I have 7/12 nightly installed on my phone, and I noticed lately my phone is keep shutting off. It starts with no problems but I miss phone calls, messages. What can I do to fix this?
Thanks you.
Sent from my GT-I9000 using xda app-developers app
use stock
lcalin77 said:
I have 7/12 nightly installed on my phone, and I noticed lately my phone is keep shutting off. It starts with no problems but I miss phone calls, messages. What can I do to fix this?
Thanks you.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Your getting Sleep of Death. If using a custom kernel, disable deep idle. Also install voltage control (or nstools for custom kernel) and bump up the voltage for 100MHz by 25 - 50mV. Did the trick on my friends phone after I put cm on it.
Sent from my GT-I9000 using xda app-developers app
Thanks for the info, I don't have a custom kernel, and I can't change the voltage, should I install one?
Sent from my GT-I9000 using xda app-developers app
I think this could be a battery problem too.
Is your battery old ? Mine started getting crazy after 18 months of service.
Newer battery last longer that is a good point too (i bought a 1800mah battery)
CU
I also think it's a battery problem. Try a new one.
Thanks, my battery is almost 2 years old
Sent from my GT-I9000 using xda app-developers app
Change JVT modem
Hi !
I had the same issue (Sleep of death) when i was using JVT Stock ROM ! After moving to JVU and Lately JW4 the problem disappeared.
Flashing CM9 and keep on using the Stock Modem which is the JVT one bring back the Sleep of Death problems to surface, i moved to a JW4 modem by flashing it from the recovery and everything's fine for a week now !
doctor_vai said:
Hi !
I had the same issue (Sleep of death) when i was using JVT Stock ROM ! After moving to JVU and Lately JW4 the problem disappeared.
Flashing CM9 and keep on using the Stock Modem which is the JVT one bring back the Sleep of Death problems to surface, i moved to a JW4 modem by flashing it from the recovery and everything's fine for a week now !
Click to expand...
Click to collapse
Now that you re saying it, I had this problem on a JVT modem indeed.
Well lcalin77, try that solution first before buying new battery I guess ^^
I downgrade to 2.3.6 xxjw4 and re install the latest nightly 7/29 and went back to jvt, what am I doing wrong, how can i flash jw4 on cm9
Thank you
doctor_vai said:
Hi !
I had the same issue (Sleep of death) when i was using JVT Stock ROM ! After moving to JVU and Lately JW4 the problem disappeared.
Flashing CM9 and keep on using the Stock Modem which is the JVT one bring back the Sleep of Death problems to surface, i moved to a JW4 modem by flashing it from the recovery and everything's fine for a week now !
Click to expand...
Click to collapse
What i think you should do is :
1 - Wipe (means for the following Data + Cache) ;
2 - Flash Stock JVU with repartition (3 files version + pit) + Wipe ;
3 - Flash JW4 + Wipe ;
4 - Download and flash CM9 (I prefer the RC2 which is known being more stable, the nighties may bring some bugs to the ROM) + Wipe ;
5 - Install the Google Apps Package (The recommended version is "gapps-ics-20120317-signed") + Wipe again ;
6 - Flash the JW4 Modem from recovery after downloading it from : http://www.mediafire.com/?l1h126w7l8d57u5
7 - Once on the system wipe the internal sd card and restore your previously saved data on it (Don't restore app with titanium or so...)
7 - Hit thanks !
Proceed for the WHOLE operation with Sim card and External SD REMOVED !
Thank you very much
Sent from my GT-I9000 using xda app-developers app
It confuses me to no end why people are still on stock roms when there are awesome roms out there.
Check out this rom, its one of my favourites so far.
http://forum.xda-developers.com/showthread.php?t=1649345&highlight=f4k
lcalin77 said:
Thanks for the info, I don't have a custom kernel, and I can't change the voltage, should I install one?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Devil or semaphore should do you well. All up to you though! Do a nandroid and give it a shot!
Sent from my GT-I9000 using xda premium
Related
I'm looking for the most stable and 100% stock 2.3.3 firmware for the SGS. I did a search but the threads were too old. Any suggestions, especially since I read many 2.3.3 suffer from battery issues ? Some of the newer 2.3.3 ROMs I tested (Asian) gave me weird brightness issues (screen changing brightness constantly).
Why ?
Just flash via odin the stock 2.3.4 jvq dedoexe and flash with it kernel dark core
Or install custom rom
Sent from my GT-I9000 using XDA Premium App
ayhamx360 said:
Why ?
Just flash via odin the stock 2.3.4 jvq dedoexe and flash with it kernel dark core
Or install custom rom
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
No. JVQ is too buggy for me (Phone app crashes) and brightness blinds me at night. I like to keeps things stock and not install kernels or other stuff.
I use JPI as it is an oficially released 2.3.3
I did not notice any bugs.
JVP is not oficially?
Netman_ said:
JVP is not oficially?
Click to expand...
Click to collapse
It is, but 2.3.4
Sent from my GT-I9000 using XDA Premium App
Netman_ said:
JVP is not oficially?
Click to expand...
Click to collapse
no it isnt official!!! Just leaked test software...
Sent from my GT-I9000
I like JVO although I believe that JVH gave me better battery life.
ayhamx360 said:
Why ?
Just flash via odin the stock 2.3.4 jvq dedoexe and flash with it kernel dark core
Or install custom rom
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Where did you find JVQ Deodexed whit no bugs?
criscan - Sent from my I9000 - XDA Premium app
i will suggest to use the jvq 2.3.4. I'm on stock + speedmod and after the fix for the phone.apk everything is fast and very stable
I'm on JVH stock (XEN) and it gives better battery life than unofficial stock JVP. It is a bit laggy though but with speedmod kernel and ext4 it is just fine
Hi Now am using 2.3.7 version and kernal 2.6.32.9-gb in my defy,
Am planing to install ICS 4.0.3.What kernal should download?
Becoz i already tried Mar 3 build but its stucked many times and getting restarted again so pls tel the correct methods and kernal.GApps.
Can any one help me?
If you have gingerbread kernel you need to install a Defy+ build. If you have a normal defy, I think you need to install batery fix as well. I'll try to find it. Defy+ builds work well with red lense defys, but I don't think camera works for green lense users.
Thanks...so shall I install defy + build...and kernal link available separately....what is the use of those kernal...how. and wat should be install
Sent from my MB525 using XDA
You already have a kernel. Or else you wouldn't be able to use the phone. You've already told me that you have a gingerbread kernel. So don't bother flashing a new one.
Gapps is on first page for main CM9 thread. Battery fix is somewhere in the thread :-/ Look around page 300
Sent from my Defy+ using xda premium (app needs update!) Hit the thanks button if I could help ;-)
So defy + build and gapps,should I wipe data and cache? Procedure pls
Sent from my MB525 using XDA
Se the main CM9 thread! -first page
EDIT: Don't install the cm9 kernel! It gives bootloader error
Sent from my Defy+ using xda premium (app needs update!) Hit the thanks button if I could help ;-)
in march 17 defy+ build not availiable
Sent from my MB525 using XDA
Use quarx2k.ru to get Quarx's Cm9 Defy+ nightly
Sent from my Defy+ using xda premium (app needs update!)
Will it create any issue if I install cm9 kernal...can I use mine without cm9 kernel
Sent from my MB525 using XDA
madhavandeffy said:
Will it create any issue if I install cm9 kernal...can I use mine without cm9 kernel
Sent from my MB525 using XDA
Click to expand...
Click to collapse
CM9 Kernel gives bootloader error. It's for froyo kernel users only (as far as i've understood)
DON'T flash it! It will soft brick your phone!
fiskenigaten said:
CM9 Kernel gives bootloader error. It's for froyo kernel users only (as far as i've understood)
DON'T flash it! It will soft brick your phone!
Click to expand...
Click to collapse
I hope all doubts over
CM9 builds,gapps & battery fix is enough to my phone to run ICS.
Have to flash above three things?
Am i right?
Yup, that should be it.
Battery fix for RED LENSE Defy:
http://forum.xda-developers.com/showpost.php?p=23178127&postcount=1566
Is der any settings to be done after flash battery fix
Sent from my MB525 using XDA
If you mean anything else to install, then no. Does charging work?
Sent from my Defy+ using xda premium (app needs update!)
fiskenigaten said:
CM9 Kernel gives bootloader error. It's for froyo kernel users only (as far as i've understood)
DON'T flash it! It will soft brick your phone!
Click to expand...
Click to collapse
That is true. I have a Defy+ and I installed the CM9 kernel. It soft bricked my phone and I had to do a SBF flash, root CWM recovery and all things all over!! Flash the CM9 built for Defy+ by Quarx. It does restarts and freezes ocassionally but is okay otherwise for a beta version!!
As has been reported, some of us have problems with Wi-Fi on LG6/8.
Found an application that seems to be working here so far.
'FXR WiFi fix and rescue' found on the Play Market.
As always do a CWM backup just incase
I am using stock LG8 with latest Siyah kernel 1.4beta.
Sent from my GT-I9300 using xda app-developers app
What is LG6/8 .?
I believe flashing the new Siyah Kernel will fix the problem. What kind of problems are you guys having anyways?
pwave said:
What is LG6/8 .?
Click to expand...
Click to collapse
Firmware version or baseband/ modem version .
jje
Thanx will try this
Sent from my GT-I9300 using Tapatalk 2
SlimJ87D said:
I believe flashing the new Siyah Kernel will fix the problem. What kind of problems are you guys having anyways?
Click to expand...
Click to collapse
It probably did, was just driving me nuts yesterday :banghead: get that for being flash happy with new firmware
Sent from my GT-I9300 using xda app-developers app
Hi, I root my defy+ and i have a little problem. When i'm trying to call somebody, my camera try to turn on (make that sound when i access the camera)
I have JB 4.1.2 Quarx 24.09
That is quite an old ROM. Newer ones have less bugs. Maybe you could try upgrading.
Sent from my MB526 using xda app-developers app
domokos said:
That is quite an old ROM. Newer ones have less bugs. Maybe you could try upgrading.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
with the last update, my signal is gone )
Sorry to hear. I have no problems with the 23/12 ROM. I use it with JellyX kernel.
Sent from my MB526 using xda app-developers app
I flash 23/12 and the signal is back ) ... and my problem with camera disappeared ... i hope
Too slow.. I think i do someting wrong... I flash it yesterday but is crushing and crushing again... It not turning off.. only from boot
Q - am i need anything to flash the rom but that zip from quarx?...
Wipe data/dalwik instalat rom wipe data/dalwik instalat gaps wipe data/dalwik and restant...
Recently i installed CM10.1 stable(clean install).
After i applyed franco kernel it rebooted then 2 weeks after i uninstalled Tasker after it was done it gone for reboot.
I extracted last_kmsg.txt and it just said at the end Reason:Reboot.
No UVs or OCs all default settings from kernel.
http://db.tt/QWqFEqqm
Not only reboots but my phone turns off just without a reason when i am playing music. Think i am going to flash paranoid again
(Using cm kernel btw)
Sent from my Nexus 4 using xda app-developers app
sonikk4ever said:
Not only reboots but my phone turns off just without a reason when i am playing music. Think i am going to flash paranoid again
(Using cm kernel btw)
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I think im gonna wait for Android 4.3 update then go back to stock just whit root,im not doing flash 4.3 sysdump thing.
how about try the 10.1.2?
http://get.cm/get/jenkins/34261/cm-10.1.2-mako.zip
it runs pretty stable for my daily driver, never slows down or even reboots itself. im using matr1x kernel on default setting.
did you undevolt?
Sent from my Nexus 4 using Tapatalk 2
The nightlys have been rock solid for me
Guyz im on lastest CM10.1 whit FK kernel but still i have issues whit screen flickering and more.I think its device hardware itself.
Karlo666 said:
Guyz im on lastest CM10.1 whit FK kernel but still i have issues whit screen flickering and more.I think its device hardware itself.
Click to expand...
Click to collapse
have u tried going back to stock first? i believe it's a hardware issue because in my experiences using so many custom roms based on aosp, cm and aokp, i never even seen the screen flickering issue at all.
Sent from my Nexus 4 using Tapatalk 2