Hi, I root my defy+ and i have a little problem. When i'm trying to call somebody, my camera try to turn on (make that sound when i access the camera)
I have JB 4.1.2 Quarx 24.09
That is quite an old ROM. Newer ones have less bugs. Maybe you could try upgrading.
Sent from my MB526 using xda app-developers app
domokos said:
That is quite an old ROM. Newer ones have less bugs. Maybe you could try upgrading.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
with the last update, my signal is gone )
Sorry to hear. I have no problems with the 23/12 ROM. I use it with JellyX kernel.
Sent from my MB526 using xda app-developers app
I flash 23/12 and the signal is back ) ... and my problem with camera disappeared ... i hope
Too slow.. I think i do someting wrong... I flash it yesterday but is crushing and crushing again... It not turning off.. only from boot
Q - am i need anything to flash the rom but that zip from quarx?...
Wipe data/dalwik instalat rom wipe data/dalwik instalat gaps wipe data/dalwik and restant...
Related
Playing with my wifes defy. Its rooted on stock rom. Looking for a GB rom with everything working for a green lens defy. Whats suggested. Everything i seem to read in my little time searching, is red lens or green lens without working camera. So everything has to work.
Sent from my HTC Vision using xda premium
CyanogenMod 7.1
you can try nightly build i have 13 Dec and i don't have any problems
rogier666 said:
CyanogenMod 7.1
Click to expand...
Click to collapse
I agree, go to cyanogemmod site and use a stable version
Sent from my MB525 using xda premium
Thank for the info. Not real familiar with the defy. Going to give the 7.1 a try and see if she gets mad. LOL
Better take latest one from here. It are the builds of Epsylon. He's the (one of) the guy's who push everything to the official nightly's. Latest stable one is old and the latest one's are even more stable
Labsin is telling the best route. I have epsylon3's cm9 rom installed. His builds are great!
Sent from my MB525 using xda premium
Going to be giving this a shot tonight.
Sent from my HTC Vision using xda premium
Ok installed the latest nightly and there is no market app. Installed market from on line and it will not work. Now what. Ill have to restore backup if not a solution immediatly. Wife is not happy.
Sent from my HTC Vision using xda premium
I have the fix for you:
Download the GAPPS for the ROM you use,
will probably be on the same thread.
Flash it in CMW!
Hey presto, working everything!
Hi Now am using 2.3.7 version and kernal 2.6.32.9-gb in my defy,
Am planing to install ICS 4.0.3.What kernal should download?
Becoz i already tried Mar 3 build but its stucked many times and getting restarted again so pls tel the correct methods and kernal.GApps.
Can any one help me?
If you have gingerbread kernel you need to install a Defy+ build. If you have a normal defy, I think you need to install batery fix as well. I'll try to find it. Defy+ builds work well with red lense defys, but I don't think camera works for green lense users.
Thanks...so shall I install defy + build...and kernal link available separately....what is the use of those kernal...how. and wat should be install
Sent from my MB525 using XDA
You already have a kernel. Or else you wouldn't be able to use the phone. You've already told me that you have a gingerbread kernel. So don't bother flashing a new one.
Gapps is on first page for main CM9 thread. Battery fix is somewhere in the thread :-/ Look around page 300
Sent from my Defy+ using xda premium (app needs update!) Hit the thanks button if I could help ;-)
So defy + build and gapps,should I wipe data and cache? Procedure pls
Sent from my MB525 using XDA
Se the main CM9 thread! -first page
EDIT: Don't install the cm9 kernel! It gives bootloader error
Sent from my Defy+ using xda premium (app needs update!) Hit the thanks button if I could help ;-)
in march 17 defy+ build not availiable
Sent from my MB525 using XDA
Use quarx2k.ru to get Quarx's Cm9 Defy+ nightly
Sent from my Defy+ using xda premium (app needs update!)
Will it create any issue if I install cm9 kernal...can I use mine without cm9 kernel
Sent from my MB525 using XDA
madhavandeffy said:
Will it create any issue if I install cm9 kernal...can I use mine without cm9 kernel
Sent from my MB525 using XDA
Click to expand...
Click to collapse
CM9 Kernel gives bootloader error. It's for froyo kernel users only (as far as i've understood)
DON'T flash it! It will soft brick your phone!
fiskenigaten said:
CM9 Kernel gives bootloader error. It's for froyo kernel users only (as far as i've understood)
DON'T flash it! It will soft brick your phone!
Click to expand...
Click to collapse
I hope all doubts over
CM9 builds,gapps & battery fix is enough to my phone to run ICS.
Have to flash above three things?
Am i right?
Yup, that should be it.
Battery fix for RED LENSE Defy:
http://forum.xda-developers.com/showpost.php?p=23178127&postcount=1566
Is der any settings to be done after flash battery fix
Sent from my MB525 using XDA
If you mean anything else to install, then no. Does charging work?
Sent from my Defy+ using xda premium (app needs update!)
fiskenigaten said:
CM9 Kernel gives bootloader error. It's for froyo kernel users only (as far as i've understood)
DON'T flash it! It will soft brick your phone!
Click to expand...
Click to collapse
That is true. I have a Defy+ and I installed the CM9 kernel. It soft bricked my phone and I had to do a SBF flash, root CWM recovery and all things all over!! Flash the CM9 built for Defy+ by Quarx. It does restarts and freezes ocassionally but is okay otherwise for a beta version!!
I have 7/12 nightly installed on my phone, and I noticed lately my phone is keep shutting off. It starts with no problems but I miss phone calls, messages. What can I do to fix this?
Thanks you.
Sent from my GT-I9000 using xda app-developers app
use stock
lcalin77 said:
I have 7/12 nightly installed on my phone, and I noticed lately my phone is keep shutting off. It starts with no problems but I miss phone calls, messages. What can I do to fix this?
Thanks you.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Your getting Sleep of Death. If using a custom kernel, disable deep idle. Also install voltage control (or nstools for custom kernel) and bump up the voltage for 100MHz by 25 - 50mV. Did the trick on my friends phone after I put cm on it.
Sent from my GT-I9000 using xda app-developers app
Thanks for the info, I don't have a custom kernel, and I can't change the voltage, should I install one?
Sent from my GT-I9000 using xda app-developers app
I think this could be a battery problem too.
Is your battery old ? Mine started getting crazy after 18 months of service.
Newer battery last longer that is a good point too (i bought a 1800mah battery)
CU
I also think it's a battery problem. Try a new one.
Thanks, my battery is almost 2 years old
Sent from my GT-I9000 using xda app-developers app
Change JVT modem
Hi !
I had the same issue (Sleep of death) when i was using JVT Stock ROM ! After moving to JVU and Lately JW4 the problem disappeared.
Flashing CM9 and keep on using the Stock Modem which is the JVT one bring back the Sleep of Death problems to surface, i moved to a JW4 modem by flashing it from the recovery and everything's fine for a week now !
doctor_vai said:
Hi !
I had the same issue (Sleep of death) when i was using JVT Stock ROM ! After moving to JVU and Lately JW4 the problem disappeared.
Flashing CM9 and keep on using the Stock Modem which is the JVT one bring back the Sleep of Death problems to surface, i moved to a JW4 modem by flashing it from the recovery and everything's fine for a week now !
Click to expand...
Click to collapse
Now that you re saying it, I had this problem on a JVT modem indeed.
Well lcalin77, try that solution first before buying new battery I guess ^^
I downgrade to 2.3.6 xxjw4 and re install the latest nightly 7/29 and went back to jvt, what am I doing wrong, how can i flash jw4 on cm9
Thank you
doctor_vai said:
Hi !
I had the same issue (Sleep of death) when i was using JVT Stock ROM ! After moving to JVU and Lately JW4 the problem disappeared.
Flashing CM9 and keep on using the Stock Modem which is the JVT one bring back the Sleep of Death problems to surface, i moved to a JW4 modem by flashing it from the recovery and everything's fine for a week now !
Click to expand...
Click to collapse
What i think you should do is :
1 - Wipe (means for the following Data + Cache) ;
2 - Flash Stock JVU with repartition (3 files version + pit) + Wipe ;
3 - Flash JW4 + Wipe ;
4 - Download and flash CM9 (I prefer the RC2 which is known being more stable, the nighties may bring some bugs to the ROM) + Wipe ;
5 - Install the Google Apps Package (The recommended version is "gapps-ics-20120317-signed") + Wipe again ;
6 - Flash the JW4 Modem from recovery after downloading it from : http://www.mediafire.com/?l1h126w7l8d57u5
7 - Once on the system wipe the internal sd card and restore your previously saved data on it (Don't restore app with titanium or so...)
7 - Hit thanks !
Proceed for the WHOLE operation with Sim card and External SD REMOVED !
Thank you very much
Sent from my GT-I9000 using xda app-developers app
It confuses me to no end why people are still on stock roms when there are awesome roms out there.
Check out this rom, its one of my favourites so far.
http://forum.xda-developers.com/showthread.php?t=1649345&highlight=f4k
lcalin77 said:
Thanks for the info, I don't have a custom kernel, and I can't change the voltage, should I install one?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Devil or semaphore should do you well. All up to you though! Do a nandroid and give it a shot!
Sent from my GT-I9000 using xda premium
My flashlight is not working on CM10 by Quarx,it flashes very weak,not with full potential. How to fix that?
Stop using it immediately, use the latest version of cm10. If you still have weak flashlight then its an hardware issue
Sent from my MB526 using xda premium
I am using this build: CM10-20121018-NIGHTLY-mb526 .
Flashlight was perfectly working,and then I flashed froyo .sbf because I wanted to go to CM10 and now its very weak.
Well, its a recent build with the flashlight issue solved that could burn the flashlight. But in your case I think it may be damaged depending on which froyo sbf you flashed.
You should try gb kernel and you can then use the cm10 builds, though I think it had suffered permanent hardware damage
Sent from my MB526 using xda premium
Can you give me the link for that GB kernel? I have MB525.
Dude just flash any gb sbf, preferably for your region
Sent from my MB526 using xda premium
I have upgraded my Defy+ to CM10.1 and I always got either AOSP crashes or gapps crashes.
I tried with many version of gapps, nothing. Complete data+cache factory reset, I also erased the /Android in SD card, nothing.
I even flashed SBF, still same result! Note that I do a data+cache reset every time.
Has anyone had success with this? I don't/can't post to the other thread with 1465 pages (that's insane..)
Thanks!
The 'other thread' is for CM10
CM 10.1 is still pre alpha ...
Are you sure where you are?
Sent from my MB526 using xda app-developers app
cmadle said:
The 'other thread' is for CM10
CM 10.1 is still pre alpha ...
Are you sure where you are?
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
It's ok..I know what to expect from pre-alpha. Still I was wondering if it was just me...