you will not lose Download mode.
Download mode is lost means HARDEST brick.
It can happen if you mess with .pit or bootloader wrongly.
(It happened to XDA Recognized Contributor doky73 when he flashed Galaxy S2 bootloader)
(His device was never repaired)
In that case nothing can restore your phone, not even USB jig.
But JTAG may repair your device.

hnkotnis said:
No problem. If you flash DDLK2 with Odin, you will not lose Download mode.
Download mode is lost means HARDEST brick.
It can happen if you mess with .pit or bootloader wrongly.
(It happened to XDA Recognized Contributor doky73 when he flashed Galaxy S2 bootloader)
(His device was never repaired)
In that case nothing can restore your phone, not even USB jig.
But JTAG may repair your device.
Click to expand...
Click to collapse
well
even when i flash stock rom via odin i only choose pda,csc and phone options
one question how can we check whether a rom contains bootloader
i mean are there other files in such a rom other than system meta-inf and data

abhishekr700 said:
well
even when i flash stock rom via odin i only choose pda,csc and phone options
one question how can we check whether a rom contains bootloader
i mean are there other files in such a rom other than system meta-inf and data
Click to expand...
Click to collapse
If on PC, use WinRAR/Winzip/7zip to open and check ROM.zip
If on phone use Root Explorer. (Simply click the ROM.zip)
If it contains META-INF, system, data (and/maybe) boot.img, (and/maybe) busyboxinstall it is safe.
# HERE BY SAFE I MEAN MAXIMUM IT CAN SOFT BRICK YOUR DEVICE, WHICH IS RECOVERED BY ODIN.
Bootloader is not replaced by Flashable zip in Galaxy y. So forget about it.
Bootloader is only replaced by odin.
*** I TELL YOU, DO NOT MESS WITH BOOTLOADER OR .PIT***
Result is hard-bricked device, not recoverable by Odin, USB Jig. Not recovered also by JTAG.
You must have to see those charming(!!!!!) Samsung Care Guys (Pun intended ) to repair such device.

hnkotnis said:
If on PC, use WinRAR/Winzip/7zip to open and check ROM.zip
If on phone use Root Explorer. (Simply click the ROM.zip)
If it contains META-INF, system, data (and/maybe) boot.img, (and/maybe) busyboxinstall it is safe.
# HERE BY SAFE I MEAN MAXIMUM IT CAN SOFT BRICK YOUR DEVICE, WHICH IS RECOVERED BY ODIN.
Bootloader is not replaced by Flashable zip in Galaxy y. So forget about it.
Bootloader is only replaced by odin.
*** I TELL YOU, DO NOT MESS WITH BOOTLOADER OR .PIT***
Result is hard-bricked device, not recoverable by Odin, USB Jig. Not recovered also by JTAG.
You must have to see those charming(!!!!!) Samsung Care Guys (Pun intended ) to repair such device.
Click to expand...
Click to collapse
thanx as i told you i never even touch bootloader option in odin nor the pit file

abhishekr700 said:
thanx as i told you i never even touch bootloader option in odin nor the pit file
Click to expand...
Click to collapse
Don't mention Thanks. Just press the button :good: :laugh::silly:
It can be used to decrease length of thread

hnkotnis said:
Don't mention Thanks. Just press the button :good: :laugh::silly:
It can be used to decrease length of thread
Click to expand...
Click to collapse
pressed please reply to my lidroid toggle thread
i cant install the compiled app why??

abhishekr700 said:
pressed please reply to my lidroid toggle thread
i cant install the compiled app why??
Click to expand...
Click to collapse
I told you, there is a signature error. (it is not solved by signing the apk)
I also told you give me systemui.apk (ROM MUST BE DEODEXED)
and I will do it for you.

hnkotnis said:
I told you, there is a signature error. (it is not solved by signing the apk)
I also told you give me systemui.apk (ROM MUST BE DEODEXED)
and I will do it for you.
Click to expand...
Click to collapse
i have already given
and how to fix signing issue

abhishekr700 said:
i have already given
and how to fix signing issue
Click to expand...
Click to collapse
I will send you a PM
(Now I am working on systemui.apk)
After that I will send you PM.
If you have some work, don't wait for me. This may take long time.
(I am with friends in canteen, so work is slow).

Bug in kitkat 4.4.2 in SMG7102 INS Grand 2 [solved]

hi friend i am facing some bug in my device after kitkat update g4 and i thought it get fix in next version but not in nh3 too. Bug are in home lock screen walpaer dnt get change in ripple effect
And while using sim 2 only by disabling sim 1 and req ussd code and make a call it says mobile network nt availble.
have ur facing similar problem like it plese do share.
Get Fixed link : http://forum.xda-developers.com/gal...tkat-4-4-2-smg7102-ins-grand-2-t2851126/page2

Bro try clearing cache in recovery mode.
Even if the problem exits try reinstalling the Firmware using odin

First thing try interchanging the sims and later try factory reset and finally if none works Flash the firrmware

Rahul10 said:
Bro try clearing cache in recovery mode.
Even if the problem exits try reinstalling the Firmware using odin
Click to expand...
Click to collapse
Ok i done it .but no any workd ?

Sanjuujosephh said:
First thing try interchanging the sims and later try factory reset and finally if none works Flash the firrmware
Click to expand...
Click to collapse
I done no any change.. any one facing problem like this?

abilash10 said:
I done no any change.. any one facing problem like this?
Click to expand...
Click to collapse
Try reinstalling the Firmware or try factory resting....

ok bro
Rahul10 said:
Try reinstalling the Firmware or try factory resting....
Click to expand...
Click to collapse
ok bro.. and how may i reset that count ?? how much time it unroot and root ?make it to zero.

abilash10 said:
ok bro.. and how may i reset that count ?? how much time it unroot and root ?make it to zero.
Click to expand...
Click to collapse
Sry bro i didn't get you.?

Rahul10 said:
Sry bro i didn't get you.?
Click to expand...
Click to collapse
I mean how may i get my warranty back by making binary zero? Triangle away is aplicable?

abilash10 said:
I mean how may i get my warranty back by making binary zero? Triangle away is aplicable?
Click to expand...
Click to collapse
You don't need to use Triangle Away now... You must press three buttons (home + power + volume DOWN) until a screen with a triangle shows, you press volume up to continue, then plug in your phone via USB (Of course to your PC) after the "Downloading..." screen appears.
Assuming you already have all drivers and stuff to listen from your USB connection, you then have to open Odin program to flash the firmware file you used to install KitKat. That's how you re-install your firmware.
-------------------------------------------------------------------------------
To reset cache partition, you hold down home, power and volume UP this time, this is for entering recovery mode, when you see the blue "Recovery botting" at the top you can release all buttons now, then you go down to "Reset cache partition" and make sure you don't select "Factory reset" if you see a long list of "No no no no no no" then you're in the wrong area, and you MUST go back again.

abilash10 said:
I mean how may i get my warranty back by making binary zero? Triangle away is aplicable?
Click to expand...
Click to collapse
Our Grand 2 doesn't have a KNOX WARRANTY VOID bit. Don't worry.
But this will be important if rooting a S4 or a Note 3 or above.

WaseemAlkurdi said:
Our Grand 2 doesn't have a KNOX WARRANTY VOID bit. Don't worry.
But this will be important if rooting a S4 or a Note 3 or above.
Click to expand...
Click to collapse
Ok thks for this.

WaseemAlkurdi said:
Our Grand 2 doesn't have a KNOX WARRANTY VOID bit. Don't worry.
But this will be important if rooting a S4 or a Note 3 or above.
Click to expand...
Click to collapse
Then why does we have this in our device?
And why do we have to disable knox during the root process

Rahul10 said:
Then why does we have this in our device?
And why do we have to disable knox during the root process
Click to expand...
Click to collapse
hi friend yes in our device there is no any warranty void count.. it is in s4 .s4 mini note 3 etc.. rom ..

Bug get fixed in new nh6

bug fixed in nh6
Finally bug get fixed in nh6

Rahul10 said:
Then why does we have this in our device?
And why do we have to disable knox during the root process
Click to expand...
Click to collapse
Because it shows annoying notifications saying:
Unauthorized changes have been made. Reboot to undo them.
Nothing happens after a reboot.
KNOX*.apk are the ones responsible for this.